NSF Product and Service Listings
These NSF Official Listings are current as of Monday, July 22, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=C0219118&Standard=061&
NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects
Drinking Water System Components - Health Effects
NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.
Hyosung Chemical Corporation | |
235, Banpo-daero, Seocho-gu | |
Seoul 06578 | |
Korea, Republic of | |
82 31 428 1352 | |
Visit this company's website |
Facility : Chungcheongnam-Do, Korea, Republic of
Potable Water Materials
Water | Water | |||
Contact | Contact | |||
Trade Designation | End Use | Temp | Material | |
Potable Water Materials |
||||
M33FG(a)A-BK(b)[1] [2] | A,F,P | C. HOT | PK | |
M33FG(a)A-NP0[1] [2] | A,F,P | C. HOT | PK | |
[1] Certified for a maximum surface area to volume ratio of 60 square inches/L. [2] In the tradenames NP0 indicates Natural color and BK indicates Black color. (a) and (b) represent the following: (a) - One digit number (0 - 9) is used to indicate the ratio of glass fiber (b) - One digit number (0 -2) is used to indicate the different ratios of black masterbatch used for each grade of M33FG(a)A. The (b) does not indicate the same amount of black masterbatch, but instead indicates a random product number of each black grade. |
Facility : Gyeonggi Do, Ansung-Si, Republic of Korea
Potable Water Materials
Water | Water | |||
Contact | Contact | |||
Trade Designation | End Use | Temp | Material | |
Potable Water Materials |
||||
M33FG(a)A-BK(b)[1] [2] | A,F,P | C. HOT | PK | |
M33FG(a)A-NP0[1] [2] | A,F,P | C. HOT | PK | |
[1] Certified for a maximum surface area to volume ratio of 60 square inches/L. [2] In the tradenames NP0 indicates Natural color and BK indicates Black color. (a) and (b) represent the following: (a) - One digit number (0 - 9) is used to indicate the ratio of glass fiber (b) - One digit number (0 -2) is used to indicate the different ratios of black masterbatch used for each grade of M33FG(a)A. The (b) does not indicate the same amount of black masterbatch, but instead indicates a random product number of each black grade. |
Facility : Ulsan, Republic of Korea
Potable Water Materials
Water | Water | |||
Contact | Contact | |||
Trade Designation | End Use | Temp | Material | |
Potable Water Materials |
||||
Polyketone M330F[2] | A,F,P | C. HOT | PK | |
Polyketone M620F[1] | A,F,P | C. HOT | PK | |
Polyketone M630F[1] | A,F,P | C. HOT | PK | |
Polyketone M730F[1] | A,F,P | C. HOT | PK | |
Polyketone M930F[2] | A,F,P | C. HOT | PK | |
[1] Certified for Pipe, Appurtenance, and Fitting end use not to exceed 160 square inches per liter. [2] Certified for Pipe, Appurtenance, and Fitting end use not to exceed 55 square inches per liter. |
Number of matching Manufacturers is 1
Number of matching Products is 9
Processing time was 0 seconds