NSF Product and Service Listings

These NSF Official Listings are current as of Monday, July 22, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=C0236488&Standard=061&


NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.

 
PINTURAS VILLADA SKC S.A. 
Ctra. Villalon 9-11
Villada/Palencia 
34340 
Spain 
34 979 847 251
Visit this company's website


Facility : Villada/Palencia, Spain

Protective (Barrier) Materials

    Water Water
  Water Contact Contact Contact
Trade Designation Size Restriction Temp Material

Coatings - Fittings [G]
Protecfull SFP 108[1] >= 4" D. HOT PUR
Protecfull SFP 108 Repair Kit[1] [2] >= 4" D. HOT PUR 

[1] Colors: White, blue
    Number of Coats: 1-2
    Maximum Field Use Dry Film Thickness (in mils): 600 microns (23.6 mils)
    Re-coat Cure Time and Temperature: 3 days at 23°C
    Final Cure Time and Temperature: 10 days at 23°C
    Special Comments: Mix ratio of Part B:Part A (Polyol:Isocyanate) is 3:1 by volume.
    Application by twin feed HOT airless spray at minimum 50ºC for each component.
[2] The Protecfull SFP 108 Repair Kit is only for use on areas coated with Protecfull SFP
    108.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Coatings - Pipe [G]
Protecfull SFP 108[1] >= 4" D. HOT PUR
Protecfull SFP 108 Repair Kit[1] [2] >= 4" D. HOT PUR 

[1] Colors: White, blue
    Number of Coats: 1-2
    Maximum Field Use Dry Film Thickness (in mils): 600 microns (23.6 mils)
    Re-coat Cure Time and Temperature: 3 days at 23°C
    Final Cure Time and Temperature: 10 days at 23°C
    Special Comments: Mix ratio of Part B:Part A (Polyol:Isocyanate) is 3:1 by volume.
    Application by twin feed HOT airless spray at minimum 50ºC for each component.
[2] The Protecfull SFP 108 Repair Kit is only for use on areas coated with Protecfull SFP
    108.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Coatings - Pump [G]
Protecfull SFP 108[1] >= 4" D. HOT PUR
Protecfull SFP 108 Repair Kit[1] [2] >= 4" D. HOT PUR 

[1] Colors: White, blue
    Number of Coats: 1-2
    Maximum Field Use Dry Film Thickness (in mils): 600 microns (23.6 mils)
    Re-coat Cure Time and Temperature: 3 days at 23°C
    Final Cure Time and Temperature: 10 days at 23°C
    Special Comments: Mix ratio of Part B:Part A (Polyol:Isocyanate) is 3:1 by volume.
    Application by twin feed HOT airless spray at minimum 50ºC for each component.
[2] The Protecfull SFP 108 Repair Kit is only for use on areas coated with Protecfull SFP
    108.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Coatings - Tank [G]
Protecfull SFP 108[1] >= 20,000 gal. D. HOT PUR
Protecfull SFP 108 Repair Kit[1] [2] >= 20,000 gal. D. HOT PUR 

[1] Colors: White, blue
    Number of Coats: 1-2
    Maximum Field Use Dry Film Thickness (in mils): 600 microns (23.6 mils)
    Re-coat Cure Time and Temperature: 3 days at 23°C
    Final Cure Time and Temperature: 10 days at 23°C
    Special Comments: Mix ratio of Part B:Part A (Polyol:Isocyanate) is 3:1 by volume.
    Application by twin feed HOT airless spray at minimum 50ºC for each component.
[2] The Protecfull SFP 108 Repair Kit is only for use on areas coated with Protecfull SFP
    108.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Coatings - Valve [G]
Protecfull SFP 108[1] >= 4" D. HOT PUR
Protecfull SFP 108 Repair Kit[1] [2] >= 4" D. HOT PUR 

[1] Colors: White, blue
    Number of Coats: 1-2
    Maximum Field Use Dry Film Thickness (in mils): 600 microns (23.6 mils)
    Re-coat Cure Time and Temperature: 3 days at 23°C
    Final Cure Time and Temperature: 10 days at 23°C
    Special Comments: Mix ratio of Part B:Part A (Polyol:Isocyanate) is 3:1 by volume.
    Application by twin feed HOT airless spray at minimum 50ºC for each component.
[2] The Protecfull SFP 108 Repair Kit is only for use on areas coated with Protecfull SFP
    108.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.
Number of matching Manufacturers is 1
Number of matching Products is 10
Processing time was 0 seconds