NSF Product and Service Listings
These NSF Official Listings are current as of Saturday, August 24, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=C0274986&Standard=061&
NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects
Drinking Water System Components - Health Effects
NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.
Trelleborg Sealing Solutions US Inc. | |
2509 Bremer Road | |
Fort Wayne, IN 46803 | |
United States | |
800-323-0496 | |
260-748-5774 |
Facility : Tatu Taichung, Taiwan
Joining and Sealing Materials
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Gasket/Sealing Materials |
||||
E6W01 | [2] | C. HOT | EPDM | |
E7W12 | [2] | C. HOT | EPDM | |
E8W05 | [2] | C. HOT | EPDM | |
N6W01[3] | [1] | C. HOT | NBR | |
N7W05[3] | [1] | C. HOT | NBR | |
N8W06[3] | [1] | C. HOT | NBR | |
[1] Certified for a maximum surface area to volume ratio of 0.5 sq. in./L. [2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L. [3] This product has also been evaluated for use in Mechanical Plumbing Device applications with a maximum use restriction of 0.1 sq. in./L. |
||||
O-Rings |
||||
E6W01 | [2] | C. HOT | EPDM | |
E7W12 | [2] | C. HOT | EPDM | |
E8W05 | [2] | C. HOT | EPDM | |
N6W01[3] | [1] | C. HOT | NBR | |
N7W05[3] | [1] | C. HOT | NBR | |
N8W06[3] | [1] | C. HOT | NBR | |
[1] Certified for a maximum surface area to volume ratio of 0.5 sq. in./L. [2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L. [3] This product has also been evaluated for use in Mechanical Plumbing Device applications with a maximum use restriction of 0.1 sq. in./L. |
Number of matching Manufacturers is 1
Number of matching Products is 12
Processing time was 0 seconds