NSF Product and Service Listings

These NSF Official Listings are current as of Sunday, December 08, 2019 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=C0285013&Standard=061&



NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings.


 
Ashland LLC 
5200 Blazer Parkway
Dublin, OH 43017 
United States 
614-790-3333


Facility : Los Angeles, CA

Protective (Barrier) Materials

    Water Water
  Water Contact Contact Contact
Trade Designation Size Restriction Temp Material

Resin[1] [2] [G]
DERAKANE 411-350 WSR Epoxy Vinyl Ester Resin [4] CLD 23 VE
DERAKANE 411-350 WSR Epoxy Vinyl Ester Resin [3] CLD 23 VE
DERAKANE 411-350 WSR-20 Epoxy Vinyl Ester Resin [4] CLD 23 VE

[1] Please refer to the Ashland Technical Datasheet for system requirements.
[2] Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 15
    Recoat Cure Time and Temperature: 2-100 hours at ambient temperature
    Final Cure Time and Temperature: 4 hours at 180°F
[3] Certification of DERAKANE 411-350 WSR Epoxy Vinyl Ester Resin is for use as the resin in
    coating systems used on pipes 16" and greater or in tanks 150 gallons and greater when
    used with the BPO/DMA Cure.
[4] Certification ofDERAKANE 411-350 WSR Epoxy Vinyl Ester Resin and DERAKANE 411-350 WSR-20
    EpoxyVinyl Ester Resin is for use as the resin in coating systems used on pipes 1/2”and
    greater or in tanks 5 gallons and greater when used with the MEKP Cure.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



Facility : Philadelphia, PA

Protective (Barrier) Materials

    Water Water
  Water Contact Contact Contact
Trade Designation Size Restriction Temp Material

Resin[1] [2] [G]
Derakane™ Signia™ 411 WSR resin [3] CLD 23 VE

[1] Please refer to the Ashland Technical Datasheet for system requirements.
[2] Color: Amber
    Number of Coats: 1
    Maximum Field Use Dry Film thickness (in mils): 15
    Recoat Cure Time and Temperature: 2  - 100 hours at ambient temperature
    Final Cure Time / Temperature: 4 hours at 180°F
[3] Derakane™ Signia™ 411WSR resin is Certified for use as the resin in coating systems for
    pipes 36” and greater and tanks 2000 gallons and greater when used with the MEKP Cure
    and pipes 18” and greater or in tanks 300 gallons and greater when used with BPO/DMA
    cure.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Number of matching Manufacturers is 1
Number of matching Products is 4
Processing time was 0 seconds