NSF Product and Service Listings
These NSF Official Listings are current as of Monday, July 22, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=C0293030&Standard=061&
NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects
Drinking Water System Components - Health Effects
NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.
Teknoseal Engineering Solutions | |
Bindu Apartments, 54 Anand Park | |
3rd Lane, Aundh | |
Pune, Maharashtra 411007 | |
India | |
91 976 3707216 |
Facility : Pune, Maharashtra, India
Joining and Sealing Materials
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Impregnation Resins[1] [2] |
||||
TSP 99 U | [3] | C. HOT | SLT | |
[1] Certified for use with metallic materials having no greater than 10% porosity. [2] Certified for the following impregnation process/cure (Catalyst must be added at 0.4% by weight to the sealant just prior to dry vacuum process): Step 1: Dry Vacuum Step 2: Wet Vacuum Step 3: Draining of the castings in a drain chamber or a centrifuge (15-20 minutes). Step 4: Cold water wash of the castings (minimum 15 degrees Celsius for 15-20 minutes). Step 5: Hot Water curing of the castings by dipping them in hot water at 90 - 95 deg C for 10 minutes. [3] Certified for a maximum surface area to volume ratio of 50 square inches per liter. |
Number of matching Manufacturers is 1
Number of matching Products is 1
Processing time was 0 seconds