NSF Product and Service Listings
These NSF Official Listings are current as of Monday, July 22, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=C0314194&Standard=061&
NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects
Drinking Water System Components - Health Effects
NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.
Satori Seal Corporation | |
8455 Utica Avenue | |
Rancho Cucamonga, CA 91730 | |
United States | |
800-322-8366 | |
909-987-8234 | |
Visit this company's website |
Facility : # 1 Vietnam
Joining and Sealing Materials
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Gasket/Sealing Materials |
||||
E5012P-10[3] | [2] | C. HOT | EPDM | |
E6012-45[4] | [2] | C. HOT | EPDM | |
E7012-50IR[3] | [2] | C. HOT | EPDM | |
E7012P-10[3] | [2] | D. HOT | EPDM | |
E8012P-10[3] | [2] | C. HOT | EPDM | |
N7012-20[1] | [2] | C. HOT | NBR | |
S6012F-00[3] | [2] | C. HOT | SLC | |
[1] This product has also been evaluated for use in Mechanical Plumbing Device applications with a maximum use restriction of 0.1 sq. in./L. [2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L. [3] This product has also been evaluated for use in Mechanical Plumbing Device applications with a maximum use restriction of 2.0 sq. in./L. [4] This product has also been evaluated for use in Mechanical Plumbing Device application with a maximum use restriction of 0.4 sq. in./L. |
||||
O-Rings |
||||
E5012P-10[3] | [2] | C. HOT | EPDM | |
E6012-45[4] | [2] | C. HOT | EPDM | |
E7012-50IR[3] | [2] | C. HOT | EPDM | |
E7012P-10[3] | [2] | D. HOT | EPDM | |
E8012P-10[3] | [2] | C. HOT | EPDM | |
N7012-20[1] | [2] | C. HOT | NBR | |
S6012F-00[3] | [2] | C. HOT | SLC | |
[1] This product has also been evaluated for use in Mechanical Plumbing Device applications with a maximum use restriction of 0.1 sq. in./L. [2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L. [3] This product has also been evaluated for use in Mechanical Plumbing Device applications with a maximum use restriction of 2.0 sq. in./L. [4] This product has also been evaluated for use in Mechanical Plumbing Device application with a maximum use restriction of 0.4 sq. in./L. |
Number of matching Manufacturers is 1
Number of matching Products is 14
Processing time was 0 seconds