NSF Product and Service Listings

These NSF Official Listings are current as of Monday, July 22, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=C0385585&Standard=061&


NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.

 
Aqua Gas Plastic Industries- AQUATERRA 
Street 30, Community 597, Dip 2
Dubai 56790 
United Arab Emirates 
971 48 829 588
Visit this company's website


Facility : Dubai, United Arab Emirates

Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings[1] [G]
AQUATERRA Fittings[2] 20 mm - 160 mm C. HOT PP 

[1] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[2] The following models are requested for certification:
    
    Coupler (Hub x Hub)
    AT6554020 (20 mm)
    AT6554025 (25 mm)
    AT6554032 (32 mm)
    AT6554040 (40 mm)
    AT6554050 (50 mm)
    AT6554063 (63 mm)
    AT6554075 (75 mm)
    AT6554090 (90 mm)
    AT6554110 (110 mm)
    AT6554125 (125 mm)
    AT6554160 (160 mm)
    
    Elbow 45° (Hub x Hub)
    AT6556020 (20 mm)
    AT6556025 (25 mm)
    AT6556032 (32 mm)
    AT6556040 (40 mm)
    AT6556050 50 mm)
    AT6556063 (63 mm)
    AT6556075 (75 mm)
    AT6556090 (90 mm)
    AT6556110 (110 mm)
    AT6556125 (125 mm)
    AT6556160 (160 mm)
    
    Elbow 90° (Hub x Hub)
    AT6555020 (20 mm)
    AT6555025 (25 mm)
    AT6555032 (32 mm)
    AT6555040 (40 mm)
    AT6555050 (50 mm)
    AT6555063 (63 mm)
    AT6555075 (75 mm)
    AT6555090 (90 mm)
    AT6555110 (110 mm)
    AT6555125 (125 mm)
    AT6555160 (160 mm)
    
    Equal Tee (Hub x Hub x Hub)
    AT6557020 (20 mm)
    AT6557025 (25 mm)
    AT6557032 (32 mm)
    AT6557040 (40 mm)
    AT6557050 (50 mm)
    AT6557063 (63 mm)
    AT6557075 (75 mm)
    AT6557090 (90 mm)
    AT6557110 (110 mm)
    AT6557125 (125 mm)
    AT6557160 (160 mm)
    
    End Cap
    AT6665020 (20 mm)
    AT6665025 (25 mm)
    AT6665032 (32 mm)
    AT6665040 (40 mm)
    AT6665050 (50 mm)
    AT6665063 (63 mm)
    AT6665075 (75 mm)
    AT6665090 (90 mm)
    AT6665110 (110 mm)
    AT6665125 (125 mm)
    AT6665160 (160 mm)
    
    Reducer (Hub x Hub)
    AT6563220 (32mm x 20 mm)
    AT6563225 (32mm x 25 mm)
    AT6564025 (40mm x 25mm)
    AT6565025 (50mm x 25mm)
    AT6564032 (40mm x 32 mm)
    AT6565032 (50mm x 32mm)
    AT6566332 (63mm x 32mm)
    AT6565040 (50mm x 40mm)
    AT6566340 (63mm x 40mm)
    AT6567540 (75mm x 40mm)
    AT6566350 (63mm x 50mm)
    AT6567550 (75mm x 50mm)
    AT6569040 (90mm x 40mm)
    AT6569050 (90mm x 50mm)
    AT6567563 (75mm x 63mm)
    AT6569063 (90mm x 63mm)
    AT6569075 (90mm x 75mm)
    AT6561075 (REDUCER 110/75mm)
    AT6561090 (REDUCER 110/90mm)
    AT6561210 (REDUCER 125/110mm)
    AT6561610 (REDUCER 160/110mm)
    AT6561612 (REDUCER 160/125mm)
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Pipe[1] [G]
AQUATERRA FASER PIPE[3] 20 mm - 160 mm C. HOT PP
AQUATERRA PP-R PIPE[4] 20 mm - 160 mm C. HOT PP 

[1] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[3] The following sizes are requested for certification:
    
    SDR6 Pipe
    AT6612025 (20 mm x 3.4 mm)
    AT6612525 (25 mm x 4.2 mm)
    AT6613225 (32 mm x 5.4 mm)
    AT6614025 (40 mm x 6.7 mm)
    AT6615025 (50 mm x 8.3 mm)
    AT6616325 (63 mm x 10.5 mm)
    AT6617525 (75 mm x 12.5 mm)
    AT6619025 (90 mm x 15.0 mm)
    AT6601025 (110 mm x 18.3 mm)
    AT6601225 (125 mm x 20.8 mm)
    AT6601625 (160 mm x 26.6 mm)
    
    SDR 7.4 Pipe
    AT6612020 (20 mm x 2.8 mm)
    AT6612520 (25 mm x 3.5 mm)
    AT6613220 (32 mm x 4.4 mm)
    AT6614020 (40 mm x 5.5 mm)
    AT6615020 (50 mm x 6.9 mm)
    AT6616320 (63 mm x 8.6 mm)
    AT6617520 (75 mm x 10.3 mm)
    AT6619020 (90 mm x 12.3 mm)
    AT6601020 (110 mm x 15.1 mm)
    AT6601620 (160 mm x 21.9 mm)
[4] The following sizes are requested for certification:
    
    SDR6 Pipe
    AT6602020 (20 mm x 3.4 mm)
    AT6602520 (25 mm x 4.2 mm)
    AT6603220 (32 mm x 5.4 mm)
    AT6604020 (40 mm x 6.7 mm)
    AT6605020 (50 mm x 8.3 mm)
    AT6606320 (63 mm x 10.5 mm)
    AT6607520 (75 mm x 12.5 mm)
    AT6609020 (90 mm x 15.0 mm)
    AT6601020 (110 mm x 18.3 mm)
    AT6601220 (125 mm x 17.1 mm)
    AT6601620 (160 mm x 26.6 mm)
    
    SDR 7.4 Pipe
    AT6602016 (20 mm x 2.8 mm)
    AT6602516 (25 mm x 3.5 mm)
    AT6603216 (32 mm x 4.4 mm)
    AT6604016 (40 mm x 5.5 mm)
    AT6605016 (50 mm x 6.9 mm)
    AT6606316 (63 mm x 8.6 mm)
    AT6607516 (75 mm x 10.3 mm)
    AT6609016 (90 mm x 12.3 mm)
    AT6601016 (110 mm x 15.1 mm)
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Number of matching Manufacturers is 1
Number of matching Products is 3
Processing time was 0 seconds