NSF Product and Service Listings

These NSF Official Listings are current as of Monday, July 22, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=C0398965&Standard=061&


NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.

 
Hindware Limited 
301-302 Park Centra, 3rd Floor
Sector 30, N. H. 8, Gurgaon 
Haryana 122001 
India 
91 406 6288000
Visit this company's website


Facility : Hyderabad, India

Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings[1] [2] [G]
TRUFLO CPVC Fitting 1/2" - 4" C. HOT CPVC 

[1] Certified for the following configurations:
    
    Coupler
    CF01000015 15 mm (½”)
    CF01000020 20 mm (¾”)
    CF01000025 25 mm (1”)
    CF01000032 32 mm (1¼”)
    CF01000040 40 mm (1½”)
    CF01000050 50 mm (2”)
    CF19000065 65 mm (2½”)
    CF19000080 80 mm (3”)
    CF19000100 100 mm (4”)
    
    Elbow 90°
    CF02000015 15 mm (½”)
    CF02000020 20 mm (¾”)
    CF02000025 25 mm (1”)
    CF02000032 32 mm (1¼”)
    CF02000040 40 mm (1½”)
    CF02000050 50 mm (2”)
    CF20000065 65 mm (2½”)
    CF20000080 80 mm (3”)
    CF20000100 100 mm (4”)
    
    Bend 45°
    CF03000015 15 mm (½”)
    CF03000020 20 mm (¾”)
    CF03000025 25 mm (1”)
    CF03000032 32 mm (1¼”)
    CF03000040 40 mm (1½”)
    CF03000050 50 mm (2”)
    Reducer Elbow 90°
    CF04020015 20 x 15 mm (¾ x ½”)
    CF04025015 25 x 15 mm (1 x ½”)
    CF04025020 25 x 20 mm (1 x ¾”)
    
    Tee 90°
    CF05000015 15 mm (½”)
    CF05000020 20 mm (¾”)
    CF05000025 25 mm (1”)
    CF05000032 32 mm (1¼”)
    CF05000040 40 mm (1½”)
    CF05050050 50 mm (2”)
    CF21000065 65 mm (2½”)
    CF21000080 80 mm (3”)
    CF21000100 100 mm (4”)
    
    Reducer Tee 90°
    CF06020015 20 x 15 mm (¾ x ¾ x ½”)
    CF06025015 25 x 15 mm (1 x 1 x ½”)
    CF06025020 25 x 20 mm (1 x 1 x ¾”)
    CF06032015 32 x 15 mm (1¼ x 1¼ x ½”)
    CF06032020 32 x 20 mm (1¼ x 1¼ x ¾”)
    CF06032025 32 x 25 mm (1¼ x 1¼ x 1”)
    CF06040015 40 x 15 mm (1½ x 1½ x ½”)
    CF06040020 40 x 20 mm (1½ x 1½ x ¾”) 
    CF06040025 40 x 25 mm (1½ x 1½ x 1”)
    CF06040032 40 x 32 mm (1½ x 1½ x 1¼”)
    CF06050015 50 x 15 mm (2 x 2 x 1½”)
    CF06050020 50 x 20 mm (2 x 2 x ¾”)
    CF06050025 50 x 25 mm (2 x 2 x 1”)
    CF06050032 50 x 32 mm (2 x 2 x 1¼”)
    CF06050040 50 x 40 mm (2 x 2 x 1½”)
    
    Cross Tee 90°
    CF07000015 15 mm (½”)
    CF07000020 20 mm (¾”)
    
    End Cap
    CF08000015 15 mm (½”)
    CF08000020 20 mm (¾”)
    CF08000025 25 mm (1”)
    CF08000032 32 mm (1¼”)
    CF08000040 40 mm (1½”)
    CF08050050 50 mm (2”)
    
    Reducer Bush
    CF09020015 20 x 15 mm (¾ x ½”)
    CF09025015 25 x 15 mm (1 x ½”)
    CF09025020 25 x 20 mm (1 x ¾")
    CF09032015 32 x 15 mm (1¼ x ½")
    CF09032020 32 x 20 mm (1¼ x ¾")
    CF09032025 32 x 25 mm (1¼ x 1")
    CF09040015 40 x 15 mm (1½ x ½”)
    CF09040020 40 x 20 mm (1½ x ¾”)
    CF09040025 40 x 25 mm (1½ x 1”)
    CF09040032 40 x 32 mm (1½ x 1¼”)
    CF09050015 50 x 15 mm (2 x ½”)
    CF09050020 50 x 20 mm (2 x ¾”)
    CF09050025 50 x 25 mm (2 x 1”)
    CF09050032 50 x 32 mm (2 x 1¼”)
    CF09050040 50 x 40 mm (2 x 1½”)
    CF22065050 65 x 50 mm (2½ x 2”)
    CF22080065 80 x 65 mm (3 x 2½”)
    CF22080050 80 x 50 mm (3 x 2”)
    CF22100080 100 x 80 mm (4 x 3”)
    CF22100065 100 x 65 mm (4 x 2½”)
    CF22100050 100 x 50 mm (4 x 2”)
[2] Certified for the following configurations:
    
    Male Adaptor Plastic Threaded (MAPT)
    CF10000015 15 mm (½”)
    CF10000020 20 mm (¾”)
    CF10000025 25 mm (1”)
    CF10000032 32 mm (1¼”)
    CF10000040 40 mm (1½”)
    CF10000050 50 mm (2”)
    
    Female Adaptor Plastic Threaded (FAPT)
    CF11000015 15 mm (½”)
    CF11000020 20 mm (¾”)
    CF11000025 25 mm (1”)
    CF11000032 32 mm (1¼”)
    CF11000040 40 mm (1½”)
    CF11000050 50 mm (2”)
    
    Reducer
    CF15020015 20 x 15 mm (¾ x ½”)
    CF15025020 25 x 20 mm (1 x ¾")
    CF15025015 25 x 15 mm (1 x ½”)
    CF15032015 32 x 15 mm (1¼ x ½")
    CF15032020 32 x 20 mm (1¼ x ¾")
    CF15032025 32 x 25 mm (1¼ x 1")
    CF15040015 40 x 15 mm (1½ x ½”)
    CF15040020 40 x 20 mm (1½ x ¾”)
    CF15040025 40 x 25 mm (1½ x 1”)
    CF15040032 40 x 32 mm (1½ x 1¼”)
    CF15050015 50 x 15 mm (2 x ½”)
    CF15050020 50 x 20 mm (2 x ¾”)
    CF15050025 50 x 25 mm (2 x 1”)
    CF15050032 50 x 32 mm (2 x 1¼”)
    CF15050040 50 x 40 mm (2 x 1½”)
    
    Transition Bushing (IPS x CTS)
    CF16015015 15 x 15 mm (½ x ½”)
    CF16020020 20 x 20 mm (¾ x ¾”)
    CF16025025 25 x 25 mm (1 x 1”)
    CF16032032 32 x 32 mm (1¼ x 1¼”)
    CF16040040 40 x 40 mm (1½ x 1½”)
    CF16050050 50 x 50 mm (2 x 2”)
    CF23065050 65 x 50 mm (2½ x 2”)
    CF23080050 80 x 50 mm (3 x 2”)
    CF23100050 100 x 50 mm (4 x 2”)
    
    Reducer Male Threaded Adaptor
    CF17020015 20 x 15 mm (¾ x ½”)
    CF17025020 25 x 20 mm (1 x ¾”)
    
    Step Over Bend
    CF18000020 20 mm (¾”)
    CF18000025 25 mm (1”)
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Number of matching Manufacturers is 1
Number of matching Products is 1
Processing time was 0 seconds