NSF Product and Service Listings
These NSF Official Listings are current as of Tuesday, November 4, 2025 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=C0420415&Standard=061&
NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects
Drinking Water System Components - Health Effects
NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.
| Piedmont Pacific, Inc. | |
| 300 Rue Street - Vallier Est | |
| Suite 340 | |
| Quebec, QC G1K 9C5 | |
| Canada | |
| 418-688-0170 | |
| Visit this company's website |
Facility : Zaragoza, Spain
Joining and Sealing Materials
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Gasket/Sealing Materials [G] |
||||
| EPDM Gasket C type (0.75" - 24") | [1] | C. HOT | EPDM | |
| EPDM Gasket FF type (0.75" - 24") | [1] | C. HOT | EPDM | |
| Gasket Flange Adapter Plain EPDM (2" - 3") | [1] | C. HOT | EPDM | |
| Plain Gaskets (1" - 3") | [1] | C. HOT | EPDM | |
[1] Certified for a maximum surface area to volume ratio of 19.1 square inches/L.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||
|
O-Rings [G] |
||||
| Main Body Gasket (O-ring) DN250 - DN700 | [1] | C. HOT | EPDM | |
| O-ring 1" - 1.5" | [1] | C. HOT | EPDM | |
[1] Certified for a maximum surface area to volume ratio of 19.1 square inches/L.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Facility : Zaragoza, Spain
Mechanical Devices
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Filtration Devices / Components |
||||
| Piperlink Permeate Connector / PLE[1] | [2] | C. HOT | MLTPL | |
| Piperlink flexible hose connector / PLH [1] | [2] | C. HOT | MLTPL | |
| Piperlink flexible hose connector / PLS [1] | [2] | C. HOT | MLTPL | |
[1] Certified for use with high flow devices in public water treatment facilities.
[2] Piperlink permeate connector / PLE, Piperlink flexible hose connector / PLH and
Piperlink rigid connector / PLS
are certified for a maximum surface area to volume ratio of 700 sq. in./L in reverse
osmosis or ultrafiltration filter elements
with a minimum daily flow of 16,800 liters per day.
|
||||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Facility : Sousse, Tunisia
Mechanical Devices
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Miscellaneous Process Devices/Components[1] |
||||
| B-Q-Style | [2] | D. HOT | MLTPL | |
| B-X-Style | [3] | D. HOT | MLTPL | |
| HH-Q-Style | [4] | D. HOT | MLTPL | |
| HH-X-Style | [5] | D. HOT | MLTPL | |
| HV-Q-Style | [4] | D. HOT | MLTPL | |
| HV-X-Style | [5] | D. HOT | MLTPL | |
| MF-H-Style | [6] | D. HOT | MLTPL | |
| MF-V-Style | [6] | D. HOT | MLTPL | |
| Q-Style | [7] | D. HOT | MLTPL | |
| QH-Style | [7] | D. HOT | MLTPL | |
| S-Q-Style | [7] | D. HOT | MLTPL | |
| S-X-Style | [7] | D. HOT | MLTPL | |
| XB-Style | [8] | D. HOT | MLTPL | |
| XS-Style | [9] | D. HOT | MLTPL | |
| XSH-Style | [9] | D. HOT | MLTPL | |
[1] Since these models do not contain the filter cartridges no flushing is required.
Q-Style - Vertical Cartridge filter with quick opening system
QH-Style - Horizontal Cartridge filter with quick opening system
XS-Style - Vertical Cartridge filter with side inlet
XSH-Style - Horizontal Cartridge filter with side inlet
XB-Style - Vertical Cartridge filter with bottom inlet
HV-Q-Style - High flow Vertical Cartridge filter with quick opening system
HV-X-Style - High flow Vertical Cartridge filter with side inlet
HH-Q-Style - High flow Horizontal Cartridge filter with quick opening system
HH-X-Style - High flow Horizontal Cartridge filter with side inlet
B-Q-Style - Bag filter with quick opening system
B-X-Style - Traditional Bag filter
S-Q-Style - Strainer with quick opening system
S-X-Style - Traditional Strainer
MF-V-Style - Vertical Media Filter
MF-H-Style - Horizontal Media Filter
[2] B-Q Style models are certified for a minimum daily flow of 504,000 liters per day.
[3] B-X Style models are certified for a minimum daily flow of 6,720,000 liters per day.
[4] HH-Q Style and HV-Q-Style models are certified for a minimum daily flow of 960,000
liters per day.
[5] HV-X Style and HH-X Style models are certified for a minimum daily flow of 10,080,000
liters per day.
[6] MF-V-Style and MF-H-Style are certified for a minimum daily flow of 144,000 liters per
day.
[7] Q-Style, QH-Style S-Q Style and S-X Style models are certified for a minimum daily flow
of 144,000 liters per day.
[8] XB Style models are certified for a minimum daily flow of 6,600,000 liters per day.
[9] XS Style and XSH-Style models are certified for a minimum daily flow of 5,880,000 liters
per day.
|
||||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Number of matching Manufacturers is 1
Number of matching Products is 24
Processing time was 0 seconds

