NSF Product and Service Listings
These NSF Official Listings are current as of Monday, July 22, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=C0436335&Standard=061&
NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects
Drinking Water System Components - Health Effects
NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.
Sika Corporation | |
201 Polito Avenue | |
Lyndhurst, NJ 07071 | |
United States | |
201-933-8800 | |
Visit this company's website |
Facility : Lyndhurst, NJ
Joining and Sealing Materials
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Adhesives |
||||
Sikaflex 201US Aluminum Gray[1] | [2] | CLD 23 | PUR | |
Sikaflex 201US Black[1] | [2] | CLD 23 | PUR | |
Sikaflex 201US Capitol Tan[1] | [2] | CLD 23 | PUR | |
Sikaflex 201US White[1] | [2] | CLD 23 | PUR | |
Sikaflex 221 Aluminum Gray[3] | [2] | CLD 23 | PUR | |
Sikaflex 221 Black[3] | [2] | CLD 23 | PUR | |
Sikaflex 221 White[3] | [2] | CLD 23 | PUR | |
[1] Product requires cure of 7 days at 23°C and 50% relative humidity. [2] Certified for a maximum use level of 0.2 square inches per liter. [3] Product requires cure of 7 days at 23°C. |
||||
Sealants |
||||
Sikaflex 201US Aluminum Gray[1] | [2] | CLD 23 | PUR | |
Sikaflex 201US Black[1] | [2] | CLD 23 | PUR | |
Sikaflex 201US Capitol Tan[1] | [2] | CLD 23 | PUR | |
Sikaflex 201US White[1] | [2] | CLD 23 | PUR | |
Sikaflex 221 Aluminum Gray[3] | [2] | CLD 23 | PUR | |
Sikaflex 221 Black[3] | [2] | CLD 23 | PUR | |
Sikaflex 221 White[3] | [2] | CLD 23 | PUR | |
[1] Product requires cure of 7 days at 23°C and 50% relative humidity. [2] Certified for a maximum use level of 0.2 square inches per liter. [3] Product requires cure of 7 days at 23°C. |
Facility : Sao Paulo, Brazil
Joining and Sealing Materials
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Sealants |
||||
Sikaflex-501[2] [3] | [1] | CLD 23 | SLT | |
[1] Certified for a maximum use level of 0.2 square inches per liter. [2] Certified colors are white, grey, and black. [3] Product requires cure of 7 days at 23°C and 50% relative humidity. |
Number of matching Manufacturers is 1
Number of matching Products is 15
Processing time was 0 seconds