NSF Product and Service Listings
These NSF Official Listings are current as of Tuesday, October 1, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=C0539067&Standard=061&
NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects
Drinking Water System Components - Health Effects
NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.
Paramount Supply Company | |
3469 East University Drive | |
Phoenix, AZ 85034 | |
United States | |
602-258-5599 | |
Visit this company's website |
Facility : Phoenix, AZ
Joining and Sealing Materials
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Gasket/Sealing Materials |
||||
1082 SAN | [1] | CLD 23 | NBR | |
3505 Blue Glyon[G] | [2] | CLD 23 | PTFE | |
3760-U Multi-Swell[G] | [3] | CLD 23 | OTHER | |
AB-576[G] | [4] [5] | C. HOT | EPDM | |
TF 1572 SAN | [5] | C. HOT | OTHER | |
[1] Certified for a maximum surface area to volume ratio of 1.1 sq. in./L. [2] Certified for a maximum width of 1/2” when used with pipes 1” – 144” in diameter. [3] Certified for a maximum width of 1/8” when used with pipes 1” – 144” in diameter. [4] This product has also been evaluated for use in Mechanical Plumbing Device applications with a maximum use restriction of 0.2 sq. in./L. [5] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||
O-Rings |
||||
3505 Blue Glyon[G] | [2] | CLD 23 | PTFE | |
AB-576[G] | [4] [5] | C. HOT | EPDM | |
TF 1572 SAN | [5] | C. HOT | PTFE | |
[2] Certified for a maximum width of 1/2” when used with pipes 1” – 144” in diameter. [4] This product has also been evaluated for use in Mechanical Plumbing Device applications with a maximum use restriction of 0.2 sq. in./L. [5] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Mechanical Devices
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Potable Water Materials [G] |
||||
98206 | [1] | C. HOT | EPDM | |
[1] Certified for use in distribution system valves as a material to encapsulate the disc. The surface area to volume ratio may not exceed 50 sq. in./L. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Number of matching Manufacturers is 1
Number of matching Products is 9
Processing time was 0 seconds