NSF Product and Service Listings

These NSF Official Listings are current as of Monday, July 22, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=C0539097&Standard=061&


NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.

 
A.W. Cook Cement Products, Inc. 
242 Amy Industrial Lane
Hoschton, GA 30548 
United States 
706-654-3677


Facility : Hoschton, GA

Protective (Barrier) Materials

    Water Water
  Water Contact Contact Contact
Trade Designation Size Restriction Temp Material

Coatings - Fittings[1]
Cemtec Silatec PW >= 6" CLD 23 CMNT 

[1] Coating Notes:
    Color: Gray
    Number of Coats: 2 - 4
    Maximum Field Use Dry Thickness (in mils): 2000 mils
    Recoat Cure Time and Temperature: 1 hour at 75°F
    Final Cure Time/Temperature: 7 days @ 75°F
    Special Comments: Mix ratio is 4 quarts of water to one 60 lb bag of Cemtec Silatec PW. 
    Ensure proper surface preparation guidelines are followed prior to installation.

Coatings - Pipe[1]
Cemtec Silatec PW >= 48" CLD 23 CMNT 

[1] Coating Notes:
    Color: Gray
    Number of Coats: 2 - 4
    Maximum Field Use Dry Thickness (in mils): 2000 mils
    Recoat Cure Time and Temperature: 1 hour at 75°F
    Final Cure Time/Temperature: 7 days @ 75°F
    Special Comments: Mix ratio is 4 quarts of water to one 60 lb bag of Cemtec Silatec PW. 
    Ensure proper surface preparation guidelines are followed prior to installation.

Coatings - Tank[1]
Cemtec Silatec PW >= 10,000 gal. CLD 23 CMNT 

[1] Coating Notes:
    Color: Gray
    Number of Coats: 2 - 4
    Maximum Field Use Dry Thickness (in mils): 2000 mils
    Recoat Cure Time and Temperature: 1 hour at 75°F
    Final Cure Time/Temperature: 7 days @ 75°F
    Special Comments: Mix ratio is 4 quarts of water to one 60 lb bag of Cemtec Silatec PW. 
    Ensure proper surface preparation guidelines are followed prior to installation.

Number of matching Manufacturers is 1
Number of matching Products is 3
Processing time was 0 seconds