NSF Product and Service Listings
These NSF Official Listings are current as of Monday, July 22, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=C0560107&Standard=061&
NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects
Drinking Water System Components - Health Effects
NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.
Function International Public Company Limited | |
313 Charoen Phatthana Rd. | |
Bang Chan, Khlong Sam Wa | |
Bangkok 10510 | |
Thailand | |
662 5406263 | |
Visit this company's website |
Facility : Guizhou, China
Mechanical Devices
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Reverse Osmosis Element[1] [2] [3] [4] |
||||
ULTRATEK BW-2521 | 2 1/2" x 21" | CLD 23 | MLTPL | |
ULTRATEK BW-4021 | 4" x 21" | CLD 23 | MLTPL | |
ULTRATEK BW-4040 | 4" x 40" | CLD 23 | MLTPL | |
ULTRATEK BW-4040E | 4" x 40" | CLD 23 | MLTPL | |
ULTRATEK BW-4040L | 4" x 40" | CLD 23 | MLTPL | |
ULTRATEK BW-8040 | 8" x 40" | CLD 23 | MLTPL | |
ULTRATEK SW-2540 | 2 1/2" x 40" | CLD 23 | MLTPL | |
ULTRATEK SW-4021 | 4" x 21" | CLD 23 | MLTPL | |
ULTRATEK SW-4040 | 4" x 40" | CLD 23 | MLTPL | |
[1] Certified for both wet and dry elements. [2] All elements (wet and dry) require a pre-service flush: Fill the RO pressure vessel with qualified pretreated water. The feed water pressure shall be restricted to 50 psi and the flow rate shall be equal to 16 GPM (gallons per minute). The rejected water and product water shall be discharged completely. The membrane element shall be flushed for 6 hours. No antiscalant shall be added in flushing." [3] ULTRATEK BW-4021, ULTRATEK BW-2521, ULTRATEK SW-2540, ULTRATEK SW-4021 elements are evaluated for point-of-entry end uses. [4] Certified for minimum flow rate of: ULTRATEK BW-8040: 30,000 L/day ULTRATEK BW-4040E,ULTRATEK BW-4040,ULTRATEK SW-4040, ULTRATEK BW-4040L : 8,000 L/day |
Number of matching Manufacturers is 1
Number of matching Products is 9
Processing time was 0 seconds