NSF Product and Service Listings
These NSF Official Listings are current as of Tuesday, October 1, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=C0703483&Standard=061&
NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects
Drinking Water System Components - Health Effects
NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.
Filtersafe | |
Ha’Ella Street, POB 23 | |
Tefen Industrial Park | |
Tefen 2495900 | |
Israel | |
972 4 6046000 |
Facility : Tefen, Israel
Mechanical Devices
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Filtration Devices/Components[1] |
||||
TTN 100 | 40.6 x 286.7 cm | CLD 23 | MLTPL | |
TTN 200 | 61 x 323.9 cm | CLD 23 | MLTPL | |
TTN 400 | 103.2 x 380 cm | CLD 23 | MLTPL | |
TTN 500 | 103.2 x 430 cm | CLD 23 | MLTPL | |
[1] TTN 100 is certified for a minimum daily permeate flow of 720,000 liters per day. TTN 200 is certified for a minimum daily permeate flow of 960,000 liters per day. TTN 400 is certified for a minimum daily permeate flow of 1,200,000 liters per day. TTN 500 is certified for a minimum daily permeate flow of 1,920,000 liters per day. TTN 100 requires a 2 hour flush at a flow rate of 25 liters per minute (lpm) with tap water. TTN 200 requires a 2 hour flush at a flow rate of 60 liters per minute (lpm) with tap water. TTN 400 requires a 2 hour flush at a flow rate of 200 liters per minute (lpm) with tap water. TTN 500 requires a 2 hour flush at a flow rate of 250 liters per minute (lpm) with tap water. |
Number of matching Manufacturers is 1
Number of matching Products is 4
Processing time was 0 seconds