NSF Product and Service Listings

These NSF Official Listings are current as of Monday, July 22, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=C0768510&Standard=061&


NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.

 
Ningbo RXHL Technology Co., Ltd. 
No. 296, Kaiyuan Road
High-tech Zone 
Cixi 
Ningbo, 33 315312 
China 
86 574 63208887
Visit this company's website


Facility : Zhejiang, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Reverse Osmosis Element[1] [2]
BW-4040 4 x 40 in CLD 23 MLTPL
BW-4040-FR 4 x 40 in CLD 23 MLTPL
BW-4040-HR 4 x 40 in CLD 23 MLTPL
BW-8040 8 x 40 in CLD 23 MLTPL
BW-8040-FR 8 x 40 in CLD 23 MLTPL
BW-8040-HR 8 x 40 in CLD 23 MLTPL
TW-4040 4 x 40 in CLD 23 MLTPL
TW-8040 8 x 40 in CLD 23 MLTPL
ULP-4040 4 x 40 in CLD 23 MLTPL
ULP-4040-FR 4 x 40 in CLD 23 MLTPL
ULP-4040-HR 4 x 40 in CLD 23 MLTPL
ULP-8040 8 x 40 in CLD 23 MLTPL
ULP-8040-FR 8 x 40 in CLD 23 MLTPL
ULP-8040-HR 8 x 40 in CLD 23 MLTPL 

[1] ULP = Ultra Low Pressure
    BW = Brackish Water
    TW = Tap Water
    HR = High Resistant
    FR = Fouling Resistant
[2] Products require the following pre-service flush using tap water at a pressure not to
    exceed 50 psi:						
    ULP-4040 requires a pre-service flush at a flow rate of 4 GPM (gallons per minute) for
    24 hours.
    ULP-8040 requires a pre-service flush at a flow rate of 12 GPM (gallons per minute) for
    24 hours.
    ULP-4040-HR requires a pre-service flush at a flow rate of 4 GPM (gallons per minute)
    for 24 hours.
    ULP-8040-HR requires a pre-service flush at a flow rate of 12 GPM (gallons per minute)
    for 24 hours.
    ULP-4040-FR requires a pre-service flush at a flow rate of 4 GPM (gallons per minute)
    for 24 hours.
    ULP-8040-FR requires a pre-service flush at a flow rate of 12 GPM (gallons per minute)
    for 24 hours.
    BW-4040 requires a pre-service flush at a flow rate of 4 GPM (gallons per minute) for 24
    hours.
    BW-8040 requires a pre-service flush at a flow rate of 12 GPM (gallons per minute) for
    24 hours.
    BW-4040-HR requires a pre-service flush at a flow rate of 4 GPM (gallons per minute) for
    24 hours.
    BW-8040-HR requires a pre-service flush at a flow rate of 12 GPM (gallons per minute)
    for 24 hours.
    BW-4040-FR requires a pre-service flush at a flow rate of 4 GPM (gallons per minute) for
    24 hours.
    BW-8040-FR requires a pre-service flush at a flow rate of 12 GPM (gallons per minute)
    for 24 hours.
    TW-4040 requires a pre-service flush at a flow rate of 4 GPM (gallons per minute) for 24
    hours.
    TW-8040 requires a pre-service flush at a flow rate of 12 GPM (gallons per minute) for
    24 hours.

Number of matching Manufacturers is 1
Number of matching Products is 14
Processing time was 0 seconds