NSF Product and Service Listings
These NSF Official Listings are current as of Monday, July 22, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=C0777113&Standard=061&
NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects
Drinking Water System Components - Health Effects
NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.
4 Sealing Italia SRL | |
Vicolo Stretto 2 | |
25030 Rudiano, Brescia | |
Italy | |
39 391 348 5439 | |
Visit this company's website |
Facility : 4 Sealing - Brescia
Joining and Sealing Materials
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Gasket/Sealing Materials |
||||
EXX50 | [1] | C. HOT | EPDM | |
EXX60 | [1] | C. HOT | EPDM | |
EXX70 | [1] | C. HOT | EPDM | |
EXX90 | [1] | C. HOT | EPDM | |
NXX50[2] | [1] | C. HOT | NBR | |
NXX60[2] | [1] | C. HOT | NBR | |
NXX70[2] | [1] | C. HOT | NBR | |
NXX90[2] | [1] | C. HOT | NBR | |
[1] Certified for a maximum surface area to volume ratio of 2.0 square inches/L. [2] This product has also been evaluated for use in Mechanical Plumbing Device applications with a maximum use restriction of 0.8 square inches/L. |
||||
O-Rings |
||||
EXX50 | [1] | C. HOT | EPDM | |
EXX60 | [1] | C. HOT | EPDM | |
EXX70 | [1] | C. HOT | EPDM | |
EXX90 | [1] | C. HOT | EPDM | |
NXX50[2] | [1] | C. HOT | NBR | |
NXX60[2] | [1] | C. HOT | NBR | |
NXX70[2] | [1] | C. HOT | NBR | |
NXX90[2] | [1] | C. HOT | NBR | |
[1] Certified for a maximum surface area to volume ratio of 2.0 square inches/L. [2] This product has also been evaluated for use in Mechanical Plumbing Device applications with a maximum use restriction of 0.8 square inches/L. |
Number of matching Manufacturers is 1
Number of matching Products is 16
Processing time was 0 seconds