NSF Product and Service Listings

[1] Certified for hose assemblies in the following configurations: Stainless Steel CXC, CXE.
[2] Certified for hose assemblies in the following configurations: Stainless Steel CXC, CXE,
    Tri-clamp. All configurations of these hose assemblies are certified for a minimum
    length of 24 inches.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[3] This product has been evaluated for use in Piping (Section 4) applications with the
    following length restrictions:
    Diameter    Maximum Length
    1/8"        No Restriction
    3/16"       No Restriction
    1/4"        No Restriction
    5/16"       No Restriction
    3/8"        270"
    7/16"       230"
    1/2"        200"
    9/16"       180"
    5/8"        160"
    11/16"      145"
    3/4"        135"
    13/16"      No Restriction
    7/8"        No Restriction
    15/16"      No Restriction
    1"          No Restriction
    1 1/8"      No Restriction
    1 3/16"     No Restriction
    1 1/4"      No Restriction
    1 5/16"     No Restriction
    1 3/8"      No Restriction
    1 7/16"     No Restriction
    1 1/2"      No Restriction
    1 9/16"     No Restriction
    1 5/8"      No Restriction
    1 11/16"    No Restriction
    1 3/4"      No Restriction
    2"          No Restriction

[1] Certified for pipes and fittings 4" and greater, tanks 200 gallons and greater.
[2] Certified for a level not to exceed 50% of cement by mass.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Use of this material may not be appropriate in all water chemistries. Copper [tube,
    pipe, or fitting] may require corrosion control to limit the leaching of copper into
    drinking water under certain water chemistries. Refer to Section I-1.1 of NSF/ANSI/CAN
    61 for the water quality considerations to be used before installing this product.
[2] This product has not been evaluated for use in water main transmission piping but has
    been evaluated for use as water distribution piping in buildings.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Listed Storage Tanks/Reservoirs include galvanized polyethylene, polypropylene, or
    polyphenylene oxide appurtenances; polyurethane (or alternate rubber) sealer, fastener
    coverings; gaskets; and magnesium or zinc anodes. Interiors and floors can be composed
    of: Vitreous coated interior with vitreous coated floor or concrete floor coated with
    NSF Certified coating, or epoxy coated interior with epoxy coated floor or concrete
    floor coated with NSF Certified coating, or stainless steel interior with stainless
    steel floor or concrete floor coated with NSF Certified coating. All NSF Certified
    coatings must be Listed for tanks at least 17,650 gallons, and application must occur
    according to Certified specifications.
[2] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Gasket/seal for installation is not included in the certification.
[2] HYDRUS 2.0 US 1 1/2 has a flange connection.
[3] HYDRUS 2.0 US 2 has a flange connection.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

* All Listed products from this facility are NSF Certified, whether or not they bear the
  NSF Mark.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for a minimum flow of 15,663 gallons per day.
[2] Certification is for health effects only and does not address the disinfection efficacy
    of the product.
[3] The finished drinking water shall be monitored per manufacturer's instructions and the
    units controlled to ensure that levels of copper do not exceed 0.8 mg/L, and the levels
    of silver do not exceed 0.08 mg/L.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] X67(1)(2)(3)
    (1) Shore A Durometer, any number between 55 and 95
    (2) Three character color name, either TRN (transparent), WHT (white), BLK (black), or
    NAT (natural)
    (3) Alpha-Numeric, four characters 000A through 999Z
    

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[2] Aurora Pump sizes (outlet size x inlet size x case bore/impeller size) / Fairbanks
    Nijhuis sizes
    1.25" x 1.5" x 7" / 1 1/4" -1621 & -1651
    1.25" x 1.5" x 9.5" / 1 1/4" - 1622 & -1652
    1.5" x 2" x 7" / 1 1/2" -1621 & -1651
    1.5" x 2" x 9.5" / 1 1/2" - 1624 & -1654
    1.5" x 2" x 11" / 1 1/2 " -1622 & -1652
    1.5" x 2" x 12" / 1 1/2" -1623 & -1653
    2" x 2.5" x 7" A / 2" -1621A  & -1651A
    2" x 2.5" x 9.5" / 2" -1622 & -1652
    2" x 3" x 11" / 2" -1623 & -1653
    2" x 3" x 13.5" / 2" -1624 & -1654
    2.5" x 3" x 7" / 2 1/2" -1621 & -1651
    2.5" x 3" x 9.5" / 2 1/2" -1622 & -1652
    2.5" x 3" x 13.5" / 2 1/2" -1623 & -1653
    3" x 4" x 7"A / 3"-1621A & 1651A
    3" x 4" x 9.5" / 3" -1622 & -1652
    3" x 4" x 11" / 3" -1623 & -1653
    3" x 4" x 13.5" / 3" -1624 & -1654
    4" x 5" x 7" A / 4" -1621A & -1651A
    4" x 5" x 9.5" / 4" -1622 & -1652
    4" x 5" x 11" A/ 4" -1623A & -1653A
    4" x 5" x 13.5" / 4" -1624 & -1654
    5" x 6" x 7"A / 5"-1621A & 1651A
    5" x 6" x 9.5" A/ 5" -1622A & -1652A
    5" x 6" x 11" / 5" -1623 & -1653
    5" x 6" x 13.5" / 5" -1624 & -1654
    6" x 8" x 9.5" / 6" -1621 & -1651
    6" x 8" x 11" A/ 6" -1622A & -1652A
    6" x 8" x 13.5" / 6" -1623 & -1653
    8" x 10" x 13.5" / 8" -1622 & -1652
[3] [N] is the brand designator and may be Berkeley, Pentair, Fairbanks-Nijhuis or Aurora. 
    BVM or PVM is the trade name – The I designator is for the 304 stainless steel and may
    only be used up to flow series 33.  The X designator is for 316 stainless steel and may
    be used with any flow series. 
    [B] is the flow series and may be 64, 90, 120, 150
    [C] is the number of impellers. 
    [D] is the number of smaller-diameter impellers for flow series 90, if present.
[4] Each flow series has the following inlet/outlet size:
    Flow Series 64, 90 – 4”
    Flow Series 120, 150 – 5”
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Please refer to the Polynt Composites USA Inc. Product Bulletin for system requirements.
[2] Colors: N/A
    Number Of Coats: 1
    Maximum Field Use Dry Thickness(in mils): 10
    Maximum Thinner: N/A
    Recoat Cure Time and Temperature: 2-100 hours at ambient temperature
    Final Cure Time/Temperature: 4 hours at 160° F followed by 2 hours at 180° F
[3] Certified for use as the resin in pipes 6" and greater or in tanks 150 gallons and
    greater. It may also be applied as a coating system alone.

[1] Certified for a maximum surface area to volume ratio of 80 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 65 sq. in./L.

[1] Product Certification does not include use of a primer.
[2] Certified for a maximum of 54 1/2" joints per residence (5 joints per Liter).
[3] Product is Certified using the following cure parameters:
    1. I-TPS is to be applied to the male threads only in order to avoid product to protrude
    in back of the assembly.
    2. I-TPS should be allowed to cure at 70 - 80 F for at least 24 hr.
    3. I-TPS not between the threads and exposed to air will not cure. The excess I-TPS must
    be washed or removed after application.

[1] Number of Coats:  1
    Maximum Field Use Dry Film Thickness (in mils):  20-30
    Final Cure Time and Temperature: 24 hours at 75°F

[1] Certified for a maximum exposed surface area of 216 sq. in./1000 gal.

[1] Certified for a maximum exposed surface area of 216 sq. in./1000 gal.
[2] Certified for a maximum surface area of 568 square inches per 1000 gallons.  Mix ratio
    2:1 (Resin:Cure).

[1] This product may be used at a maximum use level of 80% as a replacement for Portland
    Cement.
[2] Certified for pipes 8" and greater, tanks 1000 gallons and greater.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Mix ratio is 2.4-3.3 L of water per 50 lb mortar.
[2] Certified for a 7 day moist cure at 73 +/- 3 degrees and 100% relative humidity followed
    by a 1-3 day air cure at 73 +/- 3 degrees and 50% relative humidity.
[3] Certification does not include Duralprep AC primer or Eucobar evaporation retarder.
[4] Certified for use at a maximum of 50% of tanks 20,000 gallons and greater, 50% of pipes
    60" diameter and greater, and 50% of fittings 4" diameter and greater.

[1] Number Of Coats: 2
    Maximium Field Use Dry Thickness(in mils): 125 mils
    Recoat Cure Time and Temperature: 12 hours at 40°F
    Final Cure Time/Temperature: 7 days at 40°F
    Colors: Gray, White
    Special Comments: Akkro-7T or Flex-Con Additives are mixed 1:3 (Additive:water) as the
    mixing liquid and then used at 2 gal per 50 lb
    Tamoseal. Induction time is 10 minutes.

[1] Number Of Coats: 2
    Maximium Field Use Dry Thickness(in mils): 125 mils
    Recoat Cure Time and Temperature: 12 hours at 40°F
    Final Cure Time/Temperature: 7 days at 40°F
    Colors: Gray, White
    Special Comments: Akkro-7T or Flex-Con Additives are mixed 1:3 (Additive:water) as the
    mixing liquid and then used at 2 gal per 50 lb
    Tamoseal. Induction time is 10 minutes.

[1] Number Of Coats: 2
    Maximium Field Use Dry Thickness(in mils): 125 mils
    Recoat Cure Time and Temperature: 12 hours at 40°F
    Final Cure Time/Temperature: 7 days at 40°F
    Colors: Gray, White
    Special Comments: Akkro-7T or Flex-Con Additives are mixed 1:3 (Additive:water) as the
    mixing liquid and then used at 2 gal per 50 lb
    Tamoseal. Induction time is 10 minutes.
[2] Colors: Gray, white
    Number of Coats: 2
    Sequence of Coats: N/A
    Maximum Field Use Dry Film Thickness (in mils): 60
    Maximum Thinner: None
    Recoat Cure Time and Temperature: 24 hours at 75°F
    Final Cure Time and Temperature: 7 days at 75°F
    Special Comments: Apply to concrete at a rate of 0.25 lb. mixed slurry per square foot.
    Mix 1:5 Hey'Di SB Bonding with water then mix that at 50 lb. Hey'Di K-11 to 2 gallons of
    mixed SB Bonding.
    

[1] Certification includes lubricant, form oil, joint rings, and patch compound. Gaskets
    used with this system must be NSF Certified for the applicable diameter pipe size.

[1] Certification includes lubricant, form oil, joint rings, and patch compound. Gaskets
    used with this system must be NSF Certified for the applicable diameter pipe size.

[1] Model Naming Convention:
    UC01-XX.YY.ZZ.SS
    UC01 - Split Case Pump Series
    XX - Discharge Size (inches)
    YY - Suction Size (inches)
    ZZ - Impeller Maximum Trim (inches)
    SS - Spheres (solids) passage size (inches)
    Certified for use in municipal distribution systems only.
    Certified for a minimum daily flow of 140 gallons.

[1] Number of Coats: 2
    Maximum Field Use Dry Film Thickness (in mils): 30  (15 per coat)
    Recoat Cure Time and Temperature: 12 hours/50°F
    Final Cure Time and Temperature: 12 hours/50°F
    Special Comments: Add 2 pints of cold water for each 10 pounds of DRYLOK Powdered
    Masonry Waterproofer. Stir until mixture is free of lumps. Thin with an additional 2
    pints of water for normal application or 11/2 pints of water for heavy application. Stir
    until smooth. Wait for 15 minutes, restir and apply.
[2] Certification does not include DRYLOK® Fast Plug or DRYLOK® Latex Bonding Agent.

[1] Certified for a minimum flow rate of 1,440 gallons/day/square foot.

[1] Certified sizes are as follows:
    Concrete Insert - Multiple
    Pan Form - 541 sq. in./sq. ft.
    Underdrain Nozzle - 3014 sq. in./sq. ft.

[1] Certified sizes are as follows:
    Concrete Insert - Multiple
    Pan Form - 541 sq. in./sq. ft.
    Underdrain Nozzle - 3014 sq. in./sq. ft.