NSF Product and Service Listings

These NSF Official Listings are current as of Monday, December 22, 2014 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?



NSF/ANSI 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings.


 
A Touch of Brass 
13832 Magnolia Avenue
Chino, CA 91710 
United States 
909-464-1000
Visit this company's website

Facility : Chino, CA

Mechanical Plumbing Devices

Trade Designation      

Commercial Faucets[1] [G]
01280      
01281      
01282      
01283      

[1] Suffix - xx indicates finish.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Faucets[1] [G]
02017      
02121      
02122      
02123      
02125      
02356      
02524      
02863      
02867      
02877      
02960      
05253      

[1] Suffix - xx indicates finish.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Faucet Hose and Spray Assembly[1] [G]
02124      
02801      
02854      

[1] Suffix - xx indicates finish.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
A-S America Inc. (American Standard Brands) 
1 Centennial Avenue
Piscataway, NJ 08854 
United States 
732-369-4061

Facility : # 1 Italy

Mechanical Plumbing Devices

Trade Designation      

Single Lever Basin Mixer[G]
D35109.100.100      
D35109.100.144      
D35109.150.100      
D35109.150.144      

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Single Lever Sink Mixer[G]
D35409.000.100      
D35409.000.355      

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Single Lever Sink Mixer with Pull-Out Shower[G]
D35409.300.100      
D35409.300.355      

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Wall Mounted Basin Mixer[G]
D35109.400.100      
D35109.400.144      

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
A. O. Smith Enterprises Ltd. 
768 Erie Street
P.O. Box 310 
Stratford, ON N5A 6T3 
Canada 
519-271-5800

Facility : Stratford, Ontario, Canada

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Pressurized Water Storage Tanks[1] [G]
A O Smith ProMax (PM Prefix) 14 - 119 gal. CLD 23 MLTPL
American Water Heater (APT Prefix) 14 - 119 gal. CLD 23 MLTPL
Driller Services (DST/DSI Prefix) >= 65 gal. CLD 23 MLTPL
Global Pump (GPE Prefix) >= 85 gal. CLD 23 MLTPL
Gould Pumps Hydro Pro Water Systems Tanks (V Prefix and MP or PST Suffix) 14 - 20 gal. CLD 23 MLTPL
Gould Pumps Hydro Pro Water Systems Tanks (V Prefix) 14 - 119 gal. CLD 23 MLTPL
PermaTank (SBD/SBDT Prefix) >= 86 gal. CLD 23 MLTPL
Pump Pro (PP Prefix and MP or PST Suffix) 14 - 20 gal. CLD 23 MLTPL
Pump Pro (PP Prefix) >= 14 gal. CLD 23 MLTPL
Trident (TD Prefix and MP or PST Suffix) 14 - 20 gal. CLD 23 MLTPL
Trident Ultra (TDU Prefix and MP or PST Suffix ) >= 14 gal. CLD 23 MLTPL
Trident Ultra (TDU and TD Prefix) >= 14 gal. CLD 23 MLTPL
VDE Altamira Pro X/XL 20 - 119 gal. CLD 23 MLTPL
Xylem CentriPro T Water Sytem Tanks 14 - 119 gal. CLD 23 MLTPL
Xylem CentriPro TP Water Systems Tanks 14 - 119 gal. CLD 23 MLTPL
Xylem Hydro Pro Water System Tanks (V Prefix) 14 - 119 gal. CLD 23 MLTPL
Xylem Hydro Pro Water System Tanks (V prefix and MP or PST suffix) 14 - 20 gal. CLD 23 MLTPL

[1] Product also complies with NSF/ANSI 372.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Thermal Expansion Tanks[1] [G]
Bell and Gossett (Prefix PT)[2] 14 - 86 gal. D. HOT MLTPL

[1] Product also complies with NSF/ANSI 372.
[2] Suffixes:
    blank 
    B   - Buried 
    EX  - Base extension 
    MP  - Mounted pump 
    P   - Pipe mounted 
    PST - Pump system tank
    S
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
A. W. Chesterton Co. 
500 Unicorn Park Drive
Woburn, MA 01888-4004 
United States 
978-469-6766

Facility : Groveland, MA

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Miscellaneous Process Devices/Components
442 Split Mechanical Seal[G] [1] D. HOT MLTPL

[1] Certified for mechanical seals for use with pump shafts ranging from 1" - 12" in
    diameter.  Certified for equivalent metric sizes.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
A.U.K. Müller GmbH & Co. KG 
Dresdener Str. 162
D-40595 Düsseldorf 
Germany 
49 21 173 910
Visit this company's website

Facility : Düsseldorf, Germany

Mechanical Plumbing Devices

Trade Designation      

Valves[G]
50.005.100 Cartridge Valve      
50.005.101 Cartridge valve      
50.007.101      
50.007.806 Solenoid Cartridge Valve[1]      
50.009.101      
T01 50.009.800      
T02 50.009.800      

[1] Certified for models that include: 
    G 1/2 male threads 
    G 3/8 male threaded with G 3/8 female threads 
    G 3/8 male threaded with G 1/2 female threads 
    Model with sockets for customer provided fitting adapters.

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
A.Y. McDonald Mfg. Co. 
4800 Chavenelle Road
Dubuque, IA 52004-0508 
United States 
800-292-2737

Facility : # 3 China

Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings
72101P PEX LF Drop Ear Elbow (PEX x FNPT)[2] [G] 3/8" - 3/4" D. HOT MLTPL
72300 PEX LF Coupling (PEX x PEX)[2] [G] 3/8" - 1 1/4" D. HOT MLTPL
72300F PEX LF Coupling (PEX x FNPT)[2] [G] 1/2" - 1" D. HOT MLTPL
72300M PEX LF Coupling (PEX x MNPT)[2] [G] 3/8" - 1 1/4" D. HOT MLTPL
72300PB PEX LF Coupling (PEX x PB)[2] [G] 1/2" - 3/4" D. HOT MLTPL
72300SF PEX LF Coupling (PEX x F Sweat)[2] [G] 1/2" - 1" D. HOT MLTPL
72300SFM PEX LF Adapter (PEX x Comb M-F Sweat)[2] [G] 1/2" - 1" D. HOT MLTPL
72300SM PEX LF Coupling (PEX x M Sweat)[2] [G] 1/2" - 1 1/4" D. HOT MLTPL
72301 PEX LF Swivel Adapter (PEX x FNPT – Plastic Nut)[2] [G] 1/2" D. HOT MLTPL
72301B PEX LF Swivel Adapter (PEX x FNPT – Brass Nut)[2] [G] 1/2" - 3/4" D. HOT MLTPL
72302 PEX LF Plug (PEX)[2] [G] 3/8" - 1 1/4" D. HOT MLTPL
72330 PEX LF Tee, Reducing Tee (PEX)[2] [G] 1/2" - 1 1/4" D. HOT MLTPL
72390 PEX LF Elbow (PEX)[2] [G] 3/8" - 1 1/4" D. HOT MLTPL
72391 PEX LF Elbow (PEX x MNPT)[2] [G] 1/2" - 3/4" D. HOT MLTPL
72392 PEX LF Swivel Elbow (PEX x NPSM - Plastic Nut)[2] [G] 1/2" D. HOT MLTPL
72392B PEX LF Swivel Elbow (PEX x NPSM - Brass Nut)[2] [G] 1/2" D. HOT MLTPL
72392F PEX LF Elbow (PEX x F Sweat)[2] [G] 1/2" - 3/4" D. HOT MLTPL
72392M PEX LF Elbow (PEX x M Sweat)[2] [G] 1/2" - 3/4" D. HOT MLTPL

[2] Made with LF70.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[1] Tee (2301-XXXXXX) 
    Coupling (2100-XXXX) 
    Tee, reducing (2301-XXXXXX) 
    Elbow (2190-XXXX) 
    Elbow, Push Fit X MNPT, 1/2" x 1/2" only (2190M-0505) 
    Elbow, Push Fit x FNPT, 1/2" x 1/2" (2190F-0505), 3/4" x 3/4" (2190F-0707) 
    Adapter, Push Fit x MPT (2100M-XXXX) 
    Adapter, Push Fit x FPT (2100F-XXXX) 
    Drop Ear Elbow, Push Fit x FPT, 1/2" x 1/2", 3/8" x 1/2" only (2101Q-0505 and
    2101Q-0405) 
    Drop Ear Elbow, Push Fit x Push Fit, 1/2" x 1/2" only (2101QQ-0505) 
    Test Cap (2103-XX) 
    
    Each set of 'XX' may be 04 (3/8"), 05 (1/2"), 07 (3/4") or 08 (1")

Facility : Shanghai, China

Mechanical Plumbing Devices

Trade Designation      

Supply Stops[G]
72080Q 1/2" x 3/8" Supply Stop      
72082Q 1/2" x 1/4" Supply Stop      
72082Q 1/2" x 3/8" Supply Stop      

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings [G]
2100A 1" 1" D. HOT MLTPL
2100A 1" x 3/4" 1" x 3/4" D. HOT MLTPL
2100A 1/2" 1/2" D. HOT MLTPL
2100A 3/4" 3/4" D. HOT MLTPL
2100A 3/4" x 1/2" 1/2" - 3/4" D. HOT MLTPL
2100AF 1/2" 1/2" D. HOT MLTPL
2100AF 3/4" 3/4" D. HOT MLTPL
2100AM 1/2" 1/2" D. HOT MLTPL
2100AM 3/4" 3/4' D. HOT MLTPL
2100C Coupling - QC 1/2" - 1" D. HOT MLTPL
2100CF Adapter - QC x FNPT 1/2" - 1" D. HOT MLTPL
2100CM Adapter - QC x MNPT 1/2" - 1" D. HOT MLTPL
2103A 1" 1" D. HOT MLTPL
2103A 1/2" 1/2" D. HOT MLTPL
2103A 3/4" 3/4" D. HOT MLTPL
2103C End Cap - QC 1/2" - 1" D. HOT MLTPL
2130A 1" 1" D. HOT MLTPL
2130A 1" x 1" x 3/4" 3/4" - 1" D. HOT MLTPL
2130A 1" x 1" x ½" 1/2" - 1" D. HOT MLTPL
2130A 1/2" 1/2" D. HOT MLTPL
2130A 3/4" 3/4" D. HOT MLTPL
2130A 3/4" x 1/2" 1/2" - 3/4" D. HOT MLTPL
2130C Tee - QC 1/2" - 1" D. HOT MLTPL
2190A 1" 1" D. HOT MLTPL
2190A 1/2" 1/2" D. HOT MLTPL
2190A 3/4" 3/4" D. HOT MLTPL
2190C Elbow - QC 1/2" - 1" D. HOT MLTPL
2190CF Elbow - QC x FNPT 1/2" D. HOT MLTPL
2190CM Elbow - QC x MNPT 1/2" D. HOT MLTPL
72100 1" Coupling – QC-NL 1" D. HOT MLTPL
72100 1" x 3/4" Coupling – QC-NL 3/4" - 1" D. HOT MLTPL
72100 1/2" Coupling – QC-NL 1/2" D. HOT MLTPL
72100 3/4" Coupling – QC-NL 3/4" D. HOT MLTPL
72100 3/4" x 1/2" Coupling – QC-NL 1/2" - 3/4" D. HOT MLTPL
72100F 1" Adapter – QC x FIP-NL 1" D. HOT MLTPL
72100F 1/2" Adapter – QC x FIP-NL 1/2" D. HOT MLTPL
72100F 1/2" Adapter – QC x FIP-NL 1/2" D. HOT MLTPL
72100F 1/2" x 3/4" Adapter – QC x FIP-NL 1/2" - 3/4" D. HOT MLTPL
72100F 3/4" Adapter – QC x FIP-NL 3/4" D. HOT MLTPL
72100F 3/4" x 1/2 Adapter – QC x FIP-NL 1/2" - 3/4" D. HOT MLTPL
72100M 1" Adapter – QC x MIP-NL 1" D. HOT MLTPL
72100M 1" x 3/4" Adapter – QC x MIP-NL 3/4" - 1" D. HOT MLTPL
72100M 1/2" Adapter – QC x MIP-NL 1/2" D. HOT MLTPL
72100M 1/2" x 3/4" Adapter – QC x MIP-NL 1/2" - 3/4" D. HOT MLTPL
72100M 3/4" Adapter – QC x MIP-NL 3/4" D. HOT MLTPL
72101P PEX LF Drop Ear Elbow (PEX x FPT)[G] 3/8" - 3/4" D. HOT MLTPL
72101Q 1/2" DRP EAR ELB – QC x FIP-NL 1/2" D. HOT MLTPL
72101QQ 1/2" DRP EAR ELB – QC x QC- NL 1/2" D. HOT MLTPL
72103 1" End Cap – QC- NL 1" D. HOT MLTPL
72103 1/2" End Cap – QC- NL 1/2" D. HOT MLTPL
72103 3/4" End Cap – QC- NL 3/4" D. HOT MLTPL
72130 1" Tee – QC- NL 1" D. HOT MLTPL
72130 1" x 3/4" Tee – QC- NL 3/4" - 1" D. HOT MLTPL
72130 1/2" Tee – QC- NL 1/2" D. HOT MLTPL
72130 3/4" Tee – QC- NL 3/4" D. HOT MLTPL
72130 3/4" x 1/2" Tee – QC- NL 1/2" - 3/4" D. HOT MLTPL
72130 3/4" x 1/2" x 1/2" Tee – QC- NL 1/2" - 3/4" D. HOT MLTPL
72130 3/4" x 1/2" x 3/4" Tee – QC- NL 1/2" - 3/4" D. HOT MLTPL
72190 1" Elbow – QC- NL 1" D. HOT MLTPL
72190 1" x 3/4" Elbow – QC- NL 3/4" - 1" D. HOT MLTPL
72190 1/2" Elbow – QC- NL 1/2" D. HOT MLTPL
72190 3/4" Elbow – QC- NL 3/4" D. HOT MLTPL
72190 3/4" x 1/2" Elbow – QC- NL 1/2" - 3/4" D. HOT MLTPL
72190F 1/2" Elbow – QC x FIP-NL 1/2" D. HOT MLTPL
72190F 3/4" Elbow – QC x FIP-NL 3/4" D. HOT MLTPL
72190M 1/2" Elbow – QC x MIP- NL 1/2" D. HOT MLTPL
72300 PEX LF Coupling (PEX x PEX)[G] 3/8" - 1 1/4" D. HOT MLTPL
72300F PEX LF Coupling (PEX x FNPT)[G] 1/2" - 1" D. HOT MLTPL
72300M PEX LF Coupling (PEX x MNPT)[G] 3/8" - 1 1/4" D. HOT MLTPL
72300PB PEX LF Coupling (PEX x PB)[G] 1/2" - 3/4" D. HOT MLTPL
72300SF PEX LF Coupling (PEX x F Sweat)[G] 1/2" - 1" D. HOT MLTPL
72300SFM PEX LF Adapter (PEX x Comb M-F Sweat)[G] 1/2" - 1" D. HOT MLTPL
72300SM PEX LF Coupling (PEX x M Sweat)[G] 1/2" - 1 1/4" D. HOT MLTPL
72301 PEX LF Swivel Adapter (PEX x NPSM – Plastic Nut)[G] 1/2" D. HOT MLTPL
72301B PEX LF Swivel Adapter (PEX x NPSM – Brass Nut)[G] 1/2" - 3/4" D. HOT MLTPL
72302 PEX LF Plug (PEX)[G] 3/8" - 1 1/4" D. HOT MLTPL
72330 PEX LF Tee, Reducing Tee (PEX)[G] 1/2" - 1 1/4" D. HOT MLTPL
72390 PEX LF Elbow (PEX)[G] 3/8" - 1 1/4" D. HOT MLTPL
72391 PEX LF Elbow (PEX x MNPT)[G] 1/2" - 3/4" D. HOT MLTPL
72392 PEX LF Swivel Elbow (PEX x NPSM – Plastic Nut)[G] 1/2" D. HOT MLTPL
72392B PEX LF Swivel Elbow (PEX x NPSM – Brass Nut)[G] 1/2" D. HOT MLTPL
72392F PEX LF Elbow (PEX x F Sweat)[G] 1/2" - 3/4" D. HOT MLTPL
72392M PEX LF Elbow (PEX x M Sweat)[G] 1/2" - 3/4" D. HOT MLTPL

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
A.Y. McDonald Mfg. Co. 
P.O. Box 508
Dubuque, IA 52004-0508 
United States 
563-583-7311
Visit this company's website

Facility : Zhejiang, China

Mechanical Plumbing Devices

Trade Designation      

Hot Water Dispenser Components[1] [2] [G]

72004QT 1/2 Boiler Drain Quater Turn
     

72004QT 3/4 Boiler Drain Quater Turn
     

72008QT 1/2 Boiler Drain Quater Turn Ball Valve
     

72008QT 3/4 Boiler Drain Quater Turn Ball Valve
     

[1] Product also complies to NSF/ANSI 372.
[2] This product was evaluated with 82°C water based on its end use as a hot water heater
    outlet.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
ABB Ltd. 
Oldends Lane
Stonehouse, Glos 
GL10 3TA 
United Kingdom 
44 14 5382 6661

Facility : Glos, United Kingdom

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Water Meters
FEF[G] >= 2 1/2" CLD 23 MLTPL
FEP[G] 40 mm - 2400 mm CLD 23 MLTPL
FER[G] 40 mm - 600 mm CLD 23 MLTPL
FEV[G] 40 mm - 300 mm CLD 23 MLTPL
FEW[G] 40 mm - 2400 mm CLD 23 MLTPL
WaterMaster V[G] 40 mm - 300 mm CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.


 
ABSMaterials, Inc. 
1909 Old Mansfield Road
Wooster, OH 44691 
United States 
330-234-7999
Visit this company's website

Facility : Wooster, OH

Process Media

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filtration/Adsorption Media [G]
Osorb® - Coated Sand[1] 0.053 mm - 2.00 mm CLD 23 SYN
Osorb® Media 0.074 mm - 2.00 mm CLD 23 SYN

[1] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

NOTE: Certified for water treatment plant applications.
      This product has not been evaluated for point of use applications.


 
Accent Control Systems 
2101 Potshop Lane
Norristown, PA 19403 
United States 
610-630-7640

Facility : Ningbo, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Water Meters[G]
GLF-062/GLF-062-R 5/8" x 1/2" CLD 23 MLTPL
GLF-075/GLF-075-R 5/8" x 3/4" CLD 23 MLTPL
GLF-100/GLF-100-R 3/4" x 1" CLD 23 MLTPL
GLF-100F/GLF-100F-R 1" CLD 23 MLTPL
GLF-150/GLF-150-R 1 1/2" CLD 23 MLTPL
GLF-200(F)/GLF-200-R(F) 2" CLD 23 MLTPL
GLF-200/GLF-200-R 2" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Access-Able Technologies, Inc. 
1275 Bennett Drive #115
Longwood, FL 32750 
United States 
800-572-4894 
407-834-2999

Facility : # 1 USA

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Patching Materials [G]
Pow-R Stick Steel Hard Epoxy Putty (Copper Color) [1] [2] C. HOT EPOXY
Pow-R Stick Steel Hard Epoxy Putty (Grey Color) [1] [2] C. HOT EPOXY
Pow-R Stick Steel Hard Epoxy Putty (White Color) [1] [2] C. HOT EPOXY
STIC-O-STEEL POW-R Putty [1] [2] C. HOT EPOXY

[1] Certified for a maximum surface area to volume ratio of 0.3 sq. in./L in pipe or 1% of a
    20,000 gallon tank.
[2] To obtain the proper mix, use at least a 3/4" length, but no more than 1/3 of a full
    stick, of product which has been cut with a knife. Product must be mixed for 60-90
    seconds.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Accuflex Industrial Hose Ltd. 
760 Imperial Road North
Guelph, ON N1K 1Z3 
Canada 
519-836-5460
Visit this company's website

Facility : Guelph, Ontario, Canada

Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Tubing/Hose [G]
Bev-Flex® 172 1/4" - 1" CLD 23 PE
Bev-Flex® 272 1/4" - 1" CLD 23 PE
Bev-Seal® 176 1/4" - 1" CLD 23 PE
Bev-Seal® 228 1/4" - 1" CLD 23 PE
Bev-Seal® Ultra 175 3/16" - 1" CLD 23 PET
Bev-Seal® Ultra 235 3/16" - 1" CLD 23 PET
Bev-Steel® 178 3/16" - 1" CLD 23 PET
Bevlex® 170 1/4" - 1" CLD 23 PE
Bevlex® 174 1/4" - 1" CLD 23 PE
Bevlex® 222 1/4" - 1" CLD 23 PE
Bevlex® 222YYY[1] 1/4" - 1" CLD 23 PE
Bevlex® 224 1/4" - 1" CLD 23 PE
Bevlex® Plus 180 3/16" - 1" CLD 23 PET
Bevlex® Plus 230 3/16" - 1" CLD 23 PET
Kuri Tec® A3236 1/4" - 1" CLD 23 PE
Kuri Tec® A3246 1/4" - 1" CLD 23 PE

[1] YYY denotes color for the outermost layer. Color codes are:
    BLK  - Black
    BLU  - Blue
    DGRY - Dark Gray
    GRN  - Green
    LGRY - Light Gray 
    RED  - Red
    WHT  - White
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Ace Hardware Corporation 
2200 Kensington Court
Oak Brook, IL 60523-2100 
United States 
630-990-6441

Facility : Zhejiang, China

Mechanical Plumbing Devices

Trade Designation      

Flexible Plumbing Connectors[G]

Reinforced Vinyl Dishwasher Supply Lines[1]
FS-CDC-P-CE      
FS-CDC-P-FE      
FS-CDC-S-CE      
FS-CDC-S-FE      

[1] Hose has I.D. of 0.28 inches and length of 48 - 72 inches. Supply side end is a flow
    check valve.
    FS  - FloodSafe
    CDC - Dishwasher connector
    S   - Stainless steel braid over reinforced vinyl hose
    P   - Reinforced vinyl hose
    Type of connection from supply (maximum inlet size 1/2"):
    C - Compression end fitting
    F - FIP end fitting
    Type of connection to fixture (maximum outlet size 3/8"):
    E - MIP elbow end fitting

Reinforced Vinyl Faucet Supply Lines[2]
FS-CFC-P-CC      
FS-CFC-P-CF      
FS-CFC-P-CO      
FS-CFC-P-FF      
FS-CFC-P-TF      
FS-CFC-S-CC      
FS-CFC-S-CF      
FS-CFC-S-CO      
FS-CFC-S-FF      
FS-CFC-S-TF      

[2] Hose has I.D. of 0.28 inches and length of 6-72 inches.
    FS  - FloodSafe
    CFC - Faucet connector
    CTC - Toilet connector
    P   - Reinforced vinyl hose
    S   - Stainless steel braid over reinforced vinyl hose
    Type of connection from supply (maximum inlet size 1/2"):
    C - Compression end fitting
    F - FIP end fitting
    T - Fine thread FIP end fitting
    Type of connection to fixture (maximum outlet size 7/8"):
    B  - Ballcock end fitting
    C  - Compression end fitting
    E  - MIP elbow end fitting
    F  - FIP end fitting
    O  - OD compression end fitting
    HH - Garden hose connection

Reinforced Vinyl Toilet Supply Lines[2]
FS-CTC-P-CB      
FS-CTC-P-FB      
FS-CTC-P-TB      
FS-CTC-S-CB      
FS-CTC-S-FB      
FS-CTC-S-TB      

[2] Hose has I.D. of 0.28 inches and length of 6-72 inches.
    FS  - FloodSafe
    CFC - Faucet connector
    CTC - Toilet connector
    P   - Reinforced vinyl hose
    S   - Stainless steel braid over reinforced vinyl hose
    Type of connection from supply (maximum inlet size 1/2"):
    C - Compression end fitting
    F - FIP end fitting
    T - Fine thread FIP end fitting
    Type of connection to fixture (maximum outlet size 7/8"):
    B  - Ballcock end fitting
    C  - Compression end fitting
    E  - MIP elbow end fitting
    F  - FIP end fitting
    O  - OD compression end fitting
    HH - Garden hose connection

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Adolf Würth GmbH & Co. KG 
Reinhold-Würth-Strasse 12-17
D-74650 Künzelsau, Baden-Wurttemberg 
Germany 
49 7940150
Visit this company's website

Facility : # 1 Germany

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Sealants[G]
SILICONE ACETATE, FOOD GRADE / ACETATSILIKON LEBENSMITTEL >= 1/2" CLD 23 SLT

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Advanced Component Services 
1420 19th Avenue Northwest
Issaquah, WA 98027 
United States 
425-391-1572

Facility : Chang Hua, Taiwan

Mechanical Plumbing Devices

Trade Designation      

Faucets

Pre-Rinse Assembly Series[G]
MET170-UN      
MET170-UNSG      
MET170-WN      
MET170-WNSG      

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
AJ New Material 
18 Hua Shi East Road
Tong Xiang Long Xiang Industrial Park 
Zhejiang 314500 
China 
86 573 8879 7122

Facility : Zhejiang, China

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Gasket/Sealing Materials [G]
AJG-Gasket [1] D. HOT EPDM
AJG-ORing [1] D. HOT EPDM
AJG-URing [1] D. HOT EPDM
AJG-VRing [1] D. HOT EPDM
AJG-XRing [1] D. HOT EPDM
AJG-YRing [1] D. HOT EPDM

[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
AllPoints Foodservice Parts & Supplies 
607 West Dempster Street
Mt. Prospect, IL 60056 
United States 
800-332-2500 
847-966-9700
Visit this company's website

Facility : Lakewood, NJ

Mechanical Plumbing Devices

Trade Designation      

Commercial Kitchen and Bar Endpoint Devices[1] [G]

56-1540 Pre-Rinse – Deck Mount with wall bracket
     

56-1541 Pre-Rinse – Wall Mount with Wall Bracket
     

[1] Optional exterior coating SANI-GUARD™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Faucets[G]

56-1209 Dipperwell Faucet[1]
     

[1] Optional exterior coating SANI-GUARD™.

56-1231 Economy 8" Deck Mount Faucet w/ 12" Swing Spout
     

56-1232 Economy 4" Deck Mount Faucet w/ 12" Swing Spout
     

56-1539 Faucet, Wok, 10" Spout, 18" Overall Projection[1]
     

[1] Optional exterior coating SANI-GUARD™.

56-1544 Faucet, Wall Mount, 8" Adjustable Center with 6" Spout[1]
     

[1] Optional exterior coating SANI-GUARD™.

56-1545 Faucet, Wall Mount, 8" Adjustable Center with 12" Spout[1]
     

[1] Optional exterior coating SANI-GUARD™.

56-1546 Economy 8" Wall Faucet w/ 6" Swing Spout
     

56-1547 Economy 8" Wall Faucet w/ 16" Swing Spout
     

56-1548 Faucet, Wall Mount, 8" Adjustable Center with 14" Spout[1]
     

[1] Optional exterior coating SANI-GUARD™.

56-1549 Economy 8" Wall Faucet w/ 14" Swing Spout
     

56-1550 Economy 8" Wall Faucet w/ 12" Swing Spout
     

56-1551 Faucet, Wall Mount, 8" Adjustable Center with 8" Spout[1]
     

[1] Optional exterior coating SANI-GUARD™.

56-1552 Economy 8" Wall Faucet w/ 10" Swing Spout
     

56-1553 Faucet, Wall Mount, 8" Adjustable Center with 16" Spout[1]
     

[1] Optional exterior coating SANI-GUARD™.

56-1554 Economy 8" Wall Faucet w/ 8" Swing Spout
     

56-1555 Faucet, Wall Mount, 8" Adjustable Center with 10" Spout
     

56-1556 Wall Mount, 8" Center Faucet Base
     

56-1560 Economy 4" Deck Mount Faucet w/ 6" Gooseneck Spout
     

56-1562 Economy 4" Deck Mount Faucet w/ 6" Swing Spout
     

56-1564 Double Pantry Pre-Rinse Base, Ceramic Valves
     

56-1565 Wall Mount, 8" Center Pre-Rinse Base, Ceramic Valves
     

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Faucet Body[2] [G]

56-1542 Add-On Faucet Body - Less Spout
     

56-1557 Economy Wall Mount, 8" Center Faucet Base
     

[2] These models are NSF Certified faucet components. The assembly of components does not
    constitute a NSF Certified faucet. Complete faucet assemblies are NSF Certified only if
    the assembled faucet appears in NSF Listings.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Flexible Plumbing Connectors[G]

32-2156 44" Pre-Rinse Hose Assembly with Grip
     

32-2157 60” Pre-Rinse Hose Assembly with Grip
     

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Glass Fillers[1] [G]
56-1077 Deck Mount Glass Filler      
56-1079 Wall Mount Glass Filler      

[1] Optional exterior coating SANI-GUARD™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Miscellaneous Faucet Components
26-2430 1/4" NPT Hose Adapter[2] [G]      
26-2431 3/8" NPT Hose Adapter[2] [G]      
26-2432 1/2" NPT Hose Adapter[2] [G]      
51-1592 Button Valve Assembly[2] [G]      
56-1295 Foot Valve, Double Pedal[2] [G]      
56-1543 Pre-Rinse Spray Head Assembly[2] [G]      
56-1558 Deck Mount, 4" Center Faucet Base[2] [G]      
56-1559 Deck Mount, 8" Center Faucet Base[2] [G]      

[1] Optional exterior coating SANI-GUARD™.
[2] These models are NSF Certified faucet components. The assembly of components does not
    constitute a NSF Certified faucet. Complete faucet assemblies are NSF Certified only if
    the assembled faucet appears in NSF Listings.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Valves[2] [G]

51-1593 Cold Ceramic Valve Replacement
     

51-1594 Hot Ceramic Valve Replacement
     

[2] These models are NSF Certified faucet components. The assembly of components does not
    constitute a NSF Certified faucet. Complete faucet assemblies are NSF Certified only if
    the assembled faucet appears in NSF Listings.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
American AVK 
2155 Meridian Boulevard
Minden, NV 89423 
United States 
775-552-1400
Visit this company's website

Facility : Minden, NV

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fire Hydrants[G]
Series 27 Dry Barrel Fire Hydrants 4" - 8" CLD 23 MLTPL
Series 67 Post Hydrant 2" - 4" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Valves[G]
27-150-C9 Dry Barrel Hydrant Check Valve 6" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
American Cast Iron Pipe Company 
1501 North 31st Avenue
Birmingham, AL 35207 
United States 
205-325-8971
Visit this company's website

Facility : # 1 Birmingham, AL

Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings Only[1] [2] [G]
American Cast Iron Fittings 4" - 64" CLD 23 ASPH
American Cast Iron Fittings 4" - 64" CLD 23 CMNT
American Ductile Iron Fittings 4" - 64" CLD 23 ASPH
American Ductile Iron Fittings 4" - 64" CLD 23 CMNT
American Fastite® Fittings 4" - 64" CLD 23 ASPH
American Fastite® Fittings 4" - 64" CLD 23 CMNT
American Flanged Fittings 4" - 64" CLD 23 ASPH
American Flanged Fittings 4" - 64" CLD 23 CMNT
American Flex-Ring® Joint Fittings 4" - 64" CLD 23 ASPH
American Flex-Ring® Joint Fittings 4" - 64" CLD 23 CMNT
American Grooved Joint Fittings 4" - 64" CLD 23 ASPH
American Grooved Joint Fittings 4" - 64" CLD 23 CMNT
American Lok-Fast® Joint Fittings 4" - 64" CLD 23 ASPH
American Lok-Fast® Joint Fittings 4" - 64" CLD 23 CMNT
American Lok-Ring® Joint Fittings 4" - 64" CLD 23 ASPH
American Lok-Ring® Joint Fittings 4" - 64" CLD 23 CMNT
American Mechanical Joint Fittings 4" - 64" CLD 23 ASPH
American Mechanical Joint Fittings 4" - 64" CLD 23 CMNT
American Mechanical Joint Fittings-Retainer Gland 4" - 64" CLD 23 ASPH
American Mechanical Joint Fittings-Retainer Gland 4" - 64" CLD 23 CMNT
American Shouldered Joint Fittings 4" - 64" CLD 23 ASPH
American Shouldered Joint Fittings 4" - 64" CLD 23 CMNT
American Specials Fittings 4" - 64" CLD 23 ASPH
American Specials Fittings 4" - 64" CLD 23 CMNT
American Threaded Joint Fittings 4" - 64" CLD 23 ASPH
American Threaded Joint Fittings 4" - 64" CLD 23 CMNT

[1] Products also Certified for 100 mm - 1600 mm.
[2] Certification is for all fittings configurations in any combination.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Pipe Only[1] [G]
American Ductile Iron Pipe 4" - 64" CLD 23 ASPH
American Ductile Iron Pipe 8" - 64" CLD 23 CMNT
American Fastite® Joint Pipe 4" - 64" CLD 23 ASPH
American Fastite® Joint Pipe 8" - 64" CLD 23 CMNT
American Flanged Pipe 4" - 64" CLD 23 ASPH
American Flanged Pipe 8" - 64" CLD 23 CMNT
American Flex-Lok® Ball Joint Pipe 4" - 64" CLD 23 ASPH
American Flex-Lok® Ball Joint Pipe 8" - 64" CLD 23 CMNT
American Flex-Ring® Joint Pipe 4" - 64" CLD 23 ASPH
American Flex-Ring® Joint Pipe 8" - 64" CLD 23 CMNT
American Grooved Joint Pipe 4" - 64" CLD 23 ASPH
American Grooved Joint Pipe 8" - 64" CLD 23 CMNT
American Lok-Fast® Joint Pipe 4" - 64" CLD 23 ASPH
American Lok-Fast® Joint Pipe 8" - 64" CLD 23 CMNT
American Lok-Ring® Joint Pipe 4" - 64" CLD 23 ASPH
American Lok-Ring® Joint Pipe 8" - 64" CLD 23 CMNT
American MJ Coupled Joint Pipe 4" - 64" CLD 23 ASPH
American MJ Coupled Joint Pipe 8" - 64" CLD 23 CMNT
American Mechanical Joint Pipe 4" - 64" CLD 23 ASPH
American Mechanical Joint Pipe 8" - 64" CLD 23 CMNT
American Mechanical Joint Pipe-Retainer Gland 4" - 64" CLD 23 ASPH
American Mechanical Joint Pipe-Retainer Gland 8" - 64" CLD 23 CMNT
American Molox® Bolted Ball Joint Pipe 4" - 64" CLD 23 ASPH
American Molox® Bolted Ball Joint Pipe 8" - 64" CLD 23 CMNT
American Shouldered Joint Pipe 4" - 64" CLD 23 ASPH
American Shouldered Joint Pipe 8" - 64" CLD 23 CMNT
American Specials Pipe[3] 4" - 64" CLD 23 ASPH
American Specials Pipe[3] 8" - 64" CLD 23 CMNT
American Threaded Joint Pipe 4" - 64" CLD 23 ASPH
American Threaded Joint Pipe 8" - 64" CLD 23 CMNT

[1] Products also Certified for 100 mm - 1600 mm.
[3] All joint configurations.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Pipe [G]
Ductile Iron Pipe System for Hot Water[4] 8" - 64" D. HOT MLTPL

[4] Ductile Iron Pipe is lined with cement and then seal-coated with asphaltic coating.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
American Cast Iron Pipe Company 
1501 31st Avenue North
Birmingham, AL 35207 
United States 
205-325-8971

Facility : # 1 Bessemer, AL

Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Pipe[1] [2] [G]
American Fastite® Joint Pipe 12" - 64" D. HOT ASPH

[1] Certification includes authorized lubricant.
[2] Certification includes equivalent ISO metric sizes.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Facility : # 2 Bessemer, AL

Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Pipe[1] [2] [G]
American Fastite® Joint Pipe 3" - 12" CLD 23 ASPH

[1] Certification includes authorized lubricants.
[2] Certification includes equivalent ISO metric sizes.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
American Cast Iron Pipe Company (ACIPCO) 
1501 31st Avenue North
Birmingham, AL 35207 
United States 
205-325-8971

Facility : # 2 USA

Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Pipe Only[G]
Ductile Iron Pressure Pipe 3" - 16" CLD 23 ASPH
Ductile Iron Pressure Pipe 3" - 16" CLD 23 CMNT

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
AMERICAN Flow Control 
1501 North 31st Avenue
Birmingham, AL 35207 
United States 
800-326-8051 
205-325-7856
Visit this company's website

Facility : Conway, AR

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[1] [2] [G]
American Flow Control Series 2500 Resilient Wedge Gate Valve (25YY) NRS 2" - 3", 14" - 16" CLD 23 MLTPL
American Flow Control Series 2500 Resilient Wedge Gate Valve (25YY) OS&Y 14" - 16" CLD 23 MLTPL
American Flow Control Series 2500-1 Resilient Wedge Gate Valve (25XX-1) NRS 4" - 12" CLD 23 MLTPL
American Flow Control Series 2500-1 Resilient Wedge Gate Valve (25XX-1) OS&Y 4" - 12" CLD 23 MLTPL

[1] XX and YY refer to the size in inches.
[2] Certified for use in distribution systems only.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Facility : South St. Paul, MN

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fire Hydrants[G]
AMERICAN Waterous Pacer Fire Hydrant (Model W67-250) 5 1/4" CLD 23 MLTPL
AMERICAN Waterous Pacer Fire Hydrant (Model WB67-250) 5 1/4" CLD 23 MLTPL
AMERICAN Waterous Trend Fire Hydrant (Model WB77-1) 4 3/4" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Valves [G]
AMERICAN Waterous Series 6XX Swing Check Valves[1] [2] 3" - 12" CLD 23 MLTPL
American Flow Control Series 2500 Resilient Wedge Gate Valve (25YY) NRS[3] [4] 2" - 3", 14" - 30" CLD 23 MLTPL
American Flow Control Series 2500 Resilient Wedge Gate Valve (25YY) OS&Y[3] [4] 2" - 3", 14" - 24" CLD 23 MLTPL
American Flow Control Series 2500-1 Resilient Wedge Gate Valve (25XX-1) NRS[3] [4] 4" - 12" CLD 23 MLTPL
American Flow Control Series 2500-1 Resilient Wedge Gate Valve (25XX-1) OS&Y[3] [4] 4" - 12" CLD 23 MLTPL

[1] XX refers to size and may be 03, 04, 06, 08, 10 or 12.
[2] Certified for standard and outside shaft models.
[3] XX and YY refers to the size in inches.
[4] Certified for use in distribution systems only.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Facility : Beaumont, TX

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fire Hydrants[1] [G]
American-Darling B-62-B-5 Fire Hydrant 5.25" CLD 23 MLTPL
American-Darling Mark 73-5 Fire Hydrant 4.5" CLD 23 MLTPL
American-Darling B-84-B-BB-5 Fire Hydrant 6" CLD 23 MLTPL
American-Darling B-84-B-5 Fire Hydrant 5.25", 6" CLD 23 MLTPL
American-Darling B-62-B-BB-5 Fire Hydrant 5.25" CLD 23 MLTPL

[1] Certification does not include any connection gaskets.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Valves [G]
American Flow Control Series 2100 Resilient Seat Swing Check Valve (21XX)[2] [3] 3" - 16" CLD 23 MLTPL
American Flow Control Series 2500 Resilient Wedge Gate Valve (25YY) OS&Y[4] 14" - 24" CLD 23 MLTPL
American Flow Control Series 2500 Resilient Wedge Gate Valve (25YY) NRS[4] 14" - 66" CLD 23 MLTPL
American Flow Control Series 2500-1 Resilient Wedge Gate Valve (25XX-1) NRS[5] 4" - 12" CLD 23 MLTPL
Swing Check Valve - Series 52 SC[6] 3" - 16" CLD 23 MLTPL

[2] XX refers to the size of the valve in inches and may be 03, 04, 06, 08, 10, 12, 14, or
    16.
[3] Certified for use in distribution systems only.
[4] YY represents size in inches and may be 14, 16, 18, 20, 24, 30, 36, 42, 48, 54, 60, or
    66.
[5] XX represents size in inches and may be 04, 06, 08, 10, or 12.
[6] The Swing Check Valve - Series 52 SC may use a "lever and weight" or "lever and spring"
    option.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
American Granby Inc. 
7645 Henry Clay Boulevard
Liverpool, NY 13088-7000 
United States 
315-451-1100

Facility : Jiangsu, China

Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings[G]
PV697-1 1" CLD 23 PVC
PV697-1/2 1/2" CLD 23 PVC
PV697-11/2 1-1/2" CLD 23 PVC
PV697-11/4 1-1/4" CLD 23 PVC
PV697-2 2" CLD 23 PVC
PV697-21/2 2-1/2" CLD 23 PVC
PV697-3 3" CLD 23 PVC
PV697-3/4 3/4" CLD 23 PVC
PV697-4 4" CLD 23 PVC
PV698-1 1" CLD 23 PVC
PV698-1/2 1/2" CLD 23 PVC
PV698-11/2 1-1/2" CLD 23 PVC
PV698-11/4 1-1/4" CLD 23 PVC
PV698-2 2" CLD 23 PVC
PV698-21/2 2-1/2" CLD 23 PVC
PV698-3 3" CLD 23 PVC
PV698-3/4 3/4" CLD 23 PVC
PV698-4 4" CLD 23 PVC
PV797-1 1" CLD 23 PVC
PV797-1/2 1/2" CLD 23 PVC
PV797-11/2 1-1/2" CLD 23 PVC
PV797-11/4 1-1/4" CLD 23 PVC
PV797-2 2" CLD 23 PVC
PV797-21/2 2-1/2" CLD 23 PVC
PV797-3 3" CLD 23 PVC
PV797-3/4 3/4" CLD 23 PVC
PV797-4 4" CLD 23 PVC
PV798-1 1" CLD 23 PVC
PV798-1/2 1/2" CLD 23 PVC
PV798-11/2 1-1/2" CLD 23 PVC
PV798-11/4 1-1/4" CLD 23 PVC
PV798-2 2" CLD 23 PVC
PV798-21/2 2-1/2" CLD 23 PVC
PV798-3 3" CLD 23 PVC
PV798-3/4 3/4" CLD 23 PVC
PV798-4 4" CLD 23 PVC

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Valves[G]
HMIP100S 1" CLD 23 MLTPL
HMIP100SE 1" CLD 23 MLTPL
HMIP100T 1" CLD 23 MLTPL
HMIP100TE 1" CLD 23 MLTPL
HMIP125S 1 1/4" CLD 23 MLTPL
HMIP125SE 1 1/4" CLD 23 MLTPL
HMIP125T 1 1/4" CLD 23 MLTPL
HMIP125TE 1 1/4" CLD 23 MLTPL
HMIP150S 1 1/2" CLD 23 MLTPL
HMIP150SE 1 1/2" CLD 23 MLTPL
HMIP150T 1 1/2" CLD 23 MLTPL
HMIP150TE 1 1/2" CLD 23 MLTPL
HMIP200S 2" CLD 23 MLTPL
HMIP200SE 2" CLD 23 MLTPL
HMIP200T 2" CLD 23 MLTPL
HMIP200TE 2" CLD 23 MLTPL
HMIP250S 2 1/2" CLD 23 MLTPL
HMIP250SE 2 1/2" CLD 23 MLTPL
HMIP250T 2 1/2" CLD 23 MLTPL
HMIP250TE 2 1/2" CLD 23 MLTPL
HMIP300S 3" CLD 23 MLTPL
HMIP300SE 3" CLD 23 MLTPL
HMIP300T 3" CLD 23 MLTPL
HMIP300TE 3" CLD 23 MLTPL
HMIP400S 4" CLD 23 MLTPL
HMIP400SE 4" CLD 23 MLTPL
HMIP400T 4" CLD 23 MLTPL
HMIP400TE 4" CLD 23 MLTPL
HMIP50S 1/2" CLD 23 MLTPL
HMIP50SE 1/2" CLD 23 MLTPL
HMIP50T 1/2" CLD 23 MLTPL
HMIP50TE 1/2" CLD 23 MLTPL
HMIP75S 3/4" CLD 23 MLTPL
HMIP75SE 3/4" CLD 23 MLTPL
HMIP75T 3/4" CLD 23 MLTPL
HMIP75TE 3/4" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Facility : Taichung, Taiwan

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[G]
CMIP50C Compact Ball Valve 1/2" C. HOT CPVC
CMIP75C Compact Ball Valve 3/4" C. HOT CPVC
CMIP100C Compact Ball Valve 1" C. HOT CPVC
CMIP125C Compact Ball Valve 1 1/4" C. HOT CPVC
CMIP150C Compact Ball Valve 1 1/2" C. HOT CPVC
CMIP200C Compact Ball Valve 2" C. HOT CPVC
HMIP50S PVC Compact Ball Valve 1/2" CLD 23 MLTPL
HMIP75S PVC Compact Ball Valve 3/4" CLD 23 MLTPL
HMIP125S PVC Compact Ball Valve 1 1/4" CLD 23 MLTPL
HMIP150S PVC Compact Ball Valve 1 1/2" CLD 23 MLTPL
HMIP200S PVC Compact Ball Valve 2" CLD 23 MLTPL
HMIP250S PVC Compact Ball Valve 2 1/2" CLD 23 MLTPL
HMIP300S PVC Compact Ball Valve 3" CLD 23 MLTPL
HMIP400S PVC Compact Ball Valve 4" CLD 23 MLTPL
HMIP250SE Compact Ball Valve, Solvent Weld 2 1/2" CLD 23 PVC
HMIP300SE Compact Ball Valve, Solvent Weld 3" CLD 23 PVC
HMIP400SE Compact Ball Valve, Solvent Weld 4" CLD 23 PVC
HMIP50SE PVC Compact Ball Valve 1/2" CLD 23 MLTPL
HMIP75SE PVC Compact Ball Valve 3/4" CLD 23 MLTPL
HMIP100SE PVC Compact Ball Valve 1" CLD 23 MLTPL
HMIP125SE PVC Compact Ball Valve 1 1/4" CLD 23 MLTPL
HMIP150SE PVC Compact Ball Valve 1 1/2" CLD 23 MLTPL
HMIP200SE PVC Compact Ball Valve 2" CLD 23 MLTPL
HMIP250SE PVC Compact Ball Valve 2 1/2" CLD 23 MLTPL
HMIP300SE PVC Compact Ball Valve 3" CLD 23 MLTPL
HMIP400SE PVC Compact Ball Valve 4" CLD 23 MLTPL
HMIP50T PVC Compact Ball Valve 1/2" CLD 23 MLTPL
HMIP75T PVC Compact Ball Valve 3/4" CLD 23 MLTPL
HMIP100T PVC Compact Ball Valve 1" CLD 23 MLTPL
HMIP125T PVC Compact Ball Valve 1 1/4" CLD 23 MLTPL
HMIP150T PVC Compact Ball Valve 1 1/2" CLD 23 MLTPL
HMIP200T PVC Compact Ball Valve 2" CLD 23 MLTPL
HMIP250T PVC Compact Ball Valve 2 1/2" CLD 23 MLTPL
HMIP300T PVC Compact Ball Valve 3" CLD 23 MLTPL
HMIP400T PVC Compact Ball Valve 4" C. HOT MLTPL
HMIP250TE Compact Ball Valve, Threaded 2 1/2" CLD 23 PVC
HMIP300TE Compact Ball Valve, Threaded 3" CLD 23 PVC
HMIP400TE Compact Ball Valve, Threaded 4" CLD 23 PVC
HMIP50TE PVC Compact Ball Valve 1/2" CLD 23 MLTPL
HMIP75TE PVC Compact Ball Valve 3/4" CLD 23 MLTPL
HMIP100TE PVC Compact Ball Valve 1" CLD 23 MLTPL
HMIP125TE PVC Compact Ball Valve 1 1/4" CLD 23 MLTPL
HMIP150TE PVC Compact Ball Valve 1 1/2" CLD 23 MLTPL
HMIP200TE PVC Compact Ball Valve 2" CLD 23 MLTPL
HMIP250TE PVC Compact Ball Valve 2 1/2" CLD 23 MLTPL
HMIP300TE PVC Compact Ball Valve 3" CLD 23 MLTPL
HMIP400TE PVC Compact Ball Valve 4" CLD 23 MLTPL
HMIP100S PVC Compact Ball Valve 1" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings[G]
PV697-1/2 Unions 1/2" CLD 23 MLTPL
PV697-3/4 Unions 3/4" CLD 23 MLTPL
PV697-1 Unions 1" CLD 23 MLTPL
PV697-1 1/4 Unions 1 1/4" CLD 23 MLTPL
PV697-1 1/2 Unions 1 1/2" CLD 23 MLTPL
PV697-2 Unions 2" CLD 23 MLTPL
PV697-2 1/2 Unions 2 1/2" CLD 23 MLTPL
PV697-3 Unions 3" CLD 23 MLTPL
PV697-4 Unions 4" CLD 23 MLTPL
PV698-1/2 Unions 1/2" CLD 23 MLTPL
PV698-3/4 Unions 3/4" CLD 23 MLTPL
PV698-1 Unions 1" CLD 23 MLTPL
PV698-1 1/4 Unions 1 1/4" CLD 23 MLTPL
PV698-1 1/2 Unions 1 1/2" CLD 23 MLTPL
PV698-2 Unions 2" CLD 23 MLTPL
PV698-2 1/2 Unions 2 1/2" CLD 23 MLTPL
PV698-3 Unions 3" CLD 23 MLTPL
PV698-4 Unions 4" CLD 23 MLTPL
PV797-1/2 Unions 1/2" CLD 23 PVC
PV797-3/4 Unions 3/4" CLD 23 PVC
PV797-11/4 Unions 1 1/4" CLD 23 PVC
PV797-11/2 Unions 1 1/2" CLD 23 PVC
PV797-2 Unions 2" CLD 23 PVC
PV797-21/2 Unions 2 1/2" CLD 23 PVC
PV797-3 Unions 3" CLD 23 PVC
PV797-4 Unions 4" CLD 23 PVC
PV798-1/2 Unions 1/2" CLD 23 PVC
PV798-3/4 Unions 3/4" CLD 23 PVC
PV798-1 Unions 1" CLD 23 PVC
PV797-1 Unions 1" CLD 23 PVC
PV798-11/4 Unions 1 1/4" CLD 23 PVC
PV798-11/2 Unions 1 1/2" CLD 23 PVC
PV798-2 Unions 2" CLD 23 PVC
PV798-21/2 Unions 2 1/2" CLD 23 PVC
PV798-3 Unions 3" CLD 23 PVC
PV798-4 Unions 4" CLD 23 PVC

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
American Valve Inc. 
4321 Piedmont Parkway
Greensboro, NC 27410 
United States 
336-668-0554

Facility : # 1 China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[G]
ML1922-005 1/2" C. HOT MLTPL
ML1922-007 3/4" C. HOT MLTPL
ML1922-010 1" C. HOT MLTPL
ML1922-012 1 1/4" C. HOT MLTPL
ML1922-015 1 1/2" C. HOT MLTPL
ML1922-020 2" C. HOT MLTPL
ML2621-005 1/2" CLD 23 MLTPL
ML2621-007 3/4" CLD 23 MLTPL
ML2621-010 1" CLD 23 MLTPL
ML2621-012 1 1/4" CLD 23 MLTPL
ML2621-015 1 1/2" CLD 23 MLTPL
ML2621-020 2" CLD 23 MLTPL
ML2621-030 3" CLD 23 MLTPL
ML2621-030N 3" CLD 23 MLTPL
ML2622-005 1/2" CLD 23 MLTPL
ML2622-007 3/4" CLD 23 MLTPL
ML2622-010 1" CLD 23 MLTPL
ML2622-012 1 1/4" CLD 23 MLTPL
ML2622-015 1 1/2" CLD 23 MLTPL
ML2622-020 2" CLD 23 MLTPL
ML2622-030 3" CLD 23 MLTPL
ML2622-030N 3" CLD 23 MLTPL
ML2622-040 4" CLD 23 MLTPL
ML2622-040N 4" CLD 23 MLTPL
P200 1/2" CLD 23 MLTPL
P200 3/4" CLD 23 MLTPL
P200 1" CLD 23 MLTPL
P200 1 1/4" CLD 23 MLTPL
P200 1 1/2" CLD 23 MLTPL
P200 2" CLD 23 MLTPL
P200 2 1/2" CLD 23 MLTPL
P200 3" CLD 23 MLTPL
P200 4" CLD 23 MLTPL
P200-80 1/2" CLD 23 MLTPL
P200-80 3/4" CLD 23 MLTPL
P200-80 1" CLD 23 MLTPL
P200-80 1 1/4" CLD 23 MLTPL
P200-80 1 1/2" CLD 23 MLTPL
P200-80 2" CLD 23 MLTPL
P200-80 2 1/2" CLD 23 MLTPL
P200-80 3" CLD 23 MLTPL
P200-80 4" CLD 23 MLTPL
P200CTS 1/2" C. HOT MLTPL
P200CTS 3/4" C. HOT MLTPL
P200CTS 1" C. HOT MLTPL
P200CTS 1 1/4" C. HOT MLTPL
P200CTS 1 1/2" C. HOT MLTPL
P200CTS 2" C. HOT MLTPL
P200S 1/2" CLD 23 MLTPL
P200S 3/4" CLD 23 MLTPL
P200S 1" CLD 23 MLTPL
P200S 1 1/4" CLD 23 MLTPL
P200S 1 1/2" CLD 23 MLTPL
P200S 2" CLD 23 MLTPL
P200S 2 1/2" CLD 23 MLTPL
P200S 3" CLD 23 MLTPL
P200S 4" CLD 23 MLTPL
P200S-80 1/2" CLD 23 MLTPL
P200S-80 3/4" CLD 23 MLTPL
P200S-80 1" CLD 23 MLTPL
P200S-80 1 1/4" CLD 23 MLTPL
P200S-80 1 1/2" CLD 23 MLTPL
P200S-80 2" CLD 23 MLTPL
P200S-80 2 1/2" CLD 23 MLTPL
P200S-80 3" CLD 23 MLTPL
P200S-80 4" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings[G]
P600CTS CPVC Compression Coupling 1/2" - 1" CLD 23 MLTPL
P240S Unions, White Color 1/2" CLD 23 PVC

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Valves[G]
P200CTS CPVC Compact Ball Valve 1/2" C. HOT CPVC

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings[G]
P240S Unions, White Color 3/4" CLD 23 PVC

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Valves[G]
P200CTS CPVC Compact Ball Valve 3/4" C. HOT CPVC

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings[G]
P240S Unions, White Color 1" CLD 23 PVC

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Valves[G]
P200CTS CPVC Compact Ball Valve 1" C. HOT CPVC

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings[G]
P240S Unions, White Color 1 1/4" CLD 23 PVC
P240S Unions, White Color 1 1/2" CLD 23 PVC
P240S Unions, White Color 2" CLD 23 PVC
P243S Unions, Gray Color 1/2" CLD 23 PVC
P243S Unions, Gray Color 3/4" CLD 23 PVC
P243S Unions, Gray Color 1" CLD 23 PVC
P243S Unions, Gray Color 1 1/4" CLD 23 PVC
P243S Unions, Gray Color 1 1/2" CLD 23 PVC
P243S Unions, Gray Color 2" CLD 23 PVC
P240 Unions, White Color 3/4" CLD 23 PVC
P240 Unions, White Color 1" CLD 23 PVC
P240 Unions, White Color 1/2" CLD 23 PVC
P240 Unions, White Color 1 1/4" CLD 23 PVC
P240 Unions, White Color 1 1/2" CLD 23 PVC
P240 Unions, White Color 2" CLD 23 PVC
P243 Unions, Gray Color 1/2" CLD 23 PVC
P243 Unions, Gray Color 3/4" CLD 23 PVC
P243 Unions, Gray Color 1" CLD 23 PVC
P243 Unions, Gray Color 1 1/4" CLD 23 PVC
P243 Unions, Gray Color 1 1/2" CLD 23 PVC
P243 Unions, Gray Color 2" CLD 23 PVC

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Facility : Taichung, Taiwan

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[G]
ML1922-005 1/2" C. HOT MLTPL
ML1922-007 3/4" C. HOT MLTPL
ML1922-010 1" C. HOT MLTPL
ML1922-012 1 1/4" C. HOT MLTPL
ML1922-015 1 1/2" C. HOT MLTPL
ML1922-020 2" C. HOT MLTPL
ML2621-005 1/2" CLD 23 MLTPL
ML2621-007 3/4" CLD 23 MLTPL
ML2621-010 1" CLD 23 MLTPL
ML2621-012 1 1/4" CLD 23 MLTPL
ML2621-015 1 1/2" CLD 23 MLTPL
ML2621-020 2" CLD 23 MLTPL
ML2621-030 3" CLD 23 MLTPL
ML2621-030N 3" CLD 23 MLTPL
ML2622-005 1/2" CLD 23 MLTPL
ML2622-007 3/4" CLD 23 MLTPL
ML2622-010 1" CLD 23 MLTPL
ML2622-012 1 1/4" CLD 23 MLTPL
ML2622-015 1 1/2" CLD 23 MLTPL
ML2622-020 2" CLD 23 MLTPL
ML2622-030 3" CLD 23 MLTPL
ML2622-030N 3" CLD 23 MLTPL
ML2622-040 4" CLD 23 MLTPL
ML2622-040N 4" CLD 23 MLTPL
P200 1/2" CLD 23 MLTPL
P200 3/4" CLD 23 MLTPL
P200 1" CLD 23 MLTPL
P200 1 1/4" CLD 23 MLTPL
P200 1 1/2" CLD 23 MLTPL
P200 2" CLD 23 MLTPL
P200 2 1/2" CLD 23 MLTPL
P200 3" CLD 23 MLTPL
P200 4" CLD 23 MLTPL
P200-80 1/2" CLD 23 MLTPL
P200-80 3/4" CLD 23 MLTPL
P200-80 1" CLD 23 MLTPL
P200-80 1 1/4" CLD 23 MLTPL
P200-80 1 1/2" CLD 23 MLTPL
P200-80 2" CLD 23 MLTPL
P200-80 2 1/2" CLD 23 MLTPL
P200-80 3" CLD 23 MLTPL
P200-80 4" CLD 23 MLTPL
P200CTS 1/2" C. HOT MLTPL
P200CTS 3/4" C. HOT MLTPL
P200CTS 1" C. HOT MLTPL
P200CTS 1 1/4" C. HOT MLTPL
P200CTS 1 1/2" C. HOT MLTPL
P200CTS 2" C. HOT MLTPL
P200S 1/2" CLD 23 MLTPL
P200S 3/4" CLD 23 MLTPL
P200S 1" CLD 23 MLTPL
P200S 1 1/4" CLD 23 MLTPL
P200S 1 1/2" CLD 23 MLTPL
P200S 2" CLD 23 MLTPL
P200S 2 1/2" CLD 23 MLTPL
P200S 3" CLD 23 MLTPL
P200S 4" CLD 23 MLTPL
P200S-80 1/2" CLD 23 MLTPL
P200S-80 3/4" CLD 23 MLTPL
P200S-80 1" CLD 23 MLTPL
P200S-80 1 1/4" CLD 23 MLTPL
P200S-80 1 1/2" CLD 23 MLTPL
P200S-80 2" CLD 23 MLTPL
P200S-80 2 1/2" CLD 23 MLTPL
P200S-80 3" CLD 23 MLTPL
P200S-80 4" CLD 23 MLTPL
P200 Compact Ball Valves 2 1/2" CLD 23 PVC
P200 Compact Ball Valves 3" CLD 23 PVC
P200 Compact Ball Valves 4" CLD 23 PVC
P200S Compact Ball Valves 2 1/2" CLD 23 PVC
P200S Compact Ball Valves 3" CLD 23 PVC
P200S Compact Ball Valves 4" CLD 23 PVC
P201 Compact Ball Valves 1/2" - 4" CLD 23 MLTPL
P201S Compact Ball Valves 1/2" - 4" CLD 23 MLTPL
P202 Compact Ball Valves 1/2" - 2" CLD 23 MLTPL
P202S Compact Ball Valves 1/2" - 2" CLD 23 MLTPL
P203 Compact Ball Valves 1/2" C. HOT CPVC
P203 Compact Ball Valves 3/4" C. HOT CPVC
P203 Compact Ball Valves 1" C. HOT CPVC
P203 Compact Ball Valves 1 1/2" C. HOT CPVC
P203 Compact Ball Valves 1 1/4" C. HOT CPVC
P203 Compact Ball Valves 2" C. HOT CPVC
P203S Compact Ball Valves 1/2" C. HOT PVC
P203S Compact Ball Valves 3/4" C. HOT PVC
P203S Compact Ball Valves 1" CLD 23 PVC
P203S Compact Ball Valves 1 1/4" C. HOT CPVC
P203S Compact Ball Valves 1 1/2" C. HOT CPVC
P203S Compact Ball Valves 2" C. HOT CPVC

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings[G]
P240 Unions, White Color 2 1/2" CLD 23 PVC
P240 Unions, White Color 4" CLD 23 PVC
P240 Unions, White Color 3" CLD 23 PVC
P240S Unions, White Color 2 1/2" CLD 23 PVC
P240S Unions, White Color 4" CLD 23 PVC
P240S Unions, White Color 3" CLD 23 PVC
P243 Unions, Gray Color 2 1/2" CLD 23 PVC
P243 Unions, Gray Color 3" CLD 23 PVC
P243 Unions, Gray Color 4" CLD 23 PVC
P243S Unions, Gray Color 2 1/2" CLD 23 PVC
P243S Unions, Gray Color 4" CLD 23 PVC
P243S Unions, Gray Color 3" CLD 23 PVC

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Ames Fire & Waterworks, a Watts Water Technologies Co. 
1485 Tanforan Avenue
Woodland, CA 95776 
United States 
530-666-2493

Facility : Woodland, CA

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Backflow Preventers[1] [G]
C200-X-YY-ZZ-TT 2 1/2" - 10" CLD 23 MLTPL
C200a-X-YY-ZZ-TT 2 1/2" - 10" CLD 23 MLTPL
C400-X-YY-ZZ-TT 2 1/2" - 10" CLD 23 MLTPL
C400a-X-YY-ZZ-TT 2 1/2" - 10" CLD 23 MLTPL
M200-X-YY-ZZ-TT 2 1/2" - 10" CLD 23 MLTPL
M200a-X-YY-ZZ-TT 2 1/2" - 10" CLD 23 MLTPL
M400-X-YY-ZZ-TT 2 1/2" - 10" CLD 23 MLTPL
M400a-X-YY-ZZ-TT 2 1/2" - 10" CLD 23 MLTPL

[1] X - Valve pattern
        Blank - Straight
        N - N pattern
        Z - Z pattern
    YY - Backflow shutoff designation where 2 per units may be mixed like NRS x PIV 
         BFG  - Butterfly valve
         DNRS - Domestic non-rising stem gate
         DOSY - Domestic outside stem and yoke gate
         DPIV - Domestic post indicator gate
         NRS  - Non-rising stem gate
         OSY  - Outside stem and yoke gate
         PIV  - Post indicator gate
         QT   - Quarter turn ball valve
    ZZ - Inlet and outlet connections
         Blank - Flange by flange
         FxG - Flange by groove 
         GxF - Groove by flange
         GxG - Groove by groove
    TT - Strainer options
         Blank - No strainer
         S - 77F-DI-FDA-125 strainer
         S - SS Stainless Strainer 8000F
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Valves[2] [G]
605D Series 3" - 24" CLD 23 MLTPL
605S Series 6" - 24" CLD 23 MLTPL
905D Series 1 1/4" - 6" CLD 23 MLTPL
905S Series 4" - 16" CLD 23 MLTPL

[2] The following accessories are use with the globe or angle pattern control valve tubing
    and fittings:
    Model LFFBV-4, LFFBV-3C Ball Valves (1/4" - 1")
    Figure 60 Flow Clean Strainer (1/4" - 1")
    263SS Pressure reducing pilot
    Mechanical check option
    Anti-Cavitation trim option
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Ames Fire & Waterworks, a Watts Water Technologies Co. 
1485 Tanforan Avenue
Woodland, CA 95776 
United States 
530-666-2493

Facility : # 1 China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Strainer[1] [G]
LFAK 1/2" - 2" CLD 23 MLTPL

[1] Products have a marking exemption which allow product NSF-61 Marking and labels bearing
    the <= 0.25%.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Facility : # 4 Zhejiang, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[1] [G]
LFAFBV 1/2" - 2" CLD 23 MLTPL
LFAFBV-TC 1/2" - 2" CLD 23 MLTPL
LFAFBV-TC-TH 1/4" - 2" CLD 23 MLTPL
LFAFBV-TH 1/4" - 2" CLD 23 MLTPL
LFTC 1/2" - 3/4" CLD 23 MLTPL

[1] Products have a marking exemption which allow product NSF-61 Marking and labels bearing
    the <= 0.25%.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Facility : Franklin, NH

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Backflow Preventers [1] [G]
LF-2000B[1] 1/2" CLD 23 MLTPL
LF-2000B[1] 2" CLD 23 MLTPL
LF-2000B[1] 1 1/2" CLD 23 MLTPL
LF-2000B[1] 1 1/4" CLD 23 MLTPL
LF-2000B[1] 1" CLD 23 MLTPL
LF-2000B[1] 3/4" CLD 23 MLTPL
LF-4000B[1] 1/2" CLD 23 MLTPL
LF-4000B[1] 2" CLD 23 MLTPL
LF-4000B[1] 1 1/2" CLD 23 MLTPL
LF-4000B[1] 1 1/4" CLD 23 MLTPL
LF-4000B[1] 1" CLD 23 MLTPL
LF-4000B[1] 3/4" CLD 23 MLTPL
LF200B[2] 1/2" - 2" CLD 23 MLTPL
LF400B[2] 1/2" - 2" CLD 23 MLTPL

[1] LF - Lead free
[1] LF - Lead free
[2] Products may include one or more of the following prefixes or suffixes:
    S              - Lead Free Strainer
    LF (as prefix) - Lead free
    LF (as suffix) - Less fitting
    QT             - Quarter turn ball valve
    Options for non-wetted:
    C & T - Cap and tether test cock covers
    LH    - Locking handled ball valves
    SH    - Stainless handled ball valves
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
AMFAG S.p.A. 
Via G. Falcone, 3
46040 Casaloldo (MN) 
Italy 
39 037 673 661
Visit this company's website

Facility : Casaloldo (MN), Italy

Mechanical Plumbing Devices

Trade Designation      

Faucet Handspray Head Assembly
MICRO AAAABBCCDDEFGGHHIJKL[2] [G]      
MICRO EVO AAAABBCCDEEFGHHIJKLM[3] [G]      

[2] MICRO designations: 
    AAAA - Color (any alpha numeric characters) 
    BB   - Micro Style wand (GD, GJ, GS, MD, MJ, MS, PD, PJ, and PS) 
    CC   - Shell design (any alpha numeric characters) 
    DD   - Waterway (B1, B2, B3, B4, B5, B6, B7, B8, B9, C1, C2 
           G1, G2, G3, G4, G5, G6, L1, L2, L3, L4, L5, L6, M3,M4, M5, M6, P1, and P2) 
    E    - Distributor (1, 2, 3) 
    F    - Spring (0, 1, 2, 3, 4, 5, or 6) 
    GG   - Aerator (F1, F2, F3, F4, F5, F6, F7, F8, F9, J1, J2, J3, J4, J5, J6, J7, J8, 
           J9, K1, N1, N5, N6, N7, N8, N9, S1, S2, S3, V1, V5, V6, V7, V8, or V9) 
    HH   - Flow controller (00, 01, 02, 03, 04, 05, 10, 14, 15, 16, 17, 18, 19, or 20) 
    I    - Trigger (any single alpha or numeric characters) 
    J    - Faceplate (0, 1, 2, 3, 4, 5, 6, 7, and 8) 
    K    - Packaging (any single alpha or numeric characters) 
    L    - Customization (any single alpha or numeric characters)
[3] MICRO EVO Designations: 
    AAAA - Color (any alpha numeric characters) 
    BB   - Micro Evo Style wand (ED, EJ or ES) 
    CC   - Shell design (any alpha numeric characters) 
    D    - Threaded Distributor (1, 2, 3, 4, 5, or 6) 
    EE   - Waterway Extension (R1, R2, R3, R4, A1, A2, A3, A4, B1, B2, B3, or B4) 
    F    - Waterway (0, 1, 2, 3, or 4) 
    G    - Spring (0, 1, 2, 3, or 4) 
    HH   - Aerator (D1, D5, D6, D7, D8, D9, S2, J1, J2, J3, J4, J5, J6, J7, J8, or J9) 
    I    - Flow controller (0, 1, 2, 3, 4, 5) 
    J    - Trigger (any single alpha or numeric characters) 
    K    - Faceplate (0, 1, or 2) 
    L    - Packaging (any single alpha or numeric characters) 
    M    - Customization (any single alpha or numeric characters)
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Side Spray Diverter Valve
1757001[G]      

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Side Spray Diverter Valve Assembly
ABCDEFGH[5] [G]      

[5] Side Spray Diverter Valve Assembly
    ABCDEFGH
    A - Valve stem (1)
    B - Sealing washer (2)
    C - Valve shell (3)
    D - Shell O-ring (4)
    E - Conical washer (5)
    F - Side spray washer (6)
    G - Side spray housing (0,7,1)
    H - Side spray shell (0,8)
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Side Spray Diverter Valve with Housing
1757051[G]      

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Spray Valves

Doccia Concept Pulldown Spray [G]
AAAABBCCDDEFGHIJKKLM[6]      

[6] AAAA - Color (any four digit number)
      BB - Concept style wand (CG, CT, CY, EP, GP, OP, QP, TP, TX, or YP)
      CC - Waterway (G1, G2, T1, or T2)
      DD - Diverter shell (01, 02, 03)
       E - Eccentric plug (1, 2, 3, or 4)
       F - Spring (0, 1, or 2)
       G - Aerator (0, 1, 2, 5, A, C, E, F, G, H, J, K, L, M, S, T, U, V, W, X, Y, Z, 
           &, or £)
       H - Flow controller (0, 1, 2, 3, 4, 5, 6, 9, A, or B)
       I - Trigger cover (any single alpha or numeric character)
       J - Trigger cover insert (any single alpha or numeric character)
      KK - Faceplate style (D1, D2, D3, D4, D5, or D6)
       L - Packaging (any single digit number)
       M - Screen washer type (0, 1, or 2)
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Doccia Esterno Pullout Spray [G]
AAAABBCDEFGHIIJKLMMN[7]      

[7] AAAA - Color (any four digit number)
      BB - Moen style wand (MO)
       C - Waterway (5, G, H, K, L, M, N, P, R, T, U, or V)
       D - Circular insert (4 or 5)
       E - Spring (2,3, or 4)
       F - Aerator (0, 1, 2, 3, 4, 5, A, E, F, G, H, I, K, L, M,P, Q, U, V, Y, or Z)
       G - Flow controller (0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B,or C)
       H - Button/trigger cover (any single alpha or numeric character)
      II - Faceplate style (16, 51, A1, A2, A4, A6, A7, B1, B2,B3, B4, P1, P2, P3, or P5)
       J - Packaging (any single digit number)
       K - Screen washer type (0, 1, or 2)
       L - Unassigned (any single digit number)
      MM - Transition sleeve (any two digit number)
       N - Custom version (any single digit number)
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Doccia Macro Corta Pullout Spray [G]
AAAABBCDEFGHIIJKLMMN[8]      

[8] AAAA - Color (any four digit number)
       B - Macro Corta style wand (MC)
       C - Waterway (A, H, K, L, M, N, or P)
       D - Circular insert (4 or 5)
       E - Spring (0, 2, 3 or 4)
       F - Aerator (0, 1, 2, 5, A, E, F, G, H, I, J, K, L, M, P,Q, U, V, W, Y, Z, &, or £)
       G - Flow controller (0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, or C)
       H - Button/trigger cover (any single alpha or numeric character)
      II - Faceplate style (16, 51, A1, A2, A4, A6, A7, B1, B2,B3, B4, P1, P3, or P5)
       J - Packaging (any single digit number)
       K - Screen washer type (0, 1, or 2)
       L - Unassigned (any single digit number)
      MM - Trigger cover insert (any two alpha or numeric characters)
       N - Custom version (any single digit number)
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Doccia Macro Ergo Pullout Spray [G]
AAAABBCDEFGHIIJKLMMN[9]      

[9] AAAA - Color (any four digit number)
      BB - Macro Ergo style wand (ME)
       C - Waterway (5, 6, 8, 9, C, D, E, G, H, K, L, M, N, P, R, T, U, or V)
       D - Circular insert (4 or 5)
       E - Spring (0, 2, 3 or 4)
       F - Aerator (0, 1, 2, 5, A , E, F, G, H, I, J, K, L, M, P, Q, U, V, W, Y, Z, &, 
           or £)
       G - Flow controller (0, 1, 2, 3, 4 , 5 , 6, 7, 8, 9, A,B, or C)
       H - Button/trigger cover (any single alpha or numeric character)
      II - Faceplate style (16, 51, A1, A2, A4, A6, A7, B1, B2,B3, B4, P1, P2, P3, or P5)
       J - Package (any single digit number)
       K - Screen washer type (0, 1, or 2)
       L - Grip (any single digit number)
      MM - Trigger cover insert (any two alpha or numeric characters)
       N - Custom version (any single digit number)
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Doccia Macro Long Pullout Spray[G]
AAAABBCDEFGHIIJKLMMN[10]      

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    
[10] AAAA - Color (any four digit number)
       BB - Macro Long style wand (ML)
        C - Waterway (5, 6, 8, 9, C, D, E, G, H, K, L, M, N, P, R, T, U,or V)
        D - Circular insert (4 or 5)
        E - Spring (0, 2, 3 or 4)
        F - Aerator (0, 1, 2, 5, A, E, F, G, H, I, J, K, L, M, P,Q, U, V, W, Y, Z, &, or £)
        G - Flow controller (0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, or C)
        H - Button/trigger cover (any single alpha or numeric character)
       II - Faceplate style (16, 51, A1, A2, A4, A6, A7, B1, B2,B3, B4, P1, P3, or P5)
        J - Packaging (any single digit number)
        K - Screen washer type (0, 1, or 2)
        L - Unassigned (any single digit number)
       MM - Trigger cover insert (any two alpha or numeric characters)
        N - Custom version (any single digit number)

Doccia Signum Pullout Spray[G]
AAAABBCCDEFGHIJKLLMN[11]      

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    
[11] AAAA - Color (any four digit number)
       BB - Signum style wand (BK, MB, MN, MX, SB, SL, SR, or ST)
       CC - Waterway 1 (A1, A2, A3, A4, B1, B2, B3, F1, F3, G1,G2, M1, or M2)
        D - Waterway 1.1 (0, 1, 2, 3, or 4)
        E - Cap (1 or 2)
        F - Circular insert (1, 2, 3, or 4)
        G - Spring (0, 1, 2, 4 or 6)
        H - Aerator (0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, C, E, J, T or Q)
        I - Diverter stem assembly (1, 2, 3, or 4)
        J - Flow controller (0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B,C, E, or F)
        K - Button/trigger cover (any single alpha or numeric character)
       LL - Faceplate style (A1, A2, A3, B1, B2, B3, C1, C2, C3, D0, D1, D2, D3, D4, 
            D5, D6, D7, D8, D9, E1, E2 E3, or E4)
        M - Packaging (any single digit number)
        N - Screen washer type (0,1, or 2)

Grafic Pullout Spray[G]
AAAABCDEFGHIIJK[12]      

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    
[12] AAAA - Color (any four digit number)
        B - Grafic style wand (G)
        C - Waterway (1, 2, 3, 4, 5, 6, 7, A, B, C, G, H, L, M, N, or P)
        D - Circular insert (1 or 2)
        E - Spring (0, 2, 3 or 4)
        F - Aerator (0, 1, 2, 5, A, E, F, G, H, I, J, K, L, M, P, Q, U, V, W, Y, Z, &, 
            or £)
        G - Flow controller (0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, or C)
        H - Button/trigger cover (any single alpha or numeric character)
       II - Faceplate style (01, 03, 12, 13, 14, 15, 16, 17, 18,or 23)
        J - Packaging (any single digit number)
        K - Screen washer type (0,1, or 2)

Idea Pulldown Spray[G]
AAAABBCDEFGHIIJK[13]      

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    
[13] AAAA - Color (any alpha numeric characters)
       BB - Idea Style wand (IB, IC, ID, IG, IL, IO, IY, or IZ)
        C - Waterway (0, 1, 2, 3, 4, 5, 6, 7, 8 or 9)
        D - Distributor (1, 2, 3, 4, 5, 6, 7, 8, or 9)
        E - Spring (0, 1, 2, or 3)
        F - Aerator (0, 1, 2, 5, A, E, F, G, H, I, J, K, L, M, N, P, Q, U, V, W, Y, Z, 
            &, or £)
        G - Flow controller (0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, C, or D)
        H - Button/trigger cover (any single alpha or numeric character)
       II - Faceplate style (16, 51, A1, A2, A4, A6, A7, B1, B2,B3, B4, P1,P2, P3, or P5)
        J - Packaging (any single digit number)
        K - Screen washer type (0, 1, 2, or A)

Liberty Pullout Spray[G]
AAAABBCDEFGHIIJKLMMN[14]      

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    
[14] AAAA - Color (any four digit number)
       BB - Liberty style wand (LB)
        C - Waterway (5, 6, 7, 8, 9, C, E, G, H, K, L, M, N, P, R, T, U, or V)
        D - Circular insert (4 or 5)
        E - Spring (0, 2, 3 or 4)
        F - Aerator (0, 1, 2, 5, A, E, F, G, H, I, J, K, L, M, P, Q, U, V, W, Y, Z, 
            &, or £)
        G - Flow controller (0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, or C)
        H - Button/trigger cover (any single alpha or numeric character)
       II - Faceplate style (16, 51, A1, A2, A3, A4, A6, A7, B1,B2, B3, B4, P1, P2, P3, 
             or P5)
        J - Packaging (any single digit number)
        K - Screen washer type (0, 1, or 2)
        L - Handle ring trim (any single alpha or numeric character)
       MM - Handle (any two alpha or numeric characters)
        N - Head ring trim (any single alpha or numeric character)

Studio Pullout Spray[G]
AAAABCDEFGHIIJK[15]      

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    
[15] AAAA - Color (any four digit number)
        B - Studio style wand (S or Z)
        C - Waterway (1, 2, 3, 4, 5, 6, 7, 8, 9, B, C, E, G, H, K, L, M, N, P, R, 
            T, U, or V)
        D - Circular insert (4 or 5)
        E - Spring (0, 1, 2, 3, or 4)
        F - Aerator (0, 1, 2, 5, A, E, F, G, H, I, J, K, L, M, P, Q, U, V, W, Y, Z, 
            &, or £)
        G - Flow controller (0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, or C)
        H - Button/trigger cover (any single alpha or numeric character)
       II - Faceplate style (16, 51, A1, A2, A4, A6, A7, B1, B2,B3, B4, P1, P2, P3, or P5)
        J - Packaging (any single digit number)
        K - Screen washer type (0, 1, or 2)

Victoria Pullout Spray[G]
AAAABBCDEFGHIIJKLMMN[16]      

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    
[16] AAAA - color (any four digit number)
       BB - Victoria style wand (VI or VA)
        C - Waterway (5, 6, 8, 9, C, E, G, H, K, L, M, N, P, R, T, U, or V)
        D - Circular insert (4 or 5)
        E - Spring (0, 2, 3, or 4)
        F - Aerator (0, 1, 2, 5, A, E, F, G, H, I, J, K, L, M, P, Q, U, V, W, Y, Z, 
            &, or £)
        G - Flow controller (0, 1, 2, 3, 4, 5 , 6, 7, 8, 9, A, B, or C)
        H - Button/trigger cover (any single alpha or numeric character)
       II - Faceplate style (16, 51, A1, A2, A4, A6, A7, B1, B2,B3, B4, P1, P3, or P5)
        J - Packaging (any single digit number)
        K - Screen washer type (0, 1, or 2)
        L - Grip (any single alpha or numeric character)
       MM - (any two alpha or numeric characters)
        N - Custom version (any single alpha or numeric character)



 
Amiad Water Systems Ltd. 
D.N. Galil Elyon 1
12335 
Israel 
972 4 690 9500
Visit this company's website

Facility : Bet Zera, Jordan Valley, Israel

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filtration Devices/Components
2" SPIN KLIN™ DW filter[1] [2] [3] [G] [4] CLD 23 MLTPL
3" SPIN KLIN™ DW Filter[1] [2] [3] [G] [4] CLD 23 MLTPL
4" GALAXY PP SPIN-KLIN™ DW filter[1] [2] [3] [G] [4] CLD 23 MLTPL
6" GALAXY PP SPIN-KLIN™ DW filter[1] [2] [3] [G] [4] CLD 23 MLTPL
10" SUPER GALAXY PP SPIN KLIN™ DW Filter[1] [2] [3] [G] [4] CLD 23 MLTPL

[1] The filtration level (micron) and color which are used in each SK filter and may be any
    of the following:
    20  – Grey
    55  – Green
    70  – Brown
    100 – Black
    130 – Red
    200 – Yellow
    400 – Blue
[2] The spring type may be any of the following alphabetic codes:
    HSL   - Hastelloy
    LC    - Low Cost Energy
    LCHSL - Hastelloy-Low Cost Energy
    Regular (not indicated on product name)
[3] Inlet / outlet type may be any of the following:
    ARF - Flange
    Int - Integral
    Thr - Threaded
    Vic - Victaulic
[4] Certified for a minimum flow of 72,000 L/day.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Manifolds
Manifold DW (1-4 ports)[5] [G] 110mm - 315mm CLD 23 PP

[5] Certified for a maximum of 4 ports.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Amiad Water Systems Ltd. 
D.N. Galil Elyon 1
12335 
Israel 
800-243-4583 
704-662-3133
Visit this company's website

Facility : Israel

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filtration Devices/Components[1] [2] [G]
EBS 10000 DW 8" - 14" CLD 23 MLTPL
EBS 15000 DW 12" - 20" CLD 23 MLTPL
SAF 1500 DW 2" - 4" CLD 23 MLTPL
SAF 3000 DW 3" - 6" CLD 23 MLTPL
SAF 4500 DW 4" - 8" CLD 23 MLTPL
SAF 6000 DW 6" - 10" CLD 23 MLTPL

[1] Certified for a minimum daily flow of 300,000 liters.
[2] These products have filtration levels of 10-800 microns.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Anderson Metals Corporation Inc. 
1701 Southern Road
Kansas City, MO 64120 
United States 
800-821-5672 
816-471-2600
Visit this company's website

Facility : Kansas City, MO

Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings[1] [G]
700060-12 LF 760 SLEEVE AMC FREE 3/4" C. HOT BRASS
700060-14 LF 760 SLEEVE AMC FREE 7/8" C. HOT BRASS
700061-08 LF 761 NUT AMC FREE 1/2" C. HOT BRASS
700061-14 LF 761 NUT AMC FREE 7/8" C. HOT BRASS
700062-[XX] LF 762 UNION AMC FREE 3/16" - 7/8" C. HOT BRASS
700066-[YYYY] LF 766 FE COUP AMC FREE 1/8"x1/4"-3/4"x7/8" C. HOT BRASS
700068-[YYYY] LF 768 CONN AMC FREE 1/8"x1/8"-1/2"x7/8" C. HOT BRASS
700081-[XX] LF 761CX CAP AMC FREE 1/4" - 5/8" C. HOT BRASS
700082-[YYYY] LF 762R UNION AMC FREE 1/4"x3/8"-1/2"x5/8" C. HOT BRASS
700086-0610 LF 766S 3/8 X 5/8 SWT AD AMC FREE 3/8" x 5/8" C. HOT BRASS
700088-[YYYY] LF 768T CONNECTOR AMC FREE 3/16"x1/8"-5/8"x1/2" C. HOT BRASS
700092-[XX] LF 762T TANK UNION AMC FREE 3/8" - 7/8" C. HOT BRASS
700093-0404 LF 7406FC 1/4 X 1/4 COMP FLR AMC FREE 1/4" x 1/4" C. HOT BRASS
700094-0404 LF 7408FC COMP FLR AMC FREE 1/4" x 1/4" C. HOT BRASS
700096-[YYYY] LF 766T FE COUP AMC FREE 3/8"x3/8"-5/8"x1/2" C. HOT BRASS
700097-0604 LF 797 3/8 FE COMP X 1/4 COMP AMC FREE 3/8" x 1/4" C. HOT BRASS
700097-0806 LF 797 1/2 FE COMP X 3/8 COMP AMC FREE 1/2" x 3/8" C. HOT BRASS
700662-[XX] LF 762CP CP UNION AMC FREE 3/8" - 1/2" C. HOT BRASS
700666-[YYYY] LF 766CP FE COUP AMC FREE 3/8"x3/8"-1/2" x1/2" C. HOT BRASS
700668-[YYYY] LF 768CP CP CONN AMC FREE 3/8"x1/4"-5/8"x 1/2" C. HOT BRASS
700682-[YYYY] LF 762RCP UNION AMC FREE 3/8"x1/4"-5/8"x3/8" C. HOT BRASS
704014-[XX] LF 7441S SHORT NUT AMC FREE 1/4" - 3/4" C. HOT BRASS
704039-[XX] LF 7439 PLUG AMC FREE 3/8" - 5/8" C. HOT BRASS
704040-[XX] LF 7440 CAP AMC FREE 1/4" - 5/8" C. HOT BRASS
704042-[XX] LF 7402 UNION AMC FREE 1/4" - 5/8" C. HOT BRASS
704046-[YYYY] LF 7406 FE COUP AMC FREE 1/4"x3/8"-3/4"x5/8" C. HOT BRASS
704048-[YYYY] LF 7408 HALF UNION AMC FREE 1/8"x1/4"-3/4"x3/4" C. HOT BRASS
704056-[YYYY] LF 7506 RED UNION AMC FREE 1/4"x3/8"-1/2"x5/8" C. HOT BRASS
706109-08 LF 7109 PIPE PLUG AMC FREE 1/2" C. HOT BRASS
706110-[YYYY] LF 7110 HEX BUSHING AMC FREE 1/8"x1/4" - 3/4"x1" C. HOT BRASS
706112-[XX] LF 7112 CLOSE NIPPLE AMC FREE 1/8" - 3/4" C. HOT BRASS
706113-[ZZZZ] LF 7113 NIPPLE AMC FREE 1/8"x1½"-3/8"x2½" C. HOT BRASS
706114-08 LF 7109S 1/2 SQ HD SOLID PLUG AMC FREE 1/2" C. HOT BRASS
706120-[YYYY] LF 7120 ADAPTER AMC FREE 1/8"x1/8"-3/4"x3/4" C. HOT BRASS
706121-[XX] LF 7121 HEX HEAD PLUG AMC FREE 1/8" - 3/4" C. HOT BRASS
706122-[XX] LF 7122 HEX NIPPLE AMC FREE 1/4" - 1" C. HOT BRASS
706123-[YYYY] LF 7123 RED NIPPLE AMC FREE 1/8"x1/4"-1/2"x3/4" C. HOT BRASS
706125-[XX] LF 7121S SOLID HEX PLUG AMC FREE 1/8" - 1/2" C. HOT BRASS
706140-[YYYY] LF 7110F FACE BUSH AMC FREE 1/4"x1/8"-3/4"x1/2" C. HOT BRASS
706322-04 LF 7122L 1/4 LONG HEX NIPPLE AMC FREE 1/4" C. HOT BRASS
707001-[YYYY] LF 7129 1/8 X 1/8 HOSE BARB AMC FREE 1/8"x1/8" - 1"x1" C. HOT BRASS
707002-[YYYY] LF 7129F HOSE BARB AMC FREE 1/4"x1/4"-1/2"x1/2" C. HOT BRASS
707014-[XX] LF 7129S HOSE SPLICER AMC FREE 3/16"x3/16"-½"x½" C. HOT BRASS
707047-[YYYY] LF 7329S GH STEM AMC FREE 3/8"x3/4"-3/4"x3/4" C. HOT BRASS
707048-[YYYY] LF 7329M GH BARB AMC FREE 3/8"x3/4"-3/4"x3/4" C. HOT BRASS
707406-12 LF 7GHN1 3/4 HEX GH NUT AMC FREE 3/4" C. HOT BRASS
707407-12 LF 7GHN2 3/4 ROUND GH NUT AMC FREE 3/4" C. HOT BRASS
707411-1202 LF 7GHC1 3/4 X 1/8 GH ADAPT AMC FREE 1/8" x 3/4" C. HOT BRASS
707420-1204 LF 7102GH 3/4 X 1/4 SWIVEL AMC FREE 1/4" x 3/4" C. HOT BRASS
707478-1206 LF 777GH 3/4 X 3/8 GH CONN AMC FREE 3/8" x 3/4" C. HOT BRASS
707478-1208 LF 778GH 3/4 X 1/2 GH CONN AMC FREE 1/2" x 3/4" C. HOT BRASS
707478-121208 LF 779GHT 3/4 X 3/4 X 1/2 TAP AMC FREE 1/2" x 3/4" x 3/4" C. HOT BRASS
707480-1208 LF 780GH 3/4 X 1/2 GH CONN AMC FREE 1/2" x 3/4" C. HOT BRASS
707480-1212 LF 781GH 3/4 X 3/4 GH CONN AMC FREE 3/4" x 3/4" C. HOT BRASS
707484-1208 LF 784GH 3/4 X 1/2 GH CONN AMC FREE 1/2" x 3/4" C. HOT BRASS
707484-121208 LF 785GHT 3/4 X 3/4 X 1/2 TAP AMC FREE 3/4" x 3/4" x 1/2" C. HOT BRASS
707486-1212 LF 786GH 3/4 X 3/4 GH UNION AMC FREE 3/4" x 3/4" C. HOT BRASS
707486-121208 LF 786GHT 3/4 X 3/4 X 1/2 TAP AMC FREE 1/2" x 3/4" x 3/4" C. HOT BRASS
710061-08 LF AP761 NUT (2) AMC FREE 1/2" C. HOT BRASS
710062-[XX] LF AP762 UNION AMC FREE 1/4" - 5/8" C. HOT BRASS
710066-[YYYY] LF AP766 FE COUP AMC FREE 1/4"x1/8"-5/8"x1/2" C. HOT BRASS
710068-[YYYY] LF AP768 CONNECTOR AMC FREE 3/16"x1/8"-5/8"x1/2" C. HOT BRASS
710081-[XX] LF AP761CX CAP AMC FREE 1/4" - 5/8" C. HOT BRASS
710082-[YYYY] LF AP762R UNION AMC FREE 3/8"x1/4"-5/8"x1/2" C. HOT BRASS
714014-[10] LF AP7441S 5/8 SHORT NUT AMC FREE 5/8" C. HOT BRASS
714014-[XX] LF AP7441S SHORT NUT (2) AMC FREE 1/4" - 1/2" C. HOT BRASS
714039-[XX] LF AP7439 PLUG AMC FREE 3/8" - 5/8" C. HOT BRASS
714040-[XX] LF AP7440 CAP AMC FREE 1/4" - 5/8" C. HOT BRASS
714042-[XX] LF AP7402 UNION AMC FREE 1/4" x 5/8" C. HOT BRASS
714046-[YYYY] LF AP7406 FE COUP AMC FREE 3/8"x1/4"-5/8"x3/4" C. HOT BRASS
714048-[YYYY] LF AP7408 HF UNION AMC FREE 1/4"x1/8"-5/8"x1/2" C. HOT BRASS
714070-08 LF AP7700 1/2 SWIV CONNECTOR AMC FREE 1/2" C. HOT BRASS
717001-[YYYY] LF AP7129 HOSE BARB AMC FREE 1/8"x1/8"-1"x1" C. HOT BRASS
717002-[YYYY] LF AP7129F BARB AMC FREE 1/4"x1/4"-1/2"x1/2" C. HOT BRASS
717014-[XX] LF AP7129S HOSE SPLICER AMC FREE 3/16"-1/2" C. HOT BRASS
717478-1208 LF AP778GH 3/4 X 1/2 GH CONN AMC FREE 3/4" x 1/2" C. HOT BRASS
717478-121208 LF AP779GHT 3/4 X 3/4X 1/2 TAP AMC FREE 3/4"x3/4"x1/2" C. HOT BRASS
717480-1208 LF AP780GH 3/4 X 1/2 GH CONN AMC FREE 3/4" x 1/2" C. HOT BRASS
717480-1212 LF AP781GH 3/4 X 3/4 GH CONN AMC FREE 3/4" x 3/4" C. HOT BRASS
717484-1208 LF AP784GH 3/4 X 1/2 GH CONN AMC FREE 3/4" x 1/2" C. HOT BRASS
717484-121208 LF AP785GHT 3/4 X 3/4X 1/2 TAP AMC FREE 3/4"x3/4"x1/2" C. HOT BRASS
717486-121208 LF AP786GHT 3/4 X 3/4X 1/2 TAP AMC FREE 3/4"x3/4"x1/2" C. HOT BRASS
730060-12 PLF 760 SLEEVE AMC FREE 3/4" C. HOT BRASS
730061-07 PLF 761 7/16 NUT AMC FREE 7/16" C. HOT BRASS
730061-08 PLF 761 NUT (2) AMC FREE 1/2" C. HOT BRASS
730061-12 PLF 761 3/4 NUT AMC FREE 3/4" C. HOT BRASS
730081-[XX] PLF 761CX CAP AMC FREE 1/4" - 5/8" C. HOT BRASS
730097-[YYYY] LF 797 FE COMP x COMP AMC FREE 3/8"x1/4"-1/2"x3/8" C. HOT BRASS
736112-[XX] PLF 7112 CLOSE NIPPLE AMC FREE 1/8" - 3/4" C. HOT BRASS
736113-[YYYY] PLF 7113 NIPPLE AMC FREE 1/8"x1½"-3/8"x2½" C. HOT BRASS
736140-[YYYY] PLF 7110F FACE BUSH AMC FREE 3/8"x1/4"-3/4"x1/2" C. HOT BRASS
737042-[XX] PLF 7329 M/F GH SET AMC FREE 3/8" - 3/4" C. HOT BRASS
737046-[YYYY] PLF 7329F GH BARB AMC FREE 3/8"x3/4"-3/4"x3/4" C. HOT BRASS
737420-1204 PLF 7102GH 3/4 x 1/4 GH SWIVEL AMC FREE 3/4" x 1/4" C. HOT BRASS
750060-[XX] FLF 760 7/8 SLEEVE AMC FREE 7/8" C. HOT BRASS
750061-[XX] FLF 761 7/8 NUT AMC FREE 7/8" C. HOT BRASS
750062-[XX] FLF 762 UNION AMC FREE 3/16" -7/8" C. HOT BRASS
750064-02 FLF 764 1/8 TEE AMC FREE 1/8" C. HOT BRASS
750066-[YYYY] FLF 766 FE COUP AMC FREE 1/8"x1/8"-7/8"x3/4" C. HOT BRASS
750066-[YYYY] FLF 766 FE COUP AMC FREE 1/8"x1/8"-7/8"x3/4" C. HOT BRASS
750068-[YYYY] FLF 768 CONN AMC FREE 1/8"x1/8"-7/8"x3/4" C. HOT BRASS
750069-[YYYY] FLF 769 ELBOW AMC FREE 3/16"x1/4"-7/8"x3/4" C. HOT BRASS
750070-[YYYY] FLF 770 FE ELBOW AMC FREE 1/8"x1/8"-5/8"x1/2" C. HOT BRASS
750071-[YYYY] FLF 771 TEE AMC FREE 3/16"x1/8"-3/8"x3/8" C. HOT BRASS
750072-[YYYY] FLF 772 TEE AMC FREE [2] C. HOT BRASS
750078-[YYYY] FLF 778 TEE AMC FREE 3/8"x1/8"-5/8"x1/8" C. HOT BRASS
750082-[YYYY] FLF 762R UNION AMC FREE 1/4"x1/8"-5/8"x1/2" C. HOT BRASS
750082-[YYYY] FLF 762R UNION AMC FREE 1/4"x1/8"-5/8"x1/2" C. HOT BRASS
750084-080806 FLF 764R 1/2 x 1/2 x3/8 TEE AMC FREE 1/2" x 1/2" x 3/8" C. HOT BRASS
750084-101006 FLF 764R 5/8 x 5/8 x 3/8 TEE AMC FREE 5/8" x 5/8" x 3/8" C. HOT BRASS
750086-0610 FLF 766S 3/8X5/8 SWT ADT AMC FREE 3/8" x 5/8" C. HOT BRASS
750097-[YYYY] FLF 797 FE COMP x COMP AMC FREE 3/8"x1/4"-1/2"x3/8" C. HOT BRASS
754014-[XX] FLF 7441S SHORT NUT AMC FREE 1/8"-3/4" C. HOT BRASS
754014-[XX] FLF 7441S SHORT NUT AMC FREE 1/8" - 3/4" C. HOT BRASS
754039-[XX] FLF 7439 PLUG AMC FREE 3/8" - 5/8" C. HOT BRASS
754040-[XX] FLF 7440 CAP AMC FREE 1/4" - 5/8" C. HOT BRASS
754042-[XX] FLF 7402 UNION AMC FREE 1/4" - 3/4" C. HOT BRASS
754042-[XX] FLF 7402 UNION AMC FREE 1/4" - 3/4" C. HOT BRASS
754045-[YYYY] FLF 7405 TEE AMC FREE 1/4"x1/8"-1/4"x3/8" C. HOT BRASS
754046-[YYYY] FLF 7406 FE COUP AMC FREE 3/16"x1/8"-5/8"x3/4" C. HOT BRASS
754046-[YYYY] FLF 7406 FE COUP AMC FREE 3/16"x1/8"-5/8"x3/4" C. HOT BRASS
754048-[YYYY] FLF 7408 HALF UNION AMC FREE 1/8"x1/8"-7/8"x3/4" C. HOT BRASS
754048-[YYYY] FLF 7408 HALF UNION AMC FREE 1/8"x1/8"-7/8"x3/4" C. HOT BRASS
754049-[YYYY] FLF 7409 ELBOW AMC FREE 3/16"x1/8"-3/4"x3/4" C. HOT BRASS
754050-[YYYY] FLF 7500 ELBOW AMC FREE 1/4"x1/8"-3/8"x1/4" C. HOT BRASS
754051-[YYYY] FLF 7501 TEE AMC FREE 1/4"x1/4"-3/8"x3/8" C. HOT BRASS
754056-[YYYY] FLF 7506 RED UNION AMC FREE 3/8"x1/4"-5/8"x1/2" C. HOT BRASS
754057-0806 FLF 7507 1/2 x 3/8 RED ELBOW AMC FREE 1/2" x 3/8" C. HOT BRASS
756100-[XX] FLF 7100 ELBOW AMC FREE 1/2" - 3/4" C. HOT BRASS
756101-[XX] FLF 7101 TEE AMC FREE 1/2" - 3/4" C. HOT BRASS
756102-[XX] FLF 7102 CROSS AMC FREE 1/8" - 3/4" C. HOT BRASS
756107-04 FLF 710045 1/4 45 ELBOW AMC FREE 1/4" C. HOT BRASS
756108-12 FLF 7108 3/4 CAP AMC FREE 3/4" C. HOT BRASS
756109-08 FLF 7109 1/2 PIPE PLUG AMC FREE 1/2" C. HOT BRASS
756109-12 FLF 7109 3/4 PIPE PLUG AMC FREE 3/4" C. HOT BRASS
756110-[YYYY] FLF 7110 HEX BUSHING AMC FREE 1/4"x1/8"-3/4"x1/2" C. HOT BRASS
756110-[YYYY] FLF 7110 HEX BUSHING AMC FREE 1/4"x1/8" - 1"x3/4" C. HOT BRASS
756114-[XX] FLF 7109S SQ HD SOLID PLUG AMC FREE 1/8" - 3/8" C. HOT BRASS
756116-[XX] FLF 7116 STREET ELBOW AMC FREE 1/2" - 3/4" C. HOT BRASS
756119-1208 FLF 7119 3/4 x 1/2 RED COUP AMC FREE 3/4" x 1/2" C. HOT BRASS
756120-[YYYY] FLF 7120 ADAPTER AMC FREE 1/8"x1/8"-1/2"x1/2" C. HOT BRASS
756120-[YYYY] FLF 7120 ADAPTER AMC FREE 1/8"x1/8"-1/2"x1/2" C. HOT BRASS
756121-[XX] FLF 7121 HEX HEAD PLUG AMC FREE 1/8"-1/2" C. HOT BRASS
756121-[XX] FLF 7121 HEX HEAD PLUG AMC FREE 1/8" - 3/4" C. HOT BRASS
756122-[XX] FLF 7122 HEX NIPPLE AMC FREE 1/4" - 3/4" C. HOT BRASS
756122-[XX] FLF 7122 HEX NIPPLE AMC FREE 1/4" - 1" C. HOT BRASS
756123-[YYYY] FLF 7123 RED NIPPLE AMC FREE 1/4"x1/8"-3/4"x1/2" C. HOT BRASS
756123-[YYYY] FLF 7123 RED NIPPLE AMC FREE 1/4"x1/8"-3/4"x1/2" C. HOT BRASS
756125-[XX] FLF 7121S SOLID HEX PLUG AMC FREE 1/8" - 1/2" C. HOT BRASS
756130-[XX] FLF 7130 ELBOW AMC FREE 1/8" - 3/8" C. HOT BRASS
756201-[XX] FLF 7101F FGD TEE AMC FREE 1/8" - 3/4" C. HOT BRASS
756235-[YYYY] FLF 7130R RED ELBOW AMC FREE 1/4"x1/8"-1/2"x3/8" C. HOT BRASS
757001-[YYYY] FLF 7129 HOSE BARB AMC FREE 1/8"x1/8"-1"x1" C. HOT BRASS
757002-[YYYY] FLF 7129F HOSE BARB AMC FREE 1/4"x1/4"-1/2"x1/2" C. HOT BRASS
757014-[XX] FLF 7129S HOSE SPLICER AMC FREE 3/16"-1/2" C. HOT BRASS
757048-[YYYY] FLF 7329M GH BARB AMC FREE 3/8"x3/4"-3/4"x3/4" C. HOT BRASS
757411-1202 FLF 7GHC1 3/4 X 1/8 GH ADAPT AMC FREE 3/4" x 1/8" C. HOT BRASS
757478-1208 FLF 778EV 3/4 X 1/2 GH CONN AMC FREE 3/4" x 1/2" C. HOT BRASS
757478-121208 FLF 779EVT 3/4 X 3/4X 1/2 TAP AMC FREE 3/4" x 3/4" x 1/2" C. HOT BRASS
757480-1204 FLF 774GH 3/4 x 1/4 GH CONN AMC FREE 3/4" x 1/4" C. HOT BRASS
757480-1208 FLF 780EV 3/4 X 1/2 GH CONN AMC FREE 3/4" x 1/2" C. HOT BRASS
757480-1212 FLF 781EV 3/4 X 3/4 GH CONN AMC FREE 3/4" x 3/4" C. HOT BRASS
757484-1208 FLF 784EV 3/4 X 1/2 GH CONN AMC FREE 3/4" x 1/2" C. HOT BRASS
757484-121208 FLF 785EVT 3/4 X 3/4X 1/2 TAP AMC FREE 3/4" x 3/4" x 1/2" C. HOT BRASS
757486-121208 FLF 786EVT 3/4 X 3/4X 1/2 TAP AMC FREE 3/4" x 3/4" x 1/2" C. HOT BRASS

[1] Fitting sizes are coded by the following conventions.
    XX:
    02 - 1/8"
    03 - 3/16"
    04 - 1/4"
    05 - 5/16"
    06 - 3/8"
    08 - 1/2"
    10 - 5/8"
    12 - 3/4"
    14 - 7/8"
    16 - 1"
    [YYYY]:
    0202 - 1/8" x 1/8"
    0204 - 1/8" x 1/4"
    0302 - 3/16" x 1/8"
    0304 - 3/16" x 1/4"
    0402 - 1/4" x 1/8"
    0403 - 1/4" x 3/16"
    0404 - 1/4" x 1/4"
    0406 - 1/4" x 3/8"
    0408 - 1/4" x 1/2"
    0502 - 5/16" x 1/8"
    0504 - 5/16" x 1/4"
    0506 - 5/16" x 3/8"
    0508 - 5/16" x 1/2"
    0602 - 3/8" x 1/8"
    0604 - 3/8" x 1/4"
    0605 - 3/8" x 5/16"
    0606 - 3/8" x 3/8"
    0608 - 3/8" x 1/2"
    0610 - 3/8" x 5/8"
    0612 - 3/8" x 3/4"
    0704 - 7/16" x 1/4"
    0706 - 7/16" x 3/8"
    0802 - 1/2" x 1/8"
    0804 - 1/2" x 1/4"
    0806 - 1/2" x 3/8"
    0808 - 1/2" x 1/2"
    0812 - 1/2" x 3/4"
    1006 - 5/8" x 3/8"
    1008 - 5/8" x 1/2"
    1012 - 5/8" x 3/4"
    1202 - 3/4" x 1/8"
    1204 - 3/4" x 1/4"
    1206 - 3/4" x 3/8"
    1208 - 3/4" x 1/2"
    1212 - 3/4" x 3/4"
    1408 - 7/8" x 1/2"
    1412 - 7/8" x 3/4"
    1416 - 7/8" x 1"
    1508 - 15/16" x 1/2"
    1512 - 15/16" x 3/4"
    1604 - 1" x 1/4"
    1606 - 1" x 3/8"
    1608 - 1" x 1/2"
    1612 - 1" x 3/4"
    1616 - 1" x 1"
    [ZZZZ]:
    0224 - 1/8" x 1/8", 1 1/2" Long Nipple
    0232 - 1/8" x 1/8", 2" Long Nipple
    0240 - 1/8" x 1/8", 2 1/2" Long Nipple
    0248 - 1/8" x 1/8", 3" Long Nipple
    0424 - 1/4" x 1/4", 1 1/2" Long Nipple
    0432 - 1/4" x 1/4", 2" Long Nipple
    0440 - 1/4" x 1/4", 2 1/2" Long Nipple
    0448 - 1/4" x 1/4", 3" Long Nipple
    0624 - 3/8" x 3/8", 1 1/2" Long Nipple
    0632 - 3/8" x 3/8", 2" Long Nipple
    0640 - 3/8" x 3/8", 2 1/2" Long Nipple
[2] 5/16" x 1/8" - 5/16" x 1/4"
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Anderson Metals Corporation, Inc. 
P.O. Box 34200
1701 Souther Road 
Kansas City, MO 64120 
United States 
816-471-2600

Facility : #9903

Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings[1] [G]
700060-[YY] LF 760 Sleeve AMC Free 1/8" - 7/8" C. HOT BRASS
700061-[YY] LF 761 Nut AMC Free 1/8" - 7/8" C. HOT BRASS
700062-[YY] LF 762 Union AMC Free 1/8" - 7/8" C. HOT BRASS
700064-[YY] LF 764 Tee AMC Free 1/8" - 7/8" C. HOT BRASS
700065-[YY] LF 765 Elbow AMC Free 1/8" - 7/8" C. HOT BRASS
700066-[YYZZ] LF 766 FE Coup AMC Free 1/8"x1/8"-7/8"x3/4" C. HOT BRASS
700068-[YYZZ] LF 768 Connector AMC Free 1/8"x1/8" - 7/8"x1" C. HOT BRASS
700069-[YYZZ] LF 769 Elbow AMC Free 1/8"x1/8"-7/8"x3/4" C. HOT BRASS
700070-[YYZZ] LF 770 FE Elbow AMC Free 1/8"x1/8"-5/8"x3/4" C. HOT BRASS
700071-[YYZZ] LF 771 Tee AMC Free 3/16"x1/8"-1/2"x3/8" C. HOT BRASS
700072-[YYZZ] LF 772 Tee AMC Free 1/8"x1/8"-3/4"x3/4" C. HOT BRASS
700075-040202 LF 775 Tee AMC Free 1/4" x 1/8" x 1/8" C. HOT BRASS
700076-[YYZZ] LF 776 Tee AMC Free 1/4"x1/8"-3/8"x1/4" C. HOT BRASS
700078-[YYZZ] LF 778 Tee AMC Free 1/4"x1/8"-5/8"x1/8" C. HOT BRASS
700081-[YY] LF 761CX Cap AMC Free 1/4" - 5/8" C. HOT BRASS
700082-[YYZZ] LF 762R Union AMC Free 1/4"x1/8"-5/8"x1/2" C. HOT BRASS
700084-[YYZZXX] LF 764R Tee AMC Free [3] C. HOT BRASS
700085-[YYZZ] LF 765R Red Elbow AMC Free 3/8"x1/4"-5/8"x1/2" C. HOT BRASS
700088-[YYZZ] LF 768T Connector AMC Free 3/16"x1/8"-5/8"x3/4" C. HOT BRASS
700092-[YY] LF 762T Tank Union AMC Free 3/8" - 7/8" C. HOT BRASS
700094-[YYZZ] LF 7408FC COMP FLR AMC Free 1/4" x 1/4" C. HOT BRASS
700661-[YY] LF 761CP CP Nut 1/4" - 5/8" C. HOT BRASS
700662-[YY] LF 762CP Union AMC Free 3/8" - 1/2" C. HOT BRASS
700664-[YY] LF 764CP Tee AMC Free 3/8" - 1/2" C. HOT BRASS
700665-[YY] LF 765CP CP Elbow AMC Free 3/8" - 1/2" C. HOT BRASS
700666-[YYZZ] LF 766CP FE Coup AMC Free 3/8"x3/8"-1/2"x1/2" C. HOT BRASS
700668-[YYZZ] LF 768CP CP Connector AMC Free 3/8"x1/4"-5/8"x1/2" C. HOT BRASS
700669-[YYZZ] LF 769CP CP Elbow AMC Free 3/8"x1/4"-1/2"x1/2" C. HOT BRASS
700670-0608 LF 770CP FE Elbow AMC Free 3/8" x 1/2" C. HOT BRASS
700682-[YYZZ] LF 762RCP Union AMC Free 3/8"x1/4"-5/8"x1/2" C. HOT BRASS
700685-[1006] LF 765RCP CP Elbow AMC Free 5/8" x 3/8" C. HOT BRASS
704014-[YY] LF 7441S Short Nut AMC Free 1/8" - 1" C. HOT BRASS
704018-[YY] LF 76401S Short FGD Nut AMC Free 3/16" - 1" C. HOT BRASS
704020-[YYZZ] LF 76602S Red Nut AMC Free 3/8"x1/4"-5/8"x1/2" C. HOT BRASS
704039-[YY] LF 7439 Plug AMC Free 3/16" - 3/4" C. HOT BRASS
704040-[YY] LF 7440 Cap AMC Free 3/16" - 3/4" C. HOT BRASS
704042-[YY] LF 7402 Union AMC Free 1/8" - 3/4" C. HOT BRASS
704044-[YY] LF 7404 Tee AMC Free 1/8" - 7/8" C. HOT BRASS
704045-[YYZZ] LF 7405 Tee AMC Free 1/4"x1/8"-5/8"x1/2" C. HOT BRASS
704046-[YYZZ] LF 7406 FE Coup AMC Free 1/8"x1/8"-7/8"x3/4" C. HOT BRASS
704048-[YYZZ] LF 7408 Half Union AMC Free 1/8"x1/8"-7/8"x3/4" C. HOT BRASS
704049-[YYZZ] LF 7409 Elbow AMC Free 1/8"x1/8"-3/4"x3/4" C. HOT BRASS
704050-[YYZZ] LF 7500 Elbow AMC Free 3/16"x1/8"-3/4"x3/4" C. HOT BRASS
704051-[YYZZ] LF 7501 Tee AMC Free 1/4"x1/4"-3/8"x3/8" C. HOT BRASS
704055-[YY] LF 7505 Elbow AMC Free 1/8" - 5/8" C. HOT BRASS
704056-[YYZZ] LF 7506 Red Union AMC Free 1/4"x3/16"-3/4"x5/8" C. HOT BRASS
704057-[YYZZ] LF 7507 Red Elbow AMC Free 1/2" x 3/8" C. HOT BRASS
704058-[080808] LF 7508FP Tee AMC Free 1/2" x 1/2" x 1/2" C. HOT BRASS
704059-[YYZZXX] LF 7509 Tee AMC Free [4] C. HOT BRASS
706100-[YY] LF 7100 Elbow AMC Free 1/8" - 3/4" C. HOT BRASS
706101-[YY] LF 7101 Tee AMC Free 1/8" - 3/4" C. HOT BRASS
706102-[YY] LF 7102 Cross AMC Free 1/8" - 3/4" C. HOT BRASS
706103-[YY] LF 7103 Coupling AMC Free 1/8" - 3/4" C. HOT BRASS
706107-[YY] LF 710045 45 Elbow AMC Free 1/8" - 1/4" C. HOT BRASS
706108-[YY] LF 7108 Cap AMC Free 1/8" - 3/4" C. HOT BRASS
706109-[YY] LF 7109 Pipe Plug AMC Free 1/8" - 1" C. HOT BRASS
706110-[YYZZ] LF 7110 Hex Bushing AMC Free 1/4"x1/8" -1"x3/4" C. HOT BRASS
706112-[YY] LF 7112 Close Nipple AMC Free 1/8" - 3/4" C. HOT BRASS
706113-[YYZZ] LF 7113 Nipple AMC Free 1/8"x1½" - 3/8"x2½" C. HOT BRASS
706114-[YY] LF 7109S SQ HD Solid Plug AMC Free 1/8" - 3/8" C. HOT BRASS
706116-[YY] LF 7116 Street Elbow AMC Free 1/8" - 3/4" C. HOT BRASS
706119-[YYZZ] LF 7119 Red Coupling AMC Free 1/4"x1/8"-3/4"x1/2" C. HOT BRASS
706120-[YYZZ] LF 7120 Adapter AMC Free 1/8"x1/8"-1/2"x1/2" C. HOT BRASS
706121-[YY] LF 7121 Hex Head Plug AMC Free 1/8" - 1" C. HOT BRASS
706122-[YY] LF 7122 Hex Nipple AMC Free 1/8" - 1" C. HOT BRASS
706123-[YYZZ] LF 7123 Red Nipple AMC Free 1/4"x1/8"-3/4"x1/2" C. HOT BRASS
706130-[YY] LF 7130 Elbow AMC Free 1/8" - 3/8" C. HOT BRASS
706201-[YY] LF 7101F FGD Tee AMC Free 1/8" - 3/4" C. HOT BRASS
706235-[YYZZ] LF 7130R Red Elbow AMC Free 1/4"x1/8"-1/2"x3/8" C. HOT BRASS
707001-[0202] LF 7129 Hose Barb AMC Free 1/8" x 1/8" C. HOT BRASS
707002-[YYZZ] LF 7129F Hose Barb AMC Free 1/8"x1/8"-1/2"x1/2" C. HOT BRASS
707003-[YYZZ] LF 7129SWV SWVL Barb AMC Free 1/4"x1/4"- 3/4"x3/4" C. HOT BRASS
707014-[YY] LF 7129S Hose Splicer AMC Free 3/16" - 3/4" C. HOT BRASS
707042-[YY] LF 7329M/F GH Set AMC Free 3/8" - 3/4" C. HOT BRASS
707046-[YYZZ] LF 7329F GH Barb AMC Free 3/8"x3/4"- 3/4"x3/4" C. HOT BRASS
707047-[YYZZ] LF 7329S GH Stem AMC Free 3/8"x3/4"- 3/4"x3/4" C. HOT BRASS
707048-[YYZZ] LF 7329M GH Barb AMC Free 3/8"x3/4"- 3/4"x3/4" C. HOT BRASS
707406-[YY] LF 7GHN1 Hex GH Nut AMC Free 3/4" C. HOT BRASS
707420-[1204] LF 7102EV Swivel AMC Free 3/4" x 1/4" C. HOT BRASS
707420-[1206] LF 7103EV GH Swivel AMC Free 3/4" x 3/8" C. HOT BRASS
707420-[1208] LF 7104EV Swivel AMC Free 3/4" x 1/2" C. HOT BRASS
707480-[1204] LF 774EV GH CONN AMC Free 3/4" x 1/4" C. HOT BRASS
707480-[1206] LF 775EV GH CONN AMC Free 3/4" x 3/8" C. HOT BRASS
707480-[1208] LF 780EV GH CONN AMC Free 3/4" x 1/2" C. HOT BRASS
707480-[1212] LF 781EV GH CONN AMC Free 3/4" x 3/4" C. HOT BRASS
707482-[1208] LF 782EV GH CONN AMC Free 3/4" x 1/2" C. HOT BRASS
707482-[1212] LF 783EV GH CONN AMC Free 3/4" x 3/4" C. HOT BRASS
707484-[1208] LF 784EV GH CONN AMC Free 3/4" x 1/2" C. HOT BRASS
707484-[121208] LF785EVT Tap AMC Free 3/4" x 3/4" x 1/2" C. HOT BRASS
710060-[YY] LF AP760 Sleeve (2) AMC Free 1/2" - 5/8" C. HOT BRASS
710060-[YY] LF AP760 Sleeve (3) AMC Free 1/4" - 3/8" C. HOT BRASS
710061-[YY] LF AP761 Nut (2) AMC Free 1/2" - 5/8" C. HOT BRASS
710061-[YY] LF AP761 Nut (3) AMC Free 1/4" - 3/8" C. HOT BRASS
710062-[YY] LF AP762 Union AMC Free 1/4" - 5/8" C. HOT BRASS
710064-[YY] LF AP764 Tee AMC Free 1/4" - 5/8" C. HOT BRASS
710065-[YY] LF AP765 Elbow AMC Free 1/4" - 5/8" C. HOT BRASS
710066-[YYZZ] LF AP766 FE Coup AMC Free 1/4"x1/8"-5/8"x1/2" C. HOT BRASS
710068-[YYZZ] LF AP768 Connector AMC Free 3/16"x1/8"-5/8"x1/2" C. HOT BRASS
710069-[YYZZ] LF AP769 Elbow AMC Free 1/4"x1/8"-5/8"x1/2" C. HOT BRASS
710081-[YY] LF AP761CX Cap AMC Free 1/4" - 5/8" C. HOT BRASS
710082-[YYZZ] LF AP762R Union AMC Free 3/8"x1/4"-5/8"x1/2" C. HOT BRASS
714014-10 LF AP7441S Short Nut 5/8" C. HOT BRASS
714014-[YY] LF AP7441S Short Nut (2) AMC Free 1/4" - 1/2" C. HOT BRASS
714018-[YY] LF AP76401S Short FGD Nut AMC Free 3/8" - 5/8" C. HOT BRASS
714039-[YY] LF AP7439 Plug AMC Free 1/4" - 5/8" C. HOT BRASS
714040-[YY] LF AP7440 Cap AMC Free 1/4" - 5/8" C. HOT BRASS
714042-[YY] LF AP7402 Union AMC Free 1/4" - 5/8" C. HOT BRASS
714044-[YY] LF AP7404 Tee AMC Free 1/4" - 5/8" C. HOT BRASS
714046-[YYZZ] LF AP7406 FE Coup AMC Free 1/4"x1/4"-5/8"x3/4" C. HOT BRASS
714048-[YYZZ] LF AP7408 Half Union AMC Free 1/4"x1/8"-5/8"x3/4" C. HOT BRASS
714049-[YYZZ] LF AP7409 Elbow AMC Free 1/4"x1/8"-5/8"x3/4" C. HOT BRASS
714050-[YYZZ] LF AP7500 Elbow AMC Free 1/4"x1/4"-5/8"x3/4" C. HOT BRASS
714055-[YY] LF AP7505 Elbow AMC Free 3/8" - 5/8" C. HOT BRASS
714056-[YYZZ] LF AP7506 Union AMC Free 3/8"x1/4"-5/8"x1/2" C. HOT BRASS
717001-[0202] LF AP7129 Hose Barb AMC Free 1/8"x1/8" C. HOT BRASS
717002-[YYZZ] LF AP7129F Barb AMC Free 1/4"x1/8"-1/2"x1/2" C. HOT BRASS
717014-[YY] LF AP7129S Hose Splicer AMC Free 3/16" - 1/2" C. HOT BRASS
717480-[1208] LF AP780GH GH CONN AMC Free 3/4" x 1/2" C. HOT BRASS
717480-[1212] LF AP781GH GH CONN AMC Free 3/4" x 3/4" C. HOT BRASS
717484-[1208] LF AP784GH GH CONN AMC Free 3/4" x 12" C. HOT BRASS
717484-[121208] LF AP785GHT Tap AMC Free 3/4" x 3/4" x 1/2" C. HOT BRASS
730050-[YY] PLF 760 Sleeve (50) AMC FREE 1/4" - 5/8" C. HOT BRASS
730060-[12] PLF 760 Sleeve AMC Free 3/4" C. HOT BRASS
730060-[YY] PLF Sleeve (3) AMC Free 7/16" - 5/8" C. HOT BRASS
730060-[YY] PLF Sleeve (5) AMC Free 1/8" - 3/8" C. HOT BRASS
730061-07 PLF 761 7/16 NUT AMC FREE 1/8" - 7/8" C. HOT BRASS
730061-12 PLF 761 3/4 NUT AMC FREE 1/8" - 7/8" C. HOT BRASS
730061-[YY] PLF 761 Nut (2) AMC Free 1/2" - 5/8" C. HOT BRASS
730061-[YY] PLF 761 Nut (3) 1/8" - 3/8" C. HOT BRASS
730081-[YY] PLF 761CX Cap AMC Free 1/4" - 5/8" C. HOT BRASS
730661-06 PLF 761CP CP Nut (3) AMC Free 3/8" C. HOT BRASS
736112-[YY] PLF 7112 Close Nipple AMC Free 1/8" - 3/4" C. HOT BRASS
736113-[YYZZ] PLF 7113 Nipple AMC Free 1/8"x1½" - 3/8"x2½" C. HOT BRASS
737042-06 PLF 7329M/F 3/8 GH SET AMC FREE 3/8" - 3/4" C. HOT BRASS
737042-08 PLF 7329M/F 1/2 GH SET AMC FREE 3/8" - 3/4" C. HOT BRASS
737042-10 PLF 7329M/F 5/8 GH SET AMC FREE 3/8" - 3/4" C. HOT BRASS
737042-12 PLF 7329M/F 3/4 GH SET AMC FREE 3/8" - 3/4" C. HOT BRASS
737046-0612 PLF 7329F 3/8 X 3/4 GH BARB AMC FREE 3/8"x3/4"- 3/4"x3/4" C. HOT BRASS
737046-1212 PLF 7329F 3/4 X 3/4 GH BARB AMC FREE 3/8"x3/4"- 3/4"x3/4" C. HOT BRASS
737420-1204 PLF 7102GH 3/4 X 1/4 GH SWIVEL AMC FREE 3/4"x1/4"- 3/4"x1/2" C. HOT BRASS
737420-1206 PLF 7103GH 3/4 X 3/8 GH SWIVEL AMC FREE 3/4"x1/4"- 3/4"x1/2" C. HOT BRASS
737420-1208 PLF 7103GH 3/4 X 1/2 GH SWIVEL AMC FREE 3/4"x1/4"- 3/4"x1/2" C. HOT BRASS
750060-[14] FLF 760 Sleeve AMC Free 7/8" C. HOT BRASS
750061-[14] FLF 761 Nut AMC Free 7/8" C. HOT BRASS
750062-[YY] FLF 762 Union AMC Free 1/8" - 7/8" C. HOT BRASS
750064-02 FLF 764 1/8 TEE AMC FREE 1/8" - 7/8" C. HOT BRASS
750064-[YY] FLF 764 Tee AMC Free 1/8" - 7/8" C. HOT BRASS
750065-[YY] FLF 765 Elbow AMC Free 1/8" - 7/8" C. HOT BRASS
750066-0202 FLF 766 1/8 X 1/8 FE COUP AMC FREE 1/8"x1/8"-7/8"x3/4" C. HOT BRASS
750066-0502 FLF 766 5/16 X 1/8 FE COUP AMC FREE 1/8"x1/8"-7/8"x3/4" C. HOT BRASS
750066-0602 FLF 766 3/8 X 1/8 FE COUP AMC FREE 1/8"x1/8"-7/8"x3/4" C. HOT BRASS
750066-1006 FLF 766 5/8 X 3/8 FE COUP AMC FREE 1/8"x1/8"-7/8"x3/4" C. HOT BRASS
750066-1208 FLF 766 3/4 X 1/2 FE COUP AMC FREE 1/8"x1/8"-7/8"x3/4" C. HOT BRASS
750066-1212 FLF 766 3/4 X 3/4 FE COUP AMC FREE 1/8"x1/8"-7/8"x3/4" C. HOT BRASS
750066-[YYZZ] FLF 766 FE Coup AMC Free 3/16"x1/8"-7/8"x3/4" C. HOT BRASS
750068-0508 FLF 768 5/16 X 1/2 CONN AMC FREE 1/8"x1/8" - 7/8"x1" C. HOT BRASS
750068-0612 FLF 768 3/8 X 3/4 CONN AMC FREE 1/8"x1/8" - 7/8"x1" C. HOT BRASS
750068-0704 FLF 768 7/16 X 1/4 CONN AMC FREE 1/8"x1/8" - 7/8"x1" C. HOT BRASS
750068-0706 FLF 768 7/16 X 3/8 CONN AMC FREE 1/8"x1/8" - 7/8"x1" C. HOT BRASS
750068-1208 FLF 768 3/4 X 1/2 CONN AMC FREE 3/4" x 1/2" C. HOT BRASS
750068-[YYZZ] FLF 768 Connector AMC Free 1/8"x1/8"-7/8"x3/4" C. HOT BRASS
750069-0304 FLF 769 3/16 X 1/4 ELBOW AMC FREE 1/8"x1/8"-5/8"x3/4" C. HOT BRASS
750069-0506 FLF 769 5/16 X 3/8 ELBOW AMC FREE 1/8"x1/8"-5/8"x3/4" C. HOT BRASS
750069-0602 FLF 769 3/8 X 1/8 ELBOW AMC FREE 1/8"x1/8"-5/8"x3/4" C. HOT BRASS
750069-0804 FLF 769 1/2 X 1/4 ELBOW AMC FREE 1/8"x1/8"-5/8"x3/4" C. HOT BRASS
750069-0812 FLF 769 1/2 X 3/4 ELBOW AMC FREE 1/8"x1/8"-5/8"x3/4" C. HOT BRASS
750069-1208 FLF 769 3/4 X 1/2 ELBOW AMC FREE 1/8"x1/8"-5/8"x3/4" C. HOT BRASS
750069-1212 FLF 769 3/4 X 3/4 ELBOW AMC FREE 1/8"x1/8"-5/8"x3/4" C. HOT BRASS
750069-1412 FLF 769 7/8 X 3/4 ELBOW AMC FREE 1/8"x1/8"-5/8"x3/4" C. HOT BRASS
750069-[YYZZ] FLF 769 Elbow AMC Free 1/8"x1/8"-5/8"x3/4" C. HOT BRASS
750070-0202 FLF 770 1/8 X 1/8 FE ELBOW AMC FREE 1/8"x1/8"-3/4"x3/4" C. HOT BRASS
750070-0302 FLF 770 3/16 X 1/8 FE ELBOW AMC FREE 1/8"x1/8"-3/4"x3/4" C. HOT BRASS
750070-0402 FLF 770 1/4 X 1/8 FE ELBOW AMC FREE 1/8"x1/8"-3/4"x3/4" C. HOT BRASS
750070-0602 FLF 770 3/8 X 1/8 FE ELBOW AMC FREE 1/8"x1/8"-3/4"x3/4" C. HOT BRASS
750070-0604 FLF 770 3/8 X 1/4 FE ELBOW AMC FREE 1/8"x1/8"-3/4"x3/4" C. HOT BRASS
750070-0806 FLF 770 1/2 X 3/8 FE ELBOW AMC FREE 1/8"x1/8"-3/4"x3/4" C. HOT BRASS
750070-1008 FLF 770 5/8 X 1/2 FE ELBOW AMC FREE 1/8"x1/8"-3/4"x3/4" C. HOT BRASS
750070-[YYZZ] FLF 770 FE Elbow AMC Free 1/4"x1/4"-1/2"x1/2" C. HOT BRASS
750071-0302 FLF 771 3/16 X 1/8 TEE AMC FREE 1/8"x1/8"-3/4"x3/4" C. HOT BRASS
750071-0402 FLF 771 1/4 X 1/8 TEE AMC FREE 1/8"x1/8"-3/4"x3/4" C. HOT BRASS
750071-0404 FLF 771 1/4 X 1/4 TEE AMC FREE 1/8"x1/8"-3/4"x3/4" C. HOT BRASS
750071-0604 FLF 771 3/8 X 1/4 TEE AMC FREE 1/8"x1/8"-3/4"x3/4" C. HOT BRASS
750071-0606 FLF 771 3/8 X 3/8 TEE AMC FREE 1/8"x1/8"-3/4"x3/4" C. HOT BRASS
750072-0502 FLF 772 5/16 X 1/8 TEE AMC FREE 1/8"x1/8"-3/4"x3/4" C. HOT BRASS
750072-0504 FLF 772 5/16 X 1/4 TEE AMC FREE 1/8"x1/8"-3/4"x3/4" C. HOT BRASS
750072-[YYZZ] FLF 772 Tee AMC Free 1/4"x1/8"-5/8"x1/2" C. HOT BRASS
750078-0602 FLF 778 3/8 X 1/8 TEE AMC FREE 1/4"x1/8"-5/8"x1/8" C. HOT BRASS
750078-1002 FLF 778 5/8 X 1/8 TEE AMC FREE 1/4"x1/8"-5/8"x1/8" C. HOT BRASS
750082-0402 FLF 762R 1/4 X 1/8 UNION AMC FREE 1/4"x1/8"-5/8"x1/2" C. HOT BRASS
750082-0403 FLF 762R 1/4 X 3/16 UNION AMC FREE 1/4"x1/8"-5/8"x1/2" C. HOT BRASS
750082-0504 FLF 762R 5/16 X 1/4 UNION AMC FREE 1/4"x1/8"-5/8"x1/2" C. HOT BRASS
750082-0605 FLF 762R 3/8 X 5/16 UNION AMC FREE 1/4"x1/8"-5/8"x1/2" C. HOT BRASS
750082-[YYZZ] FLF 762R Union AMC Free 3/8"x1/4"-5/8"x1/2" C. HOT BRASS
750084-080806 FLF 764R 1/2 X 1/2 X 3/8 TEE AMC FREE [7] C. HOT BRASS
750084-101006 FLF 764R 5/8 X 5/8 X 3/8 TEE AMC FREE [7] C. HOT BRASS
750084-[YYZZXX] FLF 764R Tee AMC Free [5] C. HOT BRASS
750085-[YYZZ] FLF 765R Red Elbow AMC Free 5/8"x3/8"-5/8"x1/2" C. HOT BRASS
754014-[YY] FLF 74441S Short Nut AMC Free 1/4" - 3/4" C. HOT BRASS
754018-[YY] FLF 76401S Short FGD Nut AMC Free 1/4" - 3/4" C. HOT BRASS
754020-[YYZZ] FLF 76602S Red Nut AMC Free 3/8"x1/4"-5/8"x1/2" C. HOT BRASS
754039-[YY] FLF 7439 Plug AMC Free 1/4" - 5/8" C. HOT BRASS
754040-05 FLF 7440 5/16 CAP AMC FREE 3/16" - 3/4" C. HOT BRASS
754040-[YY] FLF 7440 Cap AMC Free 1/4" - 5/8" C. HOT BRASS
754042-[YY] FLF 7402 Union AMC Free 1/4" - 5/8" C. HOT BRASS
754044-[YY] FLF 7404 Tee AMC Free 1/4" - 5/8" C. HOT BRASS
754045-0402 FLF 7405 1/4 X 1/8 TEE AMC FREE 1/8"x1/8"-3/4"x3/4" C. HOT BRASS
754045-0404 FLF 7405 1/4 X 1/4 TEE AMC FREE 1/8"x1/8"-3/4"x3/4" C. HOT BRASS
754045-0406 FLF 7405 1/4 X 3/8 TEE AMC FREE 1/8"x1/8"-3/4"x3/4" C. HOT BRASS
754045-[YYZZ] FLF 7405 Tee AMC Free 3/8"x1/4"-5/8"x1/2" C. HOT BRASS
754046-0504 FLF 7406 5/16 X 1/4 FE COUP AMC FREE 1/8"x1/8"-7/8"x3/4" C. HOT BRASS
754046-1006 FLF 7406 5/8 X 3/8 FE COUP AMC FREE 1/8"x1/8"-7/8"x3/4" C. HOT BRASS
754046-[YYZZ] FLF 7406 FE Coup AMC Free 1/4"x1/8"-5/8"x3/4" C. HOT BRASS
754048-1208 FLF 7408 3/4 X 1/2 HALF UNION AMC FREE 1/8" x 1/8"- 1" x 1" C. HOT BRASS
754048-1212 FLF 7408 3/4 X 3/4 HALF UNION 1/8" x 1/8"- 1" x 1" C. HOT BRASS
754048-[YYZZ] FLF 7408 Half Union AMC Free 1/4"x1/8"-5/8"x3/4" C. HOT BRASS
754049-0302 FLF 7409 3/16 X 1/8 ELBOW AMC FREE 1/8" x 1/8"- 1" x 1" C. HOT BRASS
754049-1006 FLF 7409 5/8 X 3/8 ELBOW AMC FREE 1/8" x 1/8"- 1" x 1" C. HOT BRASS
754049-1208 FLF 7409 3/4 X 1/2 ELBOW AMC FREE 1/8" x 1/8"- 1" x 1" C. HOT BRASS
754049-1212 FLF 7409 3/4 X 3/4 ELBOW AMC FREE 1/8" x 1/8"- 1" x 1" C. HOT BRASS
754049-[YYZZ] FLF 7409 Elbow AMC Free 1/4"x1/8"-5/8"x3/4" C. HOT BRASS
754050-0402 FLF 7500 1/4 X 1/8 ELBOW AMC FREE 3/16"x1/8"-7/8"x3/4" C. HOT BRASS
754050-[YYZZ] FLF 7500 Elbow AMC Free 1/4"x1/4"-5/8"x3/4" C. HOT BRASS
754051-0404 FLF 7501 1/4 X 1/4 TEE AMC FREE 3/16"x1/8"-3/4"x3/4" C. HOT BRASS
754051-0606 FLF 7501 3/8 X 3/8 TEE AMC FREE 3/16"x1/8"-3/4"x3/4" C. HOT BRASS
754055-[YY] FLF 7505 Elbow AMC Free 1/4" - 5/8" C. HOT BRASS
754056-[YYZZ] FLF 7506 Red Union AMC Free 3/8"x1/4"-5/8"x1/2" C. HOT BRASS
754057-0806 FLF 7507 1/2 X 3/8 RED ELBOW AMC FREE 3/8"x1/4"-3/4"x5/8" C. HOT BRASS
754059-[YYZZXX] FLF 7509 Tee AMC Free [6] C. HOT BRASS
756100-08 FLF 7100 1/2 ELBOW AMC FREE 1/8" - 3/4" C. HOT BRASS
756100-12 FLF 7100 3/4 ELBOW AMC FREE 1/8" - 3/4" C. HOT BRASS
756100-[YY] FLF 7100 Elbow AMC Free 1/8" - 3/8" C. HOT BRASS
756101-08 FLF 7101 1/2 TEE AMC FREE 1/8" - 3/4" C. HOT BRASS
756101-12 FLF 7101 3/4 TEE AMC FREE 1/8" - 3/4" C. HOT BRASS
756101-[YY] FLF 7101 Tee AMC Free 1/8" - 3/8" C. HOT BRASS
756102-02 FLF 7102 1/8 CROSS AMC FREE 1/8" - 3/4" C. HOT BRASS
756102-04 FLF 7102 1/4 CROSS AMC FREE 1/8" - 3/4" C. HOT BRASS
756102-06 FLF 7102 3/8 CROSS AMC FREE 1/8" - 3/4" C. HOT BRASS
756102-08 FLF 7102 1/2 CROSS AMC FREE 1/8" - 3/4" C. HOT BRASS
756102-12 FLF 7102 3/4 CROSS AMC FREE 1/8" - 3/4" C. HOT BRASS
756103-[YY] FLF 7103 Coupling AMC Free 1/8" - 3/4" C. HOT BRASS
756107-04 FLF 710045 1/4 45 ELBOW AMC FREE 1/8" - 1/4" C. HOT BRASS
756107-[02] FLF 710045 45 Elbow AMC Free 1/8" C. HOT BRASS
756108-12 FLF 7108 3/4 CAP AMC FREE 1/8" - 3/4" C. HOT BRASS
756108-[YY] FLF 7108 Cap AMC Free 1/8" - 1/2" C. HOT BRASS
756109-12 FLF 7109 3/4 PIPE PLUG AMC FREE 1/8" - 1" C. HOT BRASS
756109-[YY] FLF 7109 Pipe Plug AMC Free 1/8" - 1/2" C. HOT BRASS
756110-1604 FLF 7110 1 X 1/4 HEX BUSHING AMC FREE 1/4"x1/8" -1"x3/4" C. HOT BRASS
756110-1606 FLF 7110 1 X 3/8 HEX BUSHING AMC FREE 1/4"x1/8" -1"x3/4" C. HOT BRASS
756110-1608 FLF 7110 1 X 1/2 HEX BUSHING AMC FREE 1/4"x1/8" -1"x3/4" C. HOT BRASS
756110-1612 FLF 7110 1 X 3/4 HEX BUSHING AMC FREE 1/4"x1/8" -1"x3/4" C. HOT BRASS
756110-[YYZZ] FLF 7110 Hex Bushing AMC Free 1/4"x1/8"-3/4"x1/2" C. HOT BRASS
756114-02 FLF 7109S 1/8 SQ HD SOLID PLUG AMC FREE 1/8" - 1" C. HOT BRASS
756114-04 FLF 7109S 1/4 SQ HD SOLID PLUG AMC FREE 1/8" - 1" C. HOT BRASS
756114-06 FLF 7109S 3/8 SQ HD SOLID PLUG AMC FREE 1/8" - 1" C. HOT BRASS
756116-08 FLF 7116 1/2 STREET ELBOW AMC FREE 1/8" - 3/4" C. HOT BRASS
756116-12 FLF 7116 3/4 STREET ELBOW AMC FREE 1/8" - 3/4" C. HOT BRASS
756116-[YY] FLF 7116 Street Elbow AMC Free 1/8" - 3/8" C. HOT BRASS
756119-1208 FLF 7119 3/4 X 1/2 RED COUP AMC FREE 1/4"x1/8"-3/4"x1/2" C. HOT BRASS
756119-[YYZZ] FLF 7119 Red Coupling AMC Free 1/4"x1/8"-1/2"x3/8" C. HOT BRASS
756120-0602 FLF 7120 3/8 X 1/8 ADAPTER AMC FREE 1/8"x1/8"-3/4"x3/4" C. HOT BRASS
756120-0804 FLF 7120 1/2 X 1/4 ADAPTER AMC FREE 1/8"x1/8"-3/4"x3/4" C. HOT BRASS
756120-[YYZZ] FLF 7120 Adapter AMC Free 1/4"x1/8"-1/2"x1/2" C. HOT BRASS
756121-12 FLF 7121 3/4 HEX HEAD PLUG AMC FREE 1/8" - 1" C. HOT BRASS
756121-[YY] FLF 7121 Hex Head Plug AMC Free 1/8" - 1/2" C. HOT BRASS
756122-16 FLF 7122 1 HEX NIPPLE AMC FREE 1/8" - 1" C. HOT BRASS
756122-[YY] FLF 7122 Hex Nipple AMC Free 1/8" - 3/4" C. HOT BRASS
756123-0602 FLF 7123 3/8 X 1/8 RED NIPPLE AMC FREE 1/4"x1/8"-3/4"x1/2" C. HOT BRASS
756123-[YYZZ] FLF 7123 Red Nipple AMC Free 1/4"x1/8"-3/4"x1/2" C. HOT BRASS
756130-02 FLF 7130 1/8 ELBOW AMC FREE 1/8" - 3/8" C. HOT BRASS
756130-04 FLF 7130 1/4 ELBOW AMC FREE 1/8" - 3/8" C. HOT BRASS
756130-06 FLF 7130 3/8 ELBOW AMC FREE 1/8" - 3/8" C. HOT BRASS
756201-02 FLF 7101F 1/8 FGD TEE AMC FREE 1/8" - 3/4" C. HOT BRASS
756201-04 FLF 7101F 1/4 FGD TEE AMC FREE 1/8" - 3/4" C. HOT BRASS
756201-06 FLF 7101F 3/8 FGD TEE AMC FREE 1/8" - 3/4" C. HOT BRASS
756201-08 FLF 7101F 1/2 FGD TEE AMC FREE 1/8" - 3/4" C. HOT BRASS
756201-12 FLF 7101F 3/4 FGD TEE AMC FREE 1/8" - 3/4" C. HOT BRASS
756235-0402 FLF 7130R 1/4 X 1/8 RED ELBOW AMC FREE 1/4"x1/8"-1/2"x3/8" C. HOT BRASS
756235-0602 FLF 7130R 3/8 X 1/8 RED ELBOW AMC FREE 1/4"x1/8"-1/2"x3/8" C. HOT BRASS
756235-0604 FLF 7130R 3/8 X 1/4 RED ELBOW AMC FREE 1/4"x1/8"-1/2"x3/8" C. HOT BRASS
756235-0806 FLF 7130R 1/2 X 3/8 RED ELBOW AMC FREE 1/4"x1/8"-1/2"x3/8" C. HOT BRASS
757001-[0202] FLF 7129 Hose Barb AMC Free 1/8" x 1/8" C. HOT BRASS
757002-[YYZZ] FLF 7129F Hose Barb AMC Free 3/8"x1/8"-1/2"x1/2" C. HOT BRASS
757014-[YY] FLF 7129S Hose Splicer AMC Free 3/16" - 5/8" C. HOT BRASS
757048-0612 FLF 7329M 3/8 X 3/4 GH BARB AMC FREE 1/4"x1/8"-1/2"x3/8" C. HOT BRASS
757048-0812 FLF 7329M 1/2 X 3/4 GH BARB AMC FREE 1/4"x1/8"-1/2"x3/8" C. HOT BRASS
757048-1012 FLF 7329M 5/8 X 3/4 GH BARB AMC FREE 1/4"x1/8"-1/2"x3/8" C. HOT BRASS
757048-1212 FLF 7329M 3/4 X 3/4 GH BARB AMC FREE 1/4"x1/8"-1/2"x3/8" C. HOT BRASS
757480-[1208] FLF 780EV GH CONN AMC Free 3/4" x 1/2" C. HOT BRASS
757480-[1212] FLF 781EV GH CONN AMC Free 3/4" x 3/4" C. HOT BRASS
757482-[1208] FLF 782EV GH CONN AMC Free 3/4" x 1/2" C. HOT BRASS
757482-[1212] FLF 783EV GH CONN AMC Free 3/4" x 3/4" C. HOT BRASS
757484-[1208] FLF 784EV GH CONN AMC Free 3/4" x 1/2" C. HOT BRASS
757484-[121208] FLF 785EVT Tap AMC Free 3/4" x 3/4" x 1/2" C. HOT BRASS

[1] XX, YY, and ZZ suffixes indicate size (in inches):
    02 - 1/8"
    03 - 3/16"
    04 - 1/4"
    05 - 5/16"
    06 - 3/8"
    07 - 7/16"
    08 - 1/2"
    10 - 5/8"
    12 - 3/4"
    14 - 7/8"
    16 - 1"
[3] Size - 1/4" x 1/4" x 1/8" - 5/8" x 5/8" x 3/8"
[4] Size - 1/4" x 1/4" x 3/8" - 5/8" x 5/8" x 1/2"
[5] Size - 1/4" x 1/4" x 1/8" - 3/8" x 3/8" x 1/4"
[6] Size - 3/8" x 3/8" x 1/2" - 5/8" x 5/8" x 1/2"
[7] Size - 1/4" x 1/4" x 1/8" - 5/8" x 5/8" x 1/2"
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[2] Size - 1/4" x 1/8" x 1/8" - 1/4" x 1/4" x 1/4"


 
Anderson Metals Corporation, Inc. 
1701 Southern Road
P.O. Box 34200 
Kansas City, MO 64120 
United States 
816-471-2600

Facility : #9902

Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings[G]
700060-02, 1/8" OD Sleeve 1/8" D. HOT MLTPL
700060-03, 3/16" OD Sleeve 3/16" D. HOT MLTPL
700060-04, 1/4" OD Sleeve 1/4" D. HOT MLTPL
700060-05, 5/16" OD Sleeve 5/16" D. HOT MLTPL
700060-06, 3/8" OD Sleeve 3/8" D. HOT MLTPL
700060-07, 7/16" OD Sleeve 7/16" D. HOT MLTPL
700060-08, 1/2" OD Sleeve 1/2" D. HOT MLTPL
700060-10, 5/8" OD Sleeve 5/8" D. HOT MLTPL
700060-12, 3/4" OD Sleeve 3/4" D. HOT MLTPL
700060-14, 7/8" OD Sleeve 7/8" D. HOT MLTPL
700061-02, 1/8" OD Nut 1/8" D. HOT MLTPL
700061-03, 3/16" OD Nut 3/16" D. HOT MLTPL
700061-04, 1/4" OD Nut 1/4" D. HOT MLTPL
700061-05, 5/16" OD Nut 5/16" D. HOT MLTPL
700061-06, 3/8" OD Nut 3/8" D. HOT MLTPL
700061-07, 7/16" OD Nut 7/16" D. HOT MLTPL
700061-08, 1/2" OD Nut 1/2" D. HOT MLTPL
700061-10, 5/8" OD Nut 5/8" D. HOT MLTPL
700061-12, 3/4" OD Nut 3/4" D. HOT MLTPL
700061-14, 7/8" OD Nut 7/8" D. HOT MLTPL
700062-02, 1/8" Comp Union 1/8" D. HOT MLTPL
700062-03, 3/16" Comp Union 3/16" D. HOT MLTPL
700062-04, 1/4" Comp Union 1/4" D. HOT MLTPL
700062-05, 5/16" Comp Union 5/16" D. HOT MLTPL
700062-06, 3/8" Comp Union 3/8" D. HOT MLTPL
700062-08, 1/2" Comp Union 1/2" D. HOT MLTPL
700062-10, 5/8" Comp Union 5/8" D. HOT MLTPL
700062-12, 3/4" Comp Union 3/4" D. HOT MLTPL
700062-14, 7/8" Comp Union 7/8" D. HOT MLTPL
700064-02, 1/8" OD Tee Barstock 1/8" D. HOT MLTPL
700064-03, 3/16" OD Tee Barstock 3/16" D. HOT MLTPL
700064-04, 1/4" OD Tee Barstock 1/4" D. HOT MLTPL
700064-05, 5/16" OD Tee Forged 5/16" D. HOT MLTPL
700064-06, 3/8" OD Tee Barstock 3/8" D. HOT MLTPL
700064-08, 1/2" OD Tee Forged 1/2" D. HOT MLTPL
700064-10, 5/8" OD Tee Forged 5/8" D. HOT MLTPL
700065-04, 1/4" OD*1/4" OD 90° Barstock 1/4" D. HOT MLTPL
700065-05, 5/16" OD*5/16" OD 90° Barstock 5/16" D. HOT MLTPL
700065-06, 3/8" OD*3/8" OD 90° Barstock 3/8" D. HOT MLTPL
700065-08, 1/2" OD*1/2" OD 90° Forged 1/2" D. HOT MLTPL
700065-10, 5/8" OD*5/8" OD 90° Forged 5/8" D. HOT MLTPL
700066-0202, 1/8" OD*1/8" NPTF 1/8" x 1/8" D. HOT MLTPL
700066-0302, 3/16" OD*1/8" NPTF 3/16" x 1/8" D. HOT MLTPL
700066-0402, 1/4" OD*1/8" NPTF 1/4" x 1/8" D. HOT MLTPL
700066-0404, 1/4" OD*1/4" NPTF 1/4" x 1/4" D. HOT MLTPL
700066-0406, 1/4" OD*3/8" NPTF 1/4" x 3/8" D. HOT MLTPL
700066-0408, 1/4" OD*1/2" NPTF 1/4" x 1/2" D. HOT MLTPL
700066-0502, 5/16" OD*1/8" NPTF 5/16" x 1/8" D. HOT MLTPL
700066-0504, 5/16" OD*1/4" NPTF 5/16" x 1/4" D. HOT MLTPL
700066-0602, 3/8" OD*1/8" NPTF 3/8" x 1/8" D. HOT MLTPL
700066-0604, 3/8" OD*1/4" NPTF 3/8" x 1/4" D. HOT MLTPL
700066-0606, 3/8" OD*3/8" NPTF 3/8" x 3/8" D. HOT MLTPL
700066-0608, 3/8" OD*1/2" NPTF 3/8" x 1/2" D. HOT MLTPL
700066-0806, 1/2" OD*3/8" NPTF 1/2" x 3/8" D. HOT MLTPL
700066-0808, 1/2" OD*1/2" NPTF 1/2" x 1/2" D. HOT MLTPL
700066-1006, 5/8" OD*3/8" NPTF 5/8" x 3/8" D. HOT MLTPL
700066-1008, 5/8" OD*1/2" NPTF 5/8" x 1/2" D. HOT MLTPL
700066-1012, 5/8" OD*3/4" NPTF 5/8" x 3/4" D. HOT MLTPL
700066-1208, 3/4" OD*1/2" NPTF 3/4" x 1/2" D. HOT MLTPL
700066-1212, 3/4" OD*3/4" NPTF 3/4" x 3/4" D. HOT MLTPL
700066-1408, 7/8" OD*1/2" NPTF 7/8" x 1/2" D. HOT MLTPL
700066-1412, 7/8" OD*3/4" NPTF 7/8" x 3/4" D. HOT MLTPL
700068-0202, 1/8" OD*1/8" NPTF 1/8" x 1/8" D. HOT MLTPL
700068-0302, 3/16" OD*1/8" NPTF 3/16" x 1/8" D. HOT MLTPL
700068-0304, 3/16" OD*1/4" NPTF 3/16" x 1/4" D. HOT MLTPL
700068-0402 , 1/4" OD*1/8" NPTF 1/4" x 1/8" D. HOT MLTPL
700068-0404, 1/4" OD*1/4"NPTF 1/4" x 1/4" D. HOT MLTPL
700068-0406, 1/4" OD*3/8"NPTF 1/4" x 3/8" D. HOT MLTPL
700068-0408, 1/4" OD*1/2" NPTF 1/4" x 1/2" D. HOT MLTPL
700068-0502, 5/16"OD*1/8" NPTF 5/16" x 1/8" D. HOT MLTPL
700068-0504, 5/16" OD*1/4" NPTF 5/16" x 1/4" D. HOT MLTPL
700068-0506, 5/16" OD*3/8" NPTF 5/16" x 3/8" D. HOT MLTPL
700068-0508, 5/16" OD*1/2" NPTF 5/16" x 1/2" D. HOT MLTPL
700068-0602, 3/8" OD*1/8" NPTF 3/8" x 1/8" D. HOT MLTPL
700068-0604, 3/8" OD*1/4" NPTF 3/8" x 1/4" D. HOT MLTPL
700068-0606, 3/8" OD*3/8" NPTF 3/8" x 3/8" D. HOT MLTPL
700068-0608, 3/8" OD*1/2" NPTF 3/8" x 1/2" D. HOT MLTPL
700068-0612, 3/8" OD*3/4" NPTF 3/8" x 3/4" D. HOT MLTPL
700068-0704, 7/16" OD*1/4" NPTF 7/16" x 1/4" D. HOT MLTPL
700068-0706, 7/16" OD*3/8" NPTF 7/16" x 3/8" D. HOT MLTPL
700068-0804, 1/2" OD*1/4" NPTF 1/2" x 1/4" D. HOT MLTPL
700068-0806, 1/2" OD*3/8" NPTF 1/2" x 3/8" D. HOT MLTPL
700068-0808, 1/2" OD*1/2" NPTF 1/2" x 1/2" D. HOT MLTPL
700068-0812, 1/2" OD*3/4" NPTF 1/2" x 3/4" D. HOT MLTPL
700068-1006, 5/8" OD*3/8" NPTF 5/8" x 3/8" D. HOT MLTPL
700068-1008, 5/8" OD*1/2" NPTF 5/8" x 1/2" D. HOT MLTPL
700068-1208, 3/4" OD*1/2" NPTF 3/4" x 1/2" D. HOT MLTPL
700068-1408, 7/8" OD*1/2" NPTF 7/8" x 1/2" D. HOT MLTPL
700068-1412, 7/8" OD*3/4" NPTF 7/8" x 3/4" D. HOT MLTPL
700069-0202, 1/8" OD*1/8" NPTF 90° Barstock 1/8" x 1/8" D. HOT MLTPL
700069-0302, 3/16" OD*1/8" NPTF 90° Barstock 3/16" x 1/8" D. HOT MLTPL
700069-0304, 3/16" OD*1/4" NPTF 90° Forged 3/16" x 1/4" D. HOT MLTPL
700069-0402, 1/4" OD*1/8" NPTF 90° Barstock 1/4" x 1/8" D. HOT MLTPL
700069-0404, 1/4" OD*1/4" NPTF 90° Barstock 1/4" x 1/4" D. HOT MLTPL
700069-0406, 1/4" OD*3/8" NPTF 90° Forged 1/4" x 3/8" D. HOT MLTPL
700069-0408, 1/4" OD*1/2" NPTF 90° Forged 1/4" x 1/2" D. HOT MLTPL
700069-0502, 5/16" OD*1/8" NPTF 90° Barstock 5/16" x 1/8" D. HOT MLTPL
700069-0504, 5/16" OD*1/4" NPTF 90° Barstock 5/16" x 1/4" D. HOT MLTPL
700069-0602, 3/8" OD*1/8" NPTF 90° Barstock 3/8" x 1/8" D. HOT MLTPL
700069-0604, 3/8" OD*1/4" NPTF 90° Barstock 3/8" x 1/4" D. HOT MLTPL
700069-0606, 3/8" OD*3/8" NPTF 90° Forged 3/8" x 3/8" D. HOT MLTPL
700069-0608, 3/8" OD*1/2" NPTF 90° Forged 3/8" x 1/2" D. HOT MLTPL
700069-0804, 1/2" OD*1/4" NPTF 90° Barstock 1/2" x 1/4" D. HOT MLTPL
700069-0806, 1/2" OD*3/8" NPTF 90° Forged 1/2" x 3/8" D. HOT MLTPL
700069-0808, 1/2" OD*1/2" NPTF 90° Forged 1/2" x 1/2" D. HOT MLTPL
700069-0812, 1/2" OD*3/4" NPTF 90° Forged 1/2" x 3/4" D. HOT MLTPL
700069-1008, 5/8" OD*1/2" NPTF 90° Forged 5/8" x 1/2" D. HOT MLTPL
700069-1208, 3/4" OD*1/2" NPTF 90° Forged 3/4" x 1/2" D. HOT MLTPL
700069-1212, 3/4" OD*3/4" NPTF 90° Forged 3/4" x 3/4" D. HOT MLTPL
700070-0202, 1/8" OD*1/8" NPTF 90° Barstock 1/8" x 1/8" D. HOT MLTPL
700070-0402, 1/4" OD*1/8" NPTF 90° Barstock 1/4" x 1/8" D. HOT MLTPL
700070-0404, 1/4" OD*1/4" NPTF 90° Forged 1/4" x 1/4" D. HOT MLTPL
700070-0602, 3/8" OD*1/8" NPTF 90° Forged 3/8" x 1/8" D. HOT MLTPL
700070-0604, 3/8" OD*1/4" NPTF 90° Forged 3/8" x 1/4" D. HOT MLTPL
700070-0608, 3/8" OD*1/2" NPTF 90° Forged 3/8" x 1/2" D. HOT MLTPL
700070-0806, 1/2" OD*3/8" NPTF 90° Forged 1/2" x 3/8" D. HOT MLTPL
700070-1008, 5/8" OD*1/2" NPTF 90° Forged 5/8" x 1/2" D. HOT MLTPL
700071-0302, 3/16" OD*3/16" OD*1/8" NPTF Forged 3/16" x 1/8" D. HOT MLTPL
700071-0402, 1/4" OD*1/4" OD*1/8" NPTF Forged 1/4" x 1/8" D. HOT MLTPL
700071-0404, 1/4" OD*1/4" OD*1/4" NPTF Forged 1/4" x 1/4" D. HOT MLTPL
700072-0402, 1/4" OD*1/8" NPTF*1/4" OD Forged 1/4" x 1/8" D. HOT MLTPL
700072-0404, 1/4" OD*1/4" NPTF*1/4" OD Forged 1/4" x 1/4" D. HOT MLTPL
700072-0502, 5/16" OD*1/8" NPTF*5/16" OD Barstock 5/16" x 1/8" D. HOT MLTPL
700072-0504, 5/16" OD*1/4" NPTF*5/16" OD Forged 5/16" x 1/4" D. HOT MLTPL
700072-0604, 3/8" OD*1/4" NPTF*3/8" OD Forged 3/8" x 1/4" D. HOT MLTPL
700072-0606, 3/8" OD*3/8" NPTF*3/8" OD Forged 3/8" x 3/8" D. HOT MLTPL
700081-04 , 1/4" Cap Nut 1/4" D. HOT MLTPL
700081-06, 3/8" Cap Nut 3/8" D. HOT MLTPL
700081-08, 1/2" Cap Nut 1/2" D. HOT MLTPL
700081-10, 5/8" Cap Nut 5/8" D. HOT MLTPL
700082-0402, 1/4" OD*1/8" OD Union 1/4" x 1/8" D. HOT MLTPL
700082-0403, 1/4" OD*3/16" OD Union 1/4" x 3/16" D. HOT MLTPL
700082-0504, 5/16" OD*1/4" OD Union 5/16" x 1/4" D. HOT MLTPL
700082-0604, 3/8" OD*1/4" OD Union 3/8" x 1/4" D. HOT MLTPL
700082-0605, 3/8" OD*5/16" OD Union 3/8" x 5/16" D. HOT MLTPL
700082-0806, 1/2" OD*3/8" OD Union 1/2" x 3/8" D. HOT MLTPL
700082-1006, 5/8" OD*3/8" OD Union 5/8" x 3/8" D. HOT MLTPL
700082-1008, 5/8" OD*1/2" OD Union 5/8" x 1/2" D. HOT MLTPL
700084-060604, 3/8" OD*3/8" OD*1/4" OD Forged 3/8" x 3/8" x 1/4" D. HOT MLTPL
700084-080806, 1/2" OD*1/2" OD*3/8" OD Forged 1/2" x 1/2" x 3/8" D. HOT MLTPL
700084-101006, 5/8" OD*5/8" OD*3/8" OD Forged 5/8" x 5/8" x 3/8" D. HOT MLTPL
700086-0610, 3/8" OD*5/8" Copper 3/8" x 5/8" D. HOT MLTPL
700097-0604, 3/8" Female Comp*1/4" Comp 3/8" D. HOT MLTPL
700261-02, 1/8" Nut 1/8" D. HOT MLTPL
700261-03, 3/16" Nut 3/16" D. HOT MLTPL
700261-04, 1/4" Nut 1/4" D. HOT MLTPL
700261-05, 5/16" Nut 5/16" D. HOT MLTPL
700261-06, 3/8" Nut 3/8" D. HOT MLTPL
700261-08, 1/2" Nut 1/2" D. HOT MLTPL
700261-10, 5/8" Nut 5/8" D. HOT MLTPL
700261-12, 3/4" Nut 3/4" D. HOT MLTPL
700261-14, 7/8" Nut 7/8" D. HOT MLTPL
700561-04, 1/4" Insert 1/4" D. HOT MLTPL
700561-06, 3/8" Insert 3/8" D. HOT MLTPL
700561-08, 1/2" Insert 1/2" D. HOT MLTPL
700561-10, 5/8" Insert 5/8" D. HOT MLTPL
704014-04, 1/4" Flare Nut 1/4" D. HOT MLTPL
704014-05, 5/16" Flare Nut 5/16" D. HOT MLTPL
704014-06, 3/8" Flare Nut 3/8" D. HOT MLTPL
704014-08, 1/2" Flare Nut 1/2" D. HOT MLTPL
704014-10, 5/8" Flare Nut 5/8" D. HOT MLTPL
704018-04, 1/4" Flare Nut Forged 1/4" D. HOT MLTPL
704018-06, 3/8" Flare Nut Forged 3/8" D. HOT MLTPL
704018-08, 1/2" Flare Nut Forged 1/2" D. HOT MLTPL
704018-10, 5/8" Flare Nut Forged 5/8" D. HOT MLTPL
704018-12, 3/4" Flare Nut Forged 3/4" D. HOT MLTPL
704039-04, 1/4" Flare Plug 1/4" D. HOT MLTPL
704039-06, 3/8" Flare Plug 3/8" D. HOT MLTPL
704039-08, 1/2" Flare Plug 1/2" D. HOT MLTPL
704039-10, 5/8" Flare Plug 5/8" D. HOT MLTPL
704040-04, 1/4" Flare Cap 1/4" D. HOT MLTPL
704040-06, 3/8" Flare Cap 3/8" D. HOT MLTPL
704040-08, 1/2" Flare Cap 1/2" D. HOT MLTPL
704040-10, 5/8" Flare Cap 5/8" D. HOT MLTPL
704042-04, 1/4" Flare Union 1/4" D. HOT MLTPL
704042-05, 5/16" Flare Union 5/16" D. HOT MLTPL
704042-06, , 3/8" Flare Union 3/8" D. HOT MLTPL
704042-08, 1/2" Flare Union 1/2" D. HOT MLTPL
704042-10, 5/8" Flare Union 5/8" D. HOT MLTPL
704042-12, 3/4" Flare Union 3/4" D. HOT MLTPL
704044-04, 1/4" Flare Tee Barstock 1/4" D. HOT MLTPL
704044-05, 5/16" Flare Tee Forged 5/16" D. HOT MLTPL
704044-06, 3/8" Flare Tee Forged 3/8" D. HOT MLTPL
704044-08, 1/2" Flare Tee Forged 1/2" D. HOT MLTPL
704044-10, 5/8" Flare Tee Forged 5/8" D. HOT MLTPL
704045-0402, 1/4" Flare*1/4" Flare*1/8" NTPF Forged 1/4" x 1/8" D. HOT MLTPL
704045-0404, 1/4" Flare*1/4" Flare*1/4" NTPF Forged 1/4" x 1/4" D. HOT MLTPL
704045-0604, 3/8" Flare*3/8" Flare*1/4" NTPF Forged 3/8" x 1/4" D. HOT MLTPL
704045-0606, 3/8" Flare*3/8" Flare*3/8" NTPF Forged 3/8" x 3/8" D. HOT MLTPL
704045-0808, 1/2" Flare*1/2" Flare*1/2" NTPF Forged 1/2" x 1/2" D. HOT MLTPL
704046-0402, 1/4" Flare*1/8" NPTF 1/4" x 1/8" D. HOT MLTPL
704046-0404, 1/4" Flare*1/4" NPTF 1/4" x 1/4" D. HOT MLTPL
704046-0502, 5/16" Flare*1/8" NPTF 5/16" x 1/8" D. HOT MLTPL
704046-0504, 5/16" Flare*1/4" NPTF 5/16" x 1/4" D. HOT MLTPL
704046-0604, 3/8" Flare*1/4" NPTF 3/8" x 1/4" D. HOT MLTPL
704046-0606, 3/8" Flare*3/8" NPTF 3/8" x 3/8" D. HOT MLTPL
704046-0608, 3/8" Flare*1/2" NPTF 3/8" x 1/2" D. HOT MLTPL
704046-0612, 3/8" Flare*3/4" NPTF 3/8" x 3/4" D. HOT MLTPL
704046-0806, 1/2" Flare*3/8" NPTF 1/2" x 3/8" D. HOT MLTPL
704046-0808, 1/2" Flare*1/2" NPTF 1/2" x 1/2" D. HOT MLTPL
704046-0812, 1/2" Flare*3/4" NPTF 1/2" x 3/4" D. HOT MLTPL
704046-1012, 5/8" Flare*3/4" NPTF 5/8" x 3/4" D. HOT MLTPL
704048-0202, 1/8" Flare*1/8" NPTF 1/8" x 1/8" D. HOT MLTPL
704048-0302, 3/16" Flare*1/8" NPTF 3/16" x 1/8" D. HOT MLTPL
704048-0304, 3/16" Flare*1/4" NPTF 3/16" x 1/4" D. HOT MLTPL
704048-0402, 1/4" Flare*1/8" NPTF 1/4" x 1/8" D. HOT MLTPL
704048-0404, 1/4" Flare*1/4" NPTF 1/4" x 1/4" D. HOT MLTPL
704048-0406, 1/4" Flare*3/8" NPTF 1/4" x 3/8" D. HOT MLTPL
704048-0408, 1/4" Flare*1/2" NPTF 1/4" x 1/2" D. HOT MLTPL
704048-0502, 5/16" Flare*1/8" NPTF 5/16" x 1/8" D. HOT MLTPL
704048-0504, 5/16" Flare*1/4" NPTFv 5/16" x 1/4" D. HOT MLTPL
704048-0602, 3/8" Flare*1/8" NPTF 3/8" x 1/8" D. HOT MLTPL
704048-0604, 3/8" Flare*1/4" NPTF 3/8" x 1/4" D. HOT MLTPL
704048-0606, 3/8" Flare*3/8" NPTF 3/8" x 3/8" D. HOT MLTPL
704048-0608, 3/8" Flare*1/2" NPTF 3/8" x 1/2" D. HOT MLTPL
704048-0612, 3/8" Flare*3/4" NPTF 3/8" x 3/4" D. HOT MLTPL
704048-0804, 1/2" Flare*1/4" NPTF 1/2" x 1/4" D. HOT MLTPL
704048-0806, 1/2" Flare*3/8" NPTF 1/2" x 3/8" D. HOT MLTPL
704048-0808, 1/2" Flare*1/2" NPTF 1/2" x 1/2" D. HOT MLTPL
704048-0812, 1/2" Flare*3/4" NPTF 1/2" x 3/4" D. HOT MLTPL
704048-1006, 5/8" Flare*3/8" NPTF 5/8" x 3/8" D. HOT MLTPL
704048-1008, 5/8" Flare*1/2" NPTF 5/8" x 1/2" D. HOT MLTPL
704048-1012, 5/8" Flare*3/4" NPTF 5/8" x 3/4" D. HOT MLTPL
704048-1208, 3/4" Flare*1/2" NPTF 3/4" x 1/2" D. HOT MLTPL
704048-1212, 3/4" Flare*3/4" NPTF 3/4" x 3/4" D. HOT MLTPL
704048-1412, 7/8" Flare*3/4" NPTF 7/8" x 3/4" D. HOT MLTPL
704049-0302, 3/16" Flare*1/8" NPTF 90° Barstock 3/16" x 1/8" D. HOT MLTPL
704049-0402, 1/4" Flare*1/8" NPTF 90° Barstock 1/4" x 1/8" D. HOT MLTPL
704049-0404, 1/4" Flare*1/4" NPTF 90° Barstock 1/4" x 1/4" D. HOT MLTPL
704049-0406, 1/4" Flare*3/8" NPTF 90° Forged 1/4" x 3/8" D. HOT MLTPL
704049-0408, 1/4" Flare*1/2" NPTF 90° Forged 1/4" x 1/2" D. HOT MLTPL
704049-0502, 5/16" Flare*1/8" NPTF 90° Forged 5/16" x 1/8" D. HOT MLTPL
704049-0502B, 5/16" Flare*1/8" NPTF 90° Barstock 5/16" x 1/8" D. HOT MLTPL
704049-0602, 3/8" Flare*1/8" NPTF 90° Barstock 3/8" x 1/8" D. HOT MLTPL
704049-0604, 3/8" Flare*1/4" NPTF 90° Forged 3/8" x 1/4" D. HOT MLTPL
704049-0606, 3/8" Flare*3/8" NPTF 90° Barstock 3/8" x 3/8" D. HOT MLTPL
704049-0608, 3/8" Flare*1/2" NPTF 90° Forged 3/8" x 1/2" D. HOT MLTPL
704049-0804, 1/2" Flare*1/4" NPTF 90° Barstock 1/2" x 1/4" D. HOT MLTPL
704049-0806, 1/2" Flare*3/8" NPTF 90° Barstock 1/2" x 3/8" D. HOT MLTPL
704049-0808, 1/2" Flare*1/2" NPTF 90° Forged 1/2" x 1/2" D. HOT MLTPL
704049-0808B, 1/2" Flare*1/2" NPTF 90° Barstock 1/2" x 1/2" D. HOT MLTPL
704049-0812, 1/2" Flare*3/4" NPTF 90° Forged 1/2" x 3/4" D. HOT MLTPL
704049-1008, 5/8" Flare*1/2" NPTF 90° Forged 5/8" x 1/2" D. HOT MLTPL
704049-1012, 5/8" Flare*3/4" NPTF 90° Forged 5/8" x 3/4" D. HOT MLTPL
704049-1208, 3/4" Flare*1/2" NPTF 90° Forged 3/4" x 1/2" D. HOT MLTPL
704049-1212, 3/4" Flare*3/4" NPTF 90° Barstock 3/4" x 3/4" D. HOT MLTPL
704050-0402, 1/4" Flare*1/8" NPTF 90° Forged 1/4" x 1/8" D. HOT MLTPL
704050-0404, 1/4" Flare*1/4" NPTF 90° Forged 1/4" x 1/4" D. HOT MLTPL
704050-0606, 3/8" Flare*3/8" NPTF 90° Forged 3/8" x 3/8" D. HOT MLTPL
704050-0608, 3/8" Flare*1/2" NPTF 90° Forged 3/8" x 1/2" D. HOT MLTPL
704050-0806, 1/2" Flare*3/8" NPTF 90° Forged 1/2" x 3/8" D. HOT MLTPL
704050-0808, 1/2" Flare*1/2" NPTF 90° Forged 1/2" x 1/2" D. HOT MLTPL
704050-0812, 1/2" Flare*3/4" NPTF 90° Forged 1/2" x 3/4" D. HOT MLTPL
704055-04, 1/4" Flare Union 90° Forged 1/4" D. HOT MLTPL
704055-06, 3/8" Flare Union 90° Forged 3/8" D. HOT MLTPL
704055-08, 1/2" Flare Union 90° Forged 1/2" D. HOT MLTPL
704055-10, 5/8" Flare Union 90° Forged 5/8" D. HOT MLTPL
704056-0604, 3/8" Flare*1/4" Flare 3/8" x 1/4" D. HOT MLTPL
704056-0806, 1/2" Flare*3/8" Flare 1/2" x 3/8" D. HOT MLTPL
704056-1008, 5/8" Flare*1/2" Flare 5/8" x 1/2" D. HOT MLTPL
704070-04, 1/4" Flare Swivel Conn Forged 1/4" D. HOT MLTPL
704070-06, 3/8" Flare Swivel Conn Forged 3/8" D. HOT MLTPL
704070-08, 1/2" Flare Swivel Conn Forged 1/2" D. HOT MLTPL
704070-10, 5/8" Flare Swivel Conn Forged 5/8" D. HOT MLTPL
704822-0606, 3/8" OD*9/16"-24 UNS 9/16" x 3/8" D. HOT MLTPL
706100-02, 1/8" NPTF*1/8" NPTF 90° Barstock 1/8" D. HOT MLTPL
706100-04, 1/4" NPTF*1/4" NPTF 90° Barstock 1/4" D. HOT MLTPL
706100-06, 3/8" NPTF*3/8" NPTF 90° Barstock 3/8" D. HOT MLTPL
706100-08, 1/2" NPTF*1/2" NPTF 90° Barstock 1/2" D. HOT MLTPL
706100-12, 3/4" NPTF*3/4" NPTF 90° Barstock 3/4" D. HOT MLTPL
706101-02, 1/8" NPTF Tee Barstock 1/8" D. HOT MLTPL
706101-04, 1/4" NPTF Tee Barstock 1/4" D. HOT MLTPL
706101-06, 3/8" NPTF Tee Barstock 3/8" D. HOT MLTPL
706101-08, 1/2" NPTF Tee Barstock 1/2" D. HOT MLTPL
706101-12, 3/4" NPTF Tee Barstock 3/4" D. HOT MLTPL
706102-02, 1/8" NPTF Cross Barstock 1/8" D. HOT MLTPL
706102-04, 1/4" NPTF Cross Barstock 1/4" D. HOT MLTPL
706102-06, 3/8" NPTF Cross Barstock 3/8" D. HOT MLTPL
706102-08, 1/2" NPTF Cross Barstock 1/2" D. HOT MLTPL
706102-12, 3/4" NPTF Cross Barstock 3/4" D. HOT MLTPL
706103-02, 1/8" NPTF*1/8" NPTF Light 1/8" D. HOT MLTPL
706103-04, 1/4" NPTF*1/4" NPTF Light 1/4" D. HOT MLTPL
706103-06, 3/8" NPTF*3/8" NPTF Light 3/8" D. HOT MLTPL
706103-08, 1/2" NPTF*1/2" NPTF Light 1/2" D. HOT MLTPL
706103-12, 3/4" NPTF*3/4" NPTF Light 3/4" D. HOT MLTPL
706104-02, 1/8" NPTF Union 1/8" D. HOT MLTPL
706104-04, 1/4" NPTF Union 1/4" D. HOT MLTPL
706104-06, 3/8" NPTF Union 3/8" D. HOT MLTPL
706104-08, 1/2" NPTF Union 1/2" D. HOT MLTPL
706104-12, 3/4" NPTF Union 3/4" D. HOT MLTPL
706107-02, 1/8" NPTF*1/8" NPTF Union Barstock 1/8" D. HOT MLTPL
706107-04, 1/4" NPTF*1/4" NPTF Union Barstock 1/4" D. HOT MLTPL
706108-02, 1/8" NPTF Cap 1/8" D. HOT MLTPL
706108-04, 1/4" NPTF Cap 1/4" D. HOT MLTPL
706108-06, 3/8" NPTF Cap 3/8" D. HOT MLTPL
706108-08, 1/2" NPTF Cap 1/2" D. HOT MLTPL
706108-12, 3/4" NPTF Cap 3/4" D. HOT MLTPL
706109-12, 3/4" NPTF Plug 3/4" D. HOT MLTPL
706110-0402, 1/4" NPTF*1/8" NPTF 1/4" x 1/8" D. HOT MLTPL
706110-0602, 3/8" NPTF*1/8" NPTF 3/8" x 1/8" D. HOT MLTPL
706110-0604, 3/8" NPTF*1/4" NPTF 3/8" x 1/4" D. HOT MLTPL
706110-0802, 1/2" NPTF*1/8" NPTF 1/2" x 1/8" D. HOT MLTPL
706110-0804, 1/2" NPTF*1/4" NPTF 1/2" x 1/4" D. HOT MLTPL
706110-0806, 1/2" NPTF*3/8 "NPTF 1/2" x 3/8" D. HOT MLTPL
706110-1202, 3/4" NPTF*3/8" NPTF 3/4" x 1/8" D. HOT MLTPL
706110-1204, 3/4" NPTF*1/4" NPTF 3/4" x 1/4" D. HOT MLTPL
706110-1206, 3/4" NPTF*3/8" NPTF 3/4" x 3/8" D. HOT MLTPL
706110-1208, 3/4" NPTF*1/2" NPTF 3/4" x 1/2" D. HOT MLTPL
706110-1604, 1" NPTF*1/4" NPTF 1" x 1/4" D. HOT MLTPL
706110-1606, 1" NPTF*3/8" NPTF 1" x 3/8" D. HOT MLTPL
706110-1608, 1" NPTF*1/2" NPTF 1" x 1/2" D. HOT MLTPL
706110-1612, 1" NPTF*3/4 "NPTF 1" x 3/4" D. HOT MLTPL
706112-02, 1/8" NPTF*1/8" NPTF 1/8" D. HOT MLTPL
706112-04, 1/4" NPTF*1/4 "NPTF 1/4" D. HOT MLTPL
706112-06, 3/8" NPTF*3/8" NPTF 3/8" D. HOT MLTPL
706112-08, 1/2" NPTF*1/2" NPTF 1/2" D. HOT MLTPL
706112-12, 3/4" NPTF*3/4" NPTF 3/4" D. HOT MLTPL
706113-0224, 1/8" NPTF*1.5" Nipple 1/8" x 1 1/2" D. HOT MLTPL
706113-0232, 1/8" NPTF*2" Nipple 1/8" x 2" D. HOT MLTPL
706113-0240, 1/8" NPTF*2.5" Nipple 1/8" x 2 1/2" D. HOT MLTPL
706113-0248, 1/8" NPTF*3" Nipple 1/8" x 3" D. HOT MLTPL
706113-0424, 1/4" NPTF*1.5" Nipple 1/4" x 1 1/2" D. HOT MLTPL
706113-0432, 1/4" NPTF*2" Nipple 1/4" x 2" D. HOT MLTPL
706113-0440, 1/4" NPTF*2.5" Nipple 1/4" x 2 1/2" D. HOT MLTPL
706113-0448, 1/4" NPTF*3" Nipple 1/4" x 3" D. HOT MLTPL
706113-0624, 3/8" NPTF*1.5" Nipple 3/8" x 1 1/2" D. HOT MLTPL
706113-0632, 3/8" NPTF*2" Nipple 3/8" x 2" D. HOT MLTPL
706114-02, 1/8" NPTF Plug Solid 1/8" D. HOT MLTPL
706114-04, 1/4" NPTF Plug Solid 1/4" D. HOT MLTPL
706114-06, 3/8" NPTF Plug Solid 3/8" D. HOT MLTPL
706114-08, 1/2" NPTF Plug Solid 1/2" D. HOT MLTPL
706114-12, 3/4" NPTF Plug Solid 3/4" D. HOT MLTPL
706115-02, 1/8" NPTF Plug 1/8" D. HOT MLTPL
706115-04, 1/4" NPTF Plug 1/4" D. HOT MLTPL
706115-06, 3/8" NPTF Plug 3/8" D. HOT MLTPL
706115-08, 1/2" NPTF Plug 1/2" D. HOT MLTPL
706115-12, 3/4" NPTF Plug Forged 3/4" D. HOT MLTPL
706116-02, 1/8" NPTF*1/8" NPTF 90° Barstock 1/8" D. HOT MLTPL
706116-04, 1/4" NPTF*1/4" NPTF 90° Barstock 1/4" D. HOT MLTPL
706116-06, 3/8" NPTF*3/8" NPTF 90° Barstock 3/8" D. HOT MLTPL
706116-08, 1/2" NPTF*1/2" NPTF 90° Barstock 1/2" D. HOT MLTPL
706116-12, 3/4" NPTF*3/4" NPTF 90° Barstock 3/4" D. HOT MLTPL
706118-02, 1/8" NPTF*1/8" NPTF 90° Barstock 1/8" D. HOT MLTPL
706118-04, 1/4" NPTF*1/4" NPTF 90° Barstock 1/4" D. HOT MLTPL
706118-06, 3/8" NPTF*3/8" NPTF 90° Barstock 3/8" D. HOT MLTPL
706119-0402, 1/4" NPTF*1/8" NPTF 1/4" x 1/8" D. HOT MLTPL
706119-0602, 3/8" NPTF*1/8" NPTF 3/8" x 1/8" D. HOT MLTPL
706119-0604, 3/8" NPTF*1/4" NPTF 3/8" x 1/4" D. HOT MLTPL
706119-0802, 1/2" NPTF*1/8" NPTF 1/2" x 1/8" D. HOT MLTPL
706119-0804, 1/2" NPTF*1/4" NPTF 1/2" x 1/4" D. HOT MLTPL
706119-0806, 1/2" NPTF*3/8" NPTF 1/2" x 3/8" D. HOT MLTPL
706119-1208, 3/4" NPTF*1/2" NPTF 3/4" x 1/2" D. HOT MLTPL
706120-0202, 1/8" NPTF*1/8" NPTF 1/8" x 1/8" D. HOT MLTPL
706120-0402, 1/4" NPTF*1/8" NPTF 1/4" x 1/8" D. HOT MLTPL
706120-0404, 1/4" NPTF*1/4" NPTF 1/4" x 1/4" D. HOT MLTPL
706120-0602, 3/8" NPTF*1/8" NPTF 3/8" x 1/8" D. HOT MLTPL
706120-0604, 3/8" NPTF*1/4" NPTF 3/8" x 1/4" D. HOT MLTPL
706120-0606, 3/8" NPTF*3/8" NPTF 3/8" x 3/8" D. HOT MLTPL
706120-0804, 1/2" NPTF*1/4" NPTF 1/2" x 1/4" D. HOT MLTPL
706120-0806, 1/2" NPTF*3/8" NPTF 1/2" x 3/8" D. HOT MLTPL
706120-0808, 1/2" NPTF*1/2" NPTF 1/2" x 1/2" D. HOT MLTPL
706120-1208, 3/4" NPTF*1/2" NPTF 3/4" x 1/2" D. HOT MLTPL
706121-02, 1/8" NPTF Plug 1/8" D. HOT MLTPL
706121-04, 1/4" NPTF Plug 1/4" D. HOT MLTPL
706121-06, 3/8" NPTF Plug 3/8" D. HOT MLTPL
706121-08, 1/2" NPTF Plug 1/2" D. HOT MLTPL
706121-12, 3/4" NPTF Plug 3/4" D. HOT MLTPL
706122-02, 1/8" NPTF*1/8" NPTF 1/8" D. HOT MLTPL
706122-04, 1/4" NPTF*1/4" NPTF 1/4" D. HOT MLTPL
706122-06, 3/8" NPTF*3/8" NPTF 3/8" D. HOT MLTPL
706122-08, 1/2" NPTF*1/2" NPTF 1/2" D. HOT MLTPL
706122-12, 3/4" NPTF*3/4" NPTF 3/4" D. HOT MLTPL
706122-16, 1" NPTF*1" NPTF 1" D. HOT MLTPL
706123-0402, 1/4" NPTF*1/8" NPTF 1/4" x 1/8" D. HOT MLTPL
706123-0602, 3/8" NPTF*1/8" NPTF 3/8" x 1/8" D. HOT MLTPL
706123-0604, 3/8" NPTF*1/4" NPTF 3/8" x 1/4" D. HOT MLTPL
706123-0804, 1/2" NPTF*1/4" NPTF 1/2" x 1/4" D. HOT MLTPL
706123-0806, 1/2" NPTF*3/8" NPTF 1/2" x 3/8" D. HOT MLTPL
706123-1208, 3/4" NPTF*1/2" NPTF 3/4" x 1/2" D. HOT MLTPL
706124-02, 1/8" NPTF*1/8" NPTF Barstock 1/8" D. HOT MLTPL
706124-04, 1/4" NPTF*1/4" NPTF Barstock 1/4" D. HOT MLTPL
706124-06, 3/8" NPTF*3/8" NPTF Barstock 3/8" D. HOT MLTPL
706124-08, 1/2" NPTF*1/2" NPTF Barstock 1/2" D. HOT MLTPL
706124-12, 3/4" NPTF*3/4" NPTF Barstock 3/4" D. HOT MLTPL
706125-02, 1/8" NPTF Solid Plug 1/8" D. HOT MLTPL
706125-04, 1/4" NPTF Solid Plug 1/4" D. HOT MLTPL
706125-06, 3/8" NPTF Solid Plug 3/8" D. HOT MLTPL
706125-08, 1/2" NPTF Solid Plug 1/2" D. HOT MLTPL
706127-02, 1/8" NPTF*1/8" NPTF*1/8" NPTF 1/8" D. HOT MLTPL
706127-04, 1/4" NPTF*1/4" NPTF*1/4" NPTF 1/4" D. HOT MLTPL
706127-06, 3/8" NPTF*3/8" NPTF*3/8" NPTF 3/8" D. HOT MLTPL
706127-08, 1/2" NPTF*1/2" NPTF*1/2" NPTF 1/2" D. HOT MLTPL
706127-12, 3/4" NPTF*3/4" NPTF*3/4" NPTF 3/4" D. HOT MLTPL
706130-02, 1/8" NPTF*1/8" NPTF 90° Barstock 1/8" D. HOT MLTPL
706130-04, 1/4" NPTF*1/4" NPTF 90° Barstock 1/4" D. HOT MLTPL
706130-06, 3/8" NPTF*3/8" NPTF 90° Barstock 3/8" D. HOT MLTPL
706131-02, 1/8" NPTF*1/8" NPTF*1/8" NPTF 1/8" D. HOT MLTPL
706131-04, 1/4" NPTF*1/4" NPTF*1/4" NPTF 1/4" D. HOT MLTPL
706131-06, 3/8" NPTF*3/8" NPTF*3/8" NPTF 3/8" D. HOT MLTPL
706131-08, 1/2" NPTF*1/2" NPTF*1/2" NPTF 1/2" D. HOT MLTPL
706140-0604, 3/8" NPTF*1/4" NPTF 3/8" x 1/4" D. HOT MLTPL
706140-0806, 1/2" NPTF*3/8" NPTF 1/2" x 3/8" D. HOT MLTPL
706140-1208, 3/4" NPTF*1/2" NPTF 3/4" x 1/2" D. HOT MLTPL
706200-02, 1/8" NPTF*1/8" NPTF 90° Forged 1/8" D. HOT MLTPL
706200-04, 1/4" NPTF*1/4" NPTF 90° Forged 1/4" D. HOT MLTPL
706200-06, 3/8" NPTF*3/8" NPTF 90° Forged 3/8" D. HOT MLTPL
706200-08, 1/2" NPTF*1/2" NPTF 90° Forged 1/2" D. HOT MLTPL
706200-12, 3/4" NPTF*3/4" NPTF 90° Forged 3/4" D. HOT MLTPL
706201-02, 1/8" NPTF Tee Forged 1/8" D. HOT MLTPL
706201-04, 1/4" NPTF Tee Forged 1/4" D. HOT MLTPL
706201-06, 3/8" NPTF Tee Forged 3/8" D. HOT MLTPL
706201-08, 1/2" NPTF Tee Forged 1/2" D. HOT MLTPL
706201-12, 3/4" NPTF Tee Forged 3/4" D. HOT MLTPL
706205-0604, 3/8" NPTF*1/4" NPTF 3/8" x 1/4" D. HOT MLTPL
706206-060604, 3/8" NPTF*3/8" NPTF *1/4" NPTF 3/8" x 3/8" x 1/4" D. HOT MLTPL
706216-02, 1/8" NPTF*1/8" NPTF 90° Forged 1/8" D. HOT MLTPL
706216-04, 1/4" NPTF*1/4" NPTF 90° Forged 1/4" D. HOT MLTPL
706216-06, 3/8" NPTF*3/8" NPTF 90° Forged 3/8" D. HOT MLTPL
706216-08, 1/2" NPTF*1/2" NPTF 90° Forged 1/2" D. HOT MLTPL
706216-12, 3/4" NPTF*3/4" NPTF 90° Forged 3/4" D. HOT MLTPL
706227-02, 1/8" NPTF*1/8" NPTF*1/8" NPTF 1/8" D. HOT MLTPL
706227-04, 1/4" NPTF*1/4" NPTF*1/4" NPTF 1/4" D. HOT MLTPL
706227-06, 3/8" NPTF*3/8" NPTF*3/8" NPTF 3/8" D. HOT MLTPL
706228-0402, 1/4" NPTF*1/8" NPTF 90° Forged 1/4" x 1/8" D. HOT MLTPL
706228-0608, 3/8" NPTF*1/2" NPTF 90° Forged 3/8" x 1/2" D. HOT MLTPL
706228-0806, 1/2" NPTF*3/8" NPTF 90° Forged 1/2" x 3/8" D. HOT MLTPL
706230-02, 1/8" NPTF*1/8" NPTF 90° Forged 1/8" D. HOT MLTPL
706230-04, 1/4" NPTF*1/4" NPTF 90° Forged 1/4" D. HOT MLTPL
706230-06, 3/8" NPTF*3/8" NPTF 90° Forged 3/8" D. HOT MLTPL
706230-08, 1/2" NPTF*1/2" NPTF 90° Forged 1/2" D. HOT MLTPL
706232-02, 1/8" NPTF Tee Forged 1/8" D. HOT MLTPL
706232-04, 1/4" NPTF Tee Forged 1/4" D. HOT MLTPL
706232-06, 3/8" NPTF Tee Forged 3/8" D. HOT MLTPL
706235-0402, 1/4" NPTF*1/8" NPTF 90° Forged 1/4" x 1/8" D. HOT MLTPL
706235-0604, 3/8" NPTF*1/4" NPTF 90° Forged 3/8" x 1/4" D. HOT MLTPL
706235-0806, 1/2" NPTF*3/8" NPTF 90° Forged 1/2" x 3/8" D. HOT MLTPL
706303-04, 1/4" NPTF*1/4" NPTF 1/4" D. HOT MLTPL
706322-04, 1/4" NPTF*1/4" NPTF 1/4" D. HOT MLTPL
707001-0202, 1/8" HOSE*1/8" NPTF 1/8" x 1/8" D. HOT MLTPL
707001-0204, 1/8" HOSE*1/4" NPTF 1/8" x 1/4" D. HOT MLTPL
707001-0302, 3/16" HOSE*1/8" NPTF 3/16" x 1/8" D. HOT MLTPL
707001-0304, 3/16" HOSE*1/4" NPTF 3/16" x 1/4" D. HOT MLTPL
707001-0402, 1/4" HOSE*1/8" NPTF 1/4" x 1/8" D. HOT MLTPL
707001-0404, 1/4" HOSE*1/4" NPTF 1/4" x 1/4" D. HOT MLTPL
707001-0406, 1/8" HOSE*3/8" NPTF 1/4" x 3/8" D. HOT MLTPL
707001-0408, 1/4" HOSE*1/2" NPTF 1/4" x 1/2" D. HOT MLTPL
707001-0502, 5/16" HOSE*1/8" NPTF 5/16" x 1/8" D. HOT MLTPL
707001-0504, 5/16" HOSE*1/4" NPTF 5/16" x 1/4" D. HOT MLTPL
707001-0506, 5/16" HOSE*3/8" NPTF 5/16" x 3/8" D. HOT MLTPL
707001-0602, 3/8" HOSE*1/8"NPTF 3/8" x 1/8" D. HOT MLTPL
707001-0604, 3/8" HOSE*1/4" NPTF 3/8" x 1/4" D. HOT MLTPL
707001-0606, 3/8" HOSE*3/8" NPTF 3/8" x 3/8" D. HOT MLTPL
707001-0608, 3/8" HOSE*1/2" NPTF 3/8" x 1/2" D. HOT MLTPL
707001-0804, 1/2" HOSE*1/4" NPTF 1/2" x 1/4" D. HOT MLTPL
707001-0806, 1/2" HOSE*3/8" NPTF 1/2" x 3/8" D. HOT MLTPL
707001-0808, 1/2" HOSE*1/2" NPTF 1/2" x 1/2" D. HOT MLTPL
707001-0812, 1/2" HOSE*3/4" NPTF 1/2" x 3/4" D. HOT MLTPL
707001-1006, 5/8" HOSE*3/8" NPTF 5/8" x 3/8" D. HOT MLTPL
707001-1008, 5/8" HOSE*1/2" NPTF 5/8" x 1/2" D. HOT MLTPL
707001-1012, 5/8" HOSE*3/4" NPTF 5/8" x 3/4" D. HOT MLTPL
707001-1208, 3/4" HOSE*1/2" NPTF 3/4" x 1/2" D. HOT MLTPL
707001-1212, 3/4" HOSE*3/4" NPTF 3/4" x 3/4" D. HOT MLTPL
707001-1612, 1" HOSE*3/4" NPTF 1" x 3/4" D. HOT MLTPL
707001-1616, 1" HOSE*1" NPTF 1" x 1" D. HOT MLTPL
707002-0202, 1/8" HOSE*1/8" NPTF 1/8" x 1/8" D. HOT MLTPL
707002-0204, 1/8" HOSE*1/4" NPTF 1/8" x 1/4" D. HOT MLTPL
707002-0302, 3/16" HOSE*1/8" NPTF 3/16" x 1/8" D. HOT MLTPL
707002-0304, 3/16" HOSE*1/4" NPTF 3/16" x 1/4" D. HOT MLTPL
707002-0402, 1/4" HOSE*1/8" NPTF 1/4" x 1/8" D. HOT MLTPL
707002-0404, 1/4" HOSE*1/4" NPTF 1/4" x 1/4" D. HOT MLTPL
707002-0406, 1/4" HOSE*3/8" NPTF 1/4" x 3/8" D. HOT MLTPL
707002-0502, 5/16" HOSE*1/8" NPTF 5/16" x 1/8" D. HOT MLTPL
707002-0504, 5/16" HOSE*/14" NPTF 5/16" x 1/4" D. HOT MLTPL
707002-0506, 5/16" HOSE*3/8" NPTF 5/16" x 3/8" D. HOT MLTPL
707002-0604, 3/8" HOSE*1/4" NPTF 3/8" x 1/4" D. HOT MLTPL
707002-0606, 3/8" HOSE*3/8" NPTF 3/8" x 3/8" D. HOT MLTPL
707002-0608, 3/8" HOSE*1/2" NPTF 3/8" x 1/2" D. HOT MLTPL
707002-0804, 1/2" HOSE*1/4" NPTF 1/2" x 1/4" D. HOT MLTPL
707002-0806, 1/2" HOSE*3/8" NPTF 1/2" x 3/8" D. HOT MLTPL
707002-0808, 1/2" HOSE*1/2" NPTF 1/2" x 1/2" D. HOT MLTPL
707010-0404, 1/4" HOSE I.D*1/4" Dual SE 45° + 37° Flare Swivel 1/4" x 1/4" D. HOT MLTPL
707010-0606, 3/8" HOSE*3/8" 45° Flare 3/8" x 3/8" D. HOT MLTPL
707010-0808, 1/2" HOSE ID.*1/2" 45° Flare 1/2" x 1/2" D. HOT MLTPL
707014-04, 1/4" HOSE*1/4" HOSE 1/4" D. HOT MLTPL
707014-05, 5/16" HOSE*5/16" HOSE 5/16" D. HOT MLTPL
707014-06, 3/8" HOSE*3/8" HOSE 3/8" D. HOT MLTPL
707014-08, 1/2" HOSE*1/2" HOSE 1/2" D. HOT MLTPL
707014-10, 5/8" HOSE*5/8" HOSE 5/8" D. HOT MLTPL
707020-0404, 1/4" HOSE*1/4" NPTF 90° Barstock 1/4" x 1/4" D. HOT MLTPL
707020-0604, 3/8" HOSE*1/4" NPTF 90° Barstock 3/8" x 1/4" D. HOT MLTPL
707020-0606, 3/8" HOSE*3/8" NPTF 90° Barstock 3/8" x 3/8" D. HOT MLTPL
707020-0608, 3/8" HOSE*1/2" NPTF 90° Barstock 3/8" x 1/2" D. HOT MLTPL
707020-0806, 1/2" HOSE*3/8" NPTF 90° Barstock 1/2" x 3/8" D. HOT MLTPL
707024-04, 1/4" HOSE Tee Forged 1/4" D. HOT MLTPL
707024-05, 5/16" HOSE Tee Forged 5/16" D. HOT MLTPL
707024-06, 3/8" HOSE Tee Forged 3/8" D. HOT MLTPL
707042-06, 3/8" HOSE*3/4" NH 3/8" D. HOT MLTPL
707042-08, 1/2" HOSE*3/4" NH 1/2" D. HOT MLTPL
707042-10, 5/8" HOSE*3/4" NH 5/8" D. HOT MLTPL
707042-12, 3/4" HOSE*3/4" NH 3/4" D. HOT MLTPL
707046-0612, 3/8" Hose*3/4" Swivel 3/8" x 3/4" D. HOT MLTPL
707046-0812, 1/2" Hose*3/4" Swivel 1/2" x 3/4" D. HOT MLTPL
707046-1012, 5/8" Hose*3/4" Swivel 5/8" x 3/4" D. HOT MLTPL
707046-1212, 3/4" Hose*3/4" Swivel 3/4" x 3/4" D. HOT MLTPL
707048-0612, 3/8" Hose*3/4" NH 3/8" x 3/4" D. HOT MLTPL
707048-0812, 1/2" Hose*3/4" NH 1/2" x 3/4" D. HOT MLTPL
707048-1012, 5/8" Hose*3/4" NH 5/8" x 3/4" D. HOT MLTPL
707048-1212, 3/4" Hose*3/4" NH 3/4" x 3/4" D. HOT MLTPL
707401-1208, 3/4" Female*1/2" NPTF Swivel 3/4" x 1/2" D. HOT MLTPL
707401-1212, 3/4" Female*3/4" NPTF Swivel 3/4" x 3/4" D. HOT MLTPL
707403-12, 3/4" Female Garden Swivel Union 3/4" D. HOT MLTPL
707404-12, 3/4" Female Hose 3/4" D. HOT MLTPL
707406-12, 3/4" Swivel Nut 3/4" D. HOT MLTPL
707407-12, 3/4"-14 PF Nut 3/4" D. HOT MLTPL
707478-1206, 3/4" Male*3/8" NPTF 3/4" x 3/8" D. HOT MLTPL
707478-1208, 3/4" Male*1/2" NPTF 3/4" x 1/2" D. HOT MLTPL
707478-121208, 3/4" Male*3/4" NPTF*1/2" NPTF 3/4" x 3/4" x 1/2" D. HOT MLTPL
707480-1208, 3/4" Swivel*1/2" NPTF 3/4" x 1/2" D. HOT MLTPL
707480-1212, 3/4" Swivel*3/4" NPTF 3/4" x 3/4" D. HOT MLTPL
707482-1208, 3/4" NH*1/2" NPTF 3/4" x 1/2" D. HOT MLTPL
707484-1208, 3/4" Female Hose*1/2" NPTF 3/4" x 1/2" D. HOT MLTPL
707486-1212, 3/4" NH*3/4" NH 3/4" x 3/4" D. HOT MLTPL
707486-121208, 3/4" NH*3/4" NH*1/2" NPTF 3/4" x 3/4" x 1/2" D. HOT MLTPL

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Anotec Industries Ltd 
5701 Production Way
Langley, BC V3A 4N5 
Canada 
604-514-1544
Visit this company's website

Facility : Langley, British Columbia, Canada

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Anodes[1] [G]
2009 2" x 9" CLD 23 OTHER
2212Z 2.2" x 12" CLD 23 OTHER
2224Z 2.2" x 24" CLD 23 OTHER
2242Z 2.2" x 42" CLD 23 OTHER
2284Z 2.2" x 84" CLD 23 OTHER
2624Z 2.6" x 24" CLD 23 OTHER
2642Z 2.6" x 42" CLD 23 OTHER
2684Z 2.6" x 84" CLD 23 OTHER

[1] Certification request includes the anode only and does not include the cable or the
    sealant.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Anvil International, LLC 
2 Holland Way
Exeter, NH 03833 
United States 
603-418-2800

Facility : Yaphank, NY

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Lubricants[G]
Gruvlok Xtreme Lubricant™ >= 1/2" C. HOT SLC

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Anvil International, LLC 
2 Holland Way
Exeter, NH 03833 
United States 
603-418-2800

Facility : Columbia, PA

Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings
1035 GALV MI 125 F&D THIRD FLG 1 1/2 x 5 - 8 x 13 1/2[G] 1½" x 5" - 8" x 13½" CLD 23 GALV
1035 GALV MI 125 F&D THIRD RED FLG 3 x 9 - 4 x 11[G] 3" x 9" - 4" x 11" CLD 23 GALV
1101 GALV MI 90 ELL 1/8 - 6[G] 1/8" - 6" CLD 23 GALV
1101R GALV MI 90 ELL 1/4 x 1/8 - 4 x 3[G] 1/4" x 1/8"-4" x 3" CLD 23 GALV
1102 GALV MI 45 ELL 1/8 - 6[G] 1/8" - 6" CLD 23 GALV
1103 GALV MI 90 STREET ELL 1/8 - 4[G] 1/8" - 4" CLD 23 GALV
1103R GALV MI 90 STREET ELL 1/2 x 3/8 - 2 x 1 1/2[G] 1/2"x3/8"-2"x1 1/2" CLD 23 GALV
1104 GALV MI 45 STREET ELL 1/8 - 2[G] 1/8" - 2" CLD 23 GALV
1105 GALV MI TEE 1/8 - 6[G] 1/8" - 6" CLD 23 GALV
1105R GALV MI TEE[G] [1] CLD 23 GALV
1106 GALV MI STREET TEE 1/4 - 2[G] 1/4" - 2" CLD 23 GALV
1106R GALV MI STREET TEE 1 1/4 x 1 x 1 1/4[G] 1 1/4" x 1" x 1 1/4" CLD 23 GALV
1107 GALV MI CROSS 1/8 - 4[G] 1/8" - 4" CLD 23 GALV
1108 GALV MI WYE 3/8 - 4[G] 3/8" - 4" CLD 23 GALV
1109 GALV MI PLAIN/PAT S/O 90 ELL 1/4 - 2[G] 1/4" - 2" CLD 23 GALV
1113 GALV MI PLAIN/PAT S/O TEE 1/2 - 2[G] 1/2" - 2" CLD 23 GALV
1119 GALV MI CLOSE RETURN BEND 1 - 2 1/2[G] 1" - 2 1/2" CLD 23 GALV
1121 GALV MI RH COUPLING 1/4 - 4[G] 1/4" - 4" CLD 23 GALV
1121 GALV STEEL RH COUPLING 1/8[G] 1/8" CLD 23 GALV
1124 GALV MI CAP 1/8 - 6[G] 1/8" - 6" CLD 23 GALV
1125 GALV MI REDUCER[G] 1/4"x1/8" - 6"x4" CLD 23 GALV
1133 GALV MI WASTE NUT 1/8 - 2[G] 1/8" - 2" CLD 23 GALV
1134 GALV MI HEX LOCKNUT 1/8 - 2[G] 1/8" - 2" CLD 23 GALV
1137 GALV MI EXTENTION PIECE 3/8 - 1[G] 3/8" - 1" CLD 23 GALV
1138 GALV MI EXTENTION PIECE 1/2 - 1[G] 1/2" - 1" CLD 23 GALV
1160 XH GALV MI AAR 45 STREET ELL 1/2 - 1[G] 1/2" - 1" CLD 23 GALV
1161 XH GALV MI AAR 90 ELL 1/4- 6[G] 1/4" - 6" CLD 23 GALV
1161R XH GALV MI AAR 90 ELL 3/4 x 1/2 - 2 1/2 x 2[G] 3/4"x1/2"-2 1/2"x2" CLD 23 GALV
1162 XH GALV MI AAR 45 ELL 1/4 - 4[G] 1/4" - 4" CLD 23 GALV
1163 XH GALV MI AAR CAP 1/4 - 3[G] 1/4" - 3" CLD 23 GALV
1164 XH GALV MI AAR TEE 1/4 - 6[G] 1/4" - 6" CLD 23 GALV
1164R XH GALV MI AAR TEE[G] ½"x½"x¼" - 4"x4"x2½" CLD 23 GALV
1165 XH GALV MI AAR CROSS 1/4 - 3[G] 1/4" - 3" CLD 23 GALV
1166 XH GALV MI AAR CPLG 1/4 - 3[G] 1/4" - 3" CLD 23 GALV
1167 XH GALV MI AAR REDUCER 3/8 x 1/4 - 4 x 3[G] 3/8"x1/4" - 4"x3" CLD 23 GALV
1170 XH GALV MI AAR 90 STREET ELL 1/4 - 3[G] 1/4" - 3" CLD 23 GALV
1190 GALV FLOOR FLANGE 1/2 - 2[G] 1/2" - 2" CLD 23 GALV
1190 GALV MI FLOOR FLANGE 2 1/2 - 3[G] 2 1/2" - 3" CLD 23 GALV
383 GALV MI HEX BUSHING[G] ½"x3/8" - 2 ½"x2" CLD 23 GALV
385 GALV MI FACE BUSHING[G] 1/4"x1/8" - 3"x2 ½" CLD 23 GALV
390 GALV MI SQ C/S PLUG 1/2 - 1 1/2[G] 1/2" - 1 1/2" CLD 23 GALV
GALV MI 90 F DROP ELL 1/2 - 3/4[G] 1/2" - 3/4" CLD 23 GALV

[1] 1/8" x 1/8" x 1/8" - 6" x 6" x 4"
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.


 
Anvil International, LLC 
2 Holland Way
Exeter, NH 03833 
United States 
603-418-2800

Facility : Elkhart, IN

Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings[G]
7582 Transition Couplings 2" - 6" C. HOT CU
7572 Concentric Reducer, Groove by Groove 2½" x 2" - 6" x 5" C. HOT CU
7575 Concentric Reducer, Groove by Cup 2" x 1" - 4" x 2" C. HOT CU
7551 45° Elbow 2" - 6" C. HOT CU
7550 90° Elbow 2" - 6" C. HOT CU
7560 Tee 2" - 6" C. HOT CU
7574 End Caps 2" - 4" C. HOT CU

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Anvil International, LLC 
2 Holland Way
Exeter, NH 03833 
United States 
603-418-2800

Facility : Kyunggi-Do, Korea, Republic of

Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings[G]
Gruvlok Fig.6050 90° Copper Elbow 2" - 8" C. HOT CU
Gruvlok Fig.6051 45° Copper Elbow 2" - 8" C. HOT CU
Gruvlok Fig.6060 Copper Equal Tee 2" - 8" C. HOT CU
Gruvlok Fig.6061 Copper Reducer Tee 2 1/2"x2" - 6"x5" C. HOT CU
Gruvlok Fig.6064 Copper Reducer Tee 2"x3/4" - 4"x1 1/2" C. HOT CU
Gruvlok Fig.6072 Copper Concentric Reducer 2 1/2"x2" - 8"x6" C. HOT CU
Gruvlok Fig.6074 Copper Cap 2" - 6" C. HOT CU
Gruvlok Fig.6075 Copper Concentric Reducer 2"x1" - 4"x2" C. HOT CU
Gruvlok Fig.6084 Copper Flange Adapter 2" - 6" C. HOT CU

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Aqua-Flo LSP Products Group 
3689 Arrowhead Drive
Carson City, NV 89706 
United States 
775-884-4242
Visit this company's website

Facility : Carson City, NV

Mechanical Plumbing Devices

Trade Designation      

Flexible Plumbing Connectors
KFC-516-PP[G]      
KFC-520-PP[G]      
P028XX-**-! (inner diameter 0.28 inches)[G] [10]      

[1] * - Connector End fitting (any two of each or any two in combination): I1, J2, J3, K6,
    M4, U4, Y1, Y7, Y8, Y15, Z2, Z3, Z5, Z6, Z7, Z9, Z13, Z19
[2] These connectors contain one or more plated ends.
[3] For specific connector diameters maximum length restrictions are as follows: 
    
    0.21" diameter maximum tubing length - 227" 
    0.25" diameter maximum tubing length - 190"
    0.28" diameter maximum tubing length - 170"
    0.31" diameter maximum tubing length - 154" 
    0.38" diameter maximum tubing length - 125"
    0.50" diameter maximum tubing length - 95" 
    0.75" diameter maximum tubing length - 63"
[4] XX in the trade name indicates length and any connector is acceptable to a maximum of 63
    inches in length or higher based on the inner diameter.
[5] * - Connector End fitting (any two of each or any two in combination): A2, A4, F2, H0,
    H1, H4, I1, J2, J3, K2, M4, N1, N4, U4, U5, Y1, Y2, Y3, Y4, Y5, Y7, Z2, Z3, Z5, Z11,
    Z12, Z14
[6] XX in the trade name indicates length; model V025XX-J1J1 is acceptable to a maximum of
    165 inches in length.  All other connectors beginning with P, SFF-PUL, or U are
    acceptable to a maximum of 63 inches in length or higher based on inner diameter.
[7] For specific diameters maximum length restrictions are as follows:
    0.21" diameter maximum tubing length - 227"
    0.22" diameter maximum tubing length - 217"
    0.24" diameter maximum tubing length - 199"
    0.25" diameter maximum tubing length - 190"
    0.28" diameter maximum tubing length - 170"
    0.31" diameter maximum tubing length - 154"
    0.50" diameter maximum tubing length - 95"
    0.75" diameter maximum tubing length - 63"
    Optional Suffix:
    ! - LL (Low Lead Brass)
      - S (Screen)
[8] * - Connector End fitting (any two of each or any two in combination): K5, Z10, Z15
[9] * - Connector End fitting (any two of each or any two in combination): I2, U9, Y9, Y10,
    Y11, Y13, Y14, Z34
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    
[10] XX in the tradename indicates length.  Certification with a length of 48 to 170 inches
     and an inner diameter of 0.28 in.
     Connector end Fitting (any two of each or any two combination): Z34, Z35, Z36, Z37
     (Certification does not include o-rings, washers, or gaskets)
     Optional suffix:
     ! - LL (Low lead brass)
[11] * - Connector End fitting (any two of each or any two in combination): A4, A9, I1, J1,
     J2, J3, K5, K6, U4, U6, Y8, Y15, Y16, Z2, Z3, Z6, Z7, Z9, Z12, Z17, Z18, Z19, Z20, Z29,
     Z30
[12] * - Connector End fitting (any two of each or any two in combination): J2, Z10, Z15
[13] * - Connector End fitting (any two of each or any two in combination): A4, G5, H4, U4
[14] * - Connector End fitting (any two of each or any two in combination): A2, A4, F2, H0,
     H1, H4, J3, N4, U4, Y3, Y4, Z2, Z5, Z12, Z27, Z31
[15] * - Connector End fitting (any two of each or any two in combination): A4, A5, G5, H2
[16] * - Connector End fitting (any two of each or any two in combination): H4


Facility : Hainan, China

Mechanical Plumbing Devices

Trade Designation      

Flexible Plumbing Connectors
KFC-516-PP[G]      
KFC-520-PP[G]      
P028XX-**-! (Inner Diameter 0.28 inches)[G] [11]      

[1] * - Connector End fitting (any two of each or any two in combination): I1, J2, J3, K6,
    M4, U4, Y1, Y7, Y8, Y15, Z2, Z3, Z5, Z6, Z7, Z9, Z13, Z19
[2] These connectors contain one or more plated ends.
[3] XX in the trade name indicates length and any connector is acceptable to a maximum of 63
    inches in length or higher based on the inner diameter.
[4] For specific connector diameters maximum length restrictions are as follows: 
    
    0.21" diameter maximum tubing length - 227" 
    0.25" diameter maximum tubing length - 190"
    0.28" diameter maximum tubing length - 170"
    0.31" diameter maximum tubing length - 154" 
    0.38" diameter maximum tubing length - 125"
    0.50" diameter maximum tubing length - 95" 
    0.75" diameter maximum tubing length - 63"
[5] * - Connector End fitting (any two of each or any two in combination): A2, A4, F2, H0,
    HI, H4, I1, J2, J3, K2, M4, N1, N4, U4, U5, Y1, Y2, Y3, Y4, Y5, Y7, Z2, Z3, Z5, Z11,
    Z12, Z14
[6] XX in the trade name indicates length; model V025XX-J1J1 is acceptable to a maximum of
    165 inches in length.  All other connectors beginning with P, SFF-PUL, or U are
    acceptable to a maximum of 63 inches in length or higher based on inner diameter.
[7] For specific diameters maximum length restrictions are as follows:
    0.21" diameter maximum tubing length - 227"
    0.22  diameter maximum tubing length - 217"
    0.24  diameter maximum tubing length - 199"
    0.25" diameter maximum tubing length - 190"
    0.28" diameter maximum tubing length - 170"
    0.31" diameter maximum tubing length - 154"
    0.50" diameter maximum tubing length - 95"
    0.75" diameter maximum tubing length - 63"
    Optional Suffix:
    ! - LL (Low Lead Brass)
      - S (Screen)
[8] * - Connector End fitting (any two of each or any two in combination): A4, A9, I1, J1,
    J2, J3, K5, K6, U4, U6, Y8, Y15, Y16, Z2, Z3, Z6, Z7, Z9, Z12, Z17, Z18, Z19, Z20, Z29,
    Z30
[9] * - Connector End fitting (any two of each or any two in combination): I2, U9, Y9, Y10,
    Y11, Y13, Y14, Z31, Z34
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    
[10] * - Connector End fitting (any two of each or any two in combination): I2, U9, Y9, Y10,
     Y11, Z31
[11] XX in tradename indicates length.  Certification includes connectors with a length of 48
     to 170 inches and an inner diameter of 0.28 in.  
     Connector End Fittings (any two of each or any two in combination): Z34, Z35, Z36, Z37
     (Certification does not include o-rings, washers or gaskets)
     Optional suffix:
     ! - LL (Low lead brass)
[12] * - Connector End fitting (any two of each or any two in combination): A4, A10, I1, J1,
     J2, K2, K5, M4, N1, N4, U5, Y2, Y3, Y4, Y5, Y6, Y12, Z3, Z9, Z11, Z12, Z27, Z28, Z31, H10
[13] * - Connector End fitting (any two of each or any two in combination):  J2, Z10, Z15
[14] * - Connector End fitting (any two of each or any two in combination): K5, Z10, Z15
[15] * - Connector End fitting (any two of each or any two in combination): A2, A4, F2, H0,
     H1, H4, J3, N4, U4, Y3, Y4, Z2, Z5, Z12, Z27, Z31
[16] * - Connector End fitting (any two of each or any two in combination): A2, A5, G5, H2
[17] * - Connector End fitting (any two of each or any two in combination): H4
[18] * - Connector End fitting (any two of each or any two in combination): A4, G5, H4, U4



 
Aquatherm GmbH 
Biggen 5
D-57439 Attendorn 
Germany 
49 27 22 950 0
Visit this company's website

Facility : Attendorn, Germany

Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings[2] [3] [G]
Aquatherm greenpipe® - Fusion outlet >= 1/2" C. HOT MLTPL
Aquatherm greenpipe® - Wing back 90 elbow >= 1/2" C. HOT MLTPL
Aquatherm greenpipe® - Transition tee >= 1/2" C. HOT MLTPL
Aquatherm greenpipe® - Transition elbow >= 1/2" C. HOT MLTPL
Aquatherm greenpipe® - Transition Piece >= 1/2" C. HOT MLTPL
Aquatherm greenpipe® - NPT threaded back plate elbow >= 1/2" C. HOT MLTPL

[2] Certified for the following model numbers and descriptions:
    
    Aquatherm Greenpipe® - NPT threaded back plate elbow 
    0620108 (1/2" - 20mm) x 1/2" FIP
    0620110 (1/2" - 20mm) x 3/4" FIP
    0620112 (3/4" - 25mm) x 3/4" FIP
    0620113 (3/4" - 25mm) x 1/2" FIP
    
    Aquatherm Greenpipe® - Wing back 90 elbow
    0620158 (1/2" - 20mm) x 1/2" FIP
    
    Aquatherm Greenpipe® Transition Piece
    0621008 (1/2" - 20mm) x 1/2" FIP
    0621010 (1/2" - 20mm) x 3/4" FIP
    0621011 (3/4" - 25mm) x 1/2" FIP
    0621012 (3/4" - 25mm) x 3/4" FIP
    0621013 (1" - 32mm) x 3/4" FIP
    0621108 (1/2" - 20mm) x 1/2" FIP
    0621110 (1/2" - 20mm) x 3/4" FIP
    0621111 (3/4" - 25mm) x 1/2" FIP
    0621112 (3/4" - 25mm) x 3/4" FIP
    0621113 (1" - 32mm) x 3/4" FIP
    0621114 (1" - 32mm) x 1" FIP
    0621115 (1 1/4" - 40mm) x 1" FIP
    0621116 (1 1/4" - 40mm) x 1 1/4" FIP
    0621117 (1 1/2" - 50mm) x 1 1/4" FIP
    0621118 (1.5" - 50mm) x 1.5" FIP
    0621119 (2" - 63mm) x 1.5" FIP
    0621120 (2" - 63mm) x 2" FIP
    0621122 (2.5" - 75mm) x 2" FIP
    0621208 (1/2" - 20mm) x 1/2" MIP
    0621210 (1/2" - 20mm) x 3/4" MIP
    0621211 (3/4" - 25mm) x 1/2" MIP
    0621212 (3/4" - 25mm) x 3/4" MIP
    0621213 (1" - 32mm) x 3/4" MIP
    0621308 (1/2" - 20mm) x 1/2" MIP
    0621310 (1/2" - 20mm) x 3/4" MIP
    0621312 (3/4" - 25mm) x 3/4" MIP
    0621314 (1" - 32mm) x 1" MIP
    0621316 (1" - 32mm) x 1.25" MIP
    0621317 (1 1/4" - 40mm) x 1" MIP
    0621318 (1.25" - 40mm) x 1.25" MIP
    0621319 (1.5" - 50mm) x 1.25" MIP
    0621320 (1.5" - 50mm) x 1.5" MIP
    0621321 (2" - 63mm) x 1.5" MIP
    0621322 (2" - 63mm) x 2" MIP
    0621323 (2.5" - 75mm) x 2" MIP
    0621324 (2.5" - 75mm) x 2.5" MIP
    0621325 (3" - 90mm) x 3" MIP
    
[3] Certified for the following model numbers and descriptions:
    
    Aquatherm Greenpipe® - Transition Elbow
    0623008 (1/2" - 20mm) x 3/4" FIP NPT
    0623010 (1/2" - 20mm) x 1/2" FIP NPT
    0623012 (3/4" - 25mm) x 3/4" FIP NPT
    0623014 (3/4" - 25mm) x 1/2" FIP NPT
    0623016 (1" - 32mm) x 3/4" FIP NPT
    0623018 (1" - 32mm) x 1" FIP NPT
    0623208 (1/2" - 20mm) x 1/2" FIP NPT male/female
    0623506 (1/2" - 20mm) x 1/2" MIP NPT
    0623508 (1/2" - 20mm) x 3/4" MIP NPT
    0623510 (3/4" - 25mm) x 3/4" MIP NPT
    0623512 (1" - 32mm) x 3/4" MIP NPT
    0623514 (1" - 32mm) x 1" MIP NPT
    
    Aquatherm Greenpipe® - Transition Tee
    0625006 (1/2" - 20mm) x (1/2" - 20mm) x 1/2" FIP
    0625008 (1/2" - 20mm) x (1/2" - 20mm) x 3/4" FIP
    0625010 (3/4" - 25mm) x (3/4" - 25mm) x 1/2" FIP
    0625012 (3/4" - 25mm) x (3/4" - 25mm) x 3/4" FIP
    0625014 (1" - 32mm) x (1" - 32mm) x 3/4" FIP
    0625016 (1" - 32mm) x (1" - 32mm) x 1" FIP
    0625022 (1.5" - 50mm) x (1.5" - 50mm) x 1" FIP
    0625506 (1/2" - 20mm) x (1/2" - 20mm) x 1/2" MIP
    Aquatherm Greenpipe® - Fusion Outlet
    0628214 (1.25"/3/4" - 40/25mm x 1/2" FIP)
    0628216 (1.5"/3/4" - 50/25mm x 1/2" FIP)
    0628218 (2"/3/4" - 63/25mm x 1/2" FIP)
    0628220 (2.5"/3/4" - 75/25mm x 1/2" FIP)
    0628222 (3"/3/4" - 90/25mm x 1/2" FIP)
    0628224 (3.5"/3/4" - 110/25mm x 1/2" FIP)
    0628226 (4"/3/4" - 125/25mm x 1/2" FIP)
    0628230 (6"/3/4" - 160/25mm x 1/2" FIP)
    0628232 (8-10"/3/4" - 200-250/25mm x 1/2" FIP)
    0628234 (1.25"/3/4" - 40/25mm x 3/4" FIP)
    0628236 (1.5"/3/4" - 50/25mm x 3/4" FIP)
    0628238 (2"/3/4" - 63/25mm x 3/4" FIP)
    0628240 (2.5"/3/4" - 75/25mm x 3/4" FIP)
    0628242 (3"/3/4" - 90/25mm/3/4" FIP)
    0628244 (3.5"/3/4" - 110/25mm/3/4" FIP)
    0628246 (4"/3/4" - 125/25mm x 3/4" FIP)
    0628250 (6"/3/4" - 160/25mm x 3/4" FIP)
    0628254 (8-10"/3/4" - 200-250/25mm x 3/4" FIP)
    0628260 (2.5"/1" - 75/32mm x 1" FIP)
    0628262 (3"/1" - 90/32mm x 1" FIP)
    0628264 (3.5"/1" - 110/32mm x 1" FIP)
    0628266 (4" x 1" - 125/32mm x 1" FIP)
    0628270 (6"/1" - 160/32mm x 1" FIP)
    0628274 (8-10"/1" - 200-250/32mm x 1" FIP)
    0628314 (1.25"/3/4" - 40/25mm x 1/2" MIP)
    0628316 (1.5"/3/4" - 50/25mm x 1/2" MIP)
    0628318 (2"/3/4" - 63/25mm x 1/2" MIP)
    0628320 (2.5"/3/4" - 75/25mm x 1/2" MIP)
    0628322 (3"/3/4" - 90/25mm x 1/2" MIP)
    0628324 (3.5"/3/4" - 110/25mm x 1/2" MIP)
    0628326 (4"/3/4" - 125/25mm x 1/2" MIP)
    0628330 (6"/3/4" - 160/25mm x 1/2" MIP)
    0628334 (1.25"/3/4" - 40/25mm x 3/4" MIP)
    0628336 (1.5"/3/4" - 50/25mm x 3/4" MIP)
    0628338 (2"/3/4" - 63/25mm x 3/4" MIP)
    0628340 (2.5"/3/4" - 75/25mm x 3/4" MIP)
    0628342 (3"/3/4" - 90/25mm x 3/4" MIP)
    0628344 (3.5"/3/4" - 110/25mm x 3/4" MIP)
    0628346 (4"/3/4" - 125/25mm x 3/4" MIP)
    0628350 (6"/3/4" - 160/25mm x 3/4" MIP)
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Pipe[1]
Aquatherm greenpipe® - 0610208[G] 20 mm C. HOT PP
Aquatherm greenpipe® - 0610210[G] 25 mm C. HOT PP
Aquatherm greenpipe® - 0610212[G] 32 mm C. HOT PP
Aquatherm greenpipe® - 0610214[G] 40 mm C. HOT PP
Aquatherm greenpipe® - 0610216[G] 50 mm C. HOT PP
Aquatherm greenpipe® - 0610218[G] 63 mm C. HOT PP
Aquatherm greenpipe® - 0610220[G] 75 mm C. HOT PP
Aquatherm greenpipe® - 0610222[G] 90 mm C. HOT PP
Aquatherm greenpipe® - 0610224[G] 110 mm C. HOT PP
Aquatherm greenpipe® - 10242[G] 315 mm C. HOT PP
Aquatherm greenpipe® - 10244[G] 355 mm C. HOT PP
Aquatherm greenpipe® - 10246[G] 400 mm C. HOT PP
Aquatherm greenpipe® - 10248[G] 450 mm C. HOT PP
Aquatherm greenpipe® - 0610308[G] 20 mm C. HOT PP
Aquatherm greenpipe® - 0610310[G] 25 mm C. HOT PP
Aquatherm greenpipe® - 0610312[G] 32 mm C. HOT PP
Aquatherm greenpipe® - 0610806[G] 16 mm C. HOT PP
Aquatherm greenpipe® - 0610808[G] 20 mm C. HOT PP
Aquatherm greenpipe® - 0610810[G] 25 mm C. HOT PP
Aquatherm greenpipe® - 0610812[G] 32 mm C. HOT PP
Aquatherm greenpipe® - 0610814[G] 40 mm C. HOT PP
Aquatherm greenpipe® - 0610816[G] 50 mm C. HOT PP
Aquatherm greenpipe® - 0610818[G] 63 mm C. HOT PP
Aquatherm greenpipe® - 0610820[G] 75 mm C. HOT PP
Aquatherm greenpipe® - 0610822[G] 90 mm C. HOT PP
Aquatherm greenpipe® - 0610824[G] 110 mm C. HOT PP
Aquatherm greenpipe® - 0610906[G] 16 mm C. HOT PP
Aquatherm greenpipe® - 0610908[G] 20 mm C. HOT PP
Aquatherm greenpipe® - 0610006[G] 16 mm C. HOT PP
Aquatherm greenpipe® - 0610008[G] 20 mm C. HOT PP
Aquatherm greenpipe® - 0610010[G] 25 mm C. HOT PP
Aquatherm greenpipe® - 0610012[G] 32 mm C. HOT PP
Aquatherm greenpipe® - 0610014[G] 40 mm C. HOT PP
Aquatherm greenpipe® - 0610016[G] 50 mm C. HOT PP
Aquatherm greenpipe® - 0610018[G] 63 mm C. HOT PP
Aquatherm greenpipe® - 0610020[G] 75 mm C. HOT PP
Aquatherm greenpipe® - 0610022[G] 90 mm C. HOT PP
Aquatherm greenpipe® - 0610024[G] 110 mm C. HOT PP
Aquatherm greenpipe® - 0610106[G] 16 mm C. HOT PP
Aquatherm greenpipe® - 0610108[G] 20 mm C. HOT PP
Aquatherm greenpipe® - 0610110[G] 25 mm C. HOT PP

[1] Product may also carry the designation "Fusiotherm®".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings[1]
Aquatherm greenpipe® - 0111006[G] 16 mm C. HOT PP
Aquatherm greenpipe® - 0111008[G] 20 mm C. HOT PP
Aquatherm greenpipe® - 0111010[G] 25 mm C. HOT PP
Aquatherm greenpipe® - 0111012[G] 32 mm C. HOT PP
Aquatherm greenpipe® - 0111014[G] 40 mm C. HOT PP
Aquatherm greenpipe® - 0111016[G] 50 mm C. HOT PP
Aquatherm greenpipe® - 0111018[G] 63 mm C. HOT PP
Aquatherm greenpipe® - 0111020[G] 75 mm C. HOT PP
Aquatherm greenpipe® - 0111022[G] 90 mm C. HOT PP
Aquatherm greenpipe® - 0111024[G] 110 mm C. HOT PP
Aquatherm greenpipe® - 0111109[G] 20/16 mm C. HOT PP
Aquatherm greenpipe® - 0111110[G] 25/16 mm C. HOT PP
Aquatherm greenpipe® - 0111112[G] 25/20 mm C. HOT PP
Aquatherm greenpipe® - 0111114[G] 32/20 mm C. HOT PP
Aquatherm greenpipe® - 0111116[G] 32/25 mm C. HOT PP
Aquatherm greenpipe® - 0111118[G] 40/20 mm C. HOT PP
Aquatherm greenpipe® - 0111120[G] 40/25 mm C. HOT PP
Aquatherm greenpipe® - 0111122[G] 40/32 mm C. HOT PP
Aquatherm greenpipe® - 0111124[G] 50/20 mm C. HOT PP
Aquatherm greenpipe® - 0111126[G] 50/25 mm C. HOT PP
Aquatherm greenpipe® - 0111128[G] 50/32 mm C. HOT PP
Aquatherm greenpipe® - 0111130[G] 50/40 mm C. HOT PP
Aquatherm greenpipe® - 0111131[G] 63/20 mm C. HOT PP
Aquatherm greenpipe® - 0111132[G] 63/25 mm C. HOT PP
Aquatherm greenpipe® - 0111134[G] 63/32 mm C. HOT PP
Aquatherm greenpipe® - 0111136[G] 63/40 mm C. HOT PP
Aquatherm greenpipe® - 0111138[G] 63/50 mm C. HOT PP
Aquatherm greenpipe® - 0111143[G] 75/20 mm C. HOT PP
Aquatherm greenpipe® - 0111144[G] 75/25 mm C. HOT PP
Aquatherm greenpipe® - 0111145[G] 75/32 mm C. HOT PP
Aquatherm greenpipe® - 0111139[G] 75/40 mm C. HOT PP
Aquatherm greenpipe® - 0111140[G] 75/50 mm C. HOT PP
Aquatherm greenpipe® - 0111142[G] 75/63 mm C. HOT PP
Aquatherm greenpipe® - 0111151[G] 90/50 mm C. HOT PP
Aquatherm greenpipe® - 0111152[G] 90/63 mm C. HOT PP
Aquatherm greenpipe® - 0111153[G] 90/75 mm C. HOT PP
Aquatherm greenpipe® - 0111155[G] 110/63 mm C. HOT PP
Aquatherm greenpipe® - 0111157[G] 110/75 mm C. HOT PP
Aquatherm greenpipe® - 0111159[G] 110/90 mm C. HOT PP
Aquatherm greenpipe® - 0111174[G] 160/110 mm SDR 7.4 C. HOT PP
Aquatherm greenpipe® - 0111175[G] 160/110 mm SDR 11 C. HOT PP
Aquatherm greenpipe® - 0111238[G] 63/50 mm C. HOT PP
Aquatherm greenpipe® - 0111242[G] 75/63 mm C. HOT PP
Aquatherm greenpipe® - 0111253[G] 90/75 mm C. HOT PP
Aquatherm greenpipe® - 0112106[G] 16 mm C. HOT PP
Aquatherm greenpipe® - 0112108[G] 20 mm C. HOT PP
Aquatherm greenpipe® - 0112110[G] 25 mm C. HOT PP
Aquatherm greenpipe® - 0112112[G] 32 mm C. HOT PP
Aquatherm greenpipe® - 0112114[G] 40 mm C. HOT PP
Aquatherm greenpipe® - 0112116[G] 50 mm C. HOT PP
Aquatherm greenpipe® - 0112118[G] 63 mm C. HOT PP
Aquatherm greenpipe® - 0112120[G] 75 mm C. HOT PP
Aquatherm greenpipe® - 0112122[G] 90 mm C. HOT PP
Aquatherm greenpipe® - 0112124[G] 110 mm C. HOT PP
Aquatherm greenpipe® - 0112306[G] 16 mm f/m C. HOT PP
Aquatherm greenpipe® - 0112308[G] 20 mm f/m C. HOT PP
Aquatherm greenpipe® - 0112310[G] 25 mm f/m C. HOT PP
Aquatherm greenpipe® - 0112312[G] 32 mm f/m C. HOT PP
Aquatherm greenpipe® - 0112314[G] 40 mm f/m C. HOT PP
Aquatherm greenpipe® - 0112506[G] 16 mm C. HOT PP
Aquatherm greenpipe® - 0112508[G] 20 mm C. HOT PP
Aquatherm greenpipe® - 0112510[G] 25 mm C. HOT PP
Aquatherm greenpipe® - 0112512[G] 32 mm C. HOT PP
Aquatherm greenpipe® - 0112514[G] 40 mm C. HOT PP
Aquatherm greenpipe® - 0112516[G] 50 mm C. HOT PP
Aquatherm greenpipe® - 0112518[G] 63 mm C. HOT PP
Aquatherm greenpipe® - 0112520[G] 75 mm C. HOT PP
Aquatherm greenpipe® - 0112522[G] 90 mm C. HOT PP
Aquatherm greenpipe® - 0112524[G] 110 mm C. HOT PP
Aquatherm greenpipe® - 0112708[G] 20 mm f/m C. HOT PP
Aquatherm greenpipe® - 0112710[G] 25 mm f/m C. HOT PP
Aquatherm greenpipe® - 0112712[G] 32 mm f/m C. HOT PP
Aquatherm greenpipe® - 0112714[G] 40 mm f/m C. HOT PP
Aquatherm greenpipe® - 0113106[G] 16 mm C. HOT PP
Aquatherm greenpipe® - 0113108[G] 20 mm C. HOT PP
Aquatherm greenpipe® - 0113110[G] 25 mm C. HOT PP
Aquatherm greenpipe® - 0113112[G] 32 mm C. HOT PP
Aquatherm greenpipe® - 0113114[G] 40 mm C. HOT PP
Aquatherm greenpipe® - 0113116[G] 50 mm C. HOT PP
Aquatherm greenpipe® - 0113118[G] 63 mm C. HOT PP
Aquatherm greenpipe® - 0113120[G] 75 mm C. HOT PP
Aquatherm greenpipe® - 0113122[G] 90 mm C. HOT PP
Aquatherm greenpipe® - 0113124[G] 110 mm C. HOT PP
Aquatherm greenpipe® - 0113506[G] 20 x 16 x 16 mm C. HOT PP
Aquatherm greenpipe® - 0113508[G] 20 x 16 x 20 mm C. HOT PP
Aquatherm greenpipe® - 0113510[G] 20 x 20 x 16 mm C. HOT PP
Aquatherm greenpipe® - 0113511[G] 20 x 25 x 20 mm C. HOT PP
Aquatherm greenpipe® - 0113512[G] 25 x 16 x 16 mm C. HOT PP
Aquatherm greenpipe® - 0113514[G] 25 x 16 x 20 mm C. HOT PP
Aquatherm greenpipe® - 0113516[G] 25 x 16 x 25 mm C. HOT PP
Aquatherm greenpipe® - 0113518[G] 25 x 20 x 16 mm C. HOT PP
Aquatherm greenpipe® - 0113520[G] 25 x 20 x 20 mm C. HOT PP
Aquatherm greenpipe® - 0113522[G] 25 x 20 x 25 mm C. HOT PP
Aquatherm greenpipe® - 0113528[G] 32 x 16 x 32 mm C. HOT PP
Aquatherm greenpipe® - 0113532[G] 32 x 20 x 20 mm C. HOT PP
Aquatherm greenpipe® - 0113534[G] 32 x 20 x 32 mm C. HOT PP
Aquatherm greenpipe® - 0113538[G] 32 x 25 x 25 mm C. HOT PP
Aquatherm greenpipe® - 0113540[G] 32 x 25 x 32 mm C. HOT PP
Aquatherm greenpipe® - 0113542[G] 40 x 20 x 40 mm C. HOT PP
Aquatherm greenpipe® - 0113544[G] 40 x 25 x 40 mm C. HOT PP
Aquatherm greenpipe® - 0113546[G] 40 x 32 x 40 mm C. HOT PP
Aquatherm greenpipe® - 0113547[G] 50 x 20 x 50 mm C. HOT PP
Aquatherm greenpipe® - 0113548[G] 50 x 25 x 50 mm C. HOT PP
Aquatherm greenpipe® - 0113550[G] 50 x 32 x 50 mm C. HOT PP
Aquatherm greenpipe® - 0113551[G] 50 x 40 x 50 mm C. HOT PP
Aquatherm greenpipe® - 0113552[G] 63 x 20 x 63 mm C. HOT PP
Aquatherm greenpipe® - 0113554[G] 63 x 25 x 63 mm C. HOT PP
Aquatherm greenpipe® - 0113556[G] 63 x 32 x 63 mm C. HOT PP
Aquatherm greenpipe® - 0113558[G] 63 x 40 x 63 mm C. HOT PP
Aquatherm greenpipe® - 0113560[G] 63 x 50 x 63 mm C. HOT PP
Aquatherm greenpipe® - 0113561[G] 75 x 20 x 75 mm C. HOT PP
Aquatherm greenpipe® - 0113562[G] 75 x 25 x 75 mm C. HOT PP
Aquatherm greenpipe® - 0113564[G] 75 x 32 x 75 mm C. HOT PP
Aquatherm greenpipe® - 0113566[G] 75 x 40 x 75 mm C. HOT PP
Aquatherm greenpipe® - 0113568[G] 75 x 50 x 75 mm C. HOT PP
Aquatherm greenpipe® - 0113570[G] 75 x 63 x 75 mm C. HOT PP
Aquatherm greenpipe® - 0113576[G] 90 x 32 x 90 mm C. HOT PP
Aquatherm greenpipe® - 0113578[G] 90 x 40 x 90 mm C. HOT PP
Aquatherm greenpipe® - 0113580[G] 90 x 50 x 90 mm C. HOT PP
Aquatherm greenpipe® - 0113582[G] 90 x 63 x 90 mm C. HOT PP
Aquatherm greenpipe® - 0113584[G] 90 x 75 x 90 mm C. HOT PP
Aquatherm greenpipe® - 0113586[G] 110 x 63 x 110 mm C. HOT PP
Aquatherm greenpipe® - 0113588[G] 110 x 75 x 110 mm C. HOT PP
Aquatherm greenpipe® - 0113590[G] 110 x 90 x 110 mm C. HOT PP
Aquatherm greenpipe® - 0113708[G] 20 mm C. HOT PP
Aquatherm greenpipe® - 0113710[G] 25 mm C. HOT PP
Aquatherm greenpipe® - 0113712[G] 32 mm C. HOT PP
Aquatherm greenpipe® - 0113714[G] 40 mm C. HOT PP
Aquatherm greenpipe® - 0114106[G] 16 mm C. HOT PP
Aquatherm greenpipe® - 0114108[G] 20 mm C. HOT PP
Aquatherm greenpipe® - 0114110[G] 25 mm C. HOT PP
Aquatherm greenpipe® - 0114112[G] 32 mm C. HOT PP
Aquatherm greenpipe® - 0114114[G] 40 mm C. HOT PP
Aquatherm greenpipe® - 0114116[G] 50 mm C. HOT PP
Aquatherm greenpipe® - 0114118[G] 63 mm C. HOT PP
Aquatherm greenpipe® - 0114120[G] 75 mm C. HOT PP
Aquatherm greenpipe® - 0114122[G] 90 mm C. HOT PP
Aquatherm greenpipe® - 0114124[G] 110 mm C. HOT PP
Aquatherm greenpipe® - 0115156[G] 40/20 mm C. HOT PP
Aquatherm greenpipe® - 0115158[G] 40/25 mm C. HOT PP
Aquatherm greenpipe® - 0115160[G] 50/20 mm C. HOT PP
Aquatherm greenpipe® - 0115162[G] 50/25 mm C. HOT PP
Aquatherm greenpipe® - 0115164[G] 63/20 mm C. HOT PP
Aquatherm greenpipe® - 0115166[G] 63/25 mm C. HOT PP
Aquatherm greenpipe® - 0115168[G] 63/32 mm C. HOT PP
Aquatherm greenpipe® - 0115170[G] 75/20 mm C. HOT PP
Aquatherm greenpipe® - 0115172[G] 75/25 mm C. HOT PP
Aquatherm greenpipe® - 0115174[G] 75/32 mm C. HOT PP
Aquatherm greenpipe® - 0115176[G] 90/20 mm C. HOT PP
Aquatherm greenpipe® - 0115178[G] 90/25 mm C. HOT PP
Aquatherm greenpipe® - 0115180[G] 90/32 mm C. HOT PP
Aquatherm greenpipe® - 0115181[G] 90/40 mm C. HOT PP
Aquatherm greenpipe® - 0115182[G] 110/20 mm C. HOT PP
Aquatherm greenpipe® - 0115184[G] 110/25 mm C. HOT PP
Aquatherm greenpipe® - 0115186[G] 110/32 mm C. HOT PP
Aquatherm greenpipe® - 0115188[G] 110/40 mm C. HOT PP
Aquatherm greenpipe® - 0115512[G] 32 mm C. HOT PP
Aquatherm greenpipe® - 0115514[G] 40 mm C. HOT PP
Aquatherm greenpipe® - 0115516[G] 50 mm C. HOT PP
Aquatherm greenpipe® - 0115518[G] 63 mm C. HOT PP
Aquatherm greenpipe® - 0115520[G] 75 mm C. HOT PP
Aquatherm greenpipe® - 0115522[G] 90 mm C. HOT PP
Aquatherm greenpipe® - 0115524[G] 110 mm C. HOT PP
Aquatherm greenpipe® Faser 0670708[G] 20 mm C. HOT MLTPL
Aquatherm greenpipe® Faser 0670710[G] 25 mm C. HOT MLTPL
Aquatherm greenpipe® Faser 0670712[G] 32 mm C. HOT MLTPL
Aquatherm greenpipe® Faser 0670714[G] 40 mm C. HOT MLTPL
Aquatherm greenpipe® Faser 0670716[G] 50 mm C. HOT MLTPL
Aquatherm greenpipe® Faser 0670718[G] 63 mm C. HOT MLTPL
Aquatherm greenpipe® Faser 0670720[G] 75 mm C. HOT MLTPL
Aquatherm greenpipe® Faser 0670722[G] 90 mm C. HOT MLTPL
Aquatherm greenpipe® Faser 0670724[G] 110 mm C. HOT MLTPL
Aquatherm greenpipe® Faser 0670726[G] 125 mm C. HOT MLTPL
Aquatherm greenpipe® Faser 0670730[G] 160 mm C. HOT MLTPL
Aquatherm greenpipe® Faser 0670734[G] 200 mm C. HOT MLTPL
Aquatherm greenpipe® Faser 0670738[G] 250 mm C. HOT MLTPL
Aquatherm greenpipe® Faser 0670742[G] 315 mm C. HOT MLTPL
Aquatherm greenpipe® Faser 0670744[G] 355 mm C. HOT MLTPL
Aquatherm greenpipe® Faser 0670780[G] UV - 160 mm C. HOT MLTPL
Aquatherm greenpipe® Faser 0670784[G] UV - 200 mm C. HOT MLTPL
Aquatherm greenpipe® Faser 0670788[G] UV - 250 mm C. HOT MLTPL

[1] Product may also carry the designation "Fusiotherm®".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Argomm S.p.A. 
Via Camozzi N. 22
24060 Villongo Bergamo 
Italy 
39 035 4260111
Visit this company's website

Facility : Villongo Bergamo, Italy

Mechanical Plumbing Devices

Trade Designation      

O-Rings[1] [G]
EP6702-12      
NB1659-3      

[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
ARI Flow Control Accessories 
Kibbutz Kfar Charuv 12932
Israel 
972 6 676 1980
Visit this company's website

Facility : Kibbutz Kfar Charuv, Israel

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Backflow Preventers[G]
DC 500 1/2" - 2" CLD 23 MLTPL
RP 500 1/2" - 2" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Valves [G]
D-012 1" - 4" CLD 23 MLTPL
D-014 1" - 4" CLD 23 MLTPL
D-015 1" - 4" CLD 23 MLTPL
D-040 C BARAK 1/2" - 2" CLD 23 MLTPL
D-040 St.St. 1/2" - 2" CLD 23 MLTPL
D-040 U BARAK 1/2" - 2" CLD 23 MLTPL
D-050 1" - 4" CLD 23 MLTPL
D-050 St.St 1" - 4" CLD 23 MLTPL
D-050C 1" - 4" CLD 23 MLTPL
D-052 1" - 4" CLD 23 MLTPL
D-060 HF 2" - 10" CLD 23 MLTPL
D-060 HF NS 2" - 10" CLD 23 MLTPL
D-060-C HF 2" - 10" CLD 23 MLTPL
D-060-C HF NS 2" - 10" CLD 23 MLTPL
D-060-M1 3" - 12" CLD 23 MLTPL
D-060-M1-SD 3" - 12" CLD 23 MLTPL
D-060-M1-SS 3" - 12" CLD 23 MLTPL
D-060-NS-M1 3" - 12" CLD 23 MLTPL
D-060-NS-M1-SD 3" - 12" CLD 23 MLTPL
D-060-NS-M1-SS 3" - 12" CLD 23 MLTPL
D-060-NS-SD 3" - 12" CLD 23 MLTPL
D-060-NS-SS 3" - 12" CLD 23 MLTPL
D-060-SD 3" - 12" CLD 23 MLTPL
D-060-SS 3" - 12" CLD 23 MLTPL
D-060-V-M1 3" - 12" CLD 23 MLTPL
D-060-V-M1-SD 3" - 12" CLD 23 MLTPL
D-060-V-M1-SS 3" - 12" CLD 23 MLTPL
D-060-V-SD 3" - 12" CLD 23 MLTPL
D-060-V-SS 3" - 12" CLD 23 MLTPL
D-062 HF 2" - 10" CLD 23 MLTPL
D-062 HF NS 2" - 10" CLD 23 MLTPL
D-065-M1 3" - 12" CLD 23 MLTPL
D-065-M1-SD 3" - 12" CLD 23 MLTPL
D-065-NS-M1 3" - 12" CLD 23 MLTPL
D-065-NS-M1-SD 3" - 12" CLD 23 MLTPL
D-065-NS-M1-SS 3" - 12" CLD 23 MLTPL
D-065-NS-SD 3" - 12" CLD 23 MLTPL
D-065-NS-SS 3" - 12" CLD 23 MLTPL
D-065-SD 3" - 12" CLD 23 MLTPL
D-065-SS 3" - 12" CLD 23 MLTPL
D-065-V-M1 3" - 12" CLD 23 MLTPL
D-065-V-M1-SD 3" - 12" CLD 23 MLTPL
D-065-V-M1-SS 3" - 12" CLD 23 MLTPL
D-065-V-SD 3" - 12" CLD 23 MLTPL
D-065-V-SS 3" - 12" CLD 23 MLTPL
D-065—M1-SS 3" - 12" CLD 23 MLTPL
D-070[G] 2" CLD 23 MLTPL
D-070[G] 3" - 8" CLD 23 MLTPL
K-010 1" - 4" CLD 23 MLTPL
K-010 St.St 1" - 4 " CLD 23 MLTPL
K-012 1" - 4" CLD 23 MLTPL
K-014 1" - 4" CLD 23 MLTPL
K-015 2" - 4" CLD 23 MLTPL
K-016 2" - 4" CLD 23 MLTPL
K-060 HF 2" - 10" CLD 23 MLTPL
K-060 HF NS 2" - 10" CLD 23 MLTPL
K-060 NS-SD 3" - 12" CLD 23 MLTPL
K-060 NS-SS 3" - 12" CLD 23 MLTPL
K-060 SD 3" - 12" CLD 23 MLTPL
K-060 SS 3" - 12" CLD 23 MLTPL
K-060 V-SD 3" - 12" CLD 23 MLTPL
K-060 V-SS 3" - 12" CLD 23 MLTPL
K-060-M1 3" - 12" CLD 23 MLTPL
K-060-M1-SD 3" - 12" CLD 23 MLTPL
K-060-M1-SS 3" - 12" CLD 23 MLTPL
K-060-NS-M1 3" - 12" CLD 23 MLTPL
K-060-NS-M1-SD 3" - 12" CLD 23 MLTPL
K-060-NS-M1-SS 3" - 12" CLD 23 MLTPL
K-060-V-M1 3" - 12" CLD 23 MLTPL
K-060-V-M1-SD 3" - 12" CLD 23 MLTPL
K-060-V-M1-SS 3" - 12" CLD 23 MLTPL
K-100 1" - 2" CLD 23 MLTPL
S-015 3/4" - 1" CLD 23 MLTPL
S-015-SD 3/4" - 1" CLD 23 MLTPL
S-015-SS 3/4" - 1" CLD 23 MLTPL
S-050 St.St. 1/2" - 1" CLD 23 MLTPL
S-050 U SEGEV 1/2" - 1" CLD 23 MLTPL
S-050-C 1/2" - 1" CLD 23 MLTPL
S-052 1/2" - 1" CLD 23 MLTPL
VB-060 8" - 24" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Artesian of Pioneer, Inc. 
50 Industrial Drive
Pioneer, OH 43554 
United States 
419-737-2352
Visit this company's website

Facility : # 1 WI, USA

Process Media

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Oxidative Media[G]
MARIS Media .3 mm - 1.7 mm CLD 23 MNDOX

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

NOTE: Certified for water treatment plant applications.
      This product has not been evaluated for point of use applications.


 
AS America, Inc. (American Standard Inc.) 
1 Centennial Avenue
Piscataway, NJ 08854 
United States 
732-980-3000

Facility : Cienega de Flores, Mexico

Mechanical Plumbing Devices

Trade Designation      

Faucets[1]
1340.105[G]      
1340.107[G]      
1340.109[G]      
1340.119[G]      
1340.225[G]      
1340.227[G]      
1340.265[G]      
1340.267[G]      
1340.825[G]      
1340.827[G]      
1340.855[G]      
1340.857[G]      
1480.100[G]      
1480.101[G]      
1480.110[G]      
1480.115[G]      
1480.150[G]      
2000.100[G]      
2000.101[G]      
2000.101X[G]      
2000.160[G]      
2000.161[G]      
2000.161X[G]      
2064.101[G]      
2064.121[G]      
2064.131[G]      
2064.150[2] [G]      
2064.151[G]      
2064.152[G]      
2064.451[G]      
2064.461[G]      
2064.801[G]      
2064.831 Dual Contral lavatory Faucet[G]      
2175.200[G]      
2175.202[G]      
2175.205[G]      
2175.500[G]      
2175.502[G]      
2175.503[G]      
2175.504[G]      
2175.505[G]      
2175.506[G]      
2175.560[G]      
2175.562[G]      
2175.563[G]      
2175.565[G]      
2275.400[G]      
2275.403[G]      
2275.405[G]      
2275.409[G]      
2275.500[G]      
2275.503[G]      
2275.505[G]      
2275.509[G]      
2275.560[G]      
2275.563[G]      
2275.565[G]      
2275.569[G]      
2337.[2] [3] [G]      
2373.801[G]      
2373.821[G]      
2385.000[G]      
2385.003[G]      
2385.004[G]      
2385.005[G]      
2385.006[G]      
2385.007[G]      
2385.008[G]      
2385.009[G]      
2385.010[G]      
2385.011[G]      
2385.400[G]      
2385.400BP[G]      
2385.403[G]      
2385.403BP[G]      
2385.404[G]      
2385.405[G]      
2385.407[G]      
2475[2] [3] [G]      
2475.500[G]      
2475.550[G]      
2506.101 Single Control Vessel Faucet[G]      
2506.151 Single Control Vessel Faucet[G]      
2506.152 Single Control Vessel Faucet[G]      
2506.153[G]      
2506.155[G]      
2506.162[G]      
2506.165[G]      
2506.172[G]      
2506.175[G]      
2506.192 Electronic Lavatory Faucet[G]      
2506.195 Electronic Lavatory Faucet[G]      
2506.801[G]      
2506.821[G]      
2506.831[G]      
2555.101[G]      
2555.201[G]      
2555.801[G]      
2555.821[G]      
2590.101[G]      
2590.160[G]      
2590.801[G]      
2590.860 Dual Control Lavatory Faucet[G]      
2770.[4] [G]      
2808.[2] [4] [G]      
2904.[2] [3] [4] [G]      
2904.201 Dual Control lavatory Faucet[2] [G]      
2908[2] [3] [4] [G]      
2911.[4] [G]      
3770.[3] [4] [G]      
3801.[4] [G]      
3808.101[G]      
3808.101X[G]      
3821.641[G]      
3841.[4] [G]      
3875.501[G]      
3875.503[G]      
3875.509[G]      
3885[2] [3] [G]      
3885.501[G]      
4005 Single Control Kitchen Faucet with Pulldown Spray[2] [3] [G]      
4040[3] [G]      
4048[3] [G]      
4101.100[G]      
4101.101 Single Control Kitchen Faucet with Pullout Spray[G]      
4101.104[G]      
4101.301 Single Control Kitchen Faucet with Spray[G]      
4101.350[G]      
4101.351[G]      
4114.001[G]      
4114.100 Single Control Kitchen Faucet with Pullout Spray[G]      
4114.140 Single Control Kitchen Faucet with Pullout Spray[G]      
4147.100[1] [2] [G]      
4175.100 Single Control Kitchen Faucet with Pullout Spray[5] [G]      
4175.200[5] [G]      
4175.201[5] [G]      
4175.203[5] [G]      
4175.300 Single Control Kitchen Faucet with Pulldown Spray[G]      
4175.300F15 Single Control Kitchen Faucet with Pulldown Spray[G]      
4175.500[5] [G]      
4175.501[5] [G]      
4175.503[5] [G]      
4175.560[G]      
4175.561[G]      
4175.563[G]      
4175.700[5] [G]      
4175.701[5] [G]      
4175.703[5] [G]      
4184[2] [3] [G]      
4205.000[G]      
4205.001[G]      
4205.003[G]      
4205.104 Single Control Kitchen Faucet with Pullout Spray[5] [G]      
4275.500[G]      
4275.501[G]      
4275.550[G]      
4275.551[G]      
4275.560[G]      
4275.561[G]      
4285.001[G]      
4285.051[G]      
4285.100[G]      
4285.300[G]      
4285.410[G]      
4285.420[G]      
4285.501[G]      
4285.551[G]      
4400.641[G]      
4433.001 Single Control Faucet with Spray[G]      
4433.100 Single Control Kitchen Faucet with Pullout Spray[G]      
4433.150 Single Control Kitchen Faucet with Pullout Spray[G]      
4433.300 Single Control Kitchen Faucet with Pulldown Spray[G]      
4433.350[G]      
4433.410 Single Control Bar Faucet[G]      
4462 Dual Control Kitchen Faucet with Pulldown Spray[3] [4] [G]      
4463.110[G]      
4463.411[G]      
4464 Dual Control Kitchen Faucet with Pulldown Spray[3] [4] [G]      
4504[2] [3] [G]      
4505 Single Control Kitchen Faucet with Pulldown Spray[2] [3] [G]      
4508[2] [3] [G]      
4508.101 Single Control Lavatory Faucet[G]      
4508.201[G]      
4508.801[G]      
4662.001 Kitchen Filter Faucet[G]      
4662.002 Kitchen Filter Faucet[G]      
4662.003 Kitchen Filter Faucet[G]      
4751.[4] [G]      
4770.[4] [G]      
4771.[4] [G]      
4800.[4] [G]      
4801.[4] [G]      
4802.[4] [G]      
5400. Dual Control Lavatory Faucet[4] [G]      
5401 Dual Control Lavatory Faucet[4] [G]      
5402. Dual Control Lavatory Faucet[4] [G]      
5500.140 Dual Control Lavatory Faucet[G]      
5500.145 Dual Control Lavatory Faucet[G]      
5500.170 Dual Control Lavatory Faucet[G]      
5500.174 Dual Control Lavatory Faucet[G]      
5501.140 Dual Control Lavatory Faucet[G]      
5501.145 Dual Control Lavatory Faucet[G]      
5501.170 Dual Control Lavatory Faucet[G]      
5501.175 Dual Control Lavatory Faucet[G]      
5502.140 Dual Control Lavatory Faucet[G]      
5502.145 Dual Control Lavatory Faucet[G]      
5502.170 Dual Control Lavatory Faucet[G]      
5502.175 Dual Control Lavatory Faucet[G]      
6004[2] [3] [G]      
6008[2] [3] [G]      
6008.201[G]      
6008.801[G]      
6024[3] [G]      
6028[2] [G]      
6028.201[G]      
6028.240[G]      
6028.801[G]      
6044[2] [3] [G]      
6054[2] [3] [4] [G]      
6055.102 Electronic Lavatory Faucet[G]      
6055.104[G]      
6055.105 Electronic Lavatory Faucet[G]      
6055.163[G]      
6055.164 Electronic Lavatory Faucet[G]      
6055.165[G]      
6055.193 Electronic Lavatory Faucet[G]      
6055.202 Electronic Lavatory Faucet[G]      
6055.204[G]      
6055.205 Electronic Lavatory Faucet[G]      
6056.102 Electronic Lavatory Faucet[G]      
6056.104 Electronic Lavatory Faucet[G]      
6056.105 Electronic Lavatory Faucet[G]      
6056.163[G]      
6056.164 Electronic Lavatory Faucet[G]      
6056.165[G]      
6056.193 Electronic Lavatory Faucet[G]      
6056.202 Electronic Lavatory Faucet[G]      
6056.204[G]      
6056.205 Electronic Lavatory Faucet[G]      
6057.102[G]      
6057.105[G]      
6057.163[G]      
6057.165[G]      
6057.193 Electronic Lavatory Faucet[G]      
6057.202 Electronic Lavatory Faucet[G]      
6057.205[G]      
6059.102 Electronic Lavatory Faucet[G]      
6059.105 Electronic Lavatory Faucet[G]      
6059.163 Electronic Lavatory Faucet[G]      
6059.165 Electronic Lavatory Faucet[G]      
6059.193 Electronic Lavatory Faucet[G]      
6059.202 Electronic Lavatory Faucet[G]      
6059.205 Electronic Lavatory Faucet[G]      
6074[2] [3] [G]      
6114.300 Single Control Faucet[G]      
6114.301 Single Control Faucet with Spray[G]      
6114.380 Single Control Kitchen Faucet[G]      
6114.381 Single Control Kitchen Faucet w/ Spray[G]      
6211 Dual Control Lavatory Faucet[2] [3] [G]      
6270.[4] [G]      
6274.[4] [G]      
6275.[4] [G]      
6279.[4] [G]      
6310 Single Control Kitchen Faucet with Pullout Spray[2] [3] [G]      
6405.140 Dual Control Kitchen Faucet[G]      
6405.141 Dual Control Kitchen Faucet w/ Spray[G]      
6405.170 Dual Control Kitchen Faucet[G]      
6405.171 Dual Control Kitchen Faucet w/ Spray[G]      
6408.140 Dual Control Kitchen Faucet[G]      
6408.141 Dual Control Kitchen Faucet w/ Spray[G]      
6408.170 Dual Control Kitchen Faucet[G]      
6408.171 Dual Control Kitchen Faucet w/ Spray[G]      
6409.170 Dual Control Kitchen Faucet[G]      
6409.171[G]      
6409.180 Dual Control Kitchen Faucet[G]      
6410[3] [G]      
6411[3] [G]      
6413[3] [G]      
6424[2] [3] [G]      
6425[2] [3] [G]      
6500.140 Dual Control Lavatory Faucet[G]      
6500.145 Dual Control Lavatory Faucet[G]      
6500.170 Dual Control Lavatory Faucet[G]      
6500.174 Dual Control Lavatory Faucet[G]      
6500.175 Dual Control Lavatory Faucet[G]      
6501.140 Dual Control Lavatory Faucet[G]      
6501.145 Dual Control Lavatory Faucet[G]      
6501.170 Dual Control Lavatory Faucet[G]      
6501.175 Dual Control Lavatory Faucet[G]      
6502.140 Dual Control Lavatory Faucet[G]      
6502.145 Dual Control Lavatory Faucet[G]      
6502.170 Dual Control Lavatory Faucet[G]      
6502.175 Dual Control Lavatory Faucet[G]      
6530.140 Dual Control Lavatory Faucet[G]      
6530.145 Dual Control Lavatory Faucet[G]      
6530.170 Dual Control Lavatory Faucet[G]      
6530.173 Dual Control Lavatory Faucet[G]      
6530.174 Dual Control Lavatory Faucet[G]      
6530.175 Dual Control Lavatory Faucet[G]      
6530.180 Dual Control Lavatory Faucet[G]      
6530.183 Dual Control Lavatory Faucet[G]      
6531.140 Dual Control Lavatory Faucet[G]      
6531.145 Dual Control Lavatory Faucet[G]      
6531.170 Dual Control Lavatory Faucet[G]      
6531.175 Dual Control Lavatory Faucet[G]      
6532.140 Dual Control Lavatory Faucet[G]      
6532.145 Dual Control Lavatory Faucet[G]      
6532.170 Dual Control Lavatory Faucet[G]      
6532.175 Dual Control Lavatory Faucet[G]      
6540.140 Dual Control Lavatory Faucet[G]      
6540.145 Dual Control Lavatory Faucet[G]      
6540.170 Dual Control Lavatory Faucet[G]      
6540.171 Dual Control Lavatory Faucet[G]      
6540.174 Dual Control Lavatory Faucet[G]      
6540.175 Dual Control Lavatory Faucet[G]      
6540.177 Dual Control Lavatory Faucet[G]      
6540.178 Dual Control Lavatory Faucet[G]      
6540.179 Dual Control Lavatory Faucet[G]      
6540.180 Dual Control Lavatory Faucet[G]      
6540.188 Dual Control Lavatory Faucet[G]      
6542.140 Dual Control Lavatory Faucet[G]      
6542.145 Dual Control Lavatory Faucet[G]      
6542.170 Dual Control Lavatory Faucet[G]      
6542.175 Dual Control Lavatory Faucet[G]      
6545.140 Dual Control Lavatory Faucet[G]      
6545.170 Dual Control Lavatory Faucet[G]      
6801.[4] [G]      
6802.[4] [G]      
6830. Dual Control Lavatory Faucet[4] [G]      
6831. Dual Control Lavatory Faucet[4] [G]      
6832. Dual Control Lavatory Faucet[4] [G]      
7004[2] [3] [G]      
7005.101 Single Control Lavatory Faucet[G]      
7005.201[G]      
7005.801 Dual Control Lavatory Faucet[G]      
7008[2] [3] [G]      
7010.201[G]      
7010.801[G]      
7024[3] [G]      
7028.201[G]      
7028.801[G]      
7034[2] [3] [G]      
7038.101 Single Control Lavatory Faucet w/ Pull out Spray[G]      
7038.201[G]      
7038.801[G]      
7049.200 Dual Control Lavatory Faucet[G]      
7049.800 Dual Control Lavatory Faucet[G]      
7055.105 Electronic Lavatory Faucet[G]      
7055.115 Electronic Lavatory Faucet[G]      
7055.205 Electronic Lavatory Faucet[G]      
7055.215 Electronic Lavatory Faucet[G]      
7056.105 Electronic Lavatory Faucet[G]      
7056.115 Electronic Lavatory Faucet[G]      
7056.205 Electronic Lavatory Faucet[G]      
7056.215 Electronic Lavatory Faucet[G]      
7057.105 Electronic Lavatory Faucet[G]      
7057.115 Electronic Lavatory Faucet[G]      
7057.205 Electronic Lavatory Faucet[G]      
7057.215 Electronic Lavatory Faucet[G]      
7059.105 Electronic Lavatory Faucet[G]      
7059.115 Electronic Lavatory Faucet[G]      
7059.205 Electronic Lavatory Faucet[G]      
7059.215 Electronic Lavatory Faucet[G]      
7064[2] [3] [G]      
7073.100[G]      
7074[2] [3] [G]      
7084 Dual Control Lavatory Faucet[3] [G]      
7094 Dual Control Lavatory Faucet[2] [3] [G]      
7100.[4] [G]      
7164 Single Control Lavatory Faucet[2] [3] [G]      
7184.101 Single Control Lavatory Faucet[G]      
7184.801 Dual Control Lavatory Faucet[G]      
7184.851 Dual Control Lavatory Faucet[G]      
7230.[4] [G]      
7231.[4] [G]      
7270.[4] [G]      
7271.[4] [G]      
7292. Wall Mount Sink Faucet[4] [G]      
7293. 152 Wall Mount Sink Faucet[G]      
7293. 172H Wall Mount Sink Faucet[G]      
7293. 252 Wall Mount Sink Faucet[G]      
7295. Wall Mount Sink Faucet[4] [G]      
7298. Wall Mount Sink Faucet[4] [G]      
7385[2] [3] [G]      
7385.000[G]      
7385.003[G]      
7385.004[G]      
7385.007 Single Control Lavatory Faucet[G]      
7385.008 Single Control Lavatory Faucet[G]      
7385.040[G]      
7385.043[G]      
7385.044[G]      
7385.045[G]      
7385.046[G]      
7385.047[G]      
7385.050[G]      
7400.[4] [G]      
7401.[4] [G]      
7402.[4] [G]      
7408.400 Dual Control Kitchen Faucet w/ Spray[G]      
7411.[4] [G]      
7415.101 Single Control Lavatory Faucet[G]      
7415.201 Dual Control Lavatory Faucet[G]      
7415.221 Dual Control Lavatory Faucet[G]      
7415.801 Dual Control Lavatory Faucet[G]      
7415.821 Dual Control Lavatory Faucet[G]      
7420.101 Single Control Vessel Faucet[G]      
7420.201 Dual Control Lavatory Faucet[G]      
7420.221 Dual Control Lavatory Faucet[G]      
7420.801 Dual Control Lavatory Faucet[G]      
7420.821 Dual Control Lavatory Faucet[G]      
7430.101 Single Control Lavatory Faucet[G]      
7430.151 Single Control Lavatory Faucet[G]      
7430.152 Single Control Lavatory Faucet[G]      
7430.451 Dual Control Lavatory Faucet[G]      
7430.471 Dual Control Lavatory Faucet[G]      
7430.801 Dual Control Lavatory Faucet[G]      
7430.821 Dual Control Lavatory Faucet[G]      
7431.101 Single Control Lavatory Faucet[G]      
7431.151 Single Control Lavatory Faucet[G]      
7431.152 Single Control Lavatory Faucet[G]      
7431.451 Dual Control Lavatory Faucet[G]      
7431.471 Dual Control Lavatory Faucet[G]      
7431.801 Dual Control Lavatory Faucet[G]      
7431.821 Dual Control Lavatory Faucet[G]      
7440.101 Single Control Lavatory Faucet[G]      
7440.151 Single Control Vessel Faucet[G]      
7440.152 Single Control Vessel Faucet[G]      
7440.801 Dual Control Lavatory Faucet[G]      
7440.851 Dual Control Lavatory Faucet[G]      
7471.[4] [G]      
7484 Dual Control Lavatory Faucet[2] [3] [G]      
7490.[4] [G]      
7500. 140 Centerset Bar/Pantry Faucet[G]      
7500. 145 Centerset Bar/Pantry Faucet[G]      
7500. 170 Centerset Bar/Pantry Faucet[G]      
7500. 175 Centerset Bar/Pantry Faucet[G]      
7500.174 Dual Control Lavatory Faucet[G]      
7500.177[G]      
7500.178 Dual Control Lavatory Faucet[G]      
7500.180 Dual Control Lavatory Faucet[G]      
7500.186[G]      
7500.188 Dual Control Lavatory Faucet[G]      
7501. 140 Centerset Bar/Pantry Faucet[G]      
7501. 145 Centerset Bar/Pantry Faucet[G]      
7501. 170 Centerset Bar/Pantry Faucet[G]      
7501. 175 Centerset Bar/Pantry Faucet[G]      
7502. 140 Centerset Bar/Pantry Faucet[G]      
7502. 145 Centerset Bar/Pantry Faucet[G]      
7502. 170 Centerset Bar/Pantry Faucet[G]      
7502. 175 Centerset Bar/Pantry Faucet[G]      
7545. 145 Centerset Bar/Pantry Faucet[G]      
7545. 170 Centerset Bar/Pantry Faucet[G]      
7545. 175 Centerset Bar/Pantry Faucet[G]      
7573.240 Dual Control Bar Faucet[G]      
7764 Dual Control Lavatory Faucet[2] [3] [G]      
7765 Dual Control Lavatory Faucet[2] [3] [G]      
7765.201 Dual Control Lavatory Faucet[G]      
7768 Dual Control Lavatory Faucet[2] [3] [G]      
7830.000[4] [G]      
7831.[4] [G]      
7871.[4] [G]      
7881.[4] [G]      
7890.[4] [G]      
8115[2] [3] [G]      
8123[2] [3] [G]      
8125[2] [3] [G]      
8410[3] [G]      
8411[3] [G]      
8413[3] [G]      
8871.[4] [G]      
9012.300 Single Control Kitchen Faucet with Pulldown Spray[G]      
9012.301 Single Control Kitchen Faucet with Pulldown Spray[G]      
9012.302 Single Control Kitchen Faucet w/ Pulldown Spray[2] [G]      
9013.801 Dual Control Lavatory Faucet[G]      
9013.850 Dual Control Lavatory Faucet[G]      
9015.100 Single Control Faucet with Pullout Spray[G]      
9016.100 Single Control Kitchen Faucet with Pullout Spray[G]      
9017.201[G]      
9017.400[G]      
9018.201 Dual Control Lavatory Faucet[G]      
9019.201 Dual Control Lavatory Faucet[G]      
9020.201 Dual Control Lavatory Faucet[G]      
9046.200[G]      
9089.501 Dual Control Kitchen Faucet with Spray[G]      
9090 Single Control Faucet[G]      
9090.110 Single Control Lavatory Faucet[G]      
9090.201 Dual Control Lavatory Faucet[G]      
9090.221 Dual Control Lavatory Faucet[G]      
9090.400[G]      
9090.500 Dual Control Kitchen Faucet[G]      
9091.501 Dual Control Kitchen Faucet with Spray[G]      
9092.301 Single Control Kitchen Faucet with Pulldown Spray[G]      
9174.101[G]      
9175.100 Single Control Kitchen Faucet with Pullout Spray[G]      
9204.201 Dual Control Lavatory Faucet[G]      
9256.801 Dual Control Lavatory Faucet[G]      
9257.801 Dual Control Lavatory Faucet[G]      
9258.201 Dual Control Lavatory Faucet[G]      
9258.801 Dual Control Lavatory Faucet[G]      
9259.100 Single Control Lavatory Faucet[G]      
9259.201 Dual Control Lavatory Faucet[G]      
9259.801 Dual Control Lavatory Faucet[G]      
9267.201 Dual Control Lavatory Faucet[G]      
9315.120 Single Control Lavatory Faucet[G]      
9315.221 Dual Control Lavatory Faucet[G]      
9316.001 Single Control Kitchen Faucet with Spray[G]      
9316.003 Single Control Kitchen Faucet with Spray[G]      
9316.110 Single Control Kitchen Faucet[G]      
9316.200 Dual Control Lavatory Faucet[G]      
9316.400 Dual Control Kitchen Faucet[G]      
9316.401 Dual Control Kitchen Faucet[G]      
9316.450 Dual Control Lavatory Faucet[G]      
9316.451 Dual Control Kitchen Faucet with Spray[G]      
9316.800[G]      
9379.101 Single Control Lavatory Faucet[G]      
9379.201 Dual Control Lavatory Faucet[G]      
9389.110 Single Control Lavatory Faucet[G]      
9391.301 Single Control Kitchen Faucet w/ Pull down Spray[G]      
9391.321 Single Control Kitchen Faucet w/ Pull Down Spray[2] [G]      
9449.101 Single control Kitchen Faucet w/ Pull Out Spray[G]      
9449.301 Single Control Kitchen Faucet w/Pull down Spray[2] [G]      

[1] All American Standard products with the faucet designation may also include an
    additional alpha or numeric suffix to indicate the external color or finish.
[2] Faucet designation may also include an alpha suffix to indicate special packaging
    requirements.
[3] Faucet designation may also include an alpha suffix to indicate low lead material.
[4] Suffix code denotes handle style variations.
[5] Faucet designation may also include an alpha-numeric suffix to indicate reduced flow
    rate.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[1] All American Standard products with the faucet designation may also include an
    additional alpha or numeric suffix to indicate the external color or finish.

NOTE: NSF has not conducted production control audits at this facility. Product Listing is
      based on type testing [ISO/IEC Guide 2: 1996(E/F/R) 14.5].


 
Asahi / America, Inc. 
35 Green Street
Malden, MA 02148 
United States 
800-343-3618 
781-321-5409
Visit this company's website

Facility : # 1 Bad Hall, Austria

Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Pipe [G]
Agru PP-H[1] >= 1/2" C. HOT PP
Agru PP-R[1] 1/2" - 20" C. HOT PP
Chem Proline® Pipe[2] [3] 20 mm - 2250 mm CLD 23 PE
Chem Prolok® Pipe[2] [3] 20 mm - 2250 mm CLD 23 PE
PP-Pure[1] 1/2" - 20" C. HOT PP
Proline®[1] >= 1/2" C. HOT PP
Proline® Pro150[1] 1/2" - 20" C. HOT PP
Proline® Pro45[1] >= 1/2" C. HOT PP
Proline® Pro90[1] >= 1/2" C. HOT PP
Provent™[1] >= 1/2" C. HOT PP

[1] Certified for standard dimensions ratios of 7 and 11, the sizes shown represent the pipe
    outer diameter.
[2] The sizes shown represent the pipe outer diameter.
[3] 20-315 mm pipe is Certified for standard dimension ratios of 7 and 11.  400-2250 mm pipe
    is Certified for standard dimension ratios of 11, 17, 33, and 41.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Facility : # 2 Bad Hall, Austria

Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings[G]
45° Elbow 581108005 20 mm CLD 23 PE
45° Elbow 581108007 25 mm CLD 23 PE
45° Elbow 581108010 32 mm CLD 23 PE
45° Elbow 581108015 50 mm CLD 23 PE
45° Elbow 581108020 63 mm CLD 23 PE
45° Elbow 581108030 90 mm CLD 23 PE
45° Elbow 581108040 110 mm CLD 23 PE
90° Elbow 581105005 20 mm CLD 23 PE
90° Elbow 581105005 20 mm CLD 23 PE
90° Elbow 581105005 20 mm CLD 23 PE
90° Elbow 581105005 20 mm CLD 23 PE
90° Elbow 581105020 20 mm CLD 23 PE
90° Elbow 581105030 20 mm CLD 23 PE
90° Elbow 581105040 20 mm CLD 23 PE
Chem Proline® 20 mm - 110 mm CLD 23 PE
Chem Prolok® 20 mm - 110 mm CLD 23 PE
Concentric Reducer 581129101 25 mm x 20 mm CLD 23 PE
Concentric Reducer 581129130 32 mm x 20 mm CLD 23 PE
Concentric Reducer 581129131 32 mm x 25 mm CLD 23 PE
Concentric Reducer 581129211 50 mm x 32 mm CLD 23 PE
Concentric Reducer 581129249 63 mm x 32 mm CLD 23 PE
Concentric Reducer 581129251 90 mm x 63 mm CLD 23 PE
Concentric Reducer 581129422 110 mm x 90 mm CLD 23 PE
Coupling 581116005 20 mm CLD 23 PE
Coupling 581116007 25 mm CLD 23 PE
Coupling 581116010 32 mm CLD 23 PE
Coupling 581116015 50 mm CLD 23 PE
Coupling 581116020 63 mm CLD 23 PE
Coupling 581116030 90 mm CLD 23 PE
Coupling 581116040 110 mm CLD 23 PE
Electrofusion Coupling 581117005 20 mm CLD 23 PE
Electrofusion Coupling 581117007 25 mm CLD 23 PE
Electrofusion Coupling 581117010 32 mm CLD 23 PE
Electrofusion Coupling 581117015 50 mm CLD 23 PE
Electrofusion Coupling 581117020 63 mm CLD 23 PE
Electrofusion Coupling 581117030 90 mm CLD 23 PE
Electrofusion Coupling 581117040 110 mm CLD 23 PE
End Cap 581112005 20 mm CLD 23 PE
End Cap 581112007 25 mm CLD 23 PE
End Cap 581112010 32 mm CLD 23 PE
End Cap 581112015 50 mm CLD 23 PE
End Cap 581112020 63 mm CLD 23 PE
End Cap 581112030 90 mm CLD 23 PE
End Cap 581112040 110 mm CLD 23 PE
Proline® Pro45 90° Elbow 4" - 20" C. HOT PP
Proline® Pro45 Extended Leg 90° Elbow 4" - 8" C. HOT PP
Proline® Pro45 Extended Leg Tee 4" - 16" C. HOT PP
Proline® Pro45 Laterals 4" - 16" C. HOT PP
Proline® Pro45 Laterals with 1/8 Bend 1 1/2" - 16" C. HOT PP
Proline® Pro45 Machined Concentric Reducer 6" x 4" - 12" x 10" C. HOT PP
Proline® Pro45 Machined Flush Reducer 4" x 2" - 16" x 14" C. HOT PP
Proline® Pro45 Machined Instrumentation Fitting 4" - 6" C. HOT PP
Proline® Pro45 P-TRAP 4" - 12" C. HOT PP
Proline® Pro45 Proline x IPS Adapers 4" - 6" C. HOT PP
Proline® Pro45 Reducing Laterals 6" x 4" - 12" x 8" C. HOT PP
Proline® Pro45 Reducing Laterals with 1/8 Bend 6" x 4" - 12" x 8" C. HOT PP
Proline® Pro45 Reducing Sanitary Tee 6" x 4" - 12" x 8" C. HOT PP
Proline® Pro45 Sanitary Tee 4" - 16" C. HOT PP
Proline® Pro45 Segmented 45° Elbow 4" - 16" C. HOT PP
Proline® Pro45 Short Eccentric Reducer 10" x 6" - 14" x 10" C. HOT PP
Proline® Pro45 Stepped Concentric Reducer 4" x 2" - 24" x 18" C. HOT PP
Proline® Pro45 Stub End 4" - 20" C. HOT PP
Proline® Pro45 Tee 4" - 20" C. HOT PP
Provent™ 30° Elbows 4" - 20" C. HOT PP
Provent™ 45° Elbows 4" - 54" C. HOT PP
Provent™ 60° Elbows 4" - 54" C. HOT PP
Provent™ 90° Elbows 4" - 54" C. HOT PP
Provent™ Blind Flanges 4" - 54" C. HOT PP
Provent™ Concentric Reducers 4" x 3" - 54" x 48" C. HOT PP
Provent™ Couplings 4" - 54" C. HOT PP
Provent™ Laterals 4" - 54" C. HOT PP
Provent™ Reducing Laterals 6" x 4" - 20" x 16" C. HOT PP
Provent™ Reducing Tees 6" x 4" - 20" x 16" C. HOT PP
Provent™ Slip Caps 4" - 54" C. HOT PP
Provent™ Slip Flanges 4" - 54" C. HOT PP
Provent™ Tees 4" - 54" C. HOT PP
Stub End (ANSI) 581132005 20 mm CLD 23 PE
Stub End (ANSI) 581132007 25 mm CLD 23 PE
Stub End (ANSI) 581132010 32 mm CLD 23 PE
Stub End (ANSI) 581132015 50 mm CLD 23 PE
Stub End (ANSI) 581132020 63 mm CLD 23 PE
Stub End (ANSI) 581132030 90 mm CLD 23 PE
Stub End (ANSI) 581132040 110 mm CLD 23 PE
Stub End (DIN) 581133005 20 mm CLD 23 PE
Stub End (DIN) 581133007 25 mm CLD 23 PE
Stub End (DIN) 581133010 32 mm CLD 23 PE
Stub End (DIN) 581133012 40 mm CLD 23 PE
Stub End (DIN) 581133015 50 mm CLD 23 PE
Stub End (DIN) 581133020 63 mm CLD 23 PE
Stub End (DIN) 581133025 75 mm CLD 23 PE
Stub End (DIN) 581133030 90 mm CLD 23 PE
Stub End (DIN) 581133040 110 mm CLD 23 PE
Tees 581120005 20 mm CLD 23 PE
Tees 581120007 25 mm CLD 23 PE
Tees 581120010 32 mm CLD 23 PE
Tees 581120015 50 mm CLD 23 PE
Tees 581120020 63 mm CLD 23 PE
Tees 581120030 90 mm CLD 23 PE
Tees 581120040 110 mm CLD 23 PE

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
ASCO Valve Inc. 
50 Hanover Road
Florham Park, NJ 07932 
United States 
973-966-2000
Visit this company's website

Facility : Aiken, SC

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Solenoid Valves [G]
(XX)8256A(YYY)E[1] 1/8" - 1/4" C. HOT MLTPL
(XX)8256A(YYY)EMS[1] 1/8" - 1/4" C. HOT MLTPL
(XX)8356A(YYY)E[1] 1/8" - 1/4" C. HOT MLTPL
(XX)8356A(YYY)EMS[1] 1/8" - 1/4" C. HOT MLTPL
8212A-WWW-XX-YYY-ZZ Composite Solenoid Water Valve[2] [3] [4] 3/8", 1/2", 3/4", 1" CLD 23 MLTPL
8212A-WWW-XX-YYY-ZZ Composite Solenoid Water Valve[3] [4] [5] 3/8", 1/2", 3/4", 1" C. HOT MLTPL
8212A-WWW-XX-YYY-ZZ Composite Solenoid Water Valve[3] [4] [6] 3/8", 1/2", 3/4", 1" C. HOT MLTPL
8212A-WWW-XX-YYY-ZZ Composite Solenoid Water Valve[3] [4] [7] 3/8", 1/2", 3/4", 1" CLD 23 MLTPL
K212A-WWW-XX-YYY-ZZ Composite Solenoid Water Valve[3] [4] [7] 3/8", 1/2", 3/4", 1" CLD 23 MLTPL
K212A-WWW-XX-YYY-ZZ Composite Solenoid Water Valve[3] [4] [5] 3/8", 1/2", 3/4", 1" C. HOT MLTPL
K212A-WWW-XX-YYY-ZZ Composite Solenoid Water Valve[3] [4] [6] 3/8", 1/2", 3/4", 1" C. HOT MLTPL
K212A-WWW-XX-YYY-ZZ Composite Solenoid Water Valve[2] [3] [4] 3/8", 1/2", 3/4", 1" CLD 23 MLTPL
L172P(WW)(Z)[1] 1/8" - 1/4" C. HOT MLTPL
L174P(WW)(Z)[1] 1/8" - 1/4" C. HOT MLTPL
L176P(WW)(Z)[1] 1/8" - 1/4" C. HOT MLTPL
L372P(WW)(Z)[1] 1/8" - 1/4" C. HOT MLTPL
L374P(WW)(Z)[1] 1/8" - 1/4" C. HOT MLTPL
L376P(WW)(Z)[1] 1/8" - 1/4" C. HOT MLTPL
W212A-WWW-XX-YYY-ZZ Composite Solenoid Water Valve[3] [4] [7] 3/8", 1/2", 3/4", 1" CLD 23 MLTPL
W212A-WWW-XX-YYY-ZZ Composite Solenoid Water Valve[2] [3] [4] 3/8", 1/2", 3/4", 1" CLD 23 MLTPL
X212438692-RRR-ZZ[4] [9] [12] 3/4" CLD 23 MLTPL
X212438692-RRR-ZZ[4] [8] [12] 3/4" C. HOT MLTPL
X212506862-RRR-ZZ[4] [11] [12] 3/4" CLD 23 MLTPL
X212506862-RRR-ZZ[4] [10] [12] 3/4" C. HOT MLTPL

[1] XX   - SC, SU, or U 
    YYY  - 101 - 124
    WW   - 05, 06, 07, or 08
    Z    - A, C, or G
[2] WWW (item number) - 003, 009, 011, 021, 027, 029, 039, 045, 047, 057, 063, 065
[3] XX (coil electrical connection) - S0, L0, L1
    YYY (pressure vessel option)    - 100, 200
    ZZ (voltages)                   - D*, E*, F*
[4] Product requires a 15-minute flush prior to use.
[5] WWW (item number) - 001, 005, 007, 019, 023, 025, 037, 041, 043, 055, 059, 061
[6] WWW (item number) - 002, 006, 008, 020, 024, 026, 038, 042, 044, 056, 060, 062
[7] WWW (item number) - 004, 010, 012, 022, 028, 030, 040, 046, 048, 058, 064, 066
[8] RRR (item numbers) - 038, 042, 044, 138, 142, 144
[9] RRR (item numbers) - 040, 046, 048, 140, 146, 148
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    
[10] RRR (item numbers) - 038, 042, 044, 138, 142, 144
[11] RRR (item numbers) - 040, 046, 048, 140, 146, 148
[12] ZZ (Voltage) - D*, E*, F*

Valves [G]
(XX)8256A(YYY)E[1] 1/8" - 1/4" C. HOT MLTPL
(XX)8256A(YYY)EMS[1] 1/8" - 1/4" C. HOT MLTPL
(XX)8356A(YYY)E[1] 1/8" - 1/4" C. HOT MLTPL
(XX)8356A(YYY)EMS[1] 1/8" - 1/4" C. HOT MLTPL
8212A-WWW-XX-YYY-ZZ Composite Solenoid Water Valve[3] [4] [5] 3/8", 1/2", 3/4", 1" C. HOT MLTPL
8212A-WWW-XX-YYY-ZZ Composite Solenoid Water Valve[3] [4] [7] 3/8", 1/2", 3/4", 1" CLD 23 MLTPL
8212A-WWW-XX-YYY-ZZ Composite Solenoid Water Valve[3] [4] [6] 3/8", 1/2", 3/4", 1" C. HOT MLTPL
8212A-WWW-XX-YYY-ZZ Composite Solenoid Water Valve[2] [3] [4] 3/8", 1/2", 3/4", 1" CLD 23 MLTPL
K212A-WWW-XX-YYY-ZZ Composite Solenoid Water Valve[3] [4] [5] 3/8", 1/2", 3/4", 1" C. HOT MLTPL
K212A-WWW-XX-YYY-ZZ Composite Solenoid Water Valve[2] [3] [4] 3/8", 1/2", 3/4", 1" CLD 23 MLTPL
K212A-WWW-XX-YYY-ZZ Composite Solenoid Water Valve[3] [4] [7] 3/8", 1/2", 3/4", 1" CLD 23 MLTPL
K212A-WWW-XX-YYY-ZZ Composite Solenoid Water Valve[3] [4] [6] 3/8", 1/2", 3/4", 1" C. HOT MLTPL
L172P(WW)(Z)[1] 1/8" - 1/4" C. HOT MLTPL
L174P(WW)(Z)[1] 1/8" - 1/4" C. HOT MLTPL
L176P(WW)(Z)[1] 1/8" - 1/4" C. HOT MLTPL
L372P(WW)(Z)[1] 1/8" - 1/4" C. HOT MLTPL
L374P(WW)(Z)[1] 1/8" - 1/4" C. HOT MLTPL
L376P(WW)(Z)[1] 1/8" - 1/4" C. HOT MLTPL
W212A-WWW-XX-YYY-ZZ Composite Solenoid Water Valve[2] [3] [4] 3/8", 1/2", 3/4", 1" CLD 23 MLTPL
W212A-WWW-XX-YYY-ZZ Composite Solenoid Water Valve[3] [4] [7] 3/8", 1/2", 3/4", 1" CLD 23 MLTPL
X212438692-RRR-ZZ[4] [8] [12] 3/4" C. HOT MLTPL
X212438692-RRR-ZZ[4] [9] [12] 3/4" CLD 23 MLTPL
X212506862-RRR-ZZ[4] [11] [12] 3/4" CLD 23 MLTPL
X212506862-RRR-ZZ[4] [10] [12] 3/4" C. HOT MLTPL

[1] XX   - SC, SU, or U 
    YYY  - 101 - 124
    WW   - 05, 06, 07, or 08
    Z    - A, C, or G
[2] WWW (item number) - 003, 009, 011, 021, 027, 029, 039, 045, 047, 057, 063, 065
[3] XX (coil electrical connection) - S0, L0, L1
    YYY (pressure vessel option)    - 100, 200
    ZZ (voltages)                   - D*, E*, F*
[4] Product requires a 15-minute flush prior to use.
[5] WWW (item number) - 001, 005, 007, 019, 023, 025, 037, 041, 043, 055, 059, 061
[6] WWW (item number) - 002, 006, 008, 020, 024, 026, 038, 042, 044, 056, 060, 062
[7] WWW (item number) - 004, 010, 012, 022, 028, 030, 040, 046, 048, 058, 064, 066
[8] RRR (item numbers) - 038, 042, 044, 138, 142, 144
[9] RRR (item numbers) - 040, 046, 048, 140, 146, 148
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    
[10] RRR (item numbers) - 038, 042, 044, 138, 142, 144
[11] RRR (item numbers) - 040, 046, 048, 140, 146, 148
[12] ZZ (Voltage) - D*, E*, F*



 
Ash Grove Cement Company 
11011 Cody Street
Suite 125 
Overland Park, KS 66210 
United States 
913-722-5998

Facility : Leamington, UT

Protective (Barrier) Materials

    Water Water
  Water Contact Contact Contact
Trade Designation Size Restriction Temp Material

Cements [G]
Portland Cement Type I [1] CLD 23 CMNT
Portland Cement Type V [1] CLD 23 CMNT

[1] Certified for pipes 8" and greater, tanks 200 gallons and greater.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

NOTE: All Listed products from this facility are NSF Certified, whether or not they bear the
      NSF Mark.


 
Assured Automation 
19 Walnut Avenue
Clark, NJ 07066 
United States 
800-899-0553 
732-381-2255
Visit this company's website

Facility : Ningbo, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Water Meters[G]
WM-NLC-050 5/8" x 1/2" CLD 23 MLTPL
WM-NLC-075 5/8" x 3/4" CLD 23 MLTPL
WM-NLC-100 1" CLD 23 MLTPL
WM-NLC-100R 3/4" x 1" CLD 23 MLTPL
WM-NLC-150 1 1/2" CLD 23 MLTPL
WM-NLC-200 2" CLD 23 MLTPL
WM-NLC-200(F) 2" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Astral Poly Technik Limited 
207/1, B/H Rajpath Club
Sarkhej Gandhinagar Highway 
Ahmedabad, Gujarat 380059 
India 
91 79 3011 2100
Visit this company's website

Facility : Gujarat, India

Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings[G]
Astral Bendable 1/2" – 2" C. HOT CPVC