NSF Product and Service Listings

These NSF Official Listings are current as of Thursday, November 15, 2018 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?StandardExt=JSM&MaterialType=SLC&



NSF/ANSI 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings.


 
Anvil International, LLC 
2 Holland Way
Exeter, NH 03833 
United States 
603-418-2800


Facility : Yaphank, NY

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Lubricants[G]
Gruvlok Xtreme Lubricant™ >= 1/2" C. HOT SLC

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Best Ring Industrial Corp. 
No. 92-8, Meizhou 2nd Road
Yilan City, Yilan County 260 
Taiwan 
886 3 928 7999
Visit this company's website


Facility : Yilan, Taiwan

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Gasket/Sealing Materials
S6001N[9] [10] C. HOT SLC
S7001N[9] [10] C. HOT SLC
S8001N[9] [10] C. HOT SLC
SIL40 +/-5 S4001[9] [10] C. HOT SLC

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.2 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 2.0 square inches per liter.
[3] This product is also evaluated for use in Mechanical Plumbing Device applications with a
    maximum use restriction of 1.1 square inches/L.
[4] Certified for a maximum surface area to volume ratio of 0.4 sq. in./L.
[5] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.1 sq. in./L.
[6] Certified for a maximum surface area to volume ratio of 1 square inches/L.
[7] This product shall also be evaluated for use in Mechanical Plumbing Device applications
    with a maximum surface area to volume ratio of 0.8 sq.
[8] Certified for a maximum surface area to volume ratio of 1.6 sq. in./L.
[9] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.15 square inches/L.
[10] Certified for a maximum surface area to volume ratio of 1.5 square inches/L.



 
Clearco Products Co., Inc. 
3430 Progress Drive
Suite G 
Bensalem, PA 19020 
United States 
800-533-5823 
215-639-2640


Facility : # 1 USA

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Lubricants
Silicone Grease 2012 >= 1/2" C. HOT SLC



 
Danco, Inc. 
2727 Chemsearch Boulevard
Irving, TX 75062 
United States 
972-438-0990


Facility : # 1 USA

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Lubricants
9D00088693 >= 1/2" C. HOT SLC
9D0080360A >= 1/2" C. HOT SLC
9DA080360A >= 1/2" C. HOT SLC
9DD0088693 >= 1/2" C. HOT SLC
9DD080360A >= 1/2" C. HOT SLC



 
Datwyler Sealing Solutions USA, Inc. 
875 Center Drive
Vandalia, OH 45377 
United States 
937-387-2800
Visit this company's website


Facility : Vandalia, OH

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Gasket/Sealing Materials
S60-8191[4] [3] C. HOT SLC
S70-8191[4] [3] C. HOT SLC

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.5 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 2.5 square inches/L.
[3] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[4] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 sq. in./L.

O-Rings
S60-8191[4] [3] C. HOT SLC
S70-8191[4] [3] C. HOT SLC

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.5 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 2.5 square inches/L.
[3] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[4] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 sq. in./L.



 
Datwyler Sealing Solutions USA. Inc. 
2501 Thunderhawk Court
Dayton, OH 45414 
United States 
937-387-2800
Visit this company's website


Facility : # 1 Shanghai, China

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Gasket/Sealing Materials
S320[3] [2] C. HOT SLC
S720[3] [G] [2] C. HOT SLC
SG620[3] [G] [2] C. HOT SLC

[1] Certified for a maximum surface area to volume ratio of 1 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[3] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum surface area to volume ratio of 2.0 sq. in./L.
[4] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.9 sq. in./L.
[5] Certified for a maximum surface area to volume ratio of 1.3 sq. in./L.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Dow Silicones Corporation 
P.O. Box 994
Mail No. C03101 
Midland, MI 48686-0994 
United States 
989-496-4000


Facility : Elizabethtown, KY

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Sealants
DOWSIL™ 732 Gasket Sealant, Aluminum [1] C. HOT SLC
DOWSIL™ 732 Gasket Sealant, Black [1] C. HOT SLC
DOWSIL™ 732 Gasket Sealant, Bronze [1] C. HOT SLC
DOWSIL™ 732 Gasket Sealant, Clear [1] C. HOT SLC
DOWSIL™ 732 Gasket Sealant, White [1] C. HOT SLC
DOWSIL™ 732 Multi-Purpose, Aluminum [1] C. HOT SLC
DOWSIL™ 732 Multi-Purpose, Black [1] C. HOT SLC
DOWSIL™ 732 Multi-Purpose, Bronze [1] C. HOT SLC
DOWSIL™ 732 Multi-Purpose, Clear [1] C. HOT SLC
DOWSIL™ 732 Multi-Purpose, White [1] C. HOT SLC
DOWSIL™ 748 Non-Corrosive Sealant [2] C. HOT SLC
DOWSIL™ Appliance Sealant I - White [1] C. HOT SLC

[1] Certified for a maximum surface area to volume ratio of 14.5 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 0.4 sq. in./L.



Facility : Greensboro, NC

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Lubricants
MOLYKOTE™ 111 Compound [1] C. HOT SLC
MOLYKOTE™ 4 Electrical Insulating Compound [1] C. HOT SLC
MOLYKOTE™ 7 Release Compound [1] C. HOT SLC
MOLYKOTE™ High Vacuum Grease [1] C. HOT SLC

[1] Certified for a maximum surface area to volume ratio of 40 sq. in./L.

Sealants
DOWSIL™ 732 Multi-Purpose Sealant, Aluminum [2] C. HOT SLC
DOWSIL™ 732 Multi-Purpose Sealant, Black [2] C. HOT SLC
DOWSIL™ 732 Multi-Purpose Sealant, Clear [2] C. HOT SLC
DOWSIL™ 732 Multi-Purpose Sealant, White [2] C. HOT SLC
DOWSIL™ 748 Non-Corrosive Sealant [3] C. HOT SLC
DOWSIL™ HM-2500 Assembly Sealant Clear [2] C. HOT SLC
DOWSIL™ HM-2510 Assembly Sealant Clear [2] C. HOT SLC
DOWSIL™ HM-2515 Assembly Sealant Clear [2] C. HOT SLC
DOWSIL™ HM-2520 Assembly Sealant Clear [2] C. HOT SLC
DOWSIL™ HM-2600 Silicone Assembly Sealant [2] C. HOT SLC

[2] Certified for a maximum surface area to volume ratio of 14.5 sq. in./L.
[3] Certified for a maximum surface area to volume ratio of 0.4 sq. in./L.



Facility : Wiesbaden, Germany

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Lubricants
MOLYKOTE™ G-5511 Water Tap Compound [1] C. HOT SLC
SILASTIC™ 9900-50 Liquid Silicone Rubber Kit[2] [3] C. HOT SLC
SILASTIC™ RBL-9200-50 Liquid Silicone Rubber Part A&B[2] [3] C. HOT SLC

[1] Certified for a maximum surface area to volume ratio of 40 sq. in./L.
[2] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 14.5 sq. in./L.  Certified product requires a
    post-cure of 4 hours at 200°C.
[3] Certified for a maximum surface area to volume ratio of 14.5 sq. in./L.



 
Elastotech s.r.l. 
Via Provinciale, 92/94
24060 Castelli Calepio (BG) 
Italy 
39 035 44 96 000
Visit this company's website


Facility : Castelli Calepio (BG), Italy

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Gasket/Sealing Materials
ME2020/20[1] [4] 20 sq. in./L C. HOT SLC
ME2020/25[1] [4] 20 sq. in./L C. HOT SLC
ME2020/30[1] [4] 20 sq. in./L C. HOT SLC
ME2020/35[1] [4] 20 sq. in./L C. HOT SLC
ME2020/40[1] [4] 20 sq. in./L C. HOT SLC
ME2020/45[1] [4] 20 sq. in./L C. HOT SLC
ME2020/50[1] [4] 20 sq. in./L C. HOT SLC
ME2020/55[1] [4] 20 sq. in./L C. HOT SLC
ME2020/60[1] [4] 20 sq. in./L C. HOT SLC
ME2020/65[1] [4] 20 sq. in./L C. HOT SLC
ME2020/70[1] [4] 20 sq. in./L C. HOT SLC
ME2020/75[1] [4] 20 sq. in./L C. HOT SLC
ME2020/80[1] [4] 20 sq. in./L C. HOT SLC

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum surface area to volume ratio of 20 sq. in./L.
[2] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum surface area to volume ratio of 5.6 sq. in./L.
[3] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum surface area to volume ratio of 2.0 sq. in./L.
[4] This product is Certified for the following colors:
    Transparent (no color), White, Black, Red, Red 3000, Blue, Yellow, Light green, Dark
    green, Light grey, and Dark grey
    Numbers /20 to /80 in the Trade Designation represent the shore hardness

O-Rings
ME2020/20[1] [4] 20 sq. in./L C. HOT SLC
ME2020/25[1] [4] 20 sq. in./L C. HOT SLC
ME2020/30[1] [4] 20 sq. in./L C. HOT SLC
ME2020/35[1] [4] 20 sq. in./L C. HOT SLC
ME2020/40[1] [4] 20 sq. in./L C. HOT SLC
ME2020/45[1] [4] 20 sq. in./L C. HOT SLC
ME2020/50[1] [4] 20 sq. in./L C. HOT SLC
ME2020/55[1] [4] 20 sq. in./L C. HOT SLC
ME2020/60[1] [4] 20 sq. in./L C. HOT SLC
ME2020/65[1] [4] 20 sq. in./L C. HOT SLC
ME2020/70[1] [4] 20 sq. in./L C. HOT SLC
ME2020/75[1] [4] 20 sq. in./L C. HOT SLC
ME2020/80[1] [4] 20 sq. in./L C. HOT SLC

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum surface area to volume ratio of 20 sq. in./L.
[2] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum surface area to volume ratio of 5.6 sq. in./L.
[3] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum surface area to volume ratio of 2.0 sq. in./L.
[4] This product is Certified for the following colors:
    Transparent (no color), White, Black, Red, Red 3000, Blue, Yellow, Light green, Dark
    green, Light grey, and Dark grey
    Numbers /20 to /80 in the Trade Designation represent the shore hardness



 
Fannteer Co., Ltd. 
3F, No. 392, Section 1, Neihu Road
Neihu District, Taipei City 11493 
Taiwan 
886 22 798 6583
Visit this company's website


Facility : Shanghai, China

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Gasket/Sealing Materials
MQ7001[6] [G] [2] C. HOT SLC
SI603073[6] [G] [2] C. HOT SLC
SI702002[6] [G] [2] C. HOT SLC

[1] Certified for a maximum surface area to volume ratio of 1.3 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[3] Certified for a maximum surface area to volume ratio of 1 sq. in./L.
[4] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.9 sq. in./L.
[5] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 1.5 sq. in./L.
[6] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 sq. in./L.
[7] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.2 sq. in./L.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

O-Rings
MQ7001[6] [G] [2] C. HOT SLC
SI603073[6] [G] [2] C. HOT SLC
SI702002[6] [G] [2] C. HOT SLC

[1] Certified for a maximum surface area to volume ratio of 1.3 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[3] Certified for a maximum surface area to volume ratio of 1 sq. in./L.
[4] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.9 sq. in./L.
[5] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 1.5 sq. in./L.
[6] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 sq. in./L.
[7] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.2 sq. in./L.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Flowserve Sulphur Springs Operation 
1511 Jefferson Street
Sulphur Springs, TX 75482 
United States 
903-439-3151


Facility : Sulphur Springs, TX

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Lubricants
BTR Valve Sealant #234 >= 1/2" CLD 23 SLC
Nordstrom Valve Sealant #234 >= 1/2" CLD 23 SLC

[1] Suffix letters A, B, C, D, G, J, and K indicate stick size.



 
GE Mao Rubber Industrial Co., Ltd. 
No. 15, Kung-Yeh East 4th Road
Lu-Kang Chen, Changhua Hsien 
Taiwan 
886 4 781 0288
Visit this company's website


Facility : Zhan-Shan City, China

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Gasket/Sealing Materials
S7031 AB [1] C. HOT SLC

[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[2] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum surface area to volume ratio of 2.0 sq. in./L.
[5] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[6] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum surface area to volume ratio of 2.0 sq. in./L.

O-Rings
S7031 AB [1] C. HOT SLC

[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[2] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum surface area to volume ratio of 2.0 sq. in./L.
[5] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[6] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum surface area to volume ratio of 2.0 sq. in./L.

[3] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum surface area to volume ratio of 0.2 sq. in./L.
[4] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum surface area to volume ratio of 0.4 sq. in./L.


 
Gulf Rubber Australia Pty Ltd. 
12-13 Green Street
Revesby 
Sydney, NSW 2212 
Australia 
61 2 9772 4877
Visit this company's website


Facility : Changhua Hsien, Taiwan

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Gasket/Sealing Materials
Gulf Rubber Formulation 7400 [1] CLD 23 SLC
Gulf Rubber Formulation 7400-7800 Silicone [1] CLD 23 SLC
Gulf Rubber Formulation 7500 [1] CLD 23 SLC
Gulf Rubber Formulation 7600 [1] CLD 23 SLC
Gulf Rubber Formulation 7700 [1] CLD 23 SLC
Gulf Rubber Formulation 7800 [1] CLD 23 SLC

[1] Certified for a maximum surface area to volume ratio of 5.0 sq. in./L.
[2] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 sq. in./L.
[3] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[4] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 6.0 sq. in./L.
[5] Certified for a maximum surface area to volume ratio of 6.0 sq. in./L.

O-Rings
Gulf Rubber Formulation 7400 [1] CLD 23 SLC
Gulf Rubber Formulation 7400-7800 Silicone [1] CLD 23 SLC
Gulf Rubber Formulation 7500 [1] CLD 23 SLC
Gulf Rubber Formulation 7600 [1] CLD 23 SLC
Gulf Rubber Formulation 7700 [1] CLD 23 SLC
Gulf Rubber Formulation 7800 [1] CLD 23 SLC

[1] Certified for a maximum surface area to volume ratio of 5.0 sq. in./L.
[2] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 sq. in./L.
[3] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[4] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 6.0 sq. in./L.
[5] Certified for a maximum surface area to volume ratio of 6.0 sq. in./L.



Facility : Ho Chi Minh City, Vietnam

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Gasket/Sealing Materials
Gulf Rubber Formulation 7400 [10] CLD 23 SLC
Gulf Rubber Formulation 7400-7800 Silicone [10] CLD 23 SLC
Gulf Rubber Formulation 7500 [10] CLD 23 SLC
Gulf Rubber Formulation 7600 [10] CLD 23 SLC
Gulf Rubber Formulation 7700 [10] CLD 23 SLC
Gulf Rubber Formulation 7800 [10] CLD 23 SLC

[1] This product has been evaluated for use in Mechanical Plumbing Device applications with
    a maximum use restriction of 0.3 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 3 sq. in./L.
[3] This product has been evaluated for use in Mechanical Plumbing Device applications with
    a maximum use restriction of 2.0 sq. in./L.
[4] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[5] Certified for a maximum surface area to volume ratio of 4.0 sq. in./L.
[6] This product has been evaluated for use in Mechanical Plumbing Device applications with
    a maximum use restriction of 6.0 sq. in/L.
[7] Certified for a maximum surface area to volume ratio of 6.0 sq. in./L.
[8] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.15 sq. in./L.
[9] Certified for a maximum surface area to volume ratio of 1.5 sq. in./L.
[10] Certified for a maximum surface area to volume ratio of 5.0 sq. in./L.
[11] Certified for a maximum surface area to volume ratio of 1.6 sq. in/L.

O-Rings
Gulf Rubber Formulation 7400 [10] CLD 23 SLC
Gulf Rubber Formulation 7400-7800 Silicone [10] CLD 23 SLC
Gulf Rubber Formulation 7500 [10] CLD 23 SLC
Gulf Rubber Formulation 7600 [10] CLD 23 SLC
Gulf Rubber Formulation 7700 [10] CLD 23 SLC
Gulf Rubber Formulation 7800 [10] CLD 23 SLC

[1] This product has been evaluated for use in Mechanical Plumbing Device applications with
    a maximum use restriction of 0.3 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 3 sq. in./L.
[3] This product has been evaluated for use in Mechanical Plumbing Device applications with
    a maximum use restriction of 2.0 sq. in./L.
[4] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[5] Certified for a maximum surface area to volume ratio of 4.0 sq. in./L.
[6] This product has been evaluated for use in Mechanical Plumbing Device applications with
    a maximum use restriction of 6.0 sq. in/L.
[7] Certified for a maximum surface area to volume ratio of 6.0 sq. in./L.
[10] Certified for a maximum surface area to volume ratio of 5.0 sq. in./L.



 
Hun-Yi Rubber Industrial Co., Ltd. 
No. 323, Ren-Ay Road, Ho Mei Chen
Changhua Hsien 
Taiwan 
886 4 755 1315


Facility : Changhua Hsien, Taiwan

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Gasket/Sealing Materials
SI-XXY[5] [6] [7] C. HOT SLC

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.1 sq. in/L.
[2] Certified for a maximum surface area to volume ratio of 1.0 sq. in./L.
[3] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[4] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.2 sq. in/L.
[5] SI-XXY
    XX - Shore A - 30, 40, 50, 60, 70, 80, 90
    Y - Colour
    T - Translucent
    R - Red
    B - Blue
[6] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 5.0 sq. in./L.
[7] Certified for a maximum surface area to volume ratio of 5.0 sq. in./L.
[8] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.08 sq. in/L.
[9] Certified for a maximum surface area to volume ratio of 0.85 sq. in./L.
[10] This product has also been evaluated for use in Mechanical Plumbing Device applications
     with a maximum use restriction of 0.02 sq. in./L.
[11] Certified for a maximum surface area to volume ratio of 0.28 sq. in./L.

O-Rings
SI-XXY[5] [6] [7] C. HOT SLC

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.1 sq. in/L.
[2] Certified for a maximum surface area to volume ratio of 1.0 sq. in./L.
[3] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[4] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.2 sq. in/L.
[5] SI-XXY
    XX - Shore A - 30, 40, 50, 60, 70, 80, 90
    Y - Colour
    T - Translucent
    R - Red
    B - Blue
[6] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 5.0 sq. in./L.
[7] Certified for a maximum surface area to volume ratio of 5.0 sq. in./L.



 
HUSKEY Specialty Lubricants 
1580 Industrial Avenue
Norco, CA 92860-2946 
United States 
951-340-4000


Facility : Norco, CA

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Lubricants [G]
Huskey 350 Silicone [1] D. HOT SLC
Slipkote 350 Silicone [1] D. HOT SLC

[1] Certified for a maximum surface area to volume ratio of 40 sq. in./L.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Jet Gasket & Seal Co. 
3245-H East Patrick Lane
Las Vegas, NV 89120 
United States 
702-818-5589


Facility : # 1 Vietnam

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Gasket/Sealing Materials
RR977[1] [2] C. HOT SLC

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[3] This product has also been evaluated for use in Mechanical Plumbing Device application
    with a maximum use restriction of 0.4 sq. in./L.
[4] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.1 sq. in./L.

O-Rings
RR977[1] [2] C. HOT SLC

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[3] This product has also been evaluated for use in Mechanical Plumbing Device application
    with a maximum use restriction of 0.4 sq. in./L.
[4] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.1 sq. in./L.



 
Lav. El. Gomma S.R.L. 
Via Also Moro, 20/22
25033 Cologne (BS) 
Italy 
39 030 7050956
Visit this company's website


Facility : Cologne (BS), Italy

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Gasket/Sealing Materials
01/C50VMQ[1] [2] C. HOT SLC
01/C60VMQ[1] [2] C. HOT SLC
01/C70VMQ[1] [2] C. HOT SLC
01/L50VMQ[1] [2] C. HOT SLC
01/L60VMQ[1] [2] C. HOT SLC
01/L70VMQ[1] [2] C. HOT SLC
01/M50VMQ[1] [2] C. HOT SLC
01/M60VMQ[1] [2] C. HOT SLC
01/M70VMQ[1] [2] C. HOT SLC
01/N50VMQ[1] [2] C. HOT SLC
01/N60VMQ[1] [2] C. HOT SLC
01/N70VMQ[1] [2] C. HOT SLC

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[3] Certified for a maximum surface area to volume ratio of 0.75 sq. in./L.
[4] This product has been evaluated for use in Mechanical Plumbing Device applications with
    a maximum use restriction of 0.65 sq. in/L.
[5] Certified for a maximum surface area to volume ratio of 0.5 sq. in./L.
[6] Certified for a maximum surface area to volume ratio of 10.0 sq. in./L.
[7] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 10 sq. in./L.

O-Rings
01/C50VMQ[1] [2] C. HOT SLC
01/C60VMQ[1] [2] C. HOT SLC
01/C70VMQ[1] [2] C. HOT SLC
01/L50VMQ[1] [2] C. HOT SLC
01/L60VMQ[1] [2] C. HOT SLC
01/L70VMQ[1] [2] C. HOT SLC
01/M50VMQ[1] [2] C. HOT SLC
01/M60VMQ[1] [2] C. HOT SLC
01/M70VMQ[1] [2] C. HOT SLC
01/N50VMQ[1] [2] C. HOT SLC
01/N60VMQ[1] [2] C. HOT SLC
01/N70VMQ[1] [2] C. HOT SLC

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[3] Certified for a maximum surface area to volume ratio of 0.75 sq. in./L.
[4] This product has been evaluated for use in Mechanical Plumbing Device applications with
    a maximum use restriction of 0.65 sq. in/L.
[5] Certified for a maximum surface area to volume ratio of 0.5 sq. in./L.
[6] Certified for a maximum surface area to volume ratio of 10.0 sq. in./L.
[7] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 10 sq. in./L.



 
Lopigom SRL 
Via Rossini, 11 
24060 Credaro (BG) 
Italy 
39 03 592 7098


Facility : Credaro (BG), Italy

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Gasket/Sealing Materials
SI602/AL [1] C. HOT SLC

[1] Certified for a maximum surface area to volume ratio of 2.0 square inches/L.

O-Rings
SI602/AL [1] C. HOT SLC

[1] Certified for a maximum surface area to volume ratio of 2.0 square inches/L.

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.


 
Minnesota Rubber and Plastics 
1100 Xenium Lane North
Plymouth, MN 55441 
United States 
800-927-1422 
952-927-1400
Visit this company's website


Facility : Litchfield, MN

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Gasket/Sealing Materials
76155 [1] C. HOT SLC
76156 [1] C. HOT SLC
76157 [1] C. HOT SLC
76187D [1] C. HOT SLC

[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[2] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum surface area to volume ratio of 2.0 sq. in./L.
[3] This product was also evaluated for use in Mechanical Plumbing Device applications with
    a maximum use restriction of 3.0 sq. in./L.
[4] Certified for a maximum surface area to volume ratio of 14.0 square inches/L.
[5] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 1.0 sq. in./L.
[6] Certified for a maximum surface area to volume ratio of 4.0 sq. in./L.
[7] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 8 sq. in./L.
[8] Certified for a maximum surface area to volume ratio of 14 sq. in./L.
[9] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 4 sq. in./L.
[10] This product has also been evaluated for use in Mechanical Plumbing Device applications
     with a maximum use restriction of 1.5 sq. in./L.
[11] This product has also been evaluated for use in Mechanical Plumbing Device applications
     with a maximum use restriction of 4 square inches/L.

O-Rings
76187D [1] C. HOT SLC

[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[2] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum surface area to volume ratio of 2.0 sq. in./L.
[4] Certified for a maximum surface area to volume ratio of 14.0 square inches/L.
[11] This product has also been evaluated for use in Mechanical Plumbing Device applications
     with a maximum use restriction of 4 square inches/L.

NOTE: Only products manufactured at an NSF authorized facility and bearing the NSF Mark are
      considered Certified.


Facility : Guangdong, China

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Gasket/Sealing Materials
217AB[1] [2] C. HOT SLC
76155 [3] C. HOT SLC
76156 [3] C. HOT SLC
76157 [3] C. HOT SLC

[1] This product has been evaluated for use in Mechanical Plumbing Device applications with
    a maximum use restriction of 4.0 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 4.0 sq. in./L.
[3] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.



Facility : Jiangsu, China

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Gasket/Sealing Materials
71105B[2] [1] CLD 23 SLC
76155 [1] C. HOT SLC
76156 [1] C. HOT SLC
76157 [1] C. HOT SLC

[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[2] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 sq. in./L.
[3] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 4.0 sq. in./L.
[4] Certified for a maximum surface area to volume ratio of 14.0 sq. in./L.
[5] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 8.0 sq. in./L.
[6] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 1.0 sq. in./L.
[7] Certified for a maximum surface area to volume ratio of 4.0 sq. in./L.
[8] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 1.5 sq. in./L.



Facility : Reynosa, Tamaulipas, Mexico

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Gasket/Sealing Materials
71105B[2] [1] CLD 23 SLC

[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[2] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 sq. in./L.
[3] This product was also evaluated for use in Mechanical Plumbing Device applications with
    a maximum use restriction of 4.0 sq. in./L.
[4] Certified for a maximum surface area to volume ratio of 14.0 sq. in./L.
[5] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 1.0 sq. in./L.
[6] Certified for a maximum surface area to volume ratio of 4.0 sq. in./L.
[7] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.5 sq. in./L.
[8] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.5 sq. in./L.
[9] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 1.5 sq. in./L.
[10] This product has also been evaluated for use in Mechanical Plumbing Device applications
     with a maximum use restriction of 4 square inches/L.

NOTE: Only products manufactured at an NSF authorized facility and bearing the NSF Mark are
      considered Certified.


 
Novagard Solutions™, Inc. 
5109 Hamilton Avenue
Cleveland, OH 44114 
United States 
800-380-0138 
216-881-8111


Facility : Cleveland, OH

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Lubricants
G-662 Silicone Compound >= 1/2" C. HOT SLC



 
Parco, Inc. 
1801 South Archibald Avenue
Ontario, CA 91761 
United States 
909-947-2200


Facility : Yilan, Taiwan

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Gasket/Sealing Materials
1225-40[2] [1] C. HOT SLC
1225-70[2] [1] C. HOT SLC
1229-60[2] [1] C. HOT SLC

[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[2] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum surface area to volume ratio of 2.0 sq. in./L.
[3] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.2 sq. in./L.
[4] Certified for a maximum surface area to volume ratio of 1.6 sq. in./L.
[5] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.1 sq. in./L.
[6] Certified for a maximum surface area to volume ratio of 1.3 sq. in./L.



 
Polysi Technologies, Inc. 
5108 Rex McLeod Drive
Sanford, NC 27330 
United States 
919-775-4989
Visit this company's website


Facility : Sanford, NC

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Lubricants
PST-599 >= 1/2" C. HOT SLC



PremierRepak, lnc. 
8351 185th Street
Tinley Park, IL 60487 
United States 
855-737-2500 


Facility : # 1 USA

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Lubricants
PR 5501 - High Consistency Silicone Valve and Oring Lubricant >= 1/2" C. HOT SLC
Shurjoint EHC Lubricant, part #5172840064 >= 1/2" C. HOT SLC



 
RPM Products 
Rubber Plastics & Metal Products Inc.
23272 Arroyo Vista 
Rancho Santa Margarita, CA 92688 
United States 
949-888-8543
Visit this company's website


Facility : Yilan, Taiwan

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Gasket/Sealing Materials
SI60-61-2[7] [3] C. HOT SLC
SI70-61-2[7] [3] C. HOT SLC
SI80-61-2[7] [3] C. HOT SLC

[1] Certified for a maximum surface area to volume ratio of 1.6 sq. in./L.
[2] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum surface area to volume ratio of 0.2 sq. in./L.
[3] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[4] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.1 sq. in./L.
[5] Certified for a maximum surface area to volume ratio of 1.3 sq. in./L.
[6] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum surface area to volume ratio of 2.0 sq. in./L.
[7] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum surface area to volume ratio of 0.15 sq. in./L.



 
RT Dygert 
2700 South River Road
Suite 116 
Des Plaines, IL 60018 
United States 
800-423-9272 
847-675-1444
Visit this company's website


Facility : Yilan, Taiwan

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Gasket/Sealing Materials
S-4005[4] [1] C. HOT SLC
S-6004[4] [1] C. HOT SLC
S-7008[4] [1] C. HOT SLC
S-8002[4] [1] C. HOT SLC

[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[2] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum surface area to volume ratio of 0.2 sq. in./L.
[3] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 1.1 sq. in./L.
[4] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum surface area to volume ratio of 2.0 sq.in./L.
[5] Certified for a maximum surface area to volume ratio of 1.6 sq. in./L.



 
RT Dygert 
2700 South River Road
Suite 116 
Des Plaines, IL 60018 
United States 
847-675-1444
Visit this company's website


Facility : # 1 China

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Gasket/Sealing Materials
S-7004 [1] C. HOT SLC

[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 1.3 sq. in./L.
[3] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum surface area to volume ratio of 2.0 sq. in./L.
[4] Certified for a maximum surface area to volume ratio of 1.6 sq. in./L.
[5] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum surface area to volume ratio of 0.1 sq. in./L.

O-Rings
S-7004 [1] C. HOT SLC

[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 1.3 sq. in./L.
[3] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum surface area to volume ratio of 2.0 sq. in./L.
[4] Certified for a maximum surface area to volume ratio of 1.6 sq. in./L.
[5] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum surface area to volume ratio of 0.1 sq. in./L.



 
RT Dygert 
2700 South River Road
Suite 116 
Des Plaines, IL 60018 
United States 
800 423 9272 
847 675 1444
Visit this company's website


Facility : # 1 Vietnam

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Gasket/Sealing Materials
S-7025[1] [2] C. HOT SLC

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[3] This product has also been evaluated for use in Mechanical Plumbing Device application
    with a maximum use restriction of 0.4 sq. in./L.
[4] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.1 sq. in./L.
    

O-Rings
S-7025[1] [2] C. HOT SLC

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[3] This product has also been evaluated for use in Mechanical Plumbing Device application
    with a maximum use restriction of 0.4 sq. in./L.
[4] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.1 sq. in./L.
    



 
Satori Seal Corporation 
8455 Utica Avenue
Rancho Cucamonga, CA 91730 
United States 
800-322-8366 
909-987-8234
Visit this company's website


Facility : # 1 Vietnam

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Gasket/Sealing Materials
S6012F-00[3] [2] C. HOT SLC

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.1 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[3] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 sq. in./L.
[4] This product has also been evaluated for use in Mechanical Plumbing Device application
    with a maximum use restriction of 0.4 sq. in./L.

O-Rings
S6012F-00[3] [2] C. HOT SLC

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.1 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[3] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 sq. in./L.
[4] This product has also been evaluated for use in Mechanical Plumbing Device application
    with a maximum use restriction of 0.4 sq. in./L.



 
Satori Seal Corporation 
8455 Utica Avenue
Rancho Cucamonga, CA 91730-3809 
United States 
800-322-8366 
909-987-8234
Visit this company's website


Facility : Yilan City, Taiwan

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Gasket/Sealing Materials
S4015[9] [10] C. HOT SLC
S6015[9] [10] C. HOT SLC
S7015[9] [10] C. HOT SLC
S8015[9] [10] C. HOT SLC

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.2 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 2.0 square inches per liter.
[3] This product is also evaluated for use in Mechanical Plumbing Device applications with a
    maximum use restriction of 1.1 square inches/L.
[4] Certified for a maximum surface area to volume ratio of 0.4 sq. in./L.
[5] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.1 sq. in./L.
[6] Certified for a maximum surface area to volume ratio of 1 square inches/L.
[7] This product shall also be evaluated for use in Mechanical Plumbing Device applications
    with a maximum surface area to volume ratio of 0.8 sq.
[8] Certified for a maximum surface area to volume ratio of 1.6 sq. in./L.
[9] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.15 square inches/L.
[10] Certified for a maximum surface area to volume ratio of 1.5 square inches/L.



 
Superior Seals Ltd. 
8, Nimrod Way
Ferndown Industrial Estate 
Wimborne, Dorset BH21 7SH 
United Kingdom 
44 120 285 4300


Facility : # 1 United Kingdom

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Gasket/Sealing Materials [G]
S350 [5] C. HOT SLC

[1] Certified for a maximum surface area to volume ratio of 5.5 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[3] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 sq. in./L.
[4] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.8 sq. in./L.
[5] Certified for a maximum surface area to volume ratio of 7.27 sq. in./L.
[6] Has been evaluated for use in submersible pumps as check valve seats, seal rings,
    bearings and o-rings.
[7] Certified for a maximum surface area to volume ratio of 2.2 sq. in./L.
[8] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 5.5 sq. in./L.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



Facility : # 2 United Kingdom

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Gasket/Sealing Materials [G]
S350 [5] C. HOT SLC
SIL70 RED [2] C. HOT SLC

[1] Certified for a maximum surface area to volume ratio of 5.5 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[3] Certified for a maximum surface area to volume ratio of 9.5 sq. in./L.
[4] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 sq./in./L.
[5] Certified for a maximum surface area to volume ratio of 7.27 sq. in./L.
[6] Has been evaluated for use in submersible pumps as check valve seats, seal
    rings, bearings and o-rings.
[7] Certified for a maximum surface area to volume ratio of 2.2 sq. in./L.
[8] Certified for a maximum surface area to volume ratio of 4.5 sq. in./L.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

O-Rings [G]
SIL70 RED [2] C. HOT SLC

[1] Certified for a maximum surface area to volume ratio of 5.5 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[3] Certified for a maximum surface area to volume ratio of 9.5 sq. in./L.
[4] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 sq./in./L.
[7] Certified for a maximum surface area to volume ratio of 2.2 sq. in./L.
[8] Certified for a maximum surface area to volume ratio of 4.5 sq. in./L.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Tecnogomma International Spa 
Via Castello, 46
24060 Adrara San Martino (BG) 
Italy 
39 035 933095
Visit this company's website


Facility : Palazzolo Sull'Oglio, Italy

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Gasket/Sealing Materials
TEC S27 R.-60 Rosso [1] C. HOT SLC

[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.

O-Rings
TEC S27 R.-60 Rosso [1] C. HOT SLC
TEC S27 R.-70 Red [1] C. HOT SLC

[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.

[2] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 sq. in./L.


 
Trelleborg Sealing Solutions US Inc. 
2509 Bremer Road
Fort Wayne, IN 46803 
United States 
800-323-0496 
260-749-9631


Facility : Shanghai, China

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Gasket/Sealing Materials
S6W12[5] [G] [1] C. HOT SLC
S7W11[5] [G] [1] C. HOT SLC

[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[2] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 1.5 sq. in./L.
[3] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.9 sq. in./L.
[4] Certified for a maximum surface area to volume ratio of 1 sq. in./L.
[5] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 sq. in./L.
[6] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.2 sq. in./L.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

O-Rings
S6W12[5] [G] [1] C. HOT SLC
S7W11[5] [G] [1] C. HOT SLC

[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[2] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 1.5 sq. in./L.
[3] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.9 sq. in./L.
[5] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 sq. in./L.
[6] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.2 sq. in./L.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Trelleborg Sealing Solutions US Inc. 
2509 Bremer Road
Fort Wayne, IN 46803 
United States 
800-323-0496 
260-748-5774


Facility : Zhongshan City, China

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Gasket/Sealing Materials
S7W03 [3] C. HOT SLC

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum surface area to volume ratio of 0.1 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 1.3 sq. in./L.
[3] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[4] This product has also been evaluated for use in Mechanical Plumbing Device
    applications with a maximum surface area to volume ratio of 2.0 sq. in./L.
[5] Certified for a maximum surface area to volume ratio of 1.6 sq. in./L.

O-Rings
S7W03 [3] C. HOT SLC

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum surface area to volume ratio of 0.1 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 1.3 sq. in./L.
[3] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[4] This product has also been evaluated for use in Mechanical Plumbing Device
    applications with a maximum surface area to volume ratio of 2.0 sq. in./L.
[5] Certified for a maximum surface area to volume ratio of 1.6 sq. in./L.



 
Tribology Tech-Lube 
35 Old Dock Road
Yaphank, NY 11980 
United States 
800-569-1757 
631-345-3000


Facility : Yaphank, NY

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Lubricants[G]
Gruvlok Xtreme Lubricant™ >= 1/2" C. HOT SLC

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Tuico Products Joint-Stock Company 
Plot 1-16, Ho Nai Industrial Zone
Trang Bom District 
Dong Nai Province 
Vietnam 
84 613 671222
Visit this company's website


Facility : # 1 Vietnam

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Gasket/Sealing Materials
4100-70 Silicone[3] [2] C. HOT SLC

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.1 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[3] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 sq. in./L.
[4] This product has also been evaluated for use in Mechanical Plumbing Device application
    with a maximum use restriction of 0.4 sq.in./L.

O-Rings
4100-70 Silicone[3] [2] C. HOT SLC

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.1 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[3] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 sq. in./L.
[4] This product has also been evaluated for use in Mechanical Plumbing Device application
    with a maximum use restriction of 0.4 sq.in./L.



 
Xiamen Jinshun Rubber Plastic Co., Ltd. 
No. 26-27, Siming Industrial Zone
Meixidao, Tong'an District 
Xiamen City, Fujian 361100 
China 
86 592 7155518
Visit this company's website


Facility : Fujian, China

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Gasket/Sealing Materials
50SIL310P[1] [4] C. HOT SLC
SILICONE 6650[1] [4] C. HOT SLC

[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[2] Evaluated for use in Mechanical Plumbing devices with a maximum surface area to volume
    ratio of 0.9 sq. in./L.
[3] This product has also been evaluated for use in Mechanical Plumbing device applications
    with a maximum use restriction of 0.30 sq. in./L.
[4] This product has also been evaluated for use in Mechanical Plumbing device applications
    with a maximum use restriction of 2.0 sq. in./L.

O-Rings
50SIL310P[1] [4] C. HOT SLC
SILICONE 6650[1] [4] C. HOT SLC

[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[2] Evaluated for use in Mechanical Plumbing devices with a maximum surface area to volume
    ratio of 0.9 sq. in./L.
[3] This product has also been evaluated for use in Mechanical Plumbing device applications
    with a maximum use restriction of 0.30 sq. in./L.
[4] This product has also been evaluated for use in Mechanical Plumbing device applications
    with a maximum use restriction of 2.0 sq. in./L.



 
Xiamen Maifeng Seal Products Co., Ltd. 
No. 2288 Tongan Avenue
Tongan Region, Xiamen City 
Fujian 361100 
China 
86 592 7111403
Visit this company's website


Facility : Fujian, China

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Gasket/Sealing Materials[1]
S7008F [2] C. HOT SLC
SIL 6008F [2] C. HOT SLC

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 sq. in./L.
[2] Certification for a maximum surface area to volume ratio of 2.0 sq. in./L.

O-Rings[1]
S7008F [2] C. HOT SLC
SIL 6008F [2] C. HOT SLC

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 sq. in./L.
[2] Certification for a maximum surface area to volume ratio of 2.0 sq. in./L.



 
Xiamen Maihua Rubber Products Co., Ltd. 
No.36, Dapu Road, Fengnan
Tong'an District, Xiamen 
Fujian 361121 
China 
86 592 578 2903
Visit this company's website


Facility : Xiamen, China

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Gasket/Sealing Materials
SIL6010[1] [2] C. HOT SLC

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[3] Certified for a maximum surface area to volume ratio of 2.0 sq.in./L for pipes and tanks.

O-Rings
SIL6010[1] [2] C. HOT SLC

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[3] Certified for a maximum surface area to volume ratio of 2.0 sq.in./L for pipes and tanks.



 
Yaw Yew Rubber Co., Ltd. 
No. 49-8 Fan-She Village
Fu-Shing, Hsiang 
Chang Hua 
Taiwan 
886 4 7783390
Visit this company's website


Facility : Chang Hua, Taiwan

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Gasket/Sealing Materials
SI5678[1] <= 50.0 sq. in./L C. HOT SLC

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 5.0 sq. in./L.


Number of matching Manufacturers is 38
Number of matching Products is 204
Processing time was 6 seconds