NSF Product and Service Listings

These NSF Official Listings are current as of Friday, October 31, 2014 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?TradeName=flo&



NSF/ANSI 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings.


 
3M Purification Inc. (formerly Cuno, Incorporated) 
400 Research Parkway
Meriden, CT 06450 
United States 
651-733-0587
Visit this company's website

Facility : Juarez, Chihuahua, Mexico

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Microfiltration Devices
High Flow Filter Element (HF-WW-PP-XXX-Y-Z)[5] [4] CLD 23 MLTPL

[1] Q - Filter construction
        B - Maximum filter area
        K - Optimized filter area
    RR - Length
         30 - 30" nominal
         40 - 40" nominal
    SS - Material
         PP - Polypropylene
    XXX - Micron grade
          001 - 1 micron
          002 - 2 micron
          005 - 5 micron
          010 - 10 micron
          015 - 15 micron
    Y - Gasket material
        C - EPDM
        D - Nitrile
    Z - Packaging
        1 - 1 per case
        2 - 18 per case
        3 - 28 per case
        4 - 29 per case
        5 - 30 per case
        6 - 37 per case
[2] Certified for a minimum flow rate of 55,000 L/day.
[3] XX - Length
         10 - 10" nominal
         40 - 40" nominal
         60 - 60" nominal
    YY - Material
         PP - Polypropylene
    ZZZ - Micron Grade
          N05 - 5 micron
    Q - Gasket material
        D - Nitrile
    Size: Filter elements are 40" or 60" long and 6.5" in diameter.
[4] Certified for a minimum flow of 65,000 L/day.
[5] WW - Length of cartridge, in inches
         40
         60
    XXX - Removal rating
          001 - 1 micron
          002 - 2 micron
          005 - 5 micron
          010 - 10 micron
          015 - 15 micron
          025 - 25 micron
          040 - 40 micron
          070 - 70 micron
    Y - End o-ring type
        A - Silicone
        B - Fluorocarbon
        C - EPR
        D - Nitrile
    Z - Packaging option (number of filters per box)
        01 - 1 pack
        04 - 4 pack

NOTE: NSF has not conducted production control audits at this facility.  Product Listing is
      based on type testing [ISO/IEC Guide 2: 1996(E/F/R) 14.5].


 
AMERICAN Flow Control 
1501 North 31st Avenue
Birmingham, AL 35207 
United States 
800-326-8051 
205-325-7856
Visit this company's website

Facility : Conway, AR

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[1] [2] [G]
American Flow Control Series 2500 Resilient Wedge Gate Valve (25YY) NRS 2" - 3", 14" - 16" CLD 23 MLTPL
American Flow Control Series 2500 Resilient Wedge Gate Valve (25YY) OS&Y 14" - 16" CLD 23 MLTPL
American Flow Control Series 2500-1 Resilient Wedge Gate Valve (25XX-1) NRS 4" - 12" CLD 23 MLTPL
American Flow Control Series 2500-1 Resilient Wedge Gate Valve (25XX-1) OS&Y 4" - 12" CLD 23 MLTPL

[1] XX and YY refer to the size in inches.
[2] Certified for use in distribution systems only.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Facility : South St. Paul, MN

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves [G]
American Flow Control Series 2500 Resilient Wedge Gate Valve (25YY) NRS[3] [4] 2" - 3", 14" - 30" CLD 23 MLTPL
American Flow Control Series 2500 Resilient Wedge Gate Valve (25YY) OS&Y[3] [4] 2" - 3", 14" - 24" CLD 23 MLTPL
American Flow Control Series 2500-1 Resilient Wedge Gate Valve (25XX-1) NRS[3] [4] 4" - 12" CLD 23 MLTPL
American Flow Control Series 2500-1 Resilient Wedge Gate Valve (25XX-1) OS&Y[3] [4] 4" - 12" CLD 23 MLTPL

[1] XX refers to size and may be 03, 04, 06, 08, 10 or 12.
[2] Certified for standard and outside shaft models.
[3] XX and YY refers to the size in inches.
[4] Certified for use in distribution systems only.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Facility : Beaumont, TX

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves [G]
American Flow Control Series 2100 Resilient Seat Swing Check Valve (21XX)[2] [3] 3" - 16" CLD 23 MLTPL
American Flow Control Series 2500 Resilient Wedge Gate Valve (25YY) OS&Y[4] 14" - 24" CLD 23 MLTPL
American Flow Control Series 2500 Resilient Wedge Gate Valve (25YY) NRS[4] 14" - 66" CLD 23 MLTPL
American Flow Control Series 2500-1 Resilient Wedge Gate Valve (25XX-1) NRS[5] 4" - 12" CLD 23 MLTPL

[2] XX refers to the size of the valve in inches and may be 03, 04, 06, 08, 10, 12, 14, or
    16.
[3] Certified for use in distribution systems only.
[4] YY represents size in inches and may be 14, 16, 18, 20, 24, 30, 36, 42, 48, 54, 60, or
    66.
[5] XX represents size in inches and may be 04, 06, 08, 10, or 12.
[6] The Swing Check Valve - Series 52 SC may use a "lever and weight" or "lever and spring"
    option.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Ames Fire & Waterworks, a Watts Water Technologies Co. 
1485 Tanforan Avenue
Woodland, CA 95776 
United States 
530-666-2493

Facility : Woodland, CA

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Backflow Preventers[1] [G]
C200-X-YY-ZZ-TT 2 1/2" - 10" CLD 23 MLTPL
C200a-X-YY-ZZ-TT 2 1/2" - 10" CLD 23 MLTPL
C400-X-YY-ZZ-TT 2 1/2" - 10" CLD 23 MLTPL
C400a-X-YY-ZZ-TT 2 1/2" - 10" CLD 23 MLTPL
M200-X-YY-ZZ-TT 2 1/2" - 10" CLD 23 MLTPL
M200a-X-YY-ZZ-TT 2 1/2" - 10" CLD 23 MLTPL
M400-X-YY-ZZ-TT 2 1/2" - 10" CLD 23 MLTPL
M400a-X-YY-ZZ-TT 2 1/2" - 10" CLD 23 MLTPL

[1] X - Valve pattern
        Blank - Straight
        N - N pattern
        Z - Z pattern
    YY - Backflow shutoff designation where 2 per units may be mixed like NRS x PIV 
         BFG  - Butterfly valve
         DNRS - Domestic non-rising stem gate
         DOSY - Domestic outside stem and yoke gate
         DPIV - Domestic post indicator gate
         NRS  - Non-rising stem gate
         OSY  - Outside stem and yoke gate
         PIV  - Post indicator gate
         QT   - Quarter turn ball valve
    ZZ - Inlet and outlet connections
         Blank - Flange by flange
         FxG - Flange by groove 
         GxF - Groove by flange
         GxG - Groove by groove
    TT - Strainer options
         Blank - No strainer
         S - 77F-DI-FDA-125 strainer
         S - SS Stainless Strainer 8000F
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Ames Fire & Waterworks, a Watts Water Technologies Co. 
1485 Tanforan Avenue
Woodland, CA 95776 
United States 
530-666-2493

Facility : Franklin, NH

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Backflow Preventers [1] [G]
LF-2000B[1] 1/2" CLD 23 MLTPL
LF-2000B[1] 2" CLD 23 MLTPL
LF-2000B[1] 1 1/2" CLD 23 MLTPL
LF-2000B[1] 1 1/4" CLD 23 MLTPL
LF-2000B[1] 1" CLD 23 MLTPL
LF-2000B[1] 3/4" CLD 23 MLTPL
LF-4000B[1] 1/2" CLD 23 MLTPL
LF-4000B[1] 2" CLD 23 MLTPL
LF-4000B[1] 1 1/2" CLD 23 MLTPL
LF-4000B[1] 1 1/4" CLD 23 MLTPL
LF-4000B[1] 1" CLD 23 MLTPL
LF-4000B[1] 3/4" CLD 23 MLTPL
LF200B[2] 1/2" - 2" CLD 23 MLTPL
LF400B[2] 1/2" - 2" CLD 23 MLTPL

[1] LF - Lead free
[1] LF - Lead free
[2] Products may include one or more of the following prefixes or suffixes:
    S              - Lead Free Strainer
    LF (as prefix) - Lead free
    LF (as suffix) - Less fitting
    QT             - Quarter turn ball valve
    Options for non-wetted:
    C & T - Cap and tether test cock covers
    LH    - Locking handled ball valves
    SH    - Stainless handled ball valves
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Amiantit Fiberglass Industries Limited 
P.O. Box 589 
Dammam 31421 
Saudi Arabia 
966 847 1500

Facility : Damman, Saudi Arabia

Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Pipe[1]
Flowtite Epoxy Pipe 300mm - 2000mm C. HOT TSRE

[1] Only products bearing the NSF Mark are Certified.



 
Anvil International, LLC 
2 Holland Way
Exeter, NH 03833 
United States 
603-418-2800

Facility : Columbia, PA

Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings
1190 GALV FLOOR FLANGE 1/2 - 2[G] 1/2" - 2" CLD 23 GALV
1190 GALV MI FLOOR FLANGE 2 1/2 - 3[G] 2 1/2" - 3" CLD 23 GALV

[1] 1/8" x 1/8" x 1/8" - 6" x 6" x 4"
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
ARI Flow Control Accessories 
Kibbutz Kfar Charuv 12932
Israel 
972 6 676 1980
Visit this company's website

Facility : Kibbutz Kfar Charuv, Israel

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Backflow Preventers[G]
DC 500 1/2" - 2" CLD 23 MLTPL
RP 500 1/2" - 2" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Badger Meter, Inc. 
4545 West Brown Deer Road
Milwaukee, WI 53223 
United States 
414-371-5744
Visit this company's website

Facility : Neuffen, Germany

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Water Meters
MagnetoFlow® 7500P[1] [G] 1/2" - 4" CLD 23 MLTPL
MagnetoFlow® Flanged[1] [G] 1/2" - 54" CLD 23 MLTPL
MagnetoFlow® Mag Meter 7500P[1] [G] 1/2" - 4" CLD 23 MLTPL
MagnetoFlow® Mag Meter Flanged[1] [G] 1/2" - 54" CLD 23 MLTPL
MagnetoFlow® Mag Meter Wafer[1] [G] 1" - 4" CLD 23 MLTPL
MagnetoFlow® Wafer[1] [G] 1" - 4" CLD 23 MLTPL

[1] Product also complies with NSF/ANSI 372.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.


 
BASF Construction Chemicals 
23700 Chagrin Boulevard
Cleveland, OH 44122 
United States 
800-628-9990 
216-839-7000
Visit this company's website

Facility : Streetsboro, OH

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Grouts
Masterflow 928 [1] CLD 23 CMNT
Masterflow® 1515 Pipesaver[2] [3] CLD 23 CMNT

[1] Certified for 25% of a tank 100 gallons and greater.
[2] Pipelines containing grout used to adhere repair lines must undergo a flush of 3-5
    gallons/minute for 1 hour prior to being placed back into service.
[3] Certified for use as a grout to adhere in-situ repair liners to potable water pipelines
    4" - 12" in diameter.  Certified for a maximum surface area to volume ratio of 0.3 sq.
    in./L.


Facility : Houston, TX

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Patching Materials
Masterflow 928 [3] CLD 23 CMNT

[1] Certified for 10% coverage of a tank 200,000 gallons or greater and 5% of a pipe 84
    inches or greater.
[2] Certified for use with pipes 20" and greater or tanks 1,000 gallons and greater.
[3] Certified for 25% of a 100 gallon tank and greater.



 
Blue-White Industries, Ltd. 
5300 Business Drive
Huntington Beach, CA 92649 
United States 
714-893-8529
Visit this company's website

Facility : Huntington Beach, CA

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Chemical Metering Pumps
FLEX-FLO® A1Nabc-de-f-ghij[3] [4] 1/4" - 7/16" CLD 23 MLTPL

[1] A - Series
        2 - Smaller overall size (width and length)
        3 - Larger overall size (width and length)
    B - Maximum strokes per minute
    C - Input voltage/power cord
    D - Stroke length/diaphragm size
        1 - .060" stroke/small diaphragm (MC-2) or .060" stroke/large diaphragm (MC-3)
        2 - .060" stroke/large diaphragm (MC-2) or .100" stroke/large diaphragm (MC-3)
        3 - .040" stroke/small diaphragm (MC-2)
        4 - .100" stroke/large diaphragm (MC-2)
        5 - .040" stroke/low flow diaphragm (MC-2)
        6 - .060" stroke/low flow diaphragm (MC-2)
    E - Electrical options
    F - Elastomer material (o-rings)
    V - FKM & T/FEP
    E - EP
    G - Pump head fitting and foot valve
        1 - 1/2" ID x 3/4" OD tubing pump head with 1/2" barb hose footvalve
        2 - 1/4" ID x 3/8" OD tubing pump head with 1/4" foot valve
        3 - 1/2" male NPT inlet and outlet with 1/2" M/NPT footvalve
        4 - 1/2" female NPT inlet and outlet with 1/2" M/NPT footvalve
    H - Miscellaneous options (may be blank)
        A - Hastelloy C check valve balls, PTFE prime valve ball
        B - Single 1/2" ceramic ball and Hastelloy C spring P/head check valve for viscous 
            fluids
        -C1/-C2/-C3/-C4/-C5 - Communications interface
    H - PTFE balls (double ball check valve, prime valve) low viscosity/density fluids 
        only
    J - PTFE balls (single ball with Hastelloy spring check valve, prime valve)
[2] Certified for use with 12.5% sodium hypochlorite or 33% hydrochloric acid. These
    products are evaluated by diluting the exposed water treatment chemical to its maximum
    use level (MUL), as defined in NSF/ANSI Standard 60.
[3] Certified for use with 12.5% sodium hypochlorite (Norprene tubing) or 33% hydrochloric
    acid (Norprene Chemical tubing). These products are evaluated by diluting the exposed
    water treatment chemical to its maximum use level (MUL), as defined in NSF/ANSI Standard
    60.
[4] FLEX-FLO® 
    a - 0, 1, 2, or 3 
    b - 0, 1, 2, 5, 6, 7, or 8 
    c - A, P, S, C, E, F, V, X or * 
    d - 4, 6, 7 or 8 
    e - T 
    f - X 
    g - any number 1 through 99 
    h - S M, H or D 
    i - any number 1 through 99 
    j - S M, H or D
[5] FLEX-PRO® 
    a - 2, 3, or 4 
    b - 1,2,3,4, or 5 
    c - 4,5,6,8 or X 
    d - S, M, B, C or X 
    e - ND, NF, NH, NJ, NK, NL, NP, NKL, TH, TK or NKL 
    f - R, D, or blank

Water Meters[6]
Sonic-Pro Ultra Sonic Flow Meter S4-(1)-(2)-C-(3)-(4)-(5)-(6)-G 1/2" - 2" C. HOT MLTPL

[6] Also Certified for equivalent metric sizes.
    (1) Communication & Control options, may be any value
    (2) Power supply cord, may be any value
    (3) Cable length and transducer connection type, may be any value
    (4) Fluid Speed of Sound, may be any value
    (5) Size, as follows:
        05 - 1/2"
        07 - 3/4"
        10 - 1"
        15 - 1 1/2"
        20 - 2"
        21 - 20 mm
        26 - 25 mm
        32 - 32 mm
        41 - 40 mm
        50 - 50 mm
    (6) Pipe connection type & material, may be any value



 
Cash Acme 
2400 7th Avenue Southwest
Cullman, AL 35055 
United States 
256-775-8186

Facility : Kibbutz Kfar Charuv, Israel

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Backflow Preventers[G]
DC 500 1/2" - 2" CLD 23 MLTPL
RP 500 1/2" - 2" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Component Hardware Group, Inc. 
1890 Swarthmore Avenue
P.O. Box 2020 
Lakewood, NJ 08701 
United States 
800-526-3694 
732-363-4700
Visit this company's website

Facility : Lakewood, NJ

Mechanical Plumbing Devices

Trade Designation      

Miscellaneous Faucet Components
KLF-0300-A Variable Flow Spray Head Repair Kit[G] [24]      
KLF-0300-B Variable Flow Spray Head Repair Kit[G] [24]      
KLF-0410-x Variable Flow Pre-Rinse Spray Kit[G] [22]      
KLF-Y104-x Variable Flow Pre-Rinse Spray Assembly[G] [23]      

[3] Optional exterior coating SANI-GUARD™.
[4] XXX denotes length of spout up to 28 inches.
[5] These models are NSF Certified faucet components.  The assembly of components does not
    constitute a NSF Certified faucet.  Complete faucet assemblies are NSF Certified only if
    the assembled faucet appears in NSF Listings.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    
[22] x - Spray tip
         A - S/S spray tip (.61/.7/1.2)
         B - S/S spray tip (.61/.7/1.5)
         C - Brass spray tip (.61/.7/1.2)
         D - Brass spray tip (.61/.7/1.5)
     *Note: Pre-Rinse Spray Kit comes complete with grip and adapters to fit other
     manufacturer's hoses.
[23] x - Spray tip
         A - S/S spray tip (.61/.7/1.2)
         B - S/S spray tip (.61/.7/1.5)
         C - Brass spray tip (.61/.7/1.2)
         D - Brass spray tip (.61/.7/1.5)
     *Note: Pre-Rinse Spray Assembly comes with spray tips less grip and adapters.
[24] x - Spray tip
         A - S/S spray tip (.61/.7/1.2)
         B - S/S spray tip (.61/.7/1.5)
         C - Brass spray tip (.61/.7/1.2)
         D - Brass spray tip (.61/.7/1.5)
     *Note: Spray Head Repair Kit comes with bezel, spray tips, center screw, O-ring,
     plunger, spring, washer, and button valve.

NOTE: Products Listed under the category of Commerical Kitchen and Bar Endpoint Devices are
      tested and Certified based upon their sole application being the delivery of water for
      high volume restaurant use or large batch food preparation.


 
Control Devices, LLC DBA Kerick Valve 
1555 Larkin Williams Road
Fenton, MO 63026 
United States 
904-732-2258
Visit this company's website

Facility : Jacksonville, FL

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves
HTI(A)(B)(C)(D)(E)(F) Float Valves[2] [G] [1] CLD 23 MLTPL
I(A)(B)(C)(D)(E)(F) Float Valves[2] [G] [1] CLD 23 MLTPL
M(A)(B)(C)(D)(E)(F) Float Valves[2] [G] [2] CLD 23 MLTPL
VTI(A)(B)(C)(D)(E)(F) Float Valves[2] [G] [1] CLD 23 MLTPL

[1] M, I, HT and VT Series Float Valves: 
    I  - I Series 
    M  - M Series 
    HT - Horizontal Tank 
    VT - Vertical Tank 
    (A) Valve type: 
        A     - Adjustable 
        blank - Non-adjustable 
    (B) Inlet size: 
        25 - 1/4" tubing inlet 
        2P - 1/4" pipe inlet 
        2S - 1/4" short pipe inlet 
        38 - 3/8" tubing inlet 
        3P - 3/8" pipe 
        05 - 1/2" pipe 
        I2 - Index 1/4" tubing 
        B2 - Bayonet 1/4" tubing 
        32 - 3/8" step 1/4" tubing 
        T5 - 1/2" tapped with 1/4" 
    (C) Material: 
        2 - HR 5009 
        7 - Polyfort FPP 1606-11 
        8 - Geon M4110 
    (D) Orifice size: 
        Blank - 0.093 #4 
        1  - .042 
        2  - .052 
        3  - .062 
        4  - .093 
        6  - .125 
        10 - .1719 
        12 - .188 
    (E) Float: 
        Blank - PF154-NT 
        AN - PF152-NT 
        AB - PF152-BK 
        IB - PF1525-BK 
        IN - PF1525-NT
        BN - PF153-NT 
        BB - PF153-BK 
        GB - PF154-BK 
        CN - PF1753-NT 
        CB - PF1753-BK 
        DN - PF222-NT 
        DB - PF222-BK 
        EN - PF224-NT 
        EB - PF224-BK 
        FN - PF1752-NT 
        FB - PF1752-BK 
        NT - Natural 
        BK - Black 
    (F) Arm: 
        Blank - Reg. Arm 
        S    - s-arm 
        IH00 - Hoz 0" drop 
        IH07 - Hoz .75" drop 
        IH12 - Hoz 1.2" drop 
        IH20 - Hoz 2" drop 
        IV01 - Vert 1" drop
[2] For all valves: 
    [2] May represent the following suffixes when present: 
        -316 - 316 grade stainless steel 
        -BMP - Bent pin 
        -R   - Reversed arm 
        -V   - Vertical 
        -P   - Polyfort FPP 1601-11 
        -G   - Geon 4M4110 TRANS 9492 
        -NT  - Natural (P Series only)
        -BK  - Black (P Series only)
[5] P Series Valves: 
    (I) Mount: 
        S - Standard 
        T - Tank 
        X - Extended 
    (J) Inlet size: 
        38  - 3/8" 
        05  - 1/2" 
        75  - .75" 
        100 - 1" 
        125 - 1.25" 
        150 - 1.5" 
    (K) Outlet size: 
        38 - 3/8" 
        05 - 1/2" 
        Blank - Inlet size 
    (L) Orifice size: 
        L   - Low flow 
        S   - Standard flow 
        187 - .187" 
        25  - .25" 
        312 - .312" 
    (M) Trim hardware: 
        S - Stainless
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Dicalite Minerals Corp. 
36994 Summit Lake Road
Burney, CA 96013 
United States 
800-545-6408 
530-335-5451
Visit this company's website

Facility : Burney, CA

Process Media

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Diatomaceous Earth[1]
Dicalite® SPEEDFLOW 1 µm - 200 µm CLD 23 DE

[1] Certified for a maximum use level of 5,000 mg/L.

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.
NOTE: Certified for water treatment plant applications.
      This product has not been evaluated for point of use applications.


 
Dow Chemical Company (The) 
1803 Building
Midland, MI 48674 
United States 
989-638-6231

Facility : Zhejiang, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Ultrafiltration Devices
DOW IntegraFlo™ DW102-1100[6] 8" x 80" CLD 23 MLTPL
DOW IntegraFlo™ DW74-1100[6] 8" x 60" CLD 23 MLTPL

[1] Certified for a minimum daily flow of 18,612 L.
[2] Size is expressed as diameter x length.
[3] The Fiber Repair Kit has been approved for use with these modules.
[4] Also Certified for equivalent metric sizes.
[5] Size:
    IPD-51 Module (8" x 60")
    IPD-77 Module (8" x 80")
    The last number in the model designation refers to the number of modules in the skid.
[6] Certified for a minimum daily flow of 72,000 L.



 
Durman Esquivel S.A. 
Zona Franca Propark
Contiguo a La Dos Pinos 
El Coyol De Alajuela 
Costa Rica 
506-436-4700

Facility : Querétaro, Mexico

Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Pipe
Durman Flowguard Gold Potable Water Tubing 1/2" - 2" C. HOT CPVC



 
EJ USA, Inc. 
301 Spring Street
P.O. Box 439 
East Jordan, MI 49727 
United States 
800-874-4100 
231-536-2261
Visit this company's website

Facility : East Jordan, MI

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[G]
Flowmaster Resilient Seated Gate Valve 4" - 16" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Elster Perfection 
436 North Eagle Street
Geneva, OH 44041 
United States 
440-415-1827
Visit this company's website

Facility : Geneva, OH

Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings
Clearflow Fittings >= 1/2" C. HOT PP



FEBCO, a Watts Water Technologies Co. 
815 Chestnut Street
North Andover, MA 01845 
United States 
800-767-1234 

Facility : # 1 USA

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Backflow Preventers[1] [G]
LF850(1)(2) 2 1/2" - 10" CLD 23 MLTPL
LF860(1)(2) 2 1/2" - 10" CLD 23 MLTPL
LF870V(1)(2) 2 1/2" – 10" CLD 23 MLTPL
LF880V(1)(2) 2 1/2" – 10" CLD 23 MLTPL

[1] Suffixes may consist of:
    (1) Isolation Shut-off Valve Options: 
        LG   - Assembly ships without isolation shut-off valves 
        NRS  - Non-rising stem 
        DNRS - Domestic non-rising stem 
        OSY  - Outside stem and yoke 
        DOSY - Domestic outside stem & yoke 
    (2) Installation Option: 
        LH - Test cocks mounted for right-to-left flow installation
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Facility : Ningbo, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Backflow Preventers[1] [2] [G]
LF850 1/2" - 2" CLD 23 MLTPL
LF860U 1/2" - 2" CLD 23 MLTPL
LF860 1/2" - 2" CLD 23 MLTPL
LF850U 1/2" - 2" CLD 23 MLTPL

[1] Products have a marking exemption which allow product NSF-61 Marking and labels bearing
    the <= 0.25%.
[2] Product may have box stickers or temporary tags with the following configuration
    descriptions:
    LF850 / LF850U: 
    QT - Quarter Turn Ball Valve 
    DC - Double Check Assembly 
    LF860 / LF860U: 
    QT  - Quarter Turn Ball Valve 
    RP  - Reduced Pressure Assembly 
    RPZ - Reduced Pressure Zone
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



FEBCO, a Watts Water Technologies Co. 
815 Chestnut Street
North Andover, MA 01845 
United States 
800-767-1234 

Facility : Woodland, CA

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Backflow Preventers[1] [G]
750-X-YY-ZZ-TT 2 1/2" - 10" CLD 23 MLTPL
760-X-YY-ZZ-TT 2 1/2" - 10" CLD 23 MLTPL

[1] X - Valve pattern 
        Blank - Straight 
        N - N pattern 
        Z - Z pattern 
    YY - Backflow shutoff designation: where 2 per units may be mixed like NRS x PIV 
         DNRS - Domestic Non-Rising Stem Gate 
         DPIV - Domestic Post Indicator Gate 
         DOSY - Domestic Outside Stem and Yoke Gate 
         BFG  - Butterfly 
    ZZ - Inlet and outlet connections 
         Blank - Flange by flange 
         FxG   -  Flange by groove 
         GxF   - Groove by flange 
         GxG   - Groove by groove 
    TT - Strainer options 
         Blank - No strainer 
         S - Strainer 77F-DI-FDA-125
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Ferguson Enterprises, Inc. 
12500 Jefferson Avenue
Newport News, VA 23602-4314 
United States 
757-874-7795

Facility : Jiangsu, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[G]
Ferguson / Proflo PFCBVD 1/2" C. HOT CPVC
Ferguson / Proflo PFCBVF 3/4" C. HOT CPVC
Ferguson / Proflo PFCBVG 1" C. HOT CPVC
Ferguson / Proflo PFCBVH 1 1/4" C. HOT CPVC
Ferguson / Proflo PFCBVJ 1 1/2" C. HOT CPVC
Ferguson / Proflo PFCBVK 2" C. HOT CPVC

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings[G]
Ferguson / Proflo PFCCCD 1/2" CLD 23 MLTPL
Ferguson / Proflo PFCCCF 3/4" CLD 23 MLTPL
Ferguson / Proflo PFP80SUD 1/2" CLD 23 PVC
Ferguson / Proflo PFP80SUG 1" CLD 23 PVC
Ferguson / Proflo PFP80SUH 1 1/4" CLD 23 PVC
Ferguson / Proflo PFP80SUJ 1 1/2" CLD 23 PVC
Ferguson / Proflo PFP80SUK 2" CLD 23 PVC
Ferguson / Proflo PSP80SUF 3/4" CLD 23 PVC

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Facility : Taichung, Taiwan

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[G]
Ferguson / Proflo PFCBVD 1/2" C. HOT MLTPL
Ferguson / Proflo PFCBVF 3/4" C. HOT MLTPL
Ferguson / Proflo PFCBVG 1" C. HOT MLTPL
Ferguson / Proflo PFCBVH 1 1/4" C. HOT MLTPL
Ferguson / Proflo PFCBVJ 1 1/2" C. HOT MLTPL
Ferguson / Proflo PFCBVK 2" C. HOT MLTPL

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings
Ferguson / Proflo PFCPCUD 1/2" C. HOT MLTPL
Ferguson / Proflo PFCPCUF 3/4" C. HOT MLTPL
Ferguson / Proflo PFCPFABTD 1/2" C. HOT MLTPL
Ferguson / Proflo PFCPFABTF 3/4" C. HOT MLTPL
Ferguson / Proflo PFCPFABTG 1" C. HOT MLTPL
Ferguson / Proflo PFCPFABTH 1 1/4" C. HOT MLTPL
Ferguson / Proflo PFCPFABTJ 1 1/2" C. HOT MLTPL
Ferguson / Proflo PFCPFABTK 2" C. HOT MLTPL
Ferguson / Proflo PFCPFDE9BD 1/2" C. HOT MLTPL
Ferguson / Proflo PFCPMABTD 1/2" C. HOT MLTPL
Ferguson / Proflo PFCPMABTF 3/4" C. HOT MLTPL
Ferguson / Proflo PFCPMABTG 1" C. HOT MLTPL
Ferguson / Proflo PFCPMABTH 1 1/4" C. HOT MLTPL
Ferguson / Proflo PFCPMABTJ 1 1/2" C. HOT MLTPL
Ferguson / Proflo PFCPMABTK 2" C. HOT MLTPL
Ferguson / Proflo PFCPTCFBD 1/2" C. HOT MLTPL
Ferguson / Proflo PFCPTCFBF 3/4" C. HOT MLTPL
Ferguson / Proflo PFCPTCMBD 1/2" C. HOT MLTPL
Ferguson / Proflo PFCPTCMBF 3/4" C. HOT MLTPL
Ferguson / Proflo PFP80SUL[G] 2 1/2" CLD 23 MLTPL
Ferguson / Proflo PFP80SUM[G] 3" CLD 23 MLTPL
Ferguson / Proflo PFP80SUP[G] 4" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Flomatic Corporation 
15 Pruyn's Island Drive
Glen Falls, NY 12081 
United States 
518-761-9797
Visit this company's website

Facility : D'Opaglio (NO), Italy

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Backflow Preventers
8080E 1/2", 3/4", 1" CLD 30 MLTPL



 
FlowCon International ApS 
Trafikcenter Allé 17
4200 Slagelse 
Denmark 
45 58 50 52 30
Visit this company's website

Facility : Slagelse, Denmark

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[1] [G]
Flowcon AHU Wafer F3860LBSSL 2" CLD 23 MLTPL
Flowcon AHU Wafer F3860MBSSL 2 1/2" - 3" CLD 23 MLTPL
Flowcon K F380.0.F.B.I.SSL 3/4" CLD 23 MLTPL
Flowcon K F380.0.H.B.I.SSL 1" CLD 23 MLTPL
Flowcon K F381.0.J.B.I.SSL 1 1/4" CLD 23 MLTPL
Flowcon K F381.0.K.B.I.SSL 1 1/2" CLD 23 MLTPL
Flowcon Wafer F3320BSSL 4" CLD 23 MLTPL
Flowcon Wafer F3340BSSL 6" CLD 23 MLTPL
Flowcon Wafer F3680BSSL 10" CLD 23 MLTPL

[1] Certified for equivalent metric sizes.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Flowserve Corporation 
5215 North O'Connor Boulevard
Suite 2300 
Irving, TX 75039 
United States 
972-443-6500

Facility : Taneytown, MD

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Submersible Motors
Flowserve (Byron Jackson) Submersible Motors (Mechanical Sealed)[4] [G] 8" - 21" CLD 23 MLTPL

[4] Certified for a minimum daily flow of 150,000 L.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Submersible Pump Cable [G]
Flowserve (Byron Jackson) Submersible Cables [6] CLD 23 MLTPL

[6] 600 Volt  - 4 AWG, 2 AWG, 1/0 AWG, 300 MCM & 500 MCM
    5000 Volt - 4 AWG, 2 AWG, 1/0 AGW and 4/0 AWG
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Gems Sensors Inc. 
1 Cowles Road
Plainville, CT 06062 
United States 
860-747-3000
Visit this company's website

Facility : Plainville, CT

Mechanical Plumbing Devices

Trade Designation      

Faucets

End Point Meter[1]
FT-330 Turbine Flow Sensor      

[1] All products with the FT-330 designation may also include an additional 6-digit numeric
    suffix to indicate customizations to non-wetted parts only.

Miscellaneous Faucet Components
FT-100 Flow Turbine Insert 215100      
FT-100 Flow Turbine Insert 238600      



Georg Fischer Central Plastics, LLC 
4949 Joseph Hardin Drive
Dallas, TX 75236 
United States 
800-499-6927 
Visit this company's website

Facility : Dallas, TX

Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings[1]
Design-Flow 2" - 65" CLD 23 PE

[1] Design-Flow trade name may be followed by a suffix of #341-351.

Pipe[1]
Design-Flow 2" - 65" CLD 23 PE

[1] Design-Flow trade name may be followed by a suffix of #341-351.



 
Giacomini S.P.A. 
Via Per Alzo 39
28017 S. Maurizio D' Opaglio (NO) 
Italy 
39 0322 923372
Visit this company's website

Facility : D'Opaglio (NO), Italy

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Backflow Preventers
Dual Check Valve R623LF[G] 1/2", 3/4", 1" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Glen Raven Technical Fabrics LLC 
1831 North Park Avenue
Burlington, NC 27217 
United States 
800-487-4536 
336-227-6211
Visit this company's website

Facility : Burlington, NC

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filtration Devices/Components
GlenFlow HP [1] CLD 23 PET
GlenFlow LP1 [1] CLD 23 PET
GlenFlow LP2 [1] CLD 23 PET
GlenFlow LP3 [1] CLD 23 PET
GlenFlow LP4 [2] CLD 23 PET
GlenFlow LP5 [2] CLD 23 PET
GlenFlow LP6 [2] CLD 23 PET
GlenFlow LP7 [2] CLD 23 PET
GlenFlow LP8 [2] CLD 23 PET
GlenFlow LP9 [2] CLD 23 PET

[1] GlenFlow HP, GlenFlow LP1, GlenFlow LP2, and GlenFlow LP3 are certified for a thickness
    of 10-12 mils.
[2] GlenFlow LP4 , GlenFlow LP5 , GlenFlow LP6 , GlenFlow LP7, GlenFlow LP8, and GlenFlow
    LP9 are certified for a thickness of 8-14 mils.



 
Golan Plastic Products Ltd. 
Kibbutz Shaar Hagolan
M.P. Jordan Valley 15145 
Israel 
972 46 677432
Visit this company's website

Facility : Jordan Valley, Israel

Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Pipe Only
HeatFlow PEX PE-Xa Black[1] >= 3/8" C. HOT PEX
HeatFlow PEX PE-Xa Natural[1] >= 3/8" C. HOT PEX
HeatFlow PEX PE-Xc Black[1] >= 1/4" C. HOT PEX
HeatFlow PEX PE-Xc Blue[1] >= 1/4" C. HOT PEX
HeatFlow PEX PE-Xc Natural[1] >= 1/4" C. HOT PEX
HeatFlow PEX PE-Xc Red[1] >= 1/4" C. HOT PEX
HeatFlow PEX PE-Xc White[1] >= 1/4" C. HOT PEX

[1] These products may also be produced with a blue, clear, or red barrier material on the
    outer layer of the tubing.



 
Graver Technologies LLC 
200 Lake Drive
Glasgow, DE 19702 
United States 
800-249-1990 
302-731-1700
Visit this company's website

Facility : Glasgow, DE

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Microfiltration Devices
High Flow Filter Cartridges HF [A]-[B][C][3] [4] D. HOT MLTPL

[1] A - Retention rating (0.5 - 75 microns) 
    B - Length (9.75" - 40") 
    C - End configuration 
        P6: Self-seal spring on one end 
        PX: Extended core 
        NN: No end caps, no gaskets
[2] Certified for a minimum daily flow rate of 2880 gallons.
[3] HF[A]-[B][C]
    HF - High Flow Series
    A  - Retention Rating (1 - 100 microns)
    B  - Length (20" - 60")
    C  - Gasket or O-Ring
         E  - EPDM
         S  - Silicon
[4] Certified for a minimum daily flow of 270,000 L.



 
Guilford Mills, Inc. 
1001 Military Cutoff Road
Suite 300 
Wilmington, NC 28405 
United States 
336-316-4000

Facility : Kenansville, NC

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filtration Devices/Components[1]
FreFlo 6-20 mil thickness CLD 23 MLTPL
FreFlo® Hybrid™ 6-20 mil thickness CLD 23 MLTPL

[1] Certified for a minimum daily flow of 378 Liters per day.


Facility : Pine Grove, PA

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filtration Devices/Components
FreFlo® Hybrid™ 6-20 mil thickness CLD 23 MLTPL
Freflo[1] 6-20 mil thickness CLD 23 MLTPL

[1] Certified for a minimum daily flow of 378 Liters per day.


Facility : Huainan, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filtration Devices/Components[1]
FreFlo® 6-20 mil thickness CLD 23 MLTPL
FreFlo® Hybrid™ 6-20 mil thickness CLD 23 MLTPL

[1] Certified for a minimum daily flow of 378 liters per day.


Facility : Zhejiang Province, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filtration Devices/Components[1]
FreFlo® [2] CLD 23 MLTPL
FreFlo® Hybrid ™ [2] CLD 23 MLTPL

[1] Certified for 6-20 mil thickness.
[2] Certified for a minimum daily flow of 378 liters per day.



 
Hansgrohe SE 
Austre. 5-9
D-77761 Schiltach 
Germany 
49 7836 51 1393
Visit this company's website

Facility : Alpharetta, GA

Mechanical Plumbing Devices

Trade Designation      

Faucets
04531xxx Metris S 110 Single Hole Faucet Low Flow w/o Pop-up[1] [G]      
04532xxx Talis E 100 Single Hole Faucet Low Flow w/o Pop-up[1] [G]      
31204xxx Metris 110 Single Hole Faucet Low Flow[1] [G]      
31952xxx Focus E 70 Single Hole Faucet Low Flow 1gpm w/o Pop-up[1] [G]      
32146xxx Talis S 80 Single-Hole Faucet w/o Pop-up Low Flow[1] [G]      

[1] Suffix "xxx" indicates external, non-wetted finish and market/packaging options as
    follows:
    00x - Chrome
    02x - PVC chrome
    09x - Chrome/gold
    13x - Polished bronze
    14x - Brushed bronze
    25x - Brushed gold optik
    26x - Brushed chrome
    30x - Polished red gold
    31x - Brushed red gold
    33x - Polished black chrome
    34x - Brushed black chrome
    40x - White/chrome
    42x - Platinum
    43x - Red
    45x - White
    46x - Grey
    48x - Yellow
    49x - White/gold
    62x - Oil rub bronze
    66x - Purple
    80x - Steel cptik
    82x - Brushed nickel
    83x - Polished nickel
    86x - Steel optik
    88x - Satin chrome
    89x - Satin chrome/gold
    92x - Rubbed bronze
    93x - Polished brass
    99x - Polished Gold optik
    xx0 - Universal/North American market
    xx1 - For North American Market only
    xx2 - Universal/North American market
    xx3 & xx5 - Retail packaging
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Harmsco, Inc. 
P.O. Box 14066
North Palm Beach, FL 33408-0066 
United States 
800-327-3248 
561-848-9628

Facility : West Palm Beach, FL

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Miscellaneous Treatment Devices/Components
Harmsco® HIF Up-Flow Filters[5] >= 29.5 gal. CLD 23 MLTPL
Harmsco® HIF Up-Flow Filters[4] [G] >= 5.5 gal. D. HOT MLTPL
Harmsco® HIF Up-Flow Filters HIF-14[4] [G] 8.5 gal. D. HOT MLTPL
Harmsco® HIF Up-Flow Filters HIF-16[4] [G] 8.3 gal D. HOT MLTPL
Harmsco® HIF Up-Flow Filters HIF-21[4] [G] 11.8 gal. D. HOT MLTPL
Harmsco® HIF Up-Flow Filters HIF-24[4] [G] 11.75 gal. D. HOT MLTPL
Harmsco® HIF Up-Flow Filters HIF-7[4] [G] 5.2 gal. D. HOT MLTPL

[4] Evaluated for use in a water treatment facility or distribution systems with inlet sizes
    of greater than one-inch diameter and where flow exceeds 3 gallons/minute.  Trade names
    refer to the housing only. Approved filter elements include HC/170-M or EZ-CLEAN by
    Harmsco, or other NSF/ANSI Standard 61 Certified cartridges meeting the size and minimum
    flow requirements.
[5] Certified for Harmsco® HIF Up-Flow Filter models: HIF-42, HIF-75, HIF-100, HIF-150-FL
    and HIF-200-FL.  Certified for use in a water treatment facility or distribution systems
    with inlet sizes of greater than one-inch diameter and where flow exceeds 3
    gallons/minute.
[6] Certification is for use in a water treament facility or distribution system with inlet
    sizes greater than 1" diameter and with a minimum flow of 3 gallons/minute (16,000
    liters/day).
    Trade names refer to the housing only. Approved filter elements include HC/170-M or
    EZ-CLEAN by Harmsco, or other NSF/ANSI Standard 61 Certified cartridges meeting the size
    and minimum flow requirements. These housings are not intended for use with cartridges
    above the Listed water contact temperature.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Infilco Degremont, Inc. 
8007 Discovery Drive
Richmond, VA 23229 
United States 
800-446-1150 
804-756-7600

Facility : Addison, IL

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filter Underdrain
Monoflor HD Ledge Plate [1] CLD 23 MLTPL
Monoflor HD Nozzle Adapter (long or short) [1] CLD 23 MLTPL
Monoflor HD Shim Collar [1] CLD 23 MLTPL
Monoflor HD Support Form [1] CLD 23 MLTPL

[1] Certified for a minimum flow rate of 1,440 gallons/day/square foot.


Facility : Alexandria, Ontario, Canada

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Miscellaneous Treatment Devices/Components
Monoflor HD Ledge Plate[2] [1] CLD 23 MLTPL
Monoflor Shim Collar[2] [1] CLD 23 MLTPL
Monoflor HD Nozzle Adapter (long or short)[2] [1] CLD 23 MLTPL

[1] Certified for a minimum flow rate of 1,440 gallons/day/square foot.
[2] Certification is for components of a filter underdrain system.



 
IPS Adhesives (Jiashan) Co., Ltd. 
11 Binjiang Road
Jiashan Economic Development Zone 
Zhejiang 314100 
China 
86 573 8425 2258
Visit this company's website

Facility : Zhejiang, China

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Solvent Cements
Weld-On® Flowguard Gold® Low-VOC One Step CPVC Cement >= 1/2" C. HOT NA

[1] Certified for use with Weld-On® P-68 Clear Low-VOC Primer for PVC/CPVC, Weld-On® P-70
    Clear Low-VOC CPVC/PVC Primer, or Weld-On® P-70 Purple Low-VOC CPVC/PVC Primer.



 
IPS Corporation 
17109 South Main
P.O. Box 379 
Gardena, CA 90248 
United States 
310-898-3351
Visit this company's website

Facility : Gardena, CA

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Solvent Cements
WELD-ON FLOWGUARD 714 CPVC CEMENT ORANGE HEAVY BODIED[1] [G] >= 1/2" C. HOT NA
Weld-On Low-VOC Flowguard Gold 1-Step CPVC[G] >= 1/2" C. HOT NA
Weld-On® Flowguard Gold® Low-VOC One Step CPVC Cement[G] >= 1/2" C. HOT NA
Weld-On® Flowguard® Glow Low-VOC CPVC Cement[G] >= 1/2" C. HOT NA

[1] The compliance of this product with the health effect requirements of NSF/ANSI Standard
    61 was determined based on the testing of pipe and fittings assembled using the cement
    and either Weld-On P-68 and P-70 Clear or Purple Primers.
[3] The compliance of this product with the health effect requirements of NSF/ANSI Standard
    61 was determined based on the testing of pipe and fittings assembled using the cement
    and Weld-On P-72 Clear Primer.
[4] The compliance of this product with the health effect requirements of NSF/ANSI Standard
    61 was determined based on the testing of pipe and fittings assembled using the cement
    and P-75 Aqua-Blue Low VOC primer.
[5] Weld-On® 919 Clear Low VOC may be applied without primer or with either Weld-On® P-68™
    Clear or Purple Primer or P-70™ Clear or Purple Primer.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[2] The compliance of this product with the health effect requirements of NSF/ANSI Standard
    61 was determined based on the testing of pipe and fittings assembled using the cement
    and either Weld-On® P-68 Clear or Purple, P-70® Clear or Purple, or P-72 Clear Primers.


 
J-M Manufacturing Co., Inc. 
9 Peach Tree Hill Road
Livingston, NJ 07039 
United States 
310-693-8200
Visit this company's website

Facility : # 17 Tulsa, OK

Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Pipe[1] [G]
Eagle Geo-Flo 1/2" - 24" CLD 23 PE
USPoly Eagle Geo-Flo 1/2" - 24" CLD 23 PE

[1] This product may be marked with an alternate trade name: J-M Manufacturing and/or PW
    Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo].
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.


 
JMF Company 
2735 62nd Street Court
P.O. Box 868 
Bettendorf, IA 52722 
United States 
563-332-9200
Visit this company's website

Facility : D'Opaglio (NO), Italy

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Backflow Preventers
8385212129800 3/4", 1" CLD 30 MLTPL
8385216169800 3/4", 1" CLD 30 MLTPL



 
John Guest Ltd 
Horton Road
West Drayton, Middlesex UB7 8JL 
United Kingdom 
44 18 95 449 233
Visit this company's website

Facility : Middlesex, United Kingdom

Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings[1]
SI42X SUPERSEAL FLOW BEND [2] [8] [G] [6] C. HOT MLTPL
SM42X SUPERSEAL FLOW BEND [2] [8] [G] [6] C. HOT MLTPL

[1] Collets within all series of fittings are interchangeable.
[2] All suffixes may or may not be included in the fitting trade name.
[3] X may represent catalogue series number, outer diameter tube size, thread type and size,
    and/or body color. Each may be designated by the following: 
    Catalogue series number: 01 - 63
    OD tube size: 02 - 22 
    Thread type and size: 01-38 
    Color - Color - B (blue), E (black), R (red), W (white)) 
    Body Color may be W (white)or E (black). 
    A, B, and C represent configurations of an unequal tee connector.
    All suffixes may or may not be included in the fitting trade name.
[4] Certified sizes are 3/8" - 1" CTS or 10 mm - 28 mm.
[5] X may represent catalogue series number, outer diameter tube size, thread type and size,
    and/or body color. Each may be designated by the following: 
    Catalogue series number: 01 - 49 
    OD tube size: 02 - 22 
    Thread type and size: 01 - 38 
    Color - B (blue), Br (brown), E (black), G (green), N (natural), R (red), S (standard
    two tone grey), W (white), Y (yellow).
    Body color may be W (white), S (standard two tone grey) , E (black), WB (white body with
    blue collets), WR (white body with red collets), or WY (white body with yellow collets).
    
    X2 represents double seal models.
[6] Certified sizes are 1/8" - 1 1/8" or 6 mm - 28 mm.
[7] Certified sizes are 1/4" - 3/8" or 3 mm - 22 mm.
[8] X may represent catalogue series number, outer diameter tube size, thread type and size,
    and/or body color. Each may be designated by the following: 
    Catalogue series number: 01 - 49 
    OD tube size: 02 - 22 
    Thread type and size: 01 - 38 
    Color - B (blue), Br, (brown), E (black), G (green), N (natural), R (red), S (standard
    two tone grey), W (white), Y (yellow) 
    Body color may be W (white), S (standard two tone grey), E (black), R (red), WB (white
    body with blue collets), WR (white body with red collets), DG (dark grey), S-B (grey
    body with blue collets), S-R (grey body with red collets), S-O (grey body with orange
    collets), or S-Y (grey body with yellow collets). 
    
    X2 represents double seal models 
    CS represents compact (short) handle version 
    SL represents grey body with longer stem 
    FS represents flat seal with grey body 
    A represents configurations of an unequal tee connector 
    FE represents flat seal with black body
[9] X may represent catalogue series number, outer diameter tube size, thread type and size,
    and/or body color. Each may be designated by the following: 
    Catalogue series number: 01 - 49 
    OD tube size: 02 - 22 
    Thread type and size: 01 - 38 
    Color - B (blue), Br (brown), E (black), G (green), N (natural), R (red), S (standard
    two tone grey), W (white), Y (yellow).
    Body color may be W (white), S (standard two tone grey) , E (black), WB (white body with
    blue collets), WR (white body with red collets), or WY (white body with yellow collets).
    
    X2 represents double seal models.
    LF represents lead free
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    
[10] Certified sizes are 1/4" - 3/8" or 6 mm - 15 mm.
[11] bb - O.D. tube size (M in mm, I in 1/32")
     s  - Grey (color)
     x  - Type of thread
     y  - Pipe thread size in 1/8" units
[12] LF - Ecobrass
[13] X may represent catalogue series number, outer diameter tube size, thread type and size,
     and/or body color. Each may be designated by the following: 
     Catalogue series number - 01 - 49 
     OD tube size - 02 - 22 
     Thread type and size - 01 - 38 
     Color - B (blue), Br (brown), E (black), G (green), N (natural), R (red), S (standard
     two tone grey), W (white), Y (yellow) 
     Body Color may be W (white). 
     A, B, C, and D represent configurations of an unequal tee connector. 
     FS represents face seal.



 
Jones Stephens Corp. 
3242 Moody Parkway
P.O. Box 580 
Moody, AL 35004 
United States 
800-355-6637 
205-640-7200

Facility : D'Opaglio (NO), Italy

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Backflow Preventers
Dual Check Valve B59-001 3/4", 1" CLD 30 MLTPL
Dual Check Valve B59-002 3/4", 1" CLD 30 MLTPL



 
Kamstrup A/S 
Industrivej 28
DK-8660 Skanderborg 
Denmark 
45 89 93 10 00
Visit this company's website

Facility : Skanderborg, Denmark

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Water Meters[1] [2]
flowIQ 2100 02U-AB-C0D-EFG 5/8" - 1" D. HOT MLTPL
flowIQ 2101 021-AB-C0D-EFG 5/8" - 1" D. HOT MLTPL
flowIQ 3101[G] 1" - 2" (25 - 50mm) D. HOT MLTPL

[1] AB - Radio frequency and transmission protocol
    C  - Battery size and lifetime
    D  - Meter nominal flow, physical dimension, and dynamic range
         A - 1.6 m3/h, 100 mm, R160
         D - 2.5 m3/h, 110 mm, R250
         E - 2.5 m3/h, 190 mm, R250
         G - 2.5 m3/h, 105 mm, R250
         H - 2.5 m3/h, 130 mm, R250
         L - 4.0 m3/h, 130 mm, R250
         N - 4.0 m3/h, 190 mm, R250
         2 - 25 GPM, 5/8" x 7 1/2"
         3 - 25 GPM, 7 1/2", prototype
         4 - 25 GPM, 5/8" x 3/4" x 7 1/2"
         6 - 32 GPM, 3/4" x 7 1/2"
    E  - Temperature class
         7 - Warm water
         8 - Cold water
    FG - Country code controlling language on meter, manual, etc.
    The brass coupling and non return valves are not included in this Certification.
[2] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Kason Industries Inc. 
31 Amlajack Boulevard
Shenandoah, GA 30265 
United States 
770-251-1422
Visit this company's website

Facility : Shengkang Changhua, Taiwan

Mechanical Plumbing Devices

Trade Designation      

Faucets
0451KL8710 8" Wall Mount High Flow Faucet with 10" Spout[1] [G]      
0451KL8712 8" Wall Mount High Flow Faucet with 12" Spout[1] [G]      
0452KL2710 Single Pantry Deck Mount High Flow Faucet with 10" Spout[G]      
0452KL2712 Single Pantry Deck Mount High Flow Faucet with 12" Spout[G]      

[1] Any of these trade names may have the prefix 1 or 6, which denotes the selling division.
[2] The suffix XX denotes one of the following:
    01 - 3 1/2" Gooseneck spout
    02 - 6" Gooseneck spout
    03 - 8" Gooseneck spout
    06 - 6" Spout
    08 - 8" Spout
    10 - 10" Spout
    12 - 12" Spout
    14 - 14" Spout
    16 - 16" Spout
[3] The suffix XX denotes one of the following for 0457KL40XX models:
    06 - 6" Swivel spout
    08 - 8" Swivel spout
    10 - 10" Swivel spout
    12 - 12" Swivel spout
    14 - 14" Swivel spout
    16 - 16" Swivel spout
[4] The suffix XX denotes one of the following for 0457KL48Xx models:
    01 - 3 1/2" Gooseneck swivel spout
    02 - 6" Gooseneck swivel spout
    03 - 8 1/2" Gooseneck swivel spout
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Kinetico Incorporated 
10845 Kinsman Road
P.O. Box 193 
Newbury, OH 44065 
United States 
440-564-9111

Facility : # 1 USA

Mechanical Plumbing Devices

Trade Designation      

Glass Fillers

Kinetico Contemporary Drinking Water Faucet[1] [G]
Classic Chrome Hi Flow      
Satin Nickel Hi Flow      

[1] These models are NSF Certified faucet components.  The assembly of components does not
    constitute an NSF Certified faucet.  Complete faucet assemblies are NSF Certified only
    if the assembled faucet appears in NSF Listings.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Kinetico Designer Drinking Water Faucet[1] [G]
Arctic White Hi Flow      
Black Licorice Hi Flow      
Brilliant Nickel Hi Flow      
Brushed Stainless Hi Flow      
Classic Chrome Hi Flow      
Copper Hi Flow      
Light Biscuit Hi Flow      
Oil Rubbed Bronze Hi Flow      
Polished Brass Hi Flow      
Satin Nickel Hi Flow      

[1] These models are NSF Certified faucet components.  The assembly of components does not
    constitute an NSF Certified faucet.  Complete faucet assemblies are NSF Certified only
    if the assembled faucet appears in NSF Listings.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Kuching International Ltd. 
No. 1-2. Lane 73, Sec 2, Chung Shan Road
Tantzu County 
Taichung Hsien 
Taiwan 
886 42 531 9807

Facility : Taichung Hsien, Taiwan

Mechanical Plumbing Devices

Trade Designation      

Faucet Cartridges
K025A Faucet Cartridge (Restricted Flow)[1]      
K025H Faucet Cartridge (Free Flow)[1]      

[1] Meaning of letters in the trade name:
    K  – Kuching International 
    A  – Restricted flow 
    H  – Free flow 
    O  – Front outlet 
    2S - Two-Step valve
    P  - Pressure balance valve
    
    The trade names may include the following suffixes: 
    A - "A" type discs 
    B - "B" type discs 
    E - "E" type discs 
    H – "H" type discs
    J - Joystick 
    K - "K" type discs
    M – Noise Reducer 
    R – "R" type discs 
    S – "S" type discs
[2] Meaning of letters in the trade name:
    K – Kuching International
    A – Restricted flow
    H – Free flow
    R – Rotary
    O – Front outlet
    S (fifth position) - Standard housing
    S (sixed position) - Standard handle
    The trade names may include the following suffixes:
    R – "R" type discs
    H – "H" type discs
    N – "N" type discs
    S – "S" type disks
    K - "K" type discs
    B - "B" type discs
    E - "E" type discs
    A - "A" type disks
    M – Noise reducer
    J - Joystick
    N or W (7th position) - Certification status
    N (8th position) - Without Noise Reducer
[3] XXXX indicates any combination of suffixes containing four or less characters:
    A - Restricted flow
    A - "A" type discs
    B - "B" type discs
    E - "E" type discs
    H - Free flow
    H - "H" type discs
    J - Joystick
    K - "K" type discs
    M - Noise Reducer
    R - "R" type discs
    S - "S" type discs
    The suffix A has two possible meanings, either restricted flow or A-type discs.  These
    suffixes can be used in combination.  When used separately, if A is the first suffix
    used,  the A is for restricted flow.  If A comes after the first suffix, then A-type
    discs are used in the cartridge.
[4] May be sold with cartridge models K405AB, K405AR, K405AE, K405AA, K405AH, K405ABM,
    K405ARM, K405AEM, K405AAM or K405AHM.
[5] Meaning of letters in the trade name:
    K  – Kuching International
    A  – Restricted flow
    H  – Free flow
    O  – Front outlet
    2S – Two-Step valve
    P  – Pressure balance valve
    SS - Standard parts of housing and handle
    
    The trade names may include the following suffixes:
    R – "R" type discs
    H – "H" type discs
    S – "S" type disks
    K - "K" type discs
    B - "B" type discs
    E - "E" type discs
    A - "A" type disks
    N or W (next to last position) - indication of certifications
    N (last prosition) - without Noise Reducer
    M - Noise Reducer
    J - Joystick
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Kunshan KCG Precision Valve Co., Ltd. 
No. 118, Fushikang Road
Kunshan City 215316 
China 
86 512 5778 6718

Facility : Kunshan City, China

Mechanical Plumbing Devices

Trade Designation      

Faucet Cartridge Valves
K025A Faucet Cartridge (Restricted Flow)[1]      
K025H Faucet Cartridge (Free Flow)[1]      

[1] Meaning of letters in the trade name: 
    2S – Two-Step Valve 
    A  – Restricted flow
    H  – Free Flow 
    K  – Kunshan KCG Precision Valve Co., Ltd. 
    O  – Front Outlet
    P  – Pressure Balance Valve 
    
    The trade names may include the following suffixes: 
    A - "A" type disks 
    B - "B" type disks
    E - "E" type disks
    H – "H" type disks 
    J - Joystick 
    K - "K" type disks
    M – Noise reducer  
    R – "R" type disks 
    S – "S" type disks
[2] X indicates any combination of suffixes: 
    A - "A" type disks
    A - Restricted flow
    B - "B" type disks
    E - "E" type disks
    H - "H" type disks   
    H - Free flow 
    J - Joystick 
    K - "K" type disks  
    M - Noise Reducer 
    R - "R" type disks 
    S - "S" type disks 
    The suffix A has two possible meanings, either restricted flow or A-type disks. These
    suffixes can be used in combination. When used separately, if A is the first suffix
    used, the A is for restricted flow. If A comes after the first suffix, then A-type disks
    are used in the cartridge.
[3] May be sold with cartridge models K405AB, K405AR, K405AE, K405AA, K405AH, K405ABM,
    K405ARM, K405AEM, K405AAM or K405AHM



 
Lake City Industrial Products Co., Inc. 
10490 West Lake Road
P.O. Drawer 341 
Lake City, PA 16423 
United States 
800-458-0469 
814-774-2687

Facility : Lake City, PA

Mechanical Plumbing Devices

Trade Designation      

Fittings

Flomite "Y" Strainer
YS-F-SP 3750 250      
YS-F-FM 2500      
YS-F-FM 3750      
YS-F-SR 3750 250      
YS-F-EB 250 250      



 
Legend Valve and Fittings, Inc. 
51245 Filomena Drive
Shelby Township, MI 48315 
United States 
800-752-2082 
586-566-7400

Facility : D'Opaglio (NO), Italy

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Backflow Preventers
Dual Check Valve T-457 1/2", 3/4", 1" CLD 23 MLTPL
Dual Check Valve T-457NL[G] 1/2", 3/4", 1" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
LSP Products Group 
3689 Arrowhead Drive
Carson City, NV 89706 
United States 
775-884-4242

Facility : # 3 USA

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Thread Compounds
White Teflon 222 Pipe Thread Sealant >= 1/2" C. HOT TS

[1] Certified for the following colors: blue, gold, and white.



 
Manuspec Co., Inc. 
23802 FM2978 - Building #C2
Tomball, TX 77375 
United States 
281-351-9889
Visit this company's website

Facility : Tomball, TX

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Thread Compounds[2]
MS92 Multi-Seal with Teflon Thread Sealant[3] >= 1/2" C. HOT TS

[2] Listed models have lot #503311 or greater.
[3] Certified for the following colors: blue, gold, and white.



 
Medora Corporation 
3225 Highway 22 North
Dickinson, ND 58601-9419 
United States 
866-437-8076 
701-225-4495
Visit this company's website

Facility : Dickinson, ND

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Miscellaneous Process Devices/Components [G]
Grid Bee® SN10 Floating Spray Nozzle THM Removal[3] [4] >= 10,000 gal. CLD 23 MLTPL
Grid Bee® SN15 Floating Spray Nozzle THM Removal[3] [4] >= 10,000 gal. CLD 23 MLTPL
Grid Bee® SN3 Floating Spray Nozzle THM Removal[3] [4] >= 10,000 gal. CLD 23 MLTPL
Grid Bee® SN5 Floating Spray Nozzle THM Removal[3] [4] >= 10,000 gal. CLD 23 MLTPL

[1] Certification of the and GS-9 and GS-12 does not include the motor.
[2] Certification of the GS-12 v2 and GS-14 v2 does not include the motor or pump.
[3] Certification does not include a motor.
[4] The numerical suffix (3, 5, 10, 15) after the SN in the trade name indicates the
    horsepower of the motor.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Membrana 
13800 South Lakes Drive
Charlotte, NC 28173 
United States 
704-587-8888
Visit this company's website

Facility : Charlotte, NC

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Miscellaneous Treatment Devices/Components[1]
Liqui-Cel® 14 X 28 Extra Flow Membrane Contactor with X40 membrane fiber[2] 14" x 28" CLD 23 MLTPL
Liqui-Cel® 14 X 28 Extra Flow Membrane Contactor with X50 membrane fiber[2] 14" x 28" CLD 23 MLTPL
Liqui-Cel® 14 X 40 Extra Flow Membrane Contactor with X40 membrane fiber[3] 14" x 40" CLD 23 MLTPL
Liqui-Cel® 14 X 40 Extra Flow Membrane Contactor with X50 membrane fiber[3] 14" x 40" CLD 23 MLTPL
Liqui-Cel®10x28 Extra-Flow Membrane Contactor with X40 fiber, FRP vessel[4] 10" x 28" CLD 23 MLTPL
Liqui-Cel®10x28 Extra-Flow Membrane Contactor with X40 fiber, SS vessel[4] 10" x 28" CLD 23 MLTPL
Liqui-Cel®10x28 Extra-Flow Membrane Contactor with X50 fiber, FRP vessel[4] 10" x 28" CLD 23 MLTPL
Liqui-Cel®10x28 Extra-Flow Membrane Contactor with X50 fiber, SS vessel[4] 10" x 28" CLD 23 MLTPL

[1] Size is diameter x length.
[2] Certified for a minimum flow of 100,000 gallons per day.
[3] Certified for a minimum flow of 144,000 gallons per day.
[4] Certified for a minimum flow of 60,000 gallons per day.



 
N.D.S., Inc. 
851 North Harvard
Lindsay, CA 93247 
United States 
800-992-9949 
559-562-9888
Visit this company's website

Facility : Lindsay, CA

Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings [G]
Flo-Lock Compression Fittings[2] 1/2" - 2" CLD 23 MLTPL

[1] Each trade name is followed by a two digit value which equates to a part size as
    follows:
    05: 1/2"
    07: 3/4"
    10: 1"
    12: 1 1/4"
    15: 1 1/2"
    20: 2"
    25: 2 1/2"
    30: 3"
    40: 4"
    60: 6"
    71: 3/4" - 1"
[2] Each trade name is followed by a two digit value which equates to a part size as
    follows:
    05:  1/2"
    07:  3/4"
    71:  3/4" - 1"
    10:  1"
    12:  1 1/4"
    15:  1 1/2"
    20:  2"
    121: 1" x 1 1/4"
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Neoperl Inc. 
171 Mattatuck Heights
Waterbury, CT 06705-3832 
United States 
203-756-8891
Visit this company's website

Facility : Waterbury, CT

Mechanical Plumbing Devices

Trade Designation      

Aerators
01.5809.0 Flow-Thru-STD-f M22x1-V-D.7[G]      
01.5810.0 Flow-Thru-STD-m M24x1-V-D.7[G]      
01.5811.0 Flow-Thru-STD-m M24x1-V-D.7-HT-C[G]      
01.5812.0 PL-HC-Flow-Thru-STD-m M24x1-PCA 6,0L[G]      
01.5813.0 PL-HC-Flow-Thru-STD-m M24x1-PCA 2.2gpm[G]      
01.5814.0 PL-HC-Flow-Thru-STD-m M24x1-PCA 8,0L[G]      
01.5815.0 PL-HC-Flow-Thru-STD-m M24x1-PCA 5,0L[G]      
01.5819.0 flow thru STD d7 f M22 cyl[G]      
01.5820.0 flow thru STD D.7 f M22x1 cyl[G]      
01.5821.0 flow thru STD d7 f M22 cyl[G]      
02.5107.0 Flow Thru STD IT D.7[G]      
02.5108.0 Flow Thru STD IT D.7-C[G]      
02.5110.1 Flow Thru STD IT D.5,6 Grey[G]      
02.5112.1 Flow Thru STD IT D.5,6 Grey PCA 6,0L[G]      
02.5113.1 Flow Thru STD IT D.5,6 Grey PCA 2.2gpm[G]      
02.5114.1 Flow Thru STD IT D.5,6 Grey PCA 8,0L[G]      
02.5115.1 Flow Thru STD IT D.5,6 Grey PCA 5,0L[G]      
02.5117.1 Flow Thru STD IT D.7-HT-C[G]      
B1.AU13.1.1171 Spring-Flo Ultra Female[G]      
B1.AU23.1.3171 Spring-Flo Ultra Male[G]      
B1.AU73.1.7171 Spring-Flo Ultra Dual Thread[G]      
Bx.abcd.1.efghi Cascade Flow Restricting Aerators[Pb]      
Bx.abcd.1.efghi Perlator TT Aerated Flow Aerators[G]      
Bx.abcd.1.efghi Perlator TT Laminar Flow Aerators[G]      
Bx.abcd.1.efghi Spring-Flo Aerators      
G1.A313.1.C171 Low Lead Spring-Flo[G]      
G1.A373.1.D171 Low Lead Spring-Flo[G]      
G1.A3G3.1.C171 Low Lead Spring-Flo[G]      
G1.B383.1.E171 Spring Flo Jr 2.2 gpm[G]      
G1.B3A3.1.E171 Spring-Flo Junior Slotted 2.2 gpm[G]      
Rx.abcd.1.efghi Cascade Flow Restricting Aerators[Pb]      
Rx.abcd.1.efghi Perator TT Aerated Flow Aerators[G]      
Rx.abcd.1.efghi Perlator TT Laminar Flow Aerators[G]      
Rx.abcd.1.efghi Spring-Flo Aerators      

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

Miscellaneous Faucet Components
GX.0693.1.9901 Rose Spray Full Flow[G]      
Gx.3233.1.9501 Snap Fitting 323,LF PL HC V Flow,DT15/16-27x55/64-27,Lrg Diameter[G]      

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Facility : Shanghai, China

Mechanical Plumbing Devices

Trade Designation      

Aerators[1]
Bx.abcd.1.efghi Cascade Flow Restricting Aerators[G]      
Bx.abcd.1.efghi Perlator TT Aerated Flow Aerators[G]      
Bx.abcd.1.efghi Perlator TT Laminar Flow Aerators[G]      
Bx.abcd.1.efghi Spring-Flo Aerators      
Rx.abcd.1.efghi Cascade Flow Restricting Aerators[G]      
Rx.abcd.1.efghi Perlator TT Aerated Flow Aerators[G]      
Rx.abcd.1.efghi Perlator TT Laminar Flow Aerators[G]      
Rx.abcd.1.efghi Spring-Flo Aerators      

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[1] All aerators, faucet end attachments, snap fittings, and couplers are designated
    according to one of the following numbering schemes: Bx.abcd.1.efghi or Rx.abcd.1.efghi.
     Aerator replacement components that begin with A or 0 do not follow the numbering
    scheme.  The part number is individual. 
    B  - Neoperl North America
    R  - Retail
    x  - Assembly stage
         1   - Aerator
         2   - Insert with dome screen
         3   - Insert without dome
         9   - Vandal proof aerator
         B   - Unassembled aerator
         C   - Vandal proof aerator with hose guard
         E   - Aerator with adapter
         F   - Cachè
         V** - Components
         W** - Washer
         X*  - Adapters/couplers/swivels
    a  - Product type
         0 - Void
         1 - Perlator
         2 - Perlator Jr.
         3 - Cascade
         4 - NEOPERL - LL
         6 - Spray
         7 - Care (laminar)
         A - Spring flo 
         B - Spring flo Jr.   
         C - Perlator/short
         D - Perlator laminar Jr.
         E - Perlator Tom Thumb 
         F - Laminar Tom Thumb 
         G - R O coupler
         H - Spray Jr.
         L - Perlator laminar
         M - Careguard
         S - SLC aerator
    b  - Flow rate
         0 - Void
         1 - 1.5 GPM
         2 - 2.0 GPM
         3 - 2.2 GPM
         4 - 3.0 GPM
         5 - PCA 0.5 GPM (1,7 L)
         6 - PCA 1.0 GPM (3,5 L)
         7 - PCA 1.5 GPM (5,0 L)
         8 - PCA 2.2 GPM (8,3 L)
         9 - FF (full-flow)
         A - Class A
         B - Class B
         C - Class C
         D - Class D
         E - Class U
         F - Class Z
         G - 3.5 GPM
         H - Class M
         J - PCA 8.0 L
         K - 4.0 GPM
         L - Max flow
         M - 4.5 GPM
         N - 1.0 GPM
         Q - PCA .66 GPM (2,5 L)
         R - PCA 1.75 GPM (6,0 L)
    c  - Housing thread (letter or number representing housing thread)
    d  - Finish/color (letter or number representing finish/color)
    1  - Place holder (constant)
    e  - Washer # 
         0 - Void
         1 - BW.7134.1 (lg .072)
         2 - BW.7134.1 (lg .072)
         3 - BW.7110.1 (lg .095)
         4 - BW.7110.1 (lg .095)
         5 - BW.7411.1 (lg .125)
         6 - BW.5065.1 & BW.7134.1 (dt .075)
         7 - BW.5065.1 & BW.7134.1 (dt .075)
         8 - BW.7129.1 (jr. PCA .125)
         9 - BW.7476.1 (jr .125)
         A - BW.6313.1 (jr .144)
         B - BW.7102.1 (jr. PCA .144)
         C - BV.6217.1 lg. spring flo
         D - BW.0002.1 (.828 santoprene)
         E - BV.6230.1 sm. spring flo
         F - BW.6309.1 (jr. .062)
         G - 55.1149.1 (TT .110)
         H - 55.1148.1 (TT .060)
         J - BW.0003.1 (Chicago fct)
         K - BW.0005.1
         L - BW.0006.1
         M - 55.1252.1 (M28)  
    fg - Marking (letters and numbers respresenting marking)
    h  - Packaging (letter or number representing packaging)
    i  - Customer name (letter representing customer labeling)
    *  - Random numbers  
         a - Product type
         b - Flow rate
         c - Housing tread
    ** - Random numbers
         a - Product type
         b - Flow rate
         c - Housing tread
         d - Finsh/colorD)


Facility : Mullheim, Germany

Mechanical Plumbing Devices

Trade Designation      

Aerators
01.5172.0 Cachè Laminar TT Max Flow[G]      
01.5809.0 Flow-Thru-STD-f M22x1-V-D.7[G]      
01.5810.0 Flow-Thru-STD-m M24x1-V-D.7[G]      
01.5811.0 Flow-Thru-STD-m M24x1-V-D.7-HT-C[G]      
01.5812.0 PL-HC-Flow-Thru-STD-m M24x1-PCA 6,0L[G]      
01.5813.0 PL-HC-Flow-Thru-STD-m M24x1-PCA 2.2gpm[G]      
01.5814.0 PL-HC-Flow-Thru-STD-m M24x1-PCA 8,0L[G]      
01.5815.0 PL-HC-Flow-Thru-STD-m M24x1-PCA 5,0L[G]      
01.5819.0 flow thru STD d7 f M22 cyl[G]      
01.5820.0 flow thru STD D.7 f M22x1 cyl[G]      
01.5821.0 flow thru STD d7 f M22 cyl[G]      
02.5107.0 Flow Thru STD IT D.7[G]      
02.5108.0 Flow Thru STD IT D.7-C[G]      
02.5110.1 Flow Thru STD IT D.5,6 Grey[G]      
02.5112.1 Flow Thru STD IT D.5,6 Grey PCA 6,0L[G]      
02.5113.1 Flow Thru STD IT D.5,6 Grey PCA 2.2gpm[G]      
02.5114.1 Flow Thru STD IT D.5,6 Grey PCA 8,0L[G]      
02.5115.1 Flow Thru STD IT D.5,6 Grey PCA 5,0L[G]      
02.5117.1 Flow Thru STD IT D.7-HT-C[G]      

[1] PL  - Perlator 
    RC  - Rectangular 
    FS  - Flow straightener 
    40X10, 38X12, 32X8, 28X7, 24.5X9, 24X8, 24X6 - Nominal length and width in millimeters 
    IT  - Insert 
    LAM - Laminar flow 
    HC  - Honeycomb 
    RS  – Rectangular seal 
    C   – Diffuser plate and dome screen C 
    B   – Diffuser plate and dome screen B 
    A   - Diffuser plate and dome screen A 
    V   – Flow rate for aerators with diffuser system 
    TUB – Tub filler size 
    RD  – Radial washer shape 
    AX  – Axial washer shape
[3] 42  - JR size MC aerators
    a   - Line/model
          2 - Perlator honeycomb
          3 - Perlator honeycomb (diffuser technology)
    b   - Aerated/laminar (incl. CACHÉ)
          0 - Aerated
          1 - Laminar
          2 - Aerated CACHÉ
          3 - Laminar CACHÉ
    cd  - Flow rate
          01 - X
          02 - Z
          03 - A
          05 - B
          30 - Diffuser V
          31 - Diffuser 1.0 gpm
          32 - Diffuser 1.5 gpm
          33 - Diffuser 2.0 gpm
          34 - Diffuser 2.2 gpm
          39 - Diffuser 1.75 gpm
          51 - PCA 5.0 L
          53 - PCA 2.2 gpm
          54 - PCA 8.0 L
          56 - PCA 1.5 gpm
          57 - PCA 2.0 gpm
          58 - PCA 1.0 gpm
          60 - PCA 1.25 gpm
          61 - PCA 1.75 gpm
    efg - Brass housing/surface thread
    
    Part numbers may also contain an additional numeric suffix to indicate packaging and
    external markings.
[4] 43 - TJ Size MC Aerators
         ab – Line
         20 - Perlator Honeycomb
         21 - Perlator Honeycomb laminar
         22 - CACHÉ Perlator Honeycomb
         23 - CACHÉ Perlator Honeycomb laminar
         30 – Perlator Honeycomb (diffuser technology)
         31 - Perlator Honeycomb (diffuser technology) laminar
         32 - CACHÉ Perlator Honeycomb (diffuser technology)
         33 - CACHÉ Perlator Honeycomb (diffuser technology) laminar
         60 – SSR (Aerator with swiveling honeycomb plate)
    cd - Flow rate
         01 - X
         02 - Z
         03 - A
         05 - B
         30 - Diffuser V
         31 - Diffuser 1.0gpm
         32 - Diffuser 1.5gpm
         33 - Diffuser 2.0gpm
         34 - Diffuser 2.2gpm
         39 - Diffuser 1.75gpm
         51 - PCA 5.0L
         53 - PCA 2.2gpm
         54 - PCA 8.0L
         55 - PCA 7.0L
         56 - PCA 1.5gpm
         57 - PCA 2.0gpm
         58 - PCA 1.0gpm
         60 - PCA 1.25gpm
         61 - PCA 1.75gpm
    efg - brass housing/surface thread
    
    Part numbers may also contain an additional numeric suffix to indicate packaging and
    external markings.
[5] efg - Brass housing/surface thread
    
    Part numbers may also contain an additional numeric suffix to indicate packaging and
    external markings.
[6] PL  - Perlator
    HC  - Honeycomb
    CS  - Coinslot
    STD - Standard size
    JR  - Junior size
    PCA - Pressure compensation aerator
[7] efgh - Packaging (0001 to 9999) consecutively numbered.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Miscellaneous Faucet Components
58.6156.0 SHS-C Flow Regulator[G]      
58.6157.0 SHL-B Flow Regulator[G]      
58.6158.0 SHL-C Flow Regulator[G]      
58.6266.1 E-NT 16.0 L Flow Regulator[G]      
58.6267.1 E-NT 5.0 L Flow Regulator[G]      
58.6268.1 E-NT 6.0 L Flow Regulator[G]      
58.6269.1 E-NT 7.0 L Flow Regulator[G]      
58.6270.1 E-NT 11.0 L Flow Regulator[G]      
58.6271.1 E-NT 8.0 L Flow Regulator[G]      
58.6272.1 E-NT 9.0 L Flow Regulator[G]      
58.6273.1 E-NT 10.0 L Flow Regulator[G]      
58.6274.1 E-NT 12.0 L Flow Regulator[G]      
58.6275.1 E-NT 13.0 L Flow Regulator[G]      
58.6276.1 E-NT 14.0 L Flow Regulator[G]      
58.6277.1 E-NT 15.0 L Flow Regulator[G]      
58.6278.1 E-NT 1.0 L Flow Regulator[G]      
58.6279.1 E-NT 2.0 L Flow Regulator[G]      
58.6280.1 E-NT 3.0 L Flow Regulator[G]      
58.6281.1 E-NT 4.0 L Flow Regulator[G]      
58.6282.1 E-NT 17.0 L Flow Regulator[G]      
58.6283.1 E-NT 18.0 L Flow Regulator[G]      
58.6284.1 E-NT 19.0 L Flow Regulator[G]      
58.6285.1 E-NT 26.5 L Flow Regulator[G]      
58.6301.1 MR03 0.25 L Flow Regulator[G]      
58.6302.1 MR03 0.5 L Flow Regulator[G]      
58.6303.1 MR03 1.0 L Flow Regulator[G]      
58.6304.1 MR03 1.9 L Flow Regulator[G]      
58.6305.1 MR03 5.0 L Flow Regulator[G]      
58.6306.1 MR03 6.0L Flow Regulator Assembly[G]      
58.6308.1 MR03 8.0L Flow Regulator Assembly[G]      
58.6309.1 MR03 9.0 L Flow Regulator[G]      
58.6310.1 MR03 4.0 L Flow Regulator[G]      
58.6311.1 MR03 2.5 L Flow Regulator[G]      
58.6316.1 E-NT 22.0 L Flow Regulator[G]      
58.6354.1 MR03 FG 4.0 L Flow Regulator[G]      
58.6355.1 MR03 FG 5.0 L Flow Regulator[G]      
58.6356.1 MR03 FG 6.0 L Flow Regulator[G]      
58.6357.1 MR03 FG 7.0 L Flow Regulator[G]      
58.6358.1 MR03 FG 8.0 L Flow Regulator[G]      
58.6359.1 MR03 FG 9.0 L Flow Regulator[G]      
58.6381.1 MR03-PG 0.5 gpm Flow Regulator[G]      
58.6385.1 MR03 PF-1.5 gpm Flow Regulator[G]      
58.6500.1 MR05 1,7L Flow Regulator[G]      
58.6501.1 MR05 0,5L Flow Regulator[G]      
58.6502.1 MR05 0,7L Flow Regulator[G]      
58.6503.1 MR05 1,0L Flow Regulator[G]      
58.6504.1 MR05 1,4L Flow Regulator[G]      
58.6505.1 MR05 1,9L Flow Regulator[G]      
58.6506.1 MR05 2,5L Flow Regulator[G]      
58.6507.1 MR05 3,0L Flow Regulator[G]      
58.6508.1 MR05 3,5L Flow Regulator[G]      
58.6509.1 MR05 4,0L Flow Regulator[G]      
58.6510.1 MR05 5,0L Flow Regulator[G]      
58.6512.1 MR05 6,0L Flow Regulator[G]      
58.6514.1 MR05 7,0L Flow Regulator[G]      
58.6515.1 MR05 7,3L Flow Regulator[G]      
58.6516.1 MR05 8,0L Flow Regulator[G]      
58.6517.1 MR05 8,3L Flow Regulator[G]      
58.6518.1 MR05 9,0L Flow Regulator[G]      
58.6520.1 MR05 10,0L Flow Regulator[G]      
58.6524.1 MR05 12,0L Flow Regulator[G]      
58.6527.1 MR05 14,0L Flow Regulator[G]      
58.6528.1 MR05 2,75L Flow Regulator[G]      
58.6640.1 L 20,0L Flow Regulator[G]      
58.6645.1 L 25,0L Flow Regulator[G]      
58.6646.1 L 30,0L Flow Regulator[G]      
58.6647.1 L 35,0L Flow Regulator[G]      
58.6648.1 L 38,0L Flow Regulator[G]      
58.6650.1 L 50,0L Flow Regulator[G]      
58.6655.1 L 70,0L Flow Regulator[G]      
58.6658.1 L 90,0L Flow Regulator[G]      
58.6660.1 L 100,0L Flow Regulator[G]      
58.7085.1 MR05 US 0.5 gpm Flow Regulator[G]      
58.7086.1 MR05 US 0.74 gpm Flow Regulator[G]      
58.7087.1 MR05 US 2.5 gpm Flow Regulator[G]      
58.7088.1 MR05 US 2.2 gpm Flow Regulator[G]      
58.7089.1 MR05 US 1.5 gpm Flow Regulator[G]      
58.7090.1 MR05 US 1.75 gpm Flow Regulator[G]      
58.7091.1 MR05 US 2.0 gpm Flow Regulator[G]      
58.7092.1 MR05 US 1.0 gpm Flow Regulator[G]      
58.7349.1 F-NT 22.0 L Flow Regulator[G]      
58.7350.1 F-NT 26,5 L Flow Regulator[G]      
58.7351.1 F-NT 1,0 L Flow Regulator[G]      
58.7352.1 F-NT 2,0 L Flow Regulator[G]      
58.7353.1 F-NT 3,0 L Flow Regulator[G]      
58.7354.1 F-NT 4,0 L Flow Regulator[G]      
58.7355.1 F-NT 5,0 L Flow Regulator[G]      
58.7356.1 F-NT 6,0 L Flow Regulator[G]      
58.7357.1 F-NT 7,0 L Flow Regulator[G]      
58.7358.1 F-NT 8,0 L Flow Regulator[G]      
58.7359.1 F-NT 9,0 L Flow Regulator[G]      
58.7360.1 F-NT 10,0 L Flow Regulator[G]      
58.7361.1 F-NT 11,0 L Flow Regulator[G]      
58.7362.1 F-NT 12,0 L Flow Regulator[G]      
58.7363.1 F-NT 13,0 L Flow Regulator[G]      
58.7364.1 F-NT 14,0 L Flow Regulator[G]      
58.7365.1 F-NT 15,0 L Flow Regulator[G]      
58.7366.1 F-NT 16,0 L Flow Regulator[G]      
58.7370.1 F-NT 20,0 L Flow Regulator[G]      
58.7401.1 G-NT 1,0 L Flow Regulator[G]      
58.7402.1 G-NT 2,0 L Flow Regulator[G]      
58.7403.1 G-NT 3,0 L Flow Regulator[G]      
58.7404.1 G-NT 4,0 L Flow Regulator[G]      
58.7405.1 G-NT 5,0 L Flow Regulator[G]      
58.7406.1 G-NT 6,0 L Flow Regulator[G]      
58.7407.1 G-NT 7,0 L Flow Regulator[G]      
58.7408.1 G-NT 8,0 L Flow Regulator[G]      
58.7409.1 G-NT 9,0 L Flow Regulator[G]      
58.7410.1 G-NT 10,0 L Flow Regulator[G]      
58.7411.1 G-NT 11,0 L Flow Regulator[G]      
58.7412.1 G-NT 12,0 L Flow Regulator[G]      
58.7413.1 G-NT 13,0 L Flow Regulator[G]      
58.7414.1 G-NT 14,0 L Flow Regulator[G]      
58.7415.1 G-NT 15,0 L Flow Regulator[G]      
58.7416.1 G-NT 16,0 L Flow Regulator[G]      
58.7418.1 G-NT 18,0 L Flow Regulator[G]      
58.7420.1 G-NT 20.0 L Flow Regulator[G]      
58.7458.1 L-US 10,0 USG MAX Flow Regulator[G]      
58.7459.1 L-US 12.0 USG max. Flow Regulator[G]      
58.7460.1 L-US 13,0 USG MAX Flow Regulator[G]      
58.7462.1 L-US 15.0 USG max. Flow Regulator[G]      
58.7463.1 L-US 20,0 USG MAX Flow Regulator[G]      
58.7465.1 L-US 25,0 USG MAX Flow Regulator[G]      
58.7468.1 L-US 30,0 USG MAX Flow Regulator[G]      
58.7560.1 E-US 1.5 USG MAX Flow Regulator[G]      
58.7561.1 E-US 1.75 USG MAX Flow Regulator[G]      
58.7562.1 E-US 2.2 USG MAX Flow Regulator[G]      
58.7563.1 E-US 2.5 USG MAX Flow Regulator[G]      
58.7564.1 E-US 2.0 USG MAX Flow Regulator[G]      
58.7565.1 E-US 1.25 USG max. Flow Regulator[G]      
58.7570.1 F-US 1.5 gpm Flow Regulator[G]      
58.7571.1 F-US 1.75 gpm Flow Regulator[G]      
58.7572.1 F-US 2.2 gpm Flow Regulator[G]      
58.7573.1 F-US 2.5 gpm Flow Regulator[G]      
58.7574.1 F-US 2.0 gpm Flow Regulator[G]      
58.7579.1 G-US 1.25 USG max. Flow Regulator[G]      
58.7580.1 G-US 1,5 USG MAX Flow Regulator[G]      
58.7581.1 G-US 1,75 USG MAX Flow Regulator[G]      
58.7582.1 G-US 2,2 USG MAX Flow Regulator[G]      
58.7583.1 G-US 2,5 USG MAX Flow Regulator[G]      
58.7584.0 G-US 2.0 USG MAX Flow Regulator[G]      
58.7830.1 H-US 0,5 USG MAX Flow Regulator[G]      
58.7831.1 H-US 0,75 USG MAX Flow Regulator[G]      
58.7832.1 H-US 1,5 USG MAX Flow Regulator[G]      
58.7833.1 H-US 1,75 USG MAX Flow Regulator[G]      
58.7834.1 H-US 2,2 USG MAX Flow Regulator[G]      
58.7835.1 H-US 2,5 USG MAX Flow Regulator[G]      
58.7836.1 H-US2,0 USG MAX Flow Regulator[G]      
58.8131.1 E-T 2.0 L Flow Regulator[G]      
58.8132.1 E-T 3.0 L Flow Regulator[G]      
58.8133.1 E-T 3.5 L Flow Regulator[G]      
58.8134.1 E-T 4.0 L Flow Regulator[G]      
58.8135.1 E-T 5.0 L Flow Regulator[G]      
58.8137.1 E-T 7.0 L Flow Regulator[G]      
58.8138.1 E-T 2.15 L Flow Regulator[G]      
58.8139.1 E-T 9.0 L Flow Regulator[G]      
58.8140.1 E-T 10.0 L Flow Regulator[G]      
58.8142.1 E-T 12.0 L Flow Regulator[G]      
58.8225.1 MR01 FG-US 1.5 gpm Flow Regulator[G]      
58.8227.1 MR01 FG-US 1.75 gpm Flow Regulator[G]      
58.8228.1 MR01 FG-US 2.0 gpm Flow Regulator[G]      
58.8229.1 MR01 FG-US 2.2 gpm Flow Regulator[G]      
58.8231.1 MR01 FG-US 2.5 gpm Flow Regulator[G]      
58.8248.0 SHL-C 1.25 gpm Flow Regulator[G]      
58.8249.0 SHL-C 1.5 gpm Flow Regulator[G]      
58.8250.0 SHL-C 1.75 gpm Flow Regulator[G]      
58.8251.0 SHL-C 2.0 gpm Flow Regulator[G]      
58.8252.0 SHL-C 2.2 gpm Flow Regulator[G]      
58.8346.0 SHS-C 1.75 gpm Flow Regulator[G]      
58.8347.0 SHS-C 2.0 gpm Flow Regulator[G]      
58.8371.1 H-NT 2,0L Flow Regulator[G]      
58.8372.1 H-NT 3,0L Flow Regulator[G]      
58.8373.1 H-NT 3,5L Flow Regulator[G]      
58.8374.1 H-NT 4,0L Flow Regulator[G]      
58.8375.1 H-NT 5,0L Flow Regulator[G]      
58.8376.1 H-NT 6,0L Flow Regulator[G]      
58.8377.1 H-NT 7,0L Flow Regulator[G]      
58.8378.1 H-NT 8,0 L Flow Regulator[G]      
58.8379.1 H-NT 9,0L Flow Regulator[G]      
58.8380.1 H-NT 10,0L Flow Regulator[G]      
58.8381.1 H-NT 11.0 L Flow Regulator[G]      
58.8382.1 H-NT 12,0L Flow Regulator[G]      
58.8385.1 H-NT 22.5 L Flow Regulator[G]      
58.8533.1 MR03-US 1.0 gpm Flow Regulator[G]      
58.8535.1 MR03-US 1.5 gpm Flow Regulator[G]      
58.8536.1 MR03-US 1.75 gpm Flow Regulator[G]      
58.8537.1 MR03-US 2.0 gpm Flow Regulator[G]      
58.8538.1 MR03-US 2.2 gpm Flow Regulator[G]      

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[2] a   - Line/model
          0 - Cascade SLC
          1 - Cascade or Perlator DL
          2 - Perlator honeycomb
          3 - Perlator honeycomb (diffuser technology)
          4 - Perlator LL
          6 - SSR 
    b   - Aerated/laminar (incl. CACHÉ)
          0 - Aerated 
          1 - Laminar
          2 - Aerated CACHÉ
          3 - Laminar CACHÉ
          6 - Deluxe
    cd  - Flow rate
          00 - Max
          01 - X
          02 - Z
          03 - A
          04 - S
          05 - B
          06 - C
          07 - D
          10 - T
          30 - Diffuser V
          31 - Diffuser 1,0 gpm
          32 - Diffuser 1,5 gpm
          33 - Diffuser 2,0 gpm
          34 - Diffuser 2,2 gpm
          35 - Diffuser 3,0 gpm
          36 - Diffuser 3,5 gpm 
          37 - Diffuser 4,0 gpm
          38 - Diffuser 4,5 gpm
          51 - PCA 5,0 L
          52 - PCA 6,0 L
          53 - PCA 2,2 L
          54 - PCA 8,0 L 
          55 - PCA 7,0 L
          56 - PCA 1,5 gpm
          57 - PCA 2,0 gpm
          58 - PCA 1,0 gpm
          60 - PCA 1,25 gpm
          61 - PCA 1,75 gpm
    efg - Brass housing/surface thread
    
    Part numbers may also contain an additional numeric suffix to indicate packaging and
    external markings.


 
Neoperl Spare Parts 
171 Mattatuck Heights
Waterbury, CT 06705-3832 
United States 
203-756-8891

Facility : Waterbury, CT

Mechanical Plumbing Devices

Trade Designation      

Aerators[G]

Brasscraft
PRL028 Peerless dual flow spray aerator 0.5/2.2 gpm      
PRL059X Peerless low flow water saving faucet aerator 1.5 gpm      
PRL060X Peerless low flow water saving faucet aerator 1.5 gpm      
SF0114 BrassCraft low flow aerator 1.5gpm      
SF0304 BrassCraft Low Flow Male Aerator 1.5gpm      
SF0305 BrassCraft Low Flow Female Aerator 1.5gpm      
SF0325 BrassCraft water saving dual flow spray aerator 0.5/2.2 gpm      

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

NEOPERL
10101xx Spring-Flo Aerator 2.2 gpm      
10110xx Spring-Flo Aerator 2.2 gpm      
10120xx Spring-Flo Aerator 2.2 gpm      
10171xx Spring-Flo Junior Aerator 2.2 gpm      
10180xx Spring-Flo Junior Aerator 2.2 gpm      
10191xx Spring-Flo Aerator w/ adapter 2.2 gpm      
15020xx Spring-Flo LL Aerator 2.2 gpm      
15071xx Spring-Flo Junior Slotted Aerator 2.2 gpm      
15080xx Spring Flo Jr 2.2gpm      
15100xx Spring-Flo Ultra Aerator 2.2 gpm      
15110xx Spring-Flo Ultra Aerator 2.2 gpm      
15120xx Spring-Flo Ultra Aerator 2.2 gpm      
37011898 NEOPERL Spring Flo Ultra faucet aerator 2.2gpm, Standard Dual Thread      
50025xx Spring-Flo Aerator 2.2 gpm      
50026xx Spring-Flo Aerator 2.2 gpm      
50026xx Spring-Flo Aerator 2.2 gpm      
50061xx Spring-Flo Ultra Aerator 2.2 gpm      
50176xx Spring Flo Ultra Aerator2.2 gpm Mini Deal      
50445xx Spring-Flo Junior Slotted Aerator 2.2 gpm      
50446xx Spring Flo Jr 2.2gpm      
50447xx Spring-Flo Ultra Aerator 2.2 gpm      
50448xx Spring-Flo Ultra Aerator 2.2 gpm      
50449xx Spring-Flo Ultra Aerator 2.2 gpm      
50512xx Spring Flo Aerator 2.2 gpm      
50526xx Spring Flo Aerator 2.2 gpm      
50591xx Spring Flo Aerator 2.2 gpm      
50592xx Spring Flo Junior Aerator 2.2 gpm      
50593xx Spring Flo Junior Aerator 2.2 gpm      
97118.05 NEOPERL Spring Flo Ultra Faucet aerator 2.2 gpm, Standard Dual Thread      
SF0311 BrassCraft low flow dual thread aerator 1.0 gpm      

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Plumb Pak
PP800-113LF 0.5 and 2.2 gpm,Dual flow spray aerator,dual thread,black and chrome[G]      
PP800-213LF 0.5 and 2.2gpm,Dual flow spray aerator,dual thread,black and chrome[G]      

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Neptune Technology Group, Inc. 
1600 Alabama Highway 229
Tallassee, AL 36078 
United States 
334-283-7321

Facility : Tallassee, AL

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Water Meters[1] [G]
Neptune HP Tru/Flo Compound Meters 2" CLD 23 MLTPL
Neptune Tru/Flo Compound Meters 3" - 6" CLD 23 MLTPL

[1] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Orthos Liquid Systems, Inc. 
596 Browns Cove Road
Riverwalk Business Park 
Ridgeland, SC 29936 
United States 
843-987-7200

Facility : Ridgeland, SC

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filter Underdrain
Monolithic Filter Floor[1] N/A CLD 23 MLTPL
Monolithic Filter Floor with Filtration Nozzles[1] N/A CLD 23 MLTPL

[1] Certified for a minimum flow of 0.7 gallons per minute per square foot of filter area. 
    Certification includes filter nozzle types C1, C2, D, K1, K2, T1, R2, and Expanding Ring
    DB65 in the following colors: black, green, or beige.



 
Pall Corporation 
25 Harbor Park Drive
Port Washington, NY 11050 
United States 
516-484-3600
Visit this company's website

Facility : Cortland, NY

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filtration Devices/Components
Ultipleat High flow HFUJDS660060JUMW [17] CLD 23 MLTPL
Ultipleat High flow HFUJDS660200JUMW [17] CLD 23 MLTPL
Ultipleat High flow HFUYDS640100JUMW [17] CLD 23 MLTPL
Ultipleat High flow HFUYDS640200JUMW [17] CLD 23 MLTPL
Ultipleat High flow HFUYDS660045JUMW [17] CLD 23 MLTPL
Ultipleat High flow HFUYDS660200JUMW [17] CLD 23 MLTPL
Ultipleat High flow HFUYDS660400JUMW [17] CLD 23 MLTPL

[17] Media code
     J: HDC-II pleated PP
     Y: Ultipleat profile pleated depth PP
     Filter dimensions (in/mm)
     640: 6/152.4 x 40/1016
     660: 6/152.4 x 60/1524
     Micron code
     045: 4.5
     060: 6.0
     100: 10
     200: 20
     400: 40
     Certified for point-of-entry (POE) and municipal end uses.
[18] Certified for a minimum flow of 1,635,100 liters per day.
     Certified for use with Ultipleat cartridges only.
     [A]: Housing nozzle
          S: Std. duplex 2205
          Z: Zeron option
     [B]: Vent/Drain ports
          0: Null (Blind flanges)
          V: Vent/Drain kit option
     [C]: Isolation valves
          0: Null (Blind flanges)
          N: Nylon-Coated manual butterfly valve kit option
          S: SAF 2507 manual butterfly valve kit option
     [D]: Expansion joints
          0: Null (none)
          I: Imperial kit 10" x 10" ANSI
          M: Metric kit 10" ANSI x DN250



 
Parker Hannifin Corporation 
Process Filtration Division
6640 Intech Boulevard 
Indianapolis, IN 46278 
United States 
888-238-5356 
317-275-8300

Facility : Tell City, IN

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filtration Devices/Components
Fulflo Durabond Element[1] [2] CLD 23 MLTPL

[1] Certification includes the element only, and does not include the end caps,
    o-rings, or exterior housing.  Evaluated for use in water treatment facility
    or distribution system where the water flow exceeds 1440 gallons/day.
[2] Certified sizes are: 2 1/2" O.D. x 10" long through 2 1/2" O.D. x 50" long.

Microfiltration Devices
Fulflo EcoBond Filter Cartridge [3] CLD 23 PP
Fulflo Honeycomb Filter Cartridges[4] [5] CLD 23 MLTPL
Fulflo® ParMax™ RCP045-40EPP[6] [7] 6" x 40" CLD 23 MLTPL
SaniFlo Wound[13] [5] CLD 23 MLTPL

[3] Certified sizes are: 2 1/2" O.D. x 4" long through 2 1/2" O.D. x 40" long.
[4] Fulflo Honeycomb Cartridges [A][B][C]-[D][E][F][G][H][I]
    A       - Cartridge Code: M (FDA grade polypropylene)
    B       - Density No: 39R - 8R (1-100 um)
    C       - Nominal Cartridge Length: 3" - 50"
    D       - Nominal Cartridge Diameter: 1" I.D. x 2 1/2" O.D.
              1" I.D. x 2 3/4" O.D.
    E       - Core Material: A (Polypropylene), G (304 Stainless Steel), or S (316 Stainless
               Steel)
    F,G,H,I - non-water contact options (related to packaging)
[5] Evaluated for use in water treatment plant or distribution systems and where the water
    flow exceeds 5450 L/day.
[6] Certified for a minimum daily flow of 28,800 gallons (109,020 liters).
[7] Size is expressed as diameter x length.
[8] Honeycomb Filter Tube: HFT [B][C][D][E]-[F]-[G] 
    B - Density No: 39R - 8R (1-100 um) 
    C - Cartridge Code: M (FDA Grade Polypropylene) 
    D - Nominal Cartridge Length: 10" - 50"
    E - Core Material: A (Polypropylene), G (304 Stainless Steel), or S (316 Stainless
    Steel) 
    F - End Cap Configurations: TC (222 O-Ring/Cap), TF (222 O-Ring/ Fin), TX (222 O-       
         Ring/Flex Fin), DO (Double Open End) 
    G - Seal Options: N (Buna) or E (EPDM)
[9] Poly-Mate Cartridges PMW[A]-[B][C][D]-[Y] and PXDW[A]-[B][C][D]-[Y]
    A - Cartridge code: 005-600
    B - Nominal Length 10" - 40"
    C - Core, A (Natural Polypropylene)
    D - A (Polyethylene Foam), or E (EPR o-ring)
    Y - End Cap Configurations TC, TF, TX, DO
[10] Only products bearing the NSF Mark on the product, product packaging, and/or
     documentation shipped with the product are Certified.
[11] 2.5" OD x 10" long - 2.5" OD x 40" long.
[12] Certified for a minimum flow of 550 liters per day.
[13] SaniFlo Wound element 2.25" diameter X: SFW6[A][B][C]
     SFW - SaniFlo Wound Product
     6   - FDA Polypropylene
     A   - Length nominal A to H (A - 9.875' to H - 40")
     B   - Micron Rating (Winding Density) from 1 micron to 100 micron
     C   - Core material (W - Polypropylene, Y - 304ss, Z - 316ss)


Facility : Windsor, WI

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Microfiltration Devices
Fulflow Ecobond Filter Cartridge [1] CLD 23 PP

[1] Certified sizes are: 2 1/2" O.D. x 10" long through 2 1/2" O.D. x 40" long.



 
Parker Hannifin Corporation 
2340 Eastman Avenue
Oxnard, CA 93030 
United States 
805-604-3400
Visit this company's website

Facility : Tell City, IN

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Microfiltration Devices
Fulflo® MegaBond™ Nominal MBN [A] M [B] - [C] - [D][1] [2] CLD 23 MLTPL

[1] A - Micron rating (0.5-75 um)
    B - Nominal length
        9-4  - 9 3/4"
        10   - 10"
        19-4 - 19 1/2"
        20   - 20"
        29-4 - 29 1/4"
        30   - 30"
        39-4 - 39"
        40   - 40"
        50   - 50"
    C - End cap configuration
        None - double open end - standard plain stick - without gasket
        DO   - dobule open end with gasket
    D - Seal material
        None - double open end - standard plain stick - without gasket
    E - EPDM gasket
[2] Certified for a minimum daily flow of 2808 liters per 10" equivalent.



 
PT. Matahari Putra Makmur 
Jl. Raya Gempol Bangil
Desa Cangkringmalang, Kecamatan. Beji 
Kabupaten Pasuruan, Jawa Timur 67154 
Indonesia 
62 34 365 9926 X28
Visit this company's website

Facility : Jawa Timur, Indonesia

Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings[G]
ELBOW TRILLIUN PUREFLO AW 1/2" - 4" CLD 23 MLTPL
FAUCET ELBOW TRILLIUN PUREFLO AW 1/2" - 3/4" CLD 23 MLTPL
FAUCET ELBOW TRILLIUN PUREFLO METAL INSERT 1/2" - 3/4" CLD 23 MLTPL
FAUCET SOCKET TRILLIUN PUREFLO AW 1/2" - 3/4" CLD 23 MLTPL
FAUCET SOCKET TRILLIUN PUREFLO METAL INSERT 1/2" - 3/4" CLD 23 MLTPL
FAUCET TEE TRILLUN PUREFLO AW 1/2" - 3/4" CLD 23 MLTPL
KNEE TRILLIUN Pureflo AW 1/2" - 1" CLD 23 MLTPL
PLUG TRILLIUN PUREFLO AW 1/2" - 3/4" CLD 23 MLTPL
SOCKET TRILLIUN PUREFLO AW 1/2" - 1 1/2" CLD 23 MLTPL
TEE TRILLIUN PUREFLO AW 1/2" - 1" CLD 23 MLTPL
VALVE SOCKET TRILLIUN PUREFLO AW 1/2" - 1 3/4" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Pipe[G]
PIPA TRILLIUN Pureflo AW 1/2" - 12" CLD 23 PVC
PIPA TRILLIUN Pureflo D 1 1/4" - 12" CLD 23 PVC
uPVC Pipe Trilliun Pureflo 1/2" - 12" CLD 23 PVC

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
RectorSeal 
2601 Spenwick Drive
Houston, TX 77055 
United States 
713-263-8001
Visit this company's website

Facility : # 1 USA

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Thread Compounds
Pure White Teflon Pipe Compound[1] [3] [G] >= 1/2" C. HOT TC

[1] Products were prepared for evaluation according to manufacturer's instructions.
[3] DuPont Registered Trademark.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Rosemount Inc. 
8200 Market Boulevard
Chanhassen, MN 55317-1126 
United States 
952-828-3132

Facility : Nanjing, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Water Meters[1]
Model 8705 TS [C] [D] [E] Magnetic Flowtube[2] .5" - 36" C. HOT MLTPL
Model 8705 [A] [B] [C] [D] [E] Magnetic Flowtube[3] .5" - 36" CLD 23 MLTPL
Model 8711 SS [C] [D] [E] Magnetic Flowtube[2] .5" - 8" C. HOT MLTPL
Model 8750W [A] [B] [C] [D] [E] Magnetic Flowtube[3] .5" - 40" CLD 23 MLTPL
Model 8750W [A][B][C][D][E] Magnetic Flowtube[2] .5" - 36" C. HOT MLTPL

[1] All NSF-61 approved products must have the "DW" option code.
[2] A - Liner type (T)
    B - Electrode material (S or H)
    C - Electrode style (A or E)
    D - Liner size 
        005-360 for 8705
        005-080 for 8711
        005-400 for 8750W
    E - Grounding ring option (G1, G2, G5 or G6)
[3] A - Liner Type (T or N)
    B - Electrode material ( S or H)
    C - Electrode style (A or E)
    D - Liner size (005-360)
    E - Grounding ring option (G1, G2, G5, or G6)


Facility : Chihuahua, Mexico

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Water Meters[1]
Model 8705 [A][B][C][D][E] Magnetic Flowtube[2] .5" - 36" C. HOT MLTPL
Model 8705 [A][B][C][D][E] Magnetic Flowtube[3] [4] 1" - 36" CLD 23 MLTPL
Model 8711S [A][B][C][D][E] Magnetic Flowtube[2] .5" - 36" C. HOT MLTPL
Model 8750W [A][B][C][D][E] Magnetic Flowtube[3] [4] 1" - 36" CLD 23 MLTPL

[1] All NSF-61 approved products must have the "DW" option code.
[2] Water Meter Options:
    A: Liner Type (P or T)
    B: Electrode material (S or H)
    C: Electrode style (A or E)
    D: Liner size (005-360 for 8705)(005-080 for 8711S)
    E: Grounding ring option (G1, G2, G5, or G6)
[3] Certification includes electrodes and optional grounding rings made from 316 Stainless
    Steel or Nickel alloy. Certification does not include grounding rings from any other
    material or lining protectors.
[4] Water Meter Options:
    A: Liner Type (P or T)
    B: Electrode material (S or H)
    C: Electrode style (A or E)
    D: Liner size (005-360)
    E: Grounding ring option (G1, G2, G5, or G6)



 
RVT Process Equipment, Inc. 
9047 Executive Park Drive
Suite 222 
Knoxville, TN 37923 
United States 
865-694-2089
Visit this company's website

Facility : Madisonville, TN

Process Media

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Aeration Packing Material
Hiflow Rings® - PP 5/8" - 3 1/2" CLD 23 PP

NOTE: Certified for water treatment plant applications.
      This product has not been evaluated for point of use applications.


 
S & B Technical Products, Inc. / Terramix S.A. 
1300 East Berry Street
Ft. Worth, TX 76119 
United States 
800-432-8213 
817-923-3344

Facility : Santa Ana, Costa Rica (Hultec)

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Gasket/Sealing Materials
SBR HT 627 Flo Control IPS Gasket[4] 2 1/2" - 8" CLD 23 SBR
SBR HT 727 Flo Control IPS[1] 2 1/2" - 8" CLD 23 SBR

[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[2] Certified for a maximum surface area to volume ratio of 0.127 sq. in./L.
[3] Certification of HT 787 SBR is restricted to use in distribution system
    valves as a material to encapsulate the disc.  The surface area to volume
    ratio cannot exceed the ratio listed under size.
[4] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".



 
Savard Plumbing Co. 
815 Chestnut Street
North Andover, MA 01845-6098 
United States 
800-828-1300 
661-272-4600
Visit this company's website

Facility : Nogales, Sonara, Mexico

Mechanical Plumbing Devices

Trade Designation      

Flexible Plumbing Connectors
PRO-FLO PFX YYXX[1] [G]      

[1] YY indicates:
    7/8" BC x 3/8" C 
    7/8" BC x 7/16" C 
    7/8" BC x 1/2" C
    7/8" BC x 1/2" IP 
    1/4" C x 1/4" C 
    3/8" C X 3/8" Copper
    3/8" C x 3/8" C 
    3/8" C x 1/2" IP 
    7/16" C x 1/2" IP 
    1/2" C x 1/2" C 
    1/2" C x 1/2" IP 
    1/2" IP x 1/2" IP 
    3/4" IP x 3/8" C 
    3/4" IP x 1/2" IP 
    3/8" FL x 1/2" IP
    XX – Indicates length, maximum of 120" for 0.315" diameter flexible connectors. Maximum
         of 100" for 0.375" diameter flexible connectors.
    Fractional sizes may also appear alone with no description.
[2] LFM  - Stainless steel braid 
    LFMF - M-Series flare 
    LFT  - Polyester exterior braid 
    LFTF - T-Series flare 
    End fitting combination: 
    7/8" FBC x 3/8" FCM 
    7/8" FBC x 7/16" FCM 
    7/8" FBC x 1/2" FCM
    7/8" FBC x 1/2" FIP 
    1/4" FCM x 1/4" FCM 
    3/8" FCM x 3/8" Copper 
    3/8" FCM x 3/8" FCM
    3/8" FCM x 1/2" FIP 
    7/16" FCM x 1/2" FIP 
    1/2" FCM x 1/2" FCM 
    1/2" FCM x 1/2" FIP 
    1/2" FIP x 1/2" FIP 
    3/4" FIP x 3/8" FCM 
    3/4" FIP x 1/2" FIP
    3/8" FL x 1/2" FIP
    (2) Length in inches not to exceed 96" with inner diameter of 0.315" for faucet, dish
    washer and toilet connecters. 
    B  - brass insert (barb)
    BB - brass insert with brass ballcock
[3] (3) End fitting combination: 
        3/4" FIP x 3/4" Comp.     
        3/4" FIP x 3/4" FIP 
        3/4" FIP x 3/4" MIP 
        3/4" MIP x 3/4" Comp. 
    (4) LFWM - Length in feet not to exceed 80" with an inner diameter of 0.375".
[4] YY - 3/8" FMC x 3/8" FMC
    XX - Indicates length, 36" - 48" for 0.315" diameter
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Flexible Plumbing Connectors [G]
ProFlo PFX YYXX[2] 3/4" x 3/4" D. HOT MLTPL

[1] All Danco Inc., Plumbmaster, and Thrifty Supply connectors are limited to 84" length.
[2] WH - Water Heater
    S  - Stainless Steel Braid
    (1) Number - End Fitting Combination
        3/4" FIP x 3/4" FIP
        3/4" FIP x 3/4" COMP.
        3/4" FIP x 3/4" MIP
        3/4" MIP x 3/4" COMP.
    XX - Length up to 84”
    YY
    3/4" FIP x 3/4" FIP
    3/4" FIP x 1/2" Copper C
    3/4" FIP x 3/4" Copper C
    3/4" MIP x 1/2" Copper C
    3/4" MIP x 3/4" Copper C
    All products may have LF as a prefix.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Siam Fittings Co., Ltd. 
100/1-100/2 Moo 2
Settakit 1 Road, Omnoi 
74130 Krathumban Samutsakorn 
Thailand 
66 2810 0832 5
Visit this company's website

Facility : Samutsakorn, Thailand

Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings[1] [G]
LF SA Floor Flange (CFF, EFF) 1/2" - 2" D. HOT MLTPL

[1] This copper alloy is Certified by NSF to NSF/ANSI 61 for use in drinking water supplies
    of pH 6.5 and above. Drinking water supplies that are less than pH 6.5 may require
    corrosion control to limit leaching of copper into the drinking water.
[2] 3/8" x 3/8" x 1/2" - 3" x 2" x 2"
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
SK Sensor Co., Ltd. 
45 Gasan digital 1-ro, 15th Floor
E&C Dream Tower, Gasan-Dong 
Geumcheon-Gu, Seoul 153-793 
Republic of Korea 
82 2 867 0760
Visit this company's website

Facility : Seoul, Republic of Korea

Mechanical Plumbing Devices

Trade Designation      

End Point Meter[G]
FLOW SENSOR EBD61625601      

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Spears Manufacturing Company 
15853 Olden Street
P.O. Box 9203 
Sylmar, CA 91342 
United States 
818-364-1611
Visit this company's website

Facility : Sylmar, CA

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[G]
FLO PVC Utility Ball Valves 1/2" - 2" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Tetard Haudiquez Grisoni 
35 Rue Tourniere BP 212
Bethencourt Sur Mer 80535 Friville 
France 
33 3 22 60 20 84
Visit this company's website

Facility : Friville, France

Mechanical Plumbing Devices

Trade Designation      

Faucets[1]
175K/LL K30 ABC Wash Stand Barbara Barry with free-flow pop-up[G]      

[2] A before LL in the trade name indicates no pop-up drain.
[3] The following are different styles of faucets (Aéro, Beacon, Boulevard, Easton) with
    different handle variations:
    F02 Aéro rétro 
    F03 Aéro rétro à manettes 
    F04 Beacon classic à manettes 
    F05 Aero 
    F06 Aero à manettes 
    F08 Beacon classic 
    F11 Boulevard (double Ogee) 
    F12 Boulevard manettes 
    F13 Boulevard Cristal 
    F21 Easton jupe lisse croisillon 
    F22 Easton jupe lisse manette métal 
    F23 Easton jupe lisse manette porcelaine blanche 
    F24 Easton jupe lisse manette porcelaine noire 
    F25 Easton jupe lisse manette bois 
    F26 Easton jupe à pans croisillon 
    F27 Easton jupe à pans manette métal 
    F28 Easton jupe à pans manettes porcelaines 
    F29 Easton jupe à pans manettes porcelaines noire 
    F30 Easton jupe à pans manettes porcelaines noire
[4] XXX - One of the following alpha numeric codes:
          A04, A06, A09, A18, A1B, A1J, A1K, A1L, A1M, A1T, A1U, A1V, A1W, A1X, A23, A28,
          A2A, A2B, A2C, A2E, A2F, A2H, A2J, A2L, A2M, A2N, A2P, A2R, A2S, A2T, A2U, A2V, 
          A2W, A2X, A2Y, A30, A33, A34, A35, A3B, A3C, A3E, A3F, A3G, A49, A51, A52, A53, 
          A54, A55, A56, A57, A58, A59, A6A, A6B, A6G, A6H, A6M, A6N, A6P, A7A, A7B, A7C, 
          A7D, A7E, A7F, A7G, A7L, A8A, A8B, A8C, A8D, A8E, A8F, A8G, A8H, A8J, A8K, A8M, 
          A8N, A8P, A8R, A8S, A95, A9A, A9B, A9C, A9D, A9F, E26, E30, E35, E53, F70, F71, 
          G1T, G1U, GIV, G1W, G03, G04, G08, G11, G13, G14, G17, G18, G24, G26, G29, G2J, 
          G2K, G2L, G2M, G2N, G2P, G2R, G2S, G2T, G2U, G5A, G5B, G5C, G5D, G31, G34, G45,
          G47, G48, G49, G51, G52, G54, G56, G58, G61, G65, G69, G74, G79, G93, J06, J10, 
          J17, J21, J38, J59, J62, K22, K23, K27, K28, K29, K30, K31, K32, K33, K34, K36, 
          K37, K38, K39, K40, U04, U05, U1A, U1D, U13, U1F, U1G, U1H, UIJ, U1K, U1L, U1M, 
          U1N, U1P, U1Q, U1R, U1S, U4A, U4B, U4C, U4D, U4E, U4F, U70, U71, U79, U7A, U7B, 
          U7C, U7D, U7E, U88, V06, V37
[5] F21 thru F30 represent different handle options.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[1] ABC in the trade name represents an alphanumeric code for external finish (A = A thru Z,
    B = 0 thru 9, C = 0 thru 9).



 
Toshiba Corporation Social Infrastructure Systems Company 
1 Toshiba-cho, Fuchu-shi
Tokyo 183-8511 
Japan 
81 42 333 2226

Facility : Chongqing, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Water Meters
Electromagnetic Flowmeter GF63(1)(2)(3)N(4)(5)(6)[1] [G] 1/2" - 18" CLD 23 MLTPL
Electromagnetic Flowmeter LF65(1)(2)(3)(4)(5)N(6)(7)(8)(9)[2] [G] 1/2" - 18" CLD 23 MLTPL
Electromagnetic flowmeter LF65(0)(1)(2)(3)(4)HR(5)AA(6)[3] [G] 4" - 18" D. HOT MLTPL
Electromagnetic flowmeter LF66(0)(1)(2)(3)(4)HR(5)(6)(7)[4] [G] 20" - 120" D. HOT MLTPL

[1] (1) Mounting Style 
        0: Detector / Converter integral type 
        2: Detector / Converter separate type 
    (2) Meter Size 
        01: 1/2", 15mm 
        02: 1", 25mm 
        03: 1 1/4", 32mm 
        04: 1 1/2", 40mm 
        05: 2", 50mm 
        06: 2 1/2", 65mm 
        08: 3", 80mm 
        10: 4", 100mm 
        12: 5", 125mm 
        15: 6", 150mm 
        20: 8", 200mm 
        25: 10", 250mm 
        30: 12", 300mm 
        35: 14", 350mm 
        40: 16", 400mm 
        45: 18", 450mm 
    (3) Connection flange standard 
    (4) Electrode material 
        B: 316L stainless steel 
        C: Ti (titanium)
        F: Hastelloy C
    (5) Flow and calibration velocity range 
    (6) Grounding ring 
        1: Without Grounding rings 
        2: With Grounding rings 
    * Grounding rings are optional in this model. When present, they will be the same       
       material as the electrode.
[2] (1) Type 
        0: Normal type 
        4: Hazard location certification type 
    (2) Meter Size 
        D: 1/2", 15mm 
        E: 1", 25mm 
        F: 1 1/2", 40mm 
        G: 2", 50mm 
        H: 3", 80mm 
        J: 4", 100mm 
        K: 6", 150mm 
        L: 8", 200mm 
        M: 10", 250mm 
        N: 12", 300mm 
        P: 14", 350mm 
        Q: 16", 400mm 
        R: 18", 450mm 
        S: 1 1/4", 32mm
        U: 5", 125mm 
        W: 2 1/2", 65mm
    (3) Mounting Style 
        L: Detector/Converter integral type 
        M: Detector/Converter separate type 
    (4) Connection flange standard 
    (5) Electrode material 
        B: 316L stainless steel 
        C: Ti (titanium)
        F: Hastelloy C
    (6) Grounding ring material 
        C: 316 stainless steel 
        D: 316L stainless steel 
        E: Ti (titanium)
        H: Hastelloy C
    (7) Flow and calibration velocity range 
    (8) Excitation and signal cables 
    (9) Coating (External)
[3] LF65 models
    (0) Type
        0 - Normal type
        4 - Hazard location Certification type
    (1) Size inches(mm)
        J - 4 (100mm)
        U - 5 (125mm)
        K - 6 (150mm)
        L - 8 (200mm)
        M - 10 (250mm)
        N - 12 (300mm)
        P - 14 (350mm)
        Q - 16 400mm)
        R - 18 (450mm)
    (2) Mounting style
        L - Detector/Converter combined type
        M - Detector/Converter separate type
    [3] Connection flange standard, overall length
        C - ANSI 150, ISO length
        D - ANSI 300, ISO length
        G - DIN PN 10, ISO length
        H - DIN PN 16, ISO length
        1 - ANSI 150, Toshiba length
        2 - ANSI 300, Toshiba length
        5 - DIN PN 10, Toshiba length
        6 - DIN PN 16, Toshiba length
        Z - Other
    (4) Electrode material
        B - 316L stainless steel
        C - Ti (titanium)
        F - Hastelloy C
    (5) Grounding Ring Material
        C - 316 stainless steel
        D - 316L stainless steel
        E - Ti (titanium)
        H - Hastelloy C
    [6] Coating (External)
[4] LF66 Models
    (0) Type
        0 - Normal type
        4 - Hazard location Certification type
    (1) Size inches (mm)
        50 - 20 (500mm)
        60 - 24 (600mm)
        70 - 28 (700mm)
        75 - 30 (750mm)
        80 - 32 (800mm)
        90 - 36 (900mm)
        A0 - 40 (1000mm)
        A1 - 42 (1050mm)
        A2 - 48 (1200mm)
        A3 - 54 (1350mm)
        A4 - 56 (1400mm)
        A5 - 60 (1500mm)
        A6 - 64 (1600mm)
        A7 - 66 (1650mm)
        A8 - 72 (1800mm)
        A9 - 78 (1950mm)
        B0 - 80 (2000mm)
        B2 - 88 (2200mm)
        B4 - 96 (2400mm)
        B6 - 104 (2600mm)
        B8 - 112 (2800mm)
        C0 - 120 (3000mm)
    (2) Mounting style
        L - Detector/Converter combined type
        M - Detector/Converter separate type
    [3] Connection flange standard, overall length
        A - AWWA class D (over 28)
        C - ANSI Class 150 ( up to 24)
        B - EN 1092-1 PN6 (DIN)
        E - EN 1092-1 PN10 (DIN)
        J - JIS 10K
    (4) Electrode Material
        K - AISI 316L
        C - Titanium
        F - Hastelloy C
    (5) Grounding Ring Material
        A - Not provided
        K - AISI 316 (Option)
        E - Titanium (Option)
        H - Hastelloy C (equivalent) (Option)
    (6) Settable flow rate and calibration flow range rate
    (7) Structure and Coating (External)
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Tribal Manufacturing, Inc. 
450 Leggitt Road
Marshall, MI 49068 
United States 
269-781-3901
Visit this company's website

Facility : Marshall, MI

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Backflow Preventers[G]
F217A Water Regulator 3/4" x 3/4" CLD 23 MLTPL
F217B Water Regulator 3/4" x 3/4" CLD 23 MLTPL
F217C Water Regulator 3/4" x 3/4" CLD 23 MLTPL
F217D Water Regulator 3/4" x 3/4" CLD 23 MLTPL
G-784 Backflow Preventer 1/2" x 1/2" CLD 23 MLTPL
G-784-10A Backflow Preventer 1/2" x 1/2" CLD 23 MLTPL
G-784-13A Backflow Preventer 3/4" x 1/2" CLD 23 MLTPL
G-784-8A Water Fill Assembly 1/2" x 1/2" CLD 23 MLTPL
G-784-9A Backflow Preventer 1/2" x 1/2" CLD 23 MLTPL
RV790-1 Water Regulator 3/4" x 3/4" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[1] Certified as a component of a manifold for a maximum of 22 adapters per liter for cold
    applications and a maximum of 16 adapters per liter for hot applications.


 
U.S. Composite Pipe South, LLC 
18585 Samuels Road
Zachary, LA 70791 
United States 
225-658-6166

Facility : Zachary, LA

Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings
Flowtite Fittings with REKA Gaskets 12" - 96" CLD 23 MLTPL

Pipe
Flowtite Pipe 12" - 96" CLD 23 FRP



 
ValvSource Equipment Ltd. 
4080-B Sladeview Crescent
Unit 2 
Mississauga, ON L5L 5Y5 
Canada 
905-608-2200
Visit this company's website

Facility : Shangdong Province, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[1]
(a)(b)2(c)4535(d) Flow+ Resilient Seated Butterfly Valves 4" - 48" CLD 23 MLTPL

[1] (a) Any value 04-48; refers to the valve size in inches.
    (b) Refers to the style of valve; B - Wafer, C - Lug.
    (c) Refers to the pressure rating; 2 - 285 PSI max, 4 - 250 PSI max.
    (d) 3 - lever operated valve, 5-gear operated valve.



Viega LLC. 
The Epic Center
301 North Main Street 
Suite 900 
Wichita, KS 67202-4809 
United States 
800-774-5237 

Facility : Ennest, Germany

Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings
# 2812.2ZL Lead Free Pureflow PEX Press Fittingsµ [G] 3/8" - 1" C. HOT BRONZE
# 2813.5ZL Lead Free Pureflow PEX Press Fittingsµ [G] 3/8" - 1" C. HOT BRONZE
# 2814.2ZL Lead Free Pureflow PEX Press Fittingsµ [G] 3/8" - 1" C. HOT BRONZE
# 2816ZL Lead Free Pureflow PEX Press Fittingsµ [G] 3/8" - 1" C. HOT BRONZE
# 2818.2ZL Lead Free Pureflow PEX Press Fittingsµ [G] 3/8" - 1" C. HOT BRONZE
# 2818.3ZL Lead Free Pureflow PEX Press Fittingsµ [G] 3/8" - 1" C. HOT BRONZE
# 2818ZL Lead Free Pureflow PEX Press Fittingsµ [G] 3/8" - 1" C. HOT BRONZE
# 2825.5ZL Lead Free Pureflow PEX Press Fittingsµ [G] 3/8" - 1" C. HOT BRONZE

µ Product Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and Viega
  FostaPEX tubing only.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Facility : Grossheringen, Germany

Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings
# 2811ZL Lead Free Pureflow PEX Press Fittingsµ [G] 3/8" - 2" C. HOT BRONZE
# 2812ZL Lead Free Pureflow PEX Press Fittingsµ [G] 3/8" - 2" C. HOT BRONZE
# 2813.1ZL Lead Free Pureflow PEX Press Fittingsµ [G] 3/8" - 2" C. HOT BRONZE
# 2813.2ZL Lead Free Pureflow PEX Press Fittingsµ [G] 3/8" - 2" C. HOT BRONZE
# 2813.5ZL Lead Free Pureflow PEX Press Fittingsµ [G] 3/8" - 2" C. HOT BRONZE
# 2813PZL Lead Free Pureflow PEX Press Fittingsµ [G] 3/8" - 2" C. HOT BRONZE
# 2814.5ZL Lead Free Pureflow PEX Press Fittingsµ [G] 3/8" - 2" C. HOT BRONZE
# 2814ZL Lead Free Pureflow PEX Press Fittingsµ [G] 3/8" - 2" C. HOT BRONZE
# 2815ZL Lead Free Pureflow PEX Press Fittingsµ [G] 3/8" - 2" C. HOT BRONZE
# 2816ZL Lead Free Pureflow PEX Press Fittingsµ [G] 3/8" - 2" C. HOT BRONZE
# 2818ZL Lead Free Pureflow PEX Press Fittingsµ [G] 3/8" - 2" C. HOT BRONZE
# 2856ZL Lead Free Pureflow PEX Press Fittingsµ [G] 3/8" - 2" C. HOT BRONZE

µ Product Listed for use with ViegaPEX, ViegaPEX ULTRA, ViegaPEX Barrier, and Viega
  FostaPEX tubing only.
[1] Copper Fitting (Alloy C12200) is Certified by NSF to NSF/ANSI Standard 61 for public
    water supplies meeting, or in the process of meeting, the U.S. EPA Lead and Copper Rule
    (56FR 26460, June 7, 1991). Water supplies with pH less than 6.5 may require corrosion
    control to limit copper solubility in drinking water.
[3] Certified for SS 316/SS 316L only.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Watts Plumbing Technologies (Taizhou) Co., Ltd. 
815 Chestnut Street
North Andover, MA 01845 
United States 
978-689-6249

Facility : # 1 Zhejiang, China

Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Flexible Plumbing Connectors [G]
Pro-Flo PFX210962[1] 3/4" x 3/4" D. HOT MLTPL
Pro-Flo PFX210963[1] 3/4" x 3/4" D. HOT MLTPL

[1] Connectors come in 12, 15, 18, and 24 inch lengths.
[2] The naming convention is as follows: 
    XX - Length in inches
    Prefix:
    BF 	- Bog flow
    C   - Connector 
    CTS - Copper tube size
    E   - Electric 
    F   - Female iron pipe
    FIP - Female iron pipe 
    G   - Gas
    H   - Heater 
    K   - Kit
    LF  - Lead free
    LBF - Large big flow 
    Q   - Quick connect 
    S   - Softener 
    -S- - Stainless 
    W   - Water
    Suffixes: 
    Certified for a maximum length of 60"
    A  - 7/8 Anderlign fitting x 3/4 FIP fittings 
    AA - Anderlign fitting at both ends 
    AF - Anderlign fitting and female fitting
    AM - Anderlign fitting and male fitting
    B  - 5/8 Anderlign fitting x 3/4 FIP fittings 
    C  - 3/4 FIP x 3/4 MIP fittings 
    D  - 7/8 Anderlign fitting x 3/4 MIP fittings 
    E  - 5/8 Anderlign fitting x 3/4 MIP fittings 
    F  - 1/2 C fitting x 5/8 C fitting 
    FF - Female fitting at both ends 
    FM - Female fitting and male fitting 
    G  - 1/2 FIP fitting x 3/4 FIP GH fittings 
    GH - Female fitting
[3] LF - Lead free
    S  - Stainless steel braid
    WH - Water heater
    (X) End fitting combination
        1 - 3/4" FIP x 3/4" FIP
        2 - 3/4" FIP x 3/4" COMP.
        3 - 3/4" FIP x 3/4" MIP
        4 - 3/4" MIP x 3/4" COMP.
    YY - Length up to 84".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Watts Regulator Company 
815 Chestnut Street
North Andover, MA 01845 
United States 
978-689-6249

Facility : Woodland, CA

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Backflow Preventers [G]
(1)-DBF-(2)-(3)(4)(5)-(6)(7)[1] 2" - 48" CLD 23 MLTPL
757-X-YY-ZZ-TT[2] 2 1/2" - 10" CLD 23 MLTPL
757a-X-YY-ZZ-TT[2] 2 1/2" - 10" CLD 23 MLTPL
767-X-YY-ZZ-TT[2] 2 1/2" - 10" CLD 23 MLTPL
767a-X-YY-ZZ-TT[2] 2 1/2" - 10" CLD 23 MLTPL
957-X-YY-ZZ-TT[2] 2 1/2" - 10" CLD 23 MLTPL
957a-X-YY-ZZ-TT[2] 2 1/2" - 10" CLD 23 MLTPL
967-X-YY-ZZ-TT[2] 2 1/2" - 10" CLD 23 MLTPL
967a-X-YY-ZZ-TT[2] 2 1/2" - 10" CLD 23 MLTPL

[1] (1) Size: 02-48
    (2) Body style
        03 - Lug
        04 - Wafer
    (3) Body material
        1 - Cast iron
        2 - Ductile iron
    (4) Disc material
        2 - Aluminum bronze
        3 - SS 316
    (5) Shaft material
        1 - Stainless steel 416
        2 - Stainless steel 316
        3 - Stainless steel 431
    (6) Seat material
        1 - EPDM (Canada)
        4 - EPDM (US)
    (7) Operator
        0 - No handle
        5 - Standard handle (10-position)
        G - Gear operator 
        P - Positioning/locking kit with handle
[2] X - Valve pattern            
        Blank - Straight                        
        N - N pattern                           
        Z - Z pattern
    YY - Backflow shutoff designation where 2 per units may be mixed like NRS x PIV  
         BFG  - Butterfly valve
         DNRS - Domestic non-rising stem gate 
         DOSY - Domestic outside stem and yoke gate  
         DPIV - Domestic post indicator gate                    
         NRS  - Non-rising stem gate
         OSY  - Outside stem and yoke gate                      
         PIV  - Post indicator gate
         QT   - Quarter turn ball valve
    ZZ - Inlet and outlet connections                   
         Blank - Flange by flange 
         FxG   - Flange by groove
         GxF   - Groove by flange
         GxG   - Groove by groove
    TT - Strainer options
         Blank - No strainer
         S     - 77F-DI-FDA-125 strainer
         S-SS  - Stainless strainer 8000F
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Watts Regulator Company 
815 Chestnut Street
North Andover, MA 01845 
United States 
978-689-6165
Visit this company's website

Facility : Kansas City, MO

Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Pipe[G]
PlumbFLOW 1/8" - 2" C. HOT PEX
RadiantFLOW 1/8" - 2" C. HOT PEX

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Facility : Franklin, NH

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Backflow Preventers [G]
(XX)007-YY-ZZ[1] [2] 1/2" CLD 23 MLTPL
(XX)007M1-YY-ZZ[1] [2] 1" - 2" CLD 23 MLTPL
(XX)007M2-YY-ZZ[1] [2] 1 1/4" - 1 1/2" CLD 23 MLTPL
(XX)007M3-YY-ZZ[1] [2] 3/4" CLD 23 MLTPL
(XX)009-YY-ZZ[1] [2] 1/4" - 1/2" CLD 23 MLTPL
(XX)009M2-YY-ZZ[1] [2] 1" - 2" CLD 23 MLTPL
(XX)009M3-YY-ZZ[1] [2] 3/4" CLD 23 MLTPL
LF07SU2-2 1 1/2" , 2" C. HOT MLTPL
LF709[1] [3] 2 1/2" - 10" CLD 23 MLTPL
LF719[4] 1/2" - 2" CLD 23 MLTPL
LF7R[1] [5] 1/2" - 1" C. HOT MLTPL
LF850(1)(2)[6] 2 1/2" - 10" CLD 23 MLTPL
LF860(1)(2)[6] 2 1/2" - 10" CLD 23 MLTPL
LF909[1] [3] 2 1/2" - 6" CLD 23 MLTPL
LF909-X[1] [7] 3/4" - 1" CLD 23 MLTPL
LF909M1[1] [3] 8" - 10" CLD 23 MLTPL
LF909M1-X[1] [7] 1 1/4" - 2" CLD 23 MLTPL
LF919[4] 1/2" - 2" CLD 23 MLTPL
LFU007-YY-ZZ[1] [2] 1/2" CLD 23 MLTPL
LFU007M1-YY-ZZ[1] [2] 1" - 2" CLD 23 MLTPL
LFU007M2-YY-ZZ[1] [2] 3/4" - 1 1/2" CLD 23 MLTPL
LFU009-YY-ZZ[1] [2] 1/2" CLD 23 MLTPL
LFU009M2-YY-ZZ[1] [2] 3/4" - 2" CLD 23 MLTPL

[1] Products have a marking exemption which allow product NSF-61 Marking and labels bearing
    the <= 0.25%.
[2] XX - LF - Lead free
         SS - Stainless steel
    YY - LF - Supplied without shut-off valves
         QT - Supplied with shut-off valves
         PC - Poly coated
    ZZ - Any combination of the following:
         AG - Air gap
         Blank - Standard unit
         BC - Brass cap
         CT (or C & T) - Cap and teather
         LH - Locking handles
         S  - Strainer (LF777SI) 
         SH - Stainless handles
         Z3 - Stainless handles and nuts
         Z4 - Non-removable handles
         Z5 - Special dipped test cock adapter
[3] Suffixes may consist of the following:
    LF   - Assembly ships without isolation shut-off valves
    NRS  - Non-rising stem
    DNRS - Domestic non-rising stem
    OSY  - Outside stem and yoke
    DOSY - Domestic outside stem and yoke
    -S   - FDA model 77F-DI-FDA-125
    AG   - Air gap
[4] Products may include one or more of the following prefixes or suffixes:
    S - Lead Free Strainer
    LF (as suffix) - Less fitting
    LF (as prefix) - Lead free
    QT - Quarter turn ball valve
    Options for non-wetted:
    AG    - Air gap
    C & T - Cap and tether test cock covers
    LH    - Locking handled ball valves
    SH    - Stainless handled ball valves
[5] Two suffix codes, denoting the connections, follow the LF7R. 
    2:  NPTF; female pipe connection [not a union] (1/2", 3/4", 1") 
    3:  NPTM; male pipe connection [not a union] (3/4")
    5:  Meter thread male pipe connection [not a union] (1")
    U2: NPTF female union pipe connection (1/2", 3/4", 1") 
    U3: NPTM; male union pipe connection (3/4") 
    U4: Meter thread female union pipe connection (3/4")
    10: Meter thread union connection (1")
[6] Suffixes may consist of:
    (1) Isolation Shut-off Valve Options: 
        LG   - Assembly ships without isolation shut-off valves 
        NRS  - Non-rising stem 
        DNRS - Domestic mon-rising stem 
        OSY  - Outside stem and yoke 
        DOSY - Domestic outside stem & yoke 
    (2) Installation Option:
        LH - Test cocks mounted for right-to-left flow installation
[7] (X) - Any combination of the following, appearing in the order below:
          AG - Air gap
          HW - Stainless steel check modules for harsh water conditions
          LF - Without shut-off valves
          QT - Quarter turn ball valves
          S  - Strainer
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Facility : Ningbo, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Backflow Preventers[1] [2] [G]
LF850 1/2" - 2" CLD 23 MLTPL
LF850U 1/2" - 2" CLD 23 MLTPL
LF860 1/2" - 2" CLD 23 MLTPL
LF860U 1/2" - 2" CLD 23 MLTPL

[1] Products have a marking exemption which allow product NSF-61 Marking and labels bearing
    the <= 0.25%.
[2] Product may have box stickers or temporary tags with the following configuration
    descriptions. 
    LF850 / LF850U: 
    QT - Quarter Turn Ball Valve 
    DC - Double Check Assembly 
    LF860 / LF860U: 
    QT - Quarter Turn Ball Valve 
    RP - Reduced Pressure Assembly 
    RPZ - Reduced Pressure Zone
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
William H. Harvey Company 
4334 South 67th Street
Omaha, NE 68117 
United States 
800-228-9681 
402-331-1175

Facility : Omaha, NE

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Brazing/Solders/Fluxes
ProFlo Solder Paste >= 1/2" C. HOT FLX

Sealants
Proflo TFE Paste >= 1/2" C. HOT EPOXY



 
Xylem Water Solutions Zelienople LLC 
227 South Division Street
Zelienople, PA 16063 
United States 
724-452-6300
Visit this company's website

Facility : Fombell, PA

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Miscellaneous Process Devices/Components
FRP Float Assembly[1] N/A CLD 23 MLTPL

[1] Minimum Flow: 43 gallons/min/sq ft water contact surface area.
[2] Certified for a minimum daily flow of 1,152,000 gallons.
[3] Certified for a minimum flow rate of 16,000 liters per day per square foot of filter
    area.



 
Yong Shiang Industrial Co., Ltd. 
No. 24, Section 5, Lu Tsao Road
Lukang Changhua Hsien 
Taiwan 
886 4 7711 3040

Facility : Lukang Changhua Hsien, Taiwan

Mechanical Plumbing Devices

Trade Designation      

Miscellaneous Faucet Components
YS45-216-H High Flow Cartridge[G]      

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Zurn Wilkins 
1747 Commerce Way
Paso Robles, CA 93446 
United States 
805-238-7100
Visit this company's website

Facility : Paso Robles, CA

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Backflow Preventers [G]
Model 350 Double Check Valve[1] 2 1/2" - 12" CLD 23 MLTPL
Model 350XL Double Check Valve 3/4" - 1" CLD 23 MLTPL
Model 350XL Double Check Valve 1 1/4" - 2" CLD 23 MLTPL
Model 375 Reduced Pressure Principle Assembly[1] 2 1/2" - 10" CLD 23 MLTPL
Model 375ST Reduced Pressure Principle 1/2" - 1" CLD 23 MLTPL
Model 375XL Reduced Pressure Principle 1/2" - 1" CLD 23 MLTPL
Model 375XL Reduced Pressure Principle 1 1/4" - 2" CLD 23 MLTPL
Model 450 Double Check Valve[2] 2 1/2" - 10" CLD 23 MLTPL
Model 460XL Spill-Resistant Pressure Vacuum Breaker Assembly 3/8" - 1" CLD 23 MLTPL
Model 475 Reduced Pressure Principle Assembly[2] 2 1/2" - 10" CLD 23 MLTPL
Model 700XL Dual Check Valve[3] 1/4" - 1" CLD 23 MLTPL
Model 705 Dual Check Valve[4] 3/4" - 1" CLD 23 MLTPL
Model 950XLT2 Top Access Double Check Valve[5] 3/4" - 2" CLD 23 MLTPL
Model 975XL2 Reduced Pressure Principle Assembly[6] 1/4" - 2" CLD 23 MLTPL

[1] Models 350 and 375 are Certified for the following optional product suffixes in any
    combination:
    (no suffix) – Includes flanged body with Model 48 NRS Gate Valves (FXF)(GXF)
    A     – Includes grooved body with Model 48 NRS Gate Valves (GXG)(GXF) (2 1/2" - 10")
    AR    – Includes grooved body with stainless steel or epoxy coated steel retrofit spool 
            (2 1/2" - 10")
    AST   – Includes stainless steel grooved body (2 1/2" - 10")
    L     – Shutoff valves not included with assembly
    OSY   – Includes OSY gate valves instead of NRS gate valves (FXF)(GXF)(GXG)
    BGVIC – Includes Victaulic butterfly valve shutoffs instead of gate valves, only used
            with the 'A' option grooved body (GXG)
    DOM   – Includes Clow gate valves instead of Model 48 gate valves (NRS or OSY (FXF)
            (GXF)(GXG))
    BG    – Includes Model 49 butterfly valve shutoffs instead of gate valves, only used 
            with the 'A' option grooved body (GXG)
    BF    – Includes Model 49 butterfly valve shutoffs instead of gate valves, only used 
            with the 'A' option grooved body (GXF)
    DA    - Includes detector assembly (bypass)
[2] Models 450 and 475 Certified for the following optional product suffixes in any
    combination:
    (no suffix) – Includes grooved body with Model 48 NRS Gate Valves (GXG)(GXF)
    L     – Shutoff valves not included with assembly
    OSY   – Includes OSY gate valves instead of NRS gate valves (GXF)(GXG)
    BGVIC – Includes Victaulic butterfly valve shutoffs instead of gate valves (GXG)
    DOM   – Includes Clow gate valves instead of Model 48 gate valves (NRS or OSY
    (GXF)(GXG))
    BG    – Includes Model 49 butterfly valve shutoffs instead of gate valves (GXG)
    BF    – Includes Model 49 butterfly valve shutoffs instead of gate valves (GXF)
    DA    - Includes detector assembly (bypass)
[3] Models are named as [A][B]X[A][B]-700XL where: 
    [A] indicates end connection diameter 
        14 - 1/4"
        38 - 3/8"
        12 - 1/2"
        34 - 3/4"
        1 - 1"
    [B] indicates end connection type 
        F or UF   - Female NPT
        M or UM   - Male NPT
        FM or UFM - Female meter connection
        MM or UMM - Male meter connection
        FC or UFC - Female copper
        The 'U' designates a union connection between the end connection and the meter body.
[4] Models are named as [A][B]X[A][B]-705 where: 
    [A] Indicates end connection diameter 
        34 - 3/4" 
        1  - 1" 
    [B] Indicates end connection type 
        F or UF - Female NPT 
        UFC - Female Copper 
        UFM - Female Meter connection 
    The 'U' designates a union connection between the end connection and the meter body.
[5] Models are named as [A]-950XLT2 where:
    [A] Indicates end connection diameter
        34  - 3/4"
        1   - 1"
        114 - 1 1/4"
        112 - 1 1/2"
        2   - 2"
    Certified for the following optional product suffixes:
    FT - With Fast-Test test cocks
    L  - Less ball valves
    S  - With wye strainer
    Certification does not include the following optional product suffixes:
    U - Union ball valves
[6] Models are named as [A]-975XL2 where:
    [A] Indicates end connection diameter
        14  - 1/4"
        38  - 3/8"
        12  - 1/2"
        34  - 3/4"
        1   - 1"
        114 - 1 1/4"
        112 - 1 1/2"
        2   - 2"
    Certified for the following optional product suffixes on the 1/4" - 1/2" valves:
    FT - With inegral male 45° flare SAE test fitting
    L  - Less shut-off valves
    Certified for the following optional product suffixes on the 3/4" - 2" valves:
    BMS - With battery operated monitor switch
    FT  - With integral male 45° flare SAE test fitting, also known as fast test test cocks
    L  - Less ball valves
    MS - With integral relief valve monitor switch
    S  - With wye strainer
    SE - With street elbows
    V  - With union swivel elbows
    Certification does not include the following optional product suffixes:
    TCU - Test cocks up
    U   - Union ball valves
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Number of matching Manufacturers is 81
Number of matching Products is 676
Processing time was 2 seconds