NSF Product and Service Listings

[1] Certified for a maximum surface area to volume ratio of 0.8 sq. in./L when used at Cold
    (23°C) temperature.

[1] Certified for a maximum surface area to volume ratio of 0.3 sq. in./L when used at
    Commercial Hot (82°C) temperature.
[2] Certified for a maximum surface area to volume ratio of 0.8 sq. in./L when used at Cold
    (23°C) temperature.

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 square inches/L.
[2] Certified for a maximum surface area to volume ration of 2.0 square inches/L.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.2 square inches/L.
[2] Certified for a maximum surface area to volume ratio of 2.0 square inches/L.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[3] Valves 27-160-9176(Y)(XX)-05:
    Y  - Bolting Material	
         1 - 316 bolting
         3 - 304 bolting
    XX - Description of non-wetted options
         29 – Sherwin-Williams Red Oxide. Int. and ext.
         34 – Sherwin-Williams Red Oxide. Holiday free Int. and no holiday free ext.
         35 – Sherwin-Williams Red Oxide. Holiday free Int. and holiday free ext.
         87 – Sherwin-Williams Red Oxide. Int. and Polyurethan ext.
         88 – Sherwin-Williams Red Oxide. Holiday free Int. and Polyurethan ext.
[4] Acceptable order codes for interior coating are 00, 01, 03, 08, 13, 29 and 53.
[5] Certified for resilient seat to epoxy coated ductile iron seat. Certified for valves
    with no external actuation, lever and spring actuation, and lever and weight actuation.
[6] Certified for use in distribution systems only.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.2 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] XX and YY refer to the size in inches.
[2] Certified for use in distribution systems only.
[3] 2500 series valves are certified with the following optional connection types:
    (A)   - ALPHA
    (AX)  - ALPHA XL
    (F)   - Flanged (ANSI Class 125)
    (F2)  - Flanged (ANSI Class 250 with raised face)
    (F3)  - Flanged (PN16 with raised face)
    (F4)  - Flanged (PN16 with flat face)
    (FB)  - Flanged (ANSI Class 250 with flat face)
    (FX)  - Flex Ring
    (MJ)  - Mechanical Joint
    (PO)  - Push-on
    (PVC) – PVC
    (RF)  - Flanged (ANSI Class 150 with raised face)
    (S)   - Threaded (NPT)
    (TM)  - Tapping flanged by mechanical joint
    (TYT) – Tyton
    
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[2] XX and YY refers to the size in inches.
[3] Certified for use in distribution systems only.
[4] 2500 and 3500 series valves are certified with the following optional connection types:
    (A)   - ALPHA
    (AX)  - ALPHA XL
    (F)   - Flanged (ANSI Class 125)
    (F2)  - Flanged (ANSI Class 250 with raised face)
    (F3)  - Flanged (PN16 with raised face)
    (F4)  - Flanged (PN16 with flat face)
    (FB)  - Flanged (ANSI Class 250 with flat face)
    (FX)  - Flex Ring
    (MJ)  - Mechanical Joint
    (PO)  - Push-on
    (PVC) – PVC
    (RF)  - Flanged (ANSI Class 150 with raised face)
    (S)   - Threaded (NPT)
    (TM)  - Tapping flanged by mechanical joint
    (TYT) – Tyton
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[3] XX refers to the size of the valve in inches and may be 03, 04, 06, 08, 10, 12, 14, or
    16.
[4] Certified for use in distribution systems only.
[5] 2100 series check valves are certified with the following optional connection types:
    - Flanged 
    - Mechanical Joint
    - Mechanical Joint Plain End
[6] XX and YY refer to the size in inches.
[7] 2500 and 3500 series valves are certified with the following optional connection types:
    (A)	  - ALPHA
    (AX)  - ALPHA XL
    (F)   - Flanged (ANSI Class 125)
    (F2)  - Flanged (ANSI Class 250 with raised face)
    (F3)  - Flanged (PN16 with raised face)
    (F4)  - Flanged (PN16 with flat face)
    (FB)  - Flanged (ANSI Class 250 with flat face)
    (FX)  - Flex Ring
    (MJ)  - Mechanical Joint
    (PO)  - Push-on
    (PVC) – PVC
    (RF)  - Flanged (ANSI Class 150 with raised face)
    (S)   - Threaded (NPT)
    (TM)  - Tapping flanged by mechanical joint
    (TYT) – Tyton
[8] The Swing Check Valve - Series 52 SC may use a "lever and weight" or "lever and spring"
    option.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] The filtration level (micron) and color which are used in each SK filter and may be any
    of the following:
    10  - Light Blue
    20  – Grey
    40  - Purple
    55  – Green
    70  – Brown
    100 – Black
    130 – Red
    200 – Yellow
    400 – Blue
[2] The spring type may be any of the following alphabetic codes:
    HALAR    – HALAR Coating
    HSL      - Hastelloy
    LC       - Low Cost Energy
    LC-HALAR – Low-Cost Energy – HALAR Coating
    LCHSL    - Hastelloy-Low Cost Energy
    Regular (not indicated on product name)
[3] Inlet / outlet type may be any of the following:
    ARF - Flange
    Int - Integral
    Thr - Threaded
    Vic - Victaulic
[4] Certified for a minimum flow of 72,000 L/day.
[6] Certified for a minimum flow of 1,150,200 L/day.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Product is certified for a minimum daily flow of 2,400,000 liters.
[2] These products have filtration levels of 10-800 microns.
[3] Certified for a minimum daily flow of 300,000 liters.
[4] Certified products are evaluated as POE systems.
[5] These products have filtration levels of 10-500 microns.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[11] Models EBS 10000 DW and EBS 15000 DW are certified for configurations O/L and I/L.

[1] Certified for SS316/CF8M and PTFE materials only.
[2] Certified for SS316/CF8M body, SS316 seat ring, and FKM and PTFE/RTFE seals only.

[1] Certified for a maximum of 1750 Kg of aggregate per cubic meter of concrete in a tank
    size of 200 gallons or greater.

[1] Certified for a maximum of 1750 Kg of aggregate per cubic meter of concrete in a tank
    size of 200 gallons or greater.

[1] Fitting packaging is coded by the following convention:
     X indicates packaging:
      0 - Bulk pack
      1 - Blister pack
      3 - Single bag
      5 - Flag tagged
[2] Fitting sizes are coded by the following convention:
     XX, YY, and ZZ indicate size:
      02 - 1/8"
      03 - 3/16"
      04 - 1/4"
      05 - 5/16"
      06 - 3/8"
      08 - 1/2"
      10 - 5/8"
      12 - 3/4"
      14 - 7/8"
      16 - 1"
      24 - 1.5"
      32 - 2"
      40 - 2.5"
      48 - 3"
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] This product is also evaluated for use in Mechanical Plumbing Device applications with a
    maximum use restriction of 10.0 sq. in./L.
[2] Certified for a maximum surface area to volume of 10 sq. in./L.

[1] Certified for use in valves 1" - 120".
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[LL] Product conforms with lead content requirements for “lead free” plumbing as defined by
     California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water
     Act.

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.1 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.

[1] 12X X-X -X-X-X -X-X -01, Metal Double lock Shower hose, Size:DN8, F1/2 x F1/2
    Note:
    1st X - Code for hose end use
            1 – Shower Hose
            0 – Other
    2nd & 3rd X - length (20 - 72 inches)
    4th X - Code for the hose color
            01 - Polish Stainless Steel hose
            02 - Chrome Plating Stainless Steel hose
            03 - PB Stainless Steel hose
            04 - BNP Stainless Steel hose
            05 - PVD Stainless Steel hose
            06 - Black Stainless Steel hose
            07 - White Stainless Steel hose
            08 - Copper Stainless Steel hose
            09 - Chrome Plating Brass hose
            10 - PB Brass hose
            11 - BNP Brass hose
            12 - PVD Brass hose
            13 - Black Brass hose
            14 - White Brass hose
            15 - Copper Brass hose
    5th X - Code for inlet
            1 - F1/2 Brass R-crossline nut
            2 - F1/2 Brass R-crossline nut (O-Ring)
            3 - F1/2 Brass R-hexagon nut
            4 - F1/2 Brass knurling nut
            5 - F1/2 Brass knurling nut (trapeziform)
            6 - F1/2 Brass straight-knurling nut
            7 - F1/2 Brass hexagon nut
    6th X - Code for outlet
            1 - F1/2 Brass R-crossline nut
            2 - F1/2 Brass R-crossline nut (O-Ring)
            3 - F1/2 Brass swivel R-crossline nut
            4 - F1/2 Brass swivel R-crossline nut (O-Ring)
            5 - F1/2 Brass knurling R-crossline nut
            6 - F1/2 Brass knurling swivel R-crossline nut
    7th X - Nut finish
            1 - Polish
            2 - Chrome Plating
            3 - PB
            4 - BNP
            5 - PVD
            6 - Black
            7 - White
            8 - Red-bronze
    8th X - Nipple material
            0 - Brass
            2 - Stainless Steel
[2] 137- X-X -X -X -X-X-X
    
    1st & 2nd X - Length (3.9 - 80in)
    
    3rd X - Code for the Finish
            02 - Grey
            04 - Black
    
    4th X - Code for fittings used
            01 - F1/2
            02 – F1/4
            03 - F3/4
            04 – F3/8
            05 - F5/8
            06 – F7/8
            07 – F7/8 Plastic Nut
            08 - F7/16
            09 – F9/16
            10 - F11/16
            11 - F15/16
            12 - F15/16 Plastic Nut
            13 - F1
            14 - F15
            15 - F16
            16 - F18
            17 - F3/8 ELBOW
            18 - F1/2 ELBOW
            19 - Ball Joint
            20 - M1/4
            21 - M3/4
            22 - M1/8
            23 - M3/8
            24 - M5/8
            25 - M7/8
            26 - M5/16
            27 - M9/16
            28 - M11/16
            29 - M13/16
            30 - M9/32
            31 - M8
            32 - M9
            33 - M10
            34 - M11
            35 - M12
            36 - M13
            37 - M14
            38 - M15
            39 - M20
            40 - M22
            41 - M23
            42 - 3-way connecter
            43 - F-quick connective
            44 - M-quick connective
            45 - M-quick connective Plastic
    
    5th X - Code for fittings used
            01 - F1/2
            02 – F1/4
            03 - F3/4
            04 – F3/8
            05 - F5/8
            06 – F7/8
            07 – F7/8 Plastic Nut
            08 - F7/16
            09 – F9/16
            10 - F11/16
            11 - F15/16
            12 - F15/16 Plastic Nut
            13 - F1
            14 - F15
            15 - F16
            16 - F18
            17 - F3/8 ELBOW
            18 - F1/2 ELBOW
            19 - Ball Joint
            20 - M1/4
            21 - M3/4
            22 - M1/8
            23 - M3/8
            24 - M5/8
            25 - M7/8
            26 - M5/16
            27 - M9/16
            28 - M11/16
            29 - M13/16
            30 - M9/32
            31 - M8
            32 - M9
            33 - M10
            34 - M11
            35 - M12
            36 - M13
            37 - M14
            38 - M15
            39 - M20
            40 - M22
            41 - M23
            42 - 3-way connecter
            43 - F-quick connective
            44 - M-quick connective
            45 - M-quick connective Plastic
    
    6th X - Code for DN
            0 - DN8
    
    7th X - Code for Package
[3] 138-X-X-X-X-X-X-X
    
    1st & 2nd X - Length (3.9 – 80inch)
    
    3rd X - Code for the Finish
            01 - Natural
            02 - Grey
            04 - Black
            14 - CP
            16 - BN
            25 - Nickel
            26 - SUS
            36 - Red
            37 - Blue
    
    4th and 5th X - Codes for fittings used
                    01 - F1/2
                    02 – F1/4
                    03 - F3/4
                    04 – F3/8
                    05 - F5/8
                    06 – F7/8 
                    07 – F7/8 Plastic Nut
                    08 - F7/16
                    09 – F9/16
                    10 - F11/16
                    11 - F15/16
                    12 - F15/16 Plastic Nut
                    13 - F1
                    14 - F15
                    15 - F16
                    16 - F18
                    17 - F3/8 ELBOW
                    18 - F1/2 ELBOW
                    19 - Ball Joint
                    20 - M1/4
                    21 - M3/4
                    22 - M1/8
                    23 - M3/8
                    24 - M5/8
                    25 - M7/8
                    26 - M5/16
                    27 - M9/16
                    28 - M11/16
                    29 - M13/16
                    30 - M9/32
                    31 - M8
                    32 - M9
                    33 - M10
                    34 - M11
                    35 - M12
                    36 - M13
                    37 - M14
                    38 - M15
                    39 - M20
                    40 - M22
                    41 - M23
                    42 - 3-way connecter
                    43 - F-quick connective
                    44 - M-quick connective
                    45 - M-quick connective Plastic
    
    6th X - Code for DN
            0 - DN8
            1 - DN6
    
    7th X - Code for Package
[4] 13X- X-X -X -X -X-01, Flexible hose / water connectors hose , Size:DN8,
    Note:
    1st X – Code for hose end use
            1 – Faucet Hose 
            2 – Drinking machine hose
            3 – Toilet supply line
            4 – Bason supply line
            5 – Shower hose
            6 – Ice maker supply line
            0 – Other
    2nd & 3rd X - Length (6 - 72 inches)
    4th X - Code for the Finish
            02 - Grey
            04 - Black
            26 - SUS
            36 - Red
            37 - Blue
    5th X - Code for fittings used
            01 - F1/2
            02 - F3/8
            03 - F3/4
            04 - F9/16(F3/8in.Comp)
            05 - F5/8
            06 - F15/16
            07 - F15/16 Plastic Nut
            08 - F7/8
            09 - F7/8 Plastic Nut
            10 - F1/2 ELBOW
            11 - F3/8 ELBOW
            12 - F1/4
            13 - F11/16
            14 - F7/16
            15 - F9/16
            16 - F1
            17 - M1/2
            18 - M3/8
            19 - M3/4
            20 - M9/16
            21 - M5/8
            22 - M5/16
            23 - M11/16
            24 - M13/16
            25 - M8
            26 - M9
            28 - M12
            29 - M15
            30 - M16
            31 - M23
            32 - M1/4
            33 - M1/8
            34 - M1
            35 - Quick Connective
            36 - Quick Connective Plastic
            37 - Ball Joint
    6th X - Code for fittings used
            01 - F1/2
            02 - F3/8
            03 - F3/4
            04 - F9/16(F3/8in.Comp)
            05 - F5/8
            06 - F15/16
            07 - F15/16 Plastic Nut 
            08 - F7/8
            09 - F7/8 Plastic Nut
            10 - F1/2 ELBOW
            11 - F3/8 ELBOW
            12 - F1/4
            13 - F11/16
            14 - F7/16
            15 - F9/16
            16 - F1
            17 - M1/2
            18 - M3/8
            19 - M3/4
            20 - M9/16
            21 - M5/8
            22 - M5/16
            23 - M11/16
            24 - M13/16
            25 - M8
            26 - M9
            27 - M10
            28 - M12
            29 - M15
            30 - M16
            31 - M23
            32 - M1/4
            33 - M1/8
            34 - M1
            35 - Quick Connective
            36 - Quick Connective Plastic
            37 - Ball Joint
[5] 14X- X-X -X-X-X -X-X-01, PVC Spiral hose , Size:DN8, F1/2 x F1/2
    Note :
    1st X - Code for hose end use
            1 – Shower Hose
            2 – Drinking machine hose
            3 – Toilet supply line
            4 – Bason supply line
            5 – Faucet hose
            6 – Ice maker supply line
            0 – Other
    2nd & 3rd X - length (20 - 72 inches)
    4th X - Hose color/description
            01 - chrome/black Concavo-convex hose
            02 - PB/black Concavo-convex hose
            03 - chrome/white Concavo-convex hose
            04 - PB/white Concavo-convex hose
            05 - white/white Concavo-convex hose
            06 - satin/nickel Concavo-convex hose
            07 - chrome/clear Concavo-convex hose
            08 - ORB Concavo-convex hose
            09 - white Reticulated hose
            10 - white/white Reticulated hose
            11 - deep gray Reticulated hose
            12 - silver gray Reticulated hose
            13 - black Reticulated hose
            14 - gold silver Reticulated hose
            15 - brown silver Reticulated hose
            16 - CP silver Reticulated hose
            17 - BNP silver Reticulated hose
            18 - chrome/black Silver hose
            19 - PB/black Silver hose
            20 - chrome/white Silver hose
            21 - PB/white Silver hose
            22 - chrome/clear Silver hose
            23 - PB/clear Silver hose
            24 - chrome/gray Silver hose
    5th X - Code for inlet
            1 - F1/2 Brass R-crossline nut
            2 - F1/2 ABS R-crossline nut
            3 - F1/2 Brass R-crossline nut (O-ring)
            4 - F1/2 Brass R-hexagon nut
            5 - F1/2 Brass knurlling nut
            6 - F1/2 Brass knurling nut (trapeziform)
            7 - F1/2 Brass straight-knurling nut
            8 - F1/2 Brass hexagon nut
            9 - M15 Brass nut
            0 - M9/16 Brass nut
    6th X - Code for outlet
            1 - F1/2 Brass R-crossline nut
            2 - F1/2 ABS R-crossline nut
            3 - F1/2 Brass R-crossline nut (O-ring)
            4 - F1/2 Brass swivel R-crossline nut
            5 - F1/2 Brass swivel R-crossline nut (O-ring)
            6 - F1/2 Brass knurling R-crossline nut 
            7 - F1/2 Brass knurling swivel R-crossline nut
    7th X - Code for the nut finish
            1 - Polish
            2 - Chrome Plating
            3 - PB
            4 - BNP
            5 - PVD
            6 - Black
            7 - White
            8 - Red-bronze
    8th X - Nipple material
            0 - Brass
            1 - POM
            2 - Stainless Steel
[6] 15X- X-X -X-X-X-01, PVC hose / Water Connector Hose
    Note :
    1st X - Code for hose end use
            1 – Faucet Hose
            2 – Drinking machine hose
            3 – Toilet supply line
            4 – Bason supply line
            5 – Shower hose
            6 – Ice maker supply line
            0 – Other
    2nd & 3rd X - Length (6 - 72 inches)
    4th X - Code for the Finish
            02 - Grey
            03 - Natural
            04 - Black
            05 - White
    5th X - Code for fittings used
            01 - F1/2
            02 - F3/8
            03 - F3/4
            04 - F9/16(F3/8in.Comp)
            05 - F5/8
            06 - F15/16
            07 - F15/16 Plastic Nut
            08 - F7/8
            09 - F7/8 Plastic Nut
            10 - F1/2 ELBOW
            11 - F3/8 ELBOW
            12 - F1/4
            13 - F11/16
            14 - F7/16
            15 - F9/16
            16 - F1
            17 - M1/2
            18 - M3/8
            19 - M3/4
            20 - M9/16
            21 - M5/8
            22 - M5/16
            23 - M11/16
[7] 15X- X-X -X-X-X-01, PVC hose / Water Connector Hose
    Note:
    5th X - Code for fittings used
    24 - M13/16
    25 - M8
    26 - M9
    27 – M10
    28 - M12
    29 - M15
    30 - M16
    31 - M23
    32 - M1/4
    3

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per
    Section 9.5.1.1 of NSF/ANSI/CAN 61.

[1] Certified for a maximum surface area to volume ratio of 2.0 square inches/L.

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[3] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 9 sq. in./L.
[4] Product may be coated with Art-Coat Treatment
[5] Certified for a maximum surface area to volume ratio of 30.0 sq. in./L.
[6] Certified for a maximum surface area to volume ratio of 14 sq. in./L. 

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 square inches/L.
[2] Certified for a maximum surface area to volume ratio of 2.0 square inches/L.

[1] The carbon source is coal, wood and/or coconut.
[2] Trade names may include letters and/or numbers to designate any or all of the following:
    mesh size, customer, market, processing methods, intended applications, activity level,
    special testing, or other customer or product specific differentiators.
[3] Certified for the following mesh sizes: 8x16, 8x20, 8x30, 10x20, 12x40, 20x40, 20x50,
    30x60, 30x200, 80x325.

[1] The carbon source is coal, wood and/or coconut.
[2] Trade names may include letters and/or numbers to designate any or all of the following:
    mesh size, customer, market, processing methods, intended applications, activity level,
    special testing, or other customer or product specific differentiators.
[3] Certified for the following mesh sizes: >4, 4 x 8, 8 x 16, 8 x 20, 8 x 30, 10 x 20, 12 x
    40, 20 x 40, 20 x 50, 30 x 60, 30 x 200, 80 x 325.

[1] The carbon source is coal, wood, and/or coconut.
[2] Trade names may include letters and/or numbers to designate any or all of the following:
    mesh size, customer, market, processing methods, intended applications, activity level,
    special testing, or other customer or product specific differentiators.
[3] Certified for the following mesh sizes: 3x24, 4x10, 4x14, 8x16, 8x20, 8x30, 10x20,
    12x30, 12x40, 20x40, 20x50, 30x60, 30x200, 80x325.

[1] The carbon source is coal, wood and/or coconut.
[2] Trade names may include letters and/or numbers to designate any or all of the following:
    mesh size, customer, market, processing methods, intended applications, activity level,
    special testing, or other customer or product specific differentiators.
[3] Certified for the following mesh sizes: >4, 3x24, 4x8, 4x10, 4x14, 8x16, 8x20, 8x30,
    10x20, 12x30, 12x40, 20x40, 20x50, 30x60, 30x200, 80x325.

[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.

[1] Certification includes metric equivalent sizes of 40 - 350 mm.

[1] 1/8" x 1/8" x 1/8" - 6" x 6" x 4"
[2] 1 1/4" x 1 1/4" x 1" - 12" x 12" x 10"
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] The configuration range for both models is 1/8" x 3/4" - 6" x 12".
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] The configuration range is 1/8-6" diameter by 3/4-75" length
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for stainless steel tube and process connection only.
    
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.2 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Colors: Green, red
    Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 14
    Final Cure Time and Temperature: 60 seconds at 462°F
    Special Comments: Preheat pipe to 464°F before powder application.
[2] Colors: Black
    Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 60
    Final Cure Time and Temperature: 3 - 10 minutes at 438 - 475°F
    Special Comments: Preheat substrate to 400 - 500°F
[3] Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 14 
    Maximum Thinner: None
    Final Cure Time and Temperature: 120 seconds at 226°C (438°F), 80 seconds at 232°C
    (450°F), or 60 seconds at 239°C (463°F)
    Special Comments: Preheat substrate to 239°C (463°F) before powder application.
[4] Colors: Green
    Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 20
    Maximum Thinner: None
    Final Cure Time and Temperature: 20 minutes at 200°C or 13 minutes at 220°C
    Special Comments: Preheat substrate to 425°F - 463°C before powder application.

[1] Colors: Green, red
    Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 14
    Final Cure Time and Temperature: 60 seconds at 462°F
    Special Comments: Preheat pipe to 464°F before powder application.
[2] Colors: Black
    Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 60
    Final Cure Time and Temperature: 3 - 10 minutes at 438 - 475°F
    Special Comments: Preheat substrate to 400 - 500°F
[3] Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 14 
    Maximum Thinner: None
    Final Cure Time and Temperature: 120 seconds at 226°C (438°F), 80 seconds at 232°C
    (450°F), or 60 seconds at 239°C (463°F)
    Special Comments: Preheat substrate to 239°C (463°F) before powder application.
[4] Colors: Green
    Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 20
    Maximum Thinner: None
    Final Cure Time and Temperature: 20 minutes at 200°C or 13 minutes at 220°C
    Special Comments: Preheat substrate to 425°F - 463°C before powder application.
[6] Colors: Tan, White
    Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 10
    Final Cure Time: 10 minutes at 400°F
    Special Comments: Preheat part to 462°F before powder application.

[2] Colors: Black
    Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 60
    Final Cure Time and Temperature: 3 - 10 minutes at 438 - 475°F
    Special Comments: Preheat substrate to 400 - 500°F

[1] Colors: Green, red
    Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 14
    Final Cure Time and Temperature: 60 seconds at 462°F
    Special Comments: Preheat pipe to 464°F before powder application.
[2] Colors: Black
    Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 60
    Final Cure Time and Temperature: 3 - 10 minutes at 438 - 475°F
    Special Comments: Preheat substrate to 400 - 500°F
[4] Colors: Green
    Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 20
    Maximum Thinner: None
    Final Cure Time and Temperature: 20 minutes at 200°C or 13 minutes at 220°C
    Special Comments: Preheat substrate to 425°F - 463°C before powder application.
[6] Colors: Tan, White
    Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 10
    Final Cure Time: 10 minutes at 400°F
    Special Comments: Preheat part to 462°F before powder application.

[1] Colors: Green, red
    Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 14
    Final Cure Time and Temperature: 60 seconds at 462°F
    Special Comments: Preheat pipe to 464°F before powder application.
[2] Colors: Black
    Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 60
    Final Cure Time and Temperature: 3 - 10 minutes at 438 - 475°F
    Special Comments: Preheat substrate to 400 - 500°F
[3] Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 14 
    Maximum Thinner: None
    Final Cure Time and Temperature: 120 seconds at 226°C (438°F), 80 seconds at 232°C
    (450°F), or 60 seconds at 239°C (463°F)
    Special Comments: Preheat substrate to 239°C (463°F) before powder application.
[4] Colors: Green
    Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 20
    Maximum Thinner: None
    Final Cure Time and Temperature: 20 minutes at 200°C or 13 minutes at 220°C
    Special Comments: Preheat substrate to 425°F - 463°C before powder application.
[7] Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 30
    Final Cure Time and Temperature: Post-heat temperature and minimum cure times: 300°F for
    15 minutes, 325°F for 9 minutes, 350° for 7 minutes, 375° for 6 minutes, 400°F for 5
    minutes
    Special Comments: Preheat substrate to a minimum of 275°F

[1] Certified for tanks 30,000 gallons and greater.

[1] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.

[1] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.2 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 2.0 square inches per liter.
[3] This product is also evaluated for use in Mechanical Plumbing Device applications with a
    maximum use restriction of 1.1 square inches/L.
[5] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.1 sq. in./L.
[6] Certified for a maximum surface area to volume ratio of 1 square inches/L.
[8] Certified for a maximum surface area to volume ratio of 1.6 sq. in./L.
[9] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.15 square inches/L.
[10] Certified for a maximum surface area to volume ratio of 1.5 square inches/L.

[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.

[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.

[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.

[1] Certified for a minimum flow of 16,353 L/day.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.

[1] Certified for a maximum surface area to volume ratio of 3.0 square inches/L.
[2] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 3.0 square inches/L.

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[3] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 1.1 sq. in./L.
    
[4] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 1.5 sq. in./L.
[5] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 1.7 sq. in./L.

[1] Certified for a maximum surface area to volume ratio of 6.0 sq.in./L.
[2] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 sq.in./L.
[3] Certified for a maximum surface area to volume ratio of 2.0 sq.in./L.

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[3] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 1.5 sq. in./L.
[4] his product has also been evaluated with the use of a lubricant, Mountfit SAGB 4025.
[5] Certified for a maximum surface area to volume ratio of 6.0 square inches/L.

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 1.5 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 1.1 sq. in./L.
[3] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2 sq. in./L.
[4] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.

[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[3] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.1 sq. in./L.

[1] Certified for a flow of 0.5 gallons per minute per square foot and greater.
[2] Certified for a maximum size of 41" x 36" x 16' (height x width x length).

[1] This product has also been evaluated for use in Mechanical Plumbing Device application
    with a maximum use restriction of 2.0 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.

[1] Certification does not include lubricants or sealants.
    HYDROTITE-CJ-0720-2K-AD-EX, HYDROTITE-CJ-0725-3K-AD-EX, HYDROTITE-CJ-1020-2K-AD-EX,
    HYDROTITE-CJ-0720-2K-AD-SIKAEX, HYDROTITE-CJ-0725-3K-AD-SIKAEX,
    HYDROTITE-CJ-1020-2K-AD-SIKAEX include adhesive on one side.
[2] Certified for a maximum surface area to volume ratio of 0.06 sq. in./L.

[1] A - Material Thickness
[2] Certified for a maximum surface area to volume ratio of 1.1 square inches/L.
[3] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.2 square inches/L.
[4] Certified for a maximum surface area to volume ratio of 2.0 square inches/L.

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.1 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[3] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 sq. in./L.

[2] The carbon source is coconut shell or coal.
[3] Certified for the following mesh sizes: 3 x 6, 4 x 6, 4 x 8, 4 x 10, 6 x 10, 6 x 12, 6 x
    16, 8 x 14, 8 x 16, 8 x 20, 8 x 30, 8 x 40, 10 x 20, 10 x 30, 10 x 40, 12 x 20, 12 x 30,
    12 x 40, 20 x 50 and 50 x 200.

[4] The carbon source is coal or coconut shell.
[10] Certified for the following mesh sizes: 3 x 6, 4 x 6, 4 x 8, 4 x 10, 6 x 10, 6 x 12, 6 x
     16, 8 x 14, 8 x 16, 8 x 20, 8 x 30, 8 x 40, 10 x 20, 10 x 30, 10 x 40, 12 x 20, 12 x 30,
     12 x 40, 20 x 50, and 50 x 200.

[1] The carbon source is bituminous coal.
[2] Certified for the following mesh sizes: 8 x 16, 8 x 20, 8 x 30, 12 x 30, 12 x 40, and
    20 x 50.

[1] The carbon source is coconut charcoal.
[2] Certified for the following mesh sizes: 4x10, 6x12, 6x14, 6x16, 8x14, 8x16, 8x30, 12x40,
    14x30, and 20x50.
[3] The carbon source is coal.
[4] Certified for the following mesh sizes: 8x30 and 12x40.
[5] Certified for the following mesh sizes: -100, -150, -200, and -325.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[Q] This product meets the reduced Q test statistic criteria of 1 µg for lead per Section
    9.5.1.1 of NSF/ANSI/CAN 61.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[2] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 square inches/L.
[3] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.9 square inches/L.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for a maximum surface area to volume ratio of 0.5 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 1.5 sq. in./L.
[3] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.1 sq. in./L.

[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] This product is Certified for a maximum use level of 750 mg/L.
[2] The carbon source is wood chips or wood char for product trade names except for Clarimex
    046V, Clarimex 046 V6, Clarimex 046 V6 H, Clarimex 046V8.
[3] The carbon source is bituminous coal.
[4] The carbon source is wood char for Clarimex 046V, Clarimex 046 V6, Clarimex 046 V6 H,
    and Clarimex 046V8.
[5] The carbon source is wood char for Clarimex 046V, Clarimex 046 V6, Clarimex 046 V6 H,
    and Clarimex 046V8.

[1] This product is Certified for a maximum use level of 750 mg/L.
[3] The carbon source is bituminous coal.
[6] The carbon source is bituminous coal for the following product trade names: AQUACTIV
    12X40, AQUACTIV 8X30, Clarimex CAGRB 12X40, Clarimex CAGRB 4X10 and Clarimex CAGRB 8X30.
[7] For the product trade name, CARBOACTIV (without a suffix), Certified for the following
    mesh sizes: 4 x 10, 6 x 10, 8 x 30, 12 x 25, 12 x 40, and 20 x 50.
[8] xxx - represents all sizes and gradations from 3 mesh to 70 mesh (212 um to 6.3mm).
[9] The carbon source is lignite coal for Clarimex CAGR.
[10] Carbon source is coconut char.
[11] The carbon source is wood chips for the following product trade names: Clarimex VG xxx,
     Clarimex VG xxx LF.

[1] The carbon source is coal.

[1] The carbon source is coal.

[6] Certification includes Bypass Elbows for valves 14" and greater.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] The carbon source is coal.

[1] The carbon source is coconut shell.
[2] Certified for mesh sizes: 3 x 6, 4 x 6, 4 x 8, 4 x 10, 6 x 10, 6 x 12, 6 x 16, 8 x 14, 8
    x 16, 8 x 20, 8 x 30, 8 x 40, 10 x 20, 10 x 30, 10 x 40, 12 x 20, 12 x 30, 12 x 40, 18 x
    35, 18 x 40, 18 x 50, 20 x 40, 20 x 50, 30 x 60, 30 x 70, 40 x 80, 50 x 150, 50 x 200,
    80 x 200, 80 x 325.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for a minimum daily flow rate of 816,000 Liters/day.
[2] Certification does not include media.
[3] Certified for a minimum daily flow rate of 648,000 Liters/day.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Certified for a maximum surface area to volume ratio of 2.0 square inches/L.

[2] The "xx" in the trade name is used as an ordering code for each pressure connector
    variant.
    Certified for the following pressure connectors: 
    1/2-14 NPT, ANSI/ASME B1.20.1
    G 1/4A - EN837
    G1/2 - EN837
    G 1/2- EN837- AISI 316L
    1/8-27 NPT, ANSI/ASME B1.20.1
    1/4-18 NPT - AISI 316L
    1/4-18 NPT, ANSI/ASME B1.20.1
    R 1/4 ISO 7-1
    7/16-20 UNF-2B
    1/8-27 NPTF
    1/4-18 NPTF
    1/4-18 NPT-4mm inlet hole
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] The 'xx' in the trade name is used as an ordering code for each pressure connector
    variant.
    
    Certified for the following pressure connectors:
    1/2-14 NPT, ANSI/ASME B1.20.1
    G1/2 - EN837
    1/8-27 NPT, ANSI/ASME B1.20.1
    1/4-18 NPT, ANSI/ASME B1.20.1
    R 1/4 ISO 7-1
    7/16-20 UNF-2B
    1/8-27 NPTF
    1/4-18 NPTF
    1/4-18 NPT-4mm inlet hole
    G 1/4A - EN837
    1/4-18 NPT - AISI 316L
    G1/2 - EN837 - AISI 316L
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] The carbon source is coal.

[1] The carbon source is coal.
[2] Certified mesh sizes: any combination of A×B, where A=3-30 mesh and B=6-60 mesh.

[1] The carbon source is coal.
[2] Certified for the following mesh sizes: any combination of A x B, where A = 3 - 30 mesh
    and B = 6 - 60 mesh.

[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L
[2] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 sq. in./L.
[3] Certified for a maximum suface area to volume ratio of 20 sq. in./L.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.5 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 2.5 square inches/L.
[3] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[4] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 sq. in./L.