NSF Product and Service Listings

These NSF Official Listings are current as of Monday, May 25, 2020 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?



NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings.


 
3M / Electrical Markets Division 
3M Center, Building 201-2C-11
St. Paul, MN 55144 
United States 
651-736-9030
Visit this company's website


Facility : Angleton, TX

Protective (Barrier) Materials

    Water Water
  Water Contact Contact Contact
Trade Designation Size Restriction Temp Material

Coatings - Fittings
3M Scotchkote Fusion Bonded Epoxy Coating 6233W 11G[1] >= 1/2" D. HOT PEC
3M Scotchkote Fusion Bonded Epoxy Coating 6233W 4G[1] >= 1/2" D. HOT PEC
3M Scotchkote Fusion Bonded Epoxy Coating 6233W 8G[1] >= 1/2" D. HOT PEC
Scotchkote 206N[2] >= 4" D. HOT PEC
Scotchkote 206N Extra LG[2] >= 4" D. HOT PEC
Scotchkote 206N Fluid Bed[2] >= 4" D. HOT PEC
Scotchkote 206N Long Gel[2] >= 4" D. HOT PEC

[1] Colors: Dark Green
    Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 50
    Maximum thinner: None
    Final Cure Time and Temperature: 6233W 4G: 30-45 seconds at 450°F; 6233W 8G: 60-90
    seconds at 450°F; 6233W 11G: 90-120 seconds at 450°F
    Special Comments: Preheat part to 425° - 488° F before application of powder.
[2] Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 60
    Final Cure Time and Temperature: 206N: 10 minutes at 400°F; 206N Extra LG: 16 minutes at
    400°F; 206N Fluid Bed: 10 minutes at 400°F; 206N Long Gel: 10 minutes at 400°F

Coatings - Pipe
3M Scotchkote Fusion Bonded Epoxy Coating 6233W 11G[1] >= 1/2" D. HOT PEC
3M Scotchkote Fusion Bonded Epoxy Coating 6233W 4G[1] >= 1/2" D. HOT PEC
3M Scotchkote Fusion Bonded Epoxy Coating 6233W 8G[1] >= 1/2" D. HOT PEC
Scotchkote 206N[2] >= 4" D. HOT PEC
Scotchkote 206N Extra LG[2] >= 4" D. HOT PEC
Scotchkote 206N Fluid Bed[2] >= 4" D. HOT PEC
Scotchkote 206N Long Gel[2] >= 4" D. HOT PEC

[1] Colors: Dark Green
    Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 50
    Maximum thinner: None
    Final Cure Time and Temperature: 6233W 4G: 30-45 seconds at 450°F; 6233W 8G: 60-90
    seconds at 450°F; 6233W 11G: 90-120 seconds at 450°F
    Special Comments: Preheat part to 425° - 488° F before application of powder.
[2] Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 60
    Final Cure Time and Temperature: 206N: 10 minutes at 400°F; 206N Extra LG: 16 minutes at
    400°F; 206N Fluid Bed: 10 minutes at 400°F; 206N Long Gel: 10 minutes at 400°F

Coatings - Pump
Scotchkote 206N[2] [3] >= 2" D. HOT PEC
Scotchkote 206N Extra LG[2] [3] >= 2" D. HOT PEC
Scotchkote 206N Fluid Bed[2] [3] >= 2" D. HOT PEC
Scotchkote 206N Long Gel[2] [3] >= 2" D. HOT PEC

[2] Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 60
    Final Cure Time and Temperature: 206N: 10 minutes at 400°F; 206N Extra LG: 16 minutes at
    400°F; 206N Fluid Bed: 10 minutes at 400°F; 206N Long Gel: 10 minutes at 400°F
[3] Certified for a maximum surface area to volume ratio of 122.1 sq. in./L. for pump end
    use.

Coatings - Tank
Scotchkote 206N[2] >= 5 gal. D. HOT PEC
Scotchkote 206N Extra LG[2] >= 5 gal. D. HOT PEC
Scotchkote 206N Fluid Bed[2] >= 5 gal. D. HOT PEC
Scotchkote 206N Long Gel[2] >= 5 gal. D. HOT PEC

[2] Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 60
    Final Cure Time and Temperature: 206N: 10 minutes at 400°F; 206N Extra LG: 16 minutes at
    400°F; 206N Fluid Bed: 10 minutes at 400°F; 206N Long Gel: 10 minutes at 400°F

Coatings - Valve
3M Scotchkote Fusion Bonded Epoxy Coating 6233W 11G[1] >= 1/2" D. HOT PEC
3M Scotchkote Fusion Bonded Epoxy Coating 6233W 4G[1] >= 1/2" D. HOT PEC
3M Scotchkote Fusion Bonded Epoxy Coating 6233W 8G[1] >= 1/2" D. HOT PEC
Scotchkote 206N[2] >= 2" D. HOT PEC
Scotchkote 206N Extra LG[2] >= 2" D. HOT PEC
Scotchkote 206N Fluid Bed[2] >= 2" D. HOT PEC
Scotchkote 206N Long Gel[2] >= 2" D. HOT PEC

[1] Colors: Dark Green
    Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 50
    Maximum thinner: None
    Final Cure Time and Temperature: 6233W 4G: 30-45 seconds at 450°F; 6233W 8G: 60-90
    seconds at 450°F; 6233W 11G: 90-120 seconds at 450°F
    Special Comments: Preheat part to 425° - 488° F before application of powder.
[2] Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 60
    Final Cure Time and Temperature: 206N: 10 minutes at 400°F; 206N Extra LG: 16 minutes at
    400°F; 206N Fluid Bed: 10 minutes at 400°F; 206N Long Gel: 10 minutes at 400°F



Facility : Morden, Manitoba, Canada

Protective (Barrier) Materials

    Water Water
  Water Contact Contact Contact
Trade Designation Size Restriction Temp Material

Coatings - Fittings
ScotchKote 134[1] >= 1/2"[2] D. HOT PEC

[1] Number of Coats: 1
    Sequence of Coats: N/A
    Maximum Field Use Dry Film Thickness (in mils): 60
    Maximum Thinner: None
    Final Cure Time and Temperature: 25 minutes at 425° F
[2] Certified for a maximum surface area to volume ratio of 122.1 sq. in./L. for pump end
    use.

Coatings - Pipe
ScotchKote 134[1] >= 1/2"[2] D. HOT PEC

[1] Number of Coats: 1
    Sequence of Coats: N/A
    Maximum Field Use Dry Film Thickness (in mils): 60
    Maximum Thinner: None
    Final Cure Time and Temperature: 25 minutes at 425° F
[2] Certified for a maximum surface area to volume ratio of 122.1 sq. in./L. for pump end
    use.

Coatings - Pump
ScotchKote 134[1] [2] D. HOT PEC

[1] Number of Coats: 1
    Sequence of Coats: N/A
    Maximum Field Use Dry Film Thickness (in mils): 60
    Maximum Thinner: None
    Final Cure Time and Temperature: 25 minutes at 425° F
[2] Certified for a maximum surface area to volume ratio of 122.1 sq. in./L. for pump end
    use.

Coatings - Tank
ScotchKote 134[1] >= 5 gal. D. HOT PEC

[1] Number of Coats: 1
    Sequence of Coats: N/A
    Maximum Field Use Dry Film Thickness (in mils): 60
    Maximum Thinner: None
    Final Cure Time and Temperature: 25 minutes at 425° F

Coatings - Valve
ScotchKote 134[1] >= 1/2"[2] D. HOT PEC

[1] Number of Coats: 1
    Sequence of Coats: N/A
    Maximum Field Use Dry Film Thickness (in mils): 60
    Maximum Thinner: None
    Final Cure Time and Temperature: 25 minutes at 425° F
[2] Certified for a maximum surface area to volume ratio of 122.1 sq. in./L. for pump end
    use.



 
3R Valve, LLC 
29299 Madison Road
Echo, OR 97826 
United States 
541-376-8107
Visit this company's website


Facility : Echo, OR

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves [G]
ASR (Aquifer Storage and Recovery) Valve[1] 5" - 14" CLD 23 MLTPL

[1] Certified for a minimum flow of 250 gallons per day.
    Not intended for residential use.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



5Elem Hi-Tech Corporation 
No. 986, Machang Road
Economic Development Zone 
Jiangyan, Jiangsu 225500 
China 
86 523 8881 5055 
Visit this company's website


Facility : Jiangsu, China

Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Pipe
Aquaflow 3/4" - 12" CLD 23 PUR



 
7.30 Inc. 
68 Continental Court B9
P.O. Box 2098 
Breckenridge, CO 80424 
United States 
970-453-6176


Facility : # 1 USA

Protective (Barrier) Materials

    Water Water
  Water Contact Contact Contact
Trade Designation Size Restriction Temp Material

Pipe Liner - Immediate Return to Service[1]
Western Pipeway Tape >= 3" CLD 23 PE

[1] Certification does not include the cement grout used to secure the liner to the pipe.
    Certified for the polyethylene liner only.
    Flush with water for 3-5 gallons per minute for 1 hour required before placing lined
    pipes back into service.



 
7507852 Canada Inc. DBA Next Polymers 
340 Churchill Road
Prescott, ON K0E 1T0 
Canada 
613-925-4281
Visit this company's website


Facility : Prescott, Ontario, Canada

Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Pipe Only
Aqualoc[1] >= 1/2" CLD 23 PVC
Rehau Proloc[2] >= 1/2" CLD 23 PVC

[1] Certified for the following colors: blue, gray, and white.
[2] Certified for the following colors: gray and white



 
A Touch of Brass 
13832 Magnolia Avenue
Chino, CA 91710 
United States 
909-464-1000
Visit this company's website


Facility : Chino, CA

Mechanical Plumbing Devices

Trade Designation      

Commercial Faucets[1] [G]
01280      
01281      
01282      
01283      

[1] Suffix - xx indicates finish.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Faucets[1] [G]
02017      
02121      
02122      
02356      
05253      

[1] Suffix - xx indicates finish.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Faucet Hose and Spray Assembly[1] [G]
02124      
02801      
02854      

[1] Suffix - xx indicates finish.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
A-S America Inc. (American Standard Brands) 
1 Centennial Avenue
Piscataway, NJ 08854 
United States 
732-369-4061


Facility : # 1 Italy

Mechanical Plumbing Devices

Trade Designation      

Faucets[G]

Single Lever Basin Mixer
D35109.100.100      
D35109.100.144      
D35109.100.243      
D35109.10C.100[1]      
D35109.10C.144[1]      
D35109.10C.243[1]      
D35109.150.100      
D35109.150.144      
D35109.150.243      
D35109.151.100[1]      
D35109.151.144[1]      
D35109.151.243[1]      
D35109.152.100[1]      
D35109.152.144[1]      
D35109.152.243[1]      
D35109.15C.100[1]      
D35109.15C.144[1]      
D35109.15C.243[1]      

[1] Flow rate of 1.2 gpm.

Single Lever Sink Mixer
D35409.000.100      
D35409.000.355      

Single Lever Sink Mixer with Pull-Out Shower
D35409.300.100      
D35409.300.355      

Wall Mounted Basin Mixer
D35109.400.100      
D35109.400.144      
D35109.400.243      

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
A. O. Smith Enterprises Ltd. 
768 Erie Street
P.O. Box 310 
Stratford, ON N5A 6T3 
Canada 
519-271-5800


Facility : Stratford, Ontario, Canada

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Pressurized Water Storage Tanks[1] [G]
A O Smith ProMax (PM Prefix) 14 - 119 gal. CLD 23 MLTPL
Altamira Pro X/XL 20 - 119 gal. CLD 23 MLTPL
American Water Heater (APT Prefix) 14 - 119 gal. CLD 23 MLTPL
Driller Services (DST/DSI Prefix) >= 65 gal. CLD 23 MLTPL
Global Pump (GPE Prefix) >= 85 gal. CLD 23 MLTPL
Gould Pumps Hydro Pro Water Systems Tanks (V Prefix and MP or PST Suffix) 14 - 20 gal. CLD 23 MLTPL
Gould Pumps Hydro Pro Water Systems Tanks (V Prefix) 14 - 119 gal. CLD 23 MLTPL
PermaTank (SBD/SBDT Prefix) >= 86 gal. CLD 23 MLTPL
Pump Pro (PP Prefix and MP or PST Suffix) 14 - 20 gal. CLD 23 MLTPL
Pump Pro (PP Prefix) >= 14 gal. CLD 23 MLTPL
Trident (TD Prefix and MP or PST Suffix) 14 - 20 gal. CLD 23 MLTPL
Trident Ultra (TDU Prefix and MP or PST Suffix ) >= 14 gal. CLD 23 MLTPL
Trident Ultra (TDU and TD Prefix) >= 14 gal. CLD 23 MLTPL
Xylem CentriPro T Water Sytem Tanks 14 - 119 gal. CLD 23 MLTPL
Xylem CentriPro TP Water Systems Tanks 14 - 119 gal. CLD 23 MLTPL
Xylem Hydro Pro Water System Tanks (V Prefix) 14 - 119 gal. CLD 23 MLTPL
Xylem Hydro Pro Water System Tanks (V prefix and MP or PST suffix) 14 - 20 gal. CLD 23 MLTPL

[1] Product also complies with NSF/ANSI 372.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Thermal Expansion Tanks[1] [G]
Bell and Gossett (Prefix PT)[2] 14 - 86 gal. D. HOT MLTPL

[1] Product also complies with NSF/ANSI 372.
[2] Suffixes:
    blank 
    B   - Buried 
    EX  - Base extension 
    MP  - Mounted pump 
    P   - Pipe mounted 
    PST - Pump system tank
    S
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



A. Schulman, Inc. 
1183 Home Avenue
Akron, OH 44310 
United States 
Visit this company's website


Facility : Evansville, IN

Potable Water Materials

    Water Water
    Contact Contact
Trade Designation End Use Temp Material

Potable Water Materials
Aqualoy® 125B[1] A,F C. HOT RPP
Aqualoy® 125G[1] A,F C. HOT RPP
Aqualoy® 125M Black[1] A,F C. HOT RPP
Aqualoy® 125N[1] A,F C. HOT RPP
Aqualoy® 125W[1] A,F C. HOT RPP
Aqualoy® 125W14[1] A,F C. HOT RPP
Aqualoy® 140B[1] A,F C. HOT RPP
Aqualoy® 140N[1] A,F C. HOT RPP
Aqualoy® 140W[1] A,F C. HOT RPP
Aqualoy® 145N[1] A,F C. HOT RPP
E-10025N[1] A,F C. HOT RPP
E-10026B[1] A,F C. HOT RPP

[1] Certified for a maximum surface area to volume ratio of 250 sq. in./L.



Facility : Akron, OH

Potable Water Materials

    Water Water
    Contact Contact
Trade Designation End Use Temp Material

Potable Water Materials
Aqualoy® 645N A,F C. HOT NP



Facility : Guangdong, China

Potable Water Materials

    Water Water
    Contact Contact
Trade Designation End Use Temp Material

Potable Water Materials[1]
Aqualoy® 125B A,F C. HOT RPP
Aqualoy® 125N A,F C. HOT RPP
Aqualoy® 125W A,F C. HOT RPP
Aqualoy® 140N A,F C. HOT RPP
Aqualoy® 140W A,F C. HOT RPP

[1] Certified for a maximum surface area to volume ratio of 250 sq. in./L.



 
A. W. Chesterton Co. 
860 Salem Street
Groveland, MA 01834 
United States 
978-469-6446


Facility : Groveland, MA

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Miscellaneous Process Devices/Components[1]
150 Non-Split Cartridge Seal[G] [2] D. HOT MLTPL
155 Non-Split Cartridge Seal[G] [2] D. HOT MLTPL
1725A[3] [G] D. HOT PTFE
180 Non-Split Cartridge Seal[G] [2] D. HOT MLTPL
1810 Non-Split Cartridge Seal[G] [2] D. HOT MLTPL
442 Split Mechanical Seal[G] [2] D. HOT MLTPL
442C Split Mechanical Seal[G] [2] D. HOT MLTPL
S10 Non-Split Cartridge Seal[G] [2] D. HOT MLTPL
Single Non-Split Cartridge Seals[G] [2] D. HOT MLTPL

[1] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[2] Certified for mechanical seals for use with pump shafts ranging from 1" - 12" in
    diameter.  Certified for equivalent metric sizes.
[3] Certified for use as a packing material in pumps with shaft diameters >= 0.625".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Protective (Barrier) Materials

    Water Water
  Water Contact Contact Contact
Trade Designation Size Restriction Temp Material

Coatings - Fittings
ARC S1 PW BLU[1] >= 12" CLD 23 EPOXY
ARC S1 PW WH[2] >= 12" CLD 23 EPOXY

[1] Colors: Blue
    Number of coats: 3
    Maximum field use dry film thickness (in mils): 45 (15 mils/coat)
    Recoat cure time and temperature: 6 hours at 77°F
    Final cure time and temperature: 7 days at 77°F
    Special Comments: Mix ratio of Part A:B is 2:1 by volume
[2] Colors: White
    Number of coats: 3
    Maximum field use dry film thickness (in mils): 45 (15 mils/coat)
    Recoat cure time and temperature: 6 hours at 77°F
    Final cure time and temperature: 7 days at 77°F
    Special Comments: Mix ratio of Part A:B is 2:1 by volume

Coatings - Pump
ARC S1 PW BLU[1] >= 4" CLD 23 EPOXY
ARC S1 PW WH[2] >= 4" CLD 23 EPOXY

[1] Colors: Blue
    Number of coats: 3
    Maximum field use dry film thickness (in mils): 45 (15 mils/coat)
    Recoat cure time and temperature: 6 hours at 77°F
    Final cure time and temperature: 7 days at 77°F
    Special Comments: Mix ratio of Part A:B is 2:1 by volume
[2] Colors: White
    Number of coats: 3
    Maximum field use dry film thickness (in mils): 45 (15 mils/coat)
    Recoat cure time and temperature: 6 hours at 77°F
    Final cure time and temperature: 7 days at 77°F
    Special Comments: Mix ratio of Part A:B is 2:1 by volume

Coatings - Valve
ARC S1 PW BLU[1] >= 4" CLD 23 EPOXY
ARC S1 PW WH[2] >= 4" CLD 23 EPOXY

[1] Colors: Blue
    Number of coats: 3
    Maximum field use dry film thickness (in mils): 45 (15 mils/coat)
    Recoat cure time and temperature: 6 hours at 77°F
    Final cure time and temperature: 7 days at 77°F
    Special Comments: Mix ratio of Part A:B is 2:1 by volume
[2] Colors: White
    Number of coats: 3
    Maximum field use dry film thickness (in mils): 45 (15 mils/coat)
    Recoat cure time and temperature: 6 hours at 77°F
    Final cure time and temperature: 7 days at 77°F
    Special Comments: Mix ratio of Part A:B is 2:1 by volume



 
A. W. Chesterton Co. 
860 Salem Street
Groveland, MA 01834 
United States 
978-469-6446
Visit this company's website


Facility : # 1 USA

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Patching Materials
ARC 5ES [1] C. HOT EPOXY

[1] The exposed surface area of each sealant in a household distribution system
    should not exceed 1.3 sq. cm/L or .2 sq. in/L.



 
A.O. Smith Su Teknolojileri A.S. 
Ikitelli O.S.B.Mh.Marmara D Blok Sk.
No:2-3, Küçükçekmece-Ikitelli 
34303 Istanbul 
Turkey 
90 212 444 1646
Visit this company's website


Facility : # 3 China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Reverse Osmosis Element[1] [2] [3]
BW-4040 4" x 40" CLD 23 MLTPL
BW-8040 8" x 40" CLD 23 MLTPL
ULP-4021 4" x 21" CLD 23 MLTPL
ULP-4040 4" x 40" CLD 23 MLTPL
ULP-4040HR 4" x 40" CLD 23 MLTPL
ULP-4040MR 4" x 40" CLD 23 MLTPL
ULP-8040 8" x 40" CLD 23 MLTPL

[1] Size is expressed as Diameter x length.
[2] BW-8040 and ULP-8040 models are Certified for a minimum daily flow of 10000 gallons.
    BW-4040 model is Certified for a minimum daily flow of 2400 gallons.
    ULP-4040 model is Certified for a minimum daily flow of 2600 gallons.
    ULP-4040MR model is Certified for a minimum daily flow of 2200 gallons.
    ULP-4040HR model is Certified for a minimum daily flow of 1800 gallons.
    ULP-4021 model is Certified for a minimum daily flow of 950 gallons.
[3] Models require the following flushing procedure:
    BW-4040, ULP-4040, ULP-4040MR, ULP-4040HR and ULP-4021 require a 4 gpm flush for 24
    hours using tap water.
    BW-8040 and ULP-8040 require a 15 gpm flush for 24 hours using tap water.



 
A.R. Thomson Group 
3420 189th Street
Surrey, BC V32 1A7 
Canada 
604-507-6050
Visit this company's website


Facility : # 1 Canada

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Gasket/Sealing Materials
Thomson Multipac-6000 [1] C. HOT OTHER
Thomson Multipac-6000 [2] CLD 23 OTHER

[1] Certified for a maximum surface area to volume ratio of 0.3 sq. in./L when used at
    Commercial Hot (82°C) temperature.
[2] Certified for a maximum surface area to volume ratio of 0.8 sq. in./L when used at Cold
    (23°C) temperature.



 
A.R. Thomson Group 
3420 189th Street
Surrey, BC V3Z 1A7 
Canada 
604-507-6050
Visit this company's website


Facility : # 1 Canada

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Gasket/Sealing Materials
Thomson 4500 >= 3" CLD 23 EPDM
Thomson MultiPac 6000 [1] C. HOT OTHER
Thomson MultiPac 6000 [2] CLD 23 OTHER

[1] Certified for a maximum surface area to volume ratio of 0.3 sq. in./L when used at
    Commercial Hot (82°C) temperature.
[2] Certified for a maximum surface area to volume ratio of 0.8 sq. in./L when used at Cold
    (23°C) temperature.



 
A.T. Gomma Guarnizioni Industriali S.R.L. 
Via Mearolo, 3/D
24060 Foresto Sparso 
Italy 
39 035 930 254
Visit this company's website


Facility : Foresto Sparso, Italy

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Gasket/Sealing Materials[1] [G]
EX70LC (EPDM 70 PEROX) [2] C. HOT EPDM

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 square inches/L.
[2] Certified for a maximum surface area to volume ration of 2.0 square inches/L.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

O-Rings[1] [G]
EX70LC (EPDM 70 PEROX) [2] C. HOT EPDM

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 square inches/L.
[2] Certified for a maximum surface area to volume ration of 2.0 square inches/L.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
A.U.K. Müller GmbH & Co. KG 
Dresdener Str. 162
D-40595 Düsseldorf 
Germany 
49 21 173 910
Visit this company's website


Facility : Düsseldorf, Germany

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[G]
52.009.100 3/4" C. HOT MLTPL
52.009.200 3/4" C. HOT MLTPL

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Mechanical Plumbing Devices

Trade Designation      

Valves[G]
50.005.100 Cartridge Valve      
50.005.101 Cartridge valve      
50.005.800      
50.005.801      
50.005.850      
50.007.101      
50.007.801      
50.007.806 Solenoid Cartridge Valve[1]      
50.009.101      
50.009.801      
51.005.100      
51.005.125      
T01 50.009.800      
T02 50.009.800      

[1] Certified for models that include: 
    G 1/2 male threads 
    G 3/8 male threaded with G 3/8 female threads 
    G 3/8 male threaded with G 1/2 female threads 
    Model with sockets for customer provided fitting adapters.

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings [G]
CF-13 2MFC[1] 3/4" x 3/4" x 3/4" D. HOT MLTPL
CF-13 2MFO[1] 1/2" x ¾" x ¾" x ¾" D. HOT MLTPL
CF-17 2MFC[1] 3/4" C. HOT MLTPL
CF-17 2MFO[1] 3/4" C. HOT MLTPL
CF-17 3MFC[1] 3/4" C. HOT MLTPL
CF-17 3MFO[1] 3/4" C. HOT MLTPL
CF-17 C (cross piece)[1] 3/4" C. HOT MLTPL
CF-17 L (L-piece)[1] 3/4" C. HOT MLTPL
CF-17 T (T-piece)[1] 3/4" C. HOT MLTPL
CF-H G Connector 3/4"x1/8"-3/4"x1/4" C. HOT MLTPL
CF-H L 90 deg Elbow Connector 3/4" x 1/2" C. HOT MLTPL
CF-H S Straight Connector 3/4"x3/8"-3/4"x1/2" C. HOT MLTPL

[1] MFC - are models with capped outlets
    MFO - are models without capped outlets
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.


 
A.Y. McDonald Manufacturing 
4800 Chavenelle Road
Dubuque, IA 52001 
United States 
563-583-7311


Facility : Santa Fe Springs, CA

Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings
Copper Alloy Press-Connect Pressure Fittings 1/8" - 2 C. HOT BRASS

[1] Certified for the following configurations:
    90º Elbow Drop Ear PXF 1/2" x 3/8" - 1" x 1"
    90º Elbow Brass PXF 1/2" X 3/8" - 2" x 2"
    90º Elbow HI Ear PXF 1/2"
    Elbow Double Drop PXPXF 1/2" - 3/4"
    Union PxP 1/2" - 2"
    Union PxF 1/2" - 2"
    Union PxM 1/2" - 2"
    Vent Elbow PXPXF 1/2" x 1/2" x 1/8" - 3/4" x 3/4" x 1/8"
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Facility : Kyunggi-Do, Republic of Korea

Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings[1] [G]
Copper Press-connect Pressure Fittings 1/2" - 4" C. HOT MLTPL

[1] Certified for the following configurations:
    90º Elbow PXP 1/2" - 4"
    90º Elbow FtgXP 1/2" - 4"
    Short Turn 90° Elbow PXP 1/2" - 4"
    Short Turn 90° Elbow FtgXP 1/2" - 4"
    45º Elbow PXP 1/2" - 4"
    45º Elbow FtgXP 1/2" - 4"
    Short Turn 45° Elbow PXP 1/2" - 4"
    Short Turn 45° Elbow FtgXP 1/2" - 4"
    Cap 1/2" - 4"
    Adapter PXF 1/2" - 4"
    Adapter PxM 1/2" - 4"
    Roll Stop Coupling PXP 1/2" - 4"
    No Stop Coupling PXP 1/2" - 4"
    With Stop Coupling 1/2" - 4"
    Reducing Coupling PXP 3/4" x 1/2" - 4" x 3"
    Reducing Coupling FtgXP 3/4" x 1/2" - 4" x 3"
    Tee PXPXP 1/2" - 4"
    Crossover PXP 1/2" - 3/4"
    Crossover FtgXP 1/2" - 3/4"
    Extended Coupling PXP 1/2" - 2"
    Adapter Ftg x F 1/2" - 2"
    Adapter Ftg x M 1/2" - 2"
    90° ELBOW P x F 1/2" - 2"
    90° ELBOW P x M 1/2" - 2"
    90° EXTENDED STREET ELBOW P x Ftg 3/4"
    TEE P x P x F 1/2" - 4"
    Adapter Flange P x Flange (4BOLT) 1/2" - 4"
    Adapter Flange P x Flange (8BOLT) 2 1/2" - 4"
    MANIFOLDS P x P 1" x 1/2" - 1" x 3/4"
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
A.Y. McDonald Mfg. Co. 
P.O. Box 508
Dubuque, IA 52004-0508 
United States 
563-583-7311
Visit this company's website


Facility : Zhejiang, China

Mechanical Plumbing Devices

Trade Designation      

Hot Water Dispenser Components[1] [2] [G]

72004QT 1/2 Boiler Drain Quater Turn
     

72004QT 3/4 Boiler Drain Quater Turn
     

72008QT 1/2 Boiler Drain Quater Turn Ball Valve
     

72008QT 3/4 Boiler Drain Quater Turn Ball Valve
     

[1] Product also complies to NSF/ANSI 372.
[2] This product was evaluated with 82°C water based on its end use as a hot water heater
    outlet.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Valves[G]

72014QT VLV QTR TN SIL 1/2" CUP
     

72014QT VLV QTR TN SIL 3/4" CUP
     

72015QT VLV QTR TURN SILCOCK 1/2"
     

72015QT VLV QTR TURN SILCOCK 3/4"
     

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
ABB Ltd. 
Oldends Lane
Stonehouse, Glos 
GL10 3TA 
United Kingdom 
44 14 5382 6661


Facility : Warminster, PA

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Water Meters[1] [G]
AquaMaster FEF >= 250 mm CLD 23 MLTPL
AquaMaster FER 40 mm - 600 mm CLD 23 MLTPL
AquaMaster FEW 40 mm - 2400 mm CLD 23 MLTPL
FEW XYZ.F >= 250 mm CLD 23 MLTPL
FEW XYZ.R 40 mm - 600 mm CLD 23 MLTPL
WaterMaster FEF >= 250 mm CLD 23 MLTPL
WaterMaster FER 40 mm - 600 mm CLD 23 MLTPL
WaterMaster FEW 40 mm - 2400 mm CLD 23 MLTPL

[1] For all meters:
    X - Type of electronics
        4 - AquaMaster
        5 - WaterMaster
    Y - Tier of Electronics
        1 - Standard Electronics
        3 - Advanced Electronics
        5 - Premium Electronics
    Z - Type of mounting
        1 - Integral
        2 - Remote
    Type of bore and liner
    F - FEF/Full bore/Rubber liner
    R - FER/Reduced bore/Rubber liner
    
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.


Facility : Shanghai, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Water Meters[G]
Aquamaster FEW 40 mm - 2400 mm CLD 23 MLTPL
WaterMaster FEW 40 mm - 2400 mm CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.


Facility : Glos, United Kingdom

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Water Meters[1] [G]
AquaMaster FEF >= 250 mm CLD 23 MLTPL
AquaMaster FER 40 mm - 600 mm CLD 23 MLTPL
AquaMaster FEV 40 mm - 200 mm CLD 23 MLTPL
FEW XYZ.F >= 250 mm CLD 23 MLTPL
FEW XYZ.R 40 mm - 600 mm CLD 23 MLTPL
FEW XYZ.V 40 mm - 200 mm CLD 23 MLTPL
WaterMaster FEF >= 250 mm CLD 23 MLTPL
WaterMaster FER 40 mm - 600 mm CLD 23 MLTPL
WaterMaster FEV 40 mm - 200 mm CLD 23 MLTPL

[1] For all meters:
    X - Type of electronics
        4 - AquaMaster
        5 - WaterMaster
    Y - Tier of Electronics
        1 - Standard Electronics
        3 - Advanced Electronics
        5 - Premium Electronics
    Z - Type of mounting
        1 - Integral
        2 - Remote
    Type of bore and liner:
    F - FEF/Full bore/Rubber liner
    R - FER/Reduced bore/Rubber liner
    V – FEV/Optimized bore/PP liner
    
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.


 
ABB S.p.A. 
Via Luigi Vaccani, 4
22016 Ossuccio, Como 
Italy 
39 03 445 8111
Visit this company's website


Facility : Warminster, PA

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Transmitters/Gauges[G]
261AS ABSOLUTE PRESS XMTR 60 x 60 x 112 mm C. HOT MLTPL
261GS GAUGE PRESS XMTR 60 x 60 x 112 mm C. HOT MLTPL
266DSH Differential Pressure Transmitter 142 x 142 x 210 mm C. HOT MLTPL
266HSH Gauge Pressure Transmitter 142 x 91 x 215 mm C. HOT MLTPL
266NSH Absolute Pressure Transmitter 142 x 91 x 215 mm C. HOT MLTPL

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
ABSFIL Co., Ltd. 
#115-9, Namyang-Ro
Gyeonggi-Do, Hwaseong-si 18281 
Korea, Republic of 
82 70 4310 5241
Visit this company's website


Facility : Chungju-Si, Republic of Korea

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filtration Devices/Components
PREIII-Y-Z[1] [2] [3] [4] CLD 23 PP

[1] Certification does not include inner core, adapters, o-rings, gaskets, or end caps.
[2] PRE III-Y-Z is denoted as follows:
    Y - Micron rating (um)
        0.5 - 100
    Z - Length (in)
        5 - 50
[3] Certified for use in municipal water treatment facilities.
[4] Certified for a minimum flow rate of 6840 liters per day.



 
ABZ Valves & Controls 
P.O. Box 157
Madison, KS 66860 
United States 
855-803-6786 
620-437-2440


Facility : # 1 China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[1]
411-052 2" - 48" CLD 23 MLTPL
412-052 2" - 48" CLD 23 MLTPL
431-052 2" - 48" CLD 23 MLTPL
432-052 2" - 48" CLD 23 MLTPL
575 2" - 48" CLD 23 MLTPL
806 2" - 48" CLD 23 MLTPL
807 2" - 48" CLD 23 MLTPL
815 2" - 48" CLD 23 MLTPL
816 2" - 48" CLD 23 MLTPL

[1] Certified for equivalent metric sizes.



 
ABZ Valves & Controls 
920 Memorial City Way
Suite 1000 
Houston, TX 77024 
United States 
281-949-2500


Facility : Incheon, Republic of Korea

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves [G]
Series 401/402 (Class 150) High Performance Butterfly Valve[1] 2" - 72" CLD 23 MLTPL
Series 403 (Class 150) High Performance Butterfly Valve[2] 3" - 72" CLD 23 MLTPL
Series 421/422 (Class 300) High Performance Butterfly Valve[1] 2" - 48" CLD 23 MLTPL
Series 423 (Class 300) High Performance Butterfly Valve[2] 3" - 48" CLD 23 MLTPL
Series 451/452 (Class 600) High Performance Butterfly Valve[1] 3" - 24" CLD 23 MLTPL
Series 453 (Class 600) High Performance Butterfly Valve[2] 4" - 24" CLD 23 MLTPL

[1] Certified for trims 100, 101, 102, 103, 118, 125, 126, 129, 182, and 183.
[2] Certified for trims 102, 103, 125, 126, 183.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Accella Polyurethane Systems, LLC DBA Carlisle Roof Foam and Coatings 
2500 Adie Road
Maryland Heights, MO 63043 
United States 
770-528-9556
Visit this company's website


Facility : Maryland Heights, MO

Protective (Barrier) Materials

    Water Water
  Water Contact Contact Contact
Trade Designation Size Restriction Temp Material

Coatings – Fittings[1]
Intellathane ELITE SHIELD – 61 >= 5” CLD 23 PUA

[1] Colors: Neutral, Black
    Number of Coats: 1-4
    Maximum Field Use Dry Thickness (in mils): 100 mils (20 mils/coat)
    Recoat Cure Time and Temperature: 5 seconds at 72F
    Final Cure Time/Temperature: 72 hours at 72F
    Special Comments: Mix ratio of Part A:B is 1:1 by volume.

Coatings – Pipe[1]
Intellathane ELITE SHIELD – 61 >= 5” CLD 23 PUA

[1] Colors: Neutral, Black
    Number of Coats: 1-4
    Maximum Field Use Dry Thickness (in mils): 100 mils (20 mils/coat)
    Recoat Cure Time and Temperature: 5 seconds at 72F
    Final Cure Time/Temperature: 72 hours at 72F
    Special Comments: Mix ratio of Part A:B is 1:1 by volume.

Coatings – Pump[1]
Intellathane ELITE SHIELD – 61 >= 5” CLD 23 PUA

[1] Colors: Neutral, Black
    Number of Coats: 1-4
    Maximum Field Use Dry Thickness (in mils): 100 mils (20 mils/coat)
    Recoat Cure Time and Temperature: 5 seconds at 72F
    Final Cure Time/Temperature: 72 hours at 72F
    Special Comments: Mix ratio of Part A:B is 1:1 by volume.

Coatings – Tank[1]
Intellathane ELITE SHIELD – 61 >= 1000 gal. CLD 23 PUA

[1] Colors: Neutral, Black
    Number of Coats: 1-4
    Maximum Field Use Dry Thickness (in mils): 100 mils (20 mils/coat)
    Recoat Cure Time and Temperature: 5 seconds at 72F
    Final Cure Time/Temperature: 72 hours at 72F
    Special Comments: Mix ratio of Part A:B is 1:1 by volume.

Coatings – Valve[1]
Intellathane ELITE SHIELD – 61 >= 5” CLD 23 PUA

[1] Colors: Neutral, Black
    Number of Coats: 1-4
    Maximum Field Use Dry Thickness (in mils): 100 mils (20 mils/coat)
    Recoat Cure Time and Temperature: 5 seconds at 72F
    Final Cure Time/Temperature: 72 hours at 72F
    Special Comments: Mix ratio of Part A:B is 1:1 by volume.



Facility : Chattanooga, TN

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Grouts[1]
URETEK [2] CLD 23 PUR
URETEK Geopolymer [2] CLD 23 PUR
Uretek 2F [2] CLD 23 PUR
Uretek 2R [2] CLD 23 PUR
Uretek 3F [2] CLD 23 PUR
Uretek 3R [2] CLD 23 PUR
Uretek 4F [2] CLD 23 PUR
Uretek 4R [2] CLD 23 PUR
Uretek 4S [2] CLD 23 PUR
Uretek 5R [2] CLD 23 PUR
Uretek 6R [2] CLD 23 PUR

[1] Certified for product with the following densities and reaction speeds:
    2 pounds per cubic foot (regular speed)
    2 pounds per cubic foot (fast speed)
    3 pounds per cubic foot (regular speed)
    3 pounds per cubic foot (fast speed)
    4 pounds per cubic foot (slow speed)
    4 pounds per cubic foot (regular speed)
    4 pounds per cubic foot (fast speed)
    5 pounds per cubic foot (regular speed)
    6 pounds per cubic foot (regular speed)
    
    Mix ratio is 1:1 (A:B) by volume or 8.1:6.9 (A:B) by weight.
    Minimum cure time is 60 minutes at ambient temperatures.
[2] Certified for a maximum surface area to volume ratio of 0.375 square inches per liter.



 
Accent Control Systems 
2101 Potshop Lane
Norristown, PA 19403 
United States 
610-630-7640


Facility : Ningbo, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Water Meters[G]
GLF-062/GLF-062-R 5/8" x 1/2" CLD 23 MLTPL
GLF-075/GLF-075-R 5/8" x 3/4" CLD 23 MLTPL
GLF-100/GLF-100-R 3/4" x 1" CLD 23 MLTPL
GLF-100F/GLF-100F-R 1" CLD 23 MLTPL
GLF-150/GLF-150-R 1 1/2" CLD 23 MLTPL
GLF-200(F)/GLF-200-R(F) 2" CLD 23 MLTPL
GLF-200/GLF-200-R 2" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Access-Able Technologies, Inc. 
1275 Bennett Drive #115
Longwood, FL 32750 
United States 
800-572-4894 
407-834-2999


Facility : # 1 USA

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Patching Materials [G]
Pow-R Stick Steel Hard Epoxy Putty (Copper Color) [1] [2] C. HOT EPOXY
Pow-R Stick Steel Hard Epoxy Putty (Grey Color) [1] [2] C. HOT EPOXY
Pow-R Stick Steel Hard Epoxy Putty (White Color) [1] [2] C. HOT EPOXY
STIC-O-STEEL POW-R Putty [1] [2] C. HOT EPOXY

[1] Certified for a maximum surface area to volume ratio of 0.3 sq. in./L in pipe or 1% of a
    20,000 gallon tank.
[2] To obtain the proper mix, use at least a 3/4" length, but no more than 1/3 of a full
    stick, of product which has been cut with a knife. Product must be mixed for 60-90
    seconds.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Accimin SA de CV 
Lafayette No. 121. Col. Anzures
Mexico City 11590 
México 
52 55 11010920
Visit this company's website


Facility : Tlalnepantla, Mexico

Process Media

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filtration Media[1]
Dicamex 4107 31.06 µm CLD 23 PERL
Dicamex 4127 42.29 µm CLD 23 PERL
Dicamex 4147 44.76 µm CLD 23 PERL
Dicamex 4157 37.26 µm CLD 23 PERL
Dicamex 417 14 µm CLD 23 PERL
Dicamex 4187 45.38 µm CLD 23 PERL
Dicamex 4217 50.37 µm CLD 23 PERL
Dicamex 427 15.44 µm CLD 23 PERL
Dicamex 4337 53.37 µm CLD 23 PERL
Dicamex 437 29.77 µm CLD 23 PERL
Dicamex 447 28.6 µm CLD 23 PERL
Dicamex 477 29.37 µm CLD 23 PERL
Dicamex CP 150 34.57 µm CLD 23 PERL
Dimesa 4187 45.38 µm CLD 23 PERL
Dimesa 4337 58.65 µm CLD 23 PERL

[1] Certified for a  maximum use level of 1,200 mg/L.

NOTE: Certified for water treatment plant applications.
      This product has not been evaluated for point of use applications.


 
Accor Technology Inc. 
1400 - 112th Avenue South East
Suite 100 
Bellevue, WA 98004 
United States 
800-447-5848 
509-662-0608


Facility : East Wenatchee, WA

Mechanical Plumbing Devices

Trade Designation      

Connector Hoses

Riser Assemblies[1]
R-5CP(1)-7(2)      
R-5CS(1)-7(2)      
R-5LP(1)-5(2)      
R-5LS(1)-5(2)      
R-CP(1)-7(2)      
R-CS(1)-7(2)      
R-LP(1)-3(2)      
R-LP(1)-5(2)      
R-LS(1)-3(2)      
R-LS(1)-5(2)      
R2-IP(1)-2(2)      
R3-LP(1)-3(2)      
RCP45T12-7(2)      

[1] (1) Hose length
    (2) Packaging options (M, F, E, EL, CF, CM, PF, FM, XM, XF, XE, XL, XC, or R)

Supply Stops

Coupling w/ attached riser[1] [G]
PR30-LP(1)-3(2)      
PR30-SP(1)-3(2)      
PR50-CP(1)-7(2)      
PR50-CS(1)-7(2)      
PR50-LP(1)-3(2)      
PR50-LP(1)-5(2)      
PR50-LS(1)-3(2)      
PR50-LS(1)-5(2)      
PR50-P(1)-RK(2)      
PR50-S(1)-RK(2)      
PR50-SP(1)-5(2)      

[1] (1) Hose length
    (2) Packaging options (M, F, E, EL, CF, CM, PF, FM, XM, XF, XE, XL, XC, or R)
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Valve or Coupling[1] [G]
PC5-3(2)      
PC5S-3(2)      
PE5-3(2)      
PE5S-3(2)      
PO5-2(2)      
PO5-3(2)      
PO5-75(2)      
PO5-CAP(2)      
PR-30(2)      
PR-50(2)      
TH5-3(2)      

[1] (1) Hose length
    (2) Packaging options (M, F, E, EL, CF, CM, PF, FM, XM, XF, XE, XL, XC, or R)
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Valve w/ attached riser[1] [G]
PC5-CP(1)-7(2)      
PC5-CS(1)-7(2)      
PC5-LP(1)-5(2)      
PC5-LS(1)-5(2)      
PE5-CP(1)-7(2)      
PE5-CS(1)-7(2)      
PE5-LP(1)-5(2)      
PE5-LS(1)-5(2)      
PO5-CP(1)-7(2)      
PO5-CS(1)-7(2)      
PO5-IP(1)-2(2)      
PO5-LP(1)-3(2)      
PO5-LP(1)-5(2)      
PO5-LP4T15-5(2)      
PO5-LS(1)-3(2)      
PO5-LS(1)-5(2)      
PO5-LS4T15-5(2)      
PO5-P(1)-RK(2)      
PO5-P-PR30(2)      
PO5-S(1)-RK(2)      
PO5-S-PR30(2)      
PO5P10T10RK(2)      

[1] (1) Hose length
    (2) Packaging options (M, F, E, EL, CF, CM, PF, FM, XM, XF, XE, XL, XC, or R)
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
ACCOR Technology, Inc. 
608 State Street South
Suite 100 
Kirkland, WA 98033 
United States 
877-647-5870 
425-284-3320
Visit this company's website


Facility : East Wenatchee, WA

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Miscellaneous Process Devices/Components[G]
PushOn 113A Accor Arrester 1/2" C. HOT MLTPL
PushOn 109A Accor Arrester 1/2" C. HOT MLTPL

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings [G]
PF50C XE[1] 1/2" C. HOT MLTPL
PF50E XE[1] 1/2" C. HOT MLTPL
PF50MT XE[2] 1/2" C. HOT MLTPL
PF50T XE[1] 1/2" C. HOT MLTPL
PF75C XE[1] 3/4" C. HOT MLTPL
PF75E XE[1] 3/4" C. HOT MLTPL
PF75T XE[1] 3/4" C. HOT MLTPL

[1] Configuration code breakdown: 
    P  – PushOn 
    F  – Fitting 
    50 - 1/2" 
    75 - 3/4" 
    M  – Manifold 
    T  – Tee 
    C  – Coupling 
    E  – Elbow 
    X  – Compatible with PEX pipe (as well as copper and CPVC) 
    E  – Bulk packaged (each)
[2] PF50MT XE – 1/2" PushOnManifold Tee Code: 
    P  – PushOn 
    F  – Fitting 
    50 – 1/2 inch 
    M  – Manifold 
    T  – Tee 
    X  – Compatible with PEX pipe (as well as copper and CPVC). 
    E  – Bulk packaged (each)
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
ACCUCAST Ltd. 
415 South 21ST Street
Waco, TX 76706 
United States 
254-756-3200
Visit this company's website


Facility : Shanxi, China

Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings[1] [G]
Ductile Iron C110 Flanged Pipe Fittings 3" - 12" CLD 23 ASPH
Ductile Iron C153 Mechanical Joint Pipe Fittings 3" - 12" CLD 23 ASPH

[1] Certification does not include gaskets.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Accuflex Industrial Hose Ltd. 
760 Imperial Road North
Guelph, ON N1K 1Z3 
Canada 
519-836-5460
Visit this company's website


Facility : Guelph, Ontario, Canada

Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Tubing/Hose [G]
Bev-Flex® 172 1/4" - 1" CLD 23 PE
Bev-Seal® 176 1/4" - 1" CLD 23 PE
Bev-Seal® 228 1/4" - 1" CLD 23 PE
Bev-Seal® Ultra 175 3/16" - 1" CLD 23 PET
Bev-Seal® Ultra 235 3/16" - 1" CLD 23 PET
Bevlex® 170 1/4" - 1" CLD 23 PE
Bevlex® 174 1/4" - 1" CLD 23 PE
Bevlex® 222 1/4" - 1" CLD 23 PE
Bevlex® 222YYY[1] 1/4" - 1" CLD 23 PE
Bevlex® 224 1/4" - 1" CLD 23 PE
Bevlex® Plus 180 3/16" - 1" CLD 23 PET
Kuri Tec® A3236 1/4" - 1" CLD 23 PE
Kuri Tec® A3246 1/4" - 1" CLD 23 PE

[1] YYY denotes color for the outermost layer. Color codes are:
    BLK  - Black
    BLU  - Blue
    DGRY - Dark Gray
    GRN  - Green
    LGRY - Light Gray 
    RED  - Red
    WHT  - White
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Ace Hardware Corporation 
2200 Kensington Ct
Oakbrook, IL 60523 
United States 
630-990-8686
Visit this company's website


Facility : Omaha, NE

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Sealants
ACE PIPE THREAD COMPOUND TFE PASTE >= 1/2" C. HOT SLT
Ace Pipe Thread Compound >= 1/2" C. HOT SLT



 
Ace Roto-Mold 
Division of Den Hartog Industries Inc.
4010 Hospers Drive South 
P.O. Box 425 
Hospers, IA 51238-0425 
United States 
800-342-3408 
712-752-8432
Visit this company's website


Facility : Hospers, IA

Protective (Barrier) Materials

    Water Water
  Water Contact Contact Contact
Trade Designation Size Restriction Temp Material

Tanks
ACT1000-LP Cistern Tank[1] 1000 gal. CLD 23 MLTPL
ACT1500-LP Cistern Tank[1] 1500 gal. CLD 23 MLTPL
ACT2000-LP Cistern Tank[1] 2000 gal. CLD 23 MLTPL
ACT2500-LP Cistern Tank[1] 2500 gal. CLD 23 MLTPL
ARM-10115 Stock Tank[1] 50 gal. CLD 23 MLTPL
ARM-10116 Stock Tank[1] 100 gal. CLD 23 MLTPL
ARM-10117 Stock Tank[1] 150 gal. CLD 23 MLTPL
ARM-10135 Stock Tank[1] 920 gal. CLD 23 MLTPL
ARM-10138 Stock Tank[1] 320 gal. CLD 23 MLTPL
ARM-10139 Stock Tank[1] 610 gal. CLD 23 MLTPL
ARM-19455 Stock Tank[1] 120 gal. CLD 23 MLTPL
AST-0325-1W Cistern Tank[1] 325 gal. CLD 23 MLTPL
AST-0525-1W Cistern Tank[1] 525 gal. CLD 23 MLTPL
AST-0850-1W Cistern Tank[1] 850 gal. CLD 23 MLTPL
AST-1150-1W Cistern Tank[1] 1150 gal. CLD 23 MLTPL
AST-1450-1W Cistern Tank[1] 1450 gal. CLD 23 MLTPL
AST-1700-1W Cistern Tank[1] 1700 gal. CLD 23 MLTPL
CB00150-36 Cone Bottom Tank[1] 150 gal. CLD 23 MLTPL
CB00200-42 Cone Bottom Tank[1] 200 gal. CLD 23 MLTPL
CB00300-42 Cone Bottom Tank[1] 300 gal. CLD 23 MLTPL
CB00350-42 Cone Bottom Tank[1] 350 gal. CLD 23 MLTPL
CB00500-52 Cone Bottom Tank[1] 500 gal. CLD 23 MLTPL
CB0055-23 Batch Tank - Cone Bottom[1] 55 gal. CLD 23 MLTPL
CB00800-86 Cone Bottom Tank[1] 800 gal. CLD 23 MLTPL
CB0100-23 Batch Tank - Cone Bottom[1] 100 gal. CLD 23 MLTPL
CB0145-36 Batch Tank - Cone Bottom[1] 145 gal. CLD 23 MLTPL
CB0200-36 Batch Tank - Cone Bottom[1] 200 gal. CLD 23 MLTPL
CB0250-36 Batch Tank - Cone Bottom[1] 250 gal. CLD 23 MLTPL
CB0325-36 Batch Tank - Cone Bottom[1] 325 gal. CLD 23 MLTPL
CB0345-52 Cone Bottom Tank[1] 345 gal. CLD 23 MLTPL
CB0750-52 Cone Bottom Tank[1] 750 gal. CLD 23 MLTPL
CB0850-90 Cone Bottom Tank[1] 850 gal. CLD 23 MLTPL
CB1000-64 Cone Bottom Tank[1] 1000 gal. CLD 23 MLTPL
CB1000-90 Cone Bottom Tank[1] 1000 gal. CLD 23 MLTPL
CB1005-64 Cone Bottom Tank[1] 1005 gal. CLD 23 MLTPL
CB1150-90 Cone Bottom-Industrial Top[1] 1150 gal. CLD 23 MLTPL
CB1200-90 Cone Bottom Tank[1] 1200 gal. CLD 23 MLTPL
CB1300-90 Cone Bottom Tank[1] 1300 gal. CLD 23 MLTPL
CB1490-64 Cone Bottom Tank[1] 1490 gal. CLD 23 MLTPL
CB1500-64 Cone Bottom Tank [1] 1500 gal. CLD 23 MLTPL
CB1500-64 Conebottom Tank[1] 1500 gal. CLD 23 MLTPL
CB1500-96 Cone Bottom Tank[1] 1500 gal. CLD 23 MLTPL
CB1550-90 Cone Bottom Tank[1] 1550 gal. CLD 23 MLTPL
CB1600-90 Cone Bottom Tank[1] 1600 gal. CLD 23 MLTPL
CB1700-86 Cone Bottom Tank[1] 1700 gal. CLD 23 MLTPL
CB2000-96 Cone Bottom Tank[1] 2000 gal. CLD 23 MLTPL
CB2450-90 Cone Bottom Tank[1] 2450 gal. CLD 23 MLTPL
CB2495-90 Cone Bottom Tank [1] 2495 gal. CLD 23 MLTPL
CB2495-90 Cone Bottom-Industrial Top[1] 2495 gal. CLD 23 MLTPL
CB2500-90 Cone Bottom Tank[1] 2500 gal. CLD 23 MLTPL
CB2550-90 Cone Bottom Tank[1] 2550 gal. CLD 23 MLTPL
CB2600-86 Cone Bottom Tank[1] 2600 gal. CLD 23 MLTPL
CB2600-90 Cone Bottom Tank[1] 2600 gal. CLD 23 MLTPL
CB3000-90 Cone Bottom Tank[1] 3000 gal. CLD 23 MLTPL
CB3000-96 Cone Bottom Tank[1] 3000 gal. CLD 23 MLTPL
CB4200-122 Cone Bottom Tank [1] 4200 gal. CLD 23 MLTPL
CB4600-102 Cone Bottom Tank[1] 4600 gal. CLD 23 MLTPL
CB4600-102 Cone Bottom Tank[1] 4600 gal. CLD 23 MLTPL
CB4900-102 Cone Bottom Tank[1] 4900 gal. CLD 23 MLTPL
CB4900-102 Cone Bottom Tank[1] 4900 gal. CLD 23 MLTPL
CB6000-122 Cone Bottom Tank [1] 6000 gal. CLD 23 MLTPL
CB6900-102 Cone Bottom Tank[1] 6900 gal. CLD 23 MLTPL
CB8250-122 Cone Bottom Tank[1] 8250 gal. CLD 23 MLTPL
CBFD240-42 Cone Bottom Tank[1] 240 gal. CLD 23 MLTPL
DW0065-28 Double Wall Vertical Tank[2] [4] 65 gal. CLD 23 MLTPL
DW0120-36 Double Wall Vertical Tank[2] [4] 120 gal. CLD 23 MLTPL
DW0150-36 Double Wall Vertical Tank[2] [4] 150 gal. CLD 23 MLTPL
DW0300-57 Double Wall Vertical Tank[2] [4] 300 gal. CLD 23 MLTPL
DW0500-57 Double Wall Vertical Tank[2] [4] 500 gal. CLD 23 MLTPL
DW1000-77 Double Wall Vertical Tank[2] [4] 1000 gal. CLD 23 MLTPL
DW1500-77 Double Wall Vertical Tank[2] [4] 1500 gal. CLD 23 MLTPL
DW2000-102 Double Wall Vertical Tank[2] [4] 2000 gal. CLD 23 MLTPL
DW2500-120 Double Wall Vertical Tank[2] [4] 2500 gal. CLD 23 MLTPL
DW3000-120 Double Wall Vertical Tank[1] 3000 gal. CLD 23 MLTPL
DW3500-120 Double Wall Vertical Tank[1] 3500 gal. CLD 23 MLTPL
DW6000-120 Double Wall Vertical Tank[2] [4] 6000 gal. CLD 23 MLTPL
DW6500-120 Double Wall Vertical Tank[2] [4] 6500 gal. CLD 23 MLTPL
FM0015-14S Leg Tank[1] 15 gal. CLD 23 MLTPL
FM0025-16S Leg Tank[1] 25 gal. CLD 23 MLTPL
FM00925-DS Leg Tank[1] 925 gal. CLD 23 MLTPL
FM01065-56 Leg Tank[1] 1065 gal. CLD 23 MLTPL
FM01300-DS Leg Tank[1] 1300 gal. CLD 23 MLTPL
FM1010-48 Leg Tank [1] 1010 gal. CLD 23 MLTPL
FM1610-78S Leg Tank[1] 1610 gal. CLD 23 MLTPL
FM1750-62S Leg Tank[1] 1750 gal. CLD 23 MLTPL
FM1800-2S Leg Tank[1] 1800 gal. CLD 23 MLTPL
FM1850-78S Leg Tank[1] 1850 gal. CLD 23 MLTPL
FM2350-2S Leg Tank[1] 2350 gal. CLD 23 MLTPL
FM2600-2S Leg Tank[1] 2600 gal. CLD 23 MLTPL
FM2750-88 Leg Tank[1] 2750 gal. CLD 23 MLTPL
FM3200-2S Leg Tank[1] 3200 gal. CLD 23 MLTPL
FM3250-88 Leg Tank [1] 3250 gal. CLD 23 MLTPL
FM3750-88S Leg Tank[1] 3750 gal. CLD 23 MLTPL
FM4200-92 Leg Tank[1] 4200 gal. CLD 23 MLTPL
FM4250-88 Leg Tank [1] 4250 gal. CLD 23 MLTPL
FS00125-35 Leg Tank[1] 125 gal. CLD 23 MLTPL
FS00165-32 Leg Tank[1] 165 gal. CLD 23 MLTPL
FS00225-38 Leg Tank[1] 225 gal. CLD 23 MLTPL
FS00325-38 Leg Tank[1] 325 gal. CLD 23 MLTPL
FS00335-44 Leg Tank[1] 335 gal. CLD 23 MLTPL
FS0035-18 Leg Tank[1] 35 gal. CLD 23 MLTPL
FS00510-57 Leg Tank[1] 510 gal. CLD 23 MLTPL
FS00535-48 Leg Tank[1] 535 gal. CLD 23 MLTPL
FS0055-23 Leg Tank[1] 55 gal. CLD 23 MLTPL
FS0065-24 Leg Tank[1] 65 gal. CLD 23 MLTPL
FS0070-24 Leg Tank[1] 70 gal. CLD 23 MLTPL
FS00735-48 Leg Tank[1] 735 gal. CLD 23 MLTPL
FS00925-DW Leg Tank[1] 925 gal. CLD 23 MLTPL
FS01005-48 Leg Tank[1] 1005 gal. CLD 23 MLTPL
FS01035-78 Leg Tank[1] 1035 gal. CLD 23 MLTPL
FS01065-56W Leg Tank[1] 1065 gal. CLD 23 MLTPL
FS01300-DW Leg Tank[1] 1300 gal. CLD 23 MLTPL
FS01600 Sectional Tank[1] 1600 gal. CLD 23 MLTPL
FS01610 Flat Bottom Leg Tank[1] 1610 gal. CLD 23 MLTPL
FS1750-62W Leg Tank[1] 1750 gal. CLD 23 MLTPL
FS1800-2W Leg Tank[1] 1800 gal. CLD 23 MLTPL
FS1850-78 Leg Tank[1] 1850 gal. CLD 23 MLTPL
FS2350-88 Leg Tank[1] 2350 gal. CLD 23 MLTPL
FS2600-2W Leg Tank[1] 2600 gal. CLD 23 MLTPL
FS2750-88 Leg Tank[1] 2750 gal. CLD 23 MLTPL
FS3250-88 Leg Tank[1] 3250 gal. CLD 23 MLTPL
FS3250-88 Leg Tank[1] 3250 gal. CLD 23 MLTPL
FS4200-92 Leg Tank[1] 4200 gal. CLD 23 MLTPL
FS4250-88 Leg Tank[1] 4250 gal. CLD 23 MLTPL
GV07000-142 Vertical Tank 7000 gal. CLD 23 PE
GV1050-86 Gusseted Top Tank[1] 1050 gal. CLD 23 MLTPL
GV10500-142 Vertical Tank 10500 gal. CLD 23 PE
GV12500-142 Vertical Polyethylene Storage Tank 12500 gal. CLD 23 PE
GV1350-86 Gusseted Top Tank[1] 1350 gal. CLD 23 MLTPL
GV1500-86 Gusseted Top Tank[1] 1500 gal. CLD 23 MLTPL
GV15500-142 Vertical Tank 15500 gal. CLD 23 PE
GV1650-86 Gusseted Top Tank[1] 1650 gal. CLD 23 MLTPL
GV4995-142 Gusset Top Vertical Tank[1] 4995 gal. CLD 23 MLTPL
HE0085-36 Elliptical Tank [1] 85 gal. CLD 23 MLTPL
HE0200-41 Elliptical Tank[1] 200 gal. CLD 23 MLTPL
HE0300-48 Elliptical Tank[1] 300 gal. CLD 23 MLTPL
HE0400-57 Elliptical Tank[1] 400 gal. CLD 23 MLTPL
HE0500-57 Elliptical Tank[1] 500 gal. CLD 23 MLTPL
HE0600-64 Elliptical Tank [1] 600 gal. CLD 23 MLTPL
HE0750-69 Elliptical Tank[1] 750 gal. CLD 23 MLTPL
HE0850-69 Elliptical Tank[1] 850 gal. CLD 23 MLTPL
HE1000-78 Elliptical Tank[1] 1000 gal. CLD 23 MLTPL
HE1250-78 Elliptical Tank[1] 1250 gal. CLD 23 MLTPL
HE1600-78 Elliptical Tank[1] 1600 gal. CLD 23 MLTPL
HED0500-57 Elliptical Tank[1] 500 gal. CLD 23 MLTPL
HED0750-69 Elliptical Tank[1] 750 gal. CLD 23 MLTPL
HED0850-69 Elliptical Tank[1] 850 gal. CLD 23 MLTPL
HED1000-78 Elliptical Tank[1] 1000 gal. CLD 23 MLTPL
HED1250-78 Elliptical Tank[1] 1250 gal. CLD 23 MLTPL
HED1600-78 Elliptical Tank[1] 1600 gal. CLD 23 MLTPL
HZ00100 Horizontal Tank[1] 100 gal. CLD 23 MLTPL
HZ0025-23 Horizontal Tank[1] 25 gal. CLD 23 MLTPL
HZ0055-23 Horizontal Tank[1] 55 gal. CLD 23 MLTPL
HZ0075-24 Horizontal Tank[1] 75 gal. CLD 23 MLTPL
HZ0095-24 Horizontal Tank[1] 95 gal. CLD 23 MLTPL
HZ0110-30 Horizontal Tank[1] 110 gal. CLD 23 MLTPL
HZ0150-30 Horizontal Tank[1] 150 gal. CLD 23 MLTPL
HZ0150-32 Horizontal Tank[1] 150 gal. CLD 23 MLTPL
HZ0200-32 Horizontal Tank[1] 200 gal. CLD 23 MLTPL
HZ0200-38 Horizontal Tank[1] 200 gal. CLD 23 MLTPL
HZ0300-38 Horizontal Tank[1] 300 gal. CLD 23 MLTPL
HZ0400-42 Horizontal Tank[1] 400 gal. CLD 23 MLTPL
HZ0500-48 Horizontal Tank[1] 500 gal. CLD 23 MLTPL
IBFD10-SET Inductor Tank[1] 10 gal. CLD 23 MLTPL
IBFD15-Set Inductor Tank[1] 15 gal. CLD 23 MLTPL
IBFD20-SET Inductor Tank[1] 20 gal. CLD 23 MLTPL
IBFD35-SET Inductor Tank[1] 35 gal. CLD 23 MLTPL
IBFD60-SET Inductor Tank[1] 60 gal. CLD 23 MLTPL
IN0015-19 Inductor Tank[1] 15 gal. CLD 23 MLTPL
IN0015-19SM Inductor Tank[1] 15 gal. CLD 23 MLTPL
IN0030-24 Inductor Tank[1] 30 gal. CLD 23 MLTPL
IN0055-24 Inductor Tank [1] 55 gal. CLD 23 MLTPL
IN0085-30 Inductor Tank[1] 85 gal. CLD 23 MLTPL
IN0110-30 Inductor Tank[1] 110 gal. CLD 23 MLTPL
INFD07-15 Inductor Tank [1] 7 gal. CLD 23 MLTPL
INFD085 Full Drain Inductor[1] 85 gal. CLD 23 MLTPL
INFD10-15 Inductor Tank [1] 10 gal. CLD 23 MLTPL
INFD110-30 Inductor Tank[1] 110 gal. CLD 23 MLTPL
INFD15-19 Inductor Tank[1] 15 gal. CLD 23 MLTPL
INFD30-24 Inductor Tank[1] 30 gal. CLD 23 MLTPL
INFD40-30 Inductor TanK[1] 40 gal. CLD 23 MLTPL
INFD40-30 Inductor Tank[1] 40 gal. CLD 23 MLTPL
INFD55-24 Inductor Tank[1] 55 gal. CLD 23 MLTPL
INFD60-30 Inductor Tank[1] 60 gal. CLD 23 MLTPL
LP0050-RT Rectangle Tank[1] 50 gal. CLD 23 MLTPL
LP0068-RT Low Profile Tank[1] 68 gal. CLD 23 MLTPL
LP0110-RT Rectangle Tank[1] 110 gal. CLD 23 MLTPL
LP0200-RT Rectangle Tank[1] 200 gal. CLD 23 MLTPL
LP0300-HT Holding Tank[1] 300 gal. CLD 23 MLTPL
LP0300-RT Rectangle Tank[1] 300 gal. CLD 23 MLTPL
OC0055-23 Batch Tank- Cone Bottom-Open Top[1] 55 gal. CLD 23 MLTPL
OC0100-23 Batch Tank- Cone Bottom-Open Top[1] 100 gal. CLD 23 MLTPL
OC0145-36 Batch Tank- Cone Bottom-Open Top[1] 145 gal. CLD 23 MLTPL
OC0200-36 Batch Tank- Cone Bottom-Open Top[1] 200 gal. CLD 23 MLTPL
OC0250-36 Batch Tank- Cone Bottom-Open Top[1] 250 gal. CLD 23 MLTPL
OC0325-36 Batch Tank- Cone Bottom-Open Top[1] 325 gal. CLD 23 MLTPL
OC0840-90 Cone Bottom Tank- Open Top[1] 840 gal. CLD 23 MLTPL
OC1010-64 Cone Bottom Tank- Open top[1] 1010 gal. CLD 23 MLTPL
OC1050-90 Cone Bottom Tank- Open top[1] 1050 gal. CLD 23 MLTPL
OC1150-90 Cone Bottom Tank- Open Top[1] 1150 gal. CLD 23 MLTPL
OC1450-90 Cone Bottom Tank- Open Top[1] 1450 gal. CLD 23 MLTPL
OC1500-64 Cone Bottom Tank- Open Top[1] 1500 gal. CLD 23 MLTPL
OC1710-86 Cone Bottom Tank- Open Top[1] 1710 gal. CLD 23 MLTPL
OC2350-90 Cone Bottom Tank- Open Top[1] 2350 gal. CLD 23 MLTPL
OC2440-90 Cone Bottom Tank- Open Top[1] 2440 gal. CLD 23 MLTPL
OC2610-86 Cone Bottom Tank- Open Top[1] 2610 gal. CLD 23 MLTPL
OP0055-23 Batch Tank- Vertical- Open Top[1] 55 gal. CLD 23 MLTPL
OP0100-23 Batch Tank- Vertical- Open Top[1] 100 gal. CLD 23 MLTPL
OP0145-36 Batch Tank- Vertical- Open Top[1] 145 gal. CLD 23 MLTPL
OP0200-36 Batch Tank- Vertical- Open Top[1] 200 gal. CLD 23 MLTPL
OP0210-40 Open Top[1] 210 gal. CLD 23 MLTPL
OP0250-36 Batch Tank- Vertical- Open Top[1] 250 gal. CLD 23 MLTPL
OP0325-36 Batch Tank- Vertical- Open Top[1] 325 gal. CLD 23 MLTPL
PCO035-16W PCO Tank[1] 35 gal. CLD 23 MLTPL
PCO050-19S PCO Tank[1] 50 gal. CLD 23 MLTPL
PCO050-19W PCO Tank[1] 50 gal. CLD 23 MLTPL
PCO100-30S PCO Tank[1] 100 gal. CLD 23 MLTPL
PCO100-30W PCO Tank[1] 100 gal. CLD 23 MLTPL
PCO150-37S PCO Tank[1] 150 gal. CLD 23 MLTPL
PCO150-37W PCO Tank[1] 150 gal. CLD 23 MLTPL
PCO200-37S PCO Tank[1] 200 gal. CLD 23 MLTPL
PCO200-37W PCO Tank[1] 200 gal. CLD 23 MLTPL
PCO300-37S PCO Tank[1] 300 gal. CLD 23 MLTPL
PCO300-37W PCO Tank[1] 300 gal. CLD 23 MLTPL
PU0200-52 Pickup Tank[1] 200 gal. CLD 23 MLTPL
PU0205-52 Pickup Tank[1] 205 gal. CLD 23 MLTPL
PU0305-60 Pickup Tank[1] 305 gal. CLD 23 MLTPL
PU0350-62 Pickup Tank[1] 350 gal. CLD 23 MLTPL
PU0450-62 Pickup Tank[1] 450 gal. CLD 23 MLTPL
SB00025 Spot Sprayer[1] 25 gal. CLD 23 MLTPL
SB00060 Spot Sprayer[1] 60 gal. CLD 23 MLTPL
SB0015 Spot Sprayer[1] 15 gal. CLD 23 MLTPL
SB0030 Spot Sprayer[1] 30 gal. CLD 23 MLTPL
SP-0012RT Applicator Tank[1] 12 gal. CLD 23 MLTPL
SP-0012VM Applicator Tank[1] 12 gal. CLD 23 MLTPL
SP-0019-VM Applicator Tank[1] 19 gal. CLD 23 MLTPL
SP-0020-LC Applicator Tank[1] 20 gal. CLD 23 MLTPL
SP0003-RT Specialty Tank[1] 3 gal. CLD 23 MLTPL
SP0004-SQ5 Specialty Tank[1] 4 gal. CLD 23 MLTPL
SP0004-SQ8 Specialty Tank[1] 4 gal. CLD 23 MLTPL
SP0005-RT Rectangle Tank[1] 5 gal. CLD 23 MLTPL
SP0005-SQ5 Specialty Tank[1] 5 gal. CLD 23 MLTPL
SP0005-SQ8 Specialty Tank[1] 5 gal. CLD 23 MLTPL
SP0006-2P Rectangle Tank[1] 6 gal. CLD 23 MLTPL
SP0006-5N Rectangle Tank[1] 6 gal. CLD 23 MLTPL
SP0007-RT Rectangle Tank[1] 7 gal. CLD 23 MLTPL
SP0008-VM Applicator Tank[1] 8 gal. CLD 23 MLTPL
SP0010-SQ8 Specialty Tank[1] 10 gal. CLD 23 MLTPL
SP0015-SQ Specialty Tank [1] 15 gal. CLD 23 MLTPL
SP0016-MM Rectangle Tank[1] 16 gal. CLD 23 MLTPL
SP002.5-RT Specialty Tank[1] 2.5 gal. CLD 23 MLTPL
SP002.8-RT Rectangle Tank – Flat Bottom[1] 2.8 gal. CLD 23 MLTPL
SP0020-OM Rectangle Tank[1] 20 gal. CLD 23 MLTPL
SP0026-RT Utility Tank[1] 26 gal. CLD 23 MLTPL
SP003.5-CL Specialty Tank[1] 3.5 gal. CLD 23 MLTPL
SP0035-RT Total Drain Rectangular Tank[1] 35 gal. CLD 23 MLTPL
SP0045-AS Utility Tank[1] 45 gal. CLD 23 MLTPL
SP0050-RT Utility Tank[1] 50 gal. CLD 23 MLTPL
SP0055-MM Utility Tank[1] 55 gal. CLD 23 MLTPL
SP0056-RT Total Drain Rectangular Tank[1] 56 gal. CLD 23 MLTPL
SP0080-RT Utility Tank[1] 80 gal. CLD 23 MLTPL
SP0100-RT Utility Tank[1] 100 gal. CLD 23 MLTPL
SP01000-UT Utility Tank[1] 1000 gal. CLD 23 MLTPL
SP0150-RT Utility Tank[1] 150 gal. CLD 23 MLTPL
SP0200-RT Utility Tank[1] 200 gal. CLD 23 MLTPL
SP0250-UT Utility Tank[1] 250 gal. CLD 23 MLTPL
SP0300-UT Utility Tank[1] 300 gal. CLD 23 MLTPL
SP0400-UT Utility Tank[1] 400 gal. CLD 23 MLTPL
SP0500-UT Utility Tank[1] 500 gal. CLD 23 MLTPL
SP0750-UT Utility Tank[1] 750 gal. CLD 23 MLTPL
SPBM0016-MM[1] 16 gal. CLD 23 MLTPL
SPBM002.5-RT Specialty Tank[1] 2.5 gal. CLD 23 MLTPL
SPBM003-RT Specialty Tank[1] 3 gal. CLD 23 MLTPL
SPBM04-SQ5 Specialty Tank[1] 4 gal. CLD 23 MLTPL
SPBM04-SQ7 Specialty Tank[1] 4 gal. CLD 23 MLTPL
SPBM04-SQ8 Specialty Tank[1] 4 gal. CLD 23 MLTPL
SPBM05-SQ5 Specialty Tank[1] 5 gal. CLD 23 MLTPL
SPBM05-SQ7 Specialty Tank[1] 5 gal. CLD 23 MLTPL
SPBM05-SQ8 Specialty Tank[1] 5 gal. CLD 23 MLTPL
SSPU0200-70 Pickup Tank [1] 200 gal. CLD 23 MLTPL
SSPU0300-70 Pickup Tank [1] 300 gal. CLD 23 MLTPL
SSPU0400-70 Pickup Tank [1] 400 gal. CLD 23 MLTPL
VT0010-12 Vertical Polyethylene Storage Tank[2] [3] 10 gal. CLD 23 PE
VT0020-16 Vertical Polyethylene Storage Tank[2] [3] 20 gal. CLD 23 PE
VT0025-18 Vertical Polyethylene Storage Tank[2] [3] 25 gal. CLD 23 PE
VT0040-18 Vertical Polyethylene Storage Tank[2] [3] 40 gal. CLD 23 PE
VT0055-20 Vertical Polyethylene Storage Tank[2] [3] 55 gal. CLD 23 PE
VT0055-23 Batch Tank- Vertical[1] 55 gal. CLD 23 MLTPL
VT0065-23 Vertical Polyethylene Storage Tank[2] [3] 65 gal. CLD 23 PE
VT0075-23 Vertical Polyethylene Storage Tank[2] [3] 75 gal. CLD 23 PE
VT0100-23 Batch Tank- Vertical[1] 100 gal. CLD 23 MLTPL
VT0100-28 Vertical Polyethylene Storage Tank[2] [3] 100 gal. CLD 23 PE
VT0105-23 Vertical Polyethylene Storage Tank[2] [3] 100 gal. CLD 23 PE
VT0110-32 Vertical Polyethylene Storage Tank[2] [3] 110 gal. CLD 23 PE
VT0130-32 Vertical Polyethylene Storage Tank[2] [3] 130 gal. CLD 23 PE
VT0135-28 Vertical Polyethylene Storage Tank[2] [3] 135 gal. CLD 23 PE
VT0145-36 Batch Tank- Vertical[1] 145 gal. CLD 23 MLTPL
VT0160-28 Vertical Polyethylene Storage Tank[2] [3] 160 gal. CLD 23 PE
VT0175-31 Vertical Polyethylene Storage Tank[2] [3] 160 gal. CLD 23 PE
VT0180-40 Vertical Polyethylene Storage Tank[2] [3] 180 gal. CLD 23 PE
VT0200-36 Batch Tank- Vertical[1] 200 gal. CLD 23 MLTPL
VT0210-40 Vertical Polyethylene Storage Tank[2] [3] 210 gal. CLD 23 PE
VT0225-31 Vertical Polyethylene Storage Tank[2] [3] 225 gal. CLD 23 PE
VT0250-36 Batch Tank- Vertical[1] 250 gal. CLD 23 MLTPL
VT0265-31 Vertical Polyethylene Storage Tank[2] [3] 265 gal. CLD 23 PE
VT0295-42 Vertical Polyethylene Storage Tank[2] [3] 2635 gal. CLD 23 PE
VT0300-35 Vertical Polyethylene Storage Tank[2] [3] 300 gal. CLD 23 PE
VT0300-42 Vertical Polyethylene Storage Tank[2] [3] 300 gal. CLD 23 PE
VT0325-36 Batch Tank- Vertical[1] 325 gal. CLD 23 MLTPL
VT0405-52 Vertical Polyethylene Storage Tank[2] [3] 405 gal. CLD 23 PE
VT0420-42 Vertical Polyethylene Storage Tank[2] [3] 420 gal. CLD 23 PE
VT0425-42 Vertical Polyethylene Storage Tank[2] [3] 425 gal. CLD 23 PE
VT0500-52 Vertical Polyethylene Storage Tank[2] [3] 500 gal. CLD 23 PE
VT0505-46 Vertical Polyethylene Storage Tank[2] [3] 505 gal. CLD 23 PE
VT0550-52 Vertical Polyethylene Storage Tank[2] [3] 550 gal. CLD 23 PE
VT0600-46 Vertical Polyethylene Storage Tank[2] [3] 600 gal. CLD 23 PE
VT0625-64 Vertical Polyethylene Storage Tank[2] [3] 625 gal. CLD 23 PE
VT0800-46 Vertical Polyethylene Storage Tank[2] [3] 800 gal. CLD 23 PE
VT0850-54 Vertical Polyethylene Storage Tank[2] [3] 850 gal. CLD 23 PE
VT0900-46 Vertical Polyethylene Storage Tank[2] [3] 900 gal. CLD 23 PE
VT1000-64 Vertical Polyethylene Storage Tank[2] [3] 1000 gal. CLD 23 PE
VT1050-86 Vertical Polyethylene Storage Tank[2] [3] 1050 gal. CLD 23 PE
VT10500-142 Vertical Tank [1] 10500 gal. CLD 23 MLTPL
VT10500-2500 Vertical Polyethylene Storage Tank[2] [3] 10,500 gal. CLD 23 PE
VT10500-2800 Vertical Polyethylene Storage Tank[2] [3] 10,500 gal. CLD 23 PE
VT1200-64 Vertical Polyethylene Storage Tank[2] [3] 1200 gal. CLD 23 PE
VT12500-142 Vertical Tank [1] 12500 gal. CLD 23 MLTPL
VT12500-142 Vertical Polyethylene Storage Tank[2] [3] 12,500 gal. CLD 23 PE
VT1350-86 Vertical Polyethylene Storage Tank[2] [3] 1350 gal. CLD 23 PE
VT1500-64 Vertical Polyethylene Storage Tank[2] [3] 1500 gal. CLD 23 PE
VT1500-86 Vertical Polyethylene Storage Tank[2] [3] 1500 gal. CLD 23 PE
VT1525-64 Vertical Polyethylene Storage Tank[2] [3] 1525 gal. CLD 23 PE
VT15500-142 Vertical Tank [1] 15500 gal. CLD 23 MLTPL
VT1650-86 Vertical Polyethylene Storage Tank[2] [3] 1650 gal. CLD 23 PE
VT2000-64 Vertical Polyethylene Storage Tank[2] [3] 2000 gal. CLD 23 PE
VT2000-90 Vertical Polyethylene Storage Tank[2] [3] 2000 gal. CLD 23 PE
VT2050-86 Vertical Polyethylene Storage Tank[2] [3] 2050 gal. CLD 23 PE
VT2150-102 Vertical Polyethylene Storage Tank[2] [3] 2150 gal. CLD 23 PE
VT2500-90 Vertical Polyethylene Storage Tank[2] [3] 2500 gal. CLD 23 PE
VT2500-96 Vertical Tank [1] 2500 gal. CLD 23 MLTPL
VT3000-90 Vertical Polyethylene Storage Tank[2] [3] 3000 gal. CLD 23 PE
VT3000-96 Vertical Tank [1] 3000 gal. CLD 23 MLTPL
VT3100-102 Vertical Polyethylene Storage Tank[2] [3] 3100 gal. CLD 23 PE
VT3400-102 Vertical Polyethylene Storage Tank[2] [3] 3400 gal. CLD 23 PE
VT4000-96 Vertical Polyethylene Storage Tank[2] [3] 4000 gal. CLD 23 PE
VT4200-96 Vertical Polyethylene Storage Tank[2] [3] 4200 gal. CLD 23 PE
VT4995-142 Vertical Tank[1] 4995 gal. CLD 23 MLTPL
VT5000-102 Vertical Polyethylene Storage Tank[2] [3] 5000 gal. CLD 23 PE
VT5150-102 Vertical Polyethylene Storage Tank[2] [3] 5150 gal. CLD 23 PE
VT6250-102 Vertical Polyethylene Storage Tank[2] [3] 6250 gal. CLD 23 PE
VT6500-120 Vertical Polyethylene Storage Tank[2] [3] 6500 gal. CLD 23 PE
VT7000-142 Vertical Polyethylene Storage Tank[2] [3] 7000 gal. CLD 23 PE
VT7800-120 Vertical Polyethylene Storage Tank[2] [3] 7800 gal. CLD 23 PE
VT8000-120 Vertical Polyethylene Storage Tank[2] [3] 8000 gal. CLD 23 PE
VT9000-142 Vertical Tank [1] 9000 gal. CLD 23 MLTPL
VT9150-120 Vertical Polyethylene Storage Tank[2] [3] 9150 gal. CLD 23 PE
VT9500-120 Vertical Polyethylene Storage Tank[2] [3] 9500 gal. CLD 23 PE
WO2500-VT Water Only Tank[1] 2500 gal. CLD 23 MLTPL
WO3000-VT Water Only Tank[1] 3000 gal. CLD 23 MLTPL

[1] Certified for the following tank/component combinations:
    3/4" fittings/fitting gaskets shall only be used with tanks greater than or equal to 2.5
    gallons.
    1" fittings/fitting gaskets shall only be used with tanks greater than or equal to 3
    gallons.
    1-1/4" and 1-1/2" fittings/fitting gaskets shall only be used with tanks greater than or
    equal to 4 gallons.
    2" fittings/fitting gaskets shall only be used with tanks greater than or equal to 5
    gallons.
    3" fittings/fitting gaskets shall only be used with tanks greater than or equal to 95
    gallons.
    Siphon tubes shall only be used with tanks greater than or equal to 5 gallons.
[2] Certified for Vertical Tank (VT) and Double Walled (DW) shells that are black, blue,
    green, or natural.
[3] Certified for cistern tank shells that are blue.
[4] Certification for the Double Walled (DW) Vertical Tanks does not include the optional
    fitting system



 
Aclarus Inc. 
1901 Fisher Drive
Peterborough, ON K9J 6X6 
Canada 
888-405-8801 
705-775-8695
Visit this company's website


Facility : Peterborough, Ontario, Canada

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Chemical Generators[1] [2]
AOWT-5 [3] CLD 23 MLTPL
AOWT-8 [3] CLD 23 MLTPL
AOWT-15 [3] CLD 23 MLTPL
AOWT-20 [3] CLD 23 MLTPL
AOWT-30 [3] CLD 23 MLTPL
AOWT-45 [3] CLD 23 MLTPL
AOWT-60 [3] CLD 23 MLTPL

[1] This product is Certified for point-of-entry applications. This product is not Certified
    for point of use applications.
[2] Certification of this product has been performed to the health effects requirements of
    NSF/ANSI Standard 61, which assesses the acceptability of potential extractants from the
    chemical generator. No evaluation shall be performed on the strength or efficacy of the
    chemical(s) generated. As unit operation, maintenance and the consistency of source
    ingredients may affect the performance of the unit, the ensuing chemical(s) is not
    certified by NSF to NSF/ANSI Standard 60.
[3] The number in the trade name refers to the flow capacity in gallons per minute (gpm)
    +/-5.



 
ACPP Custom Plumbing Parts, ULC 
10037-96 Avenue
Westlock, AB T7P-2P9 
Canada 
780-349-6511


Facility : Westlock, Alberta, Canada

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Manifolds
Copper Manifolds [1] C. HOT CU

[1] The following part numbers, configurations and sizes are Certified.  All manifolds are
    72" long (unless otherwise noted) and may be cut to the desired length.
    
    Copper Manifolds with Copper Ports:
    
    Pipe run 1", 1 1/4", 1 1/2" or 2" with 24 1/2", 3/4", or 1" copper outlets on 3" CTRS.
    
    CC1005024 1 X 1/2 CU
    CC1255024 1 1/4 X 1/2 CU
    CC1251024 1 1/4 X 1 CU
    CC1505024 1 1/2 X 1/2 CU
    CC1501024 1 1/2 X 1 CU
    CC2005024 2 X 1/2 CU
    CC1007524 1 X 3/4 CU
    CC1257524 1 1/4 X 3/4 CU
    CC1507524 1 1/2 X 3/4 CU
    CC2007524 2 X 3/4 CU
    CC2001024 2 X 1 CU
    
    Pipe run 1", 1 1/4", 1 1/2" or 2" with 18 1/2", 3/4", or 1" copper outlets on 4" CTRS
    
    CC1005018 1 X 1/2 CU
    CC1255018 1 1/4 X 1/2 CU
    CC1505018 1 1/2 X 1/2 CU
    CC2005018 2 X 1/2 CU
    CC1007518 1 X 3/4 CU
    CC1257518 1 1/4 X 3/4 CU
    CC1507518 1 1/2 X 3/4 CU
    CC2007518 2 X 3/4 CU
    CC1251018 1 1/4 X 1 CU
    CC1501018 1 1/2 X 1 CU
    CC2001018 2 X 1 CU
    
    Pipe run 1", 1 1/4", 1 1/2" or 2" with 12 1/2", 3/4", or 1" copper outlets on 6" CTRS.
    
    CC1005012ER 1 X 1/2 CU
    CC1255012ER 1 1/4 X 1/2 CU
    CC1505012ER 1 1/2 X 1/2 CU
    CC2005012ER 2 X 1/2 CU
    CC1007512ER 1 X 3/4 CU
    CC1257512ER 1 1/4 X 3/4 CU
    CC1507512ER 1 1/2 X 3/4 CU
    CC2007512ER 2 X 3/4 CU
    CC1251012ER 1 1/4 X 1 CU
    CC1501012ER 1 1/2 X 1 CU
    CC2001012ER 2 X 1 CU
    
    Pipe run 62" long, 1" with 30 1/2" copper outlets on 2" CTRS.
    
    CC1005030 1 X 1/2 CU
    
    Compact Headers - Pipe run 1" with 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, or 12 1/2" copper
    outlets on 1 1/2" CTRS.
    
    CC1005002 1 X 1/2 CU
    CC1005003 1 X 1/2 CU
    CC1005004 1 X 1/2 CU
    CC1005005 1 X 1/2 CU
    CC1005006 1 X 1/2 CU
    CC1005007 1 X 1/2 CU
    CC1005008 1 X 1/2 CU
    CC1005009 1 X 1/2 CU
    CC1005010 1 X 1/2 CU
    CC1005011 1 X 1/2 CU
    CC1005012 1 X 1/2 CU
    
    Speedy Copper Headers - closed one end and reduced 3/4" female sweat the other end.
    
    SC1005002RC 1 X 1/2 CU
    SC1005003RC 1 X 1/2 CU
    SC1005004RC 1 X 1/2 CU
    SC1005005RC 1 X 1/2 CU
    SC1005006RC 1 X 1/2 CU
    SC1005007RC 1 X 1/2 CU
    SC1005008RC 1 X 1/2 CU
    SC1005009RC 1 X 1/2 CU
    SC1005010RC 1 X 1/2 CU
    SC1005011RC 1 X 1/2 CU
    SC1005012RC 1 X 1/2 CU
    
    Speedy Copper Headers - closed one end and 1" plain the other end.
    
    SC1005002PL 1 X 1/2 CU
    SC1005003PL 1 X 1/2 CU
    SC1005004PL 1 X 1/2 CU
    SC1005005PL 1 X 1/2 CU
    SC1005006PL 1 X 1/2 CU
    SC1005007PL 1 X 1/2 CU
    SC1005008PL 1 X 1/2 CU
    SC1005009PL 1 X 1/2 CU
    SC1005010PL 1 X 1/2 CU
    SC1005011PL 1 X 1/2 CU
    SC1005012PL 1 X 1/2 CU
    
    Copper Manifolds with PEX Valves:
    
    Type L Copper Manifold with a Lead Free PEX Valve
    1", 1 1/4", 1 1/2", and 2" Copper Headers with 1/2" Lead Free PEX Valves on 3" Center
    
    CX1005024V-LF 1" x 1/2" Copper outlets with a 1/2" Lead free PEX Valve
    CX1255024V-LF 1 1/4" x 1/2" Copper outlets with a 1/2" Lead free PEX Valve
    CX1505024V-LF 1 1/2" x 1/2" Copper outlets with a 1/2" Lead free PEX Valve
    CX2005024V-LF 2" x 1/2" Copper outlets with a 1/2" Lead free PEX Valve
    
    1" or 1 1/4" Copper Header with 2-12 1/2" Lead Free PEX Valves on 2" Centers
    CVP1005002-LF
    CVP1005003-LF
    CVP1005004-LF
    CVP1005005-LF
    CVP1005006-LF
    CVP1005007-LF
    CVP1005008-LF
    CVP1005009-LF
    CVP1005010-LF
    CVP1005011-LF
    CVP1005012-LF
    CVP1255002-LF
    CVP1255002-LF
    CVP1255003-LF
    CVP1255004-LF
    CVP1255005-LF
    CVP1255006-LF
    CVP1255007-LF
    CVP1255008-LF
    CVP1255009-LF
    CVP1255010-LF
    CVP1255011-LF
    CVP1255012-LF
    



 
ActCarb Technology Co., Ltd. 
1F., No. 620, Fengping 1st Road
Daliao District, Kaohsiung City 831 
Taiwan 
886 919519379
Visit this company's website


Facility : Shanxi, China

Process Media

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Granular Activated Carbon[1]
ACTIVATED CARBON [2] CLD 23 GAC

[1] The carbon source is bituminous coal.
[2] Certified for the following Mesh Sizes: 8 x 30, 4 x 8, 12 x 40, 3 x 6, 4 x 8, 8 x 12, 8
    x 16, 8 x 20, 8 x 24, 8 x 28, 8 x 30, 20 x 30, 20 x 40, 20 x 50, 30 x 40, 30 x 50, 30 x
    60, 30 x 80, 30 x 100, 10 x 25, 10 x 30, 12 x 20, 12 x 25, 12 x 30, 12 x 35, 200, 325.

Powdered Activated Carbon[1] [3]
ACTIVATED CARBON 325 mesh CLD 23 PAC

[1] The carbon source is bituminous coal.
[3] This product is certified for a maximum use level of 250 mg/L.

NOTE: Certified for water treatment plant applications.
      This product has not been evaluated for point of use applications.


 
Action Technology 
10610 State Highway 10
Clinton, IL 61727 
United States 
217-935-1066


Facility : Clinton, IL

Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Tubing/Hose
AT Alpha PE Series .17" - .5" D. HOT PE



 
Activated Carbon Innovation UK Ltd. 
1, Nottingham Science Park
Jesse Boot Avenue 
Nottingham NG7 2RU 
United Kingdom 
44 115 896 8000
Visit this company's website


Facility : Nottingham, UK

Process Media

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Granular Activated Carbon[1]
RX105AR-1240M 12 x 40 mesh CLD 23 GAC
RX105AR-816M 8 x 16 mesh CLD 23 GAC
RX105AR-820M 8 x 20 mesh CLD 23 GAC
RX105AR-830M 8 x 30 mesh CLD 23 GAC
RX105AW-1240M 12 x 40 mesh CLD 23 GAC
RX105AW-816M 8 x 16 mesh CLD 23 GAC
RX105AW-820M 8 x 20 mesh CLD 23 GAC
RX105AW-830M 8 x 30 mesh CLD 23 GAC
RX105W-1240M 12 x 40 mesh CLD 23 GAC
RX105W-816M 8 x 16 mesh CLD 23 GAC
RX105W-820M 8 x 20 mesh CLD 23 GAC
RX105W-830M 8 x 30 mesh CLD 23 GAC
RX110AR-1240M 12 x 40 mesh CLD 23 GAC
RX110AR-816M 8 x 16 mesh CLD 23 GAC
RX110AR-830M 8 x 30 mesh CLD 23 GAC
RX110AW-1240M 12 x 40 mesh CLD 23 GAC
RX110AW-816M 8 x 16 mesh CLD 23 GAC
RX110AW-820M 8 x 20 mesh CLD 23 GAC
RX110AW-830M 8 x 30 mesh CLD 23 GAC
RX110W-1240M 12 x 40 mesh CLD 23 GAC
RX110W-816M 8 x 16 mesh CLD 23 GAC
RX110W-820M 8 x 20 mesh CLD 23 GAC
RX110W-830M 8 x 30 mesh CLD 23 GAC
RX115AR-1240M 12 x 40 mesh CLD 23 GAC
RX115AR-816M 8 x 16 mesh CLD 23 GAC
RX115AR-830M 8 x 30 mesh CLD 23 GAC
RX115AW-1240M 12 x 40 mesh CLD 23 GAC
RX115AW-816M 8 x 16 mesh CLD 23 GAC
RX115AW-820M 8 x 20 mesh CLD 23 GAC
RX115AW-830M 8 x 30 mesh CLD 23 GAC
RX115W-1240M 12 x 40 mesh CLD 23 GAC
RX115W-816M 8 x 16 mesh CLD 23 GAC
RX115W-820M 8 x 20 mesh CLD 23 GAC
RX115W-830M 8 x 30 mesh CLD 23 GAC
RX120AR-1240M 12 x 40 mesh CLD 23 GAC
RX120AR-816M 8 x 16 mesh CLD 23 GAC
RX120AR-830M 8 x 30 mesh CLD 23 GAC
RX120AW-1240M 12 x 40 mesh CLD 23 GAC
RX120AW-816M 8 x 16 mesh CLD 23 GAC
RX120AW-820M 8 x 20 mesh CLD 23 GAC
RX120AW-830M 8 x 30 mesh CLD 23 GAC
RX120W-1240M 12 x 40 mesh CLD 23 GAC
RX120W-816M 8 x 16 mesh CLD 23 GAC
RX120W-820M 8 x 20 mesh CLD 23 GAC
RX120W-830M 8 x 30 mesh CLD 23 GAC

[1] The carbon source is Bituminous coal.

NOTE: Certified for water treatment plant applications.
      This product has not been evaluated for point of use applications.


 
Activcarb 
SF No. 270/ 1, Chinnaputhur
Dharapuram, Dist Erode 
Tamil Nadu 638657 
India 
91 999 4063307


Facility : Tamil Nadu, India

Process Media

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Granular Activated Carbon[1]
Acb100 [2] CLD 23 GAC
Acb40 [2] CLD 23 GAC
Acb45 [2] CLD 23 GAC
Acb50 [2] CLD 23 GAC
Acb55 [2] CLD 23 GAC
Acb60 [2] CLD 23 GAC
Acb65 [2] CLD 23 GAC
Acb70 [2] CLD 23 GAC
Acb75 [2] CLD 23 GAC
Acb80 [2] CLD 23 GAC
Acb85 [2] CLD 23 GAC
Acb90 [2] CLD 23 GAC
Acb95 [2] CLD 23 GAC

[1] The carbon source is coconut shell.
[2] Certified for the following mesh sizes: 3x6, 3x30, 6x8, 4x8, 6x12, 6x16, 8x16, 8x20,
    8x30, 12x30, 12x40, 14x25, 16x35, 16x40, 18x35, 18x40, 20x40, 20x50, 20x60, 20x70,
    30x50, 30x60, 30x70, 30x80, 35x60, 35x70 and 40x80.

Powdered Activated Carbon[1]
Acb1000 [3] CLD 23 PAC
Acb1050 [3] CLD 23 PAC
Acb1100 [3] CLD 23 PAC
Acb1150 [3] CLD 23 PAC
Acb1200 [3] CLD 23 PAC
Acb1250 [3] CLD 23 PAC
Acb1300 [3] CLD 23 PAC
Acb1350 [3] CLD 23 PAC
Acb1400 [3] CLD 23 PAC
Acb1450 [3] CLD 23 PAC
Acb1500 [3] CLD 23 PAC
Acb950 [3] CLD 23 PAC

[1] The carbon source is coconut shell.
[3] Certified for the following mesh sizes: 40x140, 50x140, 50x200, 80x140, 80x200, 80x325,
    100x325, -200 and -325.

NOTE: Certified for water treatment plant applications.
      This product has not been evaluated for point of use applications.


 
ADA Carbon Solutions, LLC 
1460 West Canal Court
Suite 100 
Littleton, CO 80120 
United States 
888-822-8617 
303-962-1977
Visit this company's website


Facility : # 1 USA

Process Media

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Granular Activated Carbon
PowerGAC[1] [2] [3] CLD 23 GAC

[1] The carbon source is coal, wood, and/or coconut.
[2] Trade names may include letters and/or numbers to designate any or all of the following:
    mesh size, customer, market, processing methods, intended applications, activity level,
    special testing, or other customer or product specific differentiators.
[3] Certified for the following mesh sizes: 8x16, 8x20, 8x30, 10x20, 12x40, 20x40, 20x50,
    30x60, 30x200, 80x325.

Powdered Activated Carbon
PowerPAC H20® Plus[1] [2] -325 mesh CLD 23 PAC
PowerPAC H2O®[1] [2] -325 mesh CLD 23 PAC

[1] The carbon source is coal, wood, and/or coconut.
[2] Trade names may include letters and/or numbers to designate any or all of the following:
    mesh size, customer, market, processing methods, intended applications, activity level,
    special testing, or other customer or product specific differentiators.

NOTE: Certified for water treatment plant applications.
      This product has not been evaluated for point of use applications.


Facility : # 2 USA

Process Media

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Granular Activated Carbon[1] [2]
PowerGAC [3] CLD 23 GAC

[1] The carbon source is coal, wood and/or coconut.
[2] Trade names may include letters and/or numbers to designate any or all of the following:
    mesh size, customer, market, processing methods, intended applications, activity level,
    special testing, or other customer or product specific differentiators.
[3] Certified for the following mesh sizes: >4, 4x8, 8x16, 8x20, 8x30, 10x20, 12x40, 20x40,
    20x50, 30x60, 30x200, 80x325.

Powdered Activated Carbon[1] [2]
PowerPAC H20® -325 mesh CLD 23 PAC
PowerPAC H20® Plus -325 mesh CLD 23 PAC

[1] The carbon source is coal, wood and/or coconut.
[2] Trade names may include letters and/or numbers to designate any or all of the following:
    mesh size, customer, market, processing methods, intended applications, activity level,
    special testing, or other customer or product specific differentiators.

NOTE: Certified for water treatment plant applications.
      This product has not been evaluated for point of use applications.


 
AdEdge Technologies, Inc. 
5152 Belle Wood Court
Suites A 
Burford, GA 30518 
United States 
678-835-0052


Facility : Quincy, IL

Process Media

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Oxidative Media
AD26 [1] CLD 23 MNDOX

[1] Certified for the following mesh sizes: 8 x 20, 20 x 40.

NOTE: Certified for water treatment plant applications.
      This product has not been evaluated for point of use applications.


 
Adeka Corporation 
7-2-35 Higashiogu
Arakawa-ku, Toyko, 116-8554 
Japan 
81 3 4455 2843
Visit this company's website


Facility : Ibaraki, Japan

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Gasket/Sealing Materials
ADEKAULTRASEAL MC-2010MN [1] CLD 23 IR

[1] Certified for a maximum surface area to volume ratio not to exceed 0.13 sq. in./L.



 
Adept Fluidyne Pvt. Ltd. 
Plot 4, S No. 17/1 - B, Kothrud
Industrial Estate, Pune 
Maharashtra 411 038 
India 
91 202 5464551
Visit this company's website


Facility : Pune, Maharashtra, India

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Water Meters
MagFlow 6410 PP 25 mm - 500 mm CLD 23 MLTPL



 
Adhesive R&D, Inc. 
4603 Anderson Drive
Eau Claire, WI 54703 
United States 
715-832-4557
Visit this company's website


Facility : Eau Claire, WI

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Thread Compounds
DFM 555 [1] CLD 23 SLT
DFM 63 [1] CLD 23 SLT
DFM 64 [1] CLD 23 SLT
DFM 65 [1] CLD 23 SLT
DFM 66 [1] CLD 23 SLT
DFM 67 [1] CLD 23 SLT
DFM 68 [1] CLD 23 SLT
FMB64 [1] CLD 23 SLT
FMB65 [1] CLD 23 SLT
FMB66 [1] CLD 23 SLT
RubberMAX iPipe 70 [1] CLD 23 SLT
RubberMAX iPipe 71 [1] CLD 23 SLT
RubberMAX iPipe 72 [1] CLD 23 SLT
RubberMAX iPipe 73 [1] CLD 23 SLT

[1] Certified for a maximum of 18.5 joints per liter.



 
Adhesives Technology Corp. 
450 East Copans Road
Pompano Beach, FL 33064 
United States 
954-461-2335


Facility : # 2 Germany

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Adhesives
ULTRABOND ACRYL-8CC [1] D. HOT VE
ULTRABOND HYB-2CC [1] C. HOT PUR

[1] Certified for use as an anchoring adhesive for installing thread rods (less than or
    equal to 1.3 inches in diameter) in concrete or masonry for water treatment applications.

NOTE: Only products bearing the NSF Mark on the products, product packaging, and/or
      documentation shipped with the product are certified.


Adhesives Technology Corp. (ATC) 
450 East Copans Road
Pompano Beach, FL 33064 
United States 
800-892-1880 
Visit this company's website


Facility : # 1 Germany

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Adhesives
ULTRABOND 365CC 13.2 fl. oz. [1] C. HOT VE
ULTRABOND 365CC 19.8 fl. oz. [1] C. HOT VE

[1] Certified for use as an anchoring adhesive for installing threaded rods (less than or
    equal to 6 mm - 36 mm or 1/4" - 1-3/8" in diameter) in concrete for water treatment
    applications.



 
Adolf Würth GmbH & Co. KG 
Produktmanagement Chemie, Postfach
74650 Künzelsau 
Germany 
49 794 015 2007


Facility : # 1 Switzerland

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Adhesives
Würth® DOS Lagersicherung hochfest (0893 603) >= 1/2" C. HOT ADH
Würth® DOS Flächendicht orange (0893 574) >= 1/2" C. HOT ADH
Würth® DOS Klebfix EASY PEN (0893 090) >= 1/2" CLD 23 ADH
Würth® DOS Klebfix (0893 09) >= 1/2" CLD 23 ADH
Würth® DOS Schraubensicherung Hochfest >= 1/2" C. HOT ADH
Würth® DOS Schraubensicherung Mittelfest >= 1/2" C. HOT ADH
Würth Rohrdicht PLUS (0893 577 300) >= 1/2" C. HOT ADH

Sealants
Würth® DOS Flächendicht grün (0893 573) >= 1/2" C. HOT SLT

Thread Compounds
Würth® DOS Rohrdicht mit PTFE >= 1/2" C. HOT TC
Würth® DOS Rohrdicht[1] >= 1/2" C. HOT TC
Würth® DOS Schraubensicherung Hochfest >= 1/2" C. HOT TC

[1] Certification is based on a minimum cure of 72 hours at 75°F.



 
Adolf Würth GmbH & Co. KG 
Reinhold-Würth-Str. 12-16
74653 Künzelsau-Gaisbach 
Germany 
49 7940 15 0


Facility : # 2 Germany

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Adhesives
Atrion AVM TOP QUATTRO [1] D. HOT VE
WIT-PE 1000 [1] D. HOT EPOXY
WIT-PE 500 [1] D. HOT EPOXY
WIT-UH 300 [1] C. HOT PUR
WIT-VH 300 [1] C. HOT PUR
WIT-VM 250 [1] D. HOT VE
WIT-VM 300 [1] C. HOT PUR

[1] Certified for use as an anchoring adhesive for installing thread rods (less than or
    equal to 1.3 inches in diameter) in concrete or masonry for water treatment applications.

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.


 
Adolf Würth GmbH & Co. KG 
Reinhold-Würth-Strasse 12-17
D-74650 Künzelsau, Baden-Wurttemberg 
Germany 
49 7940150
Visit this company's website


Facility : # 1 Germany

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Sealants[G]
SILICONE ACETATE, FOOD GRADE / ACETATSILIKON LEBENSMITTEL >= 1/2" CLD 23 SLT

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Advance Products & Systems 
108 Asset Avenue
Scott, LA 70583 
United States 
800-315-6009 
337-233-6116
Visit this company's website
SG11DXXXX[3]       SG12AXXXX[3]       SG12BXXXX[3]       SG12CXXXX[3]       SG12DXXXX[3]       SG14CXXXX[3]       SG9AXXXX[3]       SG9BXXXX[3]      
[1] Certified for a maximum length of 24 inches (610 mm) and an inside diameter of 0.31
    inches (8 mm).
[2] Certified for a maximum length of 12 inches (305 mm) and an inside diameter of 0.31
    inches (8 mm).
[3] Certified for a maximum surface area to volume ratio of 50 sq. in./L, or 1,200 mm of
    0.35 inch diameter tubing.
    A    - denotes both of the two ends are hexagonal nut (SG01).
    B    - denotes that one end is hexagonal nut (SG01), the other end is tie-in (SG04).
    C    - denotes both ends are round nuts (SG01).
    D    - denotes that one end is round nut (SG02), the other end is tie-in (SG04).
    XXXX - denotes length in millimeters from:
           100 to 1563mm for SG11 models (7.5mm I.D.)
           100 to 1466mm for SG12 models (8mm I.D.)
           100 to 1200mm for SG14 model (9.2mm I.D.)
           200 to 1800mm for SG9A models (6.5mm I.D.)
           250 to 1800mm for SG9B models (6.5mm I.D.)

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Zhuhai Mingshi Ceramics Valve Co., Ltd. 
No. 25, Xianggong Road
Hongwan Industrial Zone 
XiangZhou, Zhuhai, Guangdong 519060 
China 
86 756 851 5168


Facility : Zhuhai, Guangdong, China

Mechanical Plumbing Devices

Trade Designation      

Faucet Cartridges[G]
D25G-6      
D25P-1      
D25P-1 Ceramic Disc Sealing Cartridge      
D25P-6      
D30G-1      
D30P-1      
D35G-10      
D35G-17      
D35G-28      
D35G-5D      
D35G-7      
D35G-7L      
D35G-8      
D35G-8 Ceramic Disc Sealing Cartridge      
D35P-1      
D35P-1 Ceramic Disc Sealing Cartridge      
D35P-17      
D35P-1L      
D35P-20      
D35P-20B      
D35P-20C      
D35P-20D      
D35P-20E      
D35P-28      
D35P-3      
D35P-5D      
D35P-7      
D35P-7L      
D40G-13B      
D40G-17      
D40G-22      
D40G-24      
D40G-28B      
D40G-5      
D40G-9      
D40G-9 Ceramic Disc Sealing Cartridge      
D40G-9B      
D40P-16B      
D40P-17      
D40P-22      
D40P-24      
D40P-28B      
D40P-4      
D40P-4 Ceramic Disc Sealing Cartridge      
D40P-5      
D40P-6      

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Zhuhai Workmate Motors Co., Ltd. 
9 Golden Lake Road
Golden Coast, Jinwan 
Zhuhai, Guangdong 519040 
China 
86 756 7615890


Facility : Guangdong, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Pressurized Water Storage Tanks
PT-CS-X[1] 2 - 40 gal. CLD 23 MLTPL
PT-SS-X[1] 2 - 40 gal. CLD 23 MLTPL

[1] X refers to the size in gallons.



 
Zhuji City Howhi Air Conditioners Made Co., Ltd. 
Jinling Industrial Zone
Ruanshi Town, Zhuji 
Zhejiang 311802 
China 
86 575 7698528
Visit this company's website


Facility : Zhuji, Zhejiang, China

Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings
100ANV-AB Coupling with Stop[G] 1/2" - 4" C. HOT MLTPL
101ANV-AB Coupling Reducer[G] 3/4"x1/2" - 4"x3" C. HOT MLTPL
102ANV-AB Bushing Reducer[G] 3/4"x1/2" - 4"x3" C. HOT MLTPL
103ANV-AB 90 Elbow[G] 1/2" - 4" C. HOT MLTPL
104ANV-AB 90 Street Elbow[G] 1/2" - 4" C. HOT MLTPL
104ANV-AL 90 Extended Street Elbow[G] 1/2" - 3/4" C. HOT MLTPL
107ANV-AB 45 Elbow[G] 1/2" - 4" C. HOT MLTPL
108ANV-AB 45 Street Elbow[G] 1/2" - 4" C. HOT MLTPL
111ANV-AB Coupling no Stop[G] 1/2" - 4" C. HOT MLTPL
111ANV-AL Extended Coupling no Stop[G] 1/2" - 2" C. HOT MLTPL
112ANV-AB Tee[G] 1/2" - 4" C. HOT MLTPL
113ANV-AB Tee[G] ¾"x¾"x½" - 4"x4"x3" C. HOT MLTPL
114ANV-AB Tee[G] ¾"x½"x½" - 4"x3"x3" C. HOT MLTPL
115ANV-AB Tee[G] ½"x½"x¾"-1"x1"x1"-¼" C. HOT MLTPL
137ANV-AB Cap[G] 1/2" - 4" C. HOT MLTPL
138ANV-AB Cross Over[G] 1/2" - 3/4" C. HOT MLTPL
148ANV-AB Street Cross Over[G] 1/2" - 3/4" C. HOT MLTPL
180 Return Bend (109EB) 3/8" - 2 1/8" D. HOT CU
301ANV-AB Male Adapter P x MPT[G] 1/2" x 3/8" - 4"x4" C. HOT MLTPL
302ANV-AB Female Adapter P x FPT[G] 1/2" x 3/8" - 4"x4" C. HOT MLTPL
303ANV-AB Male Street Adapter FTG x MPT[G] 1/2" x 3/8 "- 2"x2" C. HOT MLTPL
304ANV-AB Female Street Adapter FTG x FPT[G] 1/2" x 3/8" - 2"x2" C. HOT MLTPL
305ANV-AB Union P x P[G] 1/2" - 2" C. HOT MLTPL
306ANV-AB Union P x MPT[G] 1/2" - 2" C. HOT MLTPL
307ANV-AB Union P x F BSP[G] 1/2"x1" - 1"x1-1/4" C. HOT MLTPL
307ANV-AB Union P x FPT[G] 1/2" - 2" C. HOT MLTPL
308ANV-AB Union P x FPT[G] 1/2" - 2" C. HOT MLTPL
313ANV-AB Tee P x FPT x P[G] ½"x½"x½" - 2"x¾"x2" C. HOT MLTPL
313ANV-AB Vent Tee P x FPT x P[G] ½x1/8x½"-¾x1/8x¾" C. HOT MLTPL
313ANV-Tee P x P x FPT[G] ½"x½"x½" - 4"x4"x2" C. HOT MLTPL
314ANV-AB Male Elbow 90° P x MPT[G] 1/2"x3/8" - 2"x2" C. HOT MLTPL
315ANV-AB Female Elbow 90° P x FPT[G] 1/2"x3/8" - 2"x2" C. HOT MLTPL
325ANV1613AB 90° hi ear elbow P x FPT[G] 1/2" x 1/2" C. HOT MLTPL
326ANV-AB 90° drop ear elbow P x FPT[G] 1/2"x3/8"- 3/4"x3/4" C. HOT MLTPL
400ANV-AB Flange P - BP[G] 1" - 4" - 4" - 8" C. HOT MLTPL
Adapter - Female, C x F (122FA) 1/4" - 3 1/8" D. HOT CU
Adapter - Female, FTG x F (122FF) 3/8" - 2 1/8" D. HOT CU
Adapter - Male, C x M (121MA) 1/4" - 3 1/8" D. HOT CU
Adapter - Male, FTG x M (121MF) 1/4" - 3 1/8" D. HOT CU
Bushing - Fitting Reducer (102CP) 1/4" - 8 1/8" D. HOT CU
Cap (137CP) 1/4" - 4 1/8" D. HOT CU
Coupling - No Stop (100CN) 1/4" - 8 1/8" D. HOT CU
Coupling - Reducing (101CP) 1/4" - 8 1/8" D. HOT CU
Coupling - Rolled Stop (100CP) 1/4" - 8 1/8" D. HOT CU
Coupling - Staked Stop (100CS) 1/4" - 8 1/8" D. HOT CU
Elbow 45° (107EB) 1/4" - 8 5/8" D. HOT CU
Elbow 45° - Street (108EB) 1/4" - 8 5/8" D. HOT CU
Elbow 90° - Long Radius (105EB) 1/4" - 4 1/8" D. HOT CU
Elbow 90° - Long Radius Street (106EB) 1/4" - 4 1/8" D. HOT CU
Elbow 90° - Short Radius (103EB) 1/4" - 8 5/8" D. HOT CU
Elbow 90° - Short Radius Street (104EB) 1/4" - 8 5/8" D. HOT CU
Tee (112ST) 1/4" - 8 5/8" D. HOT CU
Tee - Reducing (113ST) 1/4" - 4 1/8" D. HOT CU
Tee - Reducing (114ST) 1/4" - 2 5/8" D. HOT CU
Tee - Reducing (115ST) 1/2" - 2 5/8" D. HOT CU

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Ziegler Chemical & Mineral Corp. 
600 Prospect Avenue
Piscataway, NJ 08854 
United States 
732-752-4111
Visit this company's website


Facility : Piscataway, NJ

Protective (Barrier) Materials

    Water Water
  Water Contact Contact Contact
Trade Designation Size Restriction Temp Material

Coatings - Fittings
Zeco AA-0336[1] >= 3" CLD 23 ASPH
Zeco AA-0344[1] >= 3" CLD 23 ASPH
Zeco AA-4108[2] >= 3" CLD 23 ASPH
Zeco AA-4109[2] >= 3" CLD 23 ASPH
Zeco AA-4117[2] >= 3" CLD 23 ASPH

[1] Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 3 dry
    Recoat Cure Time and Temerature: 7 days at 73°F
[2] Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 3
    Maximum Thinner: None
    Final Cure Time and Temperature: 7 days at 75°F

Coatings - Pipe
ZECO AA-4108[3] >= 3" CLD 23 ASPH
ZECO AA-4109[3] >= 3" CLD 23 ASPH
ZECO AA-4117[3] >= 3" CLD 23 ASPH
Zeco AA-0336[1] >= 3" CLD 23 ASPH
Zeco AA-0344[1] >= 3" CLD 23 ASPH

[1] Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 3 dry
    Recoat Cure Time and Temerature: 7 days at 73°F
[3] Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 3
    Recoat Cure Time and Temperature: 7 days at 75°F

Coatings - Tank
ZECO AA-4108[3] >= 1000 gal. CLD 23 ASPH
ZECO AA-4117[3] >= 1000 gal. CLD 23 ASPH
Zeco AA-0336[1] >= 1000 gal. CLD 23 ASPH
Zeco AA-0344[1] >= 1000 gal. CLD 23 ASPH

[1] Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 3 dry
    Recoat Cure Time and Temerature: 7 days at 73°F
[3] Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 3
    Recoat Cure Time and Temperature: 7 days at 75°F

Coatings - Valve
Zeco AA-0336[1] >= 3" CLD 23 ASPH
Zeco AA-0344[1] >= 3" CLD 23 ASPH
Zeco AA-4108[2] >= 3" CLD 23 ASPH
Zeco AA-4109[2] >= 3" CLD 23 ASPH
Zeco AA-4117[2] >= 3" CLD 23 ASPH

[1] Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 3 dry
    Recoat Cure Time and Temerature: 7 days at 73°F
[2] Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 3
    Maximum Thinner: None
    Final Cure Time and Temperature: 7 days at 75°F



 
Zingametall BVBA 
Rozenstraat 4
9810 Eke 
Belgium 
32 93 856 881
Visit this company's website


Facility : Eke, Belgium

Protective (Barrier) Materials

    Water Water
  Water Contact Contact Contact
Trade Designation Size Restriction Temp Material

Coatings - Pipe[1]
ZINGA >= 2133 mm C. HOT GALV

[1] Coating Notes:
    Colors: Grey or Grey with Aluminium shine
    Number Of Coats: 1-2
    Maximum Field Use Dry Thickness(in mils): 6
    Maximum Thinner: Up to 20% ZINGASOLV by mass
    Recoat Cure Time and Temperature: 3 hours at 20°C
    Final Cure Time/Temperature: 24 hours at 20°C
    Special Comments: Substrate should be grit blasted to an SA 2.5, Medium G.  Once cured, 
                      saturate the coating for 2 hours with water.  Saturation is the
                      continuous rinsing of the coating with running water.After 2 hours 
                      evacuate the system and let dry for 24 hours.  The next day saturate 
                      the coating for 2 hours, and then evacuate the system and let dry for 
                      24 hours.  The following day rinse for 2 hours with water and then let
    
                      dry for another 24 hours.

Coatings - Tank[1]
ZINGA >= 75,708 L C. HOT GALV

[1] Coating Notes:
    Colors: Grey or Grey with Aluminium shine
    Number Of Coats: 1-2
    Maximum Field Use Dry Thickness(in mils): 6
    Maximum Thinner: Up to 20% ZINGASOLV by mass
    Recoat Cure Time and Temperature: 3 hours at 20°C
    Final Cure Time/Temperature: 24 hours at 20°C
    Special Comments: Substrate should be grit blasted to an SA 2.5, Medium G.  Once cured, 
                      saturate the coating for 2 hours with water.  Saturation is the
                      continuous rinsing of the coating with running water.After 2 hours 
                      evacuate the system and let dry for 24 hours.  The next day saturate 
                      the coating for 2 hours, and then evacuate the system and let dry for 
                      24 hours.  The following day rinse for 2 hours with water and then let
    
                      dry for another 24 hours.



 
Zodiac Pool Systems LLC 
2882 Whiptail Loop #100
Carlsbad, CA 92010 
United States 
760-599-9600
Visit this company's website


Facility : La Garriga, Spain

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves
JANDY Ball Valves Double Union BVDU005 1/2" CLD 23 MLTPL
JANDY Ball Valves Double Union BVDU008 3/4" CLD 23 MLTPL
JANDY Ball Valves Double Union BVDU010 1" CLD 23 MLTPL
JANDY Ball Valves Double Union BVDU015 1 1/2" CLD 23 MLTPL
JANDY Ball Valves Double Union BVDU020 2" CLD 23 MLTPL
JANDY Ball Valves Double Union BVDU025 2 1/2" CLD 23 MLTPL
JANDY Ball Valves Double Union BVDU030 3" CLD 23 MLTPL
JANDY Ball Valves Double Union BVDU040 4" CLD 23 MLTPL
JANDY Ball Valves Single Union BVSU005 1/2" CLD 23 MLTPL
JANDY Ball Valves Single Union BVSU008 3/4" CLD 23 MLTPL
JANDY Ball Valves Single Union BVSU010 1" CLD 23 MLTPL
JANDY Ball Valves Single Union BVSU015 1 1/2" CLD 23 MLTPL
JANDY Ball Valves Single Union BVSU020 2" CLD 23 MLTPL
JANDY Ball Valves Single Union BVSU025 2 1/2" CLD 23 MLTPL
JANDY Ball Valves Single Union BVSU030 3" CLD 23 MLTPL



 
Zoeller Company 
3649 Cane Run Road
Louisville, KY 40211 
United States 
502-778-2731


Facility : # 1 USA

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[G]
30-0015 1 1/2" CLD 23 MLTPL
30-0020 2" CLD 23 MLTPL
30-0030 3" CLD 23 MLTPL
30-0208 1 1/4" CLD 23 MLTPL
30-0211 3" CLD 23 MLTPL
30-0212 4" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Zurn PEX, Inc. 
116 Maple Street
Commerce, TX 75428 
United States 
903-886-2580
Visit this company's website


Facility : Harborcreek, PA

Mechanical Plumbing Devices

Trade Designation      

Supply Stops
Zurn Qicktite® QV301 1/2" FPT x 1/2" MPT Angle Stop Valves      
Zurn Qicktite® QV302 1/2" FPT x 3/8" OD Angle Stop Valves      
Zurn Qicktite® QV311 1/2" T x 1/2" MPT Angle Stop Valves      
Zurn Qicktite® QV321 3/4" MPT x 1/2" MPT Angle Stop Valves      
Zurn Qicktite® QV401 1/2" FPT x 1/2" MPT Straight Stop Valves      
Zurn Qicktite® QV411 1/2" MPT x 1/2" MPT Straight Stop Valves      
Zurn Qicktite® QV421 3/4" MPT x 1/2" MPT Straight Stop Valves      
Zurn Qicktite® QV504 Hose Thread - 1/2" FPT Hose Bib Valves      
Zurn Qicktite® QV514 Hose Thread - 1/2" MPT Hose Bib Valves      
Zurn Qicktite® QV524 Hose Thread - 3/4" MPT Hose Bib Valves      


Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings[G]
Qest® 90° Drop Ear Ell, MPT x FPT 1/2" - 1" CLD 23 POM
Qest® 90° Ell, MPT x MPT 3/8" - 1 1/4" CLD 23 POM
Qest® 90° Street Ell, MPT x FPT 1/2" - 1" CLD 23 POM
Qest® Angle Stop, FPT x MHT 1/2" - 1 1/4" CLD 23 POM
Qest® Angle Stop, FPT x MPT 1/2" - 1 1/4" CLD 23 POM
Qest® Angle Stop, MPT x MHT 1/2" - 1 1/4" CLD 23 POM
Qest® Angle Stop, MPT x MPT 1/2" - 1 1/4" CLD 23 POM
Qest® Cap, FPT 1/2" - 3/4" CLD 23 POM
Qest® Check Valve, MPT x MPT 1/2" - 1 1/4" CLD 23 POM
Qest® Coupling, FPT x FPT 1/2" - 1" CLD 23 POM
Qest® Coupling, MPT x FPT 1/8" - 1 1/4" CLD 23 POM
Qest® Coupling, MPT x MPT 1/2" - 1 1/4" CLD 23 POM
Qest® Globe Valve, MPT x MPT 1/2" - 1 1/4" CLD 23 POM
Qest® Plug, MPT 1/2" - 3/4" CLD 23 POM
Qest® Straight Stop, FPT x MPT 1/2" - 1 1/4" CLD 23 POM
Qest® Straight Stop, MPT x MPT 1/2" - 1 1/4" CLD 23 POM
Qest® Straight Stop, MPT x MPT x MPT 1/2" - 1 1/4" CLD 23 POM
Qest® Tee, MPT 1/2" - 1 1/4" CLD 23 POM
Qest® Tee, MPT x MPT x FPT 1/8" - 1/2" CLD 23 POM
Qickport Fittings 1/2" - 1 1/4" CLD 23 POM
Qicktite Fittings 1/2" - 1 1/4" CLD 23 POM
ZurnPEX Fittings 1/2" - 1 1/4" CLD 23 POM

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Manifolds[G]
1" MPT Manifold Adapter - Female (QPAF) 1" x 1/2" C. HOT PSU
1" MPT Manifold Adapter - Male (QPAM) 1" x 1/2" C. HOT PSU
1" MPT Manifold Eldow (QPE) 1" x 1/2" C. HOT PSU
1" MPT Manifold Tee (QPT) 1" x 1/2" C. HOT PSU
ZurnPEX 3-Port Manifold body 1" x 1/2" C. HOT PSU
ZurnPEX 5-Port Manifold body 1" x 1/2" C. HOT MLTPL

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Zurn PEX, Inc. 
116 Maple Street
Commerce, TX 75428 
United States 
903-886-2580


Facility : # 5 China

Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings
1 1/2" MALE Sweat x 1 1/2" Barb (QQ900Gx)[G] 1/2" - 1" C. HOT MLTPL
1 Elbow (QQE55GXNPK1)[G] 1/2" - 1" C. HOT MLTPL
1 Equal Coupling (QQC55GXNPK1)[G] 1/2" - 1" C. HOT MLTPL
1 Equal Tee (QQT555GXNPK1)[G] 1/2" - 1" C. HOT MLTPL
1 x 1 x 1/2 Reducing Tee (QQT553GXNPK1)[G] 1/2" - 1" C. HOT MLTPL
1 x 1 x 3/4 Reducing Tee (QQT554GXNPK1)[G] 1/2" - 1" C. HOT MLTPL
1 x 3/4 Reducing Coupling (QQC54GXNPK1)[G] 1/2" - 1" C. HOT MLTPL
1 x 3/4 x 3/4 Reducing Tee (QQT544GXNPK1)[G] 1/2" - 1" C. HOT MLTPL
1" PEX x 1" FPT Non Swivel Adapter (QQUFC55GXNPK1)[G] 1/2" - 1" C. HOT MLTPL
1" PEX x 1" MPT (QQMC55GXNPK1)[G] 1/2" - 1" C. HOT MLTPL
1" PEX x 3/4" MPT (QQMC54GXNPK1)[G] 1/2" - 1" C. HOT MLTPL
1" Test Plug (QQP5GXNPK1)[G] 1/2" - 1" C. HOT MLTPL
1/2 Elbow (QQE33GXNPK1)[G] 1/2" - 1" C. HOT MLTPL
1/2 Equal Coupling (QQC33GXNPK1)[G] 1/2" - 1" C. HOT MLTPL
1/2 Equal Tee (QQT333GXNPK1)[G] 1/2" - 1" C. HOT MLTPL
1/2 x 1/2 x 3/4 Reducing Tee (QQT334GXNPK1)[G] 1/2" - 1" C. HOT MLTPL
1/2" O.D.PEX Barb x 1/2" O.D.PEX Barb (QQC33CGXNPK1)[G] 1/2" - 1" C. HOT MLTPL
1/2" PEX x 1/2" FPT (QQDE33BFGXNPK1)[G] 1/2" - 1" C. HOT MLTPL
1/2" PEX x 1/2" FPT Non Swivel Adapter (QQUFC33GXNPK1)[G] 1/2" - 1" C. HOT MLTPL
1/2" PEX x 1/2" MPT (QQMC33GXNPK1) 1/2" - 1" C. HOT MLTPL
1/2" PEX x 3/4" FPT Non Swivel Adapter (QQUFC34GXNPK1)[G] 1/2" - 1" C. HOT MLTPL
1/2" PEX x 3/4" MPT (QQMC34GXNPK1)[G] 1/2" - 1" C. HOT MLTPL
1/2" Test Plug (QQP3GXNPK1)[G] 1/2" - 1" C. HOT MLTPL
2" X 2" 45 Degree Barb Elbow ,2" X 2" 45 Degree Barb Elbow (QQE8845GX)[G] 1/2" - 1" C. HOT MLTPL
3/4 "PEX x 3/4" FPT (QQDE44BFGXNPK1)[G] 1/2" - 1" C. HOT MLTPL
3/4 Elbow (QQE44GXNPK1)[G] 1/2" - 1" C. HOT MLTPL
3/4 Equal Coupling (QQC44GXNPK1)[G] 1/2" - 1" C. HOT MLTPL
3/4 Equal Tee (QQT444GXNPK1)[G] 1/2" - 1" C. HOT MLTPL
3/4 x 1/2 Reducing Coupling (QQC43GXNPK1)[G] 1/2" - 1" C. HOT MLTPL
3/4 x 1/2 x 1/2 Reducing Tee (QQT433GXNPK1)[G] 1/2" - 1" C. HOT MLTPL
3/4 x 1/2 x 3/4 Reducing Tee (QQT434GXNPK1)[G] 1/2" - 1" C. HOT MLTPL
3/4 x 3/4 x 1/2 Reducing Tee (QQT443GXNPK1)[G] 1/2" - 1" C. HOT MLTPL
3/4" O.D.PEX Barb x 3/4" O.D.PEX Barb (QQC44CGXNPK1)[G] 1/2" - 1" C. HOT MLTPL
3/4" PEX x 1/2" MPT (QQMC43GXNPK1)[G] 1/2" - 1" C. HOT MLTPL
3/4" PEX x 3/4" FPT Non Swivel Adapter (QQUFC44GXNPK1)[G] 1/2" - 1" C. HOT MLTPL
3/4" PEX x 3/4" MPT (QQMC44GXNPK1)[G] 1/2" - 1" C. HOT MLTPL
3/4" Test Plug (QQP4GXNPK1)[G] 1/2" - 1" C. HOT MLTPL
3/4" x 1/2" (QQE43GXNPK1)[G] 1/2" - 1" C. HOT MLTPL
3/8 Equal Coupling (QQC22GXNPK1)[G] 1/2" - 1" C. HOT MLTPL
3/8 Equal Tee (QQT222GXNPK1)[G] 1/2" - 1" C. HOT MLTPL
3/8 x 1/2 Reducing Coupling (QQC32GXNPK1)[G] 1/2" - 1" C. HOT MLTPL
3/8" Test Plug (QQP2GXNPK1)[G] 1/2" - 1" C. HOT MLTPL
BULK 1/2 Male Swt x 3/8 Barb PEX (Qxx637x)[G] 1/2" - 1" C. HOT MLTPL
BULK 3/4 Female Sweat x 5/8 PEX Barb Coupling (QxxF4Jx)[G] 1/2" - 1" C. HOT MLTPL
BULK 3/4 Female Sweat x 5/8 PEX Barb Elbow (QxxFE4Jx)[G] 1/2" - 1" C. HOT MLTPL
BULK 3/4 Male Sweat x 5/8 PEX Barb Coupling (QxxM4Jx)[G] 1/2" - 1" C. HOT MLTPL
BULK 3/4 Male Sweat x 5/8 PEX Barb Elbow (QxxME4Jx)[G] 1/2" - 1" C. HOT MLTPL
BULK 3/8 Barb x 1/2 MPT PEX (QxxMC23x)[G] 1/2" - 1" C. HOT MLTPL
Bulk 1" Swivel X 3/4" Barb Adapter (MANYBARBG) 3/8" - 2" C. HOT MLTPL
LOW LEAD-QICKPORT DOUBLE SWIVEL HUB (QPDSHGX)[G] 1/2" - 1" C. HOT MLTPL
Low Lead - 1 1/2" x 1 1/2" 45 Degree Barb Elbow (QQE7745Gx)[G] 1/2" - 1" C. HOT MLTPL
Low Lead - 1 1/4" Barb x 1" MPT (QQMC65Gx)[G] 1/2" - 1" C. HOT MLTPL
Low Lead - 1 1/4" Male Sweat x 1 1/4" Barb (QQ712Gx)[G] 1/2" - 1" C. HOT MLTPL
Low Lead - 1-1/2" Barb x 1-1/2" FPT Adapter (QQUFC77Gx)[G] 1/2" - 1" C. HOT MLTPL
Low Lead - 1-1/4" Barb x 1-1/4" FPT Adapter (QQUFC66Gx)[G] 1/2" - 1" C. HOT MLTPL
Low Lead - 2" Barb x 2" FPT Adapter (QQUFC88Gx)[G] 1/2" - 1" C. HOT MLTPL
Low Lead - 2" Male Sweat x 2" Barb (QQ975Gx)[G] 1/2" - 1" C. HOT MLTPL
Low Lead - Coupling - 1" Barb x 1" Barb (QQC55GFx)[G] 1/2" - 1" C. HOT MLTPL
Low Lead - Coupling - 1" Barb x 1/2" FPT (QQFSC53GFx)[G] 1/2" - 1" C. HOT MLTPL
Low Lead - Elbow - 1" Barb x 1" Barb (QQE55GFx)[G] 1/2" - 1" C. HOT MLTPL
Low Lead - Female Sweat Adapter - 1" Barb x 1" Sweat (QQ800GFx)[G] 1/2" - 1" C. HOT MLTPL
Low Lead - MALE ADAPTER - 1" Barb x 1" MPT (QQMC55GFx)[G] 1/2" - 1" C. HOT MLTPL
Low Lead - Male Sweat Adapter - 1" Barb x 1" Sweat (QQ700GFx)[G] 1/2" - 1" C. HOT MLTPL
Low Lead - Plug - 1" Barb (QQP5GFx)[G] 1/2" - 1" C. HOT MLTPL
Low Lead - Tee - 1" Barb x 1" Barb x 1" Barb (QQT555GFx)[G] 1/2" - 1" C. HOT MLTPL
Low Lead - Tee - 1" Barb x 1" Barb x 1/2" Barb (QQT553GFx)[G] 1/2" - 1" C. HOT MLTPL
Low Lead - Tee - 1" Barb x 1" Barb x 1/2" FPT (QQFST553GFx)[G] 1/2" - 1" C. HOT MLTPL
Low Lead - Tee - 1" Barb x 1" Barb x 3/4" Barb (QQT554GFx)[G] 1/2" - 1" C. HOT MLTPL
Low Lead Brass 1" Swivel x 3/4" MIP Adapter (QQTFC45Gx)[G] 1/2" - 1" C. HOT MLTPL
Low Lead Brass Coupling - 1-1/4" Barb x 3/4" Barb (QQC64Gx)[G] 1/2" - 1" C. HOT MLTPL
Low Lead Brass Coupling - 2" Barb x 1" Barb (QQC85Gx)[G] 1/2" - 1" C. HOT MLTPL
Low Lead Brass Coupling - 2" x 1-1/4" Barb (QQC86Gx)[G] 1/2" - 1" C. HOT MLTPL
Low Lead Brass Coupling- 1-1/2" Barb x 3/4" Barb (QQC74Gx)[G] 1/2" - 1" C. HOT MLTPL
Low Lead Brass Elbow Adapter - 3/4" Female Sweat x 3/4" Barb (QQE775Gx)[G] 1/2" - 1" C. HOT MLTPL
Low Lead Brass Street Elbow - 1/2" Barb x 1/2" MPT (QQE33BTGx)[G] 1/2" - 1" C. HOT MLTPL
Low Lead Brass Tee - 1 1/2" x 1" x 1" Barb (QQT755Gx)[G] 1/2" - 1" C. HOT MLTPL
Low Lead-BULK 1 1/4 x 1 HEX Nipple (QxxBC65TGx)[G] 1/2" - 1" C. HOT MLTPL
Low Lead-BULK 1 1/4 x 3/4 HEX Nipple (QxxBC64TGx)[G] 1/2" - 1" C. HOT MLTPL
Low Lead-BULK 1 x 1 HEX Nipple (QxxBC55TGx)[G] 1/2" - 1" C. HOT MLTPL
Low Lead-BULK 1 x 1/2 HEX Nipple (QxxBC53TGx)[G] 1/2" - 1" C. HOT MLTPL
Low Lead-BULK 1" SWIVEL x 3/4" MIP ADAPTER (QxMC54MANG)[G] 1/2" - 1" C. HOT MLTPL
Low Lead-BULK 1/2 x 1/2 HEX Nipple (QxxBC33TGx)[G] 1/2" - 1" C. HOT MLTPL
Low Lead-BULK 1/2 x 3/8 HEX Nipple (QxxBC32TGx)[G] 1/2" - 1" C. HOT MLTPL
Low Lead-BULK 1x3/4 HEX Nipple (QxxBC54TGx)[G] 1/2" - 1" C. HOT MLTPL
Low Lead-BULK 3/4 x 1/2 HEX Nipple (QxxBC43TGx)[G] 1/2" - 1" C. HOT MLTPL
Low Lead-BULK 3/4 x 3/4 HEX Nipple (QxxBC44TGx)[G] 1/2" - 1" C. HOT MLTPL
Low Lead-BULK 3/4 x 3/8 HEX Nipple (QxxBC42TGx)[G] 1/2" - 1" C. HOT MLTPL
Low Lead-QICKPORT DOUBLE SWIVEL HUB (QPDSHGx)[G] 1/2" - 1" C. HOT MLTPL
No Lead Brass Elbow Adapter - 3/4" Male Sweat x 3/4" Barb (QQE675Gx)[G] 1/2" - 1" C. HOT MLTPL
No Lead Brass Street Elbow - 1/2" Barb x 1/2" FPT (QxxE33BSGx)[G] 1/2" - 1" C. HOT MLTPL
ZURN PEX 1 1/2" (QQC77GX) PEX Barb Coupling[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 1 1/2" (QQE77GX) PEX Elbow[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 1 1/2" (QQP7GX) Test Plug[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 1 1/2" Barb x 1 1/2" MPT (QQMC77GX)[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 1 1/2" PEX x 1 1/2" (QQ950GX) Female Sweat[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 1 1/2" x 1 1/2" x 1" (QQT775GX) PEX Barb Tee[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 1 1/2" x 1 1/2" x 3/4" (QQT774GX) PEX Barb Tee[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 1 1/2" x 1 1/4" (QQC76GX) PEX Barb Coupling[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 1 1/4" (QQE66GX) Elbow[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 1 1/4" (QQP6GX) Test Plug[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 1 1/4" (QQT666GX) Equal Tee[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 1 1/4" PEX x 1 1/4" (QQ812GX) Female Sweat[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 1 1/4" X 1 1/4" (QQC66GX) PEX Barb Coupling[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 1 1/4" X 1" (QQC65GX) PEX Barb Coupling[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 1" (QQC55GX) Equal Coupling[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 1" (QQE55GX) Elbow[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 1" (QQT555GX) Equal Tee[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 1" PEX x 3/4" (QQMC54GX) MPT Male Adapter[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 1" Plug (MANPLUGG) 3/8" - 2" C. HOT MLTPL
ZURN PEX 1" x 1" x 1/2" (QQT553GX) Reducing Tee[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 1" x 1" x 3/4" (QQT554GX) Reducing Tee[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 1" x 3/4" x 1" (QXX545GX) Reducing Tee[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 1" x 3/4" x 1/2" (QXX543GX) PEX Tee[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 1" x 3/4" x 3/4" (QQT544GX) Reducing Tee[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 1/2" (QQC33GX) Equal Coupling[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 1/2" (QQE33GX) Elbow[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 1/2" (QQT333GX) Equal Tee[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 1/2" PEX x 1/2" (QXXC33CGX) PB Coupling[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 1/2" PEX x 1/2" FPT (QXXSFC33GX) Swivel Cone Connection[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 1/2" x 1/2" x 3/4" (QQT334GX) Reducing Tee[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 1/2" x 1/2" x 3/8" (QXX332GX) IN PEX Brass Tee[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 1/2" x 3/4" (QQC43GX) Reducing Coupling[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 1/2" x 3/8" x 1/2" (QXX323GX) IN PEX BRASS TEE 3/8" - 2" C. HOT MLTPL
ZURN PEX 2" (QQC88GX) PEX Barb Coupling[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 2" (QQE88GX) PEX Barb Elbow[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 2" (QQP8GX) PEX Barb Plug[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 2" x 1 1/2" (QQC87GX) PEX Barb Coupling[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 3/4" (QQT444GX) Equal Tee[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 3/4" PEX x 3/4" PB (QXXC44CGX) Coupling[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 3/4" X 3/4" X 3/8" (QXX442GX) IN PEX Brass Tee[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 3/4" x 1" (QQC54GX) Reducing Coupling[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 3/4" x 1/2" (QQE43GX) Elbow[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 3/4" x 1/2" x 1/2" (QQT433GX) Reducing Tee[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 3/4" x 1/2" x 3/4" (QQT434GX) Reducing Tee[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 3/4" x 3/4" x 1" (QXX445GX) Reducing Tee[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 3/4" x 3/4" x 1/2" (QQT443GX) Reducing Tee[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 3/8" (QQT222GX) Equal Tee[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 3/8" x 3/8" x 1/2" (QXX223GX) IN PEX Brass Tee[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 1 1/2" (QQT777GX) PEX Barb Tee[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 1 1/2" Barb x 1 1/2" x 1/2" (QQT773GX) PEX Barb Tee[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 1 1/2" Barb x 1 1/4" x 1 1/4" (QQT766GX) PEX Barb Tee[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 1 1/2" Barb x 1" Barb (QQC75GX) PEX Barb Coupling[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 1 1/2" x 1 1/2" x 1" (QQT775GX) PEX Barb Tee[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 1 1/2" x 1 1/4" x 1" (QQT765GX) PEX Barb Tee[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 1 1/2" x 1 1/4" x 3/4" (QQT764GX) PEX Barb Tee[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 1 1/2" x 1" x 3/4" (QQT754GX) PEX Barb Tee[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 1 1/2" x 1-1/2" x 1 1/4" PEX Barb Tee (QQT776GX)[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 1 1/2" x 3/4" x 3/4" (QXX744GX) PEX Barb Tee[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 1 1/4" Barb X 1 1/4" MPT (QQMC66GX) Male Adapter[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 1 1/4" x 1 1/4" x 1" (QQT665GX) PEX TEE[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 1 1/4" x 1 1/4" x 1/2" (QQT663GX) PEX Tee[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 1 1/4" x 1 1/4" x 3/4" (QQT664GX) PEX Tee[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 1 1/4" x 1" x 1" (QQT655GX) PEX Tee[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 1 1/4" x 1" x 3/4" (QQT654GX) PEX Brass Tee[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 1" (QQP5GX) Test Plug 3/8" - 2" C. HOT MLTPL
ZURN PEX 1" PEX x 1" (QQ700GX) Male Sweat[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 1" PEX x 1" (QQ800GX) Female Sweat[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 1" PEX x 1" FPT (QQUFC55GX) Non Swivel Adapter 3/8" - 2" C. HOT MLTPL
ZURN PEX 1" PEX x 1" MPT (QQMC55GX) Male Adapter[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 1" x 1/2" x 1" PEX (QXX535GX) Tee[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 1" x 1/2" x 3/4" (QXX534GX) PEX Tee[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 1/2" (QQP3GX) Test Plug 3/8" - 2" C. HOT MLTPL
ZURN PEX 1/2" PEX x 1/2" (QXX650GX) Male Sweat[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 1/2" PEX x 1/2" (QXX750GX) Female Sweat[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 1/2" PEX x 1/2" FPT (QQDE33BFGX) Drop-Ear Elbow[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 1/2" PEX x 1/2" FPT (QQUFC33GX) Non Swivel Adapter 3/8" - 2" C. HOT MLTPL
ZURN PEX 1/2" PEX x 1/2" MPT (QQMC33GX) Male Adapter[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 1/2" PEX x 3/4" (QQUFC34GX) FPT Non Swivel Adapter 3/8" - 2" C. HOT MLTPL
ZURN PEX 1/2" PEX x 3/4" MPT (QQMC34GX) Male Adapter[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 2" Barb x 2" MPT (QQMC88GX) PEX Barb Adapter[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 2" PEX Barb x 2" (QQ1050GX) Female Sweat[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 2" x 1 1/2" x 1 1/2" PEX Barb Tee[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 2" x 1 1/2" x 1 1/4" (QQT876GX) PEX Barb Tee[G] 3/8" – 2" C. HOT MLTPL
ZURN PEX 2" x 1 1/2" x 1" (QQT875GX) PEX Barb Tee[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 2" x 1 1/2" x 3/4" (QQT874GX) PEX Barb Tee[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 2" x 1 1/4" x 1 1/4" (QXX866GX) PEX Barb Tee[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 2" x 2" x 1 1/2" (QQT887GX) PEX Barb Tee[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 2" x 2" x 1 1/4" (QQT886GX) PEX Barb Tee[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 2" x 2" x 1" (QQT885GX) PEX Barb Tee[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 2" x 2" x 1/2" (QQT883GX)PEX Barb Tee[G] 3/8" - 2" CLD 23 MLTPL
ZURN PEX 2" x 2" x 2" (QQT888GX) PEX Barb Tee[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 2" x 2" x 3/4" (QQT884GX) PEX Barb Tee[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 3/4" (QQC44GX) Equal Coupling[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 3/4" (QQP4GX) Test Plug 3/8" - 2" C. HOT MLTPL
ZURN PEX 3/4" PEX x 1/2" MPT (QQMC43GX) Male Adapter[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 3/4" PEX x 3/4" (QXX675GX) Male Sweat[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 3/4" PEX x 3/4" (QXX775GX) Female Sweat[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 3/4" PEX x 3/4" FPT (QQDE44BFGX) Drop-Ear Elbow[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 3/4" PEX x 3/4" FPT (QQUFC44GX) Non Swivel Adapter 3/8" - 2" C. HOT MLTPL
ZURN PEX 3/4" PEX x 3/4" FTP (QXXSFC44GX) Swivel Cone Connection[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 3/4" PEX x 3/4" MPT (QQMC44GX) Male Adapter[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 3/4" X 1" MPT (QQMC45GX) PEX Brass Male Adapter[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 3/4" x 3/4" (QQE44GX) Elbow[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 3/8" (QQC22GX) Equal Coupling[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 3/8" (QQP2GX) Test Plug[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 3/8" IN x 1/2" (QXX637GX) MALE SWT PEX BRASS ADAPTER[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 3/8" PEX x 1/2" (QXXMC23GX) MPT Male Adapter[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 3/8" PEX x 1/2" (QXXSFC23GX) FPT Swivel Cone Connection[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX 3/8" x 1/2" (QQC32GX) Reducing Coupling[G] 3/8" - 2" C. HOT MLTPL
ZURN PEX Low Lead-Bulk 1" Swivel x Barb Adapter (MAN6BARBG) Swivel[1] [G] 3/8" - 2" C. HOT MLTPL

[1] Product also complies to NSF/ANSI 372.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Zurn PEX, Inc. 
116 Maple Street
Commerce, TX 75428 
United States 
903-886-2580


Facility : # 9 USA

Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings[G]
QXXBC32TGX 3/4" – 1 1/4" C. HOT BRASS
QXXBC42TGX 3/4" – 1 1/4" C. HOT BRASS
QXXBC43TGX 3/4" – 1 1/4" C. HOT BRASS
QXXBC53TGX 3/4" – 1 1/4" C. HOT BRASS
QXXBC54TGX 3/4" – 1 1/4" C. HOT BRASS
QXXBC64TGX 3/4" – 1 1/4" C. HOT BRASS
QXXBC65TGX 3/4" – 1 1/4" C. HOT BRASS

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
ZYfire Hose Corporation 
No. 88, Kaiyang Road
Jiangyan District 
Taizhou, Jiangsu 225500 
China 
86 523 8880 2123
Visit this company's website


Facility : Taizhou, Jiangsu, China

Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Hose[G]
Aquatran Premier 1" - 20" CLD 23 PUR

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Équipements Lapierre, Inc. 
99 Rue de L'Escale
St-Ludger, QC G0M 1W0 
Canada 
819-548-5454
Visit this company's website


Facility : St-Ludger, Québec, Canada

Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Tubing
Pladecc 1/2" - 3" CLD 23 PE
Pladecc Super-500 1/2" - 3" CLD 23 PE



OQC Registration Program
Origine e Qualità Controllata
OQC





 
FIP - Formatura Iniezione Polimeri S.p.A. 
Pian di Parata
I-16015 Casella Genova 
Italy 
39 01 096 211
Visit this company's website


Facility : Casarza Ligure (Genoa), Italy


Fittings Size  
ABS Fitting d12-315 1/4" - 12"      
Compression fittings d20-110 1/2" - 4"      
PP Clamp Saddle d20-315 1/2" - 12"      
PVC-U Fitting d12-315 1/4" - 12"      
Valves Size  
111 PVC-U d20-63 1/2" - 2"      
112 PVC-U d20-63 1/2" - 2"      
301 PVC-U d20-110 1/2" - 4"      
302 PVC-U d20-110 1/2" - 4"      
303 PVC-U d20-110 1/2" - 4"      
305 PVC-U d20-110 1/2" - 4"      
311 PVC-U d75-110 2 1/2" - 4"      
312 PVC-U d75-110 2 1/2" - 4"      
321 PVC-U d20-110 1/2" - 4"      
322 PVC-U d20-110 1/2" - 4"      
324 PVC-U d75-110 2 1/2" - 4"      
325 PVC-U d75-110 2 1/2" - 4"      
334 PVC-U d20-32 1/2" - 1"      
335 PVC-U d20-32 1/2" - 1"      
420 PVC-U d20-110 1/2" - 4"      
421 PVC-U d20-110 1/2" - 4"      
724 PVC-U d20-110 1/2" - 4"      
725 PVC-U d20-110 1/2" - 4"      
930 PVC-U d20-63 1/2" - 2"      
931 PVC-U d20-63 1/2" - 2"      



Facility : Casella Genova, Italy


Fittings Size  
Magnum PP-B d 20-63 1/2" - 2"      
Magnum PP-B d75-110 2 1/2" - 4"      
PP-H Fitting d20-110 1/2" - 4"      
PVC-C Fitting d16-160 3/8" - 6"      
PVC-U Fitting d12-315 1/4" - 12"      
PVDF Fitting d16-110 3/8" - 4"      
UIFV clamp saddles PVC-U d32-225 1" - 8"      
Valves Size  
SXE PVC-C d16-110 3/8" - 4"      
SXE PVC-U d16-110 3/8" - 4"      
VE PVC-U d75-110 2 1/2" - 4"      
VEE PVC-U d16-110 3/8" - 4"      
VKD & TKD PP-H d 20-63 1/2" - 2"      
VKD & TKD PVC-C d16-63 3/8" - 2"      
VKD & TKD PVC-U d16-63 3/8" - 2"      
VKD & TKD PVDF d16-63 3/8" - 2"      
VKD PP-H d75-110 2 1/2" - 4"      
VKD PVC-C d75-110 2 1/2" - 4"      
VKD PVC-U d75-110 2 1/2" - 4"      
VKD PVDF d75-110 2 1/2" - 4"      
VKR PVC-C 3/8" - 2"      
VKR PVC-U 3/8" - 2"      
VX PVC-C d75-110 2 1/2" - 4"      
VX PVC-U d75-110 2 1/2" - 4"      
VXE PVC-C d16-110 3/8" - 4"      
VXE PVC-U d16-110 3/8" - 4"      



 
Fratelli Pettinaroli Spa 
Via Pianelli 38
28017 S. Maurizio D' Opaglio (NO) 
Novara 
Italy 
39 032 296 217
Visit this company's website


Facility : S. Maurizio D'Opaglio (NO), Italy

Valves Size  
035/M N/A      
51CE 1/2" - 2"      
51CE/1V 1/2" - 1"      
51CE/2V 1/2" - 1"      
51CEV 1/2" - 2"      
51CS 1/2" - 1 1/2"      
51CS/1V 1/2" - 1 1/2"      
51CS/1V 1/2" - 1 1/2"      
51CSV 1/2" - 1 1/2"      
51EU 1/2"      
51EU 3/4"      
51EU 1"      
51EU 1 1/4"      
51EU 1 1/2"      
51EU 2"      
51F 1/2"      
51F 3/4"      
51F 1"      
51F 1 1/4"      
51F 1 1/2"      
51F 2"      
52CE 1/2" - 1 1/4"      
52CE/1V 1/2" - 1"      
52CE/2 1/2" - 1"      
52CE/2V 1/2" - 1"      
52CET 1/2" - 1 1/4"      
52CEV 1/2" - 1 1/4"      
52CS/1V 1/2" - 1 1/4"      
52CSV 1/2" - 1 1/4"      
52EU 1/2"      
52EU 3/4"      
52EU 1"      
52EU 1 1/4"      
52EU 1 1/2"      
52EU 2"      
52F 1/2"      
52F 3/4"      
52F 1"      
52MET 1/2"      
52MET 3/4"      
52MET 1"      
52MET 1 1/4"      
52MET 1 1/2"      
52MET 2"      
52MET/1 1/2"      
52MET/1 3/4"      
52MET/1 1"      
52MET/1 1 1/4"      
53EU 1/2"      
52MET/1 1 1/2"      
52MET/1 2"      
53EU 3/4"      
53EU 1"      
53EU 1 1/4"      
53EU 1 1/2"      
53EU 2"      
7020 3/4"      
7020 1"      
JP100G 1/2" - 2"      
P 100 100% Full PORT 1/2" - 2"      
S-100C 1/2" - 2"      
S101ASG Kit 3/4" - 1"      
T-100C 1/2" - 2"      
T100NEG 1/2" - 2"      
T101ASG KIT 3/4" - 1"      
T90G 1/2"      
T100UEG 1 1/4" - 2"      



 
Il Flessibile Di Nicastri & C. Srl 
Via F. Vedani 16
Invorio (NO) 28045 
Italy 
39 32 225 5686
Visit this company's website


Facility : Invorio (NO), Italy

Flexible Plumbing Connectors Size  
FIA1 ww xxxx /yyyy/zzz[1] NA      
FIA1BC ww xxxx /yyyy/zzz[1] NA      
FIA1BG ww xxxx /yyyy/zzz[1] NA      
FIA2 ww xxxx /yyyy/zzz[1] NA      
FIA2BC ww xxxx /yyyy/zzz[1] NA      
FIA2BG ww xxxx /yyyy/zzz[1] NA      
FOA1 BD ww xxxx /yyyy/zzz[1] NA      
FOA1 ww xxxx /yyyy/zzz[1] NA      
FOA1BC ww xxxx /yyyy/zzz[1] NA      
FOA1BG ww xxxx /yyyy/zzz[1] NA      
FOA2 ww xxxx /yyyy/zzz[1] NA      
FOA2BC ww xxxx /yyyy/zzz[1] NA      
FOA2BD ww xxxx /yyyy/zzz[1] NA      
FOA2BG ww xxxx /yyyy/zzz[1] NA      
FPAKBG.SB xx yyyy zzz[2] NA      
FPAKBG.SL xx yyyy zzz[2] NA      
FPAKBG.SN xx yyyy zzz[2] NA      
FPAKBG.SS xx yyyy zzz[2] NA      
FPAKKK.SB xx yyyy zzz[2] NA      
FPAKKK.SL xx yyyy zzz[2] NA      
FPAKKK.SN xx yyyy zzz[2] NA      
FPAKKK.SS xx yyyy zzz[2] NA      
FXW2CX NA      

[1] Collection name:
    FOA1      - Brass shower flexible hose with PP connector
    FOA2      - Brass shower flexible hose with brass connector
    FIA1      - Inox   shower flexible hose with PP connector
    FIA2      - Inox   shower flexible hose with brass connector
    FXW2      - Metal shower flexible hose with brass connector          
    BD-BG-BC  - NF certified 
    CX        - DVGW certified
    ww        - Technical certification of the product
    xxxx      - External plating of the flexible hose
    yyyy      - Fittings connection
    zzz       - The length (10-250 cm)
[2] Collection name:
    FPA         - PVC shower flexible hoses
    KKK         - Technical certification of the product
    KBG         - NF certified
    SL-SS-SB-SN - External color of the PVC hose
    xx          - External plating of fittings
    yyyy        - Fittings connection
    zzz         - The length (10-250 cm)



 
ITG SRL 
Via Fusline 36
25036 Palazzolo Sull'Oglio (Brescia) 
Italy 
39 030 7403534


Facility : Palazzolo Sull'Oglio (Brescia), Italy

Gasket/Sealing Materials Size  
HT45BL2-0201 NA      
HT50BL2-0201 NA      
HT55BL2-0202 NA      
HT60BL2-0201 NA      
LS40T-0301 NA      
LS50T-0301 NA      
LS60T-0301 NA      
LS70T-0301 NA      
LS80T-0301 NA      
NB55N-0201 NA      
NB60N-0203 NA      
NB65N-0201 NA      
NB70N-0203 NA      
NB75N-0201 NA      
NB80N-0203 NA      
NB85N-0202 NA      
PX70N-0201 NA      



 
Lopigom SRL 
Via Rossini, 11 
24060 Credaro (BG) 
Italy 
39 03 592 7098


Facility : Credaro (BG), Italy




Gasket/Sealing Materials Size  
LOPI50 NA      
LOPI60 NA      
LOPI70 NA      
LOPI80 NA      
SI602/AL NA      
NBR Material Size  
NB 551/KTW NA      
NB 701/KTW NA      
O-Rings Size  
9155-I NA      
9173-I NA      
9328-I NA      
9380-I NA      
9403-I NA      
9404-I NA      
9409-P NA      
9430-I NA      
9431-I NA      
9432-I NA      
9433-I NA      
9434-I NA      
9435-I NA      
9436-I NA      
9437-P NA      
9447-P NA      
9448-P NA      
9460-I NA      
9465-I NA      
9470-I NA      
9472-P NA      
9478-I NA      
9479-I NA      
9491 NA      
9496-I NA      
9510-I NA      
9512-I NA      
9523-P NA      
9525-P NA      
9539-I NA      
9545-I NA      
9546-I NA      
9547-I NA      
9549-I NA      
9559-P NA      
9564-I NA      
9565-I NA      
9566-I NA      
9567-I NA      
9568-I NA      
9572-I NA      
9573-I NA      
9574-I NA      
9575-I NA      
9576-I NA      
9577-I NA      
9578-I NA      
9579-I NA      
9580-I NA      
9581-I NA      
9582-I NA      
9583-I NA      
9584-I NA      
9585-I NA      
9592-I NA      
9593-I NA      
9594-I NA      
9595-I NA      
9596-I NA      
9597-I NA      
9598-I NA      
9599-I NA      
9600-I NA      
9601-I NA      
9602-I NA      
9603-I NA      
9609-I NA      
9610-P NA      
9611-I NA      
9612-I NA      
9613-I NA      
9614-I NA      
9615-I NA      
9617-I NA      
9618-I NA      
9619-I NA      
9620-I NA      
9624-I NA      
9625-I NA      
9627-I NA      
9630-I NA      
9632-P NA      
9633-P NA      
9634-P NA      
9635-I NA      
9640-I NA      
9649-I NA      
9650-I NA      
9653-I NA      
9659-I NA      
9660-I NA      
9661-I NA      
9662-I NA      
9663-I NA      
9664-I NA      
9665-I NA      
9666-I NA      
9668-I NA      
9669-I NA      
9674-LC8 NA      
9675-LC8 NA      
9676-LC8 NA      
9678-I NA      
9681-I NA      
9682-I NA      
9684-I NA      
9695-I NA      
9704-I NA      
9705 NA      
9708-I NA      
9713-I NA      
9714-I-SOPESSO NA      
9715-P NA      
9716-I-SOPESSO NA      
9723-I NA      
9726-I NA      
9727-I NA      
9728-I NA      
9729-I NA      
9731-I NA      
9732-I NA      
9733-I NA      
9734-I NA      
9735-I NA      
9736-I NA      
9741-I NA      
9742-I NA      
9743-I NA      
9744-I NA      
9745-I NA      
9751-I NA      
9755-I NA      
9756-I NA      
9757-I NA      
9758-I NA      
9760-I NA      
9769-I NA      
9770-I NA      
LOPI50 NA      
LOPI60 NA      
LOPI70 NA      
LOPI80 NA      
SI602/AL NA      
Silicone Material Size  
SI401/AL NA      
SI402/AL NA      
SI403/AL NA      
SI501/AL NA      
SI502/AL NA      
SI503/AL NA      
SI601/AL NA      
SI602/PL NA      
SI603/AL NA      
SI701/AL NA      
SI702/AL NA      
SI703/AL NA      
SI752/PL NA      
SI801/AL NA      



 
MRG S.r.l. 
Via Per Baraggia, 1
28024 Gozzano (NO) 
Italy 
39 0322 94131
Visit this company's website


Facility : Gozzano (NO), Italy

Flexible Plumbing Connectors Size  
ABCDE[1] NA      
AOBCDE[2] NA      

[1] A - Exterior finish and interior liner

        B - White nylon braiding and silicone liner

        G - Grey nylon braiding and silicone liner

        N - Black nylon braiding and silicone liner

        R - PVC coating and silicone liner

        T - Stainless steel and PEX liner

        X - Stainless steel and silicone liner

    B - Hose diameter

        1 - 6mm ID x 10mm OD

        2 - 8mm ID x 12mm OD

    C - Fitting combination must be designated as one of the following: 010, 011, 012,

        013, 014, 018, 019, 021, 022, 024, 025, 026, 030, 031, 032, 036, 039, 040, 041,

        042, 043, 044, 045, 048, 050, 051, 052, 054, 055, 056, 063, 064, 065, 066, 070,

        071, 072, 073, 074, 075, 076, 078, 080, 081, 082, 083, 084, 085, 086, 088, 089,

        090, 091, 092, 093, 094, 096, 097, 098, 099, 100, 101, 102, 104, 105, 106, 107,

        110, 112, 114, 119, 123, 124, 125, 126, 127, 139, 142, 145, 147, 149, 152, 153,

        154, 155, 157, 158, 167, 168, 169, 177, 179, 180, 181, 182, 184, 185, 186, 188,

        189, 190, 191, 192, 195, 196, 197, 198, 199, 200, 208, 209, 211, 215, 216, 217,

        218, 219, 220, 222, 223, 224, 227, 233, 235, 236, 237, 238, 241, 244, 245, 247,

        249, 259, 261, 263, 264, 272, 273, 274, 277, 278, 280, 283, 284, 286, 290, 291,

        292, 294, 296, 297, 299, 300, 301, 302, 303, 304, 305, 306, 311, 312, 313, 314,

        315, 316, 329, 337, 339, 341, 342, 351, 352, 353, 357, 364, 365, 366, 367, 368,

        369, 370, 371, 372, 374, 375, 376, 377, 378, 379, 380, 381, 382, 383, 389, 408,

        415, 416, 420, 421, 422, 423, 424, 428, 430, 431, 432, 433, 434, 436, 439, 440,

        448, 457, 459, 462, 523, 530, 531, 541, 542, 543, 546, 550, 552, 553, 554, 557,

        566, 572, 574, 575, 580, 589, 591, 595, 596, 602, 613, 614, 615, 617, 664, 669,

        678, 680, 683

    D - Sleeve, hose approval, and fittings information

        B - Stainless steel braid with blue stripes

        C - Hose packed in plastic bag

        G - Inserted gasket

        I - Stainless steel sleeve (inox)

        N - NSF authorized

        R - Stainless steel braid with red stripes

    E - Maximum length of Certified connector is 2000mm

    
[2] A - Exterior finish and interior liner

        B - White nylon braiding and silicone liner

        G - Grey nylon braiding and silicone liner

        N - Black nylon braiding and silicone liner

        R - PVC coating and silicone liner

        T - Stainless steel and silicone liner

        X - Stainless steel and PEX liner

        O - Connectors made with low lead brass

    B - Hose diameter

        1 - 6mm ID x 10mm OD

        2 - 8mm ID x 12mm OD

    C - Fitting combination must be designated as one of the following: 010, 011, 012,

        013, 014, 018, 019, 021, 022, 024, 025, 026, 030, 031, 032, 036, 039, 040, 041,

        042, 043, 044, 045, 048, 050, 051, 052, 054, 055, 056, 063, 064, 065, 066, 070,

        071, 072, 073, 074, 075, 076, 078, 080, 081, 082, 083, 084, 085, 086, 088, 089,

        090, 091, 092, 093, 094, 096, 097, 098, 099, 100, 101, 102, 104, 105, 106, 107,

        110, 112, 114, 119, 123, 124, 125, 126, 127, 139, 142, 145, 147, 149, 152, 153,

        154, 155, 157, 158, 167, 168, 169, 177, 179, 180, 181, 182, 184, 185, 186, 188,

        189, 190, 191, 192, 195, 196, 197, 198, 199, 200, 208, 209, 211, 215, 216, 217,

        218, 219, 220, 222, 223, 224, 227, 233, 235, 236, 237, 238, 241, 244, 245, 247,

        249, 259, 261, 263, 264, 272, 273, 274, 277, 278, 280, 283, 284, 286, 290, 291,

        292, 294, 296, 297, 299, 300, 301, 302, 303, 304, 305, 306, 311, 312, 313, 314,

        315, 316, 329, 337, 339, 341, 342, 351, 352, 353, 357, 364, 365, 366, 367, 368,

        369, 370, 371, 372, 374, 375, 376, 377, 378, 379, 380, 381, 382, 383, 389, 408,

        415, 416, 420, 421, 422, 423, 424, 428, 430, 431, 432, 433, 434, 436, 439, 440,

        448, 457, 459, 462, 523, 530, 531, 541, 542, 543, 546, 550, 552, 553, 554, 557,

        566, 572, 574, 575, 580, 589, 591, 595, 596, 602, 613, 614, 615, 617, 664, 669,

        678, 680, 683

    D - Sleeve, hose approval, and fittings information

        B - Stainless steel braid with blue stripes

        C - Hose packed in plastic bag

        G - Inserted gasket

        I - Stainless steel sleeve (inox)

        N - NSF authorized

        R - Stainless steel braid with red stripes

    E - Maximum length of Certified connector is 2000mm



 
ODE SRL Società Unipersonale 
Via Borgofrancone, 18
23823 Colico, LC 
Italy 
39 034 1930570
Visit this company's website


Facility : Colico, LC, Italy

Solenoid Valves Size  
21WN6K1E250-10T5 1"      
21WN6K1V250-10T5 1"      



 
Rubinetterie 3M SRL 
Via Mattei, 10
53041 Asciano (Siena) 
Italy 
39 0 577 718 293
Visit this company's website


Facility : Asciano (Siena), Italy

Faucets[1] Size  
AA36-10-HG-BF-ZZ N/A      
AA71-11-HG-CP-ZZ N/A      

[1] Collection name:
    AA36 - Blok
    AA71 - Cleo
    Faucet type:
    10 - Single lever wash basin mixer
    11 - Wash basin mixer without pop-up waste hole
    Finish:
    HG - Finish shall be either:
         CC - Chrome/chrome finishing
         JJ - Brush nickel/brush nickel
    Lever/handle style:
    BF - Blok
    CP - Cleo
    Production type:
    ZZ - Standard



 
S.T.S.R. SRL 
Via Milano 7/5
20084 Lacchiarella (MI) 
Italy 
39 02 90076832
Visit this company's website


Facility : Lacchiarella (MI), Italy

Faucet Cartridges Size  
ST 113 XX YY KK ABCD HYDROCLOSED[1] NA      
ST 119 XX YY KK ABCD HYDROMIGNON[1] NA      
ST 123 XX YY KK ABCD JOYSTICK CBR[1] NA      
ST 205 XX YY KK ABCD HYDROCUSTOM[1] NA      
ST 212 XX YY KK ABCD HYDROLOW[1] NA      
ST 231 XX YY KK ABCD HYDROMINIMAL[1] NA      
ST 232 XX YY KK ABCD HYDROMINIMAL PROGRESSIV[1] NA      
ST 240 XX YY KK ABCD HYDROPRODIVERTER 3[2] NA      
ST 325 XX YY KK ABCD HYDROMINIMAL JOYSTICK[1] NA      

[1] Naming convention for ceramic mixing cartridges
    XX - Alphanumeric digits for stem shape or pin size
    YY - Alphanumeric digits for top cap
    KK - Alphanumeric digits for stem friction device or flow limiter
    A  - Alphanumeric digits for customized temperature limiter or embedded noise limiter
    B  - Alphanumeric digits for customized bottom shape
    CD - Alphanumeric digits for handle adaptor or other customization, not in contact 
         with water
[2] Naming convention for ceramic diverter cartridges
    XX - Alphanumeric digits for housing color
    YY - Alphanumeric digits for stem shape
    KK - Alphanumeric digits for stem friction device and/or customized bottom shape
    AB - Alphanumeric digits for position indicator and/or rotation limiter
    CD - Alphanumeric digits for handle adaptor or other customization, not in contact 
         with water



 
SE.FA SRL 
Via del Lavoro, 10
48124 Sant'Alberto 
Italy 
39 544 528784
Visit this company's website


Facility : Ravenna, Italy

Gasket/Sealing Materials Size  
E0A0092 MEMBRANA 50/80 LT CLOROBUTILE N/A      
E0A0258 MEMBRANA 5/8 LT CLOROBUTILE N/A      
E0A0270 MEMBRANA 35/50 LT CLOROBUTILE N/A      
E0B0088 MEMBRANA 24 LT BUTILE N/A      
E0B0095 MEMBRANA 8 LITRI N/A      
E0B0097 MEMBRANA 18/24 LT BUTILE N/A      
E0B0167 MEMBRANA 50 LT BUTILE N/A      
E0B0182 MEMBRANA 35/50 LT BUTILE N/A      
E0B0183 MEMBRANA 35/50 LT BUTILE D.90 N/A      
E0B0200 MEMBRANA 60/80 LT BUTILE D.100 N/A      
E0B0231 MEMBRANA 100/150 LT BUTILE N/A      
E0B0236 MEMBRANA 200/300 LT BUTILE N/A      
E0B0237 MEMBRANA 500/750 LT BUTILE N/A      
E0B0238 MEMBRANA 200/300 LT BUTILE S/F N/A      
E0B0239 MEMBRANA 150/200 LT BUTILE N/A      
E0B0240 MEMBRANA 100/150 LT BUTILE S/F N/A      
E0B0242 MEMBRANA 1000/1500 LT BUTILE N/A      
E0B0244 MEMBRANA 750/1000 LT BUTILE N/A      
E0B0257 MEMBRANA 80/100 LT BUTILE N/A      
E0B0260 MEMBRANA 5/8 LITRI N/A      
E0B0261 MEMBRANA 24 LITRI BUTILE D.90 N/A      
E0B0263 MEMBRANA 2/3 LITRI N/A      
E0B0268 MEMBRANA 12/18 LITRI BUTILE N/A      
E0B0276 MEMBRANA 150/200 LT BUTILE D.150 N/A      
E0N0004 MEMBRANA 8-12 LT N/A      
E0N0005 MEMBRANA 12-18 LT N/A      
E0N0006 MEMBRANA 18-24 LT N/A      
F0A0089 MEMBRANA 24 LT EPDM N/A      
F0A0092 MEMBRANA 50/80 LITRI EPDM N/A      
F0A0160 MEMBRANA 8/12 LT EPDM N/A      
F0A0180 MEMBRANA 35/50 LT EPDM N/A      
F0A0182 MEMBRANA 35/50 LT EPDM D.90 N/A      
F0A0200 MEMBRANA 60/80 LT EPDM D.100 N/A      
F0A0201 MEMBRANA 100 LT EPDM D.100 N/A      
F0A0204 MEMBRANA 18/24 LT EPDM N/A      
F0A0205 MEMBRANA 100 LT EPDM D.100 C/O N/A      
F0A0231 MEMBRANA 100/150 LT EPDM N/A      
F0A0232 MEMBRANA 200/300 LT EPDM N/A      
F0A0233 MEMBRANA 500/750 LT EPDM N/A      
F0A0234 MEMBRANA 100/150 LT EPDM C/O N/A      
F0A0235 MEMBRANA 80/100 LITRI EPDM C/O N/A      
F0A0239 MEMBRANA 150/200 LITRI EPDM N/A      
F0A0240 MEMBRANA 100/150 LITRI EPDM S/F N/A      
F0A0242 MEMBRANA 1000/1500 LT EPDM N/A      
F0A0244 MEMBRANA 750/1000 LT EPDM N/A      
F0A0257 MEMBRANA 80/100 LITRI EPDM N/A      
F0A0258 MEMBRANA 5/8 LITRI EPDM N/A      
F0A0259 MEMBRANA 24 LITRI EPDM D.90 N/A      
F0A0260 MEMBRANA 80/100 LITRI EPDM FORO 22mm N/A      
F0A0261 MEMBRANA 100/150 LITRI EPDM FORO 22mm N/A      
F0A0262 MEMBRANA 200/300 LITRI EPDM S/F N/A      
F0A0263 MEMBRANA 150/200 LITRI EPDM FORO 22mm N/A      
F0A0264 MEMBRANA 2/3 LITRI EPDM N/A      
F0A0265 MEMBRANA 12/18 LT EPDM N/A      
F0A0266 MEMBRANA 150/200 LT EPDM S/F N/A      
F0A0267 MEMBRANA 80/100 LT EPDM S/F N/A      
F0A0268 MEMBRANA 500/750 LITRI EPDM FORO 22mm N/A      
F0A0269 MEMBRANA 12/18 LT EPDM 2,6 mm N/A      
F0A0272 MEMBRANA 24 LT EPDM 2,7 mm N/A      
F0A0273 MEMBRANA 2000/2500 LT EPDM SMALL FLANGE N/A      
F0A0274 MEMBRANA 0,16 LT EPDM N/A      
F0A0275 MEMBRANA 200/300 LT EPDM FORO 22mm N/A      
F0A0276 MEMBRANA 150/200 LT EPDM D.150 N/A      
F0A0277 MEMBRANA 40/60 LT EPDM C/O N/A      
F0A0279 MEMBRANA 2000/2500 LT EPDM MEDIUM FLANGE N/A      
F0A0280 MEMBRANA 2000/2500 LT EPDM BIG FLANGE N/A      
F0A0281 MEMBRANA 3000 LITRI EPDM MEDIUM FLANGE N/A      
F0A0282 MEMBRANA 5000 LT EPDM DOPPIA FL nr 1 + nr 2 N/A      
F0A0283 MEMBRANA 3000 LITRI EPDM BIG FLANGE N/A      
F0A0284 MEMBRANA 500/750 LT EPDM S/F N/A      
F0A0285 MEMBRANA 10.000 LT EPDM DOPPIA FL. 260/313 N/A      
F0A0286 MEMBRANA 5000 LT EPDM BIG FLANGE 313/260 mm N/A      
F0A0288 MEMBRANA 4000 LITRI EPDM BIG FLANGE 313/260 mm N/A      
F0A0290 MEMBRANA 40/60 LT EPDM S/O N/A      
F0A0291 MEMBRANA 5000 LT EPDM DOPPIA FL. nr 1 + nr 3 N/A      
F0A0292 MEMBRANA 5000 LT EPDM DOPPIA FL nr 4 + nr 4 N/A      
F0A0293 MEMBRANA 5000 LT EPDM DOPPIA FL nr 3 + nr 3 N/A      
F0A0294 MEMBRANA 6.000 LT EPDM DOPPIA FL nr 4 + nr 4 N/A      
F0A0297 MEMBRANA 9.000 LT EPDM FLANGIA NR 4 N/A      
F0A0299 MEMBRANA 3.000 LT EPDM DOPPIA FL nr 1 + nr 3 N/A      
F0A0301 MEMBRANA 35/50 LT EPDM C/O N/A      
F0A0302 MEMBRANA 50/80 LT EPDM C/O N/A      
F0A0303 MEMBRANA 80/100 LT EPDM C/O N/A      
F0A0304 MEMBRANA 2000/2500 LT EPDM EXTRA FLANGE N/A      
F0A0305 MEMBRANA 5000 LT EPDM DOPPIA FL. nr 2 + nr 3 N/A      
F0C0089 MEMBRANA 24 LTS EPDM - ACS N/A      
F0C0092 MEMBRANA 50/80 LTS EPDM - ACS N/A      
F0C0180 MEMBRANA 35/50 LTS EPDM - ACS N/A      
F0C0231 MEMBRANA 100/150 LTS EPDM - ACS WITHOUT HOLE N/A      
F0C0232 MEMBRANA 200/300 LTS EPDM - ACS N/A      
F0C0233 MEMBRANA 500/750 LTS EPDM - ACS N/A      
F0C0234 MEMBRANA 100/150 LTS EPDM - ACS WITH HOLE N/A      
F0C0239 MEMBRANA 150/200 LTS EPDM - ACS N/A      
F0C0259 MEMBRANA 24 LTS EPDM D.90- ACS N/A      
F0C0266 MEMBRANA 150/200 LTS EPDM S/F - ACS N/A      
F0C0267 MEMBRANA 80/100 LTS EPDM S/F - ACS N/A      
F0C0276 MEMBRANA 150/200 LT EPDM D.150 - ACS N/A      
FHT0002 MEMBRANA 8/12 LT EPDM HT N/A      
FHT0003 MEMBRANA 2/3 LT EPDM HT N/A      
FHT0004 MEMBRANA 5/8 LT EPDM HT N/A      
FHT0005 MEMBRANA 24 LT EPDM HT N/A      
FHT0006 MEMBRANA 35/50 LT EPDM HT N/A      
FHT0007 MEMBRANA 50/80 LT EPDM HT N/A      
FHT0008 MEMBRANA 150/200 LT EPDM HT S/F N/A      
FHT0009 MEMBRANA 100/150 LT EPDM HT S/F N/A      
FHT0010 MEMBRANA 100/150 LT EPDM HT WITH HOLE N/A      
FHT0011 MEMBRANA 150/200 LT D.150 EPDM HT N/A      
FHT0012 MEMBRANA 100/150 LT EPDM C/O HT N/A      
FHT0013 MEMBRANA 200/300 LT EPDM HT N/A      
FHT0014 MEMBRANA 200/300 LT EPDM HT S/F N/A      
FHT0015 MEMBRANA 500/750 LT EPDM HT N/A      
FHT0030 MEMBRANA 80/100 LT EPDM HT N/A      
FHT0031 MEMBRANA 80/100 LT EPDM HT S/F N/A      
FHT0034 MEMBRANA 12/18 LT EPDM HT N/A      
FHT0204 MEMBRANA 18/24 LT EPDM HT N/A      
Z0A0902 MEMBRANA 300 LITRI EPDM N/A      
Z0A0938 MEMBRANA 300 LITRI BUTILE N/A      



 
Tecnogomma International Spa 
Via Castello, 46
24060 Adrara San Martino (BG) 
Italy 
39 035 933095
Visit this company's website


Facility : Adrara San Martino (BG), Italy

O-Rings Size  
TEC N41-70 [1]      
TECNOGOMMA N1-55 [2]      
TIMO 3-70 [2]      
TIMO 5-70 [2]      
TIMO 7-70 [2]      
TIMO-70 [2]      
WRC-70 [2]      

[1] Certified for a maximum surface area to volume ratio of 1.7 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.



Facility : Palazzolo Sull'Oglio, Italy


Gasket/Sealing Materials Size  
TEC S27 R.-60 Rosso [1]      

[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
O-Rings Size  
TEC S27 R.-60 Rosso [1]      
TEC S27 R.-70 Red [1]      

[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.


Number of matching Manufacturers is 1897
Number of matching Products is 59973
Processing time was 25 seconds