NSF Product and Service Listings
These NSF Official Listings are current as of Saturday, December 21, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/Wastewater/Listings.asp?Standard=046&Company=15770&
NSF/ANSI 46
Evaluation of Components and Devices Used in
Wastewater Treatment Systems
Evaluation of Components and Devices Used in
Wastewater Treatment Systems
Environment/One Corporation | |
2773 Balltown Road | |
Niskayuna, NY 12309-1090 | |
United States | |
518-346-6161 | |
Visit this company's website |
Facility : Niskayuna, NY
Extreme Series - Pump Models |
||||
DH | DR | DX | GH | GR |
IH | KH | Manual[1] | Meter[1] | WH |
WR | WX | |||
[1] Pumps models without level controls attached. |
||||
Extreme Series - Station Models[2] |
||||
DH071 | DH151 | DH152 | DH272[3] | DH502[3] |
DR071 | DR151 | DR152 | DR272[3] | DR502[3] |
IH091 | UPGRADE H[4] | UPGRADE R[4] | WH101[5] | WH231[3] |
WH471[3] | WH472[3] | WH482[3] | WR101[5] | WR231[3] |
WR471[3] | WR472[3] | WR482[3] | ||
[2] Models also accepted with a prefix C (designates Canadian core) or suffix A (designates 120 v motor option). Models with suffix designations 36 thru 174 indicate the station height (inches). [3] Certification is for the grinder pump only and does not include the basin. [4] For installation into existing centrifugal grinder pump stations or sumps. [5] Certification includes the HDPE basin only. |
||||
Special Device - Grinder Pump Models Farrell[2] |
||||
AMGP-1 (240 volt)[4] | AMGP-2 (200 volt)[4] | GP1000 | GP2000 | GP2010 |
GP2012 | GP2014 | GP2015 | GP2016 | IDU |
WH171 | WH483 | WH484 | WR171 | WR483 |
WR484 | ||||
[2] Models also accepted with a prefix C (designates Canadian core) or suffix A (designates 120 v motor option). Models with suffix designations 36 thru 174 indicate the station height (inches). [4] For installation into existing centrifugal grinder pump stations or sumps. |
Number of matching Manufacturers is 1
Number of matching Products is 51
Processing time was 0 seconds