NSF Product and Service Listings

These NSF Official Listings are current as of Thursday, January 15, 2026 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/food/Listings.asp?Standard=002&Company=0K160&

NSF/ANSI 2
Food Equipment


 
Cooper Lighting, LLC 
1121 Highway 74 South
Peachtree City, GA 30269 
United States 
770-486-4328
Visit this company's website

Facility : Americus, GA


FCZ Light Fixture for Splash and Non-food Zone[1]
  (1)(2)FCZ2-(3)-(4)-(5)-(6)-(7)-(8)-(9)-(10)-(11)-(12)
  
[1] (1) Width in Inches    
    (2) Length in Feet    
    (3) Lumen Output:  
        High Efficacy - xxHE where xx represents Lumen Output
        Standard Efficacy - xx where xx represents Lumen Output     
    (4) Input Voltage:  UNV or 347V    
    (5) CRI/CCT:  
        L830 - 80CRI, 3000K
        L835 - 80CRI, 3500K
        L840 - 80CRI, 4000K
        L850 - 80CRI, 5000K
        L83050 - 80CRI 3000K-5000K White Tuning
        L82765 - 80CRI 2700K-6500K White Tuning     
    (6) Diffuser:  Blank (No Diffuser), RDP, S, CLSC, BRDR or CURV    
    (7) Bottom Lens:  
        CA08  - 0.080" Clear Acrylic
        CA125 - 0.125" Clear Acrylic 
        CP125 - Clear Polycarbonate 0.125", 
        CP187 - Clear Polycarbonate 0.187"
        CP250 - Clear Polycarbonate 0.250"    
    (8) Driver Type:  CD, HCD, 5LTD, 5HTLD, SD, LH, W2A    
    (9) Number of Drivers: 1 or 2    
    (10) Options Emergency:   EL7W, EL14W, GTR2 or ETRD; AND AM - Antimicrobial Finish    
    (11) Integrated Sensing Sytems:   Blank (No Sensor), SWPD1, SDWPD1, LWIPD1, LDWIPD1, 
         LWTPD1, SLVPD1, SDLVPD1, SVPD1 or SDVPD1
    (12) Packaging: U - Units

Fail-Safe Sealed Luminaire for Splash Zone & Non-Food Zone
  EN-(1)-(2)-(3)-(4)-(5)-(6)-(7)-(8)-(9)-(10)[21]
  
[21] (1) Indicates Type		
         W - indicates Wet Location, Wipe Down, Sealed		
         C - indicates Clean Room Rated, Wet Location		
         V - indicates Vandal Resistant			
     (2) indicates Width in inches: 12 or 24			
     (3) indicates length in feet: 2 or 4		
     (4) indicates LED Type 2.0		
     (5) indicates Lumen Output		
         13 - 1300 Lumens 		
         17 - 1700 Lumens		
         25 - 2500 Lumens		
         27 - 2700 Lumens		
         28 - 2800 Lumens		
         33 - 3300 Lumens		
         34 - 3400 Lumens		
         35 - 3500 Lumens		
         39 - 3900 Lumens		
         43 - 4300 Lumen		
         45 - 4500 Lumens		
         54 - 5400 Lumens		
         67 - 6700 Lumens		
         70 - 7000 Lumens			
     (6) indicates Color Temperature		
         30 - 3000K		
         35 - 3500K		
         40 - 4000K		
         50 - 5000K		
         2765 - White Tuning, 2700K-6500K		
         3050 - White Tuning, 3000K-5000K		
     (7) indicates Lens		
         CA08 - Clear Acrylic, 0.080" Thick		
         CA125 - Clear Acrylic, 0.125" Thick		
         CP125 - Clear Polycarbonate, 0.125" Thick		
         CP187 - Clear Polycarbonate, 0.187" Thick		
         CP250 - Clear Polycarbonate, 0.250" Thick		
     (8) indicates Voltage		
         UNV - Universay Voltage 120-277V
     (9) indicates Driver & number of Drivers		
         EDC1 - Electronic Driver, Single Circuit, Non-Dimming		
         EDD - Electronic Driver, 0-10V Dimming,10%		
         W2A - White Tuning, 2ch, Intensity and CCT Control 	
     (10) Available with  the following options		
         EL7W=Emergency Driver, 7W 		
         EL14W=Emergency Driver, 14W 		
         GTR2=Bodine Generator Transfer Relay		
         ETRD=Iota Emergency Transfer Relay with dimming control		
         CP=CCEA Compliant 		
         GSK/GRD=Gasket around perimeter of bottom edge of lens to seal between the fixture
     and T-Grid		
     (standard on ENC)		
         GSK/HSG=Gasket on back side of housing (standard on ENC)		
         HS=High Security (ENV only). For use in behavioral high-risk areas, ligature
     resistant. Steel frame is attached to housing, tamper resistant hardware, and minimum
     0.250" clear polycarbonate lens (DFVR accessory not required with HS option)
         90=90CRI

Fail-Safe Brand Downlighting for Splash & Nonfood Food Zones

4" SQUARE DOWNLIGHT[2]
  F4LC-SQ-SM(8)(9)(10)(11)(12)
  F4LC-SQW-SM(8)(9)(10)(11)(12)
  FEU4C(5)6)(7)
  FLDSQ4C-SM(1)(2)(3)(4)(8)
  
[2] (1)  FLDSQ4C-SM - 4" Square, Sealed/Medical Housing  				
    (2)  Delivered Lumens - 250-7500 				
    (3)  Driver - 3 to 12 digits suffix, options: D010, DE010, D5LT, 1DL2, DLE, DE010-W2N,
    D5LT-W2N				
    (4)  Options - IEMBOD, EM7, IEM7, EM14, IEM14, IEMBOD, ETRD				
    (5)  Lumen Level - 0208IC, 1020, 1015IC, 2540, 4560, 4075, 08259030D2W, 35459030D2W,
    1030W2N902765,
         1030W2N902050, 35W2N902765, 35W2N902050							
    (6)  CRI - 90 or 97				
    (7)  Color Temp options - 2400K, 2700K, 3000K, 3500K, 4000K, 5000K				
    (8)  Trim/Reflector - Sealed/Medical (SM) - anodized aluminum retained with two torsion
    springs  				
    (9)  Trim/Reflector options - SQ -square anodized aluminum, SQW - square wide anodized
    aluminum;  				
    (10) Trim/Reflector Finish options - LI - specular clear; H - semi-specular clear, WMH -
    warm haze, WH - wheat,
         GPH - graphite haze, MW - matte white				
    (11) 1 - Self-Flanged; 2 - White painted self flanged 				
    (12) E - Integral Emergency Test Switch Hole

MRI-FLD4 & MRI-FLD6[3]
  MRI-DRV (5)
  MRI-DRV (5)
  MRI-F4LC(8) (9) (10)
  MRI-F6LC (8) (9) (10)
  MRI-FEU4C (2)(4)
  MRI-FEU6C(3)(4)
  MRI-FLD4(1)
  MRI-FLD6(1)
  MRI-RDE (7)
  MRI-RDE (7)
  MRI-RF (6)
  MRI-RF (6)
  
[3] (1)  MRI-FLD4 - 4"round MRI Downlight, Non-ferrous housing,
         MRI-FLD6 - 6"round MRI Downlight, Non-ferrous housing,    				
    (2)  Lumens levels -  500 - 2500 				
    (3)  Lumens levels - 1000 - 4000
    (4)  Cri & Color Temp - 90 cri and color temp options - 4 digit suffix
    (5)  Driver - Dimming or Dali;  Voltage - UNV or 347;  Lumens;  1 - Driver powers 1
    Luminiare,
         2 - Driver powers 2 Luminiares, 3 - Driver powers 3 Luminiares
    (6)  RF2 - 1 or 2 Channel Filter; RF3 - 3 Channel Filter; RF4 - 4 Channel Filter;				
    (7)  Remote driver Enclosure (Galvanized Steel)				
    (8)  Reflector Distribution
         M - Medium 50 beam; W - Wide; SW - Single Wall Wash
    (9)  Flange type -
         1 - Self-flanged
         2 - White Painted Self-flanged 				
    (10) Reflector Finish -
         LI - Specular clear; H - Semi-Specular clear; WMH - Warm Haze; 
         AMF - Antimicrobial Matte White; GW - Gloss White

Sealed Bottom Trim or Bottom Lens[4]
  F4LB(1)(8)(9)(10)(11)(12)(13)
  
[4] (1)  Blank     - Sealed Medical 
         Open or X - Sealed Medical W/Bottom Trim/Lens or Vandal Resistant    
    (2)  Delivered Lumens: 1000, 1500, 2000, 3000, 4000, 5000, 6000, & 7000    
    (3)  Driver: 3 to 6 digit suffix    
    (4)  Options: May be IEMBOD or Blank + FP    
    (5)  Lumen Level: 1/2 (1000, 1500, 2000), 3/5 (3000, 4000, 5000), 6/7 (6000, 7000), 
         109030D2W (1000L, 90CRI, DIM 2 WARM), 159030D2W (1500L, 90 CRI, DIM 2 WARM), 
         209030D2W (2000L, 90CRI, DIM 2 WARM)    
    (6)  CRI: 8, 9, or 97    
    (7)  Color Temp: 4 digit suffix    
    (8)  V - Vandal Resistant w/Torx Screws
         S - Sealed Medical w/Phillips Head Screws    
    (9)  Reflector Light Distribution: 
         M  - Medium, 50°
         SW - Single Wall Wash    
    (10) Flange Type: 
         1 - Self Flanged
         2 - White Painted Flange    
    (11) Reflector Finish    
    (12) Option: Integral Emergency Test Switch Hole or Blank    
    (13) Option: Bottom Lens or Bottom Trim w/lens (Bottom Trim available on 6" only)

Sealed Bottom Trim or Bottom Lens[5]
  F4LCXS(8)(9) (10)(11)(12)(13)
  
[5] (1)  Blank - Sealed Medical, Open (FLD6C or FLD4C);
         X - Sealed Medical W/Bottom Trim/Lens  (FLD6CX or  FLD4CX);
         FLD6X/OR=Sealed Medical Operating Room, w/BottomTrim/Lens 				
    (2)  Delivered Lumens -   FLD6= 250 -12,000;    FLD4= 250-6,000;    
    FLD6X/OR=250-7000				
    (3)  Driver - 3 to 12 digits - D010, DE010, D5LT, 1DL2, DLE, DE010-W2N, D5LT-W2N				
    (4)  Options - May be IEMBOD, EM7, IEM7, EM14, IEM14, IEMBOD, ETRD
    (5)  Lumen Level - 0208IC, 1020, 1015IC, 2540, 4560, 4060, 08259030D2W, 35459030D2W,
         1030W2N902765, 1030W2N902050, 35W2N902765, 35W2N902050				
    (6)  CRI - 90 or 97				
    (7)  Color Temp - 2400K, 2700K, 3000K, 3500K, 4000K,5000K				
    (8)  Trim/Reflectors are spun aluminum.  F6LC & F4LC - Sealed Medical Open, utilizing
         torsion springs;   F6LCXS, F6LCX/OR,& F4LCXS =Sealed Medical Enclosed, utilizing
         phillips head screws 
         Options -  M - Medium 50°beam, W - Wide, SW - Single Wall Wash, N - Narrow - (W,
    SW,
         & N options are only applicable in Sealed/Medical Open) 				
    (9)  Flange Type - 1 - Self Flanged (self flanged finish is same as the reflector
    finish)				
    (10) Flange Type - 2 - White Painted Flange
    (11) Trim/Reflector Finish - LI - specular clear; H - semi-specular clear, WMH - warm
    haze,
         MW - matte white, AMF - antimicrobial matte white, GW - gloss white				
    (12) Option - E - Integral Emergency Test Switch Hole				
    (13) Option - BL84, BL85 ,BL86, BL89AM, BL89BV (BL - Bottom Lens,  polycarbonate or
    acrylic
         lens options 84, 85, 86, 89AM, 89BV) 				
    (14) Option - BTR84, BTR85, BTR86, BTR89BV (BTR -Bottom Trim Ring and polycarbonate or
    acrylic
         lens options 84, 85, 96, 89BV)

Sealed Bottom Trim or Bottom Lens[4]
  F6LB(1)(9)(9)(10)(11)(12)(13)
  
[4] (1)  Blank     - Sealed Medical 
         Open or X - Sealed Medical W/Bottom Trim/Lens or Vandal Resistant    
    (2)  Delivered Lumens: 1000, 1500, 2000, 3000, 4000, 5000, 6000, & 7000    
    (3)  Driver: 3 to 6 digit suffix    
    (4)  Options: May be IEMBOD or Blank + FP    
    (5)  Lumen Level: 1/2 (1000, 1500, 2000), 3/5 (3000, 4000, 5000), 6/7 (6000, 7000), 
         109030D2W (1000L, 90CRI, DIM 2 WARM), 159030D2W (1500L, 90 CRI, DIM 2 WARM), 
         209030D2W (2000L, 90CRI, DIM 2 WARM)    
    (6)  CRI: 8, 9, or 97    
    (7)  Color Temp: 4 digit suffix    
    (8)  V - Vandal Resistant w/Torx Screws
         S - Sealed Medical w/Phillips Head Screws    
    (9)  Reflector Light Distribution: 
         M  - Medium, 50°
         SW - Single Wall Wash    
    (10) Flange Type: 
         1 - Self Flanged
         2 - White Painted Flange    
    (11) Reflector Finish    
    (12) Option: Integral Emergency Test Switch Hole or Blank    
    (13) Option: Bottom Lens or Bottom Trim w/lens (Bottom Trim available on 6" only)

Sealed Bottom Trim or Bottom Lens[5]
  F6LCX/OR(8)(9)(10)(11)(12)(14)
  F6LCXS(8)(9)(10)(11)(12)(13)(14)
  
[5] (1)  Blank - Sealed Medical, Open (FLD6C or FLD4C);
         X - Sealed Medical W/Bottom Trim/Lens  (FLD6CX or  FLD4CX);
         FLD6X/OR=Sealed Medical Operating Room, w/BottomTrim/Lens 				
    (2)  Delivered Lumens -   FLD6= 250 -12,000;    FLD4= 250-6,000;    
    FLD6X/OR=250-7000				
    (3)  Driver - 3 to 12 digits - D010, DE010, D5LT, 1DL2, DLE, DE010-W2N, D5LT-W2N				
    (4)  Options - May be IEMBOD, EM7, IEM7, EM14, IEM14, IEMBOD, ETRD
    (5)  Lumen Level - 0208IC, 1020, 1015IC, 2540, 4560, 4060, 08259030D2W, 35459030D2W,
         1030W2N902765, 1030W2N902050, 35W2N902765, 35W2N902050				
    (6)  CRI - 90 or 97				
    (7)  Color Temp - 2400K, 2700K, 3000K, 3500K, 4000K,5000K				
    (8)  Trim/Reflectors are spun aluminum.  F6LC & F4LC - Sealed Medical Open, utilizing
         torsion springs;   F6LCXS, F6LCX/OR,& F4LCXS =Sealed Medical Enclosed, utilizing
         phillips head screws 
         Options -  M - Medium 50°beam, W - Wide, SW - Single Wall Wash, N - Narrow - (W,
    SW,
         & N options are only applicable in Sealed/Medical Open) 				
    (9)  Flange Type - 1 - Self Flanged (self flanged finish is same as the reflector
    finish)				
    (10) Flange Type - 2 - White Painted Flange
    (11) Trim/Reflector Finish - LI - specular clear; H - semi-specular clear, WMH - warm
    haze,
         MW - matte white, AMF - antimicrobial matte white, GW - gloss white				
    (12) Option - E - Integral Emergency Test Switch Hole				
    (13) Option - BL84, BL85 ,BL86, BL89AM, BL89BV (BL - Bottom Lens,  polycarbonate or
    acrylic
         lens options 84, 85, 86, 89AM, 89BV) 				
    (14) Option - BTR84, BTR85, BTR86, BTR89BV (BTR -Bottom Trim Ring and polycarbonate or
    acrylic
         lens options 84, 85, 96, 89BV)

Sealed Bottom Trim or Bottom Lens[4]
  FEU4B(5)(6)(7)
  
[4] (1)  Blank     - Sealed Medical 
         Open or X - Sealed Medical W/Bottom Trim/Lens or Vandal Resistant    
    (2)  Delivered Lumens: 1000, 1500, 2000, 3000, 4000, 5000, 6000, & 7000    
    (3)  Driver: 3 to 6 digit suffix    
    (4)  Options: May be IEMBOD or Blank + FP    
    (5)  Lumen Level: 1/2 (1000, 1500, 2000), 3/5 (3000, 4000, 5000), 6/7 (6000, 7000), 
         109030D2W (1000L, 90CRI, DIM 2 WARM), 159030D2W (1500L, 90 CRI, DIM 2 WARM), 
         209030D2W (2000L, 90CRI, DIM 2 WARM)    
    (6)  CRI: 8, 9, or 97    
    (7)  Color Temp: 4 digit suffix    
    (8)  V - Vandal Resistant w/Torx Screws
         S - Sealed Medical w/Phillips Head Screws    
    (9)  Reflector Light Distribution: 
         M  - Medium, 50°
         SW - Single Wall Wash    
    (10) Flange Type: 
         1 - Self Flanged
         2 - White Painted Flange    
    (11) Reflector Finish    
    (12) Option: Integral Emergency Test Switch Hole or Blank    
    (13) Option: Bottom Lens or Bottom Trim w/lens (Bottom Trim available on 6" only)

Sealed Bottom Trim or Bottom Lens[5]
  FEU4C(5)(6)(7)
  
[5] (1)  Blank - Sealed Medical, Open (FLD6C or FLD4C);
         X - Sealed Medical W/Bottom Trim/Lens  (FLD6CX or  FLD4CX);
         FLD6X/OR=Sealed Medical Operating Room, w/BottomTrim/Lens 				
    (2)  Delivered Lumens -   FLD6= 250 -12,000;    FLD4= 250-6,000;    
    FLD6X/OR=250-7000				
    (3)  Driver - 3 to 12 digits - D010, DE010, D5LT, 1DL2, DLE, DE010-W2N, D5LT-W2N				
    (4)  Options - May be IEMBOD, EM7, IEM7, EM14, IEM14, IEMBOD, ETRD
    (5)  Lumen Level - 0208IC, 1020, 1015IC, 2540, 4560, 4060, 08259030D2W, 35459030D2W,
         1030W2N902765, 1030W2N902050, 35W2N902765, 35W2N902050				
    (6)  CRI - 90 or 97				
    (7)  Color Temp - 2400K, 2700K, 3000K, 3500K, 4000K,5000K				
    (8)  Trim/Reflectors are spun aluminum.  F6LC & F4LC - Sealed Medical Open, utilizing
         torsion springs;   F6LCXS, F6LCX/OR,& F4LCXS =Sealed Medical Enclosed, utilizing
         phillips head screws 
         Options -  M - Medium 50°beam, W - Wide, SW - Single Wall Wash, N - Narrow - (W,
    SW,
         & N options are only applicable in Sealed/Medical Open) 				
    (9)  Flange Type - 1 - Self Flanged (self flanged finish is same as the reflector
    finish)				
    (10) Flange Type - 2 - White Painted Flange
    (11) Trim/Reflector Finish - LI - specular clear; H - semi-specular clear, WMH - warm
    haze,
         MW - matte white, AMF - antimicrobial matte white, GW - gloss white				
    (12) Option - E - Integral Emergency Test Switch Hole				
    (13) Option - BL84, BL85 ,BL86, BL89AM, BL89BV (BL - Bottom Lens,  polycarbonate or
    acrylic
         lens options 84, 85, 86, 89AM, 89BV) 				
    (14) Option - BTR84, BTR85, BTR86, BTR89BV (BTR -Bottom Trim Ring and polycarbonate or
    acrylic
         lens options 84, 85, 96, 89BV)

Sealed Bottom Trim or Bottom Lens[4]
  FEU6B(5)(6)(7)
  
[4] (1)  Blank     - Sealed Medical 
         Open or X - Sealed Medical W/Bottom Trim/Lens or Vandal Resistant    
    (2)  Delivered Lumens: 1000, 1500, 2000, 3000, 4000, 5000, 6000, & 7000    
    (3)  Driver: 3 to 6 digit suffix    
    (4)  Options: May be IEMBOD or Blank + FP    
    (5)  Lumen Level: 1/2 (1000, 1500, 2000), 3/5 (3000, 4000, 5000), 6/7 (6000, 7000), 
         109030D2W (1000L, 90CRI, DIM 2 WARM), 159030D2W (1500L, 90 CRI, DIM 2 WARM), 
         209030D2W (2000L, 90CRI, DIM 2 WARM)    
    (6)  CRI: 8, 9, or 97    
    (7)  Color Temp: 4 digit suffix    
    (8)  V - Vandal Resistant w/Torx Screws
         S - Sealed Medical w/Phillips Head Screws    
    (9)  Reflector Light Distribution: 
         M  - Medium, 50°
         SW - Single Wall Wash    
    (10) Flange Type: 
         1 - Self Flanged
         2 - White Painted Flange    
    (11) Reflector Finish    
    (12) Option: Integral Emergency Test Switch Hole or Blank    
    (13) Option: Bottom Lens or Bottom Trim w/lens (Bottom Trim available on 6" only)

Sealed Bottom Trim or Bottom Lens[5]
  FEU6C(5)(6)(7)
  
[5] (1)  Blank - Sealed Medical, Open (FLD6C or FLD4C);
         X - Sealed Medical W/Bottom Trim/Lens  (FLD6CX or  FLD4CX);
         FLD6X/OR=Sealed Medical Operating Room, w/BottomTrim/Lens 				
    (2)  Delivered Lumens -   FLD6= 250 -12,000;    FLD4= 250-6,000;    
    FLD6X/OR=250-7000				
    (3)  Driver - 3 to 12 digits - D010, DE010, D5LT, 1DL2, DLE, DE010-W2N, D5LT-W2N				
    (4)  Options - May be IEMBOD, EM7, IEM7, EM14, IEM14, IEMBOD, ETRD
    (5)  Lumen Level - 0208IC, 1020, 1015IC, 2540, 4560, 4060, 08259030D2W, 35459030D2W,
         1030W2N902765, 1030W2N902050, 35W2N902765, 35W2N902050				
    (6)  CRI - 90 or 97				
    (7)  Color Temp - 2400K, 2700K, 3000K, 3500K, 4000K,5000K				
    (8)  Trim/Reflectors are spun aluminum.  F6LC & F4LC - Sealed Medical Open, utilizing
         torsion springs;   F6LCXS, F6LCX/OR,& F4LCXS =Sealed Medical Enclosed, utilizing
         phillips head screws 
         Options -  M - Medium 50°beam, W - Wide, SW - Single Wall Wash, N - Narrow - (W,
    SW,
         & N options are only applicable in Sealed/Medical Open) 				
    (9)  Flange Type - 1 - Self Flanged (self flanged finish is same as the reflector
    finish)				
    (10) Flange Type - 2 - White Painted Flange
    (11) Trim/Reflector Finish - LI - specular clear; H - semi-specular clear, WMH - warm
    haze,
         MW - matte white, AMF - antimicrobial matte white, GW - gloss white				
    (12) Option - E - Integral Emergency Test Switch Hole				
    (13) Option - BL84, BL85 ,BL86, BL89AM, BL89BV (BL - Bottom Lens,  polycarbonate or
    acrylic
         lens options 84, 85, 86, 89AM, 89BV) 				
    (14) Option - BTR84, BTR85, BTR86, BTR89BV (BTR -Bottom Trim Ring and polycarbonate or
    acrylic
         lens options 84, 85, 96, 89BV)

Sealed Bottom Trim or Bottom Lens[4]
  FLD4B(1)(2)(3)(4)
  
[4] (1)  Blank     - Sealed Medical 
         Open or X - Sealed Medical W/Bottom Trim/Lens or Vandal Resistant    
    (2)  Delivered Lumens: 1000, 1500, 2000, 3000, 4000, 5000, 6000, & 7000    
    (3)  Driver: 3 to 6 digit suffix    
    (4)  Options: May be IEMBOD or Blank + FP    
    (5)  Lumen Level: 1/2 (1000, 1500, 2000), 3/5 (3000, 4000, 5000), 6/7 (6000, 7000), 
         109030D2W (1000L, 90CRI, DIM 2 WARM), 159030D2W (1500L, 90 CRI, DIM 2 WARM), 
         209030D2W (2000L, 90CRI, DIM 2 WARM)    
    (6)  CRI: 8, 9, or 97    
    (7)  Color Temp: 4 digit suffix    
    (8)  V - Vandal Resistant w/Torx Screws
         S - Sealed Medical w/Phillips Head Screws    
    (9)  Reflector Light Distribution: 
         M  - Medium, 50°
         SW - Single Wall Wash    
    (10) Flange Type: 
         1 - Self Flanged
         2 - White Painted Flange    
    (11) Reflector Finish    
    (12) Option: Integral Emergency Test Switch Hole or Blank    
    (13) Option: Bottom Lens or Bottom Trim w/lens (Bottom Trim available on 6" only)

Sealed Bottom Trim or Bottom Lens[5]
  FLD4C(1)(2)(3)(4)
  
[5] (1)  Blank - Sealed Medical, Open (FLD6C or FLD4C);
         X - Sealed Medical W/Bottom Trim/Lens  (FLD6CX or  FLD4CX);
         FLD6X/OR=Sealed Medical Operating Room, w/BottomTrim/Lens 				
    (2)  Delivered Lumens -   FLD6= 250 -12,000;    FLD4= 250-6,000;    
    FLD6X/OR=250-7000				
    (3)  Driver - 3 to 12 digits - D010, DE010, D5LT, 1DL2, DLE, DE010-W2N, D5LT-W2N				
    (4)  Options - May be IEMBOD, EM7, IEM7, EM14, IEM14, IEMBOD, ETRD
    (5)  Lumen Level - 0208IC, 1020, 1015IC, 2540, 4560, 4060, 08259030D2W, 35459030D2W,
         1030W2N902765, 1030W2N902050, 35W2N902765, 35W2N902050				
    (6)  CRI - 90 or 97				
    (7)  Color Temp - 2400K, 2700K, 3000K, 3500K, 4000K,5000K				
    (8)  Trim/Reflectors are spun aluminum.  F6LC & F4LC - Sealed Medical Open, utilizing
         torsion springs;   F6LCXS, F6LCX/OR,& F4LCXS =Sealed Medical Enclosed, utilizing
         phillips head screws 
         Options -  M - Medium 50°beam, W - Wide, SW - Single Wall Wash, N - Narrow - (W,
    SW,
         & N options are only applicable in Sealed/Medical Open) 				
    (9)  Flange Type - 1 - Self Flanged (self flanged finish is same as the reflector
    finish)				
    (10) Flange Type - 2 - White Painted Flange
    (11) Trim/Reflector Finish - LI - specular clear; H - semi-specular clear, WMH - warm
    haze,
         MW - matte white, AMF - antimicrobial matte white, GW - gloss white				
    (12) Option - E - Integral Emergency Test Switch Hole				
    (13) Option - BL84, BL85 ,BL86, BL89AM, BL89BV (BL - Bottom Lens,  polycarbonate or
    acrylic
         lens options 84, 85, 86, 89AM, 89BV) 				
    (14) Option - BTR84, BTR85, BTR86, BTR89BV (BTR -Bottom Trim Ring and polycarbonate or
    acrylic
         lens options 84, 85, 96, 89BV)

Sealed Bottom Trim or Bottom Lens[4]
  FLD6B(1)(2)(3)(4)
  
[4] (1)  Blank     - Sealed Medical 
         Open or X - Sealed Medical W/Bottom Trim/Lens or Vandal Resistant    
    (2)  Delivered Lumens: 1000, 1500, 2000, 3000, 4000, 5000, 6000, & 7000    
    (3)  Driver: 3 to 6 digit suffix    
    (4)  Options: May be IEMBOD or Blank + FP    
    (5)  Lumen Level: 1/2 (1000, 1500, 2000), 3/5 (3000, 4000, 5000), 6/7 (6000, 7000), 
         109030D2W (1000L, 90CRI, DIM 2 WARM), 159030D2W (1500L, 90 CRI, DIM 2 WARM), 
         209030D2W (2000L, 90CRI, DIM 2 WARM)    
    (6)  CRI: 8, 9, or 97    
    (7)  Color Temp: 4 digit suffix    
    (8)  V - Vandal Resistant w/Torx Screws
         S - Sealed Medical w/Phillips Head Screws    
    (9)  Reflector Light Distribution: 
         M  - Medium, 50°
         SW - Single Wall Wash    
    (10) Flange Type: 
         1 - Self Flanged
         2 - White Painted Flange    
    (11) Reflector Finish    
    (12) Option: Integral Emergency Test Switch Hole or Blank    
    (13) Option: Bottom Lens or Bottom Trim w/lens (Bottom Trim available on 6" only)

Sealed Bottom Trim or Bottom Lens[5]
  FLD6C(1)(2)(3)(4)
  
[5] (1)  Blank - Sealed Medical, Open (FLD6C or FLD4C);
         X - Sealed Medical W/Bottom Trim/Lens  (FLD6CX or  FLD4CX);
         FLD6X/OR=Sealed Medical Operating Room, w/BottomTrim/Lens 				
    (2)  Delivered Lumens -   FLD6= 250 -12,000;    FLD4= 250-6,000;    
    FLD6X/OR=250-7000				
    (3)  Driver - 3 to 12 digits - D010, DE010, D5LT, 1DL2, DLE, DE010-W2N, D5LT-W2N				
    (4)  Options - May be IEMBOD, EM7, IEM7, EM14, IEM14, IEMBOD, ETRD
    (5)  Lumen Level - 0208IC, 1020, 1015IC, 2540, 4560, 4060, 08259030D2W, 35459030D2W,
         1030W2N902765, 1030W2N902050, 35W2N902765, 35W2N902050				
    (6)  CRI - 90 or 97				
    (7)  Color Temp - 2400K, 2700K, 3000K, 3500K, 4000K,5000K				
    (8)  Trim/Reflectors are spun aluminum.  F6LC & F4LC - Sealed Medical Open, utilizing
         torsion springs;   F6LCXS, F6LCX/OR,& F4LCXS =Sealed Medical Enclosed, utilizing
         phillips head screws 
         Options -  M - Medium 50°beam, W - Wide, SW - Single Wall Wash, N - Narrow - (W,
    SW,
         & N options are only applicable in Sealed/Medical Open) 				
    (9)  Flange Type - 1 - Self Flanged (self flanged finish is same as the reflector
    finish)				
    (10) Flange Type - 2 - White Painted Flange
    (11) Trim/Reflector Finish - LI - specular clear; H - semi-specular clear, WMH - warm
    haze,
         MW - matte white, AMF - antimicrobial matte white, GW - gloss white				
    (12) Option - E - Integral Emergency Test Switch Hole				
    (13) Option - BL84, BL85 ,BL86, BL89AM, BL89BV (BL - Bottom Lens,  polycarbonate or
    acrylic
         lens options 84, 85, 86, 89AM, 89BV) 				
    (14) Option - BTR84, BTR85, BTR86, BTR89BV (BTR -Bottom Trim Ring and polycarbonate or
    acrylic
         lens options 84, 85, 96, 89BV)

Sealed Flush Lens[6]
  BL84
  FERM4A-(4)-(5)-(6)
  FERM6A-(4)-(5)-(6)
  FFLD6A-(1)-(2)-(3)
  FLD4AX-(1)-(2)-(3)
  FSBT6-(8)-(9)
  FV-S4XLM1-(7)
  FV/S6LM0-(7)
  
[6] (1) Delivered Lumens: 09, 10, 13, 15, 18, 20, 30				
    (2) Driver: 3 to 6 digit suffix				
    (3) Options: May be IEMBOD or Blank				
    (4) Power Module: 09, 10, 13, 15, 18, 20, 30				
    (5) CRI: 8 or 9				
    (6) Color Temp: 2 or 4 digit suffix				
    (7) Reflector Finish: LI, h, wmh, w				
    (8) Lens: 80, 84, 85, 89am, 93, 94, 89BV or 89BI				
    (9) Accessories: HB26, HB50, RMB, H347, H347200

Sealed Open Lens[4]
  F4LB(1)(8)(9)(10)(11)(12)
  
[4] (1)  Blank     - Sealed Medical 
         Open or X - Sealed Medical W/Bottom Trim/Lens or Vandal Resistant    
    (2)  Delivered Lumens: 1000, 1500, 2000, 3000, 4000, 5000, 6000, & 7000    
    (3)  Driver: 3 to 6 digit suffix    
    (4)  Options: May be IEMBOD or Blank + FP    
    (5)  Lumen Level: 1/2 (1000, 1500, 2000), 3/5 (3000, 4000, 5000), 6/7 (6000, 7000), 
         109030D2W (1000L, 90CRI, DIM 2 WARM), 159030D2W (1500L, 90 CRI, DIM 2 WARM), 
         209030D2W (2000L, 90CRI, DIM 2 WARM)    
    (6)  CRI: 8, 9, or 97    
    (7)  Color Temp: 4 digit suffix    
    (8)  V - Vandal Resistant w/Torx Screws
         S - Sealed Medical w/Phillips Head Screws    
    (9)  Reflector Light Distribution: 
         M  - Medium, 50°
         SW - Single Wall Wash    
    (10) Flange Type: 
         1 - Self Flanged
         2 - White Painted Flange    
    (11) Reflector Finish    
    (12) Option: Integral Emergency Test Switch Hole or Blank    
    (13) Option: Bottom Lens or Bottom Trim w/lens (Bottom Trim available on 6" only)

Sealed Open Lens[5]
  F4LC(8)(9)(10)(11)(12)
  
[5] (1)  Blank - Sealed Medical, Open (FLD6C or FLD4C);
         X - Sealed Medical W/Bottom Trim/Lens  (FLD6CX or  FLD4CX);
         FLD6X/OR=Sealed Medical Operating Room, w/BottomTrim/Lens 				
    (2)  Delivered Lumens -   FLD6= 250 -12,000;    FLD4= 250-6,000;    
    FLD6X/OR=250-7000				
    (3)  Driver - 3 to 12 digits - D010, DE010, D5LT, 1DL2, DLE, DE010-W2N, D5LT-W2N				
    (4)  Options - May be IEMBOD, EM7, IEM7, EM14, IEM14, IEMBOD, ETRD
    (5)  Lumen Level - 0208IC, 1020, 1015IC, 2540, 4560, 4060, 08259030D2W, 35459030D2W,
         1030W2N902765, 1030W2N902050, 35W2N902765, 35W2N902050				
    (6)  CRI - 90 or 97				
    (7)  Color Temp - 2400K, 2700K, 3000K, 3500K, 4000K,5000K				
    (8)  Trim/Reflectors are spun aluminum.  F6LC & F4LC - Sealed Medical Open, utilizing
         torsion springs;   F6LCXS, F6LCX/OR,& F4LCXS =Sealed Medical Enclosed, utilizing
         phillips head screws 
         Options -  M - Medium 50°beam, W - Wide, SW - Single Wall Wash, N - Narrow - (W,
    SW,
         & N options are only applicable in Sealed/Medical Open) 				
    (9)  Flange Type - 1 - Self Flanged (self flanged finish is same as the reflector
    finish)				
    (10) Flange Type - 2 - White Painted Flange
    (11) Trim/Reflector Finish - LI - specular clear; H - semi-specular clear, WMH - warm
    haze,
         MW - matte white, AMF - antimicrobial matte white, GW - gloss white				
    (12) Option - E - Integral Emergency Test Switch Hole				
    (13) Option - BL84, BL85 ,BL86, BL89AM, BL89BV (BL - Bottom Lens,  polycarbonate or
    acrylic
         lens options 84, 85, 86, 89AM, 89BV) 				
    (14) Option - BTR84, BTR85, BTR86, BTR89BV (BTR -Bottom Trim Ring and polycarbonate or
    acrylic
         lens options 84, 85, 96, 89BV)

Sealed Open Lens[4]
  F6LB(1)(8)(9)(10)(11)(12)
  
[4] (1)  Blank     - Sealed Medical 
         Open or X - Sealed Medical W/Bottom Trim/Lens or Vandal Resistant    
    (2)  Delivered Lumens: 1000, 1500, 2000, 3000, 4000, 5000, 6000, & 7000    
    (3)  Driver: 3 to 6 digit suffix    
    (4)  Options: May be IEMBOD or Blank + FP    
    (5)  Lumen Level: 1/2 (1000, 1500, 2000), 3/5 (3000, 4000, 5000), 6/7 (6000, 7000), 
         109030D2W (1000L, 90CRI, DIM 2 WARM), 159030D2W (1500L, 90 CRI, DIM 2 WARM), 
         209030D2W (2000L, 90CRI, DIM 2 WARM)    
    (6)  CRI: 8, 9, or 97    
    (7)  Color Temp: 4 digit suffix    
    (8)  V - Vandal Resistant w/Torx Screws
         S - Sealed Medical w/Phillips Head Screws    
    (9)  Reflector Light Distribution: 
         M  - Medium, 50°
         SW - Single Wall Wash    
    (10) Flange Type: 
         1 - Self Flanged
         2 - White Painted Flange    
    (11) Reflector Finish    
    (12) Option: Integral Emergency Test Switch Hole or Blank    
    (13) Option: Bottom Lens or Bottom Trim w/lens (Bottom Trim available on 6" only)

Sealed Open Lens[5]
  F6LC(8)(9)(10)(11)(12)
  
[5] (1)  Blank - Sealed Medical, Open (FLD6C or FLD4C);
         X - Sealed Medical W/Bottom Trim/Lens  (FLD6CX or  FLD4CX);
         FLD6X/OR=Sealed Medical Operating Room, w/BottomTrim/Lens 				
    (2)  Delivered Lumens -   FLD6= 250 -12,000;    FLD4= 250-6,000;    
    FLD6X/OR=250-7000				
    (3)  Driver - 3 to 12 digits - D010, DE010, D5LT, 1DL2, DLE, DE010-W2N, D5LT-W2N				
    (4)  Options - May be IEMBOD, EM7, IEM7, EM14, IEM14, IEMBOD, ETRD
    (5)  Lumen Level - 0208IC, 1020, 1015IC, 2540, 4560, 4060, 08259030D2W, 35459030D2W,
         1030W2N902765, 1030W2N902050, 35W2N902765, 35W2N902050				
    (6)  CRI - 90 or 97				
    (7)  Color Temp - 2400K, 2700K, 3000K, 3500K, 4000K,5000K				
    (8)  Trim/Reflectors are spun aluminum.  F6LC & F4LC - Sealed Medical Open, utilizing
         torsion springs;   F6LCXS, F6LCX/OR,& F4LCXS =Sealed Medical Enclosed, utilizing
         phillips head screws 
         Options -  M - Medium 50°beam, W - Wide, SW - Single Wall Wash, N - Narrow - (W,
    SW,
         & N options are only applicable in Sealed/Medical Open) 				
    (9)  Flange Type - 1 - Self Flanged (self flanged finish is same as the reflector
    finish)				
    (10) Flange Type - 2 - White Painted Flange
    (11) Trim/Reflector Finish - LI - specular clear; H - semi-specular clear, WMH - warm
    haze,
         MW - matte white, AMF - antimicrobial matte white, GW - gloss white				
    (12) Option - E - Integral Emergency Test Switch Hole				
    (13) Option - BL84, BL85 ,BL86, BL89AM, BL89BV (BL - Bottom Lens,  polycarbonate or
    acrylic
         lens options 84, 85, 86, 89AM, 89BV) 				
    (14) Option - BTR84, BTR85, BTR86, BTR89BV (BTR -Bottom Trim Ring and polycarbonate or
    acrylic
         lens options 84, 85, 96, 89BV)

Sealed Open Lens[4]
  FEU4B(5)(6)(7)
  
[4] (1)  Blank     - Sealed Medical 
         Open or X - Sealed Medical W/Bottom Trim/Lens or Vandal Resistant    
    (2)  Delivered Lumens: 1000, 1500, 2000, 3000, 4000, 5000, 6000, & 7000    
    (3)  Driver: 3 to 6 digit suffix    
    (4)  Options: May be IEMBOD or Blank + FP    
    (5)  Lumen Level: 1/2 (1000, 1500, 2000), 3/5 (3000, 4000, 5000), 6/7 (6000, 7000), 
         109030D2W (1000L, 90CRI, DIM 2 WARM), 159030D2W (1500L, 90 CRI, DIM 2 WARM), 
         209030D2W (2000L, 90CRI, DIM 2 WARM)    
    (6)  CRI: 8, 9, or 97    
    (7)  Color Temp: 4 digit suffix    
    (8)  V - Vandal Resistant w/Torx Screws
         S - Sealed Medical w/Phillips Head Screws    
    (9)  Reflector Light Distribution: 
         M  - Medium, 50°
         SW - Single Wall Wash    
    (10) Flange Type: 
         1 - Self Flanged
         2 - White Painted Flange    
    (11) Reflector Finish    
    (12) Option: Integral Emergency Test Switch Hole or Blank    
    (13) Option: Bottom Lens or Bottom Trim w/lens (Bottom Trim available on 6" only)

Sealed Open Lens[5]
  FEU4C(5)(6)(7)
  
[5] (1)  Blank - Sealed Medical, Open (FLD6C or FLD4C);
         X - Sealed Medical W/Bottom Trim/Lens  (FLD6CX or  FLD4CX);
         FLD6X/OR=Sealed Medical Operating Room, w/BottomTrim/Lens 				
    (2)  Delivered Lumens -   FLD6= 250 -12,000;    FLD4= 250-6,000;    
    FLD6X/OR=250-7000				
    (3)  Driver - 3 to 12 digits - D010, DE010, D5LT, 1DL2, DLE, DE010-W2N, D5LT-W2N				
    (4)  Options - May be IEMBOD, EM7, IEM7, EM14, IEM14, IEMBOD, ETRD
    (5)  Lumen Level - 0208IC, 1020, 1015IC, 2540, 4560, 4060, 08259030D2W, 35459030D2W,
         1030W2N902765, 1030W2N902050, 35W2N902765, 35W2N902050				
    (6)  CRI - 90 or 97				
    (7)  Color Temp - 2400K, 2700K, 3000K, 3500K, 4000K,5000K				
    (8)  Trim/Reflectors are spun aluminum.  F6LC & F4LC - Sealed Medical Open, utilizing
         torsion springs;   F6LCXS, F6LCX/OR,& F4LCXS =Sealed Medical Enclosed, utilizing
         phillips head screws 
         Options -  M - Medium 50°beam, W - Wide, SW - Single Wall Wash, N - Narrow - (W,
    SW,
         & N options are only applicable in Sealed/Medical Open) 				
    (9)  Flange Type - 1 - Self Flanged (self flanged finish is same as the reflector
    finish)				
    (10) Flange Type - 2 - White Painted Flange
    (11) Trim/Reflector Finish - LI - specular clear; H - semi-specular clear, WMH - warm
    haze,
         MW - matte white, AMF - antimicrobial matte white, GW - gloss white				
    (12) Option - E - Integral Emergency Test Switch Hole				
    (13) Option - BL84, BL85 ,BL86, BL89AM, BL89BV (BL - Bottom Lens,  polycarbonate or
    acrylic
         lens options 84, 85, 86, 89AM, 89BV) 				
    (14) Option - BTR84, BTR85, BTR86, BTR89BV (BTR -Bottom Trim Ring and polycarbonate or
    acrylic
         lens options 84, 85, 96, 89BV)

Sealed Open Lens[4]
  FEU6B(5)(6)(7)
  
[4] (1)  Blank     - Sealed Medical 
         Open or X - Sealed Medical W/Bottom Trim/Lens or Vandal Resistant    
    (2)  Delivered Lumens: 1000, 1500, 2000, 3000, 4000, 5000, 6000, & 7000    
    (3)  Driver: 3 to 6 digit suffix    
    (4)  Options: May be IEMBOD or Blank + FP    
    (5)  Lumen Level: 1/2 (1000, 1500, 2000), 3/5 (3000, 4000, 5000), 6/7 (6000, 7000), 
         109030D2W (1000L, 90CRI, DIM 2 WARM), 159030D2W (1500L, 90 CRI, DIM 2 WARM), 
         209030D2W (2000L, 90CRI, DIM 2 WARM)    
    (6)  CRI: 8, 9, or 97    
    (7)  Color Temp: 4 digit suffix    
    (8)  V - Vandal Resistant w/Torx Screws
         S - Sealed Medical w/Phillips Head Screws    
    (9)  Reflector Light Distribution: 
         M  - Medium, 50°
         SW - Single Wall Wash    
    (10) Flange Type: 
         1 - Self Flanged
         2 - White Painted Flange    
    (11) Reflector Finish    
    (12) Option: Integral Emergency Test Switch Hole or Blank    
    (13) Option: Bottom Lens or Bottom Trim w/lens (Bottom Trim available on 6" only)

Sealed Open Lens[5]
  FEU6C(5)(6)(7)
  
[5] (1)  Blank - Sealed Medical, Open (FLD6C or FLD4C);
         X - Sealed Medical W/Bottom Trim/Lens  (FLD6CX or  FLD4CX);
         FLD6X/OR=Sealed Medical Operating Room, w/BottomTrim/Lens 				
    (2)  Delivered Lumens -   FLD6= 250 -12,000;    FLD4= 250-6,000;    
    FLD6X/OR=250-7000				
    (3)  Driver - 3 to 12 digits - D010, DE010, D5LT, 1DL2, DLE, DE010-W2N, D5LT-W2N				
    (4)  Options - May be IEMBOD, EM7, IEM7, EM14, IEM14, IEMBOD, ETRD
    (5)  Lumen Level - 0208IC, 1020, 1015IC, 2540, 4560, 4060, 08259030D2W, 35459030D2W,
         1030W2N902765, 1030W2N902050, 35W2N902765, 35W2N902050				
    (6)  CRI - 90 or 97				
    (7)  Color Temp - 2400K, 2700K, 3000K, 3500K, 4000K,5000K				
    (8)  Trim/Reflectors are spun aluminum.  F6LC & F4LC - Sealed Medical Open, utilizing
         torsion springs;   F6LCXS, F6LCX/OR,& F4LCXS =Sealed Medical Enclosed, utilizing
         phillips head screws 
         Options -  M - Medium 50°beam, W - Wide, SW - Single Wall Wash, N - Narrow - (W,
    SW,
         & N options are only applicable in Sealed/Medical Open) 				
    (9)  Flange Type - 1 - Self Flanged (self flanged finish is same as the reflector
    finish)				
    (10) Flange Type - 2 - White Painted Flange
    (11) Trim/Reflector Finish - LI - specular clear; H - semi-specular clear, WMH - warm
    haze,
         MW - matte white, AMF - antimicrobial matte white, GW - gloss white				
    (12) Option - E - Integral Emergency Test Switch Hole				
    (13) Option - BL84, BL85 ,BL86, BL89AM, BL89BV (BL - Bottom Lens,  polycarbonate or
    acrylic
         lens options 84, 85, 86, 89AM, 89BV) 				
    (14) Option - BTR84, BTR85, BTR86, BTR89BV (BTR -Bottom Trim Ring and polycarbonate or
    acrylic
         lens options 84, 85, 96, 89BV)

Sealed Open Lens[4]
  FLD4B(1)(2)(3)(4)
  
[4] (1)  Blank     - Sealed Medical 
         Open or X - Sealed Medical W/Bottom Trim/Lens or Vandal Resistant    
    (2)  Delivered Lumens: 1000, 1500, 2000, 3000, 4000, 5000, 6000, & 7000    
    (3)  Driver: 3 to 6 digit suffix    
    (4)  Options: May be IEMBOD or Blank + FP    
    (5)  Lumen Level: 1/2 (1000, 1500, 2000), 3/5 (3000, 4000, 5000), 6/7 (6000, 7000), 
         109030D2W (1000L, 90CRI, DIM 2 WARM), 159030D2W (1500L, 90 CRI, DIM 2 WARM), 
         209030D2W (2000L, 90CRI, DIM 2 WARM)    
    (6)  CRI: 8, 9, or 97    
    (7)  Color Temp: 4 digit suffix    
    (8)  V - Vandal Resistant w/Torx Screws
         S - Sealed Medical w/Phillips Head Screws    
    (9)  Reflector Light Distribution: 
         M  - Medium, 50°
         SW - Single Wall Wash    
    (10) Flange Type: 
         1 - Self Flanged
         2 - White Painted Flange    
    (11) Reflector Finish    
    (12) Option: Integral Emergency Test Switch Hole or Blank    
    (13) Option: Bottom Lens or Bottom Trim w/lens (Bottom Trim available on 6" only)

Sealed Open Lens[5]
  FLD4C(1)(2)(3)(4)
  
[5] (1)  Blank - Sealed Medical, Open (FLD6C or FLD4C);
         X - Sealed Medical W/Bottom Trim/Lens  (FLD6CX or  FLD4CX);
         FLD6X/OR=Sealed Medical Operating Room, w/BottomTrim/Lens 				
    (2)  Delivered Lumens -   FLD6= 250 -12,000;    FLD4= 250-6,000;    
    FLD6X/OR=250-7000				
    (3)  Driver - 3 to 12 digits - D010, DE010, D5LT, 1DL2, DLE, DE010-W2N, D5LT-W2N				
    (4)  Options - May be IEMBOD, EM7, IEM7, EM14, IEM14, IEMBOD, ETRD
    (5)  Lumen Level - 0208IC, 1020, 1015IC, 2540, 4560, 4060, 08259030D2W, 35459030D2W,
         1030W2N902765, 1030W2N902050, 35W2N902765, 35W2N902050				
    (6)  CRI - 90 or 97				
    (7)  Color Temp - 2400K, 2700K, 3000K, 3500K, 4000K,5000K				
    (8)  Trim/Reflectors are spun aluminum.  F6LC & F4LC - Sealed Medical Open, utilizing
         torsion springs;   F6LCXS, F6LCX/OR,& F4LCXS =Sealed Medical Enclosed, utilizing
         phillips head screws 
         Options -  M - Medium 50°beam, W - Wide, SW - Single Wall Wash, N - Narrow - (W,
    SW,
         & N options are only applicable in Sealed/Medical Open) 				
    (9)  Flange Type - 1 - Self Flanged (self flanged finish is same as the reflector
    finish)				
    (10) Flange Type - 2 - White Painted Flange
    (11) Trim/Reflector Finish - LI - specular clear; H - semi-specular clear, WMH - warm
    haze,
         MW - matte white, AMF - antimicrobial matte white, GW - gloss white				
    (12) Option - E - Integral Emergency Test Switch Hole				
    (13) Option - BL84, BL85 ,BL86, BL89AM, BL89BV (BL - Bottom Lens,  polycarbonate or
    acrylic
         lens options 84, 85, 86, 89AM, 89BV) 				
    (14) Option - BTR84, BTR85, BTR86, BTR89BV (BTR -Bottom Trim Ring and polycarbonate or
    acrylic
         lens options 84, 85, 96, 89BV)

Sealed Open Lens[4]
  FLD6B(1)(2)(3)(4)
  
[4] (1)  Blank     - Sealed Medical 
         Open or X - Sealed Medical W/Bottom Trim/Lens or Vandal Resistant    
    (2)  Delivered Lumens: 1000, 1500, 2000, 3000, 4000, 5000, 6000, & 7000    
    (3)  Driver: 3 to 6 digit suffix    
    (4)  Options: May be IEMBOD or Blank + FP    
    (5)  Lumen Level: 1/2 (1000, 1500, 2000), 3/5 (3000, 4000, 5000), 6/7 (6000, 7000), 
         109030D2W (1000L, 90CRI, DIM 2 WARM), 159030D2W (1500L, 90 CRI, DIM 2 WARM), 
         209030D2W (2000L, 90CRI, DIM 2 WARM)    
    (6)  CRI: 8, 9, or 97    
    (7)  Color Temp: 4 digit suffix    
    (8)  V - Vandal Resistant w/Torx Screws
         S - Sealed Medical w/Phillips Head Screws    
    (9)  Reflector Light Distribution: 
         M  - Medium, 50°
         SW - Single Wall Wash    
    (10) Flange Type: 
         1 - Self Flanged
         2 - White Painted Flange    
    (11) Reflector Finish    
    (12) Option: Integral Emergency Test Switch Hole or Blank    
    (13) Option: Bottom Lens or Bottom Trim w/lens (Bottom Trim available on 6" only)

Sealed Open Lens[5]
  FLD6C(1)(2)(3)(4)
  
[5] (1)  Blank - Sealed Medical, Open (FLD6C or FLD4C);
         X - Sealed Medical W/Bottom Trim/Lens  (FLD6CX or  FLD4CX);
         FLD6X/OR=Sealed Medical Operating Room, w/BottomTrim/Lens 				
    (2)  Delivered Lumens -   FLD6= 250 -12,000;    FLD4= 250-6,000;    
    FLD6X/OR=250-7000				
    (3)  Driver - 3 to 12 digits - D010, DE010, D5LT, 1DL2, DLE, DE010-W2N, D5LT-W2N				
    (4)  Options - May be IEMBOD, EM7, IEM7, EM14, IEM14, IEMBOD, ETRD
    (5)  Lumen Level - 0208IC, 1020, 1015IC, 2540, 4560, 4060, 08259030D2W, 35459030D2W,
         1030W2N902765, 1030W2N902050, 35W2N902765, 35W2N902050				
    (6)  CRI - 90 or 97				
    (7)  Color Temp - 2400K, 2700K, 3000K, 3500K, 4000K,5000K				
    (8)  Trim/Reflectors are spun aluminum.  F6LC & F4LC - Sealed Medical Open, utilizing
         torsion springs;   F6LCXS, F6LCX/OR,& F4LCXS =Sealed Medical Enclosed, utilizing
         phillips head screws 
         Options -  M - Medium 50°beam, W - Wide, SW - Single Wall Wash, N - Narrow - (W,
    SW,
         & N options are only applicable in Sealed/Medical Open) 				
    (9)  Flange Type - 1 - Self Flanged (self flanged finish is same as the reflector
    finish)				
    (10) Flange Type - 2 - White Painted Flange
    (11) Trim/Reflector Finish - LI - specular clear; H - semi-specular clear, WMH - warm
    haze,
         MW - matte white, AMF - antimicrobial matte white, GW - gloss white				
    (12) Option - E - Integral Emergency Test Switch Hole				
    (13) Option - BL84, BL85 ,BL86, BL89AM, BL89BV (BL - Bottom Lens,  polycarbonate or
    acrylic
         lens options 84, 85, 86, 89AM, 89BV) 				
    (14) Option - BTR84, BTR85, BTR86, BTR89BV (BTR -Bottom Trim Ring and polycarbonate or
    acrylic
         lens options 84, 85, 96, 89BV)

Sealed Regressed Lens[6]
  FERM4A-(4)-(5)-(6)
  FERM6A-(4)-(5)-(6)
  FLD4A-(1)-(2)-(3)
  FLD6A-(1)-(2)-(3)
  FS4LM1-(7)
  FSR6LM1-(7)-(8)
  
[6] (1) Delivered Lumens: 09, 10, 13, 15, 18, 20, 30				
    (2) Driver: 3 to 6 digit suffix				
    (3) Options: May be IEMBOD or Blank				
    (4) Power Module: 09, 10, 13, 15, 18, 20, 30				
    (5) CRI: 8 or 9				
    (6) Color Temp: 2 or 4 digit suffix				
    (7) Reflector Finish: LI, h, wmh, w				
    (8) Lens: 80, 84, 85, 89am, 93, 94, 89BV or 89BI				
    (9) Accessories: HB26, HB50, RMB, H347, H347200

LED Light Fixture for Splash & Nonfood Food Zones

HDF LED[7]
  HDF-(1)-LD4-(2)-(3)-(4)-(5)-(6)-(7)-(8)-FP
  
[7] (1) Number indicating length of the luminaire: 2, 4 or 8 feet long    
    (2) Number of LED Modules in cross-section: 1 or 2    
    (3) Driver Output Setting: LO - Low, STD - Standard, HI - High    
    (4) Color Temp: 30 - 3000K, 35 - 3500K, 40 - 4000K, 50 - 5000K, R53 or G52    
    (5) Input Voltage: 120, 277, UNV, 347    
    (6) Driver: EDC, EDD, ED1D, 5LTD, LUA/ES or LUA/3W    
    (7) Number of circuits: 1 or 2    
    (8) Internal Diffuser: Blank (no diffuser), iK12 or OPL

Light Fixture with Lens
  (1)FSN-SL1-(2)-(3)-(4)-(5)-(6)-(7)[8]
  FSP-(1)-(2)-(3)-(4)-(5)[9]
  
[8] (1) Numeric suffix indicating length
    (2) Lens Type:
        CA08  - 0.080"  Thick clear acrylic
        CA125 - 0.125" Thick clear polycarbonate
        CP125 - 0.125" Thick clear polycarbonate
        CP187 - 0.187" Thick clear polycarbonate
        CP250 - 0.250" Thick clear polycarbonate
    (3) Optional suffix indicating voltage
    (4) Emergency
        Blank - None
        EL7W  - 7-Watt 120-277V emergency battery pack installed
        EL14W - 14-watt 120-277V emergency battery pack installed
        ETRD  - Emergency Transfer Relay with dimming control
    (5) Alpha numeric suffix indicating CCT
    (6) Alpha numeric suffix indicating wiring options
    (7) Driver type:
        Blank - 10% dimming with Lumen and CCT Select Switches
        HCD   - 1% Dimming
        5LTD  - 10% 0-10V Dali
        5LTHD - 1% 0-10V Dali
        SD    - Step Dimming
        LH    - Lutron HiLume 1% Ecosystem
        L5    - Lutron 5-Series 5% Ecocystem
        WN    - Wavelinx wireless fixture, no sensor
[9] (1) Size:
        22 - 2' x 2'
        24 - 2' x 4'
        14 - 1' x 4'
    (2) Lumen Output:
        High Efficacy     - xxHE where xx represents Lumen Output
        Standard Efficacy - xx where xx represents Lumen Output
    (3) CCT:
        35 - 3500K
        40 - 4000K
        50 - 5000K
    (4) Bottom Lens:
        CA080 - 0.080" Clear Acrylic
        CA125 - 0.125" Clear Acrylic
        CP125 - Clear Polycarbonate 0.125"
        CP187 - Clear Polycarbonate 0.187"
        CP250 - Clear Polycarbonate 0.250" 
    (5) Options Emergency:
        EL7W
        EL14W

Light Fixture for Splash and Non-food Zone

Architectural Med Fixture[10]
  (1)AID-(2)-(3)-(4)-(5)
  
[10] (1) Width and Length in feet				
         14 - 1 x 4
         22 - 2 x 2
         24 - 2 x 4
     (2) Lumen Output
         20 - 2000 Lumens
         25 - 2500 Lumens
         30 - 3000 Lumens
         35 - 3500 Lumens
         40 - 4000 Lumens
         45 - 4500 Lumens
         50 - 5000 Lumens
         55 - 5500 Lumens
         etc.
     (3) Decorative Lens
         CFR1-1" Recessed Cube
         CFR2-21" Recessed Cube
         CNC-2" Curve Regressed
         SWR-Sweep Regressed
         DBR- 2" Double Barrel Regressed
     (4) Protective Shielding
         CA08-0.080" Thick Clear Acrylic
         CA125-0.125" Thick Clear Acrylic
         CP125-0.125" Thick Clear Polycarbonate
         CP187-0.187" Thick Clear Polycarbonate
         CP250-0.250" Thick Clear Polycarbonate
     (5) Color Temperature
         L830-80CRI, 3000K
         L835-80CRI, 3500K
         L840-80CRI, 4000K
         L850-80CRI, 5000K

FLR Panel Light Fixtures for Splash and Non-food Zone[20]
  (1)FLR-(2)-(3)-(4)-(5)-(6)-(7)-(8)
  
[20] (1) Width and Length in ft.
         14 - 1x4
         22 - 2x2
         24 - 2x4		
     (2) Location Designation
         HA - High Abuse (Polycarbonate Lens)
         WL - Wet Location
         SM - Sealed/Medical	
     (3) Lumen Output
         20/20HE - 2000
         25/25HE - 2500
         30/30HE - 3000
         35/35HE - 3500
         40/40HE - 4000
         42/42HE - 4200
         45/45HE - 4500
         55/55HE - 5500
         65/65HE - 6500
         72/72HE - 7200
         80HE    - 8000
         90HE    - 9000
         10HE    - 10000	
     2x2		
     L3C3 - 2700-5000 Lumens, 3500k-5000k		
     2x4			
     L3C3 - 3600-6900 Lumens, 3500k-5000k		
     (4) Color Temperature
         35 - 3500 K	
         40 - 4000 K	
         50 - 5000 K		
     C3 (2x2, 2x4: 3500k, 4000k, 5000k)
         L830 - 3000K, 80 CRI	
         L835 - 3500K, 80 CRI	
         L840 - 4000K, 80 CRI			
         L850 - 5000K, 80 CRI	
         L930 - 3000K, 90 CRI	
         L935 - 3500K, 90 CRI			
         L940 - 4000K, 90 CRI		
     (5) Interior Lens					
         Blank - Frosted Acrylic, 0.040" thick					
     (6) Bottom Lens					
         CA080 - Clear Acrylic, 0.080"			
         CA125 - Clear Acrylic, 0.125"		
         CP125 - Clear Polycarbonate, 0.125"			
         CP187 - Clear Polycarbonate, 0.187"		
         CP25  - Clear Polycarbonate, 0.25"			
         CP375 - Clear Polycarbonate, 0.375"		
     (7) Options					
         EL7W    - 7W EM Pack, Installed			
         EL14W   - 14W EM Pack, Installed		
         EL10W   - 10W EM Pack, Installed			
         EL10WSD - 10W EM Pack, Installed with self-diagnostics		
         GTRD    - Bodine EM Transfer Relay			
         ETRD    - Iota EM Transfer Relay		
     IP65	
     A3/8-5-18GDIM				
     (8) Coating					
         Blank - Solatron's EST150BS and LICHANG's SP-MEW-4082

FP Panel[11]
  (1) FPSL (3)
  (1)FP(2)(3)(4)
  
[11] (1) Width and Length in feet
         14 - 1x4
         22 - 2x2
         24 - 2x4
     (2) Maximum Wattage
         47 W
         64 W
         38 W
         58 W
         31 W
     (3) Color Temperature
         30    - 3000 K
         35    - 3500 K
         40    - 4000 K
         50    - 5000 K
         #SCT3 - Selectable
     (4) Efficacy
         C  - 100-129 lm/W
         C9 - 90-99 lm/W
         HE - 130-135 lm/W

Fail-Safe Clean Room Luminaire[24]
  CLPF-(1)-(2)-(3)-(4)-(5)-(6)-(7)(8)-(9)-(10)-(11)(12)-(13)
  CLPFE-(1)-(2)-(3)-(4)-(5)-(6)-(7)(8)-(9)-(10)-(11)(12)-(13)
  CLPG-(1)-(2)-(3)-(4)-(5)-(6)-(7)(8)-(9)-(10)-(11)(12)-(13)
  CLPS-(1)-(2)-(3)-(4)-(5)-(6)-(7)(8)-(9)-(10)-(11)(12)-(13)
  
[24] (1) Indicates width 24 - 24 inches or 12 - 12 inches
     (2) indicates length 1 - 1foot, 2 - 2 feet or 4 - 4 feet
     (3) Indicates housing material
         Blank - Cold Rolled Steel Powder Coat Painted White	
         ALH - Aluminum Housing, Painted Powder Coat White
         SHP - Stainless Steel (304), Powder Coat Painted White
         SH316P - Stainless Steel (316), Powder Coat Painted White
         SHB - Stainless Steel (304) Brushed
         SH316B - Stainless Steel -316 Brushed
     (4) Door Type
         INS - Inset Door, Die-formed Steel, Painted White
         INA - Inset Door, Die-formed Aluminum, Painted White
         INSSP - Inset Door,Die-formed Stainless Steel, Painted White (Replace Steel, Painted
     White (Replace P with B for Brushed)
         INSS316P - inset Door, Die-formed (316) Stainless Steel Painted White (Replace P
     with B for Brushed)
         OLS - Overlapping Door, Dieformed Steel, Painted White
         OLA - Overlapping Door, Dieformed Aluminum, Painted White
         OLSSP - Overlapping Door, Dieformed Stainless Steel, Painted White (Replace P with B
     for Brushed)	
         OLSS316P - Overlapping Door, Die-formed (316) Stainless Steel, Painted White
     (Replace P with B for Brushed)	
     (5) Lens
         A12125 - Pattern 12 Acrylic, 0.125" Thick, Inverted
         A19156 - Pattern 19, 0.156" Thick, Inverted
         P12125 - Pattern 12 Polycarbonate, 0.125" Thick, Inverted
         89BW=Acrylic, Opal Smooth, 0.125" Thick
         89AM=Polycarbonate, Opal Smooth, 0.125" Thick
     (6) LED's - LD4
     (7) Number of LED's 1, 2, 3, 4, 5
     (8) Illumination Level
         LO - Low
         STD - Standard
         HI - High
     (9) Indicates Color Temperature
         20 - 2000K (White LEDs only)
         27 - 2700K (White LEDs only)
         30 - 3000K (White LEDs only)
         35 - 3500K (White LEDs only)
         40 - 4000K (White LEDs only)
         50 - 5000K (White LEDs only)
         R63 - Red, 630nm (Red LEDs only)
         A59 - Amber, 590nm
         G52 - Green, 520nm
     (10) indicate Voltage
         120 - 120V
         277 - 277V
         UNV - 120V-277V
     (11) Indicates Driver
         EDC - Electric Driver Non-Dimming
         EDD  - Electronic Driver, 0-10V Dimming 10%
         ED1D  - Electronic 0-10V Driver, Dimming 1%
     (12) Indicates number of circuits
         2 - 2 Circuits
         3 - 3 Circuits
         4 - 4 Circuits
         5 - 5 Circuits
     (13) Indicates options
         EL7W - 7W EM Pack
         EL10W - 10W EM Pack
         EL14W - 14W EM Pack 
         AMA - Antimicrobial, All Parts
         AMD - Antimicrobial, Door Only
         DF - 0.02" thick opal acrylic film, high light transmission diffusing film
         MSB4 - Mounting Safety Brackets (4) with Hardware
         90 - 90 CRI

Fail-Safe Clean Room Luminaire[23]
  CLMF-(1)-(2)-(3)-(4)-(5)-(6)-(7)(8)-(9)-(10)-(11)(12)-(13)
  CLMG-(1)-(2)-(3)-(4)-(5)-(6)-(7)(8)-(9)-(10)-(11)(12)-(13)
  CLMS-(1)-(2)-(3)-(4)-(5)-(6)-(7)(8)-(9)-(10)-(11)(12)-(13)
  QS-CLMG-(1)-(2)-(3)-(4)-(5)-(6)-(7)(8)-(9)-(10)-(11)(12)-(13)
  
[23] (1) Indicates width 24 - 24 inches or 12 - 12 inche23
     (2) indicates length 2 - 2 feet or 4 - 4 feet
     (3) Indicates housing material
         Blank - Cold Rolled Steel Powder Coat Painted White
         ALH - Aluminum Housing, Painted Powder Coat White
         SHP - Stainless Steel (304), Powder Coat Painted White
         SH316P - Stainless Steel (316), Powder Coat Painted White
         SHB - Stainless Steel (304) Brushed
         SH316 - Stainless Steel -316 Brushed
     (4) Door Type
         INS - Inset Door, Die-formed Steel, Painted White
         INA - Inset Door, Die-formed Aluminum, Painted White
         INSSP - Inset Door,Die-formed Stainless Steel, Painted White (Replace Steel, Painted
     White (Replace P with B for Brushed)
         INSS316P - inset Door, Die-formed (316) Stainless Steel Painted White (Replace P
     with B for Brushed)
         OLS - Overlapping Door, Dieformed Steel, Painted White
         OLA - Overlapping Door, Dieformed Aluminum, Painted White
         OLSSP - Overlapping Door, Dieformed Stainless Steel, Painted White (Replace P with B
     for Brushed)
         OLSS316P - Overlapping Door, Die-formed (316) Stainless Steel, Painted White
     (Replace P with B for Brushed)
     (5) Lens
         A12125 - Pattern 12 Acrylic, 0.125" Thick, Inverted
         A19156 - Pattern 19, 0.156" Thick, Inverted
         P12125 - Pattern 12 Polycarbonate, 0.125" Thick, Inverted
     (6) LED's - LD4
     (7) Number of LED's 1, 2, 3, 4, 5
     (8) Illumination Level
         LO - Low
         STD - Standard
         HI - High
     (9) Indicates Color Temperature
         20 - 2000K (White LEDs only)
         27 - 2700K (White LEDs only)
         30 - 3000K (White LEDs only)
         35 - 3500K (White LEDs only)
         40 - 4000K (White LEDs only)
         50 - 5000K (White LEDs only)
         R63 - Red, 630nm (Red LEDs only)
         A59 - Amber, 590nm
         G52 - Green, 520nm
     (10) indicate Voltage
         120 - 120V
         277 - 277V
         UNV - 120V-277V
     (11) Indicates Driver
         EDC - Electric Driver Non-Dimming
         EDD  - Electronic Driver, 0-10V Dimming 10%
         ED1D  - Electronic 0-10V Driver, Dimming 1%
     (12) Indicates number of circuits
         2 - 2 Circuits
         3 - 3 Circuits
         4 - 4 Circuits
         5 - 5 Circuits
     (13) Indicates options
         MSB4-PK - Mounting Safety Brackets with Hardware
         EL7W - 7W EM Pack
         EL10W - 10W EM Pack
         EL14W - 14W EM Pack
         AMA - Antimicrobial, All Parts
         AMD - Antimicrobial, Door Only
         GSK - Gasketing applied to housing flange to rest on grid (CLMG), applied to housing
     flange to seal against ceiling
         (CLMF) 90 - 90 CRI

Fail-Safe Patient Room Luminaire[22]
  QS-(1)-APR-(2)-(3)-(4)-(5)-(6)-(7)-(8)-(9)-(10)-(11)
  
[22] (1) Indicates width 24 - 24 inches or 12 - 12 inches
     (2) Indicates Ambient Lumens
         2x2
         22 - 2200
         30 - 3000
         34 - 3400
         38 - 3800
         2x4
         49 - 4900
         58 - 5800
         67 - 6700
         85 - 8500
     (3) Indicates Ambient CCT
         L835 - 80CRI, 3500K
         L840 - 80CRI, 4000K
         L850 - 80CRI, 5000K
         L930 - 90CRI, 3000K
         L935 - 90CRI, 3500K
         L940 - 90CRI, 4000K
         L950 - 90CRI, 5000K
         L82765 - White tuning 80 CRI, 2700K-6500K
         L83050 - White tuning 80 CRI, 3000K-5000K
         L92765 - White tuning 90 CRI, 2700K-6500K
         L93050 - White tuning 90 CRI, 3000K-5000K
         B35 - BioUp Static 3500K
         B40 - BioUp Static 4000K
         B50 - BioUp Static 5000K
         B2750 - BioUp Tunable 2700K-5000K
     (4) Indicates Exam Lumens
         2x2
         62 - 6200
         71 - 7100
         80 - 8000
         89 - 8900
         2x4
         140 - 14000
         160 - 16000
         180 - 18000	
         200 - 20000
     (5) Indicates Exam CCT	
         L835 - 80CRI, 3500K
         L840 - 80CRI, 4000K
         L850 - 80CRI, 5000K
         L930 - 90CRI, 3000K
         L935 - 90CRI, 3500K
         L940 - 90CRI, 4000K
         L950 - 90CRI, 5000K
         L82765 - White tuning 80 CRI, 2700K-6500K
         L83050 - White tuning 80 CRI, 3000K-5000K
         L92765 - White tuning 90 CRI, 2700K-6500K
         L93050 - White tuning 90 CRI, 3000K-5000K
     (6) Indicates Voltage
         120 - 120V
         277 - 277V
         UNV - 120V-277V
     (7) Ambient Driver Type
         CD - 10% Dimming	
         HCD - 1% Dimming
         5LTD - DALI 5%
         LH - Lutron 1% EcoSystem
         W2A - White Tuning, 2ch Analog 0-10V intensity and CCT control, 1% dimming
         W2D - White Tuning, DALI Type 8, 1% dimming
     (8) Indicates Exam Driver Type
         CD - 10% Dimming
         HCD - 1% Dimming	
         5LTD - DALI 5%
         LH - Lutron 1% EcoSystem
     (9) Reading Light Option
         RL827 - 2700K
         RL830 - 3000K
         RL835 - 3500K
         RL840 - 4000K
         RL850 - 5000K
     (10) Indicates Night Light Option
         NLA - Night Light, Amber
         NL827 - Night Light, 2700K
         NL830 - Night Light, 3000K
         NL835 - Night Light, 3500K
         NL840 - Night Light, 4000K
         NL850 - Night Light, 5000K
     (11) Options
         LVCP/x/y=Low Voltage Relay, Non-Dimming. Controls up to 2 circuits. (14), (16)
         LVCP ordering function callout (x/y): A=Ambient, E=Exam, R=Reading, N=Nightlight.
     Unused circuit leave blank.
         i.e. LVCP/A/E=(Relay controlling Ambient & Exam), i.e. LVCP/A=(Relay controlling
     Ambient only)
         LVC3/x/y/z=Low Voltage Relay. Controls up to 3 circuits, and up to 2 circuits
     dimmable.
         LVC3 ordering function callout (x/y/z): A=Ambient, E=Exam, R=Reading, N=Nightlight.
     Provide a “D” with the				
     function callout requiring dimming; up to 2 circuits can be dimmable. Unused circuit
     leave blank.
         i.e. LVC3/AD/ED/R=(Relay controlling Ambient(Dimming)/ Exam(Dimming) &
     Reading(no-dimming)
         i.e. LVC3/AD/E/RD=(Relay controlling Ambient(Dimming)/ Exam(no dimming) &
     Reading(Dimming)
         EL7W=7W emergency battery pack
         EL10W=10W emergency battery pack
         EL14W=14W emergency battery pack
         ETRD=Emergency Transfer Relay connected to Exam Circuit
         GTR2=Generator Transfer Relay connected to Exam Circuit 
         CP125= .125" Clear Poly Lens. CP125 requires screws to fasten door to housing.
         CP250= .250” Clear Poly Lens. CP250 requires screws to fasten door to housing.
         TRS=Tamper-Resistant Screws, T20 TORX®, optional when ordering either the CP125 or
     CP250 lens options
         GSK=Gasket applied to outside edge of flange for grid contact

Fail-Safe Tri-Seal Clean Room Flourescent Luminaire[12]
  CRF-12-(1)(2)(3)(4)(5)(6)
  CRF-24-(1)(2)(3)(4)(5)(6)
  CRG-12-(1)(2)(3)(4)(5)(6)
  CRG-24-(1)(2)(3)(4)(5)(6)
  CRL-12-(1)(2)(3)(4)(5)(6)
  CRL-24-(1)(2)(3)(4)(5)(6)
  CRS-12-(1)(2)(3)(4)(5)(6)
  CRS-24-(1)(2)(3)(4)(5)(6)
  
[12] (1) Lamp Type						
         124T5    - (1) 24W T5 Flourescent
         224T5    - (2) 24W T5 Flourescents
         324T5    - (3) 24W T5 Flourescents
         424T5    - (4) 24W T5 Flourescents
         624T5    - (6) 24W T5 Flourescents
         117      - (1) 17W T8 Flourescent
         217      - (2) 17W T8 Flourescents
         317      - (3) 17W T8 Flourescents
         417      - (4) 17W T8 Flourescents
         617      - (6) 17W T8 Flourescents
         1U 1 5/8 - (1) 31W T8 Flourescent
         240BX    - (2) 40W Biaxial Flourescents
         154T5    - (1) 54W T5 Flourescent
         254T5    - (2) 54W T5 Flourescents
         354T5    - (3) 54W T5 Flourescents
         454T5    - (4) 54W T5 Flourescents
         654T5    - (6) 54W T5 Flourescents
         132      - (1) 32W Flourescents
         232      - (2) 32W Flourescents
         332      - (3) 32W Flourescents
         432      - (4) 32W Flourescents
         632      - (6) 32W Flourescents
     (2) Voltage
         120 - 120V
         277 - 277V
         UNC - 347-480V
         UNV - 120V-277V
     (3) Lens Type
         IK12  - K-12 Prismatic Acrylic
         ID12  - K-12 Prismatic Impact Resistant Acrylic
         IP12  - K-12 Prismatic Polycarbonate
         KSH25 - Bat Wing Distribution				
         93    - Prismatic Temered Glass
     (4) Ballast
         B51  - (1) Ballast for use with T5 lamps
         EB52 - (2) Ballast for use with T5 lamps
         EB81 - (1) Ballast for use with T8 lamps
         EB82 - (2) Ballast for use with T8 lamps
         EBX1 - (1) Ballast for use with Biax lamps
         EBX2 - (2) Ballast for use with Biax lamps
     (5) Door/Finish Option
         Blank - Standard, CRS with baked white finish
         SSN   - Stainless Steel door/Brushed finish
         SSP   - Stainless Steel door/Polyster Powder Coat finish
         ALP   - Aluminum door/Polyester Powder Coat finish
     (6) Options/Housing Finish
         EBP - Emergency Battery Pack
         GLR - Fuse and Holder
         RIF - Radio Frequency Interface Filter
         TAD - Top Access Door
         AM  - Antimicrobial Finish
         SHN - Stainless Steel, Brushed Finish
         SHP - Stainless Steel, Polyester Powder finish
         ALH - Alumin, Polyester Powder finish
         GSK - Gasket Applied to housing Flange against Ceiling

Harmony VR Linear Series Surface Mounted Fluorescent Luminaire[13] [14] [15] [16]
  8THVL12–(1)(2)-(3)(4)-(5)-(6)-(7)
  8THVL8–(1)(2)-(3)(4)-(5)-(6)-(7)-(8)
  HVL12–(1)(2)-(3)(4)-(5)-(6)-(7)
  HVL8–(1)(2)-(3)(4)-(5)-(6)-(7)-(8)
  
[13] NSF Certified production beginning with date code 12/21/06.
[14] Intended for splash/nonfood zone applications.
[15] (2) Voltage
         120 - 120V
         277 - 277V
         347 - 347V
         UNV - 120-277V
         UNC - 347-480V
     (3) Lens Type
         C - Clear lined ribbed
         O - Opal smooth
     (5) End Caps
         D - Decorative end caps, sculpted
         S - Smooth end caps, flat
     (6) Options
         EBP   - Emergency battery pack 
         FNL   - Fluorescent night light
         PM    - Pendant mount
         GLR   - Fuse and holder
         UPL   - Uplight
         TILW  - Tandem in-line wiring
         PI1   - Single circuit plug-In harness/connector
         PI2   - Dual circuit plug-In harness/connector
         IB/OB - Inboard/Outboard wiring
         FS    - Food service
     (7) Finish
         Blank - Architectural white
         BK    - Architectural black
         DP    - Dark platinum
[16] (1) Lamp type
         2' Length
         114 - (1) 14W T5 Lamp
         117 - (1) 17W T8 Lamp
         124 - (1) 24W T5HO Lamp
         214 - (2) 14W T5 Lamps
         217 - (2) 17W T8 Lamps
         224 - (2) 24W T8 Lamps
         314 - (3) 14W T5 Lamps
         317 - (3) 17W T8 Lamps
         417 - (4) 17W T8 Lamps
         4' Length
         128 - (1) 28W T5 Lamp
         132 - (1) 32W T8 Lamp
         154 - (1) 54W T5 Lamp
         228 - (2) 28W T5 Lamps
         232 - (2) 32W T8 Lamps
         328 - (3) 28W T5 Lamps
         332 - (3) 32W T8 Lamps
         432 - (4) 32W T8 Lamps
         8' Length
         128 - (1) 28W T5 Lamp
         132 - (1) 32W T8 Lamp
         154 - (1) 54W T5 Lamp
         228 - (2) 28W T5 Lamps
         232 - (2) 32W T8 Lamps
         328 - (3) 28W T5 Lamps
         332 - (3) 32W T8 Lamps
         432 - (4) 32W T8 Lamps
     (4) Ballast
         EB81 - (1) Ballast for use with T8 Lamp
         EB82 - (2) Ballasts for use with T8 Lamps
         EB83 - (3) Ballasts for use with T8 Lamps
         EB84 - (4) Ballasts for use with T8 Lamps
         EB51 - (1) Ballast for use with T5 Lamp
         EB52 - (2) Ballasts for use with T5 Lamps
         EB53 - (3) Ballasts for use with T5 Lamps
         EB54 - (4) Ballasts for use with T5 Lamps

Harmony VR Linear Series Surface Mounted LED Luminaire[13] [14] [17]
  HVL12–(1)-(2)-LD(3)-(4)(5)-(6)-(7)-(8)-(9)(10)-(11)-(12)-(13)
  HVL8–(1)-(2)-LD(3)-(4)(5)-(6)-(7)-(8)-(9)(10)-(11)-(12)-(13)
  
[13] NSF Certified production beginning with date code 12/21/06.
[14] Intended for splash/nonfood zone applications.
[17] (1) Row/Node Configuration    
         Blank - Individual    
         BR    - Beginning of Run    
         MR    - Middle of Run    
         ER    - End of Run    
     (2) Length     
         1 - 1'    
         2 - 2'    
         4 - 4'    
         8 - 8'    
     (3) Number indicating LED version    
     (4) Number of LED's    
         1 - (1) LED Module in Cross-Section    
         2 - (2) LED Module in Cross-Section    
         3 - (3) LED Module in Cross-Section (HVL12 Only)    
     (5) Illumination Level    
         STD - Standard    
         LO  - Low    
         HI  - High    
     (6) Color Temperature    
         30 - 3000 Kelvin    
         35 - 3500 Kelvin    
         40 - 4000 Kelvin    
         50 - 5000 Kelvin
     (7) Voltage    
         120 - 120V    
         277 - 277V    
         347 - 347V    
         UNV - 120-277V    
         UNC - 347-480V
     (8) Lens Type    
         O - Opal Smooth (no ribs), Polycarbonate    
         C - Clear Lens, ribbed, Polycarbonate    
     (9) Driver    
         EDC_  - Electronic Driver, Non-Dimming    
         EDD_  - Electronic Driver, 0-10v Dimming 10%    
         ED1D_ - Electronic Driver, 0-10v Dimming 1%    
     (10) No. of Circuits    
          1 - 1 Circuit    
          2 - 2 Circuit 
          3 - 3 Circuit    
          4 - 4 Circuit    
     (11) End Caps
          D - Decorative, End Caps, Sculpted
          S - Smooth End Caps, Flat
     (12) Options
          PM            - Pendant Mount
          NSF           - Certified NSF Rating for Food Industry
          TILW          - Tandem In-Line Wiring (8' fixture only)
          PI1BLK-6PP-WG - Single circuit harness, hot conductor black and white neutral
                          connected to driver(s), with ground
          PI2BLK-6PP-WG - Dual circuit harness, hot black conductor and white neutral
                          connected to driver(s), with ground
          PI2BLU-6PP-WG - Dual circuit harness, hot blue conductor and white neutral
                          connected to driver(s), with ground
          IB/OB         - Inboard/outboard wiring (only necessary for 8T)
          OS1           - Integrated Motion/Occupancy Sensor (within lens)
                           connected to 1 LED module. Voltage specific
          OS2           - Integrated Motion/Occupancy Sensor (within lens)
                          connected to 2 LED modules. Voltage specific
          EL7W          - 7W Emergency Battery Pack
          EL10W         - 10W Emergency Battery Pack
          EL14W         - 14W Emergency Battery Pack
          IP64          - IP64 compliant
          NAT           - Natatorium Finish, Aluminum Components, Stainless steel Hardware
     (13) Finish
          Blank - Architectural White
          BK    - Architectural Black
          DP    - Dark Platinum

MRI Recessed Luminaire
  MRI-(1)-ASR-(2)(3)(4)(5)[18]
  MRI-(1)-ATR-(2)(3)(4)[19]
  
[18] (1) Aperture in inches:
         2 - 2
         4 - 4
     (2) Length in feet:
         2 - 2
         4 - 4
         8 - 8
     (3)  Lumen Output:
         250  - 250 Lumens/foot
         500  - 500 Lumens/foot
         1000 - 1000 Lumens/foot
     (4) CRI/CCT:
         L835   - 80CRI, 3500K
         L840   - 80CRI 4000K
         L850   - 80CRI, 5000K
         L935   - 90CRI, 3500K
         L940   - 90CRI, 4000K
         L950   - 90CRI, 5000K
         L83050 - 80CRI, 3000-5000K
         L82765 - 80CRI, 2700-6500K
         L93050 - 90CRI, 3000-5000K
         L92765 - 90CRI, 2700-6500K
     (5) Lens type:
         OPL - Opal
         HEO - Lumio
[19] (1) Width and Length in feet:
         14 - 1 x 4
         22 - 2 x 2
         24 - 2 x 4
     (2) Lumen Output:
         20 - 2000 Lumens
         40 - 4000 Lumens
         80 - 8000 Lumens
     (3) CRI/CCT:
         L835   - 80CRI, 3500K
         L840   - 80CRI 4000K
         L850   - 80CRI, 5000K
         L935   - 90CRI, 3500K
         L940   - 90CRI, 4000K
         L950   - 90CRI, 5000K
         L83050 - 80CRI, 3000-5000K
         L82765 - 80CRI, 2700-6500K
         L93050 - 90CRI, 3000-5000K
         L92765 - 90CRI, 2700-6500K
     (4) Lens type:
         OPL - Opal


Facility : Zhangzhou, Fujian, China


CGT Panel Light Fixtures for Splash and Non-food Zone[1]
  (1) CGT (2) (3) C (6)
  (1) CGTS-(4)-(5)
  
[1] (1) Width and Length in ft.
        14 - 1x4
        22 - 2x2
        24 - 2x4
    (2) Maximum Wattage
        40 W
        35 W
        45 W
        55 W
    (3) Color Temperature
        35 - 3500 K
        40 - 4000 K
        50 - 5000 K
    C3 (2x2, 2x4: 3500k, 4000k, 5000k)
        L830 - 3000K, 80 CRI
        L835 - 3500K, 80 CRI
        L840 - 4000K, 80 CRI
        L850 - 5000K, 80 CRI
        L930 - 3000K, 90 CRI
        L935 - 3500K, 90 CRI
        L940 - 4000K, 90 CRI
    (4) Lumen Output
        20/20HE - 2000
        25/25HE - 2500
        30/30HE - 3000
        35/35HE - 3500
        40/40HE - 4000
        42/42HE - 4200
        45/45HE - 4500
        55/55HE - 5500
        65/65HE - 6500
        72/72HE - 7200
        80HE    - 8000
        90HE    - 9000
        10HE    - 10000
    1x4 L3C3 = 3000-5000 Lumens, 3500k-5000k				
    2x2				
    L3C3 - 2700-5000 Lumens, 3500k-5000k				
    2x4				
    L3C3 - 3600-6900 Lumens, 3500k-5000k
    (5) Options
        EL7W    - 7W EM Pack, Installed
        EL8W = 8W EM Pack, Installed
        EL14W   - 14W EM Pack, Installed
        EL10W   - 10W EM Pack, Installed
        EL10WSD - 10W EM Pack, Installed with self-diagnostics
        GTRD    - Bodine EM Transfer Relay
        ETRD    - Iota EM Transfer Relay
    IP65
    A3/8-5-18GDIM
    (6) Coating
        Blank - Solatron's EST150BS and LICHANG's SP-MEW-4082
    (7) Integrated Sensing System
        WLS = Wavelinx Lite Wireless Integrated Sensor


Facility : Cienega de Flores Nl, Mexico


FLR2 Panel Light Fixtures for Splash and Non-food Zone[12]
  (1)FLR2-(2)-(3)-(4)-(5)-(6)-(7)-(8)
  
[12] (1) Width and Length in ft.
         14 = 1x4
         22 = 2x2
         24 = 2x4
     (2) Location Designation
         HA = High Abuse (Polycarbonate Lens)
         WL = Wet Location
         MC = Medical/Cleanroom
     (3) Lumen Output
         20/20HE = 2000
         25/25HE = 2500
         30/30HE = 3000
         35/35HE = 3500
         40/40HE = 4000	
         42/42HE = 4200	
         45/45HE = 4500
         55/55HE = 5500	
         65/65HE = 6500
         72/72HE = 7200		
         80HE = 8000
         90HE = 9000	
         100HE = 10000
         70HE = 7000			
         50HE - 5000
         45HE = 4500				
         60HE= 6000
         55HE = 5500			
     (4) Color Temperature
         L830 = 3000K, 80 CRI
         L835 = 3500K, 80 CRI
         L840 = 4000K, 80 CRI
         L850 = 5000K, 80 CRI
         L930 = 3000K, 90 CRI
         L935 = 3500K, 90 CRI
         L940 = 4000K, 90 CRI		
     (5) Interior Lens
         Blank = Frosted Acrylic, 0.040" thick					
     (6) Bottom Lens
         CA080 = Clear Acrylic, 0.080"
         CA125 = Clear Acrylic, 0.125"
         CP125 = Clear Polycarbonate, 0.125"
         CP187 = Clear Polycarbonate, 0.187"
         CP25 = Clear Polycarbonate, 0.25"
         CP375 = Clear Polycarbonate, 0.375"
         CP080 = Clear Acrylic, 0.080"
     (7) Options
         EL7W = 7W EM Pack, Installed
         EL14W = 14W EM Pack, Installed
         EL10W = 10W EM Pack, Installed
         EL10WSD = 10W EM Pack, Installed with self-diagnostics
         GTRD = Bodine EM Transfer Relay
         ETRD = Iota EM Transfer Relay
         IP65
         A3/8-4-18GDIM - Dimming Flex
         A3/8-5-18GDIM - Dimming Flex
         A3/8-3-18GDIM - Non Dimming
         A3/8-2-18GDIM - Non Dimming
         MW12FF12/3G-120V
         MW27FF12/3G-277V
         IP66
         MW12FF12/2G-010V-120V
         GSK=Gasket around perimeter
         MW27FF12/2G-010V-277V					
     (8) Coating
         Blank = Solatron's EST150BS and LICHANG's SP-MEW-4082

CGT Panel Light Fixtures for Splash and Non-food Zone[1]
  (1)CGTX-(2)-(3)-(4)-(5)
  
[1] (1) Width and Length in ft.
        14 - 1x4
        22 - 2x2
        24 - 2x4
    (2) Lumen Output
        20/20HE - 2000
        25/25HE - 2500
        30/30HE - 3000
        35/35HE - 3500
        40/40HE - 4000
        42/42HE - 4200
        45/45HE - 4500
        55/55HE - 5500
        65/65HE - 6500
        72/72HE - 7200
        80HE    - 8000
        90HE    - 9000
        10HE    - 10000
    (3) Interior Lens
        Blank - Frosted Acrylic, 0.040" thick
    (4) Options
        EL7W    - 7W EM Pack, Installed
        EL14W   - 14W EM Pack, Installed
        EL10W   - 10W EM Pack, Installed
        EL10WSD - 10W EM Pack, Installed with self-diagnostics
        GTRD    - Bodine EM Transfer Relay
        ETRD    - Iota EM Transfer Relay
        IP65 A3/8-5-18GDIM
    (5) Integrated Sensing System
        WAA - Lavelinx Pro Wireless Integrated Sensor
        WAB - Wavelinx Lite Wireless Integrated Sensor

FCZ Light Fixture for Splash and Non-food Zone[2]
  (1)(2)FCZ2-(3)-(4)-(5)-(6)-(7)-(8)-(9)-(10)-(11)-(12)
  
[2] (1) Width in Inches    
    (2) Length in Feet    
    (3) Lumen Output:  
        High Efficacy - xxHE where xx represents Lumen Output 
        Standard Efficacy - xx where xx represents Lumen Output     
    (4) Input Voltage:  UNV or 347V    
    (5) CRI/CCT
        L830 - 80CRI, 3000K
        L835 - 80CRI, 3500K 
        L840 - 80CRI, 4000K
        L850 - 80CRI, 5000K
        L83050 - 80CRI 3000K-5000K White Tuning
        L82765 - 80CRI 2700K-6500K White Tuning     
    (6) Diffuser:  Blank (No Diffuser), RDP, S, CLSC, BRDR or CURV    
    (7) Bottom Lens: 
        CA08 - 0.080" Clear Acrylic
        CA125 - 0.125" Clear Acrylic
        CP125 - Clear Polycarbonate 0.125"
        CP187 - Clear Polycarbonate 0.187"
        CP250 - Clear Polycarbonate 0.250"    
    (8) Driver Type: CD, HCD, 5LTD, 5HTLD, SD, LH, W2A
    (9) Number of Drivers: 1 or 2    
    (10) Options Emergency:   EL7W, EL14W, GTR2 or ETRD; AND AM - Antimicrobial Finish    
    (11) Integrated Sensing Sytems:   Blank (No Sensor), SWPD1, SDWPD1, LWIPD1, LDWIPD1,
    LWTPD1, SLVPD1, SDLVPD1, SVPD1 or SDVPD1
    (12) Packaging: U - Units

FP Panel Light Fixtures for Splash and Non-food Zone[3]
  (1)FPX-(2)-(3)-(4)-(5)
  
[3] (1) Width and Length in ft.
        14 - 1x4
        22 - 2x2
        24 - 2x4
    (2) Lumen Output
        26 - 2600
        30 - 3000
        42 - 4200
    (3) Voltage
        Blank - 120-277
        347V  - 347 Volts
        48V   - 48 Volt
    (4) Color Temperature
        30    - 3000 K
        35    - 3500 K
        40    - 4000 K
        50    - 5000 K
        #SCT3 - Selectable
    (5) Integrated Sensors
        WAA   - Wavelinx Wireless
        WAB   - Wavelinx Lite
        WLA   - Low-Voltage
        SVPD1 - 0-10V Stand-alone

Industrial/Vaportite Lighting Fixture for Splash and Non-food Zones
  8TVT2-(1)(2)-(3)(4)-(5)-(6)-(7)-(8)-(9)[4] [5] [6]
  8TVT3-(1)(2)-(3)(4)-(5)-(6)-(8)-(7)-(9)-(10)[4] [5] [7]
  VT1-(1)(2)-(3)(4)-(5)-(6)-(7)-(8)-(9)[4] [8] [9]
  VT2-(1)(2)-(3)(4)-(5)-(6)-(7)-(8)-(9)[4] [5] [6]
  VT3-(1)(2)-(3)(4)-(5)-(6)-(7)-(8)-(9)-(10)[4] [5] [7]
  VT4-(1)(2)-(3)(11)-(4)-(5)-(6)-(7)-(9)-(1)[4] [8] [10]
  
[4] (1) Number of Lamps
        1 - 1 Lamp 
        2 - 2 Lamps 
        3 - 3 Lamps 
        4 - 4 Lamps 
        6 - 6 Lamps 
    (2) Wattage (length)
        32   - 32WT8
        28T5 - 28W T5
        49T5 - 49W T5HO
        51T5 - 51W T5HO
        54T5 - 54W T5HO
    (4) Voltage
        120V - 120 Volt
        277V - 277 Volt
        347V - 347 Volt
        UNV  - Universal Voltage 120/277 Volt
        UNC  - Universal Voltage 347/480 Volt
    (5) Fusing
        Blank - No fuse
        GL - Single element fuse
        GM - Double element fuse
        EL - Emergency Listed
    (6) Ballast – Type and number of ballasts
        EB8 (1 or 2) - T8 Electronic Instant Start; THD < 10 % (1 or 2 ballasts)
        EB8 (1 or 2)/PLUS - T8 Electronic Instant Start; HBF >1.15%; THD < 10 % (1 or 
        2 ballasts)
        ER8 (1 or 2) - T8 Electronic Program Rapid Start; THD < 10% (1 or 
        2 ballasts)
        ER8 (1OR 2)/PLUS - T8 Electronic Program Rapid Start; HBF >1.15%; THD < 10 % (1 or 
        2 ballasts)
        EBT (1 or 2) - T5 or T5HO Linear Electronic Program Rapid Start; THD < 10% (1 or 
        2 ballasts)
        EHT (1 or 2) - T5HO Linear Electronic Start High Ambient; THD < 10%; starting 
        temperature < 0°F
    (7) Wet location rating
        Blank - Not Wet Location Rated
        WL    - Wet Location Rated
[5] (9) Packaging
        PALC - Job pack in carton
        U    - Unit pack
[6] (3) Lens:
        DR - Internal prismatic lens / 15% DR high impact additive (standard)
        DR-100% - 100% High impact additive
        LEX - High impact clear polycarbonate LEXAN lens/low brightness pattern
    (5) Options:
        DD     - Deep diffuser
        PI/CPI - Plug in option
        RIF1   - Radio interference suppressor
        SSL    - Stainless steel latches
        TH     - (2) Top watertite hubs
        TEH    - (2) Top and (2) end watertie hubs
        TILW   - Tandm in-line wiring
        M4     - Specular reflector
[7] (3) Lens:
        DR - Internal prismatic cens / 15% DR high impact additive (standard)
        DR-100% - 100% High impact additive
        LEX - High impact clear polycarbonate LEXAN lens/low brightness pattern
    (8) Number of ballast
        1 - 1 Ballast
        2 - 2 Ballasts
    (9) Options:
        8L - 8 Latches
        BKS - (2) Snap on brackets for Chain or Surface Mount
        GT4 - Stock Product Only
        M4 - Specular Reflector
        RIF1 - Radio Interference Suppressor
        SSL - Stainless Steel Latches
        TH - (2) Top Watertite Hubs
        TEH - (2) Top and (2) End Watertie Hubs
        VRS - Vandal Resistant Screws for Latches
[8] (9) Packaging
        U - Unit pack
[9] (3) Lens
        PCR – Lineal ribs polycarbonate (standard)
    (8) Options
        Blank - 2 end Watertite hubs
        C3 - 3’ Power Cord
        C6 - 6’ Power Cord
        PC3 - 3’ Power Cord and Plug
        PC6 - 6’ Power Cord and Plug
        SSL - Stainless Steel Latches
        VRS - Vandal Resistant Screws for Latches
[10] (3) Distribution
         M - Medium beam
         W - Wide beam
     (9) Options
         Blank - 2 end watertite hubs
         C3    - 3’ Power cord
         C6    - 6’ Power cord
         PC3   - 3’ Power cord and plug
         PC6   - 6’ Power cord and plug
         VRS   - Vandal resistant screws for latches
     (11) Lens
          DR - Clear acrylic high impact (standard)
          PC - Polycarbonate, clear

LED Industrial/Vaportite Lighting Fixture for Splash and Non-food Zones[11]
  VT4LED-(1)-(2)-(3)-(4)-(5)-(6)-(7)-(8)-(9)-(10)
  
[11] (1) 3 digit alpha numeric value indicating lamp type 
     (2) 2 digit numerical value indicating lumens 
     (3) 2 or 3 digit alpha charter indicating lens type 
     (4) 3 or 4 digit alpha numeric value indicating voltage 
     (5) 4 digit alpha numeric value indicating color temp 
     (6) Optional suffix for emergency option 
     (7) 3 digit alph numeric value indicating driver type and number 
     (8) Optional suffix WL = Wet Label 
     (9) Alpha numeric suffix indicating options 
         Blank  - Plastic latches and (2) end watertight hubs (all watertight hubs 
         have 1/2" conduit entry) 
         C3     - 3' Power cord 
         C6     - 6' Power cord 
         PC3-   - 3' Power cord & plug (specify voltage) 
         PC6-   - 6' Power cord & plug (specify voltage) 
         VRS    - Vandal resistant screws for latches 
         MS     - Damp listed motion sensor 
         MSO/WL - Wet listed motion sensor 360 
         SSL    - Stainless steel latches 
     (10) Alpha charter indicating packaging

Vandal-resistant LED Vaportite Light Fixtures for Splash & Non-Food Zone
  4VRVT1-SL3C3
  8VRVT1-SL3C3

Number of matching Manufacturers is 1
Number of matching Products is 104
Processing time was 0 seconds