NSF Product and Service Listings

[1] With prefix 1 or 6 for selling division.
[2] Sink Numbering System   
    (A)   Designates the number hole required: 1 - single 2 - double    
    (CCC) Designates the width of the sink: 3 digits for height, last 
          being a code for # of 1/8 inches (4 - 4/8 or 1/2)    
    (DDD) Designates the width of the sink: 3 digits for height, last 
          being a code for # of 1/8 inches (4 - 4/8 or 1/2)    
    (EEE) Designates the width of the sink: 3 digits for height, last 
          being a code for #of 1/8 inches (4 - 4/8 or 1/2)    
    *model may or may not be followed by a letter indicting size down to 1/16"

[1] With prefix 1 or 6 for selling division.
[3] For use with walk-in refridgerators and freezers.
[4] (1) Width of system in inches.
[5] Company name, model number, and "NSF" appears on label on outside of box for all models
    except vaporproof fixtures, wells, and exhaust canopy lights which carry all markings on
    the product.

[1] With prefix 1 or 6 for selling division.

[1] With prefix 1 or 6 for selling division.
[69] (1) Two alphanumeric digits representing foot type.
         (00) Die-cast flange foot
         (HF) Hex foot.
         (F2) Stainless steel flange with mounting holes.
     (2) One alphanumeric digit representing foot material
         (0) Die-cast/Stainless Steel.
         (2) Plastic.
     (3) One alphanumeric digit representing stud size.
         (0) 3/8-16 Thru. 
         (2) 3/8-16 Flush. 
         (1) 1/2-13 Thru. 
         (3) 1/2-13 Flush
         (4) 1/4-20 Thru
         (5) 1/4-20 Flush
     (4) One alphanumeric digit representing the body color.
         (4) Black body.
         (8) Nickel body.

[1] With prefix 1 or 6 for selling division.

[1] With prefix 1 or 6 for selling division.
[9] (1) Three digit alphanumeric code for color or specific packaging requirements.
    (2) 3 Digits for Length in inches.

[1] With prefix 1 or 6 for selling division.
[12] (1) Digits 6 and 7 for foot type:
         OO - No foot
         45 - With adjustable foot 61645
         50 - With adjustable foot 61650
         51 - With adjustable foot 61651
         61 - With adjustable foot 61661
         C2 - 2" Diameter caster wheel
         C3 - 3" Diameter caster wheel
         C4 - 4" Diameter caster wheel
         C5 - 5" Diameter caster wheel
         C6 - 6" Diameter caster wheel
         FF - Flanged foot
         FS - Flanged seismic foot
         F2 - 2 Hole flanged foot
         F3 - 3 Hole flanged foot
         HF - Hexagonal foot
         NG - Nylon glide
         NR - Nylon round glide
         PG - Plastic glide
         PS - Plastic glide special adjustment
         P3 - Plastic glide 3" adjustable
         RF - Round Weld Fill Foot   
     (2) Digits 8 and 9 are for length:
         8  - Whole inch increments; 3 numerical 2" through 9.
         Dimensions of 10" and longer are alphabetical: A - 10"; B - 11", etc.
         Letters "I" (India) and "O" (Oscar) are not used.
         9  - 1/10 inch increments in decimal form; or
         K  - Zinc plated mild steel
     (3) 10 - Mounting Type
         Studs: O - None, F - Flush, L - Special, T - Through
         Plates: M - 1783, N - 1780, P - 1785, R - 1780-24, S - Special
         Other: W - Weld top
[13] Last digit "B" denotes furnished with brake.

[1] With prefix 1 or 6 for selling division.
[12] (1) Digits 6 and 7 for foot type:
         OO - No foot
         45 - With adjustable foot 61645
         50 - With adjustable foot 61650
         51 - With adjustable foot 61651
         61 - With adjustable foot 61661
         C2 - 2" Diameter caster wheel
         C3 - 3" Diameter caster wheel
         C4 - 4" Diameter caster wheel
         C5 - 5" Diameter caster wheel
         C6 - 6" Diameter caster wheel
         FF - Flanged foot
         FS - Flanged seismic foot
         F2 - 2 Hole flanged foot
         F3 - 3 Hole flanged foot
         HF - Hexagonal foot
         NG - Nylon glide
         NR - Nylon round glide
         PG - Plastic glide
         PS - Plastic glide special adjustment
         P3 - Plastic glide 3" adjustable
         RF - Round Weld Fill Foot   
     (2) Digits 8 and 9 are for length:
         8  - Whole inch increments; 3 numerical 2" through 9.
         Dimensions of 10" and longer are alphabetical: A - 10"; B - 11", etc.
         Letters "I" (India) and "O" (Oscar) are not used.
         9  - 1/10 inch increments in decimal form; or
         K  - Zinc plated mild steel
     (3) 10 - Mounting Type
         Studs: O - None, F - Flush, L - Special, T - Through
         Plates: M - 1783, N - 1780, P - 1785, R - 1780-24, S - Special
         Other: W - Weld top
[13] Last digit "B" denotes furnished with brake.

[1] With prefix 1 or 6 for selling division.
[14] (1) Two digits for wheel diameter
     (2) 'R' denotes ridged caster
     (3) Two, three, four, or five digits for mounting type
     (4) Two, three, or four digits for wheel type
     (5) May include TLB suffix for brake option
[15] The two digit numeric represents different yolk sizes and construction.

[1] With prefix 1 or 6 for selling division.
[17] P(1) suffix designates optional PathoGuard antimicrobial coating. (1) - 1 thru 9
     designating color or finish. Note: Not tested by NSF for efficacy at limiting the spread
     of bacteria. P(1) may optionally replace zeros internal to the part number.
[18] (1) With or without suffix 11-15 denotes cylinder.
[19] (1) With suffix 05 through 55 denoting a length of handle, finish options brushed, satin
     or powder coat, shipped complete or as an assembly, and/or with a rear mounting option.
[20] With or without suffixes for finish and length options.
[72] Powder Coat finish options are available with or without suffixes, or letters to replace
     zero in part number
     W       - White
     T or S  - Tuffcoat (Stardust Silver or EP6779024 Gray Powder Coat Finish)
     B or BK - Black
     B or BL - Blue
     BC      - Bonded Chrome
     G       - Gray
     Y       - Yellow

[1] With prefix 1 or 6 for selling division.

[1] With prefix 1 or 6 for selling division.
[21] (1) The last two digits represent different offset strike hooks for different
         thickness door and different finishes.
     (2) Digit 5 will contain an "S" for optional slow speed action or "0" for
         standard.
     (3) Digit 6 indicates customer specific item by letter abbreviation or "0" for
         standard. May include "P" denoting PathoGuard antimicrobial material.
     Note: Not tested for efficacy at limiting the spread of bacteria.
     (4) Digit 7 and 8 indicate color of cover by letter abbreviation. "00" for
         standard.
     (5) Digit 6 may contain designation for alternate spring forces "0" for standard
     (6) Digits 7 and 8 designate options for alternate door offsets, "00" for standard
     (7) Digits 9 and 10 designate packaging and finish, "04" for standard finish
[72] Powder Coat finish options are available with or without suffixes, or letters to replace
     zero in part number
     W       - White
     T or S  - Tuffcoat (Stardust Silver or EP6779024 Gray Powder Coat Finish)
     B or BK - Black
     B or BL - Blue
     BC      - Bonded Chrome
     G       - Gray
     Y       - Yellow

[1] With prefix 1 or 6 for selling division.

[1] With prefix 1 or 6 for selling division.

[1] With prefix 1 or 6 for selling division.
[22] (1) Two digit suffix indicating length in inches.

[1] With prefix 1 or 6 for selling division.
[8] Powder Coat finish options are available with or without suffixes, or letters to replace
    zero in part number
    W       - White
    T or S  - Tuffcoat (Stardust Silver or EP6779024 Gray Powder Coat Finish) 
    B or BK - Black
    G       - Gray
[17] P(1) suffix designates optional PathoGuard antimicrobial coating. (1) - 1 thru 9
     designating color or finish. Note: Not tested by NSF for efficacy at limiting the spread
     of bacteria. P(1) may optionally replace zeros internal to the part number.

[1] With prefix 1 or 6 for selling division.
[23] (1) Suffix xxxx - Cut lengths of inches.

[1] With prefix 1 or 6 for selling division.

[1] With prefix 1 or 6 for selling division.
[25] (1) Length in inches.
     (2) Depth in inches.
     (3) May include suffix S indicating stainless steel top or all stainless steel.

[1] With prefix 1 or 6 for selling division.
[26] Shipped as 61801G 00003 (housing) and 61801 000004 (globe).
[27] Shipped as 61801G 00003 (housing), 61801 000004 (globe), and 61801G 00002 (wire guard).
[28] 8 digit suffix as follows:
     (1) 2 digit number representing color & temperature of the LED
     (2) 2 digit number: 00 for standard square or width in whole inches
     (3) 2 digit number: 00 for standard square or length in whole inches
     (4) 0 - or no designation uses universal ballast
     1 - 120V input
     2 - 277V input
     3 - 208V input
     4 - 240V input
     (5) Customer specific packaging option
[79] Shipped as 61801UK 0003 (housing), 61801 000004 (globe), and 61801G 00002 (wire guard).

[1] With prefix 1 or 6 for selling division.
[29] Powder Coat finish options are available with or without suffixes:
     W      - White
     T or S - Tuffcoat (Stardust Silver or EP6779024 Gray Powder Coat Finish) 
     B      - Black

[1] With prefix 1 or 6 for selling division.

[1] With prefix 1 or 6 for selling division.
[12] (1) Digits 6 and 7 for foot type:
         OO - No foot
         45 - With adjustable foot 61645
         50 - With adjustable foot 61650
         51 - With adjustable foot 61651
         61 - With adjustable foot 61661
         C2 - 2" Diameter caster wheel
         C3 - 3" Diameter caster wheel
         C4 - 4" Diameter caster wheel
         C5 - 5" Diameter caster wheel
         C6 - 6" Diameter caster wheel
         FF - Flanged foot
         FS - Flanged seismic foot
         F2 - 2 Hole flanged foot
         F3 - 3 Hole flanged foot
         HF - Hexagonal foot
         NG - Nylon glide
         NR - Nylon round glide
         PG - Plastic glide
         PS - Plastic glide special adjustment
         P3 - Plastic glide 3" adjustable
         RF - Round Weld Fill Foot   
     (2) Digits 8 and 9 are for length:
         8  - Whole inch increments; 3 numerical 2" through 9.
         Dimensions of 10" and longer are alphabetical: A - 10"; B - 11", etc.
         Letters "I" (India) and "O" (Oscar) are not used.
         9  - 1/10 inch increments in decimal form; or
         K  - Zinc plated mild steel
     (3) 10 - Mounting Type
         Studs: O - None, F - Flush, L - Special, T - Through
         Plates: M - 1783, N - 1780, P - 1785, R - 1780-24, S - Special
         Other: W - Weld top
[29] Powder Coat finish options are available with or without suffixes:
     W      - White
     T or S - Tuffcoat (Stardust Silver or EP6779024 Gray Powder Coat Finish) 
     B      - Black

[1] With prefix 1 or 6 for selling division.
[12] (1) Digits 6 and 7 for foot type:
         OO - No foot
         45 - With adjustable foot 61645
         50 - With adjustable foot 61650
         51 - With adjustable foot 61651
         61 - With adjustable foot 61661
         C2 - 2" Diameter caster wheel
         C3 - 3" Diameter caster wheel
         C4 - 4" Diameter caster wheel
         C5 - 5" Diameter caster wheel
         C6 - 6" Diameter caster wheel
         FF - Flanged foot
         FS - Flanged seismic foot
         F2 - 2 Hole flanged foot
         F3 - 3 Hole flanged foot
         HF - Hexagonal foot
         NG - Nylon glide
         NR - Nylon round glide
         PG - Plastic glide
         PS - Plastic glide special adjustment
         P3 - Plastic glide 3" adjustable
         RF - Round Weld Fill Foot   
     (2) Digits 8 and 9 are for length:
         8  - Whole inch increments; 3 numerical 2" through 9.
         Dimensions of 10" and longer are alphabetical: A - 10"; B - 11", etc.
         Letters "I" (India) and "O" (Oscar) are not used.
         9  - 1/10 inch increments in decimal form; or
         K  - Zinc plated mild steel
     (3) 10 - Mounting Type
         Studs: O - None, F - Flush, L - Special, T - Through
         Plates: M - 1783, N - 1780, P - 1785, R - 1780-24, S - Special
         Other: W - Weld top
[29] Powder Coat finish options are available with or without suffixes:
     W      - White
     T or S - Tuffcoat (Stardust Silver or EP6779024 Gray Powder Coat Finish) 
     B      - Black

[1] With prefix 1 or 6 for selling division.
[29] Powder Coat finish options are available with or without suffixes:
     W      - White
     T or S - Tuffcoat (Stardust Silver or EP6779024 Gray Powder Coat Finish) 
     B      - Black
[31] (1) Digits 6 and 7 for foot type:
         F2 - 2 hole flanged foot
         FF - Flanged foot
         HF - Hex foot
         NF - Nylon flanged foot
         PG - Plastic glide foot
         RF - Round foot
     (2) Digits 8 and 9 for the length:
         Digit 8 - Whole inch increments (3 thru 9)
         Digit 9 - 1/10 inch increments in decimal form
     (3) Digit 10 for mounting type:
         F - Flush stud
         L - Special length stud
         M - 1783 plate
         N - 1780 plate
         P - 1785 plate
         S - Special plate
         T - Through stud
     (4) Digit 11 for stud size: 0 - None, 3 - 3/8, 5 - 1/2, 6 - 5/8, 7 - 3/4

[1] With prefix 1 or 6 for selling division.
[12] (1) Digits 6 and 7 for foot type:
         OO - No foot
         45 - With adjustable foot 61645
         50 - With adjustable foot 61650
         51 - With adjustable foot 61651
         61 - With adjustable foot 61661
         C2 - 2" Diameter caster wheel
         C3 - 3" Diameter caster wheel
         C4 - 4" Diameter caster wheel
         C5 - 5" Diameter caster wheel
         C6 - 6" Diameter caster wheel
         FF - Flanged foot
         FS - Flanged seismic foot
         F2 - 2 Hole flanged foot
         F3 - 3 Hole flanged foot
         HF - Hexagonal foot
         NG - Nylon glide
         NR - Nylon round glide
         PG - Plastic glide
         PS - Plastic glide special adjustment
         P3 - Plastic glide 3" adjustable
         RF - Round Weld Fill Foot   
     (2) Digits 8 and 9 are for length:
         8  - Whole inch increments; 3 numerical 2" through 9.
         Dimensions of 10" and longer are alphabetical: A - 10"; B - 11", etc.
         Letters "I" (India) and "O" (Oscar) are not used.
         9  - 1/10 inch increments in decimal form; or
         K  - Zinc plated mild steel
     (3) 10 - Mounting Type
         Studs: O - None, F - Flush, L - Special, T - Through
         Plates: M - 1783, N - 1780, P - 1785, R - 1780-24, S - Special
         Other: W - Weld top
[29] Powder Coat finish options are available with or without suffixes:
     W      - White
     T or S - Tuffcoat (Stardust Silver or EP6779024 Gray Powder Coat Finish) 
     B      - Black
[32] With suffix BO, SB, BC, GP, BP, BN or FB
[33] With suffix 5, 6 or 7 and T or F for different stud mounting options.

[1] With prefix 1 or 6 for selling division.
[34] (1) Two digits indicating length and insulators.

[1] With prefix 1 or 6 for selling division.
[29] Powder Coat finish options are available with or without suffixes:
     W      - White
     T or S - Tuffcoat (Stardust Silver or EP6779024 Gray Powder Coat Finish) 
     B      - Black

[1] With prefix 1 or 6 for selling division.
[29] Powder Coat finish options are available with or without suffixes:
     W      - White
     T or S - Tuffcoat (Stardust Silver or EP6779024 Gray Powder Coat Finish) 
     B      - Black

[1] With prefix 1 or 6 for selling division.
[5] Company name, model number, and "NSF" appears on label on outside of box for all models
    except vaporproof fixtures, wells, and exhaust canopy lights which carry all markings on
    the product.
[35] (1) Size in inches; Height (2 digit) Width (2 digit) example: 1416, 1420, 1616….
     (2) D or 0: Bright finish or mil finish stainless

[1] With prefix 1 or 6 for selling division.
[5] Company name, model number, and "NSF" appears on label on outside of box for all models
    except vaporproof fixtures, wells, and exhaust canopy lights which carry all markings on
    the product.
[35] (1) Size in inches; Height (2 digit) Width (2 digit) example: 1416, 1420, 1616….
     (2) D or 0: Bright finish or mil finish stainless

[1] With prefix 1 or 6 for selling division.

[1] With prefix 1 or 6 for selling division.
[37] 2 to 4 digits may be added to end of catalog number denoting special wall thickness. The
     left justified zeros in these model numbers may be replaced with P or P(1) to
     designate PathoGuard antimicrobial coating. (1) - 1 thru 9 designating color or finish.
     Note: Not tested by NSF for efficacy at limiting the spread of bacteria.
[38] (1) With suffix 04-14. The left justified zeros in these model numbers may be replaced
     with P or P(1) to designate PathoGuard antimicrobial coating. (1) - 1 thru 9 designating
     color or finish. Note: Not tested by NSF for efficacy at limiting the spread of bacteria.
[72] Powder Coat finish options are available with or without suffixes, or letters to replace
     zero in part number
     W       - White
     T or S  - Tuffcoat (Stardust Silver or EP6779024 Gray Powder Coat Finish)
     B or BK - Black
     B or BL - Blue
     BC      - Bonded Chrome
     G       - Gray
     Y       - Yellow

[1] With prefix 1 or 6 for selling division.

[1] With prefix 1 or 6 for selling division.
[8] Powder Coat finish options are available with or without suffixes, or letters to replace
    zero in part number
    W       - White
    T or S  - Tuffcoat (Stardust Silver or EP6779024 Gray Powder Coat Finish) 
    B or BK - Black
    G       - Gray
[39] (1) With suffix BC, BL, BN, BO, BS, OT, PL, PZ, SC, SS, or SB.
     (2) With suffix 0O, 0S, 01, 1S, 5F, 5M, 5T, 6F, or 6T.

[1] With prefix 1 or 6 for selling division.
[8] Powder Coat finish options are available with or without suffixes, or letters to replace
    zero in part number
    W       - White
    T or S  - Tuffcoat (Stardust Silver or EP6779024 Gray Powder Coat Finish) 
    B or BK - Black
    G       - Gray
[40] With suffix BO, SB, BC, GP, BP, BN or FB.
[41] With suffix 5, 6 or 7 and T or F for different stud mounting options.
[42] With suffix 4 or 6 for the quantity in the package.
[43] With or without suffix letter A - Z for specific packaging.

[1] With prefix 1 or 6 for selling division.
[8] Powder Coat finish options are available with or without suffixes, or letters to replace
    zero in part number
    W       - White
    T or S  - Tuffcoat (Stardust Silver or EP6779024 Gray Powder Coat Finish) 
    B or BK - Black
    G       - Gray
[39] (1) With suffix BC, BL, BN, BO, BS, OT, PL, PZ, SC, SS, or SB.
     (2) With suffix 0O, 0S, 01, 1S, 5F, 5M, 5T, 6F, or 6T.

[1] With prefix 1 or 6 for selling division.
[8] Powder Coat finish options are available with or without suffixes, or letters to replace
    zero in part number
    W       - White
    T or S  - Tuffcoat (Stardust Silver or EP6779024 Gray Powder Coat Finish) 
    B or BK - Black
    G       - Gray
[39] (1) With suffix BC, BL, BN, BO, BS, OT, PL, PZ, SC, SS, or SB.
     (2) With suffix 0O, 0S, 01, 1S, 5F, 5M, 5T, 6F, or 6T.

[1] With prefix 1 or 6 for selling division.

[1] With prefix 1 or 6 for selling division.

[1] With prefix 1 or 6 for selling division.
[29] Powder Coat finish options are available with or without suffixes:
     W      - White
     T or S - Tuffcoat (Stardust Silver or EP6779024 Gray Powder Coat Finish) 
     B      - Black
[44] (1) 004 through 012, 500, 625.
     (2) With or without suffix to denote special length.
[45] For use with NSF Listed adjustable feet.

[1] With prefix 1 or 6 for selling division.
[12] (1) Digits 6 and 7 for foot type:
         OO - No foot
         45 - With adjustable foot 61645
         50 - With adjustable foot 61650
         51 - With adjustable foot 61651
         61 - With adjustable foot 61661
         C2 - 2" Diameter caster wheel
         C3 - 3" Diameter caster wheel
         C4 - 4" Diameter caster wheel
         C5 - 5" Diameter caster wheel
         C6 - 6" Diameter caster wheel
         FF - Flanged foot
         FS - Flanged seismic foot
         F2 - 2 Hole flanged foot
         F3 - 3 Hole flanged foot
         HF - Hexagonal foot
         NG - Nylon glide
         NR - Nylon round glide
         PG - Plastic glide
         PS - Plastic glide special adjustment
         P3 - Plastic glide 3" adjustable
         RF - Round Weld Fill Foot   
     (2) Digits 8 and 9 are for length:
         8  - Whole inch increments; 3 numerical 2" through 9.
         Dimensions of 10" and longer are alphabetical: A - 10"; B - 11", etc.
         Letters "I" (India) and "O" (Oscar) are not used.
         9  - 1/10 inch increments in decimal form; or
         K  - Zinc plated mild steel
     (3) 10 - Mounting Type
         Studs: O - None, F - Flush, L - Special, T - Through
         Plates: M - 1783, N - 1780, P - 1785, R - 1780-24, S - Special
         Other: W - Weld top
[29] Powder Coat finish options are available with or without suffixes:
     W      - White
     T or S - Tuffcoat (Stardust Silver or EP6779024 Gray Powder Coat Finish) 
     B      - Black
[45] For use with NSF Listed adjustable feet.

[1] With prefix 1 or 6 for selling division.
[29] Powder Coat finish options are available with or without suffixes:
     W      - White
     T or S - Tuffcoat (Stardust Silver or EP6779024 Gray Powder Coat Finish) 
     B      - Black
[71] Last three digits can be replaced with suffix "301" to indicate triangle-shaped mounting
     plate.

[1] With prefix 1 or 6 for selling division.
[46] May include the following:
     (1) W - Alternate internal wiring.
     (2) LMP or B - Lamp included.
     (3) Alphanumeric characters for customer specific requirements.
[70] May include the following:
         (1) 12, 240v, 277 Alternate voltage.
         (2) Alphanumeric characters for lens color.
         (3) Alphanumeric characters for customer specific requirements.

[1] With prefix 1 or 6 for selling division.

[1] With prefix 1 or 6 for selling division.
[74] (1) Two digit suffix indicating the drain size and stopper.
     (2) Two digit suffix indicating length of tube in inches.

[1] With prefix 1 or 6 for selling division.
[49] With suffix 06 through 72 for inches in length.  Optional alpha suffix after the length
     code to denote customer special packaging or hole spacing.
[72] Powder Coat finish options are available with or without suffixes, or letters to replace
     zero in part number
     W       - White
     T or S  - Tuffcoat (Stardust Silver or EP6779024 Gray Powder Coat Finish)
     B or BK - Black
     B or BL - Blue
     BC      - Bonded Chrome
     G       - Gray
     Y       - Yellow

[1] With prefix 1 or 6 for selling division.

[1] With prefix 1 or 6 for selling division.

[1] With prefix 1 or 6 for selling division.
[37] 2 to 4 digits may be added to end of catalog number denoting special wall thickness. The
     left justified zeros in these model numbers may be replaced with P or P(1) to
     designate PathoGuard antimicrobial coating. (1) - 1 thru 9 designating color or finish.
     Note: Not tested by NSF for efficacy at limiting the spread of bacteria.
[72] Powder Coat finish options are available with or without suffixes, or letters to replace
     zero in part number
     W       - White
     T or S  - Tuffcoat (Stardust Silver or EP6779024 Gray Powder Coat Finish)
     B or BK - Black
     B or BL - Blue
     BC      - Bonded Chrome
     G       - Gray
     Y       - Yellow

[1] With prefix 1 or 6 for selling division.
[17] P(1) suffix designates optional PathoGuard antimicrobial coating. (1) - 1 thru 9
     designating color or finish. Note: Not tested by NSF for efficacy at limiting the spread
     of bacteria. P(1) may optionally replace zeros internal to the part number.

[1] With prefix 1 or 6 for selling division.

[1] With prefix 1 or 6 for selling division.
[76] (2) “CL” – continuous length
     (3) color temp –00 (no designation), CW, WW or 2 digit number for color temp
     (4) length – 2 digit (example 24 - 24 inch)
     (5) kit – optional packing requirement

[1] With prefix 1 or 6 for selling division.
[54] With suffix 1-4 for panel thickness.

[1] With prefix 1 or 6 for selling division.

[1] With prefix 1 or 6 for selling division.
[73] (1) Three digit numerical suffix indicating handle length in inches.
     (2) One digit numerical suffix indicating flange design of width and height.

[1] With prefix 1 or 6 for selling division.

[55] Strip curtains for use in walk-in refrigerators or freezers.
[56] (1) Two digit code, 00-20 indicating vinyl material.
     (2) Series Code: SA, SC, LA or LC
     (3) Strip Thickness: 6 - 0.06, 8 - 0.08, 1 - 0.12, 2 - 0.16
     (4) Strip Width: 04, 06, 08, 12, 16
     (5) Door opening 'Width X Height' in inches shown as a 4 to 6 digit numerical value.
     (6) With or without a 3 digit alpha numeric code to denote special overlap 
         or packaging.

[1] With prefix 1 or 6 for selling division.

[1] With prefix 1 or 6 for selling division.
[68] With or without one digit suffix 3 of 4 when packaged with internal 3-way or 4-way
     switch assembly.

[1] With prefix 1 or 6 for selling division.

[2] With prefix 1 or 6 for selling division.
[3] Sink Numbering System   
    (A)   Designates the number hole required: 1 - single 2 - double    
    (CCC) Designates the width of the sink: 3 digits for height, last 
          being a code for # of 1/8 inches (4 - 4/8 or 1/2)    
    (DDD) Designates the width of the sink: 3 digits for height, last 
          being a code for # of 1/8 inches (4 - 4/8 or 1/2)    
    (EEE) Designates the width of the sink: 3 digits for height, last 
          being a code for #of 1/8 inches (4 - 4/8 or 1/2)    
    *model may or may not be followed by a letter indicting size down to 1/16"

[2] With prefix 1 or 6 for selling division.
[4] For use with walk-in refridgerators and freezers.
[5] (1) Width of system in inches.

[2] With prefix 1 or 6 for selling division.
[6] Supplied in knocked down form and consists of the following part numbers:
    11467R0001 or 11467000001 - Flange
    11467000002 - Strap
    11467000003 - Adjustable plate
    11467000004 - Cover
    11467000005 - Cam
    11467000006 - Plug for flange
[7] Followed by suffixes:
    (1) Either 0, R, or T for recessed mounting or non-lift off option.
    (2) 00001 through 00016 for successive variants of finish or component parts.
[78] Powder Coat finish options are available with or without suffixes, or letters to replace
     zero in part number
     W       - White
     T or S  - Tuffcoat (Stardust Silver or EP6779024 Gray Powder Coat Finish)
     B or BK - Black
     B or BL - Blue
     BC      - Bonded Chrome
     G       - Gray
     Y       - Yellow
[88] May or may not included optional Micro switch part # 1367S

[2] With prefix 1 or 6 for selling division.
[82] Part number options: 
     (1) Bypass lock -position 6 one digit code denoting style of bypass lock. 0 for standard
     , K for push knob 
     (2) Alphanumeric for lock orientation, position 10 denotes right hand or left hand
     (example 6 - left hand, 7 - right hand)

[2] With prefix 1 or 6 for selling division.

[2] With prefix 1 or 6 for selling division.
[9] (1) Three digit alphanumeric code for color or specific packaging requirements.
    (2) 3 Digits for Length in inches.

[2] With prefix 1 or 6 for selling division.
[10] (1) With suffix 004-138.
     (2) With suffix 04-48.
     (3) With suffix 02-22.
     (4) With suffix 4, 5, 4C, 5C, 6, 6C, 0 or 14.
     (5) Internal zeros may be replaced with "S" when Spring Kits 125500000* are included
     'with the hinge, and A when the hinges with kits are supplied Assembled.
[78] Powder Coat finish options are available with or without suffixes, or letters to replace
     zero in part number
     W       - White
     T or S  - Tuffcoat (Stardust Silver or EP6779024 Gray Powder Coat Finish)
     B or BK - Black
     B or BL - Blue
     BC      - Bonded Chrome
     G       - Gray
     Y       - Yellow
[88] May or may not included optional Micro switch part # 1367S

[2] With prefix 1 or 6 for selling division.
[11] (1) With suffix 08-43.
     (2) With suffix 04-44.
[78] Powder Coat finish options are available with or without suffixes, or letters to replace
     zero in part number
     W       - White
     T or S  - Tuffcoat (Stardust Silver or EP6779024 Gray Powder Coat Finish)
     B or BK - Black
     B or BL - Blue
     BC      - Bonded Chrome
     G       - Gray
     Y       - Yellow

[2] With prefix 1 or 6 for selling division.

[2] With prefix 1 or 6 for selling division.
[12] (1) Two digits for wheel diameter
     (2) 'R' denotes ridged caster
     (3) Two, three, four, or five digits for mounting type
     (4) Two, three, or four digits for wheel type
     (5) May include TLB suffix for brake option
[13] The two digit numeric represents different yolk sizes and construction.

[2] With prefix 1 or 6 for selling division.
[15] Followed by suffixes:
     (1) One, two, or three digit suffix for cord length, voltage and wattage options.
     (2) May be blank, A, B, E, G, or T for special electrical cord and plug options.

[2] With prefix 1 or 6 for selling division.
[16] Accepted with suffix number 44 to 59 for cylinder number and chrome or brushed chrome
     finishes.

[2] With prefix 1 or 6 for selling division.
[17] (1) With or without suffix 11-15 denotes cylinder.
[18] (1) With suffix 05 through 55 denoting a length of handle, finish options brushed, satin
     or powder coat, shipped complete or as an assembly, and/or with a rear mounting option
[19] P(1) suffix designates optional PathoGuard antimicrobial coating. (1) - 1 thru 9
     designating color or finish. Note: Not tested by NSF for efficacy at limiting the spread
     of bacteria. P(1) may optionally replace zeros internal to the part number.
[20] With or without suffixes for finish and length options.
[78] Powder Coat finish options are available with or without suffixes, or letters to replace
     zero in part number
     W       - White
     T or S  - Tuffcoat (Stardust Silver or EP6779024 Gray Powder Coat Finish)
     B or BK - Black
     B or BL - Blue
     BC      - Bonded Chrome
     G       - Gray
     Y       - Yellow

[2] With prefix 1 or 6 for selling division.

[2] With prefix 1 or 6 for selling division.
[21] (1) The last two digits represent different offset strike hooks for different 
         thickness door and different finishes.
     (2) Digit 5 will contain an "S" for optional slow speed action or "0" for 
         standard.
     (3) Digit 6 indicates customer specific item by letter abbreviation or "0" for
         standard. May include "P" denoting PathoGuard antimicrobial material.  
         Note: Not tested for efficacy at limiting the spread of bacteria.
     (4) Digit 7 and 8 indicate color of cover by letter abbreviation.  "00" for
         standard.
     (5) Digit 6 may contain designation for alternate spring forces "0" for standard
     (6) Digits 7 and 8 designate options for alternate door offsets, "00" for standard
     (7) Digits 9 and 10 designate packaging and finish and/or offset, "04" for standard 
         finish and/or flush.
[78] Powder Coat finish options are available with or without suffixes, or letters to replace
     zero in part number
     W       - White
     T or S  - Tuffcoat (Stardust Silver or EP6779024 Gray Powder Coat Finish)
     B or BK - Black
     B or BL - Blue
     BC      - Bonded Chrome
     G       - Gray
     Y       - Yellow

[2] With prefix 1 or 6 for selling division.

[2] With prefix 1 or 6 for selling division.

[2] With prefix 1 or 6 for selling division.
[22] (1) Two digit suffix indicating length in inches.

[2] With prefix 1 or 6 for selling division.
[8] Powder Coat finish options are available with or without suffixes, or letters to replace
    zero in part number
    W - White
    T or S - Tuffcoat (Stardust Silver Power Coat Finish)
    B or BK - Black
    G - Gray
[19] P(1) suffix designates optional PathoGuard antimicrobial coating. (1) - 1 thru 9
     designating color or finish. Note: Not tested by NSF for efficacy at limiting the spread
     of bacteria. P(1) may optionally replace zeros internal to the part number.

[2] With prefix 1 or 6 for selling division.
[23] (1) Suffix xxxx - Cut lengths of inches.

[2] With prefix 1 or 6 for selling division.

[2] With prefix 1 or 6 for selling division.
[24] (1) -X Denotes sold knocked down
     (2) XX Denotes products with different offset heights with or without spring 
         cartridge, or a Chrome or powder coated finish.
     (3) With or without a 3 digit alpha numeric code to denote special packaging.
[78] Powder Coat finish options are available with or without suffixes, or letters to replace
     zero in part number
     W       - White
     T or S  - Tuffcoat (Stardust Silver or EP6779024 Gray Powder Coat Finish)
     B or BK - Black
     B or BL - Blue
     BC      - Bonded Chrome
     G       - Gray
     Y       - Yellow

[2] With prefix 1 or 6 for selling division.
[8] Powder Coat finish options are available with or without suffixes, or letters to replace
    zero in part number
    W - White
    T or S - Tuffcoat (Stardust Silver Power Coat Finish)
    B or BK - Black
    G - Gray

[2] With prefix 1 or 6 for selling division.

[2] With prefix 1 or 6 for selling division.
[25] (1) Length in inches.
     (2) Depth in inches.
     (3) May include suffix S indicating stainless steel top or all stainless steel.

[2] With prefix 1 or 6 for selling division.
[26] Shipped as 61801G 00003 (housing) and 61801 000004 (globe).
[27] Shipped as 61801G 00003 (housing), 61801 000004 (globe), and 61801G 00002 (wire guard).
[28] 8 digit suffix as follows:
     (1) 2 digit number representing color & temperature of the LED
     (2) 2 digit number: 00 for standard square or width in whole inches
     (3) 2 digit number: 00 for standard square or length in whole inches
     (4) 0 - or no designation uses universal ballast
         1 - 120V input
         2 - 277V input
         3 - 208V input
         4 - 240V input
     (5) Customer specific packaging option
[86] Shipped as 61801UK 0003 (housing), 61801 000004 (globe), and 61801G 00002 (wire guard).

[2] With prefix 1 or 6 for selling division.
[21] (1) The last two digits represent different offset strike hooks for different 
         thickness door and different finishes.
     (2) Digit 5 will contain an "S" for optional slow speed action or "0" for 
         standard.
     (3) Digit 6 indicates customer specific item by letter abbreviation or "0" for
         standard. May include "P" denoting PathoGuard antimicrobial material.  
         Note: Not tested for efficacy at limiting the spread of bacteria.
     (4) Digit 7 and 8 indicate color of cover by letter abbreviation.  "00" for
         standard.
     (5) Digit 6 may contain designation for alternate spring forces "0" for standard
     (6) Digits 7 and 8 designate options for alternate door offsets, "00" for standard
     (7) Digits 9 and 10 designate packaging and finish and/or offset, "04" for standard 
         finish and/or flush.
[78] Powder Coat finish options are available with or without suffixes, or letters to replace
     zero in part number
     W       - White
     T or S  - Tuffcoat (Stardust Silver or EP6779024 Gray Powder Coat Finish)
     B or BK - Black
     B or BL - Blue
     BC      - Bonded Chrome
     G       - Gray
     Y       - Yellow

[2] With prefix 1 or 6 for selling division.
[78] Powder Coat finish options are available with or without suffixes, or letters to replace
     zero in part number
     W       - White
     T or S  - Tuffcoat (Stardust Silver or EP6779024 Gray Powder Coat Finish)
     B or BK - Black
     B or BL - Blue
     BC      - Bonded Chrome
     G       - Gray
     Y       - Yellow

[2] With prefix 1 or 6 for selling division.
[30] (1) Prefix 1 or 6 indicates division of sale
     (2) Digit 5 indicates standard (0) or (P) denoting PathoGuard antimicrobial material.
         Note: Not tested by NSF for efficacy at limiting the spread of bacteria.
     (3) Digit 6 indicates customer specific item by letter abbreviation (0 for standard)
     (4) Digit 7 indicates color of housing (0 for standard)
     (5) Digit 8 indicates color/style of insert (0 for standard)
     (6) With or without digits 11 and 12 to indicate key number
     (7) With or without digits 13 and 14 to indicate special wall thickness inches and
         decimal inch form.

[2] With prefix 1 or 6 for selling division.
[14] (1) Digits 6 and 7 for foot type:
         OO - No foot
         45 - With adjustable foot 61645
         50 - With adjustable foot 61650
         51 - With adjustable foot 61651
         C2 - 2" Diameter caster wheel
         C3 - 3" Diameter caster wheel
         C4 - 4" Diameter caster wheel
         C5 - 5" Diameter caster wheel
         C6 - 6" Diameter caster wheel
         FF - Flanged foot
         FS - Flanged seismic foot
         F2 - 2 Hole flanged foot
         F3 - 3 Hole flanged foot
         HF - Hexagonal foot
         NG - Nylon glide
         NR - Nylon round glide
         PG - Plastic glide
         PS - Plastic glide special adjustment
         P3 - Plastic glide 3" adjustable
         RF - Round Weld Fill Foot   
     (2) Digits 8 and 9 are for length:
         8  - Whole inch increments; 3 numerical 2" through 9.
         Dimensions of 10" and longer are alphabetical: A - 10"; B - 11", etc.
         Letters "I" (India) and "O" (Oscar) are not used.
         9  - 1/10 inch increments in decimal form; or
         K  - Zinc plated mild steel
     (3) 10 - Mounting Type
         Studs: O - None, F - Flush, L - Special, T - Through
         Plates: M - 1783, N - 1780, P - 1785, R - 1780-24, S - Special
         Other: W - Weld top
[29] Powder Coat finish options are available with or without suffixes:
     W - White
     T - Tuffcoat (Stardust Silver Powder Coat Finish)
     B - Black

[2] With prefix 1 or 6 for selling division.
[78] Powder Coat finish options are available with or without suffixes, or letters to replace
     zero in part number
     W       - White
     T or S  - Tuffcoat (Stardust Silver or EP6779024 Gray Powder Coat Finish)
     B or BK - Black
     B or BL - Blue
     BC      - Bonded Chrome
     G       - Gray
     Y       - Yellow
[79] (1) Suffix “S” to denote internal spring option, or “0” for standard.
     (2) Suffix "P" denoting PathoGuard antimicrobial coating option, or “0” for standard.
     Note: Not tested by NSF for efficacy at limiting the spread of bacteria.
     (3) Two or three digit alpha numeric suffix denoting internal changes or special
     packaging, “00” or “000” for standard.
     (4) Two digit alpha numeric suffix denoting left or right configuration, offset, and
     standard finish.

[2] With prefix 1 or 6 for selling division.
[33] (1) Two digits indicating length and insulators.

[1] Company name, model number, and "NSF" appears on label on outside of box for all models
    except vaporproof fixtures, wells, and exhaust canopy lights which carry all markings on
    the product.
[2] With prefix 1 or 6 for selling division.
[38] (1) Size in inches; Height (2 digit) Width (2 digit) example: 1416, 1420, 1616….
     (2) D or 0: Bright finish or mil finish stainless

[2] With prefix 1 or 6 for selling division.
[34] (1) Suffix denoting left or right configuration (0-99).  
         Hinge can be configured as left or right and have possible custom packing.  
     (2) Suffix denotes finish options (A-Z).  Finishes include brushed chrome, polished 
         chrome, direct chrome, satin brushed, grain direction and combinations of all 
         of the above. 
     (3) Suffix denotes offset (0-999).  Offsets go from flush to 9.99".  The offset 
         doesn't change the external design.

[2] With prefix 1 or 6 for selling division.
[8] Powder Coat finish options are available with or without suffixes, or letters to replace
    zero in part number
    W - White
    T or S - Tuffcoat (Stardust Silver Power Coat Finish)
    B or BK - Black
    G - Gray
[35] With Suffixes:
     (1) Numeric digit for spring strength
     (2) Numeric digit for hinge offset
     (3) 2 Digit code for combination of finish and style
     (4) 1 Alpha-Numeric code for material, where S is 300 Series Stainless steel, A is 
         Aluminum
     (5) 1 Alpha-Numeric code for customer specific packaging
[36] (1) Digit 5 indicates standard (0) or (P) denoting PathoGuard antimicrobial material.
         Note: Not tested by NSF for efficacy at limiting the spread of bacteria.
     (2) Digit 9 indicates offset
     (3) Digit 10 indicates cover style or hinge type 
     (4) Digits 11 and 12 indicate internal change (blank for standard) 
         Note: May indicate spring strength or other alternate mechanical variations.
     (5) Digit 13 indicates strap color: 
         B - Black
         G - Dark grey
         N - Gunmetal
         S - Silver
         Y - Nickel silver 
     (6) Indicates may be sold as a cover set (May be any combination of strap and flange
         covers and in any combination of colors).

[2] With prefix 1 or 6 for selling division.
[35] With Suffixes:
     (1) Numeric digit for spring strength
     (2) Numeric digit for hinge offset
     (3) 2 Digit code for combination of finish and style
     (4) 1 Alpha-Numeric code for material, where S is 300 Series Stainless steel, A is 
         Aluminum
     (5) 1 Alpha-Numeric code for customer specific packaging
[78] Powder Coat finish options are available with or without suffixes, or letters to replace
     zero in part number
     W       - White
     T or S  - Tuffcoat (Stardust Silver or EP6779024 Gray Powder Coat Finish)
     B or BK - Black
     B or BL - Blue
     BC      - Bonded Chrome
     G       - Gray
     Y       - Yellow

[2] With prefix 1 or 6 for selling division.
[37] (1) With suffix 0200-1500 denoting door thickness.
[83] (2) Digit 6 notes locking style for latch 
     (3) Digits 7-10 denotes door thickness 
     (4) Followed by suffix denoting key number and packaging
     (5) C maybe changed to A or L as well as replacing one to two zeros with alpha-numeric
     code to indicate internal changes

[2] With prefix 1 or 6 for selling division.

[1] Company name, model number, and "NSF" appears on label on outside of box for all models
    except vaporproof fixtures, wells, and exhaust canopy lights which carry all markings on
    the product.
[2] With prefix 1 or 6 for selling division.
[38] (1) Size in inches; Height (2 digit) Width (2 digit) example: 1416, 1420, 1616….
     (2) D or 0: Bright finish or mil finish stainless

[2] With prefix 1 or 6 for selling division.

[2] With prefix 1 or 6 for selling division.
[39] (1) 00  - Non-cylinder, regular spring       
         CH  - Cylinder locking, heavy spring      
         CL  - Cylinder locking, light spring      
         CP  - Cylinder locking, PathoGuard  
         CS  - Cylinder Locking, Shovel Handle
         CSH - Cylinder locking, Shovel Handle, Heavy Spring
         CV  - Cylinder locking, vertical handle     
         CX  - Cylinder locking, extra light spring      
         HO  - Heavy spring, non-cylinder      
         LO  - Light spring, non-cylinder
         SH  - Shovel Handle, Heavy Spring  
     	   S0  - Shovel handle, non-cylinder          
         VO  - Vertical handle, non-clinder 
         XL  - Extra light spring, non-cylinder     
     (2) Numbers denote body finish/handle material and/or offset combinations.
     (3), (4), and (5) Numbers indicate offset, body and handle finish combinations,
         key numbers latches without inside release provisions.
     (6) Designates PathoGuard antimicrobial coating in finish and color 1-9.  
         Note: not tested by NSF for efficacy at limiting the spread of bacteria.
[78] Powder Coat finish options are available with or without suffixes, or letters to replace
     zero in part number
     W       - White
     T or S  - Tuffcoat (Stardust Silver or EP6779024 Gray Powder Coat Finish)
     B or BK - Black
     B or BL - Blue
     BC      - Bonded Chrome
     G       - Gray
     Y       - Yellow

[2] With prefix 1 or 6 for selling division.
[40] 2 to 4 digits may be added to end of catalog number denoting special wall thickness. The
     left justified zeros in these model numbers may be replaced with P or P(1) to designate
     PathoGuard antimicrobial coating. (1) - 1 thru 9 designating color or finish. Note: Not
     tested by NSF for efficacy at limiting the spread of bacteria.
[41] (1) With suffix 04-14. The left justified zeros in these model numbers may be replaced
     with P or P(1) to designate PathoGuard antimicrobial coating. (1) - 1 thru 9 designating
     color or finish. Note: Not tested by NSF for efficacy at limiting the spread of bacteria.
[78] Powder Coat finish options are available with or without suffixes, or letters to replace
     zero in part number
     W       - White
     T or S  - Tuffcoat (Stardust Silver or EP6779024 Gray Powder Coat Finish)
     B or BK - Black
     B or BL - Blue
     BC      - Bonded Chrome
     G       - Gray
     Y       - Yellow

[2] With prefix 1 or 6 for selling division.

[2] With prefix 1 or 6 for selling division.
[14] (1) Digits 6 and 7 for foot type:
         OO - No foot
         45 - With adjustable foot 61645
         50 - With adjustable foot 61650
         51 - With adjustable foot 61651
         C2 - 2" Diameter caster wheel
         C3 - 3" Diameter caster wheel
         C4 - 4" Diameter caster wheel
         C5 - 5" Diameter caster wheel
         C6 - 6" Diameter caster wheel
         FF - Flanged foot
         FS - Flanged seismic foot
         F2 - 2 Hole flanged foot
         F3 - 3 Hole flanged foot
         HF - Hexagonal foot
         NG - Nylon glide
         NR - Nylon round glide
         PG - Plastic glide
         PS - Plastic glide special adjustment
         P3 - Plastic glide 3" adjustable
         RF - Round Weld Fill Foot   
     (2) Digits 8 and 9 are for length:
         8  - Whole inch increments; 3 numerical 2" through 9.
         Dimensions of 10" and longer are alphabetical: A - 10"; B - 11", etc.
         Letters "I" (India) and "O" (Oscar) are not used.
         9  - 1/10 inch increments in decimal form; or
         K  - Zinc plated mild steel
     (3) 10 - Mounting Type
         Studs: O - None, F - Flush, L - Special, T - Through
         Plates: M - 1783, N - 1780, P - 1785, R - 1780-24, S - Special
         Other: W - Weld top
[29] Powder Coat finish options are available with or without suffixes:
     W - White
     T - Tuffcoat (Stardust Silver Powder Coat Finish)
     B - Black
[42] For use with NSF Listed adjustable feet.

[2] With prefix 1 or 6 for selling division.
[43] May include the following:
           (1) W - Alternate internal wiring.
           (2) LMP or B - Lamp included.
           (3) Alphanumeric characters for customer specific requirements.
[77] May include the following:
         (1) 12, 240v, 277 Alternate voltage.
         (2) Alphanumeric characters for lens color.
         (3) Alphanumeric characters for customer specific requirements.

[2] With prefix 1 or 6 for selling division.
[44] (1) Right justified zeros may be replaced with suffix 02 through 48 denoting magnet and 
         handle options.
         Left justified zeros may be replaced with:
         "P" or "P(1)" to designate PathoGuard antimicrobial coating.  (1) - 1 thru 9 
         designating color or finish. 
         Note: Not tested by NSF at limiting the spread of bacteria. 
         "H" suffix denotes recessed back strike option.
         "A" suffix denotes composite body option.
         "M" suffix denotes shielded magnet option. 
     (2) With or without suffix 11 through 15 denoting cylinder number replace zero in part 
         number.

[2] With prefix 1 or 6 for selling division.
[45] (1) With 00, CO, BO, BC, BK, or K0.
     (2) With or without 01, 02, 03, or 04.

[2] With prefix 1 or 6 for selling division.

[2] With prefix 1 or 6 for selling division.
[46] (1) 2-14 denotes left or right hand and finish.
     (2) Internal zeros may be replaced with "S" when Spring Kits 125500000* are included
     with the 'hinge, and "A" when the hinges with kits are supplied Assembled.
[78] Powder Coat finish options are available with or without suffixes, or letters to replace
     zero in part number
     W       - White
     T or S  - Tuffcoat (Stardust Silver or EP6779024 Gray Powder Coat Finish)
     B or BK - Black
     B or BL - Blue
     BC      - Bonded Chrome
     G       - Gray
     Y       - Yellow

[2] With prefix 1 or 6 for selling division.
[47] (1) With suffix 03-48, and internal zeros may be replaced with alpha numeric code for
     different hole spacings.
[78] Powder Coat finish options are available with or without suffixes, or letters to replace
     zero in part number
     W       - White
     T or S  - Tuffcoat (Stardust Silver or EP6779024 Gray Powder Coat Finish)
     B or BK - Black
     B or BL - Blue
     BC      - Bonded Chrome
     G       - Gray
     Y       - Yellow

[2] With prefix 1 or 6 for selling division.
[48] With suffix 06 through 72 for inches in length.  Optional alpha suffix after the length
     code to denote customer special packaging or hole spacing.
[78] Powder Coat finish options are available with or without suffixes, or letters to replace
     zero in part number
     W       - White
     T or S  - Tuffcoat (Stardust Silver or EP6779024 Gray Powder Coat Finish)
     B or BK - Black
     B or BL - Blue
     BC      - Bonded Chrome
     G       - Gray
     Y       - Yellow

[2] With prefix 1 or 6 for selling division.

[2] With prefix 1 or 6 for selling division.

[2] With prefix 1 or 6 for selling division.

[2] With prefix 1 or 6 for selling division.
[49] (1) With or without a 3 digit alpha numeric code to denote special packaging
     (2) 3XX denotes the new steel shaft construction and XX denotes options for
         internal part variations such as spring strength, internal washers and
         cartridge stop height.
[50] (1) With or without a 3 digit alpha code to denote special packaging.
     (2) 0XX denotes the original zinc shaft construction and XX denotes options for 
         internal part variations such as spring strength, internal washers and 
         cartridge stop height.
[87] (1) With or without a 3 digit alpha code to denote special packaging
     (2) Digit 10 denotes bracket offset, 6 for original bracket offset, 7 for extended
     bracket offset, .				
     8 & 9 are for future offset options
     (3) Digit 11 denotes accessories: 0 for none, 3 for pivot adapter, 4 for 90° stop kit, 5
     for 				
     extended stop kit, 6 for double pivot adapter, 7 for special pivot adapter, 8 for
     special stop kit

[2] With prefix 1 or 6 for selling division.
[51] With or without cylinder lock and inside releasing locking cam options. The left
     justified zeros in these model numbers may be replaced with P or P(1) to designate
     PathoGuard antimicrobial coating. (1) - 1 thru 9 designating color or finish. Note: Not
     tested by NSF for efficacy at limiting the spread of bacteria.
[78] Powder Coat finish options are available with or without suffixes, or letters to replace
     zero in part number
     W       - White
     T or S  - Tuffcoat (Stardust Silver or EP6779024 Gray Powder Coat Finish)
     B or BK - Black
     B or BL - Blue
     BC      - Bonded Chrome
     G       - Gray
     Y       - Yellow

[2] With prefix 1 or 6 for selling division.
[40] 2 to 4 digits may be added to end of catalog number denoting special wall thickness. The
     left justified zeros in these model numbers may be replaced with P or P(1) to designate
     PathoGuard antimicrobial coating. (1) - 1 thru 9 designating color or finish. Note: Not
     tested by NSF for efficacy at limiting the spread of bacteria.
[78] Powder Coat finish options are available with or without suffixes, or letters to replace
     zero in part number
     W       - White
     T or S  - Tuffcoat (Stardust Silver or EP6779024 Gray Powder Coat Finish)
     B or BK - Black
     B or BL - Blue
     BC      - Bonded Chrome
     G       - Gray
     Y       - Yellow

[2] With prefix 1 or 6 for selling division.
[52] P(1) suffix designates optional PathoGuard antimicrobial coating. (1) - 1 thru 9
     designating color or finish. Note: Not tested by NSF for efficacy at limiting the spread
     of bacteria.

[2] With prefix 1 or 6 for selling division.
[89] (1) 00 for standard, alpha character for trimmed flange, special roller, mounting or
     packaging.
     (2) 5 for Polished Chrome finish, 6 for Brushed Chrome, Powder Coat finishes use codes:
         W - White
         T or S - Tuffcoat (Stardust Silver or EP6779024 Gray Powder Coat Finish)
         B or BK - Black
         B or BL - Blue
         BC - Bonded Chrome
         G - Gray
         Y - Yellow
     (3) With suffix 1-5

[2] With prefix 1 or 6 for selling division.

[2] With prefix 1 or 6 for selling division.
[81] (2) “CL” – continuous length 
     (3) color temp –00 (no designation), CW, WW or 2 digit number for color temp
     (4) length – 2 digit (example 24 - 24 inch)
     (5) kit – optional packing requirement

[2] With prefix 1 or 6 for selling division.
[54] (1) Digit 6, with C for cylinder or 0 without or P for Non-cylinder Pathoguard 
         antimicrobial coating.  Note: Not tested by NSF for efficacy at limiting 
         the spread of bacteria.
     (2) Digit 7, P denotes cylinder model with Pathoguard antimicrobial coating or 
         0 without.  Note: Not tested by NSF for efficacy at limiting the spread of 
         bacteria.
     (3) Digit 8, code for powder coat paint or 0
     (4) Digit 9, code letter for offset of 0 for flush.
     (5) Digits 10 & 11, code for door thickness, finish and inside release type.
     (6) Digits 12 & 13, key number or blank for miscellaneous or non-cylinder
[78] Powder Coat finish options are available with or without suffixes, or letters to replace
     zero in part number
     W       - White
     T or S  - Tuffcoat (Stardust Silver or EP6779024 Gray Powder Coat Finish)
     B or BK - Black
     B or BL - Blue
     BC      - Bonded Chrome
     G       - Gray
     Y       - Yellow
[80] (1) Digit 7, P denotes cylinder model with Pathoguard antimicrobial coating or 0 
         without. Note: Not tested by NSF for efficacy at limiting the spread of bacteria.
     (2) Digit 8, code for powder coat paint or 0
     (3) Digit 9, code letter for offset of 0 for flush.
     (4) Digits 10 & 11, code for door thickness, finish and inside release type.

[2] With prefix 1 or 6 for selling division.
[55] With suffix 1-4 for panel thickness.

[2] With prefix 1 or 6 for selling division.
[56] (1) With suffix 002-080
     (2) to read
     When used with any model 1255, 1256 or 1253 hinge. Variations are for finish and
     internal part configuration.
     (3) With suffix 02-36
     
[78] Powder Coat finish options are available with or without suffixes, or letters to replace
     zero in part number
     W       - White
     T or S  - Tuffcoat (Stardust Silver or EP6779024 Gray Powder Coat Finish)
     B or BK - Black
     B or BL - Blue
     BC      - Bonded Chrome
     G       - Gray
     Y       - Yellow

[2] With prefix 1 or 6 for selling division.

[57] Strip curtains for use in walk-in refrigerators or freezers
[58] (1) Two digit code, 00-20 indicating vinyl material.
     (2) Series Code: SA, SC, LA or LC
     (3) Strip Thickness: 6 - 0.06, 8 - 0.08, 1 - 0.12, 2 - 0.16
     (4) Strip Width: 04, 06, 08, 12, 16
     (5) Door opening 'Width X Height' in inches shown as a 4 to 6 digit numerical value.
     (6) With or without a 3 digit alpha numeric code to denote special overlap or
         packaging.

[8] Powder Coat finish options are available with or without suffixes, or letters to replace
    zero in part number
    W - White
    T or S - Tuffcoat (Stardust Silver Power Coat Finish)
    B or BK - Black
    G - Gray
[59] (1) 1 or 9 prefix to designate the company division of sale.
     (2) 4 digit alphanumeric denoting flange style:
         0000 - Flange for flat water
         A000 - Flange for thrust bearing
         BB00 - Flange for ball bearing 
     (3) 2 digit numeric code differentiating offset, bearing type, and hand orientation, 
         including: chrome plated forged brass or die cast zinc, available in 2 styles 
         of flange, with 2 spread dimensions and 4 height variations, 11 offset variations, 
         flange vs strap combinations, right and left hand versions.

[60] (1) With prefix 1 or 6 for selling division.
     (2) 5 digit suffix for: Customer special overlay which is a decorative inset that 
         goes under the front clear cover, color variations and custom logos, 
         packaging variations, accessories(accessories being other NSF Listed Displays and 
         or products), and added temperature probe, different probe lengths.
     (3) 1 to 3 digit numerical suffix for voltage.

[61] (1) Thickness of the vinyl. The standard is 12 indicating 0.120" thick.
     (2) Opening width in inches ranging from 20 to 72.
     (3) Opening height in inches ranging from 78 to 96.
     (4) With or without a 2 digit alphanumeric code to denote optional kick panel, size, and
     placement.
     (5) With or without a 3 digit alphanumeric code to denote special packaging.

[2] With prefix 1 or 6 for selling division.

[62] (1) With 2 digit numeric code indicating the supply voltage rating.
     (2) With 2 digit numeric code suffix indicating nominal fixture length.
     (3) With Suffix C indicating for use with T8 lamp type only.
     (4) With Suffix B indicating fixtures shipped with lamps.
     (5) With Prefix 1 or 6 for selling division.
     (6) May have an L or an I Suffix to denote a Lexan cover.

[63] (1) With 1 digit code for indicting the number of lamps.
     (2) With 2 digit numeric code indicating the supply voltage rating.
     (3) With 2 digit numeric code suffix indicating nominal fixture length.
     (4) With Suffix "L" indicating fixtures shipped with a Lexan cover.
     (5) With Prefix 1 or 6 for selling division.
     (6) May have suffix B indidcating fixtures shipped with lamp(s).
[64] (1) One digit alpha-numeric code indicating product wattage, lumen output
         or color.
     (2) Three to five alpha-numeric code to indicate variations for internal
         components or special customer packaging.
     (3) With prefix 1 or 6 for selling division.
     (4) Alpha-numeric code to indicate inclusion of battery back-up.
     (5) With or without suffix "TB" for accounting purposes.
[85] (1) Prefix of 1 or 6 for selling division.
     (2) 2-digit code for nominal product length.
     (3) 2-digit code for nominal wattage.

[2] With prefix 1 or 6 for selling division.
[65] Also sold as 1803000001 (globe only) and 1803000003 (junction box only).
[66] Also sold as 1803UCS003 (less globe) and 1803UCS013 (less globe with wire leads).
[67] Also sold as 1804000001 (globe only) and 1804000003 (junction box only).
[68] Also sold as 1804UCS010 (fixture with wire leads).
[69] Zeros may following letters LG or LED may be replaced by suffixes:
     (1) W   - Internal wiring
     (2) LMP - Includes lamp
[70] Also sold as 1803000001 (globe only) and 1806LG0004 (3/4" NPT junction box only).
[71] Last 4 zeroes may be replaced with alphanumeric code to denote voltage changes, internal
     wire configurations and packaging.    
     (1) FM - Flat mount    
     (2) NM - Narrow mount - angled lens
     (3) LC - LED flat lens
     (4) LW - LED angled lens
     (5) DL - Damp location
[72] Also sold as 1804000001 (globe only) and 1806LG0004 (3/4" NPT junction box only).

[2] With prefix 1 or 6 for selling division.
[73] For use with walk in refrigerators and freezers only.
[74] (1) With suffix 4, 6, or 8 denoting voltage.
     (2) With or without suffix denoting wall thickness or
         special packaging. (02 to 100)
     (3) Internal zeros stand for wattage, may be replaced with codes for alternate wattage
     or optional motion sensor.
[84] Optional motion sensor for the 1826, sold separately.  Internal zeros may be replaced
     with a code indicating a junction box with the motion sensor.

[2] With prefix 1 or 6 for selling division.
[75] With or without one digit suffix 3 of 4 when packaged with internal 3-way or 4-way
     switch assembly.

[2] With prefix 1 or 6 for selling division.

[1] Company name, model number, and "NSF" appears on label on outside of box for all models
    except vaporproof fixtures, wells, and exhaust canopy lights which carry all markings on
    the product.