NSF Product and Service Listings

These NSF Official Listings are current as of Thursday, January 15, 2026 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/food/Listings.asp?Standard=018&Company=41950&


NSF/ANSI 18
Manual Food and Beverage Dispensing Equipment



 
SHURflo Pump Manufacturing Co. 
1040 Muirfield Drive
Hanover Park, IL 60133 
United States 
800-854-3218 
562-797-5200
Visit this company's website

Facility : # 2 Mexico


COMPONENTS:

Accumulator Tank[1] [2] [Pb]
  181-00(1)[3]
  181-10(1)[3]
  181-20(1)[4]
  181-30(1)[3]
  181-40(1)[4]
  182-00(1)
  182-10(1)
  182-20(1)
  182-30(1)
  182-40(1)
  84-522-(1)[5]
 
[1] Numbers immediately following denote switch pressure and packaging.
[2] (1) 1 digit suffix indicating packaging differences.
[3] Component has been evaluated for water contact only.
[4] Component has been evaluated for use with water, non-alcoholic and alcoholic beverages,
    and condiments.
[5] (1) 2 digit suffix denotes label type and mounting base plate type.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

Automatic Selector Valve [6]
  165-100[1]
  165-110[2]
 
[1] Numbers immediately following denote switch pressure and packaging.
[2] (1) 1 digit suffix indicating packaging differences.
[6] Component is approved for use with water, non-alcoholic, and alcoholic beverages up to
    15% alcohol.

Bag-In-Box Pump (Shurflo Beverage Pump)[7] [Pb]
  166-2(1)-(2)[8]
  166-5(1)-(2)[9]
 
[7] Component has been evaluated for use with acidic, non-acidic and alcoholic beverages, or
    condiments only.  Not acceptable for contact with dairy.
[8] (1) 2 digit numerical suffix indicating variations in port configuration, housings,
        pistons, springs and actuator configuration. 26, 57 and 96 are acceptable.
    (2) 2 digit numerical suffix indicating variations in housing color, valve assembly,
        labeling, shutoff assembly, pistons and accessory parts.
[9] (1) 2 digit numerical suffix indicating variations in port configuration, housings,
        pistons, springs and actuator configuration. 00, 26 and 57 are acceptable.
    (2) 2 digit numerical suffix indicating variations in housing color, valve assembly,
        labeling, shutoff assembly, pistons and accessory parts.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

Booster Pump [Pb]
  2088-5(2)(3)-(4)(6)(5)[3] [10]
  3900-(2)(3)(4)(6)[3] [10]
  3901-(2)(3)(4)(6)[3] [10]
  490(1)-(2)(3)(4)0[3] [10]
  490(1)-(2)(3)(4)1[3] [10]
  490(1)-(2)(3)(4)2[3] [10]
  590(1)-(2)(3)(4)0[3] [10]
  590(1)-(2)(3)(4)1[3] [10]
  590(1)-(2)(3)(4)2[3] [10]
  8005-(1)-(2)[3] [11]
  8005-752-200[13]
  8008-(1)-(2)[3] [11] [12]
  8010-(1)-(2)[3] [11]
  8025-(1)-(2)[3] [11]
  8050-(1)-(2)[3] [11]
  8075-(1)-(2)[3] [11]
  8095-(1)-(2)[3] [11]
  8095-762-200[13]
  8095-951-299-BW[13]
  8105-(1)-(2)[11] [14]
  8108-(1)-(2)[11] [12] [14]
  8110-(1)-(2)[11] [14]
  8125-(1)-(2)[11] [14]
  8150-(1)-(2)[11] [14]
  8175-(1)-(2)[11] [14]
  8195-(1)-(2)[11] [14]
 
[3] Component has been evaluated for water contact only.
[10] (1) Single numerical digit indicating end-use market.
     (2) Single numerical digit indicating motor type.
     (3) Single numerical digit indicating drive.
     (4) Single numerical digit indicating packaging.
     (5) Single numerical digit indicating pressure.
     (6) Single numerical digit indicating configuration.
[11] (1) and (2) are each 3-digit suffixes denoting alternate materials listed, motors,
         drives, cams, port configuration, and pressure switch settings.
[12] Double-headed option available.
[13] Certified for contact with aqueous non-acidic only.
[14] Certified for contact with oils/fats only up to 150°F.  The volume of the finished
     article must be at least 5 gallons.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

Brix Ratio Pump[15] [16] [Pb]
  5000-230-(1)
  5000-240-(1)
  5000-242-(1)
  5000-250-(1)
  5000-253-(1)
  5000-260-(1)
  5000-270-(1)
  5000-277-(1)
  5000-290-(1)
  5000-330-(1)
  5000-340-(1)
  5000-342-(1)
  5000-350-(1)
  5000-353-(1)
  5000-360-(1)
  5000-370-(1)
  5000-377-(1)
  5000-390-(1)
 
[15] (1) 2 digit numerical suffix indicating shut-off variation: -01 - No shut-off, -02 -
     With 
         automatic shut-off.
[16] Component is approved for non-acidic and acidic beverages, non-alcoholic and alcoholic
     beverages up to 15% alcohol. Not for use above 104°F with foods containing more than 15%
     alcohol.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

Three-Way Valve[17]
  184-000
 
[17] Component has not been evaluated for use with alcohol or dairy products.

Vacuum Regulator[18]
  186-000
  186-002
  94-054-00
  94-054-02
 
[18] Component has been evaluated for use with water, non-alcoholic, and alcoholic beverages.

Water Pump[19]
  50(A)(B)-(C)(D)0(E)-(F)(G)(H)(I)
 
[19] A - Flow Rate (0 through 9)
     B - Market Segment (0 through 9)
     C - Pump Control (0 through 9)
     D - Pump Control Pressure (0 through 9)
     0 - NSF 18 Approved Wetted Components *
     E - Port Size and Type (0 through 9)
     F - Motor Size and Voltage (A Through Z)
     G - Motor Lead Configuration (0 through 9)
     H - Motor Suppression (0 through 9)
     I - Packaging (Blank or 0 through 9)
     


Facility : # 3 Hanover Park, IL


POU 115V Waterboost System
  EV316026[Pb]
 
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

COMPONENTS:

Automatic Sold-Out Switch[3] [Pb]
  94-064-01
  94-068-01
  94-068-20
  94-068-22
  94-068-31
  94-068-33
  94-068-45
  94-068-50
  94-068-51
  94-068-NF
 
[3] Acceptable for contact with alcohol, aqueous acidic, aqueous non-acidic, dairy (oil in
    water emulsions only), and dry solids, up to 212°F.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

Condiment System[1] [8]
  802-(1)n
  805-(1)n
 
[1] (1) 4 digit suffix will appear which represents internal customer orders.  Has no
    bearing
        on parts, function, or design.
[8] Products will bear letters HP on permanent label.

Electric Pump System[2] [8]
  94-437-00
 
[2] Component has been evaluated for use with water, non-alcoholic, and alcoholic beverages.
[8] Products will bear letters HP on permanent label.

Pressure Regulator Assembly[4] [8]
  183-059-06
  183-069-06
  183-069-07
  183-1(1)-(2)[5] [Pb]
  183-165-01[Pb]
  183-165-02[Pb]
  183-165-SS[Pb]
  183-180-01[Pb]
  183-180-02[Pb]
  183-180-SS[Pb]
  183-2(1)-(2)[5]
 
[4] Component has been evaluated for water contact only.
[5] (1) 2 digit numerical suffix indicating outlet pressure.
    (2) 2 digit alphanumeric suffix indicating varations in packaging and/or fitting
        configuration.
[8] Products will bear letters HP on permanent label.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

Reverse Flow Inhibitor (RFI)[6] [8]
  84-010-00
  84-010-02
  84-010-04
 
[6] Component has not been evaluated for use with alcohol or dairy products.
[8] Products will bear letters HP on permanent label.

Strainer (for Water System Assembly)[7] [8]
  254-266
 
[7] Certified production beginning with date code 01/06.
[8] Products will bear letters HP on permanent label.


Facility : Roselle, IL


Medium Waterboost[Pb]
  804-023
  804-024
  804-029
  804-034
  804-066
  804-323
 
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

COMPONENTS:

Automatic Sold-Out Switch[4] [Pb]
  94-064-01
  94-068-01
  94-068-20
  94-068-22
  94-068-31
  94-068-33
  94-068-45
  94-068-50
  94-068-51
  94-068-NF
 
[4] Acceptable for contact with alcohol, aqueous acidic, aqueous non-acidic, dairy (oil in
    water emulsions only), and dry solids, up to 212°F.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

Water Pressure Reducing Valve[5] [9] [Pb]
  183-059-06
  183-069-06
  183-069-07
  183-1(1)-(2)[6] [Pb]
  183-165-01[Pb]
  183-165-02[Pb]
  183-165-SS[Pb]
  183-180-01[Pb]
  183-180-02[Pb]
  183-180-SS[Pb]
  183-2(1)-(2)[6]
 
[5] Component has been evaluated for water contact only.
[6] (1) 2 digit numerical suffix indicating outlet pressure.
    (2) 2 digit alphanumeric suffix indicating varations in packaging and/or fitting
        configuration.
[9] Products will bear letters HP on permanent label.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.


Facility : St. Paul, MN


COMPONENTS:

Air Vent
  SVA00R1


Facility : Fenili Belasi (BS), Italy


COMPONENTS:

Six Gallon Accumulator Tank[1] [Pb]
  14-047-20
 
[1] Acceptable for contact with non-acidic beverages only.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

Two Gallon Accumulator Tank[1] [Pb]
  14-053-20
  14-066-20
  3400-002
 
[1] Acceptable for contact with non-acidic beverages only.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.


Number of matching Manufacturers is 1
Number of matching Products is 126
Processing time was 1 seconds