NSF Product and Service Listings

[1] (1) 24, 30, 36, 48, 60, 72 or 84 for width in inches.
    (2) Available with the following suffixes:
          GS - Glow stone
          GS-H - Glow stone with high heat capacity burners
          H - High heat capacity burners
          R - Radiant type burner
          R-H - Radiant type burners with high heat capacity burners

[2] NSF Certified production beginning with date code 08/11/2008 (0808).

[3] Units with stainless steel fronts and optional steel or grey sides, top, back, legs, and
    casters.

[3] Units with stainless steel fronts and optional steel or grey sides, top, back, legs, and
    casters.

[3] Units with stainless steel fronts and optional steel or grey sides, top, back, legs, and
    casters.

[4] With or without number and/or letter suffix to indicate voltage (ex. 208V...to 480V or
    480, 2/4V, 2/3V).
[5] With or without suffix W to indicate wall mount option.
[6] With or without a combination of suffix's A-Z(AAA-ZZZ) to indicate customer.
[7] With or without suffix PT to indicate pass thru model.
[8] With or without combination of suffix's A-Z(AAA-ZZZ) to indicate control type.

[4] With or without number and/or letter suffix to indicate voltage (ex. 208V...to 480V or
    480, 2/4V, 2/3V).
[6] With or without a combination of suffix's A-Z(AAA-ZZZ) to indicate customer.
[8] With or without combination of suffix's A-Z(AAA-ZZZ) to indicate control type.
[9] With or without suffix M, MS to indicate Marine, Marine/Submarine.
[10] May include a letter or number to indicate a stacked set.

[4] With or without number and/or letter suffix to indicate voltage (ex. 208V...to 480V or
    480, 2/4V, 2/3V).
[9] With or without suffix M, MS to indicate Marine, Marine/Submarine.
[10] May include a letter or number to indicate a stacked set.

[15] These units with or without casters may have:
      (A) FM prefix to designate floor model.
      (B) CM prefix to designate counter model.
      (C) APM prefix to designate alternate profile counter model.
      (D) H-suffix to designate high input burner system.
      (E) S-suffix to designate safety pilot system.
      (F) RMB prefix to designate radiants.
      (G) SMB prefix to designate ceramic coals.
      (H) APL Prefix to designate alternate profile counter model (leg mount only).
[16] (1) Width of cook top (in inches).
     (2) L Suffix to designate FC model 4" shorter (leg mount only).

[5] With or without suffix W to indicate wall mount option.
[6] With or without a combination of suffix's A-Z(AAA-ZZZ) to indicate customer.
[8] With or without combination of suffix's A-Z(AAA-ZZZ) to indicate control type.
[17] With suffix NAT or LP to indicate natural gas or propane.

[18] (1) Width of cook top (in inches).
     (2) L Suffix to designate FC model 4" shorter (leg mount only).
[19] May or may not have the following suffixes, in any combination or multitude,
     added to the base model to indicate graphics and/or preset adjustments for
     specific customers: A through Z and 0 through 9. Suffixes may or may not be
     separated from the base model by a dash (-) or slash (/).
[20] May or may not have the following prefixes that define a customer order
     specification, in any combination or multitude, added to the base model
     to indicate graphics and/or preset adjustments for specific customers:
     A through Z and 0 through 9. Prefixes are separated from the base 
     model by a dash (-) or slash (/).
[21] May have suffixes:
       E  - Electric thermostat
       L  - Left side chute
       R  - Right side chute
      LR  - Left and right side chute
      ST  - Solid state thermostat

[4] With or without number and/or letter suffix to indicate voltage (ex. 208V...to 480V or
    480, 2/4V, 2/3V).
[6] With or without a combination of suffix's A-Z(AAA-ZZZ) to indicate customer.
[8] With or without combination of suffix's A-Z(AAA-ZZZ) to indicate control type.
[9] With or without suffix M, MS to indicate Marine, Marine/Submarine.
[17] With suffix NAT or LP to indicate natural gas or propane.
[22] (1) May include 'R' designation for models that include a double gutter (front and back).
[23] With or without letters A-Z after the 124,136, 148, 160, 172, 224, 236, 248, 260, or 272
     to indicate customer.
[24] With or without suffix H, HS, B, C, G, S, PB, SD, DI, or DIM to indicate hood, sliding
     hood, both gutters, chrome, grooved, stainless steel, pickle barrel, solid door, or drop
     in military.
[25] With or without first model letter or suffix A-Z to indicate special application or
     custom model (ex. R for range or C for custom, etc.).
[26] Final digits may be 12 or 18.
[27] To be used on griddles, from 1 to 6 sections.

[4] With or without number and/or letter suffix to indicate voltage (ex. 208V...to 480V or
    480, 2/4V, 2/3V).
[6] With or without a combination of suffix's A-Z(AAA-ZZZ) to indicate customer.
[8] With or without combination of suffix's A-Z(AAA-ZZZ) to indicate control type.
[9] With or without suffix M, MS to indicate Marine, Marine/Submarine.
[24] With or without suffix H, HS, B, C, G, S, PB, SD, DI, or DIM to indicate hood, sliding
     hood, both gutters, chrome, grooved, stainless steel, pickle barrel, solid door, or drop
     in military.
[28] With or without suffix A-Z(AAA-ZZZ) to indicate range top component configuration.

[29] With or without suffixes D, DM, E, R and/or T
     D - Unit has drain provided for water well
     DM - Unit drains connected to a standard manifold
     E - Bottom unit
     R - Pans with rounded corner
     T - Thermostat controlled in lieu of infinite switch
[30] With or without suffix LWC (Low water cut off).

[9] With or without suffix M, MS to indicate Marine, Marine/Submarine.

[32] With or without suffix SP (element pattern) or SSH (solid state controls).
[33] With or without prefix G (grooved) and/or P (plated).

[29] With or without suffixes D, DM, E, R and/or T
     D - Unit has drain provided for water well
     DM - Unit drains connected to a standard manifold
     E - Bottom unit
     R - Pans with rounded corner
     T - Thermostat controlled in lieu of infinite switch
[31] Acceptable for dry or wet operations.

[35] With or without suffix RW (roll warmer option).

[36] With or without suffix F, L, or FL (F - filter system, L - auto lift).
[37] With or without suffix S (solid state controls).
[38] Hood system evaluated for design, construction and material only.

[39] With or without suffix E to indicate Electronic time and temp, C to indicate
     Cantilever design with electronic time and temp display, or S or NS to 
     indicate type of plates.
[40] With or without suffix NT to indicate no timer, or E to indicate electronic
     time and temp, or B to indicate a Cantilever design with no timer, C to 
     indicate cantilever design with electronic time and temp display, or S or NS
     to indicate type of plates.

[32] With or without suffix SP (element pattern) or SSH (solid state controls).
[33] With or without prefix G (grooved) and/or P (plated).

[41] With or without suffix HD (heavy duty).
[42] For use with non-potentially hazardous foods.

[41] With or without suffix HD (heavy duty).
[43] For use with potentially hazardous foods.

[31] Acceptable for dry or wet operations.
[44] With or without suffix GM or T
     GM - Present thermostats and on/off switch
     T - Thermostat controlled in lieu of infinite switch
[45] With or without suffix D or DM
     D - Unit has drain provided for water well
     DM - Unit drains are connected to a standard manifold
[46] With or without suffix AF (auto fill options).
[47] With or without suffix TDN (Thermostat and drain with narrow pan orientation).
[48] With or without suffix N (narrow) for end-to-end well configuration.
[49] (1) Numerical Suffix indicating size in quarts, 4, 8 or 10
     (2) With or without suffix T to indicate Thermostat
     (3) With or without suffix D to indicate drain
     (4) With or without suffix U to indicate UL Listed
     (5) With or without suffix C to indicate power cord
     (6) With or without suffix I to indicate insulated
     (7) With or without suffix AF or A to indicate Auto Fill option
     (8) With or without suffix 120, 12, 230, or 23 to indicate voltage.
[50] With or without suffix UL (Underwriters Lab).
[51] With or without suffix E or ER
     ER - Bottom mount with round corners
[52] With or without suffix P (precision metals).

[44] With or without suffix GM or T
     GM - Present thermostats and on/off switch
     T - Thermostat controlled in lieu of infinite switch

[32] With or without suffix SP (element pattern) or SSH (solid state controls).
[33] With or without prefix G (grooved) and/or P (plated).
[53] With numbers indicating depth and width.

[1] may or may not contain prefix, 5G, 5I or 5H and/or suffix NAT and LP that indicate
    product family (griddle, hotplates) and propane or natural gas respectively.

[1] may or may not contain prefix, 5G, 5I or 5H and/or suffix NAT and LP that indicate
    product family (griddle, hotplates) and propane or natural gas respectively.

[1] may or may not contain prefix, 5G, 5I or 5H and/or suffix NAT and LP that indicate
    product family (griddle, hotplates) and propane or natural gas respectively.

[1] may or may not contain prefix, 5G, 5I or 5H and/or suffix NAT and LP that indicate
    product family (griddle, hotplates) and propane or natural gas respectively.

[1] may or may not contain prefix, 5G, 5I or 5H and/or suffix NAT and LP that indicate
    product family (griddle, hotplates) and propane or natural gas respectively.

[1] may or may not contain prefix, 5G, 5I or 5H and/or suffix NAT and LP that indicate
    product family (griddle, hotplates) and propane or natural gas respectively.

[1] may or may not contain prefix, 5G, 5I or 5H and/or suffix NAT and LP that indicate
    product family (griddle, hotplates) and propane or natural gas respectively.

[1] may or may not contain prefix, 5G, 5I or 5H and/or suffix NAT and LP that indicate
    product family (griddle, hotplates) and propane or natural gas respectively.