NSF Product and Service Listings

[1] (1) Number indicates number of induction cookers
    (2) Suffix indicates base style
    (3) Suffix indicates cooker location

[3] Prefix "M" designates customer equipment that conforms to NSF Standard 2.

[3] Prefix "M" designates customer equipment that conforms to NSF Standard 2.

[3] Prefix "M" designates customer equipment that conforms to NSF Standard 2.

[3] Prefix "M" designates customer equipment that conforms to NSF Standard 2.

[3] Prefix "M" designates customer equipment that conforms to NSF Standard 2.

[2] (1) A three to eight character designation to indicate the color of the unit, except
        00001 which indicates a stainless steel base.
    (2) Type of shield: A - Affordable, B - Buffet, C - Cafeteria single,
        D - Cafeteria double, E - Adjustable, F - Entree, N - None
    (3) Light heater options: F - Fluorescent, H - Hatco heater, I - Incandescent/infrared,
        W - Hatco heat with lights, N - None
    (4) Voltage: A - 120, B - 208, C - 240, D - 203 3ph, E - 240 3ph, F - 120/208,
        G - 120/240, N - None
    (5) Basic model number will be followed by -2, -46, or -464 for unit with lights.
    (6) Basic model number will be followed by -2, -60, or -604 for unit with lights.
    (7) Suffix -2 indicates change in voltage.

[4] Available with or without suffix that indicates differences in drain and thermostat.
[5] Available with or without suffix indicating voltage difference.
[6] Units are for Hot Food Holding only - not for Rethermalization.
[9] Models may have a "FF" suffix indicating low profile top flange.

[4] Available with or without suffix that indicates differences in drain and thermostat.
[5] Available with or without suffix indicating voltage difference.
[6] Units are for Hot Food Holding only - not for Rethermalization.
[7] Available with "HD" suffix to indicate well material is Type 316 Stainless Steel.
[9] Models may have a "FF" suffix indicating low profile top flange.

[9] Models may have a "FF" suffix indicating low profile top flange.

[8] (1) 01, 02, 03, 04, 05, or 06 indicates number of wells.
[9] Models may have a "FF" suffix indicating low profile top flange.

[1] Available with and without inset.
[5] Suffix -7 or -11 indicates size in quarts.

[2] Listed models begin with serial number 29500
[5] Suffix -7 or -11 indicates size in quarts.

[3] (1) Three digits specifying length and wattage.
    (2) Two digits specifying voltage, with lights, or without lights.
    (3) One or two digits specifying control type.

[4] Suffix indicates difference in voltage and electrical certification.

[6] Available with or without -10 suffix that indicates difference in voltage, drain, and
    thermostat.

[7] (1)  Two digit suffix indicates length in inches.
    (2)  Three digit suffix indicates voltage.
    (3)  Two letter suffix indicates color.
    (4)  Two letter suffix indicates control type.

[1] Units may have up to three digit suffix.

[2] Models may have -1 suffix indicating as supplied without a pan.
[3] Units are also accepted for rethermalization.

[1] Units may have up to three digit suffix.

[2] Models may have -1 suffix indicating as supplied without a pan.
[3] Units are also accepted for rethermalization.