NSF Product and Service Listings
These NSF Official Listings are current as of Thursday, January 15, 2026 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/food/Listings.asp?Standard=002&Company=4C710&
NSF/ANSI 2
Food Equipment
Food Equipment
| NINGBO JULI METAL PRODUCTS CO., LTD. | |
| No. 28 Dongwu Section | |
| Yinxian Avenue, Ningbo City | |
| Zhejiang 315113 | |
| China | |
| 86 574 8819 7750 | |
| Visit this company's website |
Facility : Ningbo, China
|
Bar Sink |
|
| XBAR(1)B(9)(10)-(6)-(7)(8)[1] | |
[1] (1) Number of sink compartments
(2) Interior dimension of sink bowl in inches from left to right
(3) Interior dimension of sink bowl in inches from front to back
(4) Depth of bowl
(5) Dimension of drainboard
(6) Drainboard configuration:
L - Left
R - Right
LR - Left and right
(7) Material type sink bowl
2 - 201S/S
3 - 304S/S
4 - 430S/S
(8) Material thickness sink bowl
20 - 20GA.
18 - 18GA.
16 - 16GA.
14 - 14GA.
(9) Overall dimension in inches from front to back
(10) Overall dimension in inches from left to right
Product may be sold with or without the drainboard.
Product may be sold with or without the "H" or "U" leg bracing.
|
|
|
Cabinet with Prep Table[2] |
|
| CB(1)(2)(3)(4)(5) | |
| X(6)C(2)(3)-(4)(5)(7)-(8)(9)(10)(13)(14)(15) | |
[2] (1) Number of shelves
(2) Cabinet width in inches from front to back
(3) Cabinet length in inches from left to right
(4) Material type top shelf
2 - 201S/S
3 - 304S/S
4 - 430S/S
(5) Material thickness top shelf
22 - 22GA.
20 - 20GA.
18 - 18GA.
16 - 16GA.
14 - 14GA.
(6) Type of cabinet:
D - With upper baffle plate
Blank - Standard cabinet
(7) Drawer type:
DA - Drawer type A
DB - Drawer type B
DC - Drawer type C (can use stainless steel or plastic)
Blank - Without drawer
Can sell separately
The drawer can with or without lock
(8) Top shelf type:
R - 1"-6" Rear edge up
B - Flat backsplash (3"-10" )
BA - Slope backsplash (3"-10" )
Blank -Without backsplash
(9) Caster type:
C- With caster
Blank - Without caster
(10) Type of cabinet:
Blank - Welded
KD - Knock-down
(11) Drawer width in inches from front to back
(12) Drawer length in inches from left to right
(13) Sales with or without door, can be sliding door or swing door
WD - Without door
Blank - With door
(14) Handle is made of stainless steel or plastic
S - stainless steel handle
P - Plastic handle
(15) The edge can be round or straight
R - Round edge
Blank - Straight edge
(16) The tiers of separately drawers can vary from 1 to 10
Blank - 1 drawer
2 - 2 tiers of drawers
3 - 3 tiers of drawers
4 - 4 tiers of drawers
5 - 5 tiers of drawers
6 - 6 tiers of drawers
7 - 7 tiers of drawers
8 - 8 tiers of drawers
9 - 9 tiers of drawers
10 - 10 tiers of drawers
Sales with or without door lock.
|
|
|
Drop in Sink[3] |
|
| XDIS(1)C(2)(3)(4)-(5)-(6)(7) | |
[3] (1) Number of sink bowls
(2) Sink bowl dimension of length in inches from left to right
(3) Sink bowl dimension of width in inches from front to back
(4) Sink bowl Depth
(5) With or without splash
(6) Material type of sink
2 - 201S/S
3 - 304S/S
4 - 430S/S
(7) Material thickness sink
20 - 20GA.
18 - 18GA.
16 - 16GA.
|
|
|
Hand Sink |
|
| EHS-15 | |
| EHS-17 | |
|
Mop Sink[3] |
|
| XFMS(2)(3)(4)-(6)(7) | |
[3] (1) Number of sink bowls
(2) Sink bowl dimension of length in inches from left to right
(3) Sink bowl dimension of width in inches from front to back
(4) Sink bowl Depth
(5) With or without splash
(6) Material type of sink
2 - 201S/S
3 - 304S/S
4 - 430S/S
(7) Material thickness sink
20 - 20GA.
18 - 18GA.
16 - 16GA.
|
|
|
Overshelf[4] |
|
| X(1)OS(2)X(3)-(4)(5) | |
| XSSOS(3)(2)-(4)(5) | |
[4] (1) Number of shelves:
S - Single shelf
D - Double shelves
T - Triple shelves
(2) Shelf width in inches from front to back
(3) Shelf length in inches from left to right
(4) Material type top shelf
2 - 201S/S
3 - 304S/S
4 - 430S/S
(5)Material thickness top shelf
20 - 20GA.
18 - 18GA.
16 - 16GA.
|
|
|
Sink |
|
| X(1)BS-(2)(3)-(7)(8)[1] | |
| X(1)DT(2)(3)-(4)(5)[5] | |
| XS(1)-(2)-(3)-(4)[6] | |
| XS(1)C(2)(3)(4)-(5)(6)-(7)(8)[1] | |
[1] (1) Number of sink compartments
(2) Interior dimension of sink bowl in inches from left to right
(3) Interior dimension of sink bowl in inches from front to back
(4) Depth of bowl
(5) Dimension of drainboard
(6) Drainboard configuration:
L - Left
R - Right
LR - Left and right
(7) Material type sink bowl
2 - 201S/S
3 - 304S/S
4 - 430S/S
(8) Material thickness sink bowl
20 - 20GA.
18 - 18GA.
16 - 16GA.
14 - 14GA.
(9) Overall dimension in inches from front to back
(10) Overall dimension in inches from left to right
Product may be sold with or without the drainboard.
Product may be sold with or without the "H" or "U" leg bracing.
[5] (1) Table top type:
S - Soiled dish table with bowl
UC - Under counter dish table with bowl
(2) Top shelf length in inches from left to right
(3) Drain board configuration:
L - Left
R – Right
(4) Material type top shelf
3 - 304S/S
4 - 430S/S
(5) Material thickness top shelf
20 - 20GA.
18 - 18GA.
16 - 16GA.
[6] (1) Bowl size:
A - 18" x 18" tub
B - 24" x 24" tub
c - 18" x 21" tub
D - 18" x 24" tub
(2) Number of bowls.
(3) Depth of bowls in inches.
(4) Drainboard location and size:
D1 - Both sides, 18" long
D2 - Both sides, 24" long
L1 - Left side, 18" long
L2 - Left side, 24" long
N - No drainboard
R1 - Right side, 18" long
R2 - Right side, 24" long
|
|
|
Stainless Steel Dispenser[7] |
|
| DC(1)(2)(3) | |
[7] (1) 2 digits indicate length
(2) 2 digits indicate width
(3) 2 digits indicate height
|
|
|
Wall Shelf[8] |
|
| XMS (1)(2) | |
| XPS (1)(2) | |
| XWMS (1)(2)-(3)(4) | |
| XWMS-1224 | |
| XWMS-1236 | |
| XWMS-1248 | |
| XWMS-1260 | |
| XWMS-1272 | |
| XWMS-1284 | |
| XWMS-1296 | |
| XWMS-1424 | |
| XWMS-1436 | |
| XWMS-1448 | |
| XWMS-1460 | |
| XWMS-1472 | |
| XWMS-1484 | |
| XWMS-1496 | |
[8] (1) Width in inches
(2) Length in inches
(3) Material type top shelf
2 - 201S/S
3 - 304S/S
4 - 430S/S
(4) Material thickness top shelf
20 - 20GA.
18 - 18GA.
16 - 16GA.
|
|
|
Worktable [9] |
|
| XCDT(2)(3)-(4)(5)[5] | |
| XEFT(1)-(2)(3)-(4)-(5)(6)[10] | |
| XES(1)-(2)(3)-(14)-(5)(6)[10] | |
| XFWT(1)-(2)(3)-(5)(6)[10] | |
| XWT(1)(4)-(2)(3)(12)-(5)(6)(7)(8)[10] | |
| XWT(1)-(2)(3)-(4)-(5)(6)(7)(8)[10] | |
| XWT-(1)(2)(3)(4)[6] | |
[5] (1) Table top type:
S - Soiled dish table with bowl
UC - Under counter dish table with bowl
(2) Top shelf length in inches from left to right
(3) Drain board configuration:
L - Left
R – Right
(4) Material type top shelf
3 - 304S/S
4 - 430S/S
(5) Material thickness top shelf
20 - 20GA.
18 - 18GA.
16 - 16GA.
[6] (1) Bowl size:
A - 18" x 18" tub
B - 24" x 24" tub
c - 18" x 21" tub
D - 18" x 24" tub
(2) Number of bowls.
(3) Depth of bowls in inches.
(4) Drainboard location and size:
D1 - Both sides, 18" long
D2 - Both sides, 24" long
L1 - Left side, 18" long
L2 - Left side, 24" long
N - No drainboard
R1 - Right side, 18" long
R2 - Right side, 24" long
[9] (1) Table width in inches.
(2) Table length in inches.
(3) Material type:
S - 304 stainless steel with galvanized legs
E - 430 stainless steel with galvanized legs
SS - 304 stainless steel with stainless steel legs
(4) With or without suffix "B" indicating optional backsplash.
[10] (1) Metal type under shelf:
O - Open base
S - Stainless with round socket
G - Galvanized with round socket
SA - Stainless with aluminum die cast
GA - Galvanized with aluminum die cast
(2) Width in inches
(3) Length in inches
(4) Top shelf type:
1R - 1" Rear edge up
1.5R - 1.5" Rear edge up
2R - 2" Rear edge up
4BS - 4" Backsplash
5BS - 5" Backsplash
6BS - 6" Backsplash
7BS - 7" Backsplash
Blank-Without backsplash
(5) Material type top shelf
2 - 201S/S
3 - 304S/S
4 - 430S/S
(6) Material thickness top shelf
20 - 20GA.
18 - 18GA.
16 - 16GA.
14 - 14GA.
(7) Leg tube adjustment mode
ADJ - Adjustable height leg
Blank - Without adjustable leg
(8) With or without caster
C - With caster
Blank - Without caster
Worktable's top shelf sales include Bull-nose style, rounded style and square style.
(9) Caster style
S - Screw caster
PE - Plastic expanding caster
F - Flat caster
(10) Wheel size
3 - 3"
4 - 4"
5 - 5"
(11) The brake design
SB - Side brake
TB - Top brake
Blank - Without brake
Wheels come in a variety of colors
(12) The top material
PE - HIGH PERFORMANCE POLYETHYLENE
Blank - Without top plate
Top material can sale separately
(13) Size of the top material-PE
Digits represent the size of the top plate-length, width and height
(14) Top shelf type:
1R - 1" Rear edge up
1.5R - 1.5" Rear edge up
2R - 2" Rear edge up
2LBR - 2" Turn up at left, back and right edge
4BS - 4" Backsplash
5BS - 5" Backsplash
6BS - 6" Backsplash
7BS - 7" Backsplash
Blank-Without backsplash
|
|
|
COMPONENTS: |
|
|
Caster[10] |
|
| X(9)C-(10)(11) | |
[10] (1) Metal type under shelf:
O - Open base
S - Stainless with round socket
G - Galvanized with round socket
SA - Stainless with aluminum die cast
GA - Galvanized with aluminum die cast
(2) Width in inches
(3) Length in inches
(4) Top shelf type:
1R - 1" Rear edge up
1.5R - 1.5" Rear edge up
2R - 2" Rear edge up
4BS - 4" Backsplash
5BS - 5" Backsplash
6BS - 6" Backsplash
7BS - 7" Backsplash
Blank-Without backsplash
(5) Material type top shelf
2 - 201S/S
3 - 304S/S
4 - 430S/S
(6) Material thickness top shelf
20 - 20GA.
18 - 18GA.
16 - 16GA.
14 - 14GA.
(7) Leg tube adjustment mode
ADJ - Adjustable height leg
Blank - Without adjustable leg
(8) With or without caster
C - With caster
Blank - Without caster
Worktable's top shelf sales include Bull-nose style, rounded style and square style.
(9) Caster style
S - Screw caster
PE - Plastic expanding caster
F - Flat caster
(10) Wheel size
3 - 3"
4 - 4"
5 - 5"
(11) The brake design
SB - Side brake
TB - Top brake
Blank - Without brake
Wheels come in a variety of colors
(12) The top material
PE - HIGH PERFORMANCE POLYETHYLENE
Blank - Without top plate
Top material can sale separately
(13) Size of the top material-PE
Digits represent the size of the top plate-length, width and height
(14) Top shelf type:
1R - 1" Rear edge up
1.5R - 1.5" Rear edge up
2R - 2" Rear edge up
2LBR - 2" Turn up at left, back and right edge
4BS - 4" Backsplash
5BS - 5" Backsplash
6BS - 6" Backsplash
7BS - 7" Backsplash
Blank-Without backsplash
|
|
|
Drawer for Cabinet[2] |
|
| X(16)D-(11)(12)-(4)(5)(7) | |
[2] (1) Number of shelves
(2) Cabinet width in inches from front to back
(3) Cabinet length in inches from left to right
(4) Material type top shelf
2 - 201S/S
3 - 304S/S
4 - 430S/S
(5) Material thickness top shelf
22 - 22GA.
20 - 20GA.
18 - 18GA.
16 - 16GA.
14 - 14GA.
(6) Type of cabinet:
D - With upper baffle plate
Blank - Standard cabinet
(7) Drawer type:
DA - Drawer type A
DB - Drawer type B
DC - Drawer type C (can use stainless steel or plastic)
Blank - Without drawer
Can sell separately
The drawer can with or without lock
(8) Top shelf type:
R - 1"-6" Rear edge up
B - Flat backsplash (3"-10" )
BA - Slope backsplash (3"-10" )
Blank -Without backsplash
(9) Caster type:
C- With caster
Blank - Without caster
(10) Type of cabinet:
Blank - Welded
KD - Knock-down
(11) Drawer width in inches from front to back
(12) Drawer length in inches from left to right
(13) Sales with or without door, can be sliding door or swing door
WD - Without door
Blank - With door
(14) Handle is made of stainless steel or plastic
S - stainless steel handle
P - Plastic handle
(15) The edge can be round or straight
R - Round edge
Blank - Straight edge
(16) The tiers of separately drawers can vary from 1 to 10
Blank - 1 drawer
2 - 2 tiers of drawers
3 - 3 tiers of drawers
4 - 4 tiers of drawers
5 - 5 tiers of drawers
6 - 6 tiers of drawers
7 - 7 tiers of drawers
8 - 8 tiers of drawers
9 - 9 tiers of drawers
10 - 10 tiers of drawers
Sales with or without door lock.
|
|
|
Plate[10] |
|
| (12)plate-(13) | |
[10] (1) Metal type under shelf:
O - Open base
S - Stainless with round socket
G - Galvanized with round socket
SA - Stainless with aluminum die cast
GA - Galvanized with aluminum die cast
(2) Width in inches
(3) Length in inches
(4) Top shelf type:
1R - 1" Rear edge up
1.5R - 1.5" Rear edge up
2R - 2" Rear edge up
4BS - 4" Backsplash
5BS - 5" Backsplash
6BS - 6" Backsplash
7BS - 7" Backsplash
Blank-Without backsplash
(5) Material type top shelf
2 - 201S/S
3 - 304S/S
4 - 430S/S
(6) Material thickness top shelf
20 - 20GA.
18 - 18GA.
16 - 16GA.
14 - 14GA.
(7) Leg tube adjustment mode
ADJ - Adjustable height leg
Blank - Without adjustable leg
(8) With or without caster
C - With caster
Blank - Without caster
Worktable's top shelf sales include Bull-nose style, rounded style and square style.
(9) Caster style
S - Screw caster
PE - Plastic expanding caster
F - Flat caster
(10) Wheel size
3 - 3"
4 - 4"
5 - 5"
(11) The brake design
SB - Side brake
TB - Top brake
Blank - Without brake
Wheels come in a variety of colors
(12) The top material
PE - HIGH PERFORMANCE POLYETHYLENE
Blank - Without top plate
Top material can sale separately
(13) Size of the top material-PE
Digits represent the size of the top plate-length, width and height
(14) Top shelf type:
1R - 1" Rear edge up
1.5R - 1.5" Rear edge up
2R - 2" Rear edge up
2LBR - 2" Turn up at left, back and right edge
4BS - 4" Backsplash
5BS - 5" Backsplash
6BS - 6" Backsplash
7BS - 7" Backsplash
Blank-Without backsplash
|
|
|
Speed Rail |
|
| X(1)-(2)(3)(4)-(5)(6)[11] | |
[11] 10](1) Number of speed rail bowls
(2) Interior dimension of speed rail bowl in inches from front to back
(3) Interior dimension of speed rail bowl in inches from left to right
(4) The combination of speed rail bowls
A - left and right connection
B - Up and down connection
(5) Material type speed rail bowl
2 - 201S/S
3 - 304S/S
4 - 430S/S
(6) Material thickness speed rail bowl in Gauge
Sales with or without speed rail hanger.
|
|
|
Speed Rail Hanger |
|
| XSPH-(1)(2)(3)(4)[12] | |
[12] (1) Width in inches
(2)Length in inches
(3) Material type speed rail bowl
2 - 201S/S
3 - 304S/S
4 - 430S/S
(4) Material thickness speed rail bowl in Gauge
|
|
|
Undershelf[10] |
|
| XWT-(2)(3)US-(1)-(5)(6) | |
[10] (1) Metal type under shelf:
O - Open base
S - Stainless with round socket
G - Galvanized with round socket
SA - Stainless with aluminum die cast
GA - Galvanized with aluminum die cast
(2) Width in inches
(3) Length in inches
(4) Top shelf type:
1R - 1" Rear edge up
1.5R - 1.5" Rear edge up
2R - 2" Rear edge up
4BS - 4" Backsplash
5BS - 5" Backsplash
6BS - 6" Backsplash
7BS - 7" Backsplash
Blank-Without backsplash
(5) Material type top shelf
2 - 201S/S
3 - 304S/S
4 - 430S/S
(6) Material thickness top shelf
20 - 20GA.
18 - 18GA.
16 - 16GA.
14 - 14GA.
(7) Leg tube adjustment mode
ADJ - Adjustable height leg
Blank - Without adjustable leg
(8) With or without caster
C - With caster
Blank - Without caster
Worktable's top shelf sales include Bull-nose style, rounded style and square style.
(9) Caster style
S - Screw caster
PE - Plastic expanding caster
F - Flat caster
(10) Wheel size
3 - 3"
4 - 4"
5 - 5"
(11) The brake design
SB - Side brake
TB - Top brake
Blank - Without brake
Wheels come in a variety of colors
(12) The top material
PE - HIGH PERFORMANCE POLYETHYLENE
Blank - Without top plate
Top material can sale separately
(13) Size of the top material-PE
Digits represent the size of the top plate-length, width and height
(14) Top shelf type:
1R - 1" Rear edge up
1.5R - 1.5" Rear edge up
2R - 2" Rear edge up
2LBR - 2" Turn up at left, back and right edge
4BS - 4" Backsplash
5BS - 5" Backsplash
6BS - 6" Backsplash
7BS - 7" Backsplash
Blank-Without backsplash
|
|
Number of matching Manufacturers is 1
Number of matching Products is 44
Processing time was 0 seconds
