NSF Product and Service Listings
These NSF Official Listings are current as of Thursday, January 15, 2026 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/food/Listings.asp?Standard=002&Company=59780&
NSF/ANSI 2
Food Equipment
Food Equipment
| Durable USA, Inc. | |
| 2801 East Abram | |
| Arlington, TX 76010 | |
| United States | |
| 800-848-4517 | |
| 972-602-9601 |
Facility : Arlington, TX
|
COMPONENTS: |
|
|
Caster Bumper |
|
| CB200 | |
|
Caster Series 4S[1] |
|
| 4S(1)40(2)(3)(4)(5)(6) | |
| 4S(1)50(2)(3)(4)(5)(6) | |
| 4S(1)60(2)(3)(4)(5)(6) | |
| 4S(1)80(2)(3)(4)(5)(6) | |
[1] (1) Wheel type suffixes:
AC - Hi-temp polyolefin
BC - Dura-Cushion
EL - Thermoplastic elastomer on polypropylene, rounded
EN - Rubber on plastic core
GN - High temp nylon glass filled
HI - Glass filled polypropylene
HP - Polyolefin, heavy-duty
HR - Hard rubber with or without ball bearing
HT - High temp phenolic
HU - Solid polyurethane, heavy-duty
MA - Glass filled nylon
MU - Polyurethane on glass filled nylon
MV - Glass filled nylon "V" groove
NM - Thermoplastic elastomer on polypropylene
NY - Nylon
OV - Glass filled epoxy
PA - Polyurethane on aluminum
PH - Phenolic
PM - Polyurethane on polypropylene
PO - Polyolefin
PP - Polyurethane/polypropylene
RA - Rubber/aluminum
RK - Hard rubber with nylon insert
SP - Solid rubber over Nylon
SU - Solid polyurethane
SR - Soft rubber with or without ball bearing
TP - Rubber/polypropylen
UA - Polyurethane on aluminum, crowned
UX - Polyurethane on Aluminum core
(2) Suffix indicating tread width
(3) Suffix indicating wheel color/s
(4) Suffix indicating wheel bearing type
(5) Suffix indicating fastener type
(6) May include any combination of the following optional suffixes:
A - A-Cam
B - Lower raceway cap
C - WB-Cam
E - Zerk and raceway seal
G - Thread-guards
H - Tech lock
I - No zerk or seal on raceway
J - Axle and nut instead of rivet
K - High temp grease
L - Raceway seal
M - Chrome plating
N - Nickle plating
P - 4PSL
R - Therm screw
S - Side brake
T - Top lock brake
V - Top lock brake
X - Black oxide finish
Y/YY - Dummy fill numbers
Z - Zerk axle and nut
ZZ - Dummy fill numbers
|
|
|
Caster Series B1/B2[1] |
|
| B1(1)40(2)(3)(4)(5)(6) | |
| B1(1)50(2)(3)(4)(5)(6) | |
| B1(1)60(2)(3)(4)(5)(6) | |
| B1(1)80(2)(3)(4)(5)(6) | |
| B2(1)40(2)(3)(4)(5)(6) | |
| B2(1)50(2)(3)(4)(5)(6) | |
| B2(1)60(2)(3)(4)(5)(6) | |
| B2(1)80(2)(3)(4)(5)(6) | |
[1] (1) Wheel type suffixes:
AC - Hi-temp polyolefin
BC - Dura-Cushion
EL - Thermoplastic elastomer on polypropylene, rounded
EN - Rubber on plastic core
GN - High temp nylon glass filled
HI - Glass filled polypropylene
HP - Polyolefin, heavy-duty
HR - Hard rubber with or without ball bearing
HT - High temp phenolic
HU - Solid polyurethane, heavy-duty
MA - Glass filled nylon
MU - Polyurethane on glass filled nylon
MV - Glass filled nylon "V" groove
NM - Thermoplastic elastomer on polypropylene
NY - Nylon
OV - Glass filled epoxy
PA - Polyurethane on aluminum
PH - Phenolic
PM - Polyurethane on polypropylene
PO - Polyolefin
PP - Polyurethane/polypropylene
RA - Rubber/aluminum
RK - Hard rubber with nylon insert
SP - Solid rubber over Nylon
SU - Solid polyurethane
SR - Soft rubber with or without ball bearing
TP - Rubber/polypropylen
UA - Polyurethane on aluminum, crowned
UX - Polyurethane on Aluminum core
(2) Suffix indicating tread width
(3) Suffix indicating wheel color/s
(4) Suffix indicating wheel bearing type
(5) Suffix indicating fastener type
(6) May include any combination of the following optional suffixes:
A - A-Cam
B - Lower raceway cap
C - WB-Cam
E - Zerk and raceway seal
G - Thread-guards
H - Tech lock
I - No zerk or seal on raceway
J - Axle and nut instead of rivet
K - High temp grease
L - Raceway seal
M - Chrome plating
N - Nickle plating
P - 4PSL
R - Therm screw
S - Side brake
T - Top lock brake
V - Top lock brake
X - Black oxide finish
Y/YY - Dummy fill numbers
Z - Zerk axle and nut
ZZ - Dummy fill numbers
|
|
|
Caster Series BK[1] |
|
| BK(1)25(2)(3)(4)(5)(6) | |
| BK(1)30(2)(3)(4)(5)(6) | |
| BK(1)40(2)(3)(4)(5)(6) | |
| BK(1)50(2)(3)(4)(5)(6) | |
[1] (1) Wheel type suffixes:
AC - Hi-temp polyolefin
BC - Dura-Cushion
EL - Thermoplastic elastomer on polypropylene, rounded
EN - Rubber on plastic core
GN - High temp nylon glass filled
HI - Glass filled polypropylene
HP - Polyolefin, heavy-duty
HR - Hard rubber with or without ball bearing
HT - High temp phenolic
HU - Solid polyurethane, heavy-duty
MA - Glass filled nylon
MU - Polyurethane on glass filled nylon
MV - Glass filled nylon "V" groove
NM - Thermoplastic elastomer on polypropylene
NY - Nylon
OV - Glass filled epoxy
PA - Polyurethane on aluminum
PH - Phenolic
PM - Polyurethane on polypropylene
PO - Polyolefin
PP - Polyurethane/polypropylene
RA - Rubber/aluminum
RK - Hard rubber with nylon insert
SP - Solid rubber over Nylon
SU - Solid polyurethane
SR - Soft rubber with or without ball bearing
TP - Rubber/polypropylen
UA - Polyurethane on aluminum, crowned
UX - Polyurethane on Aluminum core
(2) Suffix indicating tread width
(3) Suffix indicating wheel color/s
(4) Suffix indicating wheel bearing type
(5) Suffix indicating fastener type
(6) May include any combination of the following optional suffixes:
A - A-Cam
B - Lower raceway cap
C - WB-Cam
E - Zerk and raceway seal
G - Thread-guards
H - Tech lock
I - No zerk or seal on raceway
J - Axle and nut instead of rivet
K - High temp grease
L - Raceway seal
M - Chrome plating
N - Nickle plating
P - 4PSL
R - Therm screw
S - Side brake
T - Top lock brake
V - Top lock brake
X - Black oxide finish
Y/YY - Dummy fill numbers
Z - Zerk axle and nut
ZZ - Dummy fill numbers
|
|
|
Caster Series CW/CL[1] |
|
| CR(1)25(2)(3)(4)(5)(6) | |
| CR(1)30(2)(3)(4)(5)(6) | |
| CR(1)40(2)(3)(4)(5)(6) | |
| CR(1)50(2)(3)(4)(5)(6) | |
| CW(1)25(2)(3)(4)(5)(6) | |
| CW(1)30(2)(3)(4)(5)(6) | |
| CW(1)40(2)(3)(4)(5)(6) | |
| CW(1)50(2)(3)(4)(5)(6) | |
[1] (1) Wheel type suffixes:
AC - Hi-temp polyolefin
BC - Dura-Cushion
EL - Thermoplastic elastomer on polypropylene, rounded
EN - Rubber on plastic core
GN - High temp nylon glass filled
HI - Glass filled polypropylene
HP - Polyolefin, heavy-duty
HR - Hard rubber with or without ball bearing
HT - High temp phenolic
HU - Solid polyurethane, heavy-duty
MA - Glass filled nylon
MU - Polyurethane on glass filled nylon
MV - Glass filled nylon "V" groove
NM - Thermoplastic elastomer on polypropylene
NY - Nylon
OV - Glass filled epoxy
PA - Polyurethane on aluminum
PH - Phenolic
PM - Polyurethane on polypropylene
PO - Polyolefin
PP - Polyurethane/polypropylene
RA - Rubber/aluminum
RK - Hard rubber with nylon insert
SP - Solid rubber over Nylon
SU - Solid polyurethane
SR - Soft rubber with or without ball bearing
TP - Rubber/polypropylen
UA - Polyurethane on aluminum, crowned
UX - Polyurethane on Aluminum core
(2) Suffix indicating tread width
(3) Suffix indicating wheel color/s
(4) Suffix indicating wheel bearing type
(5) Suffix indicating fastener type
(6) May include any combination of the following optional suffixes:
A - A-Cam
B - Lower raceway cap
C - WB-Cam
E - Zerk and raceway seal
G - Thread-guards
H - Tech lock
I - No zerk or seal on raceway
J - Axle and nut instead of rivet
K - High temp grease
L - Raceway seal
M - Chrome plating
N - Nickle plating
P - 4PSL
R - Therm screw
S - Side brake
T - Top lock brake
V - Top lock brake
X - Black oxide finish
Y/YY - Dummy fill numbers
Z - Zerk axle and nut
ZZ - Dummy fill numbers
|
|
|
Caster Series H9/H0[1] |
|
| H0(1)40(2)(3)(4)(5)(6) | |
| H0(1)50(2)(3)(4)(5)(6) | |
| H0(1)60(2)(3)(4)(5)(6) | |
| H0(1)80(2)(3)(4)(5)(6) | |
| H9(1)40(2)(3)(4)(5)(6) | |
| H9(1)50(2)(3)(4)(5)(6) | |
| H9(1)60(2)(3)(4)(5)(6) | |
| H9(1)80(2)(3)(4)(5)(6) | |
[1] (1) Wheel type suffixes:
AC - Hi-temp polyolefin
BC - Dura-Cushion
EL - Thermoplastic elastomer on polypropylene, rounded
EN - Rubber on plastic core
GN - High temp nylon glass filled
HI - Glass filled polypropylene
HP - Polyolefin, heavy-duty
HR - Hard rubber with or without ball bearing
HT - High temp phenolic
HU - Solid polyurethane, heavy-duty
MA - Glass filled nylon
MU - Polyurethane on glass filled nylon
MV - Glass filled nylon "V" groove
NM - Thermoplastic elastomer on polypropylene
NY - Nylon
OV - Glass filled epoxy
PA - Polyurethane on aluminum
PH - Phenolic
PM - Polyurethane on polypropylene
PO - Polyolefin
PP - Polyurethane/polypropylene
RA - Rubber/aluminum
RK - Hard rubber with nylon insert
SP - Solid rubber over Nylon
SU - Solid polyurethane
SR - Soft rubber with or without ball bearing
TP - Rubber/polypropylen
UA - Polyurethane on aluminum, crowned
UX - Polyurethane on Aluminum core
(2) Suffix indicating tread width
(3) Suffix indicating wheel color/s
(4) Suffix indicating wheel bearing type
(5) Suffix indicating fastener type
(6) May include any combination of the following optional suffixes:
A - A-Cam
B - Lower raceway cap
C - WB-Cam
E - Zerk and raceway seal
G - Thread-guards
H - Tech lock
I - No zerk or seal on raceway
J - Axle and nut instead of rivet
K - High temp grease
L - Raceway seal
M - Chrome plating
N - Nickle plating
P - 4PSL
R - Therm screw
S - Side brake
T - Top lock brake
V - Top lock brake
X - Black oxide finish
Y/YY - Dummy fill numbers
Z - Zerk axle and nut
ZZ - Dummy fill numbers
|
|
|
Caster Series RX/RR[1] |
|
| RL(1)40(2)(3)(4)(5)(6) | |
| RL(1)50(2)(3)(4)(5)(6) | |
| RL(1)60(2)(3)(4)(5)(6) | |
| RL(1)80(2)(3)(4)(5)(6) | |
| RR(1)25(2)(3)(4)(5)(6) | |
| RR(1)30(2)(3)(4)(5)(6) | |
| RR(1)40(2)(3)(4)(5)(6) | |
| RR(1)40(2)(3)(4)(5)(6) | |
| RR(1)50(2)(3)(4)(5)(6) | |
| RR(1)50(2)(3)(4)(5)(6) | |
| RR(1)60(2)(3)(4)(5)(6) | |
| RR(1)80(2)(3)(4)(5)(6) | |
| RX(1)25(2)(3)(4)(5)(6) | |
| RX(1)30(2)(3)(4)(5)(6) | |
| RX(1)40(2)(3)(4)(5)(6) | |
| RX(1)40(2)(3)(4)(5)(6) | |
| RX(1)50(2)(3)(4)(5)(6) | |
| RX(1)50(2)(3)(4)(5)(6) | |
| RX(1)60(2)(3)(4)(5)(6) | |
| RX(1)80(2)(3)(4)(5)(6) | |
[1] (1) Wheel type suffixes:
AC - Hi-temp polyolefin
BC - Dura-Cushion
EL - Thermoplastic elastomer on polypropylene, rounded
EN - Rubber on plastic core
GN - High temp nylon glass filled
HI - Glass filled polypropylene
HP - Polyolefin, heavy-duty
HR - Hard rubber with or without ball bearing
HT - High temp phenolic
HU - Solid polyurethane, heavy-duty
MA - Glass filled nylon
MU - Polyurethane on glass filled nylon
MV - Glass filled nylon "V" groove
NM - Thermoplastic elastomer on polypropylene
NY - Nylon
OV - Glass filled epoxy
PA - Polyurethane on aluminum
PH - Phenolic
PM - Polyurethane on polypropylene
PO - Polyolefin
PP - Polyurethane/polypropylene
RA - Rubber/aluminum
RK - Hard rubber with nylon insert
SP - Solid rubber over Nylon
SU - Solid polyurethane
SR - Soft rubber with or without ball bearing
TP - Rubber/polypropylen
UA - Polyurethane on aluminum, crowned
UX - Polyurethane on Aluminum core
(2) Suffix indicating tread width
(3) Suffix indicating wheel color/s
(4) Suffix indicating wheel bearing type
(5) Suffix indicating fastener type
(6) May include any combination of the following optional suffixes:
A - A-Cam
B - Lower raceway cap
C - WB-Cam
E - Zerk and raceway seal
G - Thread-guards
H - Tech lock
I - No zerk or seal on raceway
J - Axle and nut instead of rivet
K - High temp grease
L - Raceway seal
M - Chrome plating
N - Nickle plating
P - 4PSL
R - Therm screw
S - Side brake
T - Top lock brake
V - Top lock brake
X - Black oxide finish
Y/YY - Dummy fill numbers
Z - Zerk axle and nut
ZZ - Dummy fill numbers
|
|
|
Casters[1] |
|
| 03(1)20(2)(3)(4)(5)(6) | |
| 03(1)25(2)(3)(4)(5)(6) | |
| 03(1)30(2)(3)(4)(5)(6) | |
| 04(1)20(2)(3)(4)(5)(6) | |
| 04(1)25(2)(3)(4)(5)(6) | |
| 04(1)30(2)(3)(4)(5)(6) | |
| 05(1)30(2)(3)(4)(5)(6) | |
| 06(1)30(2)(3)(4)(5)(6) | |
| 07(1)30(2)(3)(4)(5)(6) | |
| 07(1)35(2)(3)(4)(5)(6) | |
| 07(1)40(2)(3)(4)(5)(6) | |
| 07(1)50(2)(3)(4)(5)(6) | |
| 08(1)16(2)(3)(4)(5)(6) | |
| 08(1)20(2)(3)(4)(5)(6) | |
| 08(1)25(2)(3)(4)(5)(6) | |
| 08(1)30(2)(3)(4)(5)(6) | |
| 09(1)25(2)(3)(4)(5)(6) | |
| 09(1)30(2)(3)(4)(5)(6) | |
| 09(1)40(2)(3)(4)(5)(6) | |
| 09(1)50(2)(3)(4)(5)(6) | |
| 10(1)25(2)(3)(4)(5)(6) | |
| 10(1)30(2)(3)(4)(5)(6) | |
| 10(1)40(2)(3)(4)(5)(6) | |
| 10(1)50(2)(3)(4)(5)(6) | |
| 11(1)20(2)(3)(4)(5)(6) | |
| 11(1)25(2)(3)(4)(5)(6) | |
| 11(1)30(2)(3)(4)(5)(6) | |
| 11(1)40(2)(3)(4)(5)(6) | |
| 12(1)20(2)(3)(4)(5)(6) | |
| 12(1)25(2)(3)(4)(5)(6) | |
| 12(1)30(2)(3)(4)(5)(6) | |
| 12(1)40(2)(3)(4)(5)(6) | |
| 13(1)25(2)(3)(4)(5)(6) | |
| 13(1)30(2)(3)(4)(5)(6) | |
| 13(1)35(2)(3)(4)(5)(6) | |
| 13(1)40(2)(3)(4)(5)(6) | |
| 13(1)50(2)(3)(4)(5)(6) | |
| 13(1)60(2)(3)(4)(5)(6) | |
| 14(1)25(2)(3)(4)(5)(6) | |
| 14(1)30(2)(3)(4)(5)(6) | |
| 14(1)35(2)(3)(4)(5)(6) | |
| 14(1)40(2)(3)(4)(5)(6) | |
| 14(1)50(2)(3)(4)(5)(6) | |
| 14(1)60(2)(3)(4)(5)(6) | |
| 15(1)25(2)(3)(4)(5)(6) | |
| 15(1)30(2)(3)(4)(5)(6) | |
| 15(1)35(2)(3)(4)(5)(6) | |
| 15(1)40(2)(3)(4)(5)(6) | |
| 15(1)50(2)(3)(4)(5)(6) | |
| 15(1)60(2)(3)(4)(5)(6) | |
| 16(1)25(2)(3)(4)(5)(6) | |
| 16(1)30(2)(3)(4)(5)(6) | |
| 16(1)35(2)(3)(4)(5)(6) | |
| 16(1)40(2)(3)(4)(5)(6) | |
| 16(1)50(2)(3)(4)(5)(6) | |
| 16(1)60(2)(3)(4)(5)(6) | |
| 17(1)30(2)(3)(4)(5)(6) | |
| 17(1)35(2)(3)(4)(5)(6) | |
| 17(1)40(2)(3)(4)(5)(6) | |
| 17(1)50(2)(3)(4)(5)(6) | |
| 17(1)60(2)(3)(4)(5)(6) | |
| 18(1)30(2)(3)(4)(5)(6) | |
| 18(1)35(2)(3)(4)(5)(6) | |
| 18(1)40(2)(3)(4)(5)(6) | |
| 18(1)50(2)(3)(4)(5)(6) | |
| 18(1)60(2)(3)(4)(5)(6) | |
| 19(1)30(2)(3)(4)(5)(6) | |
| 19(1)35(2)(3)(4)(5)(6) | |
| 19(1)40(2)(3)(4)(5)(6) | |
| 19(1)50(2)(3)(4)(5)(6) | |
| 19(1)60(2)(3)(4)(5)(6) | |
| 21(1)30(2)(3)(4)(5)(6) | |
| 21(1)35(2)(3)(4)(5)(6) | |
| 21(1)40(2)(3)(4)(5)(6) | |
| 21(1)50(2)(3)(4)(5)(6) | |
| 21(1)60(2)(3)(4)(5)(6) | |
| 22(1)30(2)(3)(4)(5)(6) | |
| 22(1)35(2)(3)(4)(5)(6) | |
| 22(1)40(2)(3)(4)(5)(6) | |
| 22(1)50(2)(3)(4)(5)(6) | |
| 22(1)60(2)(3)(4)(5)(6) | |
| 23(1)25(2)(3)(4)(5)(6) | |
| 23(1)30(2)(3)(4)(5)(6) | |
| 23(1)35(2)(3)(4)(5)(6) | |
| 23(1)40(2)(3)(4)(5)(6) | |
| 23(1)50(2)(3)(4)(5)(6) | |
| 23(1)60(2)(3)(4)(5)(6) | |
| 24(1)25(2)(3)(4)(5)(6) | |
| 24(1)30(2)(3)(4)(5)(6) | |
| 24(1)35(2)(3)(4)(5)(6) | |
| 24(1)40(2)(3)(4)(5)(6) | |
| 24(1)50(2)(3)(4)(5)(6) | |
| 24(1)60(2)(3)(4)(5)(6) | |
| 25(1)40(2)(3)(4)(5)(6) | |
| 25(1)50(2)(3)(4)(5)(6) | |
| 25(1)60(2)(3)(4)(5)(6) | |
| 25(1)80(2)(3)(4)(5)(6) | |
| 27(1)10(2)(3)(4)(5)(6) | |
| 27(1)30(2)(3)(4)(5)(6) | |
| 27(1)34(2)(3)(4)(5)(6) | |
| 27(1)40(2)(3)(4)(5)(6) | |
| 27(1)50(2)(3)(4)(5)(6) | |
| 27(1)60(2)(3)(4)(5)(6) | |
| 27(1)61(2)(3)(4)(5)(6) | |
| 27(1)80(2)(3)(4)(5)(6) | |
| 27(1)81(2)(3)(4)(5)(6) | |
| 28(1)10(2)(3)(4)(5)(6) | |
| 28(1)30(2)(3)(4)(5)(6) | |
| 28(1)34(2)(3)(4)(5)(6) | |
| 28(1)40(2)(3)(4)(5)(6) | |
| 28(1)50(2)(3)(4)(5)(6) | |
| 28(1)60(2)(3)(4)(5)(6) | |
| 28(1)80(2)(3)(4)(5)(6) | |
| 31(1)30(2)(3)(4)(5)(6) | |
| 31(1)34(2)(3)(4)(5)(6) | |
| 31(1)40(2)(3)(4)(5)(6) | |
| 31(1)50(2)(3)(4)(5)(6) | |
| 31(1)60(2)(3)(4)(5)(6) | |
| 31(1)80(2)(3)(4)(5)(6) | |
| 32(1)30(2)(3)(4)(5)(6) | |
| 32(1)34(2)(3)(4)(5)(6) | |
| 32(1)40(2)(3)(4)(5)(6) | |
| 32(1)50(2)(3)(4)(5)(6) | |
| 32(1)60(2)(3)(4)(5)(6) | |
| 32(1)80(2)(3)(4)(5)(6) | |
| 33(1)40(2)(3)(4)(5)(6) | |
| 33(1)50(2)(3)(4)(5)(6) | |
| 33(1)60(2)(3)(4)(5)(6) | |
| 33(1)80(2)(3)(4)(5)(6) | |
| 35(1)40(2)(3)(4)(5)(6) | |
| 35(1)50(2)(3)(4)(5)(6) | |
| 35(1)60(2)(3)(4)(5)(6) | |
| 35(1)80(2)(3)(4)(5)(6) | |
| 36(1)40(2)(3)(4)(5)(6) | |
| 36(1)50(2)(3)(4)(5)(6) | |
| 36(1)60(2)(3)(4)(5)(6) | |
| 36(1)80(2)(3)(4)(5)(6) | |
| 73(1)25(2)(3)(4)(5)(6) | |
| 73(1)30(2)(3)(4)(5)(6) | |
| 73(1)35(2)(3)(4)(5)(6) | |
| 73(1)40(2)(3)(4)(5)(6) | |
| 73(1)50(2)(3)(4)(5)(6) | |
| 73(1)60(2)(3)(4)(5)(6) | |
| 74(1)25(2)(3)(4)(5)(6) | |
| 74(1)30(2)(3)(4)(5)(6) | |
| 74(1)35(2)(3)(4)(5)(6) | |
| 74(1)40(2)(3)(4)(5)(6) | |
| 74(1)50(2)(3)(4)(5)(6) | |
| 74(1)60(2)(3)(4)(5)(6) | |
| 75(1)25(2)(3)(4)(5)(6) | |
| 75(1)30(2)(3)(4)(5)(6) | |
| 75(1)35(2)(3)(4)(5)(6) | |
| 75(1)40(2)(3)(4)(5)(6) | |
| 75(1)50(2)(3)(4)(5)(6) | |
| 75(1)60(2)(3)(4)(5)(6) | |
| 76(1)25(2)(3)(4)(5)(6) | |
| 76(1)30(2)(3)(4)(5)(6) | |
| 76(1)35(2)(3)(4)(5)(6) | |
| 76(1)40(2)(3)(4)(5)(6) | |
| 76(1)50(2)(3)(4)(5)(6) | |
| 76(1)60(2)(3)(4)(5)(6) | |
| 79(1)25(2)(3)(4)(5)(6) | |
| 79(1)30(2)(3)(4)(5)(6) | |
| 79(1)35(2)(3)(4)(5)(6) | |
| 79(1)40(2)(3)(4)(5)(6) | |
| 79(1)50(2)(3)(4)(5)(6) | |
| 79(1)60(2)(3)(4)(5)(6) | |
| 79(1)80(2)(3)(4)(5)(6) | |
| 80(1)25(2)(3)(4)(5)(6) | |
| 80(1)30(2)(3)(4)(5)(6) | |
| 80(1)35(2)(3)(4)(5)(6) | |
| 80(1)40(2)(3)(4)(5)(6) | |
| 80(1)50(2)(3)(4)(5)(6) | |
| 80(1)60(2)(3)(4)(5)(6) | |
| 80(1)80(2)(3)(4)(5)(6) | |
| 85(1)25(2)(3)(4)(5)(6) | |
| 85(1)30(2)(3)(4)(5)(6) | |
| 85(1)35(2)(3)(4)(5)(6) | |
| 85(1)40(2)(3)(4)(5)(6) | |
| 85(1)50(2)(3)(4)(5)(6) | |
| 85(1)60(2)(3)(4)(5)(6) | |
| 86(1)25(2)(3)(4)(5)(6) | |
| 86(1)30(2)(3)(4)(5)(6) | |
| 86(1)35(2)(3)(4)(5)(6) | |
| 86(1)40(2)(3)(4)(5)(6) | |
| 86(1)50(2)(3)(4)(5)(6) | |
| 86(1)60(2)(3)(4)(5)(6) | |
| 95(1)25(2)(3)(4)(5)(6) | |
| 95(1)30(2)(3)(4)(5)(6) | |
| 95(1)35(2)(3)(4)(5)(6) | |
| 95(1)40(2)(3)(4)(5)(6) | |
| 95(1)50(2)(3)(4)(5)(6) | |
| 95(1)60(2)(3)(4)(5)(6) | |
| 96(1)25(2)(3)(4)(5)(6) | |
| 96(1)30(2)(3)(4)(5)(6) | |
| 96(1)35(2)(3)(4)(5)(6) | |
| 96(1)40(2)(3)(4)(5)(6) | |
| 96(1)50(2)(3)(4)(5)(6) | |
| 96(1)60(2)(3)(4)(5)(6) | |
| LVLM(1)20-366(2)(3)(4)[2] | |
| LVLMD(1)30-400(2)(3)(4)[2] | |
| M3(1)30(2)(3)(4)(5)(6) | |
| M3(1)40(2)(3)(4)(5)(6) | |
| M3(1)50(2)(3)(4)(5)(6) | |
| M4(1)30(2)(3)(4)(5)(6) | |
| M4(1)40(2)(3)(4)(5)(6) | |
| M4(1)50(2)(3)(4)(5)(6) | |
| NS(1)(2)G(3)(4)(5)YY[3] | |
| NT(1)(2)G(3)(4)(5)YY[3] | |
| RH(1)30(2)(3)(4)(5)(6) | |
| RH(1)35(2)(3)(4)(5)(6) | |
| RH(1)40(2)(3)(4)(5)(6) | |
| RH(1)50(2)(3)(4)(5)(6) | |
| S5(1)40(2)(3)(4)(5)(6) | |
| S5(1)50(2)(3)(4)(5)(6) | |
| S5(1)60(2)(3)(4)(5)(6) | |
| S5(1)80(2)(3)(4)(5)(6) | |
| S6(1)40(2)(3)(4)(5)(6) | |
| S6(1)50(2)(3)(4)(5)(6) | |
| S6(1)60(2)(3)(4)(5)(6) | |
| S6(1)80(2)(3)(4)(5)(6) | |
| S7(1)30(2)(3)(4)(5)(6) | |
| S7(1)35(2)(3)(4)(5)(6) | |
| S7(1)40(2)(3)(4)(5)(6) | |
| S7(1)50(2)(3)(4)(5)(6) | |
| S8(1)30(2)(3)(4)(5)(6) | |
| S8(1)35(2)(3)(4)(5)(6) | |
| S8(1)40(2)(3)(4)(5)(6) | |
| S8(1)50(2)(3)(4)(5)(6) | |
| S9(1)30(2)(3)(4)(5)(6) | |
| S9(1)35(2)(3)(4)(5)(6) | |
| S9(1)40(2)(3)(4)(5)(6) | |
| S9(1)50(2)(3)(4)(5)(6) | |
| SH(1)30(2)(3)(4)(5)(6) | |
| SH(1)35(2)(3)(4)(5)(6) | |
| SH(1)40(2)(3)(4)(5)(6) | |
| SH(1)50(2)(3)(4)(5)(6) | |
| SS(1)(2)G(3)(4)(5)YY[3] | |
| ST(1)(2)G(3)(4)(5)YY[3] | |
| T3(1)30(2)(3)(4)(5)(6) | |
| T3(1)35(2)(3)(4)(5)(6) | |
| T3(1)40(2)(3)(4)(5)(6) | |
| T3(1)50(2)(3)(4)(5)(6) | |
| T3(1)60(2)(3)(4)(5)(6) | |
| TH(1)30(2)(3)(4)(5)(6) | |
| TH(1)35(2)(3)(4)(5)(6) | |
| TH(1)40(2)(3)(4)(5)(6) | |
| TH(1)50(2)(3)(4)(5)(6) | |
[1] (1) Wheel type suffixes:
AC - Hi-temp polyolefin
BC - Dura-Cushion
EL - Thermoplastic elastomer on polypropylene, rounded
EN - Rubber on plastic core
GN - High temp nylon glass filled
HI - Glass filled polypropylene
HP - Polyolefin, heavy-duty
HR - Hard rubber with or without ball bearing
HT - High temp phenolic
HU - Solid polyurethane, heavy-duty
MA - Glass filled nylon
MU - Polyurethane on glass filled nylon
MV - Glass filled nylon "V" groove
NM - Thermoplastic elastomer on polypropylene
NY - Nylon
OV - Glass filled epoxy
PA - Polyurethane on aluminum
PH - Phenolic
PM - Polyurethane on polypropylene
PO - Polyolefin
PP - Polyurethane/polypropylene
RA - Rubber/aluminum
RK - Hard rubber with nylon insert
SP - Solid rubber over Nylon
SU - Solid polyurethane
SR - Soft rubber with or without ball bearing
TP - Rubber/polypropylen
UA - Polyurethane on aluminum, crowned
UX - Polyurethane on Aluminum core
(2) Suffix indicating tread width
(3) Suffix indicating wheel color/s
(4) Suffix indicating wheel bearing type
(5) Suffix indicating fastener type
(6) May include any combination of the following optional suffixes:
A - A-Cam
B - Lower raceway cap
C - WB-Cam
E - Zerk and raceway seal
G - Thread-guards
H - Tech lock
I - No zerk or seal on raceway
J - Axle and nut instead of rivet
K - High temp grease
L - Raceway seal
M - Chrome plating
N - Nickle plating
P - 4PSL
R - Therm screw
S - Side brake
T - Top lock brake
V - Top lock brake
X - Black oxide finish
Y/YY - Dummy fill numbers
Z - Zerk axle and nut
ZZ - Dummy fill numbers
[2] (1) Wheel Type PP - Polyurethane/polypropylene
(2) Color code, W is red tread/white core
(3) Bearing Type: #42 ball bearing
(4) Top Plate size
[3] (1) Wheel Type: PP Polyurethane, TP Thermoplatic
(2) Wheel Diameter
(3) Color of Caster body
(4) Bearings Type
(5) top plate size
|
|
|
Tread Brake |
|
| PTB | |
Number of matching Manufacturers is 1
Number of matching Products is 302
Processing time was 0 seconds
