NSF Product and Service Listings

These NSF Official Listings are current as of Thursday, January 15, 2026 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/food/Listings.asp?Standard=002&Company=70490&

NSF/ANSI 2
Food Equipment


 
Hatch Industries Limited 
211 Dawson Road
Guelph, ON N1H 1A3 
Canada 
800-387-6969 
519-822-1420

Facility : Guelph, Ontario, Canada


Angle Racks - Mobile, Riveted, Welded, Universal Aluminum [1] [2]
  AR(1)(2)-(3)-(4)-(5)-(6)-(7)*
  
[1] Any NSF/ANSI listed product found with this footnote ([1]) will have the applicable
    options specified for the corresponding model in other footnotes noted in listing. These
    options will appear on the model and/or on the literature accompanying the model.
[2] (1) R - Riveted slides
        W - Welded slides
    (2) Blank
        D  - Double compartment
        DH - Double half size compartment
        S  - Single compartment
        SH - Single half size compartment
        U  - Universal slides
    (3) Four digit number representing tray or pan size.
    (4) Number representing tray or pan total capacity.
    (5) Number representing spacing in inches.
    (6) Blank
        BIN - Bin
        EB  - Enclosed base
        KD  - Knock down
        LP  - Low profile
    (7) Blank
        CD  - Corner bumpers
        CSR - Center stability horizontal rod, front and rear
        DB  - Donut bumpers
        HD  - Heavy duty
        VR  - Vertical rod pan stop at rear
        WAB - Wrap-around bumper
        WS  - Top mounted work surface
    *   - NSF Certified model.

Angle Racks - Mobile, Fixed Angle Slide, Stainless Steel, Open All Around[1] [3]
  4-(1)-(2)-BIN-(3)-(4)-(5)*
  
[1] Any NSF/ANSI listed product found with this footnote ([1]) will have the applicable
    options specified for the corresponding model in other footnotes noted in listing. These
    options will appear on the model and/or on the literature accompanying the model.
[3] (1) 00 - Single compartment, 1 bin/tote per slide
        40 - Double compartment, 1 bin/tote per slide
    (2) Four digit number representing bin or tote size.
    (3) Number representing bin/tote total capacity.
    (4) Number representing spacing in inches.
    (5) Blank
        CB  - Corner bumpers
        CSR - Center stability horizontal rod, front and rear
        LP  - Low profile
        VR  - Vertical tray stops at rear
    *   - NSF Certified model.

Angle Racks - Mobile, Fixed Angle Slide, Stainless Steel, Wrap Around Bumper[1] [4]
  3(1)-(2)-(3)-(4)-(5)*
  
[1] Any NSF/ANSI listed product found with this footnote ([1]) will have the applicable
    options specified for the corresponding model in other footnotes noted in listing. These
    options will appear on the model and/or on the literature accompanying the model.
[4] (1) 00 - Single compartment, 1 tray per slide
    20 - Single compartment, 2 trays per slide
    40 - Double compartment, 1 tray per slide
    60 - Double compartment, 2 trays per slide
    (2) Four digit number representing tray size.
    (3) Number representing total tray capacity.
    (4) Number representing spacing in inches.
    (5) Blank
        CB  - Corner bumpers
        CSR - Center stability horizontal rod, front and rear
        FT  - Flat top
        LP  - Low profile
        ST  - Sanitary edge top
        VR  - Vertical rod pan stopper at rear
    *   - NSF Certified model.

Angle Racks - Mobile, Fixed Angle Slide, stainless steel, Open All Around[1] [5]
  4(1)-(2)-(3)-(4)-(5)*
  
[1] Any NSF/ANSI listed product found with this footnote ([1]) will have the applicable
    options specified for the corresponding model in other footnotes noted in listing. These
    options will appear on the model and/or on the literature accompanying the model.
[5] (1) 00 - Single compartment, 1 pan per slide
        40 - Double compartment, 1 pan per slide
    (2) Four digit number representing pan size.
    (3) Number representing total pan capacity.
    (4) Number representing spacing in inches.
    (5) Blank
        CB  - Corner bumpers
        CSR - Center stability horizontal rod, front and rear
        LP  - Low profile
        VR  - Vertical tray stops at rear
    *   - NSF Certified model.

Angle Racks - Mobile, Fixed Angle Slides, Stainless Steel, 1826 Bun Pans [1] [6]
  2(1)-1826-(2)-(3)-(4)
  
[1] Any NSF/ANSI listed product found with this footnote ([1]) will have the applicable
    options specified for the corresponding model in other footnotes noted in listing. These
    options will appear on the model and/or on the literature accompanying the model.
[6] (1) 00 - Single compartment, 1 pan per slide
        40 - Double compartment, 1 pan per slide
    (2) Number representing total pan capacity.
    (3) Number representing spacing in inches.
    (4) Blank
        CB  - Corner bumpers
        CSR - Center stability horizontal rod, front and rear
        FT  - Flat top
        LP  - Low profile
        ST  - Sanitary edge top
        VR  - Vertical rod pan stopper at rear
    *   - NSF Certified model.

Angle Racks - Mobile, Fixed Angle Slides, Stainless Steel, Open All Around[1] [7]
  4(1)-(2)-(3)-(4)-(5)*
  
[1] Any NSF/ANSI listed product found with this footnote ([1]) will have the applicable
    options specified for the corresponding model in other footnotes noted in listing. These
    options will appear on the model and/or on the literature accompanying the model.
[7] (1) 00 - Single compartment, 1 tray per slide
        20 - Single compartment, 2 trays per slide
        40 - Double compartment, 1 tray per slide
        60 - Double compartment, 2 trays per slide
        80 - Triple compartment, 1 tray per slide
        90 - Triple compartment, 2 trays per slide
    (2) Four digit number representing tray size.
    (3) Number indicating tray or pan total capacity.
    (4) Number indication spacing in inches.
    (5) Blank
        CB  - Corner bumpers
        CSR - Center stability horizontal rod, front and rear
        LP  - Low profile
        VR  - Vertical tray stop(s) at rear
        WAB - Wrap-around bumper
    *   - NSF Certified model.

Angle Racks - Mobile, Removable Tray Slide Assemblies, Stainless Steel[1] [8]
  5-(1)-(2)-(3)-(4)-(5) *
  
[1] Any NSF/ANSI listed product found with this footnote ([1]) will have the applicable
    options specified for the corresponding model in other footnotes noted in listing. These
    options will appear on the model and/or on the literature accompanying the model.
[8] (1) 00 - Single compartment, 1 tray per slide
        20 - Single compartment, 2 trays per slide
        40 - Double compartment, 1 tray per slide
        60 - Double compartment, 2 trays per slide
        80 - Triple compartment, 1 tray per slide
        90 - Triple compartment, 2 trays per slide
    (2) Four digit number representing tray size.
    (3) Number representing total tray capacity.
    (4) Number representing spacing in inches.
    (5) Blank
        CB  - Corner bumpers
        LP  - Low profile
        VR  - Vertical tray stop(s) at rear
        WAB - Flush mount wrap-aroung bumper
    * - NSF Certified model.

Angle Racks - Mobile, Welded, Fixed Slide, Stainless Steel [1] [9]
  HATP(1)-1826-(2)-(3)-(4)*
  
[1] Any NSF/ANSI listed product found with this footnote ([1]) will have the applicable
    options specified for the corresponding model in other footnotes noted in listing. These
    options will appear on the model and/or on the literature accompanying the model.
[9] (1) S - Single compartment, 1 pan per slide
        D - Double compartment, 1 pan per slide
    (2) Number representing total pan capacity.
    (3) Number representing spacing in inches.
    (4) Blank
        CB  - Corner bumpers
        CSR - Center stability horizontal rod, front and rear
        FT  - Flat top
        LP  - Low profile
        SFC - Square frame construction
        ST  - Sanitary edge top
        PH1 - 1 push handle
        PH2 - 2 push handles
        VR  - Vertical rod pan stopper at rear
        WAB - Wrap-around bumpers
    * - NSF Certified model.

Angle Racks - Mobile, Welded, Fixed and Universal Slides, Stainless Steel [1] [10]
  HAT(1)-(2)-(3)-(4)-(5)-(6)-(7)*
  
[1] Any NSF/ANSI listed product found with this footnote ([1]) will have the applicable
    options specified for the corresponding model in other footnotes noted in listing. These
    options will appear on the model and/or on the literature accompanying the model.
[10] (1) Blank - Single unit, 1 tray per slide
         2  - 2 trays per slide
         D  - Double compartment
         DH - Double half size unit
         D2 - Double compartment, 2 trays per slide
         S  - Sloped, single unit
         SD - Sloped, double unit
         SH - Single half size unit
         T  - Triple compartment
         T2 - Triple compartment, 2 trays per slide
         UA - Universal, adjustable angle slides
         Z  - Single unit, compact storage nesting configuration
     (2) Tray or Pan size:
         1/4 - 1/4 tray or pan size
         1/3 - 1/3 tray or pan size
         1/2 - 1/2 tray or pan size
         1/1 - 1/1 tray or pan size or fractionals included.
     (3) Number representing tray or pan total capacity
     (4) Number representing spacing in inches
         Number representing number of shelves
     (5) NS - Narrow slides
         WS - Wide slides
     (6) Blank
         EB - Enclosed base
     (7) Blank
         90TS - 90 degree tray stops each end
         BIN  - Bin/tote capacity
         CB   - Corner bumpers
         CR24 - Curtis maximum door opening 24"
         CSR  - Center stability horizontal rod, front and rear
         DB   - Donut bumpers
         FP   - Fractional pan capacity
         LP   - Low profile
         ND   - No pocket doors
         P1   - One pocket door
         P2   - Two pocket doors
         P4   - Four pocket door (CM style)
         PH1  - Push handle, 1 side
         PH2 - Push handle, 2 sides
         ST  - Sanitary edge topFT  - Flat Top
         SVF - Square vertical frame
         VR  - Vertical rod tray stopper at rear
         WAB - Wrap-around bumper
     * - NSF Certified model.

Base and Cover Cart - Mobile, Stainless Steel, Varying Capacities[1] [11]
  BCR-SS-(1)-(2) *
  
[1] Any NSF/ANSI listed product found with this footnote ([1]) will have the applicable
    options specified for the corresponding model in other footnotes noted in listing. These
    options will appear on the model and/or on the literature accompanying the model.
[11] Options for Base and Cover Cart:
     (1) 050 - 50 Covers / 100 Bases
         080 - 80 Covers / 160 Bases
         120 - 120 Covers / 240 Bases
         160 - 160 Covers / 320 Bases
     (2) Blank
         CB - Corner bumpers
         DB - Donut bumpers
     * - NSF Certified model

Box Unit[1] [12]
  (1)(2) DT (3)-(4)-(5)-(6)*
  
[1] Any NSF/ANSI listed product found with this footnote ([1]) will have the applicable
    options specified for the corresponding model in other footnotes noted in listing. These
    options will appear on the model and/or on the literature accompanying the model.
[12] Options for Box Unit:
     (1) Indicating number of tubes
     (2) Blank
         A - Adjustable
         O - Open
         S - Square dispensers
         R - Rectangular dispensers
     (3) Blank
         H - Heated
     (4) M - Mobile
         S - Stationary
         C - On counter
     (5) Depth and width of box
     (6) Blank - No accessories
         TC - Tube covers
         CB - Corner bumpers
         NP - Nameplate
         PP - Push Posts
     * - NSF Certified model

Cook Chill Angle Racks [1] [13]
  CCR(1)-(2)-(3)-(4)-(5)*
  
[1] Any NSF/ANSI listed product found with this footnote ([1]) will have the applicable
    options specified for the corresponding model in other footnotes noted in listing. These
    options will appear on the model and/or on the literature accompanying the model.
[13] Options for Cook Chill Angle Racks:
     (1) 1 - 1 pan/tray per slide
         2 - 2 pans/trays per slide
     (2) Four digit number representing pan or tray size.
     (3) Number representing tray or pan total capacity.
     (4) P - Pans
         T - Tray
     (5) Blank
         CB  - Corner bumpers
         CSR - Center stability horizontal rod, front and rear
         DB  - Donut bumpers
         EB  - Enclosed base
         WAB - Wrap-around bumper
     * - NSF Certified model

Dish Cart - Open[1] [14]
  UDC(1)-(2)-(3)-(4) *
  
[1] Any NSF/ANSI listed product found with this footnote ([1]) will have the applicable
    options specified for the corresponding model in other footnotes noted in listing. These
    options will appear on the model and/or on the literature accompanying the model.
[14] Options for dish carts:  
     (1) Blank
         R - Raised working height/removable cover model
     (2) D - Double compartment
         S - Single compartment
     (3) Four digit number representing storage dimension
     (4) Blank
         AD-1 - 1 Wire dish divider
         AD-2 - 2 Wire dish divider
         AD-3 - 3 Wire dish divider
         AD-4 - 4 Wire dish divider
         CB  - Corner bumpers
         DB  - Donut bumpers
         PH1 - Push handle - one end
         PH2 - Push handle - each end
         VH  - Ergonomic style push handles one end
     * - NSF Certified model

Economy Cart - Mobile, Stainless, Single and Double Compartments[1] [15]
  ETC(1)(2)-(3)-(4)-(5)*
  
[1] Any NSF/ANSI listed product found with this footnote ([1]) will have the applicable
    options specified for the corresponding model in other footnotes noted in listing. These
    options will appear on the model and/or on the literature accompanying the model.
[15] Options for Economy Carts:
     (1) Blank
         2 - 2 Trays per slide
         D - Double
     (2) Blank
         2 - 2 Trays per slide
     (3) 4 digit number indicating tray size.
     (4) Number indicating tray capacity.
     (5) Number indicating tray spacing.
     * - NSF Certified model

Mobile Tray Delivery Trucks[1] [16]
  MDC(1)-(2)-(3)-(4)-(5)-(6) *
  MDC Series
  600 Series
  6(1)-(2)-(3)-(4)-(5)(6) *
  700 Series
  7(1)-(2)-(3)-(4)-(5)-(6) *
  800 Series
  8(1)-(2)-(3)-(4)-(5)-(6) *
  900 Series
  9(1)-(2)-(3)-(4)-(5)-(6) *
  
[1] Any NSF/ANSI listed product found with this footnote ([1]) will have the applicable
    options specified for the corresponding model in other footnotes noted in listing. These
    options will appear on the model and/or on the literature accompanying the model.
[16] Options for Mobile Tray Delivery Trucks:
     (1) 00 - Single compartment, 1 tray per slide
         20 - Single compartment, 2 trays per slide
         40 - Double compartment, 1 tray per slide
         60 - Double compartment, 2 trays per slide
         80 - Triple compartment, 1 tray per slide
         90 - Triple compartment, 2 trays per slide
     (2) Four digit number indicating tray size
     (3) Number indicating total tray capacity
     (4) Number indicating spacing, in inches
         Number indicating stacks of correctional meal trays (MDC models only)
     (5) Blank
         DD  - Double doors per compartment (front and back)
         HP  - High profile
         INS - Insulated
         LP  - Low profile
         U   - Universal style slides
     (6) Blank
         CB   - Corner bumpers
         DWS  - Drop work shelf
         EH   - Ergonomic "H" style handle
         FWAB - Flush style wrap-around bumper
         MCH  - Stainless steel menu card holder
         MDC-500LCD-UH - Stainless steel urn holder mechanism
         RB   - NSF casters installed on sides
         TH   - Tow hitches bolt to base
         TR   - Top railing
         VR   - Vertical tray stop(s) at rear
     * - NSF Certified model

Preparation/Work/Sorting Table[1] [17]
  DSC-(1)-(2)-(3)*
  MSC-(1)-(2)-(3)*
  PTS-(1)-(2)-(3)
  WTO-(1)-(2)-(3)-KD*
  
[1] Any NSF/ANSI listed product found with this footnote ([1]) will have the applicable
    options specified for the corresponding model in other footnotes noted in listing. These
    options will appear on the model and/or on the literature accompanying the model.
[17] Options for Preparation/Work/Sorting Table:
     (1) M - Mobile
         S - Stationary
     (2) 4 digit number indicating table top dimensions
     (3) ADJ - Adjustable
         PH  - Push handle
         1D  - 1 roll out door
         2D  - 2 roll out door
         SET - Sanitary edge top
         SEB - Sanitary edge base
         3RS - 3 raised sides on top
         UTR - Top-mounted utensil rack
     * - NSF Certified model

Servery Cart[1] [18]
  SC(1)(2)(3)(4)*
  
[1] Any NSF/ANSI listed product found with this footnote ([1]) will have the applicable
    options specified for the corresponding model in other footnotes noted in listing. These
    options will appear on the model and/or on the literature accompanying the model.
[18] Options for Servery Cart:
     (1) M - Mobile
         S - Stationary
     (2) Number indicating unit top size
     (3) Blank
         DS - Double storage
     (4) Blank
         CB  - Corner bumpers
         DB  - Donut bumpers
         PH  - Push handle
         VH  - Ergonomic style handles
         WAB - Wrap-around bumper
     * - NSF Certified Model

Transfer Cart[1] [19]
  DES-ITC-(1)-(2)-(3)-(4)-(5)*
  
[1] Any NSF/ANSI listed product found with this footnote ([1]) will have the applicable
    options specified for the corresponding model in other footnotes noted in listing. These
    options will appear on the model and/or on the literature accompanying the model.
[19] Options for Transfer Cart:
     (1) Number indicating tray size (2 trays per slide)
     (2) Number indicating tray capacity
     (3) Number indicating tray spacing
     (4) ES - Embossed slide design
         WS- Standard wide slide design
     (5) Blank
         CB - Corner bumpers
         DB - Donut bumpers
         DH - Door handle in place of door latch
         DL - Door latch in place of door handle
         SC - Top door security locks
         TH - Tow hitch assembly
         VH - Vertical ergonomic handles
     * - NSF Certified model

Tray and Rack Dispenser - Mobile, Stationary, Self-Leveling, Unheated[1] [20]
  TRD-(1)-(2)-(3)-(4) *
  
[1] Any NSF/ANSI listed product found with this footnote ([1]) will have the applicable
    options specified for the corresponding model in other footnotes noted in listing. These
    options will appear on the model and/or on the literature accompanying the model.
[20] Options for Tray and Rack Dispenser - Mobile, Stationary, Self-Leveling, Unheated:
     (1) M - Mobile
         S - Stationary
     (2) Four digit number representing tray or rack size
     (3) Blank
         2 - Two mechanisms on one unit
     (4) Blank
         2T - Two saucer tubes in unit
     * - NSF Certified model.

Tray and Rack Dispenser - Mobile, Unheated & Heated
  AF-(1)-H-(2)-(3)-(4)-(5)-(6)(7)*[1] [21]
  TRC(1)-(2)-(3)-(4)-(5)-(6)-(7)-8)*[1] [22]
  
[1] Any NSF/ANSI listed product found with this footnote ([1]) will have the applicable
    options specified for the corresponding model in other footnotes noted in listing. These
    options will appear on the model and/or on the literature accompanying the model.
[21] Options for Tray and Rack Dispensers - Mobile, Unheated, and Heated:
     (1) D - Dual heat
         S - Single heat
     (2) M - Mobile
         S - Stationary
     (3) Blank
         1 - One stack per unit
         2 - Two stacks per unit
         3 - Three stacks per unit
     (4) Four digit number representing tray and rack size
     (5) P - Plates  - Special composition (ie. Alicite, Thermacite, etc.)
         B   - Bases (Steel or Alloy composition)
     (6) SCP - Split covers and split platforms
         PR  - Plate rods w/perforated platforms
         EVH - Ergonomic vertical push handles
         DTO - Platform replaced with tubes
     (7)  - Blank or with the following accessory suffixes:
         EVH - Ergonomic Vertical Push Handles
         DB  - Donut Bumpers
         CB  - Corner Bumpers
         NP  - S/S Engraved Nameplate
     * - NSF Certified model.
[22] Options for Tray and Rack Dispensers - Mobile, Unheated, and Heated:
     (1) Blank - Open style
         F - Frame
         C - Enclosed
         H - Heated
     (2) M   - Mobile
         S   - Stationary
         I/C - In-counter
         W   - Wall-mounted
     (3) Four digit number representing tray and rack size
     (4) Blank (square rack)
         P - Projected
         S - Side mounted
     (5) Blank
         2 - Dual (two independent mechanisms)
     (6) Blank
         2T - Two dispensing tubes
     (7) Blank
         O/S-4 - Overshelf - 4 Pan
         8CD   - Overshelf - 8 Tube
     * - NSF Certified model.
     (8) PR  - Plate Rods with perforated platform
         TG  - Tray guide panels
         TGE - Tray guide bars
         EVH - Ergonomic vertical push handles
         HC  - Hinged cover for heated models
         NP  - Nameplate

Tray, Rack, Cutlery, and Condiment Carts and Dollies[1]
  (1)-CD *[23]
  BR-M-(1)-(2)-(3) *[24]
  CC0-(1) *[25]
  GD-(1)-(2)-(3) *[26]
  HPT-(1)-(2)-(3) *[27]
  MTC-(1)-(2)-(3) *[28]
  SCTC-(1)(2)*[29]
  STS-(1)-(2)-(3) *[28]
  TOM-C-(1)(2)(3)*[30]
  TOM-C-(1)*[31]
  
[1] Any NSF/ANSI listed product found with this footnote ([1]) will have the applicable
    options specified for the corresponding model in other footnotes noted in listing. These
    options will appear on the model and/or on the literature accompanying the model.
[23] (1) 08 - 8 cylinder capacity
         10 - 10 cylinder capacity
         xx - Custom cylinder capacity
     * - NSF Certified model
[24] 1)Four digit number indicating bread rack or break basket size. Four digit number
     indicating custom platform size
     (2) 1 - 1 rack or basket
         2 - 2 racks or baskets side by side
         xx - indicating custom number of racks or baskets
     (3) Blank
         CB  - Corner bumpers
         DB  - Donut bumpers
         WAB - Wrap-around bumper
         5   - 5" casters in place of 4" standard casters
     * - NSF Certified model
[25] (1) 04 - 4 pan capacity
         08 - 8 pan capacity
         xx - Custom pan capacity
     * - NSF Certified model
[26] 1) Four digit number indicating rack, basket, or platform size
     (2) 1 - 1 rack or basket
         2 - 2 racks or baskets side by side
         x - Custom number of racks or baskets
     (3) Blank
         CB  - Corner bumpers
         DB  - Donut bumpers
         WAB - Wrap-around bumper
     * - NSF Certified model
[27] (1) Four digit number indicating platform size
     (2) SS - Stainless steel
     (3) Blank
         CB  - Corner bumpers
         DB  - Donut bumpers
         WAB - Wrap-around bumper
         H2  - Secondary handle for 2 handle position
         DLA - Drop lock assembly each end
     * - NSF Certified model
[28] (1) Four digit number indicating tray or rack size
     (2) Blank
         P   - Projected platform
         S   - Sidemount platform
         2   - 2 trays side by side projected
         OS4 - Double tray storage with 4 pan cutlery overshelf
     (3) Blank
         CB - Corner bumpers
         DB - Donut bumpers
         DH - Drain hole in base
     * - NSF Certified model
[29] 1) 4860 - 60" height x 48" length
        6060 - 60" height x 48" length
        xxxx - Custom height x custom length
     (2) Blank
         1 - 1 level overshelf
         2 - 2 level overshelf
     * - NSF Certified Model
[30] (1) 4 digit number representing custom platform size for trays
     (2) 1 - 1 stack of trays
         2 - 2 stacks for trays
     (3) 8CD  - 8 cylinder overshelf
         10CD - 10 cylinder overshelf
         xxCD - Custom number cylinder overshelf
         4OS  - 4 pan overshelf
         8OS  - 8 pan overshelf
         XOS  - Custom number pan overshelf
     * - NSF Certified model
[31] (1) 60 - 10 cylinder overshelf, 25" tray storage height
        61 - 10 cylinder overshelf, 20" tray storage height
        63 - 4 pan overshelf, 25" tray storage height
        64 - 4 pan overshelf, 20" tray storage height
        65 - 8 pan overshelf, 25" tray storage height
     * - NSF Certified model

Utility Cart - Corrections Cart[1] [32]
  MDC-(1)-(2)-(3) *
  
[1] Any NSF/ANSI listed product found with this footnote ([1]) will have the applicable
    options specified for the corresponding model in other footnotes noted in listing. These
    options will appear on the model and/or on the literature accompanying the model.
[32] Options for Corrections Cart:
     (1) Four digit number indicating shelf size
     (2) Number indicating number of shelves
     (3) Blank
         CB  - Corner bumpers
         CUD - Coffee urn device - removable
         DWS - Drop work shelf, S/S
         WAB - Wrap-around bumper
     * - NSF Certified model

Utility Cart - EUC Series, MUC Series, TUC Series, UC Series[1] [33]
  (1)UC(2)(3)(4)(5) *
  
[1] Any NSF/ANSI listed product found with this footnote ([1]) will have the applicable
    options specified for the corresponding model in other footnotes noted in listing. These
    options will appear on the model and/or on the literature accompanying the model.
[33] Options for EUC, MUC, TUC, and UC Series:
     (1) Blank
         E - Economy
         M - Medium
         T - Transport
     (2) Blank
         A - Angle leg construction
         T - Tubular leg construction
     (3) Four digit number indicating shelf size
     (4) Number indicating number of shelves
     (5) Blank
         CB  - Corner bumpers
         DB  - Donut bumpers
         VH  - Ergonomic style push handles
         WAB - Wrap-around bumpers
     * - NSF Certified model

Utility Cart - QMF Series, QMS Series, QMT Series[1] [34]
  QM(1)-(2)-(3)-(4) *
  
[1] Any NSF/ANSI listed product found with this footnote ([1]) will have the applicable
    options specified for the corresponding model in other footnotes noted in listing. These
    options will appear on the model and/or on the literature accompanying the model.
[34] Options for QMF, QMS, and QMT Series:
     (1) F - Flat style shelf profile
         S - Sanitary edge shelf profile
         T - Tilted style shelf profile
     (2) Four digit number indicating shelf size
     (3) Number indicating number of shelves
     (4) Blank
         CB - Corner bumpers
         DB - Donut bumpers
         VH - Ergonomic style push handles
     * - NSF Certified model

Utility Cart - TOM Series[1] [35]
  TOM-(1)-(2)(3) *
  
[1] Any NSF/ANSI listed product found with this footnote ([1]) will have the applicable
    options specified for the corresponding model in other footnotes noted in listing. These
    options will appear on the model and/or on the literature accompanying the model.
[35] Options for TOM Series:
     (1) Four digit number indicating shelf size
     (2) Number indicating number of shelves
     (3) Blank
         CB - Corner bumpers
         DB - Donut bumpers
         VH - Ergonomic style push handles
     * - NSF Certified model

Utility Cart - UC-BIN Series, BUC-BIN Series[1] [36]
  (1)UC-BIN-(2)-(3)(4) *
  
[1] Any NSF/ANSI listed product found with this footnote ([1]) will have the applicable
    options specified for the corresponding model in other footnotes noted in listing. These
    options will appear on the model and/or on the literature accompanying the model.
[36] Options for UC-BIN and BUC-BIN Series
     (1) Blank
         B - Bus boxes or bins
     (2) Four digit number indicating shelf size
     (3) Number indicating number of shelves
     (4) Blank
         CB  - Corner bumpers
         PH1 - Push handle 1 end
         PH2 - Push handle 2 ends
         WAB - Wrap-around bumper
     * - NSF Certified model

Utility Table/Cart - Mobile or Stationary, SS, Single or Double Compartments[1] [37]
  (1)(2)(3)(4)-(5)-(6)-(7)-(8) *
  
[1] Any NSF/ANSI listed product found with this footnote ([1]) will have the applicable
    options specified for the corresponding model in other footnotes noted in listing. These
    options will appear on the model and/or on the literature accompanying the model.
[37] (1) Blank
         C - Cook
     (2) Blank
         B - Beverage
         C - Coffee or chill
         I - Insulated (tray style)
         M - Menu
         P - Plated
     (3) B - Bowl
         C - Cart
         I - Inspection
         M - Meal or mixer
         P - Portioning
         R - Rejection
         S - Slicer, servery or starter
         T - Toaster or tray
         U - Utility or urn
     (4) C - Cart
         T - Table
         S - Stand
     (5) M - Mobile
         S - Stationary
     (6) Blank
         DS   - Double storage
         LB   - Lower base shelf (only)
         1220 - Pan size
     (7) Four digit number indicating table top size
     (8) Accessories
         Blank
         CB   - Corner bumpers
         DB   - Donut bumpers
         OSF  - Flat style overshelf
         OSS  - Sloped style overshelf
         SMPS - Side mounted overshelf
         WAB  - Wrap-around bumper
         VH   - Ergonomic style push handles
     * - NSF Certified model.

Wire Dish Cart[1] [38]
  UDCW-(1)-(2)-(3)*
  
[1] Any NSF/ANSI listed product found with this footnote ([1]) will have the applicable
    options specified for the corresponding model in other footnotes noted in listing. These
    options will appear on the model and/or on the literature accompanying the model.
[38] Options for Wire Dish Cart
     (1) S - Single compartment
         D - Double compartment
     (2) Four digit number representing storage dimension
     (3) Blank - No accessories
         AD-1 - 1 wire dish divider
         AD-2 - 2 wire dish dividers
         AD-3 - 3 wire dish dividers
         AD-4 - 4 wire dish dividers
         CB  - Corner bumpers
         SEB - Sanitary edge solid base
         WAB - Wrap-around bumper
     * - NSF Certified model.

Wire Dish Cart - Mobile, Stainless Steel, Welded Wire, Adjustable Height[1] [39]
  WDC-(1)(2) *
  
[1] Any NSF/ANSI listed product found with this footnote ([1]) will have the applicable
    options specified for the corresponding model in other footnotes noted in listing. These
    options will appear on the model and/or on the literature accompanying the model.
[39] Options for Wire Dish Cart- Mobile
     (1) S - Single compartment
         D - Double compartment
     (2) Four digit number representing storage dimensions
     * - NSF Certified model.

COMPONENTS:

Drop-In Dispenser[1] [40]
  (1)(2)(3)(4)-DI-(5)*
  
[1] Any NSF/ANSI listed product found with this footnote ([1]) will have the applicable
    options specified for the corresponding model in other footnotes noted in listing. These
    options will appear on the model and/or on the literature accompanying the model.
[40] Options for Drop-In Dispensers
     (1) Blank
         T - With trays
         A - Adjustable
         D - Disposable plates
         E - Egg
     (2) D  - Diameter
         R  - Rectangle
         S  - Square
         SN - Single napkin
         SB - Single bread
         F - Flat
     (3) T - Tube
         N  - Napkin
         B - Bread
     (4) O - Open
         C  - Enclosed
         H  - Heated
         D - Dispenser
     (5) Corresponding tube size for particular china, or napkin size
         1 - Single Bread Dispenser
     * - NSF Certified model

Tray and Rack Dispenser - Retractable, Drop-In, Self Leveling, Unheated[1] [41]
  RTA-R-DI-(1)*
  
[1] Any NSF/ANSI listed product found with this footnote ([1]) will have the applicable
    options specified for the corresponding model in other footnotes noted in listing. These
    options will appear on the model and/or on the literature accompanying the model.
[41] (1) Four digit suffix indicating tray or rack size.
     * - NSF Certified model

Number of matching Manufacturers is 1
Number of matching Products is 53
Processing time was 0 seconds