NSF Product and Service Listings
These NSF Official Listings are current as of Sunday, July 26, 2026 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/food/Listings.asp?Standard=002&Company=C0056086&
NSF/ANSI 2
Food Equipment
Food Equipment
| Choice Equipment Company, Inc. | |
| 540 Hog Mountain Road | |
| Suite 130 | |
| Jefferson, GA 30549 | |
| United States | |
| 706-693-2484 | |
| Visit this company's website |
Facility : Jefferson, GA
|
Can Rack[1] |
|
| CR (4)-(5)-(6) | |
[1] (4) With or without the following suffix:
E - Economy unit
(5) *** - Number of can capacity
(6) With or without the following suffixes:
A - Aluminum top
ADJ - Adjustable feet
FF - First-in, first-out
M - Mobile unit
PT - Poly top
SS - Stainless steel top
520U - Heavy-duty reinforcement construction, 5 x 2 casters
620U - 6x2 poly-u caster
COR - Tamper proof Correctional Hardware, and 6" x 2" Wheel Upgrade
|
|
|
Enclosed Cabinet[2] |
|
| CC (1)-(2)-(3)-(4)-(5) | |
[2] (1) With or without the following suffixes:
SR - Solid side with open front and back
M - Modular Decking
U – Universal angle
A – Adjustable Angle
(2) ** Open Width in Inches
(3) ** - Tray capacity
(4) ** Numeric Value indicating Tray Spacing
(5) With or without the following suffixes:
** - Height or depth in inches
620U - 6x2 poly-u caster
B - Corner bumper
CB - Continuous full perimeter bumper
HD - Heavy-duty reinforcement construction, 5 x 2 casters
ODL - Open door latch
CD - Clear Poly Carbonate Door
COR - Tamper proof Correctional Hardware, and 6" x 2" Wheel Upgrade
|
|
|
Food Trays[9] |
|
| FT(1)(2)-(3)(4)-(5)-(6) | |
[9] (1) Type of Material
1 – Aluminum
3 - Stainless Steel
(2) Gauge Thickness of Material
0 – 20 GA.
1 – 18 GA.
2 – 16 GA.
3 – 14 GA.
4 – 12 GA.
5 – 11 GA.
6 – 3/16
7 – 0.25
(3) Numerical value indicating Outside Length (1 - 3 digits in inches)
(4) Numerical value indicating Outside Width (1 - 3 digits in inches)
(5) Numerical value indicating Height of Product (1 or 2 digits in inches)
(6) With or without the following suffix in this order
D – Drain Hole
(7) With or without the following suffix in this order
P – Perforated
H – Hanging
|
|
|
Meat Press[8] |
|
| FH1(1)(2)-(3)(4)-(5)(6) | |
[8] (1) Type of Material
1 - Aluminum
3 - Stainless Steel
(2) Thickness of Material
0 – 20 GA.
1 – 18 GA.
2 – 16 GA.
3 – 14 GA.
4 – 12 GA.
5 – 11 GA.
6 – 3/16
7 – 0.25
(3) Numerical value indicating Inside Length (1 or 2 digits in inches)
(4) Numerical value indicating Inside Width (1 or 2 digits in inches)
(5) With or without the following suffix in this order
D – Hole
RD – Round
SQ – Square
H – Handle
HP – Plastic Handle (Must be NSF Approved)
L* – Leg (Height of Leg) (EX. L.25) (1- 4 digits)
(6) With or without the following suffix in this order
RD – Round
SQ – Square
HP – Plastic Handle (Must be NSF Approved)
L* – Leg (Height of Leg) (EX. L.25) (1- 4 digits)
|
|
|
Mixer[8] |
|
| FH6(1)(2)-(3)(4)-(5) | |
[8] (1) Type of Material
1 - Aluminum
3 - Stainless Steel
(2) Thickness of Material
0 – 20 GA.
1 – 18 GA.
2 – 16 GA.
3 – 14 GA.
4 – 12 GA.
5 – 11 GA.
6 – 3/16
7 – 0.25
(3) Numerical value indicating Inside Length (1 or 2 digits in inches)
(4) Numerical value indicating Inside Width (1 or 2 digits in inches)
(5) With or without the following suffix in this order
D – Hole
RD – Round
SQ – Square
H – Handle
HP – Plastic Handle (Must be NSF Approved)
L* – Leg (Height of Leg) (EX. L.25) (1- 4 digits)
(6) With or without the following suffix in this order
RD – Round
SQ – Square
HP – Plastic Handle (Must be NSF Approved)
L* – Leg (Height of Leg) (EX. L.25) (1- 4 digits)
|
|
|
Pan Rack[3] [4] |
|
| PR10- (1)-(2)-(3)-(4)-(5)-(6) | |
| PR12- (1)-(2)-(3)-(4)-(5)-(6) | |
| PR15 -(1)-(2)-(4)-(5)-(6) | |
| PR17- (1)-(2)-(3)-(4)-(6) | |
| PR18- (1)-(2)-(3)-(4)-(5)-(6) | |
| PR20- (1)-(2)-(3)-(4)-(5)-(6) | |
| PR22- (1)-(2)-(3)-(4)-(5)-(6) | |
| PR25- (1)-(2)-(3)-(4)-(5)-(6) | |
| PR30- (1)-(2)-(4)-(5)-(6) | |
| PR35- (1)-(2)-(3)-(4) | |
| PR40- (1)-(2)-(4)-(6) | |
| PR55- (1)-(2)-(4)-(5)-(6) | |
| PR58- (1)-(2)-(3)-(4)-(5)-(6) | |
| PR60- (1)-(2)-(3)-(4)-(5)-(6) | |
| PR70- (1)-(2)-(4)-(5)-(6)-(7) | |
| PR80- (1)-(2)-(3)-(4)-(8)-(9)-(6) | |
[3] (1) With or without the following suffix:
E - Economy unit
(2) Material Type
A - Aluminum
S - Stainless
(3) ** - Opening dimension in inches
(4) ** - Number of shelves, tray capacity
(5) With or without the following suffixes:
/** - Height or depth in inches
H - Half size
(6) With or without the following suffixes:
-520U - 5" x 2" poly-u caster
-620U - 6x2 poly-u caster
-HD - Heavy-duty reinforcement construction, 5 x 2 casters
-AT - Aluminum top
-B - Corner bumper
-BK - Caster brake
-H - Handle
-PT - Poly top
-SB - Solid base
-SBCB - Solid base with continuous bumper
-ST - Stainless top
-TGA - Tray guard, aluminum
-TGS - Tray guard, stainless steel
-VB - Vertical bumper
-COR - Tamper proof Correctional Hardware, and 6" x 2" Wheel Upgrade
- W - Wall mount unit
(7) Either or the following suffixes:
P - Platter rack
T - Tray rack
(8) With or without the following suffix:
-D - Double deep rack
(9) With or without the following suffixes:
-A - A-lift
-AD - Adamatic oven
-B - B-lift
-BA - Bakers-Aid oven
-BX - Baxter oven
-C - C-lift
-HO - Hobart oven
-LA - Lang oven
-LK - Lucks oven
-PIN - Bottom carousel oven
-RV - Revent oven
[4] With or without the following suffix:
Blk - Black coating
Green - Green coating
|
|
|
Scooper[8] |
|
| FH2(1)(2)-(3)(4)-(5) | |
[8] (1) Type of Material
1 - Aluminum
3 - Stainless Steel
(2) Thickness of Material
0 – 20 GA.
1 – 18 GA.
2 – 16 GA.
3 – 14 GA.
4 – 12 GA.
5 – 11 GA.
6 – 3/16
7 – 0.25
(3) Numerical value indicating Inside Length (1 or 2 digits in inches)
(4) Numerical value indicating Inside Width (1 or 2 digits in inches)
(5) With or without the following suffix in this order
D – Hole
RD – Round
SQ – Square
H – Handle
HP – Plastic Handle (Must be NSF Approved)
L* – Leg (Height of Leg) (EX. L.25) (1- 4 digits)
(6) With or without the following suffix in this order
RD – Round
SQ – Square
HP – Plastic Handle (Must be NSF Approved)
L* – Leg (Height of Leg) (EX. L.25) (1- 4 digits)
|
|
|
Scraper[8] |
|
| FH4(1)(2)-(3)(4)-(5) | |
[8] (1) Type of Material
1 - Aluminum
3 - Stainless Steel
(2) Thickness of Material
0 – 20 GA.
1 – 18 GA.
2 – 16 GA.
3 – 14 GA.
4 – 12 GA.
5 – 11 GA.
6 – 3/16
7 – 0.25
(3) Numerical value indicating Inside Length (1 or 2 digits in inches)
(4) Numerical value indicating Inside Width (1 or 2 digits in inches)
(5) With or without the following suffix in this order
D – Hole
RD – Round
SQ – Square
H – Handle
HP – Plastic Handle (Must be NSF Approved)
L* – Leg (Height of Leg) (EX. L.25) (1- 4 digits)
(6) With or without the following suffix in this order
RD – Round
SQ – Square
HP – Plastic Handle (Must be NSF Approved)
L* – Leg (Height of Leg) (EX. L.25) (1- 4 digits)
|
|
|
Shelving Unit[4] [5] |
|
| SU10-(1)-(2)-(3)-(4)-(5)[5] | |
| SU15-(1)-(2)-(3)-(4)-(5)[5] | |
| SU20-(1)-(2)-(4)-(5)[5] | |
| SU20-AP-(6)-(5)[4][5] | |
| SU30-(1)-(2)-(6)-(4)-(15)[5] | |
| SU31-(1)-(2)-(6)-(3)-(4)[5] | |
| SU32-(1)-(2)-(6)-(3)-(4)[5] | |
| SU33-(1)-(2)-(6)-(3)-(4)[5] | |
| SU35-(1)-(2)-(15)[5] | |
| SU40-(7)-(8)-(1)-(2)-(6)-(15) | |
| SU45-(7)-(1)-(2)-(6)-(15) | |
| SU48-(12)-(13)-(1)-(2)-(3)-(4)-(14)-(15) | |
| SU50-(1)-(2)-(3)-(9)-(5)[5] | |
| SU55-(1)-(2)-(3)-(9)-(5)[5] | |
| SU60-(1)-(2)-(3)-(4)-(6)[5] | |
| SU65-(1)-(2)-(3)-(4)-(6)[5] | |
| SU70-(1)-(2)-(3)-(10)[5] | |
| SU90-(1)-(2)-(4)-(11)[5] | |
| SU95-(1)-(2)-(4)[5] | |
| SU96-(1)-(2)-(4)[4] | |
| SU98-(1)-(2)-(4)[4] | |
[4] With or without the following suffix:
Blk - Black coating
Green - Green coating
[4] With or without the following suffix:
Blk - Black coating
Green - Green coating
[5] (1) ** - Width dimension in inches
(2) ** - Depth dimension in inches
(3) * - Number of shelves
(4) Shelf style
C - Channel style shelf
S – Solid Shelf
T - Tubular style shelf
T-Bar - T-bar style shelf
MWS – Microwave Wall Shelf
(5) With or without the following suffixes:
-5M - 5" caster
-5MBK - 5" caster w/brake
-ADJ - Adjustable foot
-ADJF - Adjustable flanged foot
-B - Corner bumper
-620U - 6x2 poly-u caster
-HT – Handle and High Top Sides
COR - Tamper proof Correctional Hardware, and 6” x 2” Wheel Upgrade
-820U – 8x2 Poly-U Caster
(6) ** - Height in inches
(7) * - Keg capacity
(8) With or without the following suffixes:
AP76 - 76" Pole
B4 - Bottom shelf for 4 keg unit
B6 - Bottom shelf for 6 keg unit
B8 - Bottom shelf for 8 keg unit
B10 - Bottom shelf for 10 keg unit
T4 - Top shelf for 4 keg unit
T6 - Top shelf for 6 keg unit
T8 - Top shelf for 8 keg unit
T10 - Top shelf for 10 keg unit
U4 - U-brace for 4 keg unit
U6 - U-brace for 6 keg unit
U8 - U-brace for 8 keg unit
U10 - U-brace for 10 keg unit
(9) With or without the following suffixes:
-1" - 1" spacing
-1.5" - 1.5" spacing
-2" - 2" spacing
-2.75" – 2.75” Spacing
-3" - 3" spacing
(10) Either or one of the following suffixes:
T - Table mount unit
W - Wall mount unit
(11) Eith or without the following suffixes:
PR36 - 36" pot rack bar
PR48 - 48" pot rack bar
PR60 - 60" pot rack bar
(11) Either or without the following suffixes:
PR36 - 36" pot rack bar
PR48 - 48" pot rack bar
PR60 - 60" pot rack bar
(12) With or without the following suffixes:
TS - Top Shelf
BS - Bottom Shelf
MS - Middle Shelf
(13) With or without the following suffixes:
LU - Left Upright
RU - Right Upright
MU - Middle Upright
(14) With or without the following suffixes:
AO - Add-On
(15) With or without the following suffixes:
H – Half Size, No Top Shelf
24TB – 24" Deep Top Shelf
[5] (1) ** - Width dimension in inches
(2) ** - Depth dimension in inches
(3) * - Number of shelves
(4) Shelf style
C - Channel style shelf
S – Solid Shelf
T - Tubular style shelf
T-Bar - T-bar style shelf
MWS – Microwave Wall Shelf
(5) With or without the following suffixes:
-5M - 5" caster
-5MBK - 5" caster w/brake
-ADJ - Adjustable foot
-ADJF - Adjustable flanged foot
-B - Corner bumper
-620U - 6x2 poly-u caster
-HT – Handle and High Top Sides
COR - Tamper proof Correctional Hardware, and 6” x 2” Wheel Upgrade
-820U – 8x2 Poly-U Caster
(6) ** - Height in inches
(7) * - Keg capacity
(8) With or without the following suffixes:
AP76 - 76" Pole
B4 - Bottom shelf for 4 keg unit
B6 - Bottom shelf for 6 keg unit
B8 - Bottom shelf for 8 keg unit
B10 - Bottom shelf for 10 keg unit
T4 - Top shelf for 4 keg unit
T6 - Top shelf for 6 keg unit
T8 - Top shelf for 8 keg unit
T10 - Top shelf for 10 keg unit
U4 - U-brace for 4 keg unit
U6 - U-brace for 6 keg unit
U8 - U-brace for 8 keg unit
U10 - U-brace for 10 keg unit
(9) With or without the following suffixes:
-1" - 1" spacing
-1.5" - 1.5" spacing
-2" - 2" spacing
-2.75" – 2.75” Spacing
-3" - 3" spacing
(10) Either or one of the following suffixes:
T - Table mount unit
W - Wall mount unit
(11) Eith or without the following suffixes:
PR36 - 36" pot rack bar
PR48 - 48" pot rack bar
PR60 - 60" pot rack bar
(11) Either or without the following suffixes:
PR36 - 36" pot rack bar
PR48 - 48" pot rack bar
PR60 - 60" pot rack bar
(12) With or without the following suffixes:
TS - Top Shelf
BS - Bottom Shelf
MS - Middle Shelf
(13) With or without the following suffixes:
LU - Left Upright
RU - Right Upright
MU - Middle Upright
(14) With or without the following suffixes:
AO - Add-On
(15) With or without the following suffixes:
H – Half Size, No Top Shelf
24TB – 24" Deep Top Shelf
|
|
|
Spatula[8] |
|
| FH3(1)(2)-(3)(4)-(5) | |
[8] (1) Type of Material
1 - Aluminum
3 - Stainless Steel
(2) Thickness of Material
0 – 20 GA.
1 – 18 GA.
2 – 16 GA.
3 – 14 GA.
4 – 12 GA.
5 – 11 GA.
6 – 3/16
7 – 0.25
(3) Numerical value indicating Inside Length (1 or 2 digits in inches)
(4) Numerical value indicating Inside Width (1 or 2 digits in inches)
(5) With or without the following suffix in this order
D – Hole
RD – Round
SQ – Square
H – Handle
HP – Plastic Handle (Must be NSF Approved)
L* – Leg (Height of Leg) (EX. L.25) (1- 4 digits)
(6) With or without the following suffix in this order
RD – Round
SQ – Square
HP – Plastic Handle (Must be NSF Approved)
L* – Leg (Height of Leg) (EX. L.25) (1- 4 digits)
|
|
|
Utensil Holder[9] |
|
| UH(1)(2)-(3)(4)-(5)-(6)(7) | |
[9] (1) Type of Material
1 – Aluminum
3 - Stainless Steel
(2) Gauge Thickness of Material
0 – 20 GA.
1 – 18 GA.
2 – 16 GA.
3 – 14 GA.
4 – 12 GA.
5 – 11 GA.
6 – 3/16
7 – 0.25
(3) Numerical value indicating Outside Length (1 - 3 digits in inches)
(4) Numerical value indicating Outside Width (1 - 3 digits in inches)
(5) Numerical value indicating Height of Product (1 or 2 digits in inches)
(6) With or without the following suffix in this order
D – Drain Hole
(7) With or without the following suffix in this order
P – Perforated
H – Hanging
|
|
|
Utility Cart[6] |
|
| UC10-(26)-(27)-(28)-(29) | |
| UC100-(26)-(27)-(29) | |
| UC12-(26)-(27)-(28)-(29) | |
| UC130-(26)-(27)-(28)-(29) | |
| UC140 | |
| UC20-(26)-(27)-(28)-(29) | |
| UC200-(26)-(27)-(29) | |
| UC21-(26)-(27)-(28)-(29) | |
| UC22-(26)-(27)-(28)-(29) | |
| UC25-(26)-(27)-(28)-(29) | |
| UC30-(26)-(27)-(29) | |
| UC65-(26)-(27)-(28)-(29)-(30) | |
| UC70-(26)-(27)-(28)-(29) | |
| UC80-(26)-(27)-(28)-(29) | |
[6] (26) ** - Width in inches
(27) ** - Depth in inches
(28) * - Number of shelves
(29) With or without the following suffixes:
HD - Heavy-duty 5 x 2 caster
LD - All lips down
VB - Vertical bumper
520U - 5" x 2" poly-u caster
(30) With or without the following suffixes:
B – Corner Bumper
6 – 6 Wheels
(31) With or without the following suffixes:
B – Corner Bumper
6 – 6 Wheels
|
|
|
Work Table[7] |
|
| TB(1)(2)(3)-(4)(5)-(6)(7)(8)(9)(10)(11) | |
[7] (1) Work Table Top Type
3 - Standard Duty 16 GA. Top
4 - Heavy Duty 14 GA. Top
5 - Poly Top Board
6 - Equipment Stand 14GA Top with 3 Lips Up
(2) Type Of Undershelf:
0 - Galvanized Under Shelf
1 - Open Base with U-Brace
3 - Stainless Steel Undershelf
(3) Numeric value indicating Lip Height
(4) Numeric Value Indicating Table Depth
(5) Numeric Value Indicating Table Width
(6) With or without the following suffix:
** - Numeric Value indicating custom height
(7) With or without the following suffixes:
-5MTPR - 5" TPR Casters, 2 with Brakes
-5M - 5" Poly-Urethane Casters
-BK - Extra Set of Brakes added to the Table
-ADJF - Adj flanged foot
(8) With or without the following suffix:
-****SD - Stainless steel Drawer with Numeric Value for width and depth
(9) With or without the following suffix:
-**SO - Single Overshelf with Numeric Value for depth
(10) With or without the following suffix:
-****SC - Scrap shute with Numeric Value for diameter
(11) With or without one of the following suffix:
-*BS - Numerical Value with BS for Additional Bottom Shelves
-**TS* - Tray slides with Numeric Value indicating width and Depth and Spacing
|
|
|
COMPONENTS: |
|
|
Half Pan Divider |
|
| PR17-D | |
Number of matching Manufacturers is 1
Number of matching Products is 62
Processing time was 0 seconds
