NSF Product and Service Listings

These NSF Official Listings are current as of Thursday, January 15, 2026 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/food/Listings.asp?Standard=002&Company=C0057352&

NSF/ANSI 2
Food Equipment


 
Ningbo HeLi Metal Products Co., Ltd. 
No. 498, Jiangbei Road
Jiangbei District 
Ningbo, Zhengjiang 3105033 
China 
86 574 8307 6838
Visit this company's website

Facility : Zhejiang, China


Dish Table[1]
  HL-(1)DT(2)(3)
  
[1] (1) Table top type:
        C - Clean dish table without bowl
        S - Soiled dish table with bowl
    (2) Top shelf length in inches from left to right.
    (3) Drain board configuration:
        L - Left
        R - Right

Drop In Sink[2]
  HL-DIS-(1)C(2)(3)(4)
  
[2] (1) Number of sink bowls.
    (2) Interior dimension of sink bowl in inches from left to right.
    (3) Interior dimention of sink bowl in inches from front to back.
    (4) Depth of bowl.

Equipment Stand[3]
  HL-EQS(1)X(2)
  HL-EQS(1)X(2)+CT5W
  
[3] (1) Width in inches
    (2) Length in inches

Floor Mop Sink[4]
  HL-FMS-(1)(2)(3)
  
[4] (1) Interior dimension of sink bowl in inches from left to right.
    (2) Interior dimension of sink bowl in inches from front to back.
    (3) Depth of bowl.

Folding Work Tables[5]
  HSW-(1)FD
  HSW-(1)FD+CT4W
  
[5] "HSW" indicates HeLi worktable
    (1) Numerical suffix (-2424, 2430, etc.) indicates width & length of work surface in
        inches.
    (2) Suffix CS indicates worktable is made of 430SS with Chromium plating undershelf &
    legs.
        Suffix E indicates worktable is made of 430SS with galvanized undershelf & legs.
        Suffix S indicates worktable is made of 304SS with galvanized undershelf & legs.
        Suffix SB indicates unit is identical to E series, but has 1 1/2" upturned   
        backsplash.
        Suffix SSB indicates unit is identical to S series, but has 1 1/2" upturned 
        backsplash.
        Suffix SB-2 indicates unit is identical to E series, but has 2" upturned 
        backsplash.
        Suffix SB-4 indicates unit is identical to E series, but has 4" upturned 
        backsplash.
        Suffix SB-5 indicates unit is identical to E series, but has 5" upturned 
        backsplash.
        Suffix SS indicates worktable, undershelf and legs are made of stainless
    steel(304ss,430ss,201ss 201ss 301ss 316ss etc).

Hand Sink[6]
  HL-HS-(1)-(2)
  
[6] (1) Hand sink length in inches from left to right.
    (2) SP - Side splashes
        BR - Brackets
        PS - Pedestal base

Over Shelf[7]
  HL-(1)OS(2)X(3)
  
[7] (1) Number of shelves:
        S - Single shelf
        D - Double shelves
        T - Triple shelves
    (2) Shelf width in inches from front to back
    (3) Shelf length in inches from left to right

Stainless Steel Sink[8]
  H(A)(B)(1)-(2)-(C)(3)
  
[8] "H" indicates HeLi Sink
    (A) Alphabetical suffix S indicates 304 S/S sinks.
    (B) Alphabetical suffix A indicates 18 gauge of stainless steel.
        Alphabetical suffix B indicates 16 gauge of stainless steel.
    (1) Numerical suffix 18 indicates 18"Lx18"Wx11"D sink bowl.
        Numerical suffix 24 indicates 24"Lx24"Wx14"D sink bowl.
        Numerical suffix 1812 indicates 18"Lx18"Wx12"D sink bowl.
        Numerical suffix 1814 indicates 18"Lx18Wx14?D sink bowl.
        Numerical suffix 2412 indicates 24"Lx24"Wx12"D sink bowl.
        Numerical suffix 1824 indicates 18"Lx24"Wx14"D sink bowl.
        Numerical suffix 1821 indicates 18"Lx21"Wx14"D sink bowl.
    (2) Numerical suffix (-1,-2,-3,-4, etc.) indicates number of sink compartments.
    (C) Alphabetical suffix L indicates drainboard is on left.
        Alphabetical suffix R indicates drainboard is on right.
        Alphabetical suffix D indicates double drainboard (on both sides).
    (3) Numerical suffix 0 indicates no drainboard.
        Numerical suffix (-L18, -L24, etc.) indicates length of drainboard; 18 indicates
        18" drainboard and 24 indicates 24" drainboard.

Stainless Steel Worktable[5]
  HSW-(1)(2)
  HSW-(1)(2)+CT4W
  
[5] "HSW" indicates HeLi worktable
    (1) Numerical suffix (-2424, 2430, etc.) indicates width & length of work surface in
        inches.
    (2) Suffix CS indicates worktable is made of 430SS with Chromium plating undershelf &
    legs.
        Suffix E indicates worktable is made of 430SS with galvanized undershelf & legs.
        Suffix S indicates worktable is made of 304SS with galvanized undershelf & legs.
        Suffix SB indicates unit is identical to E series, but has 1 1/2" upturned   
        backsplash.
        Suffix SSB indicates unit is identical to S series, but has 1 1/2" upturned 
        backsplash.
        Suffix SB-2 indicates unit is identical to E series, but has 2" upturned 
        backsplash.
        Suffix SB-4 indicates unit is identical to E series, but has 4" upturned 
        backsplash.
        Suffix SB-5 indicates unit is identical to E series, but has 5" upturned 
        backsplash.
        Suffix SS indicates worktable, undershelf and legs are made of stainless
    steel(304ss,430ss,201ss 201ss 301ss 316ss etc).

Wall Shelf[3]
  HL-WMS(1)X(2)
  
[3] (1) Width in inches
    (2) Length in inches

Number of matching Manufacturers is 1
Number of matching Products is 13
Processing time was 0 seconds