NSF Product and Service Listings
These NSF Official Listings are current as of Friday, January 30, 2026 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/food/Listings.asp?Standard=002&Company=C0162070&
NSF/ANSI 2
Food Equipment
Food Equipment
| Jiaxing Jiaye Kitchen & Bath Technology Co., Ltd. DBA STABLEINK DBA HAINOX | |
| No.99 Jinxing East Road | |
| Caoqiao, Pinghu 314200 | |
| China | |
| 86 574 8102 8702 |
Facility : Pinghu, China
|
Bar Sink[5] [6] |
|
| HN-BS(1)T(2)(3)(4)-(5)(6)-(7)-(8)-(9) | |
[5] (1) Number of sink compartments
(2) Interior dimension of sink bowl in inches from left to right
(3) Interior dimension of sink bowl in inches from front to back
(4) Depth of bowl
(5) Dimension of drainboard in inch
(6) Drainboard configuration:
L - Left
R - Right
LR - Left and right
(7) Material of sink:
3 - 304
4 - 430
blank - 304SS
(8) Thickness of material
14 – 14 gauge
16 – 16 gauge
18 – 18 gauge
20 – 20 gauge
22 - 22 gauge
Blank – 18 gauge
(9) Bowl position:
L - left side
R - right side
C - corner
Blank- middle
L,R,C can show together or separate
(10) Can be any one to eight letters or numbers to represent sink
[6] Product may be sold with or without the drainboard.
|
|
|
Dish Table[1] [6] |
|
| HN-DT(1)(2)(3) | |
[1] (1) Table top type:
C - Clean dish table without bowl
S - Soiled dish table with bowl
(2) Top shelf length in inches from left to right
(3) Drain board configuration:
L - Left
R - Right
[6] Product may be sold with or without the drainboard.
|
|
|
Drop in Sink[2] |
|
| HN-DIS-(1)C(2)(3)(4) | |
[2] (1) Number of sink bowls
(2) Interior dimension of sink bowl in inches from left to right
(3) Interior dimension of sink bowl in inches from front to back
(4) Depth of bowl
|
|
|
Drop-In Ice Bin[10] |
|
| IBD-(1)(2)(3)(4)-(9)-(11) | |
[10] (1) Bowl width
(2) Bowl length
(3) Bowl height
(4) Bowl material: 3:304, 4:430
(5) Undershelf material: 2:201, 3:304, 4:430; G: galv steel
(6) F: feet , W: caster
(7) L: with Liquor display, blank: without
(8) S: with shelf, blank: without
(9) B: wash bowl, blank: without
(10) 1: with bottle bowl, blank: without
(11) Can be any one to eight letters or numbers or blank to represent Ice bin
|
|
|
Exhaust Hood |
|
| EH(6)-(1)(2)(3)-(4)(5)[9] | |
[9] (1) product width in inch
(2) product depth in inch
(3) product length in inch
(4) Material type: 2:201, 3:304, 4:430, Blank: 430
(5) Material thickness: 14: 14guage, 16: 16guage, 18: 18guage, 20:20guage, 22: 22 guage,
Blank: 18guage
(6): Alphabet indicates different structure: A, B or blank
|
|
|
Floor Mop Sink[3] [8] |
|
| HN-FMS-(1)(2)(3) | |
[3] (1) Interior dimension of sink bowl in inches from left to right.
(2) Interior dimension of sink bowl in inches from front to back.
(3) Depth of bowl
[8] Product may be sold with or without the backsplash.
|
|
|
Hand Sink[4] |
|
| HN-HS-(1)-(2) | |
[4] (1) Hand sink length in inches from left to right
(2) SP - Side splashes
BR - Brackets
PS - Pedestal base
|
|
|
Ice Bin[10] |
|
| IB-(1)(2)(3)(4)(5)-(7)(9)(10)-(11) | |
| IBW-(1)(2)(3)(4)(5)-(6)(8)-(11) | |
[10] (1) Bowl width
(2) Bowl length
(3) Bowl height
(4) Bowl material: 3:304, 4:430
(5) Undershelf material: 2:201, 3:304, 4:430; G: galv steel
(6) F: feet , W: caster
(7) L: with Liquor display, blank: without
(8) S: with shelf, blank: without
(9) B: wash bowl, blank: without
(10) 1: with bottle bowl, blank: without
(11) Can be any one to eight letters or numbers or blank to represent Ice bin
|
|
|
Overshelf for Dry Environment Only[9] |
|
| OS-(1)(2)-(3)(4)-(9) | |
| OSD-(1)(2)-(3)(4)-(9) | |
| OSDRE-(1)(2)-(3)(4)-(9) | |
| STOS-OS-(1)(2)-(3)(4)-(5)(6)(7)(8) | |
[9] (1) product width in inch
(2) product depth in inch
(3) product length in inch
(4) Material type: 2:201, 3:304, 4:430, Blank: 430
(5) Material thickness: 14: 14guage, 16: 16guage, 18: 18guage, 20:20guage, 22: 22 guage,
Blank: 18guage
(6): Alphabet indicates different structure: A, B or blank
|
|
|
Sink[5] [6] |
|
| HN-C(1)T(2)(3)(4)-(5)(6)-(7)-(8)-(9)-(10) | |
| HN-CS(1)T(2)(3)(4)-(5)(6)-(7)-(8)-(9)-(10) | |
[5] (1) Number of sink compartments
(2) Interior dimension of sink bowl in inches from left to right
(3) Interior dimension of sink bowl in inches from front to back
(4) Depth of bowl
(5) Dimension of drainboard in inch
(6) Drainboard configuration:
L - Left
R - Right
LR - Left and right
(7) Material of sink:
3 - 304
4 - 430
blank - 304SS
(8) Thickness of material
14 – 14 gauge
16 – 16 gauge
18 – 18 gauge
20 – 20 gauge
22 - 22 gauge
Blank – 18 gauge
(9) Bowl position:
L - left side
R - right side
C - corner
Blank- middle
L,R,C can show together or separate
(10) Can be any one to eight letters or numbers to represent sink
[6] Product may be sold with or without the drainboard.
|
|
|
Wall Shelf[7] |
|
| HN-WS(1)(2) | |
[7] (1) Width in inches
(2) Length in inches
(3) Metal type under shelf:
S - Stainless
G - Galvanized
Blank - Galvanized
(4) Top shelf type:
Blank - Flat Top
B1.5 - 1.5" Rear edge up
B - 2" Rear edge up
B2 - 2" Rear edge up
B2LRB -2" Turn up at left, right and back edge
B1LRB -1" Turn up at left, right and back edge
B-FLRB - Turn up at front, left, right and back edge
B4 - 4" Backsplash
BL4 - 4" Back and left splash
BR4 - 4" Back and right splash
BL2 - 2" Back and left splash
BR2 - 2" Back and right splash
B5 - 2" Back and right splash
B6 - 6" Backsplash
(5) Thickness of the top shelf material in guage
14-14guage
16-16guage
18-18guage
20-20guage
22-20guage
Blank-18guage
(6) Material of top shelf worktable
3 - 304
4 - 430
(7) Legs materaial
Blank-Galvanized
S - Stainless
G - Galvanized
(8) Structure difference
Blank- Ordinary
A- top bull nose, undershelf 135 degree
B- top bull nose, tube undershelf
C- top bull nose, undershelf with Alu. cast corner
D- top 135 degree, undershelf 135 degree
E- top 135 degree, tube undershelf
F- top 135 degree, undershelf with Alu. cast corner
(9) Structure difference
Blank- Ordinary
C- have cutting board on top
S -top Sorting
F- the leg can Fold
W- table use caster
H- have H hat channel
Worktable may sell with or without caster.
|
|
|
Wall Shelf for Mounting Microwave[7] |
|
| HN-MS(1)(2) | |
[7] (1) Width in inches
(2) Length in inches
(3) Metal type under shelf:
S - Stainless
G - Galvanized
Blank - Galvanized
(4) Top shelf type:
Blank - Flat Top
B1.5 - 1.5" Rear edge up
B - 2" Rear edge up
B2 - 2" Rear edge up
B2LRB -2" Turn up at left, right and back edge
B1LRB -1" Turn up at left, right and back edge
B-FLRB - Turn up at front, left, right and back edge
B4 - 4" Backsplash
BL4 - 4" Back and left splash
BR4 - 4" Back and right splash
BL2 - 2" Back and left splash
BR2 - 2" Back and right splash
B5 - 2" Back and right splash
B6 - 6" Backsplash
(5) Thickness of the top shelf material in guage
14-14guage
16-16guage
18-18guage
20-20guage
22-20guage
Blank-18guage
(6) Material of top shelf worktable
3 - 304
4 - 430
(7) Legs materaial
Blank-Galvanized
S - Stainless
G - Galvanized
(8) Structure difference
Blank- Ordinary
A- top bull nose, undershelf 135 degree
B- top bull nose, tube undershelf
C- top bull nose, undershelf with Alu. cast corner
D- top 135 degree, undershelf 135 degree
E- top 135 degree, tube undershelf
F- top 135 degree, undershelf with Alu. cast corner
(9) Structure difference
Blank- Ordinary
C- have cutting board on top
S -top Sorting
F- the leg can Fold
W- table use caster
H- have H hat channel
Worktable may sell with or without caster.
|
|
|
Worktable[7] |
|
| FDW-WT(1)(2)-(3)-(4) | |
| HN-WT(1)(2)X(3)-(4) | |
| HN-WT(9)-(1)(2)-(3)-(4)-(5)(6)-(7)-(8) | |
| NH-WT(9)-(1)(2)-(3)-(4)-(5)(6)-(7)-(8) | |
[7] (1) Width in inches
(2) Length in inches
(3) Metal type under shelf:
S - Stainless
G - Galvanized
Blank - Galvanized
(4) Top shelf type:
Blank - Flat Top
B1.5 - 1.5" Rear edge up
B - 2" Rear edge up
B2 - 2" Rear edge up
B2LRB -2" Turn up at left, right and back edge
B1LRB -1" Turn up at left, right and back edge
B-FLRB - Turn up at front, left, right and back edge
B4 - 4" Backsplash
BL4 - 4" Back and left splash
BR4 - 4" Back and right splash
BL2 - 2" Back and left splash
BR2 - 2" Back and right splash
B5 - 2" Back and right splash
B6 - 6" Backsplash
(5) Thickness of the top shelf material in guage
14-14guage
16-16guage
18-18guage
20-20guage
22-20guage
Blank-18guage
(6) Material of top shelf worktable
3 - 304
4 - 430
(7) Legs materaial
Blank-Galvanized
S - Stainless
G - Galvanized
(8) Structure difference
Blank- Ordinary
A- top bull nose, undershelf 135 degree
B- top bull nose, tube undershelf
C- top bull nose, undershelf with Alu. cast corner
D- top 135 degree, undershelf 135 degree
E- top 135 degree, tube undershelf
F- top 135 degree, undershelf with Alu. cast corner
(9) Structure difference
Blank- Ordinary
C- have cutting board on top
S -top Sorting
F- the leg can Fold
W- table use caster
H- have H hat channel
Worktable may sell with or without caster.
|
|
|
COMPONENTS: |
|
|
Undershelf for Worktable[7] |
|
| GU-(1)(2)-(3) | |
[7] (1) Width in inches
(2) Length in inches
(3) Metal type under shelf:
S - Stainless
G - Galvanized
Blank - Galvanized
(4) Top shelf type:
Blank - Flat Top
B1.5 - 1.5" Rear edge up
B - 2" Rear edge up
B2 - 2" Rear edge up
B2LRB -2" Turn up at left, right and back edge
B1LRB -1" Turn up at left, right and back edge
B-FLRB - Turn up at front, left, right and back edge
B4 - 4" Backsplash
BL4 - 4" Back and left splash
BR4 - 4" Back and right splash
BL2 - 2" Back and left splash
BR2 - 2" Back and right splash
B5 - 2" Back and right splash
B6 - 6" Backsplash
(5) Thickness of the top shelf material in guage
14-14guage
16-16guage
18-18guage
20-20guage
22-20guage
Blank-18guage
(6) Material of top shelf worktable
3 - 304
4 - 430
(7) Legs materaial
Blank-Galvanized
S - Stainless
G - Galvanized
(8) Structure difference
Blank- Ordinary
A- top bull nose, undershelf 135 degree
B- top bull nose, tube undershelf
C- top bull nose, undershelf with Alu. cast corner
D- top 135 degree, undershelf 135 degree
E- top 135 degree, tube undershelf
F- top 135 degree, undershelf with Alu. cast corner
(9) Structure difference
Blank- Ordinary
C- have cutting board on top
S -top Sorting
F- the leg can Fold
W- table use caster
H- have H hat channel
Worktable may sell with or without caster.
|
|
Number of matching Manufacturers is 1
Number of matching Products is 22
Processing time was 0 seconds
