NSF Product and Service Listings

These NSF Official Listings are current as of Sunday, April 20, 2025 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/food/Listings.asp?Standard=007&Company=C0549749&

NSF/ANSI 7
Commercial Refrigerators and Storage Freezers


 
COOLREF LLC 
11221 Braesridge Drive
Houston, TX 77071 
United States 
832-364-3159
Visit this company's website

Facility : Houston, TX


Component:

Custom Refrigerator and Freezer Doors for Walk-ins[1]
  SL(1)(2)(3)(4)-(5)(6)(7)
  SW(1)(2)(3)(4)-(5)(6)(7)
  
[1] (1)  Door material (AL for Aluminum, AW for Aluminum with white coating, and
         SS for Stainless Steel).
    (2)  Number of sides around the Swing doors (3 for door with 3 sides that is
         without floor insulation, 4 for door with 4 sides that is with floor 
         insulation).  For Slide Doors, it will always be 4 sides.
    (3)  Door functioning (C for Cooler and F for Freezer).
    (4)  Foam thickness (4 for 4 inches, 5 for 5 inches, and 6 for 6 inches of
         insulated foam).
    (5)  Door dimensions (Width x Height in inches).
    (6)  Side of the hinge for Swing Doors (S should be replaced with LH for left
         hinge and RH for right hinge.  It is determined by standing facing the
         front of the door).  Side of open for Slide Doors (S should be replaced
         with LO for Left Opening and RO for Right Opening).
    (7)  For doors with diamond plates at the bottom of the front and the back side.
         For kick in purpose. (Optional for Swing Doors only. Slide doors do not need
         kick plate).

Number of matching Manufacturers is 1
Number of matching Products is 2
Processing time was 0 seconds