NSF Product and Service Listings
These NSF Official Listings are current as of Friday, July 18, 2025 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/food/Listings.asp?Standard=002&Company=C0696547&
NSF/ANSI 2
Food Equipment
Food Equipment
Elkay Interior Systems International, Inc. | |
241 North Broadway | |
Suite 600 | |
Milwaukee, WI 53202 | |
United States | |
414-847-0714 | |
Visit this company's website |
Facility : Zhuhai, China
Equipment custom built in compliance with NSF Standard 2‡ |
|
‡ This manufacturer is not authorized to use the NSF Mark in association with any electrical or gas operated products that are designed to provide safe temperatures during the storage, holding, rethermalization, or rapid pull down of food products. |
|
Hand Sink[5] [8] |
|
EHS-(2)-(8) | |
SEHS-(2)-(8) | |
WCL(5)(2)(3)OSD(6)(7) | |
[5] May or may not have suffix X. [8] (1) Mounting: B, P, or blank (2) Length in inches (3) Width in inches (4) Blank or any combination of the following: LRS, M, SAC, TM (5) WO or blank (6) C or blank (7) Number and configuration of faucet holes (8) Options: DHD, KV, PED, SD, SHD, S-L, S-R, SS, STD, TD, TS, WB, or blank |
|
Pot Rack[5] [10] |
|
SLW-(2)-(1) | |
TPR-(2)-(1) | |
[5] May or may not have suffix X. [10] (1) Length in inches (2) Options: C, S, UB, or blank |
|
Shelf[5] [11] |
|
SLANT-(2) | |
[5] May or may not have suffix X. [11] (1) Width in inches (2) Length in inches (3) Number of tiers (4) Metal gauge and series: B, D, E, SL, or blank |
|
Underbar Cabinets[4] |
|
UB-CD(1)X(2)X | |
[4] (1) Two digit numerical value indicating width in inches (2) Two digit numerical value indicating length in inches |
|
Dishtable[5] [6] |
|
(1)(2)DT(3)-(4)-(5) | |
[5] May or may not have suffix X. [6] (1) Metal gauge and series: B, D, SL, or blank (2) Table top type: C, D, U (3) Shape: L, LE, LI, or blank (4) Top shelf length in inches (5) Drain board location: L, R |
|
Exhaust Hood[5] [7] |
|
SLH(1)-(2)-(3) | |
[5] May or may not have suffix X. [7] (1) Option of make-up air (MU) or no make-up air (blank) (2) Length in inches (3) Class of hood (1, I, 2, II) |
|
Hand Sink[5] [8] |
|
CHS(1)(2)(3)(4)(6)(7) | |
[5] May or may not have suffix X. [8] (1) Mounting: B, P, or blank (2) Length in inches (3) Width in inches (4) Blank or any combination of the following: LRS, M, SAC, TM (5) WO or blank (6) C or blank (7) Number and configuration of faucet holes (8) Options: DHD, KV, PED, SD, SHD, S-L, S-R, SS, STD, TD, TS, WB, or blank |
|
Shelf[5] [11] |
|
TMS-(3)-(1)-(2) | |
[5] May or may not have suffix X. [11] (1) Width in inches (2) Length in inches (3) Number of tiers (4) Metal gauge and series: B, D, E, SL, or blank |
|
Stand[5] [12] |
|
(1)ES(2)(3)(4)-ST(5) | |
[5] May or may not have suffix X. [12] (1) Metal gauge and series: SL or blank (2) Width in inches (3) S - shelf, X - cross bracing (4) Length in inches (5) Metal type under table: G, S |
|
Table[5] [13] |
|
(1)WT(2)(3)(4)-(5)(6)-(7) | |
[5] May or may not have suffix X. [13] (1) Metal gauge and series: B, D, DSL, E, PSL, SE, SL, or blank (2) Width in inches (3) S - shelf, X - cross bracing (4) Length in inches (5) B - backsplash, ST - flat top (6) Metal type under table: G, S (7) Backsplash height in inches |
|
Sink |
|
(1)(2)C(3)X(4)-(5)-(6)(10)[5] [16] | |
DI-(8)-(3)(4)(9)[5] [16] | |
FLR-(7)[5] [16] | |
RNSF8(1)(2)(3)(4)[17] | |
WNSF8(1)(2)(3)(4)[17] | |
[5] May or may not have suffix X. [16] (1) Metal gauge and series: 14, B, E, S, SE, SL, or blank (2) Number of compartments (3) Interior dimension of sink bowl in inches, left to right (4) Interior dimension of sink bowl in inches, front to back (5) Drain board location: L, R, 2, 0 (6) Drain board length in inches (7) Mop sink model: 1, 2, 3, 4 (8) Compartments: 1C, 2C, 3C, or blank (9) Bowl depth in inches (10) Corner: -L or blank [17] (1) Number of sink compartments (2) Length in inches (3) Blank or any combination of the following: L, OF, R (4) Number and configuration of faucet holes [18] (1) Number of Compartments (2) Width of complete sink (3) Length of complete sink (4) Direction of Drainboard or no drainboard: L - Left DB R - Right DB 0 - No DB (5) Drainboard length (in inches) |
|
Cup Dispenser[21] |
|
ESCD(1)(2)(3) | |
[21] (1) Cup size S - Short T - Tall, G - Grande V - Venti (2) H - Hot C - Cold (3) S - Slot or B - Blank |
|
Underbar Speed Rails - Double[1] |
|
UB-SRD(1)X | |
[1] (1) Two digit numerical value indicating width in inches (2) Two digit numerical value indicating length in inches (3) Number of shelves |
|
Sink |
|
UB-(1)C(2)X(3)-(4)-(5)X[18] | |
[5] May or may not have suffix X. [16] (1) Metal gauge and series: 14, B, E, S, SE, SL, or blank (2) Number of compartments (3) Interior dimension of sink bowl in inches, left to right (4) Interior dimension of sink bowl in inches, front to back (5) Drain board location: L, R, 2, 0 (6) Drain board length in inches (7) Mop sink model: 1, 2, 3, 4 (8) Compartments: 1C, 2C, 3C, or blank (9) Bowl depth in inches (10) Corner: -L or blank [17] (1) Number of sink compartments (2) Length in inches (3) Blank or any combination of the following: L, OF, R (4) Number and configuration of faucet holes [18] (1) Number of Compartments (2) Width of complete sink (3) Length of complete sink (4) Direction of Drainboard or no drainboard: L - Left DB R - Right DB 0 - No DB (5) Drainboard length (in inches) |
|
Underbar Speed Rails - Single[1] |
|
UB-SRS(1)X | |
[1] (1) Two digit numerical value indicating width in inches (2) Two digit numerical value indicating length in inches (3) Number of shelves |
|
Underbar Hand Sink[4] |
|
UB-HS(1)X(2)X | |
[4] (1) Two digit numerical value indicating width in inches (2) Two digit numerical value indicating length in inches |
|
Underbar Drainboard[3] |
|
UB-DB(1)(2)X(3)X | |
[3] (1) Location: LC - left corner, RC - right corner, S - standard (2) Two digit numerical value indicating width in inches (3) Two digit numerical value indicating length in inches |
|
Underbar Blender Station - Dump Sink[4] |
|
UB-BS(1)X(2)X | |
[4] (1) Two digit numerical value indicating width in inches (2) Two digit numerical value indicating length in inches |
|
Underbar Beer Drainer[4] |
|
UB-BD(1)X(2)X | |
[4] (1) Two digit numerical value indicating width in inches (2) Two digit numerical value indicating length in inches |
|
Underbar Ice Bin[4] |
|
UB-IB(1)X(2)X | |
[4] (1) Two digit numerical value indicating width in inches (2) Two digit numerical value indicating length in inches |
|
Underbar Cabinets[4] |
|
UB-CO(1)X(2)X | |
[4] (1) Two digit numerical value indicating width in inches (2) Two digit numerical value indicating length in inches |
|
Exhaust Hood[5] [7] |
|
BDH(1)-(2)-(3) | |
VBH(1)-(2)-(3) | |
[5] May or may not have suffix X. [7] (1) Option of make-up air (MU) or no make-up air (blank) (2) Length in inches (3) Class of hood (1, I, 2, II) |
|
Polytop Table[5] [9] |
|
PT(1)(2)(3)-(4)S | |
[5] May or may not have suffix X. [9] (1) Width in inches (2) S - shelf, X - cross bracing (3) Length in inches (4) B - backsplash, ST - flat top |
|
Pot Rack[5] [10] |
|
DLW-(1) | |
OCM-(1) | |
[5] May or may not have suffix X. [10] (1) Length in inches (2) Options: C, S, UB, or blank |
|
Shelf[5] [11] |
|
(4)WMS-(1)-(2) | |
WMMS-(1)-(2) | |
[5] May or may not have suffix X. [11] (1) Width in inches (2) Length in inches (3) Number of tiers (4) Metal gauge and series: B, D, E, SL, or blank |
|
Tub[5] [14] |
|
TB(1)G(2)X(3)X(4) | |
[5] May or may not have suffix X. [14] (1) Metal gauge (2) Length in inches (3) Width in inches (4) Depth in inches |
|
Sheet Pan Rack[15] |
|
ADR(1)(2)(3)-MX | |
[15] (1) Rack width in inches from front to back (2) Rack length in inches from left to right (3) Rack height in inches from top to bottom |
|
Underbar Liquor Displays - Raised[1] |
|
UB-LD(1)X(2)X-(3)X | |
[1] (1) Two digit numerical value indicating width in inches (2) Two digit numerical value indicating length in inches (3) Number of shelves |
|
Cabinet[5] [19] |
|
(1)C(2)(3)(4)-(5)(6)-(7) | |
[5] May or may not have suffix X. [19] (1) Metal gauge and series: B, D, DSL, PSL, SL, or blank (2) Width in inches (3) S - shelf, X - without shelf (4) Length in inches (5) B - backsplash, ST - flat top (6) D - door, S - open front (7) H - hinged door, S - sliding door |
|
Underbar Corner Filler Table[20] |
|
UB-CFF(1)X(2)-(3)X | |
[20] (1) Two digit numerical value indicating length in inches (2) Two digit numerical value indicating width in inches (3) 45 or 90 indicating table angle |
|
Cup Caddy[2] |
|
ESCCD(1)(2) | |
[2] (1) Quantity of cup dispenser (2) C - Color |
|
Hand Sink[5] [8] |
|
WMHS-1/(8) | |
[5] May or may not have suffix X. [8] (1) Mounting: B, P, or blank (2) Length in inches (3) Width in inches (4) Blank or any combination of the following: LRS, M, SAC, TM (5) WO or blank (6) C or blank (7) Number and configuration of faucet holes (8) Options: DHD, KV, PED, SD, SHD, S-L, S-R, SS, STD, TD, TS, WB, or blank |
|
Exhaust Hood[5] [7] |
|
BH(1)-(2)-(3) | |
VH (2) - (3) | |
[5] May or may not have suffix X. [7] (1) Option of make-up air (MU) or no make-up air (blank) (2) Length in inches (3) Class of hood (1, I, 2, II) |
|
Stand[5] [12] |
|
(1)MS(2)(3)(4)-ST(5) | |
[5] May or may not have suffix X. [12] (1) Metal gauge and series: SL or blank (2) Width in inches (3) S - shelf, X - cross bracing (4) Length in inches (5) Metal type under table: G, S |
|
Underbar Corner Filler Table[20] |
|
UB-CFR(1)X(2)-(3)X | |
[20] (1) Two digit numerical value indicating length in inches (2) Two digit numerical value indicating width in inches (3) 45 or 90 indicating table angle |
|
Sheet Pan Rack[15] |
|
APR(1)(2)-LX | |
[15] (1) Rack width in inches from front to back (2) Rack length in inches from left to right (3) Rack height in inches from top to bottom |
|
Hand Sink[5] [8] |
|
ELV(5)(2)(3)(6)(7) | |
[5] May or may not have suffix X. [8] (1) Mounting: B, P, or blank (2) Length in inches (3) Width in inches (4) Blank or any combination of the following: LRS, M, SAC, TM (5) WO or blank (6) C or blank (7) Number and configuration of faucet holes (8) Options: DHD, KV, PED, SD, SHD, S-L, S-R, SS, STD, TD, TS, WB, or blank |
|
Stand[5] [12] |
|
(1)SES(2)(3)(4)-ST(5) | |
(1)UTMS(2)(3)(4)-ST(5) | |
[5] May or may not have suffix X. [12] (1) Metal gauge and series: SL or blank (2) Width in inches (3) S - shelf, X - cross bracing (4) Length in inches (5) Metal type under table: G, S |
|
COMPONENTS: |
|
Drawer[5] [22] |
|
CT-11-(1)(2)(3) | |
DRSB(1)(2)(3) | |
NDRPS(1)(2)(3) | |
[5] May or may not have suffix X. [22] (1) Width in inches (2) Length in inches (3) Liner type and slide: E, P, S |
Facility : Atlacomulco, Estado de México, Mexico
Equipment custom built in compliance with NSF Standard 2‡ |
|
‡ This manufacturer is not authorized to use the NSF Mark in association with any electrical or gas operated products that are designed to provide safe temperatures during the storage, holding, rethermalization, or rapid pull down of food products. |
|
Catalog Items: |
|
Cabinet[1] [2] |
|
(1)C(2)(3)(4)-(5)(6)-(7) | |
[1] (1) Metal gauge and series: B, D, DSL, PSL, SL, or blank (2) Width in inches (3) S - shelf, X - without shelf (4) Length in inches (5) B - backsplash, ST - flat top (6) D - door, S - open front (7) H - hinged door, S - sliding door [2] May or may not have suffix X. |
|
Sheet Pan Rack[8] |
|
ADR(1)(2)(3)-MX | |
[8] (1) Rack width in inches from front to back (2) Rack length in inches from left to right (3) Rack height in inches from top to bottom |
|
Hand Sink[2] [5] |
|
CHS(1)(2)(3)(4)(6)(7) | |
EHS-(2)-(8) | |
[2] May or may not have suffix X. [5] (1) Mounting: B, P, or blank (2) Length in inches (3) Width in inches (4) Blank or any combination of the following: LRS, M, SAC, TM (5) WO or blank (6) C or blank (7) Number and configuration of faucet holes (8) Options: DHD, KV, PED, SD, SHD, S-L, S-R, SS, STD, TD, TS, WB, or blank |
|
Sheet Pan Rack[8] |
|
APR(1)(2)-LX | |
[8] (1) Rack width in inches from front to back (2) Rack length in inches from left to right (3) Rack height in inches from top to bottom |
|
Hand Sink[2] [5] |
|
ELV(5)(2)(3)(6)(7) | |
SEHS-(2)-(8) | |
WCL(5)(2)(3)OSD(6)(7) | |
WMHS-1/(8) | |
[2] May or may not have suffix X. [5] (1) Mounting: B, P, or blank (2) Length in inches (3) Width in inches (4) Blank or any combination of the following: LRS, M, SAC, TM (5) WO or blank (6) C or blank (7) Number and configuration of faucet holes (8) Options: DHD, KV, PED, SD, SHD, S-L, S-R, SS, STD, TD, TS, WB, or blank |
|
Table[2] [13] |
|
(1)WT(2)(3)(4)-(5)(6)-(7) | |
[2] May or may not have suffix X. [13] (1) Metal gauge and series: B, D, DSL, E, PSL, SE, SL, or blank (2) Width in inches (3) S - shelf, X - cross bracing (4) Length in inches (5) B - backsplash, ST - flat top (6) Metal type under table: G, S (7) Backsplash height in inches |
|
Polytop Table[2] [6] |
|
PT(1)(2)(3)-(4)S | |
[2] May or may not have suffix X. [6] (1) Width in inches (2) S - shelf, X - cross bracing (3) Length in inches (4) B - backsplash, ST - flat top |
|
Dishtable[2] [3] |
|
(1)(2)DT(3)-(4)-(5) | |
[2] May or may not have suffix X. [3] (1) Metal gauge and series: B, D, SL, or blank (2) Table top type: C, D, U (3) Shape: L, LE, LI, or blank (4) Top shelf length in inches (5) Drain board location: L, R |
|
Stand[2] [12] |
|
(1)ES(2)(3)(4)-ST(5) | |
(1)MS(2)(3)(4)-ST(5) | |
(1)SES(2)(3)(4)-ST(5) | |
(1)UTMS(2)(3)(4)-ST(5) | |
[2] May or may not have suffix X. [12] (1) Metal gauge and series: SL or blank (2) Width in inches (3) S - shelf, X - cross bracing (4) Length in inches (5) Metal type under table: G, S |
|
Sink |
|
(1)(2)C(3)X(4)-(5)-(6)(10)[2] [10] | |
DI-(8)-(3)(4)(9)[2] [10] | |
FLR-(7)[2] [10] | |
RNSF8(1)(2)(3)(4)[11] | |
WNSF8(1)(2)(3)(4)[11] | |
[2] May or may not have suffix X. [10] (1) Metal gauge and series: 14, B, E, S, SE, SL, or blank (2) Number of compartments (3) Interior dimension of sink bowl in inches, left to right (4) Interior dimension of sink bowl in inches, front to back (5) Drain board location: L, R, 2, 0 (6) Drain board length in inches (7) Mop sink model: 1, 2, 3, 4 (8) Compartments: 1C, 2C, 3C, or blank (9) Bowl depth in inches (10) Corner: -L or blank [11] (1) Number of sink compartments (2) Length in inches (3) Blank or any combination of the following: L, OF, R (4) Number and configuration of faucet holes |
|
Tub[2] [14] |
|
TB(1)G(2)X(3)X(4) | |
[2] May or may not have suffix X. [14] (1) Metal gauge (2) Length in inches (3) Width in inches (4) Depth in inches |
|
Exhaust Hood[2] [4] |
|
BDH(1)-(2)-(3) | |
BH(1)-(2)-(3) | |
SLH(1)-(2)-(3) | |
VBH(1)-(2)-(3) | |
VH (2) - (3) | |
[2] May or may not have suffix X. [4] (1) Option of make-up air (MU) or no make-up air (blank) (2) Length in inches (3) Class of hood (1, I, 2, II) |
|
Shelf[2] [9] |
|
(4)WMS-(1)-(2) | |
SLANT-(2) | |
TMS-(3)-(1)-(2) | |
WMMS-(1)-(2) | |
[2] May or may not have suffix X. [9] (1) Width in inches (2) Length in inches (3) Number of tiers (4) Metal gauge and series: B, D, E, SL, or blank |
|
Pot Rack[2] [7] |
|
DLW-(1) | |
OCM-(1) | |
SLW-(2)-(1) | |
TPR-(2)-(1) | |
[2] May or may not have suffix X. [7] (1) Length in inches (2) Options: C, S, UB, or blank |
|
COMPONENTS: |
|
Drawer[2] [15] |
|
CT-11-(1)(2)(3) | |
DRSB(1)(2)(3) | |
NDRPS(1)(2)(3) | |
[2] May or may not have suffix X. [15] (1) Width in inches (2) Length in inches (3) Liner type and slide: E, P, S |
Number of matching Manufacturers is 1
Number of matching Products is 93
Processing time was 0 seconds