NSF Product and Service Listings

These NSF Official Listings are current as of Saturday, September 26, 2020 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/food/Listings.asp?CompanyName=colson&


NSF/ANSI 2
Food Equipment



 
Colson Group USA 
3700 Airport Road
Jonesboro, AR 72401-9988 
United States 
800-643-5515 
870-932-4501
Visit this company's website

Facility : Jonesboro, AR


COMPONENTS:

1 Series Casters[1] [2] [3] [4] [5] [6]
  1.(1)(2).(3).(4)
  11.(1)(2).(3).(4)
 
[1] (1) 2 or 3 digit numbers identifying: wheel diameter and capacity - max
        016  - 1 5/8" light duty  - 75 lbs.
        022  - 2" light duty - 75 lbs.
        030  - 3" light duty - 75 lbs.
        033  - 3" medium light duty - 125 lbs.
        043  - 4" medium light duty - 135 lbs.
        053  - 5" medium light duty - 145 lbs.
        16   - 1 5/8" light duty - 75 lbs.
        22   - 2" light duty - 75 lbs.
        30   - 3" light duty - 75 lbs.
        33   - 3" medium light duty - 125 lbs.
        43   - 4" medium light duty - 135 lbs.
        53   - 4" medium light duty - 145 lbs.
[2] (2) 2 digit number identifying: caster type and mounting
        06   - Single ball swivel
        08   - Rigid top plate - medium light duty
        10   - Rigid top plate - light duty
        51   - Swivel grip ring stem
        52   - Swivel w/ toothed adapter
        53   - Swivel w/ pipe thread stem
        54   - Swivel w/ threaded stem
        56   - Swivel large top plate
        66   - Swivel small top plate
        67   - Swivel w/ expanding rubber adapter
        70   - Swivel w/ square stem
[3] (3) Code identifying: type of wheel and bearing
        42   - Cushion rubber, Delrin
        44.7 - Thermoplastic rubber, plain swivel casters only
        45   - Cushion rubber, ball
        52   - Polyolefin, Delrin
        53   - Polyolefin, Delrin
        54.7 - Polyolefin, plain swivel casters only
        55   - Hard rubber, ball
        91   - Polyurethane, Delrin
        441  - Cushion rubber (hi-tech) Performa - Delrin
        615  - Mirrolite rubber, ball
        915  - Mirrolite polyurethane, ball
[4] (4) May have additional codes as necessary as follows:
        Brake: BRK3 side lock brake, BK3 side lock brake
        Mounting: (Note: For use with 'C' codes  51, 54, 67 and 70 above)
        54 threaded stem
        Std    3/8" x 16NC x 1 1/4"
        MTG51  3/8" x 24NFx 1 1/16"
        51 grip ring stem
        MTG1   3/8" x 1 9/16"
        MTG2   7/16" x 1 9/16"
        MTG50  7/16" x 1"
        MTG51  7/16" x 1 29/32" w/o grip ring
        MTG52  7/16" x 1 29/32" w/grip ring
        MTG53  50810 adapter
        MTG54  50842 adapter
        MTG55  50865 adapter
        MTG56  50916 adapter
        MTG57  Ladder stem
        67 stem adapter
        w/o bumper             w/bumper
        MTG40   3/4"-13/16"     MTG40B
        MTG41   7/8"-15/16"     MTG41B
        MTG42   1"-1 1/16"      MTG42B
        MTG43   1 1/8"-1 3/16"  MTG43B
        MTG44   1 1/4"-1 5/16"  MTG44B
        MTG45   1 3/8"-1 7/16"  MTG45B
        MTG46   1 1/2"-1 9/16"  MTG46B
        MTG47   1 5/8"-1 11/16" MTG47B
        MTG51   7/8"-15/16"     MTG51B
        MTG52   1"-1 1/16"      MTG52B
        MTG53   1 1/8"-1 3/16"  MTG53B
        MTG54   1 1/4"-1 5/16"  MTG54B
        MTG55   1 3/8"-1 7/16"  MTG55B
        70 square stem
        Std     3/4" Square x 2"
        MTG1    7/8" Square x 2 1/16"
        Seal: FSI food service industry, NSF Listed
        Axle: AX2 solid axle kit
        Grease fork: GRF1 no grease in fork
        Wheel bearing: WB01 Delrin bearing w/bushing, WB01B Delrin bearing w/o bushing
        Grease wheel: GRW1 no grease in wheel bearing
[5] May include a one digit prefix to indicate specific customer.
[6] 'C' prefix denotes chrome plated.

2 Series Casters[5] [6] [7] [8] [9] [10] [11]
  2.(5)(6).(7).(8)
  22.(5)(6).(7).(8)
  CG10547.000
  CG10548.000
  CG10572.000
  CG10573.000
  CG10574.000
  CG10575.000
  CG10576.000
  CG10577.000
  CG10578.000
 
[5] May include a one digit prefix to indicate specific customer.
[6] 'C' prefix denotes chrome plated.
[7] (5) 2 or 3 digit number identifying: wheel diameter and horn
        020 or 022 - 2 1/2" diameter
        026        - 2 1/2" diameter
        030 or 032 - 3" diameter
        034        - 3 1/2" diameter w/ss bushing
        036        - 3" diameter
        038        - 3" medium light duty
        040 or 042 - 4" diameter
        044        - 4" diameter w/ss bushing
        046        - 4" diameter
        050 or 052 - 5" diameter
        054        - 5" diameter w/ss bushing
        056        - 5" diameter
        057        - 5" x 1 1/4" wheel
        060 or 062 - 6" diameter
        20 or 22   - 2 1/2" diameter
        30 or 32   - 3" diameter
        38         - 3" medium light duty
        40 or 42   - 4" diameter
        50 or 52   - 5" diameter
        60 or 62   - 6" diameter
[8] (6) 2 digit number identifying: caster type and mounting
        08   - Rigid top plate
        37   - Swivel top plate
        51   - Swivel grip ring stem
        53   - Swivel w/ pipe thread stem
        54   - Swivel w/ threaded stem
        56   - Swivel top plate
        67   - Swivel w/ expanding rubber adapter
        70   - Swivel w/ square stem
        80   - Rigid w/ square stem   
        88   - Rigid top plate
        89   - Swivel top plate
        98   - 3" rigid top plate
[9] (7) Code identifying: type of wheel and bearing
        35   - Welded disc rubber - ball
        35.9 - Welded disc polyurethane - ball      
        43   - Cushion rubber (hi-tech) - Delrin
        44   - Soft rubber - nylon
        45   - Cushion rubber (hi-tech) - ball
        52   - Polyolefin - nylon
        53   - Polyolefin - Delrin
        54   - Hard rubber - nylon
        55   - Polyolefin - ball
        61   - Balloon cushion rubber - Delrin
        65   - Balloon cushion rubber - ball
        91   - Moldon polyurethane - Delrin
        95   - Moldon polyurethane - ball
        309  - Phenolic - roller
        319  - Phenolic - roller
        351  - Welded disc rubber - Delrin
        351  - Welded disc polyurethane - Delrin
        441  - Cushion rubber hi-tech Performa - Delrin
        443  - Soft rubber - nylon or sintered metal bushing
        444  - Performa rubber - Delrin with stainless steel bushing
        445  - Cushion rubber hi-tech Performa - ball
        470  - Ecoforma plain bearing
        485  - Grey TPR treadwheel with flange-type ball bearing
        543  - Hard rubber - nylon or sintered metal bushing
        544  - Polyolefin - Delrin with stainless steel bushing
        553  - Polyolefin - nylon or sintered metal bushing
        561  - Cushion rubber hi-tech Performa round tread - Delrin
        565  - Cushion rubber hi-tech Performa round tread - ball
        586  - Plain borewheel    
        611  - Mirrolite rubber - Delrin
        615  - Mirrolite rubber - ball               
        944  - Polyurethane hi-tech Delrin with stainless steel bushing
[10] (8) May have additional codes as necessary as follows:
         Brake: BRK1 tread lock brake (metal), BRK2 techlock brake (plastic)
                BRK5 total lock brake (plastic), BRK6 direction lock brake (plastic)
         Mounting:
         51 grip ring stem
         Std     5/8"x 2 3/16" 
         MTG5    3/4"x2 3/16"
         MTG6    13/16"x2 3/16"
         MTG7    27/32"x2 3/16"
         MTG8    55/64"x2 3/16"
         MTG9    1"x2 3/16"
         MTG845  .845"x2 3/16"
         MTG846  .846"x2 3/16"
         53 pipe thread stem
         Std     3/4"-14NPT
         54 threaded stem
         Std MGT53  1/2"x13NCx1 1/2"
         MTG10   1/2"x13NCx3/4"
         MTG11   1/2"x13NCx1"
         MTG12   1/2"x20NFx3/4"
         MTG13   5/8"x11NCx1 3/4"
         MTG14   5/8"x18NFx1 3/4"
         MTG15   3/4"x18NFx1 3/4"
         MTG50   1/2"x20NFx1 1/2"
         70 square stem
         Std     3/4" Square x 2 1/16"
         MTG1    7/8" Square x 2 1/16"
         MTG3    3/4" Octogon x 2 1/16"
         MTG4    7/8" Square x 2 1/16"
         56 top plate
         Std     2 1/2"x3 5/8" w/slots
         MTG27   3 3/4"x4 3/8" w/slots
         MTG59   3 1/8"x4 1/8" w/ 11/32" holes
         67 stem adapter
         w/o bumper             w/bumper
         MTG40   3/4"-13/16"     MTG40B
         MTG41   7/8"-15/16"     MTG41B
         MTG42   1"-1 1/16"      MTG42B
         MTG43   1 1/8"-1 3/16"  MTG43B
         MTG44   1 1/4"-1 5/16"  MTG44B
         MTG45   1 3/8"-1 7/16"  MTG45B
         MTG46   1 1/2"-1 9/16"  MTG46B
         MTG47   1 5/8"-1 11/16" MTG47B
         MTG51   7/8"-15/16"     MTG51B
         MTG52   1"-1 1/16"      MTG52B
         MTG53   1 1/8"-1 3/16"  MTG53B
         MTG54   1 1/4"-1 5/16"  MTG54B
         MTG55   1 3/8"-1 7/16"  MTG55B
         Seal: FSI food service industry, NSF Listed
         Axle: AX1 zerk axle, AX2 solid axle kit
         Nut: NT1 thick 3/8"x16 lock nut
         Grease fork: GRF1 no grease in fork, GRF3 mid-temp 300° continuous
         Dust cap: DC1 metal dust cap
         Wheel bearing: WB01 Delrin bearing w/ bushing, WB01B Delrin bearing w/o bushing
         (wheel only)
         Grease wheel: GRW1 no grease in wheel, GRW3 mid-temp 300° continuous
         Conductive: COND conductive caster or wheel
         Hi-Temp: HT Hi-temp caster or wheel (wheels HT nylon w/ metal bearings)
         Finish: YELLOW brass-like finish
[11] 'E' prefix denotes "Encore" brand.

3 Series Casters[5] [6] [12] [13] [14] [15]
  3.(9)(10).(11).(12)
  33.(9)(10).(11).(12)
 
[5] May include a one digit prefix to indicate specific customer.
[6] 'C' prefix denotes chrome plated.
[12] (9) 1 or 3 digit number identifying: wheel diameter
         003  - 3" diameter
         004  - 4" diameter
         005  - 5" diameter
         006  - 6" diameter
         3    - 3" diameter
         4    - 4" diameter
         5    - 5" diameter
         6    - 6" diameter
[13] (10) 2 digit number identifying: caster type and mounting
          08   - Rigid top plate
          14   - Swivel with round or square stem
          17   - Swivel top plate
[14] (11) Code identifying: type of wheel and bearing
          34   - Welded disc rubber - ball  
          34.9 - Welded disc polyurethane - ball
          301  - Phenolic - Delrin
          305  - Phenolic - ball
          309  - Phenolic - roller
          341  - Welded disc rubber - Delrin
          341.9 - Welded disc polyurethane - Delrin
          349  - Welded disc rubber - roller
          349.9 - Welded disc polyurethane - roller
          401  - Cushion rubber (hi-tech) - Delrin
          409  - Cushion rubber (hi-tech) - roller
          441  - Cushion rubber (hi-tech) Performa - Delrin
          449  - Cushion rubber (hi-tech) Performa - roller
          601  - Moldon rubber - Delrin
          609  - Moldon rubber - roller
          801  - Polyolefin - Delrin
          802  - Polyolefin - plain
          809  - Polyolefin - roller
          901  - Moldon polyurethane (hi-tech) - Delrin
          909  - Moldon polyurethane (hi-tech) - roller
[15] (12) May have additional codes as necessary as follows:
          Brake: BRK1 tread lock brake
          Mounting:
          MTG7   3/4" Round x 2 1/2"
          MTG9   7/8" Round x 2 1/2"
          MTG11  1" Round x 2 1/2"
          MTG31  7/8" Square x 2 1/2"
          Seal: FSI food service industry
          Axle: AX1 zerk axle, AX2 solid axle
          Nut: NT1 thick 3/8" x 16 lock nut
          Grease fork: GRF1 no grease in fork, GRF2 double grease in fork,
                       GRF3 mid-temp 300° continuous
          Dust cap: DC1
          Wheel bearing:
          w/o bushing   w/bushing
          WB01B         WB01      Delrin bearing, 2 piece
          WB09B         WB09      Standard plastic cage roller bearing
          WB29B         WB29      Standard metal cage roller bearing
          Washer:
          WSR1 metal thrust and retainer washers
          WSR2 sintered iron step washers
          WSR3 sealed metal retainer & steel thrust washers
          GREASE WHEEL: GRW1 no grease in wheel, GRW2 double grease in wheel,
                        GRW3 mid-temp 300° continuous

4 Series Casters 1 3/8 & 1 1/2 Tread Widths[5] [6] [16] [17] [18] [19] [20]
  4.(13)(14)(15).(16).(17)
  44.(13)(14)(15).(16).(17)
 
[5] May include a one digit prefix to indicate specific customer.
[6] 'C' prefix denotes chrome plated.
[16] (13) 1 or 2 digit number identifying: wheel diameter
          03 - 3" diameter
          04 - 4" diameter
          05 - 5" diameter
          06 - 6" diameter
          08 - 8" diameter
          3  - 3" diameter
          4  - 4" diameter
          5  - 5" diameter
          6  - 6" diameter
          8  - 8" diameter
[17] (14) Code identifying: top plate size
          1 - 4" x 4 1/2" top plate w/ seals
          2 - 4 1/2" x 6 1/4" top plate
          4 - 5" x 5 1/2" top plate
[18] (15) Code identifying: caster type
          08   - Rigid top plate
          09   - Swivel top plate
          79   - Impak swivel top plate
          98   - Rigid top plate
          99   - Swivel top plate
[19] (16) Code identifying: type of wheel and bearing
          35  - Welded disc - ball
          311 - Phenolic - Delrin
          312 - Phenolic - plain
          315 - Phenolic - ball
          319 - Phenolic - roller
          351 - Welded disc - Delrin
          359 - Welded disc - roller
          411 - Cushion rubber (hi-tech) - Delrin
          419 - Cushion rubber (hi-tech) - roller
          441 - Cushion rubber hi-tech Performa - Delrin
          449 - Cushion rubber hi-tech Performa - roller
          611 - Moldon rubber - Delrin
          619 - Moldon rubber - roller
          811 - Polyex II - Delrin
          812 - Polyex II - plain
          816 - Hi-temperature (HT)
          819 - Polyex II - roller
          911 - Polyurethane (hi-tech) - Delrin
          919 - Polyurethane (hi-tech) - roller
[20] (17) May have additional codes as necessary as follows:
          Brake: BRK1 tread lock brake
          Mounting:
          MTG7   3/4" Round x 2 1/2"
          MTG9   7/8" Round x 2 1/2"
          MTG11  1" Round x 2 1/2"
          MTG31  7/8" Square x 2 1/2"
          Seal: FSI food service industry
          Axle: AX1 zerk axle, AX2 solid axle
          Nut: NT1 Thick 1/2" x 13 Lock Nut, NT2 Thin 1/2" x 13 Lock Nut
          Grease fork: GRF1 no grease in fork, GRF2 double grease in fork,
                       GRF3 mid-temp 300° continuous
          Dust cap: DC1 metal dust cap
          Wheel bearing:
          w/o bushing   w/bushing
          WB01B         WB01      Delrin bearing, 2 piece
          WB09B         WB09      Standard plastic cage roller bearing
          WB29B         WB29      Standard metal cage roller bearing
          Washer:
          WSR1 metal thrust and retainer washers
          WSR2 sintered iron step washers
          WSR3 sealed metal retainer & steel thrust washers
          Grease wheel: GRW1 no grease in wheel, GRW2 double grease in wheel,
                        GRW3 mid-temp 300° continuous
          Conductive: COND conductive caster or wheel
          Hi-temp: HT Hi-temp wheel or caster (wheels HT nylon w/metal bearings)
          Finish: YELLOW brass-like finish

4 Series Casters 2" Tread Widths[5] [6] [21] [22] [23] [24] [25]
  4.(18)(19)(20).(21).(22)
  4.08199.555 SS BRK 7
  44.(18)(19)(20).(21).(22)
 
[5] May include a one digit prefix to indicate specific customer.
[6] 'C' prefix denotes chrome plated.
[21] (18) 1 or 2 Digit Identifying:  Wheel Diameter
          03   - 3 1/4" diameter
          04   - 4" diameter
          05   - 5" diameter
          06   - 6" diameter
          08   - 8" diameter
           3   - 3 1/4" diameter
           4   - 4" diameter
           5   - 5" diameter
           6   - 6" diameter
           8   - 8" diameter
[22] (19) Code identifying: top plate size
          1 - 4" x 4 1/2" top plate
          2 - 4 1/2" x 6 1/4" top plate
          4 - 5" x 5 1/2" top plate
[23] (20) Code identifying: caster type
          07   - Swivel top plate w/seals
          08   - Rigid top plate
          09   - Swivel top plate
          79   - Impak swivel top plate
          97   - Swivel top plate w/seals
          98   - Rigid top plate
          99   - Swivel top plate
[24] (21) Code identifying: type of wheel and bearing
          SS   - Stainless Steel
          55   - Round tread, TPR tread on polypropylene core with twin precision ball 
                 bearings
          61   - Moldon balloon rubber - Delrin  
          69   - Moldon balloon rubber - roller     
          331  - Phenolic - Delrin
          339  - Phenolic - roller
          431  - Cushion rubber (hi-tech) - Delrin
          439  - Cushion rubber (hi-tech) - Roller
          441  - Cushion rubber (hi-tech) Performa - Delrin
          449  - Cushion rubber (hi-tech) Performa - roller
          451  - Cushion rubber (hi-tech) Performa - Delrin
          451-2- Cushion rubber (hi-tech) Performa - Delrin (w/black tread)
          459  - Cushion rubber (hi-tech) Performa - roller
          459-2- Cushion rubber (hi-tech) Perofrma - roller (w/black tread)
          465  - Cushion rubber (hi-tech) Performa - 3/4 x 1 3/16 or 1 3/8 ball
          465-2- Cushion rubber (hi-tech) Performa - 3/4 x 1 3/16 or 1 3/8 ball
                 (w/black tread)
          475  - Cushion rubber (hi-tech) Performa - 3/4 x 1 5/8 ball
          531  - Maxim nylon - Delrin
          534  - Maxim nylon - bronze
          539  - Maxim nylon - roller
          551  - Cushion rubber (hi-tech) Performa round tread - Delrin
          555  - Round tread, TPR tread on polypropylene core with twin precision ball 
                 bearings
          559  - Cushion rubber (hi-tech) Performa round Tread - roller
          565  - Cushion rubber (hi-tech) Performa round tread - 3/4 x 1 3/16 or 1 3/8 ball
          575  - Cushion rubber (hi-tech) Performa round tread - 3/4 x 1 5/8 ball
          621  - Low profile rubber - Delrin
          629  - Low profile rRubber - roller
          631  - Moldon rubber - Delrin
          639  - Moldon rubber - roller
          665  - Moldon balloon rubber - ball
          731  - V-groove - Delrin
          739  - V-groove - roller
          831  - Polyex II - Delrin
          832  - Polyex II - plain
          839  - Polyex II - roller
          831.3- Nylon - Delrin
          832.3- Nylon - plain
          836  - Hi-temperature (HT)
          839.9- Nylon - Roller
          921  - Polyurethane (hi-tech) - Delrin
          929  - Polyurethane (Hi-Tech) - roller
          931  - Moldon polyurethane - Delrin
          939  - Moldon polyurethane - roller
          939.3- Moldon nylon
[25] (22) May have additional codes as necessary as follows:
          Brake: BRK1 tread lock brake 
                 BRK2 tech lock brake
                 BRK3 side lock brake
                 BRK4 top mounted tread lock brake
                 BRK7 top mounted tread lock brake
          Mounting:
          MTG51 #1 swivel lock top plate
          MTG2  #2 top plate
          MTG4  #4 top plate
          Seal: FSI food service industry
          Axle:
          AX1 zerk axle kit with lock washer & nut
          AX2 solid axle kit with lock washer & nut
          Nut: NT1 thick 1/2" x 13" lock nut, NT2 thin 1/2" x 13" lock nut
          GREASE FORK: GRF1 no grease in fork, GRF2 double grease in fork,
                       GRF3 mid-temp 300° continuous
          Wheel Bearing:
          Four series (2" tread) wheels
          w/o bushing   w/bushing
          WB01B         WB01      Standard two piece delrin
          WB11B         WB11      Delrin brg, 1 pc w/steel washers
          WB09B         WB09      Standard plastic cage roller brg
          WB19B         WB19      Torrington style w/hytrel washers
          WB29B         WB29      Standard steel cage roller bearing
          Four series (1 1/2" tread) wheels
          w/o bushing   w/bushing
          WB01B         WB01      Standard two piece Delrin
          WB09B         WB09      Standard plastic cage roller Brg
          WB29B         WB29      Standard steel cage roller bearing
                        WB31      Delrin brg w/ 1/2"ID x 1 7/8" bushing
                        WB39      Plastic cage roller brg w/ 1/2"ID x 1 7/8" bushing
                        WB49      Metal cage roller brg w/ 1/2"ID x 1 7/8" bushing
          Washer:
          WSR1 metal thrust and retainer washers
          WSR2 sintered iron step washers
          WSR3 sealed metal retainer and steel thrust washers
          Grease wheel: GRW1 no grease in wheel, GRW2 double grease in wheel,
                        GRW3 mid range 300° continuous              
          Conductive: COND Conductive Caster or Wheel
          Hi-temp: HT hi-temp caster or wheel
          Stainless steel: SS all metal parts are stainless steel

6 Series Casters 2" Tread Widths[5] [6] [26] [27] [28] [29] [30]
  6.(23)(24)(25).(26).(27)
  66.(23)(24)(25).(26).(27)
 
[5] May include a one digit prefix to indicate specific customer.
[6] 'C' prefix denotes chrome plated.
[26] (23) Wheel diameter
          04   - 4" diameter
          05   - 5" diameter
          06   - 6" diameter
          08   - 8" diameter
[27] (24) Code identifying: top plate size
          2    - 4 1/2" x 6 1/4" top plate
[28] (25) Code identifying: caster type
          08   - Rigid top plate
          09   - Swivel top plate
          98   - Rigid top plate
          99   - Swivel top plate
[29] (26) Code identifying: type of wheel and bearing
          61   - Moldon balloon rubber - Delrin
          69   - Moldon balloon rubber - roller
          331  - Phenolic - Delrin
          339  - Phenolic - roller
          431  - Cushion rubber (hi-tech) - Delrin
          439  - Cushion rubber (hi-tech) - roller
          441  - Cushion rubber (hi-tech) Performa - Delrin
          449  - Cushion rubber (hi-tech) Performa - roller
          451  - Cushion rubber (hi-tech) Performa - Delrin
          451-2- Cushion rubber (hi-tech) Performa - Delrin (w/black tread)
          459  - Cushion rubber (hi-tech) Performa - roller
          459-2- Cushion rubber (hi-tech) Performa - roller (w/black tread)
          465  - Cushion rubber (hi-tech) Performa - 3/4 x 1 3/16 or 1 3/8 ball
          465-2- Cushion rubber (hi-tech) Performa - 3/4 x 1 3/16 or 1 3/8 ball
                 (w/black tread)
          475  - Cushion rubber (hi-tech) Performa - 3/4 x 1 5/8 ball
          531  - Maxim nylon - Delrin
          534  - Maxim nylon - bronze
          539  - Maxim nylon - roller
          551  - Cushion rubber (hi-tech) Performa round tread - Delrin
          559  - Cushion rubber (hi-tech) Performa round tread - roller
          565  - Cushion rubber (hi-tech) Performa round tread - 3/4 x 1 3/16 or 1 3/8 ball
          575  - Cushion rubber (hi-tech) Performa Round tread - 3/4 x 1 5/8 ball      
          621  - Low profile rubber - Delrin
          629  - Low profile rubber - roller
          631  - Moldon rubber - Delrin
          639  - Moldon rubber - roller
          665  - Moldon balloon rubber - ball
          731  - V-groove - Delrin
          739  - V-groove - roller
          831  - Polyex 11 - Delrin
          832  - Polyex 11 - plain
          839  - Polyex 11 - roller
          831.3- Nylon - Delrin
          832.3- Nylon - plain
          836  - Hi-temperature (HT)
          839.9- Nylon - Roller
          921  - Polyurethane (hi-tech) - Delrin
          929  - Polyurethane (hi-tech) - roller
          931  - Moldon polyurethane - Delrin
          939  - Moldon polyurethane - roller
          939.3- Moldon nylon
[30] (27) May have additional codes as necessary as follows:
          Brake: BRK1 tread lock brake
          Seal: FS1 food service industry
          Axle: AX1 zerk axle kit with lock washer & nut
                AX2 solid axle kit with lock washer & nut
          Nut: NT1 thick 1/2" x 13" lock nut
               NT2 thin 1/2" x 13" lock nut
          Grease fork: GRF1 no grease in fork, GRF2 double grease in fork,
                       GRF3 mid-temp 300° continuous
          Wheel bearing:
          Four series (2" tread) wheels
          w/o bushing   w/bushing
          WB01B         WB01      Standard two piece Delrin
          WB11B         WB11      Delrin brg, 1 pc w/steel washers
          WB09B         WB09      Standard plastic cage roller brg
          WB19B         WB19      Torrington style w/hytrel washers
          WB29B         WB29      Standard steel cage roller bearing
          Washer:
          WSR1 metal thrust and retainer washers
          WSR2 sintered iron step washers
          WSR3 sealed metal retainer & steel thrust washers
          Grease wheel: GRW1 no grease in wheel, GRW2 double grease in wheel,
                        GRW3 mid-range 300° continuous
          Conductive: COND conductive caster or wheel
          Hi-temp: HT hi-temp caster or wheel (wheels HT nylon w/metal bearings)

7 Series Casters with 2 1/2 and "and 3" Tread Widths[5] [6] [31] [32]
  7.06658.(28).(29)
  7.06659.(28).(29)
  7.08658.(28).(29)
  7.08659.(28).(29)
  7.10658.(28).(29)
  7.10659.(28).(29)
 
[5] May include a one digit prefix to indicate specific customer.
[6] 'C' prefix denotes chrome plated.
[31] (28) Code identifying: type of wheel and bearing
          381  - Phenolic - Delrin
          389  - Phenolic - roller
          371  - Phenolic - Delrin
          379  - Phenolic - roller
          451-2- Performer - Delrin
          459-2- Performer - roller
          661  - Moldon rubber - Delrin
          669  - Moldon rubber - roller
          671  - Moldon rubber - Delrin
          679  - Moldon rubber - roller
          951  - Polyurethane (hi-tech) - Delrin
          959  - Polyurethane (hi-tech) - roller
          971  - Moldon urethane - Delrin
          979  - Moldon urethane - roller
[32] (29) May have additional codes as necessary as follows:
          Seal: FSI food service industry
          Grease fork: GRF no grease, GRF2 double grease in fork,
                       GRF3 mid-temp 300° continuous              
          Washer: WSR3 sealed wheel
          Grease wheel: GRW1 no grease, GRW2 double grease in wheel,
                        GRW3 mid-temp 300° continuous

Albion Caster
  PCXB05051S-S54
  PCXB05051ST-S54

B-Line[33]
  B-(1)(2)(3)(4)(5)
 
[33] (1) Caster Type				
         S - Swivel				
         R - Rigid				
         T - Total Lock Brake				
     (2) Wheel Diameter				
         30 - 3"				
         35 - 3-1-/2"				
         40 - 4"				
         50 - 5"				
         60 - 6"				
         80 - 8"				
     (3) Wheel Type =3 letter combination 				
         TPR - Thermo-Rubber Flat
         TPU - Thermo-Urethane				
         POD - Polypropylene HD				
         GFN - Glass filled Nylon				
         XXX - 3 letter combination outlining other wheel options				
     (4) Fastening				
         T1 - T999 - Threaded 				
         P1 - P999 - Top Plate				
         G1 - G999 - Grip Ring				
         A1 - A999 - Expanding Adapters				
     (5) Brakes and other options to be added here, i.e. special colors, other customer
     requirements, etc.				
         B - B10 - Brake Options

D-Line[33]
  D-(1)(2)(3)(4)(5)
 
[33] (1) Caster Type				
         S - Swivel				
         R - Rigid				
         T - Total Lock Brake				
     (2) Wheel Diameter				
         30 - 3"				
         35 - 3-1-/2"				
         40 - 4"				
         50 - 5"				
         60 - 6"				
         80 - 8"				
     (3) Wheel Type =3 letter combination 				
         TPR - Thermo-Rubber Flat
         TPU - Thermo-Urethane				
         POD - Polypropylene HD				
         GFN - Glass filled Nylon				
         XXX - 3 letter combination outlining other wheel options				
     (4) Fastening				
         T1 - T999 - Threaded 				
         P1 - P999 - Top Plate				
         G1 - G999 - Grip Ring				
         A1 - A999 - Expanding Adapters				
     (5) Brakes and other options to be added here, i.e. special colors, other customer
     requirements, etc.				
         B - B10 - Brake Options

E Line Casters[34]
  E-(1)(2)(3)(4)(5)
 
[34] (1) Caster Type+CC54:F82				
         S - Swivel				
         R - Rigid				
         T - Total Lock Brake				
     (2) Wheel Diameter				
         4X2 - 4"				
         5X2 - 5"				    
         6X2 - 6"				
         8X2 - 8"				
     (3) Wheel Type - 3 letter combination				
         TPR - Thermo-Rubber Flat				
         TUM - Thermo-Urethane				
         POD - Polypropylene HD				
         GFN - Glass filled Nylon				
         TPD – Thermo Rubber Donut				
         PKT – PloyKat Thermo-Urethane				
         MOP – Mold-on Poly				
         XXX - 3 letter combination outlining other wheel options				
     (4) Fastening				
         No designation - standard 4” x 4-1/2” Top Plate				
         T1 - T999 - Threaded				
         P1 - P999 - Top Plate				
         G1 - G999 - Grip Ring				
         A1 - A999 - Expanding Adapters				
     (5) Brakes and other options to be added here, i.e. special colors, other customer 
         requirements, etc.				
         TBK  – Tread Lock Brake				
         CAMS – Short Pedal Cam Brake				
         CAML – Long Pedal Cam Brake				
         WFB  – Wheel Face Brake

Jarvis Caster
  (1)(2)(3)(4)(5)[35]
  (1)(2)(3)(4)(5)[39]
  (1)(2)(3)(4)(5)[37]
  (1)(2)(3)(4)(5)[38]
  (1)(2)(3)(4)(5)[36]
  (1)(2)(3)(4)(5)(6)[40]
 
[35] (1) Wheel Dia. - 2",2 1/2",3",4"
     (2) Series Number - 291-292
     (3) Wheel Type
     103 soft rubber,delrin bearing
     104 hard rubber,delrin bearing
     105 soft rubber,delrin bearing
     106 hard rubber,delrin bearing
     521 polyolefin,plain bearing
     522 polyolefin,roller bearing
     109 soft rubber,delrin bearing
     209 soft rubber,roller bearing
     110 hard rubber,delrin bearing
     210 hard rubber,roller bearing
     121 phenolic,plain bearing
     221 phenolic,roller bearing
     (4) Mounting Type - may be followed by Stem Type designation
     or Top Plate numbers 1,2 or 3
     291 swivel top plate
     292 rigid top plate
     (5) Optional Accessories - Side brakes on swivels (SB), Special Top Plate SP
[36] (1) Wheel Dia. - 2",2 1/2",3",3 1/2",4",5",6"
     (2) Series Number - 3A,30,31,32,33,34,35,36,37,38,40,50,51,54,305,315,325,335,345,355,
     365,375,405,30P,31P,34P,36P,50H,50MG,54H,54MG,56H,56MG,56MG3A,3S,36SATP,S30,S31,
     S32,S33,S34,S35,S36,S37,S40,S50MG,S54MG,S56MG,38R
     (3) Wheel Type
     105 soft rubber,delrin bearing
     105C soft rubber,conductive,plain bearing
     106 hard rubber,delrin bearing
     152 soft rubber,ball bearing
     162 hard rubber,ball bearing
     452 soft rubber,side plate,ball bearing
     452C soft rubber,conductive,side plate,ball bearing
     452G gray soft rubber,side plate,ball bearing
     462 hard rubber,side plate,ball bearing
     113 steel disc,rubber tire,ball bearing
     113G steel disc,gray rubber,ball bearing
     113P steel disc,polyurethane tire,ball bearing
     121 macerated, plain bearing
     500 soft rubber,donut side plate,ball bearing
     600 soft gray rubber,ball bearing
     314GD gray rubber donut,delrin bearing
     213GD gray rubber donut,ball bearing
     314GF gray rubber flat,delrin bearing
     213GF gray rubber flat,ball bearing
     213BF black rubber,flat,ball bearing
     314G gray polyurethane,delrin bearing
     314GF black rubber,flat,delrin bearing
     213G gray polyurethane,ball bearing
     213P blue polyurethane,ball bearing
     314P blue polyurethane, delrin bearing
     213MD,213MF light blue rubber,ball bearing,donut or flat
     314MD,314MF light blue rubber,delrin bearing,donut or flat
     314MD,314MF light blue rubber,delrin bearing,donut or flat
     213RTD,213RTF red rubber,hi-temp,ball bearing,donut or flat
     314RTD,314RTF red rubber,hi-temp,delrin bearing, donut or flat
     505 polyolefin,delrin bearing
     513 polyolefin,plain bearing
     514 polyolefin,ball bearing
     521 polyolefin,plain bearing
     521F polyolefin filled
     521HT polyolefin,hi-temp
     521NHT nylon,filled,hi-temp,plain bearing
     522 polyolefin,roller bearing
     522F polyolefin filled,roller bearing
     522HT polyolefin,hi-temp,roller bearing
     751 elastomer,delrin bearing
     750 elastomer,ball bearing
     755 elastomer,precision bearing
     (4) Mounting Type - may be followed by Stem Type designation
     or Top Plate numbers 1,2,3,4,5 or 7
     Swivel top plate 30,3A,30P,305,50,50H,50MG,S30,S50MG
     Rigid top plate 31,31P,315,51,S31
     Octagon swivel 32,325
     Octagon rigid 33,335
     Swivel spring ring 34,34P,345,54,54H,54MG,S34,S54MG
     Rigid spring ring 35,35P,355,55,S35
     Swivel threaded stem 36,36P,365,56,56H,56MG,S36,S56MG
     Rigid threaded stem 37,375,S37
     Pipe plug 38
     Swivel rubber applicator 40,405,S40
     Hollow kingpin 3S - 3/8 bushing
     (5) Optional Accessories - standard brake WB or BRK, posi-loc brake PL,
     swivel lock SLI, total lock APSL, grease seal G.S., zerk axle Z.A.,
     Special Top Plate SP, plain axle PA
     Note: S before series number - stainless steel caster, Type 304; 36SATP - adjustable
     top plate; 5 after series - nickel plate, R after series number indicates ridgid
     (6) Optional wheel colors - black on black B/B,black on gray B/G,red R,gray on black
     G/B
[37] (1) Wheel Dia. - 1 3/4",2 1/2",3",4",5",6",8",10"
     (2) Series Number - 130,131,134,135,136,138,138R,140,61,62
     (3) Wheel Type
     109 soft rubber,plain bearing
     110 hard rubber,plain bearing
     209 soft rubber,roller bearing
     210 hard rubber,roller bearing
     121 macerated,plain bearing
     121HT high temp - macerated, plain bearing
     221 macerated,roller bearing
     222 macerated,roller bearing
     521 polyolefin,plain bearing
     522 polyolefin,roller bearing
     531 polyolefin,plain bearing
     532 polyolefin,plain bearing
     215G gray polyurethane,roller bearing
     215P blue polyurethane,roller bearing
     315G gray polyurethane,delrin bearing
     315P blue polyurethane,delrin bearing
     215GF gray rubber,advantage,roller bearing
     315GF gray rubber,advantage,delrin bearing
     (4) Mounting Type - may be followed by Stem Type designation
     or Top Plate numbers 1,2,3,4,5 or 7
     Swivel top plate 130
     Rigid top plate 131
     Swivel spring ring 134
     Riged spring ring 135
     Swivel threaded stem 136
     Pipe plug 138
     Swivel rubber applicator 140
     (5) Optional Accessories - brake WB or BRK, swivel lock SLI, grease seal G.S., zerk
     axle Z.A., Special Top Plate SP,Plain axle PA
     Note: R after series number indicates ridgid
[38] (1) Wheel Dia. - 3",4",5",6",8"
     (2) Series Number - 81,82,71,72,41,45,47,84,84R,S71,S72,S81,S82
     (3) Wheel Type
     220G gray poly,roller bearing
     220P blue poly,roller bearing
     220MF blue rubber,ball bearing
     320G gray poly,delrin bearing
     320P blue poly,delrin bearing
     220GF gray rubber,advantage wheel,roller bearing
     220GFC gray rubber,conductive,roller bearing
     320GF gray rubber,advantage wheel,delrin bearing
     122 phenolic,plain bearing
     222 phenolic,roller bearing
     531 polyolefin,plain bearing
     531F polyolefin filled,plain bearing
     531HT hi-temp,plain bearing
     532 polyolefin,roller bearing
     532F polyolefin filled,roller bearing
     532HT polyolefin filled, hi-temp,roller bearing
     620 mold-on rubber,roller bearing
     720 mold-on poly,roller bearing
     721 mold-on poly,delrin bearing
     760 elastomer,roller bearing
     761 elastomer,delrin bearing
     770 elastomer,precision bearing
     600 hi-modulus donut,ball bearing
     601 hi-modulus donut,delrin bearing
     220GD gray rubber,advantage,donut,ball bearing
     220GDB gray rubber,advantage,donut,ball bearing
     320GD gray rubber,advantage,donut,delrin bearing
     (4) Mounting Type - may be followed by Stem Type designation
     or Top Plate numbers 1,2,3 or 4
     Swivel top plate 81,71,S71,S81
     3 3/4 x 4 1/2
     Rigid top plate 82,72,S72,S82
     3 3/4 x 4 1/2
     Swivel stem 41,45,47,84,S74
     Rigid stem 84R
     (5) Optional Accessories - side brake SB, wheel brake WB or BRK, posi-loc brake PL,
     swivel lock SL, total lock APSL, grease seal G.S., zerk axle Z.A., Special Top
     Plate SP, Plain axle PA
     Note: S before series number - stainless steel caster, Type 304.
[39] (1) Wheel Dia. - 2",2 1/2",3"
     (2) Series Number - L-2,L-3,L-4,L-9,L-10
     (3) Wheel Type
     101 solid soft rubber
     201G gray rubber on polyolefin core
     501 solid polyolefin
     (4) Mounting Type - may be followed by Stem Type designation
     or Top Plate numbers 1,2 or 3
     L-2 straight stem - swivel
     L-3 spring ring stem - swivel
     L-4 thread stem - swivel
     L-9 top plate - swivel
     L-10 top plate rigid
     (5) Optional Accessories - side brake SB, Special Top Plate SP
[40] (1) Wheel Dia. - 2 1/2",3",4",5"
     (2) Series Number - 13,13P,14,14P,17,19,25,25P,26,26P,27,28,135,145,
     255,265,275,W13,W14,W17,W19,W25,W28
     (3) Wheel Type
     103 soft rubber,delrin bearing
     103C soft rubber conductive,plain bearing
     103G soft rubber,gray rubber
     104 hard rubber,delrin bearing
     132 soft rubber,ball bearing
     301 soft rubber, polyolefin core, plain bearing
     433 soft rubber,donut side plate, delrin bearing
     433G gray rubber,side plate, delrin bearing
     211G gray polyurethane,delrin bearing
     212G gray polyurethane,ball bearing
     212P blue polyurethane,ball bearing
     201G gray soft rubber,polyolefin core, plain bearing
     511 polyolefin,plain bearing
     521 polyolefin,plain bearing
     (4) Mounting Type - may be followed by Stem Type designation
     or Top Plate numbers 1,2,3 or 4
     Thread stem 13,W13,135,13P - swivel
     Sping ring 14,W14,145,14P - swivel
     Pipe plug 17,W17 - swivel
     Octagon swivel 19,W19 - swivel
     Top plate 25,W25,255,25P - swivel
     Top plate 26,265,26P - rigid
     Rubber app 27,W27,275 - swivel
     Hollow kingpin 28,W28 - 3/8 bushing - swivel
     (5) Optional Accessories - side brake SB, verti-loc brake WB or BRK, grease
     seal G.S.5 after series number - nickel plate, Special Top Plate SP
     (6) Optional wheel colors - R (red)

MedCaster Brand[41] [42]
  (1)(2)(3)125(4)(5)
 
[41] (1) Series Name NG, NS, NA, NI, NM, NT, NQ, NW, ND, NK, NL, NR				
     (2) Wheel Diameter (inches) 03, 04, 05, 06 				
     (3) Wheel Tyopes: 
         QDP - Elastomeric Rubber Flat profile w/Precision Bearing
         RPP - Santopreme Crowned tread (5"only)w/Precision Bearing
         QRP - Elastomeric Rubber Crowned profile (5" only)w/Precision Bearing
         QDO - Elastomeric Rubber Flat profile w/ Delrin Bearing
         PMP - Performa Rubber Flat Profile w/Precision Bearing Tan Color
         QKP - Elastomeric Rubber Flat profile w/Precision Bearing  (Black/Black)
         QBP - Elastomeric Rubber Flat profile w/Precision Bearing  (Black/Gray)
         AMP - Antimicrobial Elastomeric Rubber Flat profile w/Precision Bearing
     (4) Caster Configurations: 
         TL - Total Lock
         SW - Swivel Only
         RG - Rigid
         RB - Rigid with Brake
         DL - Directional Lock
         RS - Rigid Made from Swivel (4" only)
     (5) Mounting Types: 
         HK01 - Assembled Hollow kingpin 1/2" hole
         HK04 - Assembled Hollow kingpin 3/8" hole 
         HKU1 - Unassembled Hollow kingpin 1/2" hole
         HKU4 - Unassembled Hollow kingpin 3/8" hole 
         HT   - Hollow Threaded (03,01)
         TS   - Threaded Stem, (01, 02, 03, 04, 05, 06, 07, 11, 12, 13, 14, 15, 16, 19, 20, 
         21, 22, 21S, 22S, 23, 30, 34, 37, 50)
         TSU  - Threaded Stem unassembled (U1,U2,U3,U4,U5,U6,U7)
         GR   - Grip Ring Stem (S1, 01, S2, 02, 03, 04, 05, 06, 07, 08, 09, 10, 11, 12, 16)
         RS   - Round Stem (01, 02, 03, 04, 05, 06, 07, 08, 09, 10)
         SQ   - Square Stem (01, 02, 03, 04)
         TP   - Top Plate (01, 04, 08, 11, 13, S1)
         XRN, XRR, XRZ, XSZ1 - Expanding Adapter Stems (01, 02, 03, 04, 05, 06, 07, 08)
     
     
[42] Not tested by NSF for efficacy at limiting the spread of bacteria.			


Facility : Chino, CA


COMPONENTS:

B-Line[1]
  B-(1)(2)(3)(4)(5)
 
[1] (1) Caster Type				
        S - Swivel				
        R - Rigid				
        T - Total Lock Brake				
    (2) Wheel Diameter				
        30 - 3"				
        35 - 3-1-/2"				
        40 - 4"				
        50 - 5"				
        60 - 6"				
        80 - 8"				
    (3) Wheel Type - 3 letter combination 				
        TPR  - Thermo-Rubber Flat				
        TPU  - Thermo-Urethane				
        POD  - Polypropylene HD				
        GFN  - Glass filled Nylon				
        XXX  - 3 letter combination outlining other wheel options				
    (4) Fastening				
        T1 - T999 - Threaded 				
        P1 - P999 - Top Plate				
        G1 - G999 - Grip Ring				
        A1 - A999 - Expanding Adapters				
    (5) Brakes and other options to be added here, i.e. special colors, other customer 
        requirements, etc.				
        B - B10 - Brake Options

D-Line[1]
  D-(1)(2)(3)(4)(5)
 
[1] (1) Caster Type				
        S - Swivel				
        R - Rigid				
        T - Total Lock Brake				
    (2) Wheel Diameter				
        30 - 3"				
        35 - 3-1-/2"				
        40 - 4"				
        50 - 5"				
        60 - 6"				
        80 - 8"				
    (3) Wheel Type - 3 letter combination 				
        TPR  - Thermo-Rubber Flat				
        TPU  - Thermo-Urethane				
        POD  - Polypropylene HD				
        GFN  - Glass filled Nylon				
        XXX  - 3 letter combination outlining other wheel options				
    (4) Fastening				
        T1 - T999 - Threaded 				
        P1 - P999 - Top Plate				
        G1 - G999 - Grip Ring				
        A1 - A999 - Expanding Adapters				
    (5) Brakes and other options to be added here, i.e. special colors, other customer 
        requirements, etc.				
        B - B10 - Brake Options

E Line Casters[2]
  E-(1)(2)(3)(4)(5)
 
[2] (1) Caster Type+CC54:F82				
        S - Swivel				
        R - Rigid				
        T - Total Lock Brake				
    (2) Wheel Diameter				
        4X2 - 4"				
        5X2 - 5"				    
        6X2 - 6"				
        8X2 - 8"				
    (3) Wheel Type - 3 letter combination				
        TPR - Thermo-Rubber Flat				
        TUM - Thermo-Urethane				
        POD - Polypropylene HD				
        GFN - Glass filled Nylon				
        TPD – Thermo Rubber Donut				
        PKT – PloyKat Thermo-Urethane				
        MOP – Mold-on Poly				
        XXX - 3 letter combination outlining other wheel options				
    (4) Fastening				
        No designation - standard 4” x 4-1/2” Top Plate				
        T1 - T999 - Threaded				
        P1 - P999 - Top Plate				
        G1 - G999 - Grip Ring				
        A1 - A999 - Expanding Adapters				
    (5) Brakes and other options to be added here, i.e. special colors, other customer 
        requirements, etc.				
        TBK  – Tread Lock Brake				
        CAMS – Short Pedal Cam Brake				
        CAML – Long Pedal Cam Brake				
        WFB  – Wheel Face Brake

Jarvis Caster
  (1)(2)(3)(4)(5)[7]
  (1)(2)(3)(4)(5)[4]
  (1)(2)(3)(4)(5)[3]
  (1)(2)(3)(4)(5)[6]
  (1)(2)(3)(4)(5)[5]
  (1)(2)(3)(4)(5)(6)[8]
 
[3] (1) Wheel Dia. - 2",2 1/2",3",4"
    (2) Series Number - 291-292
    (3) Wheel Type
        103 soft rubber,delrin bearing
        104 hard rubber,delrin bearing
        105 soft rubber,delrin bearing
        106 hard rubber,delrin bearing
        521 polyolefin,plain bearing
        522 polyolefin,roller bearing
        109 soft rubber,delrin bearing
        209 soft rubber,roller bearing
        110 hard rubber,delrin bearing
        210 hard rubber,roller bearing
        121 phenolic,plain bearing
        221 phenolic,roller bearing
    (4) Mounting Type - may be followed by Stem Type designation
        or Top Plate numbers 1,2 or 3
        291 swivel top plate
        292 rigid top plate
    (5) Optional Accessories - Side brakes on swivels (SB), Special Top Plate SP
[4] (1) Wheel Dia. - 2",2 1/2",3",3 1/2",4",5",6"
    (2) Series Number - 3A,30,31,32,33,34,35,36,37,38,40,50,51,54,305,315,325,335,345,355,
        365,375,405,30P,31P,34P,36P,50H,50MG,54H,54MG,56H,56MG,56MG3A,3S,36SATP,S30,S31,
        S32,S33,S34,S35,S36,S37,S40,S50MG,S54MG,S56MG,38R
    (3) Wheel Type
        105 soft rubber,delrin bearing
        105C soft rubber,conductive, plain bearing
        106 hard rubber,delrin bearing
        152 soft rubber,ball bearing
        162 hard rubber,ball bearing
        452 soft rubber,side plate,ball bearing
        452C soft rubber,conductive,side plate,ball bearing
        452G gray soft rubber,side plate,ball bearing
        462 hard rubber,side plate,ball bearing
        113 steel disc,rubber tire,ball bearing
        113G steel disc,gray rubber,ball bearing
        113P steel disc,polyurethane tire,ball bearing
        121 macerated,plain bearing
        500 soft rubber,donut side plate,ball bearing
        600 soft gray rubber,ball bearing
        314GD gray rubber donut,delrin bearing
        213GD gray rubber donut,ball bearing
        314GF gray rubber flat,delrin bearing
        213GF gray rubber flat,ball bearing
        213BF black rubber,flat,ball bearing
        314G gray polyurethane,delrin bearing
        314BF black rubber,flat,delrin bearing
        213G gray polyurethane,ball bearing
        213P blue polyurethane,ball bearing
        314P blue polyurethane,delrin bearing
        213MD,213MF light blue rubber,ball bearing,donut or flat
        314MD,314MF light blue,delrin bearing,bonut or flat
        213RTD,213RTF red rubber,hi-temp,ball bearing,donut or flat
        314RTD,314RTF red rubber,hi-temp,delring bearing,donut or flat
        513 polyolefin,plain bearing
        514 polyolefin,ball bearing
        521 polyolefin,plain bearing
        521F polyolefin filled
        521HT polyolefin,hi-temp
        521NHT nylon,filled,hi-temp,plain bearing
        522 polyolefin,roller bearing
        522F polyolefin filled,roller bearing
        522HT polyolefin,hi-temp,roller bearing
        751 elastomer,delrin bearing
        750 elastomer,ball bearing
        755 elastomer,precision bearing
    (4) Mounting Type - may be followed by Stem Type designation
        or Top Plate numbers 1,2,3,4,5, or 7
        Swivel top plate 30,3A,30P,305,50,50H,50MG,S30,S50MG
        Rigid top plate 31,31P,315,51,S31
        Octagon swivel 32,325
        Octagon rigid 33,335
        Swivel spring ring 34,34P,345,54,54H,54MG,S34,S54MG
        Rigid spring ring 35,35P,355,55,S35
        Swivel threaded stem 36,36P,365,56,56H,56MG,S36,S56MG
        Rigid threaded stem 37,375,S37
        Pipe plug 38
        Swivel rubber applicator 40,405,S40
        Hollow kingpin 3S - 3/8 bushing
    (5) Optional Accessories - standard brake WB or BRK, posi-loc brake PL, swivel
        lock SLI, total lock APSL, grease seal G.S., zerk axle Z.A., Special Top Plate SP,
        plain axle PA
    (6) Optional wheel colors - black on black B/B, black on gray B/G, red R, gray on
        black G/B
    Note: S before series number - stainless steel caster, Type 304; 36SATP - adjustable
    top plate; 5 after series - nickel plate.
[5] (1) Wheel Dia. - 2 1/2",3",4",5",6",8",10"
    (2) Series Number - 130,131,134,135,136,138,138R,140,61,62
    (3) Wheel Type
        109 soft rubber,plain bearing
        110 hard rubber,plain bearing
        209 soft rubber,roller bearing
        210 hard rubber,roller bearing
        121 macerated,plain bearing
        221 macerated,roller bearing
        222 macerated,roller bearing
        521 polyolefin,plain bearing
        522 polyolefin,roller bearing
        531 polyolefin,plain bearing
        532 polyolefin,plain bearing
        215G gray polyurethane,roller bearing
        215P blue polyurethane,roller bearing
        315G gray polyurethane,delrin bearing
        315P blue polyurethane,delrin bearing
        215GF gray rubber,advantage,roller bearing
        315GF gray rubber,advantage,delrin bearing
    (4) Mounting Type - may be followed by Stem Type designation
        or Top Plate numbers 1,2,3,4,5 or 7
        Swivel top plate 130
        Rigid top plate 131
        Swivel spring ring 134
        Ridged spring ring 135
        Swivel threaded stem 136
        Pipe plug 138
        Swivel rubber applicator 140
    (5) Optional Accessories - brake WB or BRK, swivel lock SLI, grease seal G.S., zerk
        axle
        Z.A., Special Top Plate SP, plain axle PA
    Note: R after series indicates ridged
[6] (1) Wheel Dia. - 3",4",5",6",8"
    (2) Series Number - 81,82,71,72,41,45,47,84,84R,S71,S72,S81,S82
    (3) Wheel Type
        220G gray poly,roller bearing
        220P blue poly,roller bearing
        220MF blue rubber,ball bearing
        320G gray poly,delrin bearing
        320P blue poly,delrin bearing
        220GF gray rubber,advantage wheel,roller bearing
        220GFC gray rubber,conductive,roller bearing
        320GF gray rubber,advantage wheel,delrin bearing
        122 phenolic,plain bearing
        222 phenolic,roller bearing
        531 polyolefin,plain bearing
        531F polyolefin filled,plain bearing
        531HT hi-temp,plain bearing
        532 polyolefin,roller bearing
        532F polyolefin filled,roller bearing
        532HT polyolefin filled, hi-temp,roller bearing
        620 mold-on rubber,roller bearing
        720 mold-on poly,roller bearing
        721 mold-on poly,delrin bearing
        760 elastomer,roller bearing
        761 elastomer,delrin bearing
        770 elastomer,precision bearing
        600 hi-modulus donut,ball bearing
        601 hi-modulus donut,delrin bearing
        220GD gray rubber,advantage,donut,ball bearing
        320GD gray rubber,advantage,donut,delrin bearing
    (4) Mounting Type - may be followed by Stem Type designation
        or Top Plate numbers 1,2 or 3
        Swivel top plate 81,71,S71,S81
        3 3/4 x 4 1/2
        Rigid top plate 82,72,S72,S82
        3 3/4 x 4 1/2
        Swivel stem 41,45,47,84,S74
        Rigid stem 84R
    (5) Optional Accessories - side brake SB, wheel brake WB or BRK, posi-loc brake PL,
        swivel lock SL, total lock APSL, grease seal G.S., zerk axle Z.A., Special Top
        Plate SP, Plain axle PA
    Note: S before series number - stainless steel caster, Type 304.
[7] (1) Wheel Dia. - 2",2 1/2",3"
    (2) Series Number - L-2,L-3,L-4,L-9,L-10
    (3) Wheel Type
        101 solid soft rubber
        201G gray rubber on polyolefin core
        501 solid polyolefin
    (4) Mounting Type - may be followed by Stem Type designation
        or Top Plate numbers 1,2 or 3
        L-2 straight stem - swivel
        L-3 spring ring stem - swivel
        L-4 thread stem - swivel
        L-9 top plate - swivel
        L-10 top plate rigid
    (5) Optional Accessories - side brake SB, Special Top Plate SP
[8] (1) Wheel Dia. - 2 1/2",3",4",5"
    (2) Series Number - 13,14,17,19,25,26,27,28,13P,14P,25P,26P,135,145,
        255,265,275, W13,W14,W17,W19,W25,W28
    (3) Wheel Type
        103 soft rubber,delrin bearing
        103C soft rubber conductive,plain bearing
        103G soft rubber,gray rubber
        104 hard rubber,delrin bearing
        132 soft rubber,ball bearing
        301 soft rubber,polyolenfin core, plain bearing
        433 soft rubber,donut side plate, delrin bearing
        433G gray rubber,side plate, delrin bearing
        211G gray polyurethane,delrin bearing
        212G gray polyurethane,ball bearing
        212P blue polyurethane,ball bearing
        201G gray soft rubber,polyolefin core, plain bearing
        511 polyolefin,plain bearing
    (4) Mounting Type - may be followed by Stem Type designation
        or Top Plate numbers 1,2,3,or 4
        Thread stem 13,W13,135,13P - swivel
        Sping ring 14,W14,145,14P - swivel
        Pipe plug 17,W17 - swivel
        Octagon swivel 19,W19 - swivel
        Top plate 25,W25,255,25P - swivel
        Top plate 26,265,26P - rigid
        Rubber app 27,W27,275 - swivel
        Hollow Kingpin,28,W28 - 3/8 bushing - swivel
    (5) Optional Accessories - side brake SB, verti-loc brake WB or BRK, grease seal G.S.
        5 after series number - nickel plate, Special Top Plate SP
    (6) Optional wheel colors - R (red)


Facility : Albion, MI


COMPONENTS:

Albion Caster[1]
  (1)-PB-(2)(3) 01 (4)N
  (1)-PB-(2)(3) 41 (4)N
  (1)-RR-(2)(3) 01 (4)N
  (1)-TM-(2)(3) 01 (4)N
  (1)-TM-(2)(3) 41 (4)N
  (1)-TS-(2)(3) 01 (4)N
  (1)-XA-(2)(3) 01 (4)N
  (1)-XA-(2)(3) 51 (4)N
  (1)-XC-(2)(3) 01 (4)N
  (1)-XC-(2)(3) 02 (4)N
  (1)-XC-(2)(3) 52 (4)N
  (1)-XE-(2)(3) 01 (4)N
  (1)-XE-(2)(3) 51 (4)N
  50-TS-(2)(3) 01 (4)N
  51-TS-(2)(3) 01 (4)N
  53-TS-(2)(3) 01 (4)N
  54-TS-(2)(3) 01 (4)N
 
[1] (1) Series number
    (2) Size of wheel in inches
    (3) Wheel width designation
    (4) R - Rigid, S - Swivel

B-Line[2]
  B-(1)(2)(3)(4)(5)
 
[2] (1) Caster Type				
        S - Swivel				
        R - Rigid				
        T - Total Lock Brake				
    (2) Wheel Diameter				
        30 - 3"				
        35 - 3-1-/2"				
        40 - 4"				
        50 - 5"				
        60 - 6"				
        80 - 8"				
    (3) Wheel Type =3 letter combination 				
        TPR - Thermo-Rubber Flat
        TPU - Thermo-Urethane				
        POD - Polypropylene HD				
        GFN - Glass filled Nylon				
        XXX - 3 letter combination outlining other wheel options				
    (4) Fastening				
        T1 - T999 - Threaded 				
        P1 - P999 - Top Plate				
        G1 - G999 - Grip Ring				
        A1 - A999 - Expanding Adapters				
    (5) Brakes and other options to be added here, i.e. special colors, other customer
    requirements, etc.				
        B - B10 - Brake Options

D-Line[2]
  D-(1)(2)(3)(4)(5)
 
[2] (1) Caster Type				
        S - Swivel				
        R - Rigid				
        T - Total Lock Brake				
    (2) Wheel Diameter				
        30 - 3"				
        35 - 3-1-/2"				
        40 - 4"				
        50 - 5"				
        60 - 6"				
        80 - 8"				
    (3) Wheel Type =3 letter combination 				
        TPR - Thermo-Rubber Flat
        TPU - Thermo-Urethane				
        POD - Polypropylene HD				
        GFN - Glass filled Nylon				
        XXX - 3 letter combination outlining other wheel options				
    (4) Fastening				
        T1 - T999 - Threaded 				
        P1 - P999 - Top Plate				
        G1 - G999 - Grip Ring				
        A1 - A999 - Expanding Adapters				
    (5) Brakes and other options to be added here, i.e. special colors, other customer
    requirements, etc.				
        B - B10 - Brake Options

E Line Casters[3]
  E-(1)(2)(3)(4)(5)
 
[3] (1) Caster Type+CC54:F82				
        S - Swivel				
        R - Rigid				
        T - Total Lock Brake				
    (2) Wheel Diameter				
        4X2 - 4"				
        5X2 - 5"				    
        6X2 - 6"				
        8X2 - 8"				
    (3) Wheel Type - 3 letter combination				
        TPR - Thermo-Rubber Flat				
        TUM - Thermo-Urethane				
        POD - Polypropylene HD				
        GFN - Glass filled Nylon				
        TPD – Thermo Rubber Donut				
        PKT – PloyKat Thermo-Urethane				
        MOP – Mold-on Poly				
        XXX - 3 letter combination outlining other wheel options				
    (4) Fastening				
        No designation - standard 4” x 4-1/2” Top Plate				
        T1 - T999 - Threaded				
        P1 - P999 - Top Plate				
        G1 - G999 - Grip Ring				
        A1 - A999 - Expanding Adapters				
    (5) Brakes and other options to be added here, i.e. special colors, other customer 
        requirements, etc.				
        TBK  – Tread Lock Brake				
        CAMS – Short Pedal Cam Brake				
        CAML – Long Pedal Cam Brake				
        WFB  – Wheel Face Brake


Facility : St. Joseph, MI


COMPONENTS:

B-Line[1]
  B-(1)(2)(3)(4)(5)
 
[1] (1) Caster Type				
        S - Swivel				
        R - Rigid				
        T - Total Lock Brake				
    (2) Wheel Diameter				
        30 - 3"				
        35 - 3-1-/2"				
        40 - 4"				
        50 - 5"				
        60 - 6"				
        80 - 8"				
    (3) Wheel Type -3 letter combination 				
        TPR - Thermo-Rubber Flat				
        TPU - Thermo-Urethane				
        POD - Polypropylene HD				
        GFN - Glass filled Nylon				
        XXX - 3 letter combination outlining other wheel options				
    (4) Fastening				
        T1 - T999 - Threaded 				
        P1 - P999 - Top Plate				
        G1 - G999 - Grip Ring				
        A1 - A999 - Expanding Adapters				
    (5) Brakes and other options to be added here, i.e. special colors, other customer 
        requirements, etc.				
        B - B10 - Brake Options

D-Line[1]
  D-(1)(2)(3)(4)(5)
 
[1] (1) Caster Type				
        S - Swivel				
        R - Rigid				
        T - Total Lock Brake				
    (2) Wheel Diameter				
        30 - 3"				
        35 - 3-1-/2"				
        40 - 4"				
        50 - 5"				
        60 - 6"				
        80 - 8"				
    (3) Wheel Type -3 letter combination 				
        TPR - Thermo-Rubber Flat				
        TPU - Thermo-Urethane				
        POD - Polypropylene HD				
        GFN - Glass filled Nylon				
        XXX - 3 letter combination outlining other wheel options				
    (4) Fastening				
        T1 - T999 - Threaded 				
        P1 - P999 - Top Plate				
        G1 - G999 - Grip Ring				
        A1 - A999 - Expanding Adapters				
    (5) Brakes and other options to be added here, i.e. special colors, other customer 
        requirements, etc.				
        B - B10 - Brake Options

E Line Casters[2]
  E-(1)(2)(3)(4)(5)
 
[2] (1) Caster Type+CC54:F82				
        S - Swivel				
        R - Rigid				
        T - Total Lock Brake
        SSES - Swivel
        SSER - Rigid				
    (2) Wheel Diameter				
        4X2 - 4"				
        5X2 - 5"				    
        6X2 - 6"				
        8X2 - 8"				
    (3) Wheel Type - 3 letter combination				
        TPR - Thermo-Rubber Flat				
        TUM - Thermo-Urethane				
        POD - Polypropylene HD				
        HRT - Hi Temp Glass filled Nylon				
        TPD – Thermo Rubber Donut
        KWL – Solid Polyurethane
        WNY – White Nylon
        RET – Hi Temp Glass Filled Polypropylene	
        MAX – Glass Filled Nylon			
        XXX - 3 letter combination outlining other wheel options				
    (4) Fastening				
        No designation - standard 4” x 4-1/2” Top Plate				
        T1 - T999 - Threaded				
        P1 - P999 - Top Plate				
        G1 - G999 - Grip Ring				
        A1 - A999 - Expanding Adapters				
    (5) Brakes and other options to be added here, i.e. special colors, other customer 
        requirements, etc.				
        TBK  – Tread Lock Brake				
        CAMS – Short Pedal Cam Brake				
        CAML – Long Pedal Cam Brake				
        WFB  – Wheel Face Brake

Shepherd Caster
  100 Series Caster[3] [4] [5]
  1400 Series Caster[3] [4] [6]
  3400 Series Caster[3] [4] [6]
  400 Series Caster[3] [4] [7]
  4700 Series Caster[3] [4] [7]
  500 Series Caster[3] [4] [5]
  6700 Series Caster[3] [4] [6]
  7700 Series Caster[3] [4] [7]
  8 Series[3] [4] [8]
  87 Series[3] [4] [8]
  9159R
  A400 Series Caster[3] [4] [7]
  A4700 Series Caster[3] [4] [7]
  A8 Series[3] [4] [8]
  A87 Series[3] [4] [8]
  B4700 Series Caster[3] [4] [7]
  B87 Series[3] [4] [8]
  BLS23171TZ-GFN51(KK)
  BLS23171TZ-GFN51(KK)TB
  C(1)(2)(3)(4)(5)(6)(7)[9]
  D400 Series Caster[3] [4] [7]
  D4700 Series Caster[3] [4] [7]
  D8 Series[3] [4] [8]
  D87 Series[3] [4] [8]
  EK400 Series Caster[3] [4] [7]
  EK8 Series[3] [4] [8]
  EP Series Caster[10] [11]
  EP400 Series Caster[3] [4] [7]
  EP8 Series[3] [4] [8]
  ER Series Caster[10] [11]
  ER400 Series Caster[3] [4] [7]
  ER8 Series[3] [4] [8]
  EW Series Caster[10] [11]
  EW Series Caster[10] [11]
  EW400 Series Caster[3] [4] [7]
  EW400 Series Caster[3] [4] [7]
  EW8 Series[3] [4] [8]
  EW8 Series[3] [4] [8]
  EX Series Caster[10] [11]
  EY Series Caster[10] [11]
  G400 Series Caster[3] [4] [7]
  G4700 Series Caster[3] [4] [7]
  G8 Series[3] [4] [8]
  G87 Series[3] [4] [8]
  K400 Series Caster[3] [4] [7]
  K8 Series[3] [4] [8]
  PAD(20)(22)(23)(24)[12] [13]
  PAT(20)(21)(23)(24)[12] [13]
  PGD (7)(8)(9)(10)(11)(12)(13)(14)[14]
  PGR(7)(8)(9)(10)(11)(12)(13)(14)[14]
  PGS(7)(8)(9)(10)(11)(12)(13)(14)[14]
  PGT(7)(8)(9)(10)(11)(12)(13)(14)[14]
  PRE(1)(2)(3)(4)(5)(6)[15]
  PRI(1)(2)(3)(4)(5)(6)[15]
  PRQ(15)(16)(17)(18)[16] [17]
  PSQ(15)(16)(17)(18)(19)[16] [17]
  RIG MCD (25)(26)(27)(28)(29)(30)(31) - Directional Lock[14] [18]
  RIG MCR (25)(26)(27)(28)(29)(30)(31) - Rigid[14] [18]
  RIG MCS (25)(26)(27)(28)(29)(30)(31)[14] [18]
  RP Series Caster[10] [11]
  U400 Series Caster[3] [4] [7]
  U8 Series[3] [4] [8]
  W400 Series Caster[3] [4] [7]
  W8 Series[3] [4] [8]
 
[3] Wheel Type
    17 - Rubber Tired - Ball Bearing
    21 - Rubberex - Self Lubricating
    22 - Rubberex - Ball Bearing
    23 - Rubberex - Roller Bearing
    27 - Rockite (Hard Rubber) - Self Lubricating
    29 - Rockite - Roller Bearing
    30 - Plaskite - With Bushing
    31 - Plaskite - Roller Bearing
    40 - K-Wheel (Solid Polyurethane) - Delrin Bearing
    41 - K-Wheel (Roller Bearing)
    60 - Polyflex (Solid Polypropylene) - Plain Bearing
    61 - Polyflex - Roller Bearing
    64 - Glass-filled Polypropylene (Waffle Design) - Delrin Bearing
    65 - Glass-filled Polypropylene (Waffle Design) - Roller Bearing
    66 - Glass-Filled Polypropolene (Waffle Design) - Presision Bearing
    90 - Thermoplastic Rubber Tread on P/P Core - Delrin Bearing
    91 - Thermoplastic Rubber Tread on P/P Core - Roller Bearing
    92 - Thermoplastic Rubber Tread on P/P Core - Ball Bearing
    93 - Thermoplastic Rubber Tread on P/P Core - Precision Bearing
    96 - Polyurethane Tread on P/P Core - Delrin Bearing
    97 - Polyurethane Tread on P/P Core - Ball Bearing
    98 - Polyurethane Tread on P/P Core - Roller Bearing
    99 - Polyurethane Tread on P/P Core - Precision Bearing
[4] With or without suffix:
    R - Riveted Wheel Construction
    RB - Roll-Lock Brake - Tread Brake
    SB - Side Brake
    SS - Stainless Steel
    TB - Total Brake Lock
    WFB - Wheel Face Brake
[5] Wheel Size
    2 - 2" Diameter
    2 1/2 - 2.5" Diameter
    3 - 3" Diameter
    4 - 4" Diameter
[6] Wheel Size
    4 - 4" Diameter
    5 - 5" Diameter
    6 - 6" Diameter
    8 - 8" Diameter
[7] Wheel Size
    2 1/2 - 2.5" Diameter
    3 - 3" Diameter
    3 1/2 - 3.5" Diameter
    4 - 4" Diameter
    5 - 5" Diameter
    6 - 6" Diameter
[8] Wheel Size
    3 - 3" Diameter
    3 1/2 - 3.5" Diameter
    4 - 4" Diameter
    5 - 5" Diameter
[9] C - Caster
    (1) Series - 00 (POL wheel only), 08, 68, H08, H68, S08, S68
    (2) Wheel Diameter - 1, 2, 3, 4, 5, 6, 9, 16, 23, 24, 25, 26, 35
    (3) Mounting options: 02 through 900 for attachment method
    (4) Finish:
        BC - Bright chrome
        BO - Black oxide
        PN - Polished nickel
        ZN – Zinc
        TZ – Trivalent Zinc(ROHS)
    (5) Wheel type/material
        3E - Dished polyolefin
        3ES - Solid polyolefin
        3H - Hard rubber
        3R - Soft rubber
        TPR - Thermoplastic rubber
        TPU - Thermoplastic urethane
        MNT - Monoprene
        POL – Polyolefin log
    (6) Bearing: 0 - Plain bore, 1 - Delrin, 2 - Ball bearing
    (7) Brake options: Blank - No brake, TB - Tread brake. Top lock break
[10] (1) Wheel Type
         1 - Thermoplastic rubber tread on polypropylene core
         2 - Phenolic
         4 - Rubberex
         6 - Polypropylene
         7 - Rockite
         9 - Polyurethane tread on polypropylene core
     (2) Finish
         2 - Black oxide (black iron oxide)
         3 - Nickel
         5 - Zinc
         8 - Chrome
     (3) Wheel Size
         9 - 2" Diameter
         11 - 2 1/2" Diameter
         20 - 3" Diameter
         21 - 4" Diameter
         22 - 5" Diameter
[11] With or without suffix:
     R - Riveted Wheel Construction
     RB - Rollock Brake (Tread Brake)
     SB - Side Brake
     WFB - Wheel Face Brake
[12] (20) Wheel size: 5"
     (21) Total lock top plate models
     (22) Directional lock top plate models
     (23) Wheel type: Monotech donut, monotech flat, soft rubber, TPR ball bearing,
          TPU - Thermoplastic urethane
     (24) Plating: Zinc
[13] NSF Listed production beginning with date code 12-18-2007.
[14] NSF Listed production beginning with date code August 2011.
[15] (1) Wheel size: 16 - 1 5/8", 20 - 2", 25 - 2 1/2", 30 - 3", 40 - 4", 50 - 5"
     (2) Fastening: 02 through 900 for attachment method
     (3) Finish: BC - Bright chrome, BO - Black oxide, PN - Polished nickel, ZN - Zinc
     (4) Wheel type:
         3E - Dished polyolefin
         3ES - Solid polyolefin
         3H - Hard rubber
         3R - Soft rubber
         TPR - Thermoplastic rubber
         TPU - Thermoplastic urethane
         MNT - Monoprene
     (5) Wheel color: Blank - Black, GR/GR - Grey on grey
     (6) Brake options: B - Side brake, TB - Tread brake, TL - Top lock
[16] (15) Wheel size: 20 - 2", 25 - 2.5", 30 - 3", 40 - 4"
     (16) Wheel type: Hard rubber, soft rubber, polyolefin
     (17) Plating type: Clear zinc or nickel
     (18) Friction brake optional.
     (19) Polyolefin 2" and 4" wheels are not NSF Certified.
[17] NSF Listed production beginning with date code 11-12-2007.
[18] (25) Size:
          30 - 3"
          40 - 4"
          50 - 5"
          60 - 6"
     (26) Fastening: 145 through 900 for attachment method
     (27) Finish:
          BC - Bright chrome
          SS - Stainless steel
          TZ- Zinc
     (28) Wheel Type:
          3E - Dished polyolefin
          DMT - Donut monotech
          FMT - Flat monotech
          HDR - Hard rubber
          SFR - Soft rubber
          TPR - Thermoplastic rubber
          TPU - Urethane
     (29) Bearing:
          0 - Plain Boar
          1 - Delrin
          2 - Ball Bearing
          3 - Precision Bearing
     (30) Thread Guard:
          1 - None
          2 - Partial
          3 - Full
     (31) Wheel Color:
          BG - Blue on Grey
          GG - Grey on Grey
          KK - Black


Facility : St. Joseph, MI


COMPONENTS:

1 Series Casters[1] [2] [3] [4] [5] [6]
  1.(1)(2).(3).(4)
  11.(1)(2).(3).(4)
 
[1] (1) 2 or 3 digit numbers identifying: wheel diameter and capacity - max
        016 - 1 5/8" light duty - 75 lbs.
        022 - 2" light duty - 75 lbs.
        030 - 3" light duty - 75 lbs.
        033 - 3" medium light duty - 125 lbs.
        043 - 4" medium light duty - 135 lbs.
        053 - 5" medium light duty - 145 lbs.
        16  - 1 5/8" light duty - 75 lbs.
        22  - 2" light duty - 75 lbs.
        30  - 3" light duty - 75 lbs.
        33  - 3" medium light duty - 125 lbs.
        43  - 4" medium light duty - 135 lbs.
        53  - 4" medium light duty - 145 lbs.
[2] (2) 2 digit number identifying: caster type and mounting
        06 - Single ball swivel
        08 - Rigid top plate - medium light duty
        10 - Rigid top plate - light duty
        51 - Swivel grip ring stem
        52 - Swivel w/ toothed adapter
        53 - Swivel w/ pipe thread stem
        54 - Swivel w/ threaded stem
        56 - Swivel large top plate
        66 - Swivel small top plate
        67 - Swivel w/ expanding rubber adapter
        70 - Swivel w/ square stem
[3] (3) Code identifying: type of wheel and bearing
        42   - Cushion rubber, Delrin
        44.7 - Thermoplastic rubber, plain swivel casters only
        45   - Cushion rubber, ball
        52   - Polyolefin, Delrin
        53   - Polyolefin, Delrin
        54.7 - Polyolefin, plain swivel casters only
        55   - Hard rubber, ball
        91   - Polyurethane, Delrin
        441  - Cushion rubber (hi-tech) Performa - Delrin
        615  - Mirrolite rubber, ball
        915  - Mirrolite polyurethane, ball
[4] (4) May have additional codes as necessary as follows:
    Brake: BRK3 side lock brake, BK3 side lock brake
    Mounting: (Note: For use with 'C' codes 51, 54, 67 and 70 above)
    54 threaded stem
    Std 3/8" x 16NC x 1 1/4"
    MTG51 3/8" x 24NFx 1 1/16"
    51 grip ring stem
    MTG1 3/8" x 1 9/16"
    MTG2 7/16" x 1 9/16"
    MTG50 7/16" x 1"
    MTG51 7/16" x 1 29/32" w/o grip ring
    MTG52 7/16" x 1 29/32" w/grip ring
    MTG53 50810 adapter
    MTG54 50842 adapter
    MTG55 50865 adapter
    MTG56 50916 adapter
    MTG57 Ladder stem
    67 stem adapter
    w/o bumper w/bumper
    MTG40 3/4"-13/16" MTG40B
    MTG41 7/8"-15/16" MTG41B
    MTG42 1"-1 1/16" MTG42B
    MTG43 1 1/8"-1 3/16" MTG43B
    MTG44 1 1/4"-1 5/16" MTG44B
    MTG45 1 3/8"-1 7/16" MTG45B
    MTG46 1 1/2"-1 9/16" MTG46B
    MTG47 1 5/8"-1 11/16" MTG47B
    MTG51 7/8"-15/16" MTG51B
    MTG52 1"-1 1/16" MTG52B
    MTG53 1 1/8"-1 3/16" MTG53B
    MTG54 1 1/4"-1 5/16" MTG54B
    MTG55 1 3/8"-1 7/16" MTG55B
    70 square stem
    Std 3/4" Square x 2"
    MTG1 7/8" Square x 2 1/16"
    Seal: FSI food service industry, NSF Listed
    Axle: AX2 solid axle kit
    Grease fork: GRF1 no grease in fork
    Wheel bearing: WB01 Delrin bearing w/bushing, WB01B Delrin bearing w/o bushing
    Grease wheel: GRW1 no grease in wheel bearing
[5] May include a one digit prefix to indicate specific customer.
[6] 'C' prefix denotes chrome plated.

2 Series Casters[5] [6] [7] [8] [9] [10] [11]
  2.(5)(6).(7).(8)
  22.(5)(6).(7).(8)
  CG10547.000
  CG10548.000
  CG10572.000
  CG10573.000
  CG10574.000
  CG10575.000
  CG10576.000
  CG10577.000
  CG10578.000
 
[5] May include a one digit prefix to indicate specific customer.
[6] 'C' prefix denotes chrome plated.
[7] (5) 2 or 3 digit number identifying: wheel diameter and horn
        020 or 022 - 2 1/2" diameter
        026        - 2 1/2" diameter
        030 or 032 - 3" diameter
        034        - 3 1/2" diameter w/ss bushing
        036        - 3" diameter
        038        - 3" medium light duty
        040 or 042 - 4" diameter
        044        - 4" diameter w/ss bushing
        046        - 4" diameter
        050 or 052 - 5" diameter
        054        - 5" diameter w/ss bushing
        056        - 5" diameter
        057        - 5" x 1 1/4" wheel
        060 or 062 - 6" diameter
        20 or 22   - 2 1/2" diameter
        30 or 32   - 3" diameter
        38         - 3" medium light duty
        40 or 42   - 4" diameter
        50 or 52   - 5" diameter
        60 or 62   - 6" diameter
[8] (6) 2 digit number identifying: caster type and mounting
        08 - Rigid top plate
        37 - Swivel top plate
        51 - Swivel grip ring stem
        53 - Swivel w/ pipe thread stem
        54 - Swivel w/ threaded stem
        56 - Swivel top plate
        67 - Swivel w/ expanding rubber adapter
        70 - Swivel w/ square stem
        80 - Rigid w/ square stem
        88 - Rigid top plate
        89 - Swivel top plate
        98 - 3" rigid top plate
[9] (7) Code identifying: type of wheel and bearing
        35   - Welded disc rubber - ball
        35.9 - Welded disc polyurethane - ball
        43   - Cushion rubber (hi-tech) - Delrin
        44   - Soft rubber - nylon
        45   - Cushion rubber (hi-tech) - ball
        52   - Polyolefin - nylon
        53   - Polyolefin - Delrin
        54   - Hard rubber - nylon
        55   - Polyolefin - ball
        61   - Balloon cushion rubber - Delrin
        65   - Balloon cushion rubber - ball
        91   - Moldon polyurethane - Delrin
        95   - Moldon polyurethane - ball
        309  - Phenolic - roller
        319  - Phenolic - roller
        351  - Welded disc rubber - Delrin
        351  - Welded disc polyurethane - Delrin
        441  - Cushion rubber hi-tech Performa - Delrin
        443  - Soft rubber - nylon or sintered metal bushing
        444  - Performa rubber - Delrin with stainless steel bushing
        445  - Cushion rubber hi-tech Performa - ball
        470  - Ecoforma plain bearing
        485  - Grey TPR treadwheel with flange-type ball bearing
        543  - Hard rubber - nylon or sintered metal bushing
        544  - Polyolefin - Delrin with stainless steel bushing
        553  - Polyolefin - nylon or sintered metal bushing
        561  - Cushion rubber hi-tech Performa round tread - Delrin
        565  - Cushion rubber hi-tech Performa round tread - ball
        586  - Plain borewheel
        611  - Mirrolite rubber - Delrin
        615  - Mirrolite rubber - ball
        944  - Polyurethane hi-tech Delrin with stainless steel bushing
[10] (8) May have additional codes as necessary as follows:
         Brake: BRK1 tread lock brake (metal), BRK2 techlock brake (plastic)
         BRK5 total lock brake (plastic), BRK6 direction lock brake (plastic)
         Mounting:
         51 grip ring stem
         Std 5/8"x 2 3/16"
         MTG5 3/4"x2 3/16"
         MTG6 13/16"x2 3/16"
         MTG7 27/32"x2 3/16"
         MTG8 55/64"x2 3/16"
         MTG9 1"x2 3/16"
         MTG845 .845"x2 3/16"
         MTG846 .846"x2 3/16"
         53 pipe thread stem
         Std 3/4"-14NPT
         54 threaded stem
         Std MGT53 1/2"x13NCx1 1/2"
         MTG10 1/2"x13NCx3/4"
         MTG11 1/2"x13NCx1"
         MTG12 1/2"x20NFx3/4"
         MTG13 5/8"x11NCx1 3/4"
         MTG14 5/8"x18NFx1 3/4"
         MTG15 3/4"x18NFx1 3/4"
         MTG50 1/2"x20NFx1 1/2"
         70 square stem
         Std 3/4" Square x 2 1/16"
         MTG1 7/8" Square x 2 1/16"
         MTG3 3/4" Octogon x 2 1/16"
         MTG4 7/8" Square x 2 1/16"
         56 top plate
         Std 2 1/2"x3 5/8" w/slots
         MTG27 3 3/4"x4 3/8" w/slots
         MTG59 3 1/8"x4 1/8" w/ 11/32" holes
         67 stem adapter
         w/o bumper w/bumper
         MTG40 3/4"-13/16" MTG40B
         MTG41 7/8"-15/16" MTG41B
         MTG42 1"-1 1/16" MTG42B
         MTG43 1 1/8"-1 3/16" MTG43B
         MTG44 1 1/4"-1 5/16" MTG44B
         MTG45 1 3/8"-1 7/16" MTG45B
         MTG46 1 1/2"-1 9/16" MTG46B
         MTG47 1 5/8"-1 11/16" MTG47B
        MTG51 7/8"-15/16" MTG51B
         MTG52 1"-1 1/16" MTG52B
         MTG53 1 1/8"-1 3/16" MTG53B
         MTG54 1 1/4"-1 5/16" MTG54B
         MTG55 1 3/8"-1 7/16" MTG55B
         Seal: FSI food service industry, NSF Listed
         Axle: AX1 zerk axle, AX2 solid axle kit
         Nut: NT1 thick 3/8"x16 lock nut
         Grease fork: GRF1 no grease in fork, GRF3 mid-temp 300° continuous
         Dust cap: DC1 metal dust cap
         Wheel bearing: WB01 Delrin bearing w/ bushing, WB01B Delrin bearing w/o bushing
         (wheel only)
         Grease wheel: GRW1 no grease in wheel, GRW3 mid-temp 300° continuous
         Conductive: COND conductive caster or wheel
         Hi-Temp: HT Hi-temp caster or wheel (wheels HT nylon w/ metal bearings)
         Finish: YELLOW brass-like finish
[11] 'E' prefix denotes "Encore" brand.

3 Alpha Series[12]
  GDP - General Duty Plate (30)(31)(32)(33)(34)(35)
  LGR - Light Grip Ring (30)(31)(32)(33)(34)(35)
  LTP - Light Top Plate (30)(31)(32)(33)(34)(35)
  LTS - Light Threaded Stem (30)(31)(32)(33)(34)(35)
 
[12] (30) Wheel diameter:
          02 - 2"
          03 - 3.5"
          04 - 4"
          05 - 5"
          25 - 2.5"
          33 - 3"
     (31) 081 - Rigid top plate
          512 - 7/16 - 1 13/8 GR stem
          513 - 7/16 - 1 17/32 GR stem
          514 - 7/16 x 1 25/64 GR stem
          511 - 7/16 x 31/32 GR stem
          541 - 3/8 - 16 x 3/4 Threaded stem
          542 - 3/8 - 16 x 2 Threaded stem
          543 - 1/2 - 13 x x 1 1/2 Threaded stem
          544 - 3/8 - 16 x 1 17/32
          545 - 3/8 - 16 x 1 1/2 Threaded stem
          561 - Swivel top plate
     (32) 4200 - TRP Plain bore
          4202 - TRP Plain bore black
          4250 - TRP Ball bearing
          5200 - Polyolefin plain bore
          6220 - Soft rubber plain bore
          6520 - Hard rubber plain bore
     (33) 0 - No brake
          1 - Side brake
     (34) 0 - No TG
          1 - Metal TG
     (35) 0 - Zinc
          2 - Black oxide
          M - Meese special 4" Wheel
          S - Special LH
          W - Wide wheel

3 Series Casters[5] [6] [13] [14] [15] [16]
  3.(9)(10).(11).(12)
  33.(9)(10).(11).(12)
 
[5] May include a one digit prefix to indicate specific customer.
[6] 'C' prefix denotes chrome plated.
[13] (9) 1 or 3 digit number identifying: wheel diameter
         003 - 3" diameter
         004 - 4" diameter
         005 - 5" diameter
         006 - 6" diameter
         3   - 3" diameter
         4   - 4" diameter
         5   - 5" diameter
         6   - 6" diameter
[14] (10) 2 digit number identifying: caster type and mounting
          08 - Rigid top plate
          14 - Swivel with round or square stem
          17 - Swivel top plate
[15] (11) Code identifying: type of wheel and bearing
          34    - Welded disc rubber - ball
          34.9  - Welded disc polyurethane - ball
          301   - Phenolic - Delrin
          305   - Phenolic - ball
          309   - Phenolic - roller
          341   - Welded disc rubber - Delrin
          341.9 - Welded disc polyurethane - Delrin
          349   - Welded disc rubber - roller
          349.9 - Welded disc polyurethane - roller
          401   - Cushion rubber (hi-tech) - Delrin
          409   - Cushion rubber (hi-tech) - roller
          441   - Cushion rubber (hi-tech) Performa - Delrin
          449   - Cushion rubber (hi-tech) Performa - roller
          601   - Moldon rubber - Delrin 
          609   - Moldon rubber - roller
          801   - Polyolefin - Delrin
          802   - Polyolefin - plain
          809   - Polyolefin - roller
          901   - Moldon polyurethane (hi-tech) - Delrin
          909   - Moldon polyurethane (hi-tech) - roller
[16] (12) May have additional codes as necessary as follows:
          Brake: BRK1 tread lock brake
          Mounting:
          MTG7 3/4" Round x 2 1/2"
          MTG9 7/8" Round x 2 1/2"
          MTG11 1" Round x 2 1/2"
          MTG31 7/8" Square x 2 1/2"
          Seal: FSI food service industry
          Axle: AX1 zerk axle, AX2 solid axle
          Nut: NT1 thick 3/8" x 16 lock nut
          Grease fork: GRF1 no grease in fork, GRF2 double grease in fork,
          GRF3 mid-temp 300° continuous
          Dust cap: DC1
          Wheel bearing:
          w/o bushing w/bushing
          WB01B WB01 Delrin bearing, 2 piece
          WB09B WB09 Standard plastic cage roller bearing
          WB29B WB29 Standard metal cage roller bearing
          Washer:
          WSR1 metal thrust and retainer washers
          WSR2 sintered iron step washers
          WSR3 sealed metal retainer & steel thrust washers
          GREASE WHEEL: GRW1 no grease in wheel, GRW2 double grease in wheel,
                        GRW3 mid-temp 300° continuous

4 Series Casters 1 3/8 & 1 1/2 Tread Widths[5] [6] [17] [18] [19] [20] [21]
  4.(13)(14)(15).(16).(17)
  44.(13)(14)(15).(16).(17)
 
[5] May include a one digit prefix to indicate specific customer.
[6] 'C' prefix denotes chrome plated.
[17] (13) 1 or 2 digit number identifying: wheel diameter
          03 - 3" diameter
          04 - 4" diameter
          05 - 5" diameter
          06 - 6" diameter
          08 - 8" diameter
          3  - 3" diameter
          4  - 4" diameter
          5  - 5" diameter
          6  - 6" diameter
          8  - 8" diameter
[18] (14) Code identifying: top plate size
          1 - 4" x 4 1/2" top plate w/ seals
          2 - 4 1/2" x 6 1/4" top plate
          4 - 5" x 5 1/2" top plate
[19] (15) Code identifying: caster type
          08 - Rigid top plate
          09 - Swivel top plate
          79 - Impak swivel top plate
          98 - Rigid top plate
          99 - Swivel top plate
[20] (16) Code identifying: type of wheel and bearing
          35  - Welded disc - ball
          311 - Phenolic - Delrin
          312 - Phenolic - plain
          315 - Phenolic - ball
          319 - Phenolic - roller
          351 - Welded disc - Delrin
          359 - Welded disc - roller
          411 - Cushion rubber (hi-tech) - Delrin
          419 - Cushion rubber (hi-tech) - roller
          441 - Cushion rubber hi-tech Performa - Delrin
          449 - Cushion rubber hi-tech Performa - roller
          611 - Moldon rubber - Delrin
          619 - Moldon rubber - roller
          811 - Polyex II - Delrin
          812 - Polyex II - plain
          816 - Hi-temperature (HT)
          819 - Polyex II - roller
          911 - Polyurethane (hi-tech) - Delrin
          919 - Polyurethane (hi-tech) - roller
[21] (17) May have additional codes as necessary as follows:
          Brake: BRK1 tread lock brake
          Mounting:
          MTG7 3/4" Round x 2 1/2"
          MTG9 7/8" Round x 2 1/2"
          MTG11 1" Round x 2 1/2"
          MTG31 7/8" Square x 2 1/2"
          Seal: FSI food service industry
          Axle: AX1 zerk axle, AX2 solid axle
          Nut: NT1 Thick 1/2" x 13 Lock Nut, NT2 Thin 1/2" x 13 Lock Nut
          Grease fork: GRF1 no grease in fork, GRF2 double grease in fork,
          GRF3 mid-temp 300° continuous
          Dust cap: DC1 metal dust cap
          Wheel bearing:
          w/o bushing w/bushing
          WB01B WB01 Delrin bearing, 2 piece
          WB09B WB09 Standard plastic cage roller bearing
          WB29B WB29 Standard metal cage roller bearing
          Washer:
          WSR1 metal thrust and retainer washers
          WSR2 sintered iron step washers
          WSR3 sealed metal retainer & steel thrust washers
          Grease wheel: GRW1 no grease in wheel, GRW2 double grease in wheel,
          GRW3 mid-temp 300° continuous
          Conductive: COND conductive caster or wheel
          Hi-temp: HT Hi-temp wheel or caster (wheels HT nylon w/metal bearings)
          Finish: YELLOW brass-like finish

4 Series Casters 2" Tread Widths[5] [6] [22] [23] [24] [25] [26]
  4.(18)(19)(20).(21).(22)
  4.08199.555 SS BRK 7
  44.(18)(19)(20).(21).(22)
 
[5] May include a one digit prefix to indicate specific customer.
[6] 'C' prefix denotes chrome plated.
[22] (18) 1 or 2 Digit Identifying: Wheel Diameter
          03 - 3 1/4" diameter
          04 - 4" diameter
          05 - 5" diameter
          06 - 6" diameter
          08 - 8" diameter
          3  - 3 1/4" diameter
          4  - 4" diameter
          5  - 5" diameter
          6  - 6" diameter
          8  - 8" diameter
[23] (19) Code identifying: top plate size
          1 - 4" x 4 1/2" top plate
          2 - 4 1/2" x 6 1/4" top plate
          4 - 5" x 5 1/2" top plate
[24] (20) Code identifying: caster type
          07 - Swivel top plate w/seals
          08 - Rigid top plate
          09 - Swivel top plate
          79 - Impak swivel top plate
          97 - Swivel top plate w/seals
          98 - Rigid top plate
          99 - Swivel top plate
[25] (21) Code identifying: type of wheel and bearing
         SS    - Stainless Steel
         55    - Round tread, TPR tread on polypropylene core with twin precision ball
                 bearings
         61    - Moldon balloon rubber - Delrin
         69    - Moldon balloon rubber - roller
         331   - Phenolic - Delrin
         339   - Phenolic - roller
         431   - Cushion rubber (hi-tech) - Delrin
         439   - Cushion rubber (hi-tech) - Roller
         441   - Cushion rubber (hi-tech) Performa - Delrin
         449   - Cushion rubber (hi-tech) Performa - roller
         451   - Cushion rubber (hi-tech) Performa - Delrin
         451-2 - Cushion rubber (hi-tech) Performa - Delrin (w/black tread)
         459   - Cushion rubber (hi-tech) Performa - roller
         459-2 - Cushion rubber (hi-tech) Perofrma - roller (w/black tread)
         465   - Cushion rubber (hi-tech) Performa - 3/4 x 1 3/16 or 1 3/8 ball
         465-2 - Cushion rubber (hi-tech) Performa - 3/4 x 1 3/16 or 1 3/8 ball
                 (w/black tread)
         475   - Cushion rubber (hi-tech) Performa - 3/4 x 1 5/8 ball
         531   - Maxim nylon - Delrin
         534   - Maxim nylon - bronze
         539   - Maxim nylon - roller
         551   - Cushion rubber (hi-tech) Performa round tread - Delrin
         555   - Round tread, TPR tread on polypropylene core with twin precision ball
                 bearings
         559   - Cushion rubber (hi-tech) Performa round Tread - roller
         565   - Cushion rubber (hi-tech) Performa round tread - 3/4 x 1 3/16 or 1 3/8 ball
         575   - Cushion rubber (hi-tech) Performa round tread - 3/4 x 1 5/8 ball
         621   - Low profile rubber - Delrin
         629   - Low profile rRubber - roller
         631   - Moldon rubber - Delrin
         639   - Moldon rubber - roller
         665   - Moldon balloon rubber - ball
         731   - V-groove - Delrin
         739   - V-groove - roller
         831   - Polyex II - Delrin
         832   - Polyex II - plain
         839   - Polyex II - roller
         831.3 - Nylon - Delrin
         832.3 - Nylon - plain
         836   - Hi-temperature (HT)
         839.9 - Nylon - Roller
         921   - Polyurethane (hi-tech) - Delrin
         929   - Polyurethane (Hi-Tech) - roller
         931   - Moldon polyurethane - Delrin
         939   - Moldon polyurethane - roller
         939.3 - Moldon nylon
[26] (22) May have additional codes as necessary as follows:
          Brake: BRK1 tread lock brake
          BRK2 tech lock brake
          BRK3 side lock brake
          BRK4 top mounted tread lock brake
          BRK7 top mounted tread lock brake
          Mounting:
          MTG51 #1 swivel lock top plate
          MTG2 #2 top plate
          MTG4 #4 top plate
          Seal: FSI food service industry
          Axle:
          AX1 zerk axle kit with lock washer & nut
          AX2 solid axle kit with lock washer & nut
          Nut: NT1 thick 1/2" x 13" lock nut, NT2 thin 1/2" x 13" lock nut
          GREASE FORK: GRF1 no grease in fork, GRF2 double grease in fork,
          GRF3 mid-temp 300° continuous
          Wheel Bearing:
          Four series (2" tread) wheels
          w/o bushing w/bushing
          WB01B WB01 Standard two piece delrin
          WB11B WB11 Delrin brg, 1 pc w/steel washers
          WB09B WB09 Standard plastic cage roller brg
          WB19B WB19 Torrington style w/hytrel washers
          WB29B WB29 Standard steel cage roller bearing
          Four series (1 1/2" tread) wheels
          w/o bushing w/bushing
          WB01B WB01 Standard two piece Delrin
          WB09B WB09 Standard plastic cage roller Brg
          WB29B WB29 Standard steel cage roller bearing
          WB31 Delrin brg w/ 1/2"ID x 1 7/8" bushing
          WB39 Plastic cage roller brg w/ 1/2"ID x 1 7/8" bushing
          WB49 Metal cage roller brg w/ 1/2"ID x 1 7/8" bushing
          Washer:
          WSR1 metal thrust and retainer washers
          WSR2 sintered iron step washers
          WSR3 sealed metal retainer and steel thrust washers
          Grease wheel: GRW1 no grease in wheel, GRW2 double grease in wheel,
          GRW3 mid range 300° continuous
          Conductive: COND Conductive Caster or Wheel
          Hi-temp: HT hi-temp caster or wheel
          Stainless steel: SS all metal parts are stainless steel

6 Series Casters 2" Tread Widths[5] [6] [27] [28] [29] [30] [31]
  6.(23)(24)(25).(26).(27)
  66.(23)(24)(25).(26).(27)
 
[5] May include a one digit prefix to indicate specific customer.
[6] 'C' prefix denotes chrome plated.
[27] (23) Wheel diameter
          04 - 4" diameter
          05 - 5" diameter
          06 - 6" diameter
          08 - 8" diameter
[28] (24) Code identifying: top plate size
          2 - 4 1/2" x 6 1/4" top plate
[29] (25) Code identifying: caster type
          08 - Rigid top plate
          09 - Swivel top plate
          98 - Rigid top plate
          99 - Swivel top plate
[30] (26) Code identifying: type of wheel and bearing
          61    - Moldon balloon rubber - Delrin
          69    - Moldon balloon rubber - roller
          331   - Phenolic - Delrin
          339   - Phenolic - roller
          431   - Cushion rubber (hi-tech) - Delrin
          439   - Cushion rubber (hi-tech) - roller
          441   - Cushion rubber (hi-tech) Performa - Delrin
          449   - Cushion rubber (hi-tech) Performa - roller
          451   - Cushion rubber (hi-tech) Performa - Delrin
          451-2 - Cushion rubber (hi-tech) Performa - Delrin (w/black tread)
          459   - Cushion rubber (hi-tech) Performa - roller
          459-2 - Cushion rubber (hi-tech) Performa - roller (w/black tread)
          465   - Cushion rubber (hi-tech) Performa - 3/4 x 1 3/16 or 1 3/8 ball
          465-2 - Cushion rubber (hi-tech) Performa - 3/4 x 1 3/16 or 1 3/8 ball
                  (w/black tread)
          475   - Cushion rubber (hi-tech) Performa - 3/4 x 1 5/8 ball
          531   - Maxim nylon - Delrin
          534   - Maxim nylon - bronze
          539   - Maxim nylon - roller
          551   - Cushion rubber (hi-tech) Performa round tread - Delrin
          559   - Cushion rubber (hi-tech) Performa round tread - roller
          565   - Cushion rubber (hi-tech) Performa round tread - 3/4 x 1 3/16 or 1 3/8 ball
          575   - Cushion rubber (hi-tech) Performa Round tread - 3/4 x 1 5/8 ball
          621   - Low profile rubber - Delrin
          629   - Low profile rubber - roller
          631   - Moldon rubber - Delrin
          639   - Moldon rubber - roller
          665   - Moldon balloon rubber - ball
          731   - V-groove - Delrin
          739   - V-groove - roller
          831   - Polyex 11 - Delrin
          832   - Polyex 11 - plain
          839   - Polyex 11 - roller
          831.3 - Nylon - Delrin
          832.3 - Nylon - plain
          836   - Hi-temperature (HT)
          839.9 - Nylon - Roller
          921   - Polyurethane (hi-tech) - Delrin
          929   - Polyurethane (hi-tech) - roller
          931   - Moldon polyurethane - Delrin
          939   - Moldon polyurethane - roller
          939.3 - Moldon nylon
     
[31] (27) May have additional codes as necessary as follows:
          Brake: BRK1 tread lock brake
          Seal: FS1 food service industry
          Axle: AX1 zerk axle kit with lock washer & nut
          AX2 solid axle kit with lock washer & nut
          Nut: NT1 thick 1/2" x 13" lock nut
          NT2 thin 1/2" x 13" lock nut
          Grease fork: GRF1 no grease in fork, GRF2 double grease in fork,
          GRF3 mid-temp 300° continuous
          Wheel bearing:
          Four series (2" tread) wheels
          w/o bushing w/bushing
          WB01B WB01 Standard two piece Delrin
          WB11B WB11 Delrin brg, 1 pc w/steel washers
          WB09B WB09 Standard plastic cage roller brg
          WB19B WB19 Torrington style w/hytrel washers
          WB29B WB29 Standard steel cage roller bearing
          Washer:
          WSR1 metal thrust and retainer washers
          WSR2 sintered iron step washers
          WSR3 sealed metal retainer & steel thrust washers
          Grease wheel: GRW1 no grease in wheel, GRW2 double grease in wheel,
          GRW3 mid-range 300° continuous
          Conductive: COND conductive caster or wheel
          Hi-temp: HT hi-temp caster or wheel (wheels HT nylon w/metal bearings)

7 Series Casters with 2 1/2 and "and 3" Tread Widths[5] [6] [32] [33]
  7.06658.(28).(29)
  7.06659.(28).(29)
  7.08658.(28).(29)
  7.08659.(28).(29)
  7.10658.(28).(29)
  7.10659.(28).(29)
 
[5] May include a one digit prefix to indicate specific customer.
[6] 'C' prefix denotes chrome plated.
[32] (28) Code identifying: type of wheel and bearing
          381   - Phenolic - Delrin
          389   - Phenolic - roller
          371   - Phenolic - Delrin
          379   - Phenolic - roller
          451-2 - Performer - Delrin
          459-2 - Performer - roller
          661   - Moldon rubber - Delrin
          669   - Moldon rubber - roller
          671   - Moldon rubber - Delrin
          679   - Moldon rubber - roller
          951   - Polyurethane (hi-tech) - Delrin
          959   - Polyurethane (hi-tech) - roller
          971   - Moldon urethane - Delrin
          979   - Moldon urethane - roller
[33] (29) May have additional codes as necessary as follows:
          Seal: FSI food service industry
          Grease fork: GRF no grease, GRF2 double grease in fork,
                       GRF3 mid-temp 300° continuous
          Washer: WSR3 sealed wheel
          Grease wheel: GRW1 no grease, GRW2 double grease in wheel,
                        GRW3 mid-temp 300° continuous

Albion Caster[34]
  (1)-PB-(2)(3) 01 (4)N
  (1)-PB-(2)(3) 41 (4)N
  (1)-RR-(2)(3) 01 (4)N
  (1)-TM-(2)(3) 01 (4)N
  (1)-TM-(2)(3) 41 (4)N
  (1)-TS-(2)(3) 01 (4)N
  (1)-XA-(2)(3) 01 (4)N
  (1)-XA-(2)(3) 51 (4)N
  (1)-XC-(2)(3) 01 (4)N
  (1)-XC-(2)(3) 02 (4)N
  (1)-XC-(2)(3) 52 (4)N
  (1)-XE-(2)(3) 01 (4)N
  (1)-XE-(2)(3) 51 (4)N
  50-TS-(2)(3) 01 (4)N
  51-TS-(2)(3) 01 (4)N
  53-TS-(2)(3) 01 (4)N
  54-TS-(2)(3) 01 (4)N
 
[34] (1) Series number
     (2) Size of wheel in inches
     (3) Wheel width designation
     (4) R - Rigid
         S - Swivel

B-Line[35]
  B-(1)(2)(3)(4)(5)
 
[35] (1) Caster Type				
         S - Swivel				
         R - Rigid				
         T - Total Lock Brake				
     (2) Wheel Diameter				
         30 - 3"				
         35 - 3-1-/2"				
         40 - 4"				
         50 - 5"				
         60 - 6"				
         80 - 8"				
     (3) Wheel Type - 3 letter combination 				
         TPR - Thermo-Rubber Flat				
         TPU - Thermo-Urethane				
         POD - Polypropylene HD				
         GFN - Glass filled Nylon				
         XXX - 3 letter combination outlining other wheel options				
     (4) Fastening				
         T1 - T999 - Threaded 				
         P1 - P999 - Top Plate				
         G1 - G999 - Grip Ring				
         A1 - A999 - Expanding Adapters				
     (5) Brakes and other options to be added here, i.e. special colors, other customer
     requirements, etc.				
         B - B10 - Brake Options				
     

D-Line[35]
  D-(1)(2)(3)(4)(5)
 
[35] (1) Caster Type				
         S - Swivel				
         R - Rigid				
         T - Total Lock Brake				
     (2) Wheel Diameter				
         30 - 3"				
         35 - 3-1-/2"				
         40 - 4"				
         50 - 5"				
         60 - 6"				
         80 - 8"				
     (3) Wheel Type - 3 letter combination 				
         TPR - Thermo-Rubber Flat				
         TPU - Thermo-Urethane				
         POD - Polypropylene HD				
         GFN - Glass filled Nylon				
         XXX - 3 letter combination outlining other wheel options				
     (4) Fastening				
         T1 - T999 - Threaded 				
         P1 - P999 - Top Plate				
         G1 - G999 - Grip Ring				
         A1 - A999 - Expanding Adapters				
     (5) Brakes and other options to be added here, i.e. special colors, other customer
     requirements, etc.				
         B - B10 - Brake Options				
     

E Line Casters[36]
  E-(1)(2)(3)(4)(5)
 
[36] (1) Caster Type+CC54:F82				
         S - Swivel				
         R - Rigid				
         T - Total Lock Brake
         SSES - Swivel
         SSER - Rigid				
     (2) Wheel Diameter				
         4X2 - 4"				
         5X2 - 5"				    
         6X2 - 6"				
         8X2 - 8"				
     (3) Wheel Type - 3 letter combination				
         TPR - Thermo-Rubber Flat				
         TUM - Thermo-Urethane				
         POD - Polypropylene HD
         HRT - Hi Temp Glass filled Nylon				
         TPD – Thermo Rubber Donut
         KWL – Solid Polyurethane	
         WNY – White Nylon
         RET – Hi Temp Glass Filled Polypropylene	
         MAX – Glass Filled Nylon							
         XXX - 3 letter combination outlining other wheel options				
     (4) Fastening				
         No designation - standard 4” x 4-1/2” Top Plate				
         T1 - T999 - Threaded				
         P1 - P999 - Top Plate				
         G1 - G999 - Grip Ring				
         A1 - A999 - Expanding Adapters				
     (5) Brakes and other options to be added here, i.e. special colors, other customer 
         requirements, etc.				
         TBK  – Tread Lock Brake				
         CAMS – Short Pedal Cam Brake				
         CAML – Long Pedal Cam Brake				
         WFB  – Wheel Face Brake

Jarvis Caster
  (1)(2)(3)(4)(5)[40]
  (1)(2)(3)(4)(5)[41]
  (1)(2)(3)(4)(5)[39]
  (1)(2)(3)(4)(5)[37]
  (1)(2)(3)(4)(5)[38]
  (1)(2)(3)(4)(5)(6)[42]
 
[37] (1) Wheel Dia. - 2",2 1/2",3",4"
     (2) Series Number - 291-292
     (3) Wheel Type
         103 soft rubber,delrin bearing
         104 hard rubber,delrin bearing
         105 soft rubber,delrin bearing
         106 hard rubber,delrin bearing
         521 polyolefin,plain bearing
         522 polyolefin,roller bearing
         109 soft rubber,delrin bearing
         209 soft rubber,roller bearing
         110 hard rubber,delrin bearing
         210 hard rubber,roller bearing
         121 phenolic,plain bearing
         221 phenolic,roller bearing
     (4) Mounting Type - may be followed by Stem Type designation
         or Top Plate numbers 1,2 or 3
         291 swivel top plate
         292 rigid top plate
     (5) Optional Accessories - Side brakes on swivels (SB), Special Top Plate SP
[38] (1) Wheel Dia. - 1 3/4",2 1/2",3",4",5",6",8",10"
     (2) Series Number - 130,131,134,135,136,138,138R,140,61,62
     (3) Wheel Type
         109 soft rubber,plain bearing
         110 hard rubber,plain bearing
         209 soft rubber,roller bearing
         210 hard rubber,roller bearing
         121 macerated,plain bearing
         121HT high temp - macerated, plain bearing
         221 macerated,roller bearing
         222 macerated,roller bearing
         521 polyolefin,plain bearing
         522 polyolefin,roller bearing
         531 polyolefin,plain bearing
         532 polyolefin,plain bearing
         215G gray polyurethane,roller bearing
         215P blue polyurethane,roller bearing
         315G gray polyurethane,delrin bearing
         315P blue polyurethane,delrin bearing
         215GF gray rubber,advantage,roller bearing
         315GF gray rubber,advantage,delrin bearing
     (4) Mounting Type - may be followed by Stem Type designation
         or Top Plate numbers 1,2,3,4,5 or 7
         Swivel top plate 130
         Rigid top plate 131
         Swivel spring ring 134
         Riged spring ring 135
         Swivel threaded stem 136
         Pipe plug 138
         Swivel rubber applicator 140
     (5) Optional Accessories - brake WB or BRK, swivel lock SLI, grease seal G.S., zerk
         axle Z.A., Special Top Plate SP,Plain axle PA
     Note: R after series number indicates ridgid
[39] (1) Wheel Dia. - 2",2 1/2",3"
     (2) Series Number - L-2,L-3,L-4,L-9,L-10
     (3) Wheel Type
         101 solid soft rubber
         201G gray rubber on polyolefin core
         501 solid polyolefin
     (4) Mounting Type - may be followed by Stem Type designation
         or Top Plate numbers 1,2 or 3
         L-2 straight stem - swivel
         L-3 spring ring stem - swivel
         L-4 thread stem - swivel
         L-9 top plate - swivel
         L-10 top plate rigid
     (5) Optional Accessories - side brake SB, Special Top Plate SP
[40] (1) Wheel Dia. - 2",2 1/2",3",3 1/2",4",5",6"
     (2) Series Number - 3A,30,31,32,33,34,35,36,37,38,40,50,51,54,305,315,325,335,345,355,
         365,375,405,30P,31P,34P,36P,50H,50MG,54H,54MG,56H,56MG,56MG3A,3S,36SATP,S30,S31,
         S32,S33,S34,S35,S36,S37,S40,S50MG,S54MG,S56MG,38R
     (3) Wheel Type
         105 soft rubber,delrin bearing
         105C soft rubber,conductive,plain bearing
         106 hard rubber,delrin bearing
         152 soft rubber,ball bearing
         162 hard rubber,ball bearing
         452 soft rubber,side plate,ball bearing 
         452C soft rubber,conductive,side plate,ball bearing
         452G gray soft rubber,side plate,ball bearing
         462 hard rubber,side plate,ball bearing
         113 steel disc,rubber tire,ball bearing
         113G steel disc,gray rubber,ball bearing
         113P steel disc,polyurethane tire,ball bearing
         121 macerated, plain bearing
         500 soft rubber,donut side plate,ball bearing
         600 soft gray rubber,ball bearing
         314GD gray rubber donut,delrin bearing
         213GD gray rubber donut,ball bearing
         314GF gray rubber flat,delrin bearing
         213GF gray rubber flat,ball bearing
         213BF black rubber,flat,ball bearing
         314G gray polyurethane,delrin bearing
         314GF black rubber,flat,delrin bearing
         213G gray polyurethane,ball bearing
         213P blue polyurethane,ball bearing
         314P blue polyurethane, delrin bearing
         213MD,213MF light blue rubber,ball bearing,donut or flat
         314MD,314MF light blue rubber,delrin bearing,donut or flat
         314MD,314MF light blue rubber,delrin bearing,donut or flat
         213RTD,213RTF red rubber,hi-temp,ball bearing,donut or flat
         314RTD,314RTF red rubber,hi-temp,delrin bearing, donut or flat
         505 polyolefin,delrin bearing
         513 polyolefin,plain bearing
         514 polyolefin,ball bearing
         521 polyolefin,plain bearing
         521F polyolefin filled
         521HT polyolefin,hi-temp
         521NHT nylon,filled,hi-temp,plain bearing
         522 polyolefin,roller bearing
         522F polyolefin filled,roller bearing
         522HT polyolefin,hi-temp,roller bearing
         751 elastomer,delrin bearing
         750 elastomer,ball bearing
         755 elastomer,precision bearing
     (4) Mounting Type - may be followed by Stem Type designation
         or Top Plate numbers 1,2,3,4,5 or 7
         Swivel top plate 30,3A,30P,305,50,50H,50MG,S30,S50MG
         Rigid top plate 31,31P,315,51,S31
         Octagon swivel 32,325
         Octagon rigid 33,335
         Swivel spring ring 34,34P,345,54,54H,54MG,S34,S54MG
         Rigid spring ring 35,35P,355,55,S35
         Swivel threaded stem 36,36P,365,56,56H,56MG,S36,S56MG
         Rigid threaded stem 37,375,S37
         Pipe plug 38
         Swivel rubber applicator 40,405,S40
         Hollow kingpin 3S - 3/8 bushing
     (5) Optional Accessories - standard brake WB or BRK, posi-loc brake PL,
         swivel lock SLI, total lock APSL, grease seal G.S., zerk axle Z.A.,
         Special Top Plate SP, plain axle PA
         Note: S before series number - stainless steel caster, Type 304; 36SATP - adjustable
         top plate; 5 after series - nickel plate, R after series number indicates ridgid
     (6) Optional wheel colors - black on black B/B,black on gray B/G,red R,gray on black
         G/B
     
[41] (1) Wheel Dia. - 3",4",5",6",8"
     (2) Series Number - 81,82,71,72,41,45,47,84,84R,S71,S72,S81,S82
     (3) Wheel Type
         220G gray poly,roller bearing
         220P blue poly,roller bearing
         220MF blue rubber,ball bearing
         320G gray poly,delrin bearing
         320P blue poly,delrin bearing
         220GF gray rubber,advantage wheel,roller bearing
         220GFC gray rubber,conductive,roller bearing
         320GF gray rubber,advantage wheel,delrin bearing
         122 phenolic,plain bearing
         222 phenolic,roller bearing
         531 polyolefin,plain bearing
         531F polyolefin filled,plain bearing
         531HT hi-temp,plain bearing
         532 polyolefin,roller bearing
         532F polyolefin filled,roller bearing
         532HT polyolefin filled, hi-temp,roller bearing
         620 mold-on rubber,roller bearing
         720 mold-on poly,roller bearing
         721 mold-on poly,delrin bearing
         760 elastomer,roller bearing
         761 elastomer,delrin bearing
         770 elastomer,precision bearing
         600 hi-modulus donut,ball bearing
         601 hi-modulus donut,delrin bearing
         220GD gray rubber,advantage,donut,ball bearing
         220GDB gray rubber,advantage,donut,ball bearing
         320GD gray rubber,advantage,donut,delrin bearing
     (4) Mounting Type - may be followed by Stem Type designation
         or Top Plate numbers 1,2,3 or 4
         Swivel top plate 81,71,S71,S81
         3 3/4 x 4 1/2
         Rigid top plate 82,72,S72,S82
         3 3/4 x 4 1/2
         Swivel stem 41,45,47,84,S74
         Rigid stem 84R
     (5) Optional Accessories - side brake SB, wheel brake WB or BRK, posi-loc brake PL,
         swivel lock SL, total lock APSL, grease seal G.S., zerk axle Z.A., Special Top
         Plate SP, Plain axle PA
     Note: S before series number - stainless steel caster, Type 304.
[42] (1) Wheel Dia. - 2 1/2",3",4",5"
     (2) Series Number - 13,13P,14,14P,17,19,25,25P,26,26P,27,28,135,145,
         255,265,275,W13,W14,W17,W19,W25,W28
     (3) Wheel Type
         103 soft rubber,delrin bearing
         103C soft rubber conductive,plain bearing
         103G soft rubber,gray rubber
         104 hard rubber,delrin bearing
         132 soft rubber,ball bearing
         301 soft rubber, polyolefin core, plain bearing
         433 soft rubber,donut side plate, delrin bearing
         433G gray rubber,side plate, delrin bearing
         211G gray polyurethane,delrin bearing
         212G gray polyurethane,ball bearing
         212P blue polyurethane,ball bearing
         201G gray soft rubber,polyolefin core, plain bearing
         511 polyolefin,plain bearing
         521 polyolefin,plain bearing
     (4) Mounting Type - may be followed by Stem Type designation
         or Top Plate numbers 1,2,3 or 4
         Thread stem 13,W13,135,13P - swivel
         Sping ring 14,W14,145,14P - swivel
         Pipe plug 17,W17 - swivel
         Octagon swivel 19,W19 - swivel
         Top plate 25,W25,255,25P - swivel
         Top plate 26,265,26P - rigid
         Rubber app 27,W27,275 - swivel
         Hollow kingpin 28,W28 - 3/8 bushing - swivel
     (5) Optional Accessories - side brake SB, verti-loc brake WB or BRK, grease
         seal G.S.5 after series number - nickel plate, Special Top Plate SP
     (6) Optional wheel colors - R (red)

Shepherd Caster
  100 Series Caster[43] [44] [45]
  1400 Series Caster[43] [44] [46]
  3400 Series Caster[43] [44] [46]
  400 Series Caster[43] [44] [47]
  4700 Series Caster[43] [44] [47]
  500 Series Caster[43] [44] [45]
  6700 Series Caster[43] [44] [46]
  7700 Series Caster[43] [44] [47]
  8 Series[43] [44] [48]
  87 Series[43] [44] [48]
  9159R
  A400 Series Caster[43] [44] [47]
  A4700 Series Caster[43] [44] [47]
  A8 Series[43] [44] [48]
  A87 Series[43] [44] [48]
  B4700 Series Caster[43] [44] [47]
  B87 Series[43] [44] [48]
  BLS23171TZ-GFN51(KK)
  BLS23171TZ-GFN51(KK)TB
  C(1)(2)(3)(4)(5)(6)(7)[49]
  D400 Series Caster[43] [44] [47]
  D4700 Series Caster[43] [44] [47]
  D8 Series[43] [44] [48]
  D87 Series[43] [44] [48]
  EK400 Series Caster[43] [44] [47]
  EK8 Series[43] [44] [48]
  EP Series Caster[50] [51]
  EP400 Series Caster[43] [44] [47]
  EP8 Series[43] [44] [48]
  ER Series Caster[50] [51]
  ER400 Series Caster[43] [44] [47]
  ER8 Series[43] [44] [48]
  EW Series Caster[50] [51]
  EW Series Caster[50] [51]
  EW400 Series Caster[43] [44] [47]
  EW400 Series Caster[43] [44] [47]
  EW8 Series[43] [44] [48]
  EW8 Series[43] [44] [48]
  EX Series Caster[50] [51]
  EY Series Caster[50] [51]
  G400 Series Caster[43] [44] [47]
  G4700 Series Caster[43] [44] [47]
  G8 Series[43] [44] [48]
  G87 Series[43] [44] [48]
  K400 Series Caster[43] [44] [47]
  K8 Series[43] [44] [48]
  PAD(20)(22)(23)(24)[52] [53]
  PAT(20)(21)(23)(24)[52] [53]
  PGD (7)(8)(9)(10)(11)(12)(13)(14)[54]
  PGR(7)(8)(9)(10)(11)(12)(13)(14)[54]
  PGS(7)(8)(9)(10)(11)(12)(13)(14)[54]
  PGT(7)(8)(9)(10)(11)(12)(13)(14)[54]
  PRE(1)(2)(3)(4)(5)(6)[55]
  PRI(1)(2)(3)(4)(5)(6)[55]
  PRQ(15)(16)(17)(18)[56] [57]
  PSQ(15)(16)(17)(18)(19)[56] [57]
  RIG MCD (25)(26)(27)(28)(29)(30)(31) - Directional Lock[54] [58]
  RIG MCR (25)(26)(27)(28)(29)(30)(31) - Rigid[54] [58]
  RIG MCS (25)(26)(27)(28)(29)(30)(31)[54] [58]
  RP Series Caster[50] [51]
  U400 Series Caster[43] [44] [47]
  U8 Series[43] [44] [48]
  W400 Series Caster[43] [44] [47]
  W8 Series[43] [44] [48]
 
[43] Wheel Type
     17 - Rubber Tired - Ball Bearing
     21 - Rubberex - Self Lubricating
     22 - Rubberex - Ball Bearing
     23 - Rubberex - Roller Bearing
     27 - Rockite (Hard Rubber) - Self Lubricating
     29 - Rockite - Roller Bearing
     30 - Plaskite - With Bushing
     31 - Plaskite - Roller Bearing
     40 - K-Wheel (Solid Polyurethane) - Delrin Bearing
     41 - K-Wheel (Roller Bearing)
     60 - Polyflex (Solid Polypropylene) - Plain Bearing
     61 - Polyflex - Roller Bearing
     64 - Glass-filled Polypropylene (Waffle Design) - Delrin Bearing
     65 - Glass-filled Polypropylene (Waffle Design) - Roller Bearing
     66 - Glass-Filled Polypropolene (Waffle Design) - Presision Bearing
     90 - Thermoplastic Rubber Tread on P/P Core - Delrin Bearing
     91 - Thermoplastic Rubber Tread on P/P Core - Roller Bearing
     92 - Thermoplastic Rubber Tread on P/P Core - Ball Bearing
     93 - Thermoplastic Rubber Tread on P/P Core - Precision Bearing
     96 - Polyurethane Tread on P/P Core - Delrin Bearing
     97 - Polyurethane Tread on P/P Core - Ball Bearing
     98 - Polyurethane Tread on P/P Core - Roller Bearing
     99 - Polyurethane Tread on P/P Core - Precision Bearing
[44] With or without suffix:
     R - Riveted Wheel Construction
     RB - Roll-Lock Brake - Tread Brake
     SB - Side Brake
     SS - Stainless Steel
     TB - Total Brake Lock
     WFB - Wheel Face Brake
[45] Wheel Size
     2 - 2" Diameter
     2 1/2 - 2.5" Diameter
     3 - 3" Diameter
     4 - 4" Diameter
[46] Wheel Size
     4 - 4" Diameter
     5 - 5" Diameter
     6 - 6" Diameter
     8 - 8" Diameter
[47] Wheel Size
     2 1/2 - 2.5" Diameter
     3 - 3" Diameter
     3 1/2 - 3.5" Diameter
     4 - 4" Diameter
     5 - 5" Diameter
     6 - 6" Diameter
[48] Wheel Size
     3 - 3" Diameter
     3 1/2 - 3.5" Diameter
     4 - 4" Diameter
     5 - 5" Diameter
[49] C - Caster
     (1) Series - 00 (POL wheel only), 08, 68, H08, H68, S08, S68
     (2) Wheel Diameter - 1, 2, 3, 4, 5, 6, 9, 16, 23, 24, 25, 26, 35
     (3) Mounting options: 02 through 900 for attachment method
     (4) Finish:
         BC - Bright chrome
         BO - Black oxide
         PN - Polished nickel
         ZN – Zinc
         TZ – Trivalent Zinc(ROHS)
     (5) Wheel type/material
         3E - Dished polyolefin
         3ES - Solid polyolefin
         3H - Hard rubber
         3R - Soft rubber
         TPR - Thermoplastic rubber
         TPU - Thermoplastic urethane
         MNT - Monoprene
         POL – Polyolefin log
     (6) Bearing: 0 - Plain bore, 1 - Delrin, 2 - Ball bearing
     (7) Brake options: Blank - No brake, TB - Tread brake. Top lock break
[50] (1) Wheel Type
         1 - Thermoplastic rubber tread on polypropylene core
         2 - Phenolic
         4 - Rubberex
         6 - Polypropylene
         7 - Rockite
         9 - Polyurethane tread on polypropylene core
     (2) Finish
         2 - Black oxide (black iron oxide)
         3 - Nickel
         5 - Zinc
         8 - Chrome
     (3) Wheel Size
         9 - 2" Diameter
         11 - 2 1/2" Diameter
         20 - 3" Diameter
         21 - 4" Diameter
         22 - 5" Diameter
[51] With or without suffix:
     R - Riveted Wheel Construction
     RB - Rollock Brake (Tread Brake)
     SB - Side Brake
     WFB - Wheel Face Brake
[52] (20) Wheel size: 5"
     (21) Total lock top plate models
     (22) Directional lock top plate models
     (23) Wheel type: Monotech donut, monotech flat, soft rubber, TPR ball bearing,
          TPU - Thermoplastic urethane
     (24) Plating: Zinc
[53] NSF Listed production beginning with date code 12-18-2007.
[54] NSF Listed production beginning with date code August 2011.
[55] (1) Wheel size: 16 - 1 5/8", 20 - 2", 25 - 2 1/2", 30 - 3", 40 - 4", 50 - 5"
     (2) Fastening: 02 through 900 for attachment method
     (3) Finish: BC - Bright chrome, BO - Black oxide, PN - Polished nickel, ZN - Zinc
     (4) Wheel type:
         3E - Dished polyolefin
         3ES - Solid polyolefin
         3H - Hard rubber
         3R - Soft rubber
         TPR - Thermoplastic rubber
         TPU - Thermoplastic urethane
         MNT - Monoprene
     (5) Wheel color: Blank - Black, GR/GR - Grey on grey
     (6) Brake options: B - Side brake, TB - Tread brake, TL - Top lock
[56] (15) Wheel size: 20 - 2", 25 - 2.5", 30 - 3", 40 - 4"
     (16) Wheel type: Hard rubber, soft rubber, polyolefin
     (17) Plating type: Clear zinc or nickel
     (18) Friction brake optional.
     (19) Polyolefin 2" and 4" wheels are not NSF Certified.
[57] NSF Listed production beginning with date code 11-12-2007.
[58] (25) Size:
          30 - 3"
          40 - 4"
          50 - 5"
          60 - 6"
     (26) Fastening: 145 through 900 for attachment method
     (27) Finish:
          BC - Bright chrome
          SS - Stainless steel
          TZ- Zinc
     (28) Wheel Type:
          3E - Dished polyolefin
          DMT - Donut monotech
          FMT - Flat monotech
          HDR - Hard rubber
          SFR - Soft rubber
          TPR - Thermoplastic rubber
          TPU - Urethane
     (29) Bearing:
          0 - Plain Boar
          1 - Delrin
          2 - Ball Bearing
          3 - Precision Bearing
     (30) Thread Guard:
          1 - None
          2 - Partial
          3 - Full
     (31) Wheel Color:
          BG - Blue on Grey
          GG - Grey on Grey
          KK - Black

[59] (7)  Size: 30 - 3", 35 - 3 1/2", 40 - 4", 50 - 5", 60 - 6"
     (8)  Fastening: 02 through 900 for attachment method
     (9)  Finish: BC - Bright chrome, BO - Black oxide, PN - Polished nickel, ZN - Zinc
     (10) Wheel type: 3E - Dished polyolefin, DMT - Donut monotech, FMT - Flat manotech,
          HDR - Hard rubber, SFR - Soft rubber, TPR - Thermoplastic rubber, TPU - Urethane
     (11) Bearing: 0 - Plain bore, 1 - Delrin, 2 - Ball bearing, 3 - Precision bearing
     (12) Thread guard: 1 - None, 2 - Partial, 3 - Full (3 inch wheel only)
     (13) Wheel color: BG - Blue on grey, GG - Grey on grey, KK - Black
     (14) Brake options: Blank - No brake, TB - Tread brake, TL - Top lock

Number of matching Manufacturers is 1
Number of matching Products is 258
Processing time was 1 seconds