NSF Product and Service Listings

These NSF Official Listings are current as of Sunday, September 21, 2014 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/food/Listings.asp?Standard=169&Company=37080&


NSF/ANSI 169
Special Purpose Food Equipment and Devices



 
Procon Products 
869 Seven Oaks Boulevard
Suite 120 
Smyrna, TN 37167 
United States 
615-355-8000

Facility : # 1 Ireland


COMPONENTS:

207mm Co Mount Rotary Vane Pump[1]
  71(1)(2)(3)(4)(5)(6)(7)(8)(9)(10)(11)(12)
 
[1] (1)  Alphabetical or numeric character indicating series and housing type
    (2)  Alphabetical or numeric character indicating mounting and drive configuration
    (3)  Three digit number indicating flow rate in GPH
    (4)  Alphabetical character indicating elastomer 
    (5)  Number indicating rotation
    (6)  Number indicating clearance
    (7)  Alphabetical or numeric character indicating valve type and configuration
    (8)  Alphabetical or numeric character indicating pressure range
    (9)  Alphabetical or numeric character indicating pins and vanes
    (10) Reserved for future use
    (11) Reserved for future use
    (12) Three digit number indicating pressure setting in psi (optional)

215 Mag Drive Pump[2]
  319(1)(2)(3)(4)(5)(6)(7)(8)(9)(10)(11)
  31A(1)(2)(3)(4)(5)(6)(7)(8)(9)(10)(11)
 
[2] Models beginning with 313, 314, 317, 318, 319, and 31A are acceptable for use in potable
    water, carbonated water, alcohol less than 8% and milk. Models beginning with 311 and
    312 are acceptable with potable water only. 
    (1)  A, H, or J indicating magnetic coupler material
    (2)  Two or Three digit number indicating flow rate
    (3)  Alphabetical character indicating Elastomer type
    (4)  Number indicating rotation direction
    (5)  Number indicating internal pump clearance
    (6)  A, B, C, D, F, G, P, R, T, or X indicating valve type and configuration
    (7)  Alphabetical character indicating pressure range
    (8)  Number indicating vane material and pin
    (9)  X or A indicating adapter type
    (10) Three digit number indicating motor information
    (11) Value of 0-250 psi

CMP-7000 Canned Motor Pump[3] [4]
  21(1)(2)(3)(4)(5)F(6)(7)(8)(9)(10)
  23(1)(2)(3)(4)(5)F(6)(7)(8)(9)(10)
 
[3] Models beginning with 21 and 23 are acceptable for potable water, carbonated water, and
    syrup.
    (1)  Alphabetical character indicating motor type.
    (2)  Number indicating cord type.
    (3)  Alphabetical character indicating motor capacitor location.
    (4)  Alphabetical character indicating housing description.
    (5)  Alphabetical character indicating flow rate. 
    (6)  Number indicating internal pump clearance.
    (7)  A,B,C,D,F, or G indicating valve type and configuration.
    (8)  Alphabetical character indicating pressure range.
    (9)  Digit indicating future use. 
    (10) Three digit number indicating alternate cord configuration.
[4] Pumps are intended to be installed in an unexposed non-food zone.

Gear Pump[5]
  5 (1)(2)(3)(4)(8)(5)(6)(7)XX(9)
 
[5] Suffixes indicate the following:
    (1)  1 or 3 indicating NSF approval
    (2)  Alphabetical or numeric character indicating motor power and voltage
    (3)  Number indicating cord type
    (4)  Alphabetical character indicating housing material and port configuration
    (5)  Alphabetical character indicating elastomer type
    (6)  Number indicating rotation direction
    (7)  Alphabetical character indicating pump style
    (8)  Alphabetical character indicating flow rate
    (9)  Three digits motor designation 
    (XX) Reserved for future use

Mag Drive Pump[2]
  31(1)(2)(3)(4)(5)(6)(7)(8)(9)(10)(11)
 
[2] Models beginning with 313, 314, 317, 318, 319, and 31A are acceptable for use in potable
    water, carbonated water, alcohol less than 8% and milk. Models beginning with 311 and
    312 are acceptable with potable water only. 
    (1)  A, H, or J indicating magnetic coupler material
    (2)  Two or Three digit number indicating flow rate
    (3)  Alphabetical character indicating Elastomer type
    (4)  Number indicating rotation direction
    (5)  Number indicating internal pump clearance
    (6)  A, B, C, D, F, G, P, R, T, or X indicating valve type and configuration
    (7)  Alphabetical character indicating pressure range
    (8)  Number indicating vane material and pin
    (9)  X or A indicating adapter type
    (10) Three digit number indicating motor information
    (11) Value of 0-250 psi

Motor Pump - 3” Pumps[6]
  41(1)(2)B(3)F(4)(5)(6)(7)(8)
  41(1)(2)D(3)F(4)(5)(6)(7)(8)
  43(1)(2)B(3)F(4)(5)(6)(7)(8)
  43(1)(2)D(3)F(4)(5)(6)(7)(8)
 
[6] Models beginning with 41 or 43 are acceptable for potable water and syrup.
    (1) Alphabetical character indicating motor type.
    (2) Number indicating cord type.
    (3) Alphabetical character indicating flow rate.
    (4) Number indicating internal pump clearance.
    (5) A, B, C, D, F, G, H, J, K, L, M, N, or P indicating valve type and configuration.
    (6) Alphabetical character indicating pressure range.
    (7) Digit indicating future use.
    (8) Three digit number indicating alternate cord configuration.

Motor Pump - Microvane Pumps[7]
  61(1)(2)A(3)F(4)(5)(6)(7)(8)
  61(1)(2)D(3)F(4)(5)(6)(7)(8)
  61(1)(2)E(3)F(4)(5)(6)(7)(8)
  61(1)(2)F(3)F(4)(5)(6)(7)(8)
 
[7] Models 61xxAxFxxxxx are acceptable for potable water contact, carbonated water, syrup,
    and milk.  Models 61xxBxFxxxxx are acceptable for potable water contact.
    (1) Alphabetical character indicating motor type.
    (2) Number indicating cord type.
    (A) Alphabetical character indicating housing material and port configuration.
    (3) Alphabetical character indicating flow rate.
    (4) Number indicating pump rotation direction.
    (5) Alphabetical character indicating valve type and configuration.
    (6) Alphabetical character indicating pressure range.
    (7) Alphabetical character indicating pump configuration.
    (8) Three digit number indicating pressure setting in psi.

Rotary Vane Pump[8]
  10603[9]
  10604[9]
  10605[9]
  10606[9]
  10607[9]
  10776[9]
  11(7)(1)(2)(A)(3)(4)(5)(6)[9]
  11(7)(1)(2)(A)(3)(4)(5)(6)[10]
  11(7)(1)(2)(A)(3)(4)(5)(6)[10] [Pb]
  14(7)(1)(2)(A)(3)(4)(5)(6)[10]
  14(7)(1)(2)(A)(3)(4)(5)(6)[10] [Pb]
  15(7)(1)(2)(A)(3)(4)(5)(6)[10]
 
[8] (1) Alphabetical character indicating mounting and drive configuration. 
    (2) Three digit number indicating flow rate in GPH. 
    (3) Number indicating rotation, slinger, vanes or vane-pins. 
    (4) Number indicating clearance. 
    (5) Alphabetical or numeric character indicating valve type and configuration. 
    (6) Alphabetical or numeric character indicating pressure range.
    (7) Alphabetical or numeric character indicating series and housing type.
    (A) Alphabetical character indicating elastomer.
[9] Stainless steel bodied pumps for use with potable water, carbonated water and syrup.
[10] Brass bodied pumps for use with coffee, tea, or potable water only.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.


Facility : Sonora, Mexico


COMPONENTS:

207mm Co Mount Rotary Vane Pump[1]
  71(1)(2)(3)(4)(5)(6)(7)(8)(9)(10)(11)(12)
 
[1] (1)  Alphabetical or numeric character indicating series and housing type
    (2)  Alphabetical or numeric character indicating mounting and drive configuration
    (3)  Three digit number indicating flow rate in GPH
    (4)  Alphabetical character indicating elastomer 
    (5)  Number indicating rotation
    (6)  Number indicating clearance
    (7)  Alphabetical or numeric character indicating valve type and configuration
    (8)  Alphabetical or numeric character indicating pressure range
    (9)  Alphabetical or numeric character indicating pins and vanes
    (10) Reserved for future use
    (11) Reserved for future use
    (12) Three digit number indicating pressure setting in psi (optional)

215 Mag Drive Pump[2]
  319(1)(2)(3)(4)(5)(6)(7)(8)(9)(10)(11)
  31A(1)(2)(3)(4)(5)(6)(7)(8)(9)(10)(11)
 
[2] Models beginning with 313, 314, 317, 318, 319, and 31A are acceptable for use in potable
    water, carbonated water, alcohol less than 8% and milk. Models beginning with 311 and
    312 are acceptable with potable water only.
    (1)  A, H, or J indicating magnetic coupler material
    (2)  Two or Three digit number indicating flow rate
    (3)  Alphabetical character indicating Elastomer type
    (4)  Number indicating rotation direction
    (5)  Number indicating internal pump clearance
    (6)  A, B, C, D, F, G, P, R, T, or X indicating valve type and configuration
    (7)  Alphabetical character indicating pressure range
    (8)  Number indicating vane material and pin
    (9)  X or A indicating adapter type
    (10) Three digit number indicating motor information
    (11) Value of 0-250 psi

CMP-7000 Canned Motor Pump[3] [4]
  21(1)(2)(3)(4)(5)F(6)(7)(8)(9)(10)
  23(1)(2)(3)(4)(5)F(6)(7)(8)(9)(10)
 
[3] Models beginning with 21 and 23 are acceptable for potable water, carbonated water, and
    syrup.
    (1)  Alphabetical character indicating motor type.
    (2)  Number indicating cord type.
    (3)  Alphabetical character indicating motor capacitor location.
    (4)  Alphabetical character indicating housing description.
    (5)  Alphabetical character indicating flow rate. 
    (6)  Number indicating internal pump clearance.
    (7)  A, B, C, D, F, or G indicating valve type and configuration.
    (8)  Alphabetical character indicating pressure range.
    (9)  Digit indicating future use. 
    (10) Three digit number indicating alternate cord configuration.
[4] Pumps are intended to be installed in an unexposed non-food zone.

Gear Pump[5]
  5 (1)(2)(3)(4)(8)(5)(6)(7)XX(9)
 
[5] Suffixes indicate the following:
    (1)  1 or 3 indicating NSF approval
    (2)  Alphabetical or numeric character indicating motor power and voltage
    (3)  Number indicating cord type
    (4)  Alphabetical character indicating housing material and port configuration
    (5)  Alphabetical character indicating elastomer type
    (6)  Number indicating rotation direction
    (7)  Alphabetical character indicating pump style
    (8)  Alphabetical character indicating flow rate
    (9)  Three digits motor designation 
    (XX) Reserved for future use

Mag Drive Pump[2]
  31(1)(2)(3)(4)(5)(6)(7)(8)(9)(10)(11)
 
[2] Models beginning with 313, 314, 317, 318, 319, and 31A are acceptable for use in potable
    water, carbonated water, alcohol less than 8% and milk. Models beginning with 311 and
    312 are acceptable with potable water only.
    (1)  A, H, or J indicating magnetic coupler material
    (2)  Two or Three digit number indicating flow rate
    (3)  Alphabetical character indicating Elastomer type
    (4)  Number indicating rotation direction
    (5)  Number indicating internal pump clearance
    (6)  A, B, C, D, F, G, P, R, T, or X indicating valve type and configuration
    (7)  Alphabetical character indicating pressure range
    (8)  Number indicating vane material and pin
    (9)  X or A indicating adapter type
    (10) Three digit number indicating motor information
    (11) Value of 0-250 psi

Motor Pump - 3” Pumps[6]
  41(1)(2)B(3)F(4)(5)(6)(7)(8)
  41(1)(2)D(3)F(4)(5)(6)(7)(8)
  43(1)(2)B(3)F(4)(5)(6)(7)(8)
  43(1)(2)D(3)F(4)(5)(6)(7)(8)
 
[6] Models beginning with 41 or 43 are acceptable for potable water and syrup.
    (1) Alphabetical character indicating motor type.
    (2) Number indicating cord type.
    (3) Alphabetical character indicating flow rate.
    (4) Number indicating internal pump clearance.
    (5) A, B, C, D, F, G, H, J, K, L, M, N, or P indicating valve type and configuration.
    (6) Alphabetical character indicating pressure range.
    (7) Digit indicating future use.
    (8) Three digit number indicating alternate cord configuration.

Motor Pump - Microvane Pumps[7]
  61(1)(2)A(3)F(4)(5)(6)(7)(8)
  61(1)(2)D(3)F(4)(5)(6)(7)(8)
  61(1)(2)E(3)F(4)(5)(6)(7)(8)
  61(1)(2)F(3)F(4)(5)(6)(7)(8)
 
[7] Models 61xxAxFxxxxx are acceptable for potable water contact, carbonated water, syrup,
    and milk.  Models 61xxBxFxxxxx are acceptable for potable water contact.
    (1) Alphabetical character indicating motor type.
    (2) Number indicating cord type.
    (A) Alphabetical character indicating housing material and port configuration.
    (3) Alphabetical character indicating flow rate.
    (4) Number indicating pump rotation direction.
    (5) Alphabetical character indicating valve type and configuration.
    (6) Alphabetical character indicating pressure range.
    (7) Alphabetical character indicating pump configuration.
    (8) Three digit number indicating pressure setting in psi.

Rotary Vane Pump[8]
  10603[9]
  10604[9]
  10605[9]
  10606[9]
  10607[9]
  10776[9]
  11(7)(1)(2)(A)(3)(4)(5)(6)[10]
  11(7)(1)(2)(A)(3)(4)(5)(6)[10] [Pb]
  11(7)(1)(2)(A)(3)(4)(5)(6)[9]
  14(7)(1)(2)(A)(3)(4)(5)(6)[10]
  14(7)(1)(2)(A)(3)(4)(5)(6)[10] [Pb]
  15(7)(1)(2)(A)(3)(4)(5)(6)[10]
 
[8] (1) Alphabetical character indicating mounting and drive configuration.
    (2) Three digit number indicating flow rate in GPH.
    (3) Number indicating rotation, slinger, vanes or vane-pins.
    (4) Number indicating clearance.
    (5) Alphabetical or numeric character indicating valve type and configuration.
    (6) Alphabetical or numeric character indicating pressure range.
    (7) Alphabetical or numeric character indicating series and housing type.
    (A) Alphabetical character indicating elastomer.
[9] Stainless steel bodied pumps for use with potable water, carbonated water and syrup.
[10] Brass bodied pumps for use with coffee, tea, or potable water only.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.


Number of matching Manufacturers is 1
Number of matching Products is 54
Processing time was 0 seconds