NSF Product and Service Listings

These NSF Official Listings are current as of Friday, May 9, 2025 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/DWTU/Listings.asp?Standard=401&Company=03400&

Note: Certain claims, such as Arsenic (Pentavalent) Reduction, appear as active links, allowing you to access additional information regarding the specific contaminants.

NSF/ANSI 401
Drinking Water Treatment Units - Emerging Compounds/Incidental Contaminants


 
Solventum Purification Inc. 
400 Research Parkway
Meriden, CT 06450 
United States 
800-222-7880 
651 737 1374
Visit this company's website

Facility : Stafford Springs, CT

  Replacement Service Cycle Flow Rate  
Brand Name / Trade Name / Model Element (gallons) (gpm)   Claim

Plumbed-In [Pb]
SGLP2-BL HF20
HF37		 (1) 1.5   Microplastics Reduction

   
(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.


Facility : New Ulm, MN

  Replacement Service Cycle Flow Rate  
Brand Name / Trade Name / Model Element (gallons) (gpm)   Claim

Commercial Modular
DWMX1 MX-60 (1) 3.34   Microplastics Reduction
High Flow Series[3] [4] [5] HF30 (1) 1.67   Microplastics Reduction
High Flow Series[3] [4] [5] HF30-MS (1) 1.67   Microplastics Reduction
High Flow Series[3] [4] [5] HF30-S (1) 1.67   Microplastics Reduction
High Flow Series[3] [4] [5] HF20-S (1) 1.5   Microplastics Reduction
High Flow Series[3] [4] [5] HF40 (1) 2.5   Microplastics Reduction
High Flow Series[3] [4] [5] HF45-CLX (1) 2.5   Microplastics Reduction
High Flow Series[3] [4] [5] HF60 (1) 3.34   Microplastics Reduction
High Flow Series[3] [4] [5] HF60-CL (1) 2.2   Microplastics Reduction
High Flow Series[2] [3] HF10-I (1) 1   Microplastics Reduction
High Flow Series[3] [4] [5] C1-652 (1) 2.1   Microplastics Reduction
High Flow Series[3] [4] [5] C1-952 (1) 2.5   Microplastics Reduction
High Flow Series[3] [4] [5] HF10-MS (1) 1   Microplastics Reduction
High Flow Series[3] [4] [5] HF20-I (1) 1.67   Microplastics Reduction
High Flow Series[3] [4] [5] HF20-MS (1) 1.5   Microplastics Reduction
High Flow Series[3] [4] [5] HF20-SI (1) 1.67   Microplastics Reduction
High Flow Series[3] [4] [5] HF60-CLS (1) 2.2   Microplastics Reduction
High Flow Series[3] [4] [5] HF60-CLX (1) 3.5   Microplastics Reduction
High Flow Series[3] [4] [5] HF60-CLXS (1) 3.5   Microplastics Reduction
High Flow Series[3] [4] [5] HF60-S (1) 3.34   Microplastics Reduction
High Flow Series[3] [4] [5] HF90 (1) 5   Microplastics Reduction
High Flow Series[3] [4] [5] HF90-CLX (1) 5   Microplastics Reduction
High Flow Series[3] [4] [5] HF90-S (1) 5   Microplastics Reduction
High Flow Series[3] [4] [5] HF90-S-SR (1) 5   Microplastics Reduction
High Flow Series[3] [4] [5] HF90-S-SR5 (1) 5   Microplastics Reduction
High Flow Series[3] [4] [5] HF95-CL (1) 2.5   Microplastics Reduction
High Flow Series[3] [4] [5] HF60-S-SR (1) 3.5   Microplastics Reduction
High Flow Series[3] [4] [5] HF40-S-SR (1) 2.5   Microplastics Reduction
High Flow Series[3] [4] [5] HF20-S-SR (1) 2   Microplastics Reduction
High Flow Series[3] [4] [5] HF20-A020-S-SR (1) 2   Microplastics Reduction
High Flow Series[3] [4] [5] HF60-A020-S-SR (1) 3.5   Microplastics Reduction
High Flow Series[3] [4] [5] HF90-SR (1) 5   Microplastics Reduction
High Flow Series[3] [4] [5] HF20 (1) 1.5   Microplastics Reduction
High Flow Series[3] [4] [5] HF40-S (1) 2.5   Microplastics Reduction
High Flow Series[3] [4] [5] HF60-S-SR5 (1) 3.34   Microplastics Reduction
High Flow Series[3] [4] [5] HF20-A020-SR (1) 2   Microplastics Reduction
High Flow Series BEV[7] HF60 (1) 3.34   Microplastics Reduction
High Flow Series BEV[7] HF90 (1) 5   Microplastics Reduction
High Flow Series BEV[7] HF10-MS (1) 1   Microplastics Reduction
High Flow Series BEV[7] HF20-MS (1) 1.5   Microplastics Reduction
High Flow Series BEV[7] HF30 (1) 1.67   Microplastics Reduction
High Flow Series BEV[7] HF20-I (1) 1.67   Microplastics Reduction
High Flow Series BEV[7] HF40 (1) 2.5   Microplastics Reduction
High Flow Series Ice[7] HF20-A020-S-SR (1) 2   Microplastics Reduction
High Flow Series Ice[7] HF90-S (1) 5   Microplastics Reduction
High Flow Series Ice[7] HF20-S-SR (1) 2   Microplastics Reduction
High Flow Series Ice[7] HF40-S (1) 2.5   Microplastics Reduction
High Flow Series Ice[7] HF20-S (1) 1.5   Microplastics Reduction
High Flow Series Ice[7] HF60-S-SR (1) 3.5   Microplastics Reduction
High Flow Series Ice[7] HF60-S (1) 3.34   Microplastics Reduction
High Flow Series Ice[7] HF20-SI (1) 1.67   Microplastics Reduction
High Flow Series Ice[7] HF60-A020-S-SR (1) 3.5   Microplastics Reduction
SEB Professional 96.1000.0124 (1) 2.5   Microplastics Reduction

   
(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[2] Available with the VH3 series heads (as molded, with plug or with gauge).
[3] Available with the HN3, NH3, or VH3 series heads (as molded, with plug or with gauge).
        (1) Indicates approved for use with the High Flow Series Triple Manifold.
        (2) Indicates approved for use with the High Flow Series DF1XX Manifold.
        (3) Indicates approved for use with the High Flow Series Twin Manifold.
        (4) Indicates approved for use with the High Flow Series DF2XX Manifold.
        (5) Indicates approved for use with the High Flow Series DP1XX Manifold.
        (6) Indicates approved for use with the High Flow Series DP2XX Manifold.
        (7) Indicates approved for use with the High Flow Series DP3XX Manifold.
        (8) Indicates approved for use with the High Flow Series SF1XX Manifold.
        (9) Indicates approved for use with the High Flow Series DIDF2XX Manifold.
        (10) Indicates approved for use with the High Flow Series DIDF1XX Manifold.
        (11) Indicates approved for use with the High Flow Series DPP3XX Manifold.
        (12) Indicates approved for use with the High Flow Series HFP3XX Manifold.
[4] SH-EXP can be used with any of the following: High Flow Series Manifolds, the High Flow
        Series Triple, DF1XX, Twin, DF2XX, DP1XX, DP2XX, DP3XX, or SF1XX Manifold.
[5] HF190-SR can be used with the DP3XX Manifold.
[7] Available with the NH3 or VH3 series heads (as molded, with plug or with gauge).

Plumbed-In [Pb]
3MDW201 3MDW211 (1) 2.5   Microplastics Reduction
3MDW301[G] 3MDW311 1000(1) .75   Atenolol Reduction
Bisphenol A Reduction
Carbamazepine Reduction
DEET Reduction
Estrone Reduction
Linuron Reduction
Naproxen Reduction
Nonylphenol Reduction
Phenytoin Reduction
Trimethoprim Reduction
Ibuprofen Reduction
Meprobamate Reduction
Metolachlor Reduction
Microplastics Reduction
3MFF100 3MFF101 (1) 2.5   Microplastics Reduction
3US-MAX-S01[G] 3US-MAX-F01 1500(1) 1.5   Atenolol Reduction
Bisphenol A Reduction
Carbamazepine Reduction
DEET Reduction
Estrone Reduction
Linuron Reduction
Microplastics Reduction
Naproxen Reduction
Nonylphenol Reduction
Phenytoin Reduction
Trimethoprim Reduction
3US-MAX-S01H[G] 3US-MAX-F01H 1500(1) 1.5   Atenolol Reduction
Bisphenol A Reduction
Carbamazepine Reduction
DEET Reduction
Estrone Reduction
Linuron Reduction
Microplastics Reduction
Naproxen Reduction
Nonylphenol Reduction
Phenytoin Reduction
Trimethoprim Reduction
3US-PS01 3US-PF01 (1) 2.25   Microplastics Reduction
3US-PS01H 3US-PF01H (1) 2.25   Microplastics Reduction
AP Easy Cyst-FF C-Cyst-FF (1) 1.5   Microplastics Reduction
AP-DWS1000 AP-DW80
AP-DW90		 (1) 0.6   Microplastics Reduction
AP-DWS1000 LF AP-DW80
AP-DW90		 (1) 0.6   Microplastics Reduction
ATIFF6000 ATIFF6001 (1) 2.5   Microplastics Reduction
Aramark Gold[G] Gold (1) 0.75   Microplastics Reduction
Aramark Platinum [G] Platinum 1000(1) 0.75   Microplastics Reduction
Aramark Silver [G] Silver 1500(1) 1   Microplastics Reduction
BUNN EQHP-25L[G] EQHP-25LCRTG (1) 2.1   Microplastics Reduction
Better Waters XL7000[G] XL7000CR (1) 2.5   Microplastics Reduction
Body Glove BG-1000[G] BG-1000C (1) 0.6   Microplastics Reduction
Body Glove BG-12000 BG-12000C 1000(1) .75   Phenytoin Reduction
Ibuprofen Reduction
Naproxen Reduction
Estrone Reduction
Bisphenol A Reduction
Nonylphenol Reduction
Meprobamate Reduction
Atenolol Reduction
Carbamazepine Reduction
DEET Reduction
Metolachlor Reduction
Trimethoprim Reduction
Linuron Reduction
Microplastics Reduction
Body Glove BG-3000[G] BG-3000C (1) 0.75   Microplastics Reduction
Body Glove BG-6000FF BG-6000FFC (1) 2.5   Microplastics Reduction
Cyst-FF C-Cyst-FF (1) 1.5   Microplastics Reduction
DP290-M HF90-M (1) 10   Microplastics Reduction
DP390-M HF90-M (1) 15   Microplastics Reduction
DWS160-L[G] 160-L (1) 2.5   Microplastics Reduction
FF-6000 FF-6000R (1) 2.5   Microplastics Reduction
FM 1500-B[G] 47-5574707 (1) 0.6   Microplastics Reduction
FM DWS 1500[G] FM 1500 (1) 0.6   Microplastics Reduction
S004 3US-F004-5 (1) 1.5   Microplastics Reduction
SW-Complete (Beverage) SW-SR-60 (1) 4.4   Microplastics Reduction
SW-Complete (Ice) SW-SR-60 (1) 3.34   Microplastics Reduction
SW260-Plus SW-CRF-60 (1) 4.4   Microplastics Reduction
SW260-Plus SW-SR-60 (1) 3.34   Microplastics Reduction
True Platinum Platinum 855885 (1) 3.34   Microplastics Reduction
True Standard Standard 855884 (1) 1.67   Microplastics Reduction
VH3/CC350[G] CC350 (1) 1   Microplastics Reduction
VH3/HC350-S HC350-S (1) 1   Microplastics Reduction
VH3/OWS120-L[G] OWS120-L (1) 0.6   Microplastics Reduction
VH3/VEN350-K[G] VEN350-K (1) 1   Microplastics Reduction

   
(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

Plumbed-In to Separate Tap
3MDW301-F 3MDW311 1000(1) .75   Bisphenol A Reduction
Estrone Reduction
Ibuprofen Reduction
Naproxen Reduction
Nonylphenol Reduction
Phenytoin Reduction
Meprobamate Reduction
Microplastics Reduction
Atenolol Reduction
Carbamazepine Reduction
DEET Reduction
Metolachlor Reduction
Trimethoprim Reduction
Linuron Reduction

   
(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.


[6] Available options: 
        (1) 2.1
        (2) 1.7
        (3) 1.0

Facility : Guangzhou, China

  Replacement Service Cycle Flow Rate  
Brand Name / Trade Name / Model Element (gallons) (gpm)   Claim

Commerical Modular
High Flow Series[2] [3] HF10-I 3000(1) 1   Microplastics Reduction
ScaleGard High Flux Reverse Osmosis[2] 2 - SG-HFRO M28
SG-HFRO P20-SI		 (1) 2   Microplastics Reduction
ScaleGard High Flux Reverse Osmosis[2] 2 - SG-HFRO M18
SG-HFRO P10-S		 (1) 2   Microplastics Reduction
ScaleGard High Flux Reverse Osmosis[2] SG-HFRO M28
SG-HFRO P20-SI		 (1) 2   Microplastics Reduction
ScaleGard High Flux Reverse Osmosis[2] SG-HFRO M18
SG-HFRO P10-SI		 (1) 2   Microplastics Reduction

   
(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[2] Model is a reverse osmosis system and is also Certified to NSF/ANSI Standard 58.
[3] Available with the HN3, NH3, or VH3 series heads (as molded, with plug or with gauge).
    (1) Indicates approved for use with the High Flow Series Triple Manifold.
    (2) Indicates approved for use with the High Flow Series DF1XX Manifold.
    (3) Indicates approved for use with the High Flow Series Twin Manifold.
    (4) Indicates approved for use with the High Flow Series DF2XX Manifold.
    (5) Indicates approved for use with the High Flow Series DP1XX Manifold.
    (6) Indicates approved for use with the High Flow Series DP2XX Manifold.
    (7) Indicates approved for use with the High Flow Series DP3XX Manifold.
    (8) Indicates approved for use with the High Flow Series SF1XX Manifold.
    (9) Indicates approved for use with the High Flow Series DIDF2XX Manifold.
    (10) Indicates approved for use with the High Flow Series DIDF1XX Manifold.
    (11) Indicates approved for use with the High Flow Series DPP3XX Manifold.
    (12) Indicates approved for use with the High Flow Series HFP3XX Manifold.

Plumbed-In
AP Easy LC[G] C-LC 750(1) .75   Atenolol Reduction
Bisphenol A Reduction
Carbamazepine Reduction
DEET Reduction
Estrone Reduction
Linuron Reduction
Microplastics Reduction
Nonylphenol Reduction
Trimethoprim Reduction

   
(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.


Facility : Nuevo Leon, Mexico

  Replacement Service Cycle Flow Rate  
Brand Name / Trade Name / Model Element (gallons) (gpm)   Claim

Plumbed-In
3US-S003-5 3US-F003-5 750 .75   Atenolol Reduction
Bisphenol A Reduction
Carbamazepine Reduction
DEET Reduction
Estrone Reduction
Linuron Reduction
Microplastics Reduction
Nonylphenol Reduction
Trimethoprim Reduction
AP Easy Complete [G] C-Complete 750(1) .75   Atenolol Reduction
Bisphenol A Reduction
Carbamazepine Reduction
DEET Reduction
Estrone Reduction
Linuron Reduction
Microplastics Reduction
Nonylphenol Reduction
Trimethoprim Reduction
AP Easy LC[G] C-LC 750(1) .75   Atenolol Reduction
Bisphenol A Reduction
Carbamazepine Reduction
DEET Reduction
Estrone Reduction
Linuron Reduction
Microplastics Reduction
Nonylphenol Reduction
Trimethoprim Reduction
AP Easy LC Cooler[G] C-LC 750(1) .75   Atenolol Reduction
Bisphenol A Reduction
Carbamazepine Reduction
DEET Reduction
Estrone Reduction
Linuron Reduction
Microplastics Reduction
Nonylphenol Reduction
Trimethoprim Reduction
AP2-C401- G C401-G (1) .5   Microplastics Reduction
AP2-C401-SG C401-SG (1) .5   Microplastics Reduction
AP2-C405-G C405-G (1) .5   Microplastics Reduction
AP2-C405-SG C405-SG (1) .5   Microplastics Reduction
Complete C-Complete 750(1) .75   Atenolol Reduction
Bisphenol A Reduction
Carbamazepine Reduction
DEET Reduction
Estrone Reduction
Linuron Reduction
Microplastics Reduction
Nonylphenol Reduction
Trimethoprim Reduction
Complete Cooler[G] C-Complete 750(1) .75   Atenolol Reduction
Bisphenol A Reduction
Carbamazepine Reduction
DEET Reduction
Estrone Reduction
Linuron Reduction
Microplastics Reduction
Nonylphenol Reduction
Trimethoprim Reduction
DS03 3DS-F003-5 750 .75   Atenolol Reduction
Bisphenol A Reduction
Carbamazepine Reduction
DEET Reduction
Estrone Reduction
Linuron Reduction
Microplastics Reduction
Nonylphenol Reduction
Trimethoprim Reduction
LC[G] C-LC 750(1) .75   Atenolol Reduction
Bisphenol A Reduction
Carbamazepine Reduction
DEET Reduction
Estrone Reduction
Linuron Reduction
Microplastics Reduction
Nonylphenol Reduction
Trimethoprim Reduction
LC Cooler[G] C-LC 750(1) .75   Atenolol Reduction
Bisphenol A Reduction
Carbamazepine Reduction
DEET Reduction
Estrone Reduction
Linuron Reduction
Microplastics Reduction
Nonylphenol Reduction
Trimethoprim Reduction
S003 DIY 3DS-F003-5 750 .75   Atenolol Reduction
Bisphenol A Reduction
Carbamazepine Reduction
DEET Reduction
Estrone Reduction
Linuron Reduction
Microplastics Reduction
Nonylphenol Reduction
Trimethoprim Reduction

   
(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Number of matching Manufacturers is 1
Number of matching Products is 113
Processing time was 0 seconds