NSF Product and Service Listings

These NSF Official Listings are current as of Wednesday, December 4, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/DWTU/Listings.asp?Standard=042&Company=42930&

Note: Certain claims, such as Arsenic (Pentavalent) Reduction, appear as active links, allowing you to access additional information regarding the specific contaminants.

NSF/ANSI 42
Drinking Water Treatment Units - Aesthetic Effects

 
Specialty Mfg. Co. 
5858 Centerville Road
St. Paul, MN 55127 
United States 
612-653-0599
Visit this company's website

Facility : St. Paul, MN

 
           

COMPONENTS: Valves, Ball[1] [Pb]
FP 637-(1)(2)(1)(2)-(4)(5)[2]  
FP 639-(1)(2)(3)(2)(3)(2)-(4)(5)[3]  
PVC 226-(1)(2)(1)(2)-(4)(5)[4]  
PVC 326-(1)(2)(3)(2)(3)(2)-(4)(5)[5]  
PVC 637-(1)(2)(1)(2)-(4)(5)[2]  
PVC 638-(1)(2)(1)(2)-(4)(5)[6]  
PVC 639-(1)(2)(3)(2)(3)(2)-(4)(5)[3]  
PVC 657-(1)(2)(1)(2)-(4)(5)[6]  
PVC 689-(1)(2)(3)(6)(3)(6)-(4)(5)[7]  
WFP 226-(1)(2)(1)(2)-(4)(5)[4]  
WFP 326-(1)(2)(3)(2)(3)(2)-(4)(5)[5]  
WFP 637-(1)(2)(1)(2)-(4)(5)[2]  
WFP 638-(1)(2)(1)(2)-(4)(5)[6]  
WFP 639-(1)(2)(3)(2)(3)(2)-(4)(5)[3]  
WFP 657-(1)(2)(1)(2)-(4)(5)[6]  
WPVC 226-(1)(2)(1)(2)-(4)(5)[4]  
WPVC 326-(1)(2)(3)(2)(3)(2)-(4)(5)[5]  
WPVC 637-(1)(2)(1)(2)-(4)(5)[2]  
WPVC 638-(1)(2)(1)(2)-(4)(5)[6]  
WPVC 639-(1)(2)(3)(2)(3)(2)-(4)(5)[3]  
WPVC 657-(1)(2)(1)(2)-(4)(5)[6]  

   
[1] Conforms to material and structural requirements only.
[2] Suffixes indicate optional sizes and fitting types:
    Material Options: FP - Black Glass Filled Polypropylene, PVC - Gray PVC, WPVC - White
    PVC, WFP - White Glass Filled Polypropylene 
    (1) Inlet/Outlet end: 2 - 1/8" (2/16), 4 - 1/4" (4/16), 6 - 3/8" (6/16), 8 - 1/2"
        (8/16)
    (2) Fitting Type: F - Female NPT (1/4", 3/8", 1/2"), M - Male NPT (1/8", 1/4",
        3/8", 1/2"), BIB - Smooth (Stem) Barb (3/8"), B - Hose Barb (1/8", 1/4",
        3/8", 1/2"), SMC - Push-to-connect (1/4", 3/8", 1/2"), TB - Tapered Barb
        (3/8", 5/8"), 4CJ - 1/4" Compression JACO, 6CJ - 3/8" Compression JACO
    (4) Seal Type: (E - Ethylene Propylene) 
    (5) Handle and Panel Mount Options (non-wetted)
[3] Suffixes indicate optional sizes and fitting types:
    Material Options: FP - Black Polypropylene, WFP - White Polypropylene, PVC - Gray PVC,
    WPVC - White PVC
    (1) Inlet/Outlet end: 2 - 1/8" (2/16), 4 - 1/4" (4/16), 6 - 3/8" (6/16), 8 - 1/2"
        (8/16)
    (2) Fitting Type: F - Female NPT (1/4", 3/8", 1/2"), M - Male NPT (1/8", 1/4", 
        3/8"), BIB - Smooth (Stem) Barb (3/8"), CjG - Collets John Guest, B - Hose Barb 
        (1/8", 1/4", 3/8", 1/2"), SMC - Push-to-connect (1/4", 3/8"), TB - Tapered Barb, 
        DM - DM Fit Collets, SSR - Female NPT w/Stainless Steel Support Ring (1/2")
    (3) Outlet end (3-way only): 2 - 1/8" (2/16), 4 - 1/4" (4/16), 6 - 3/8" (6/16), 8 - 1/2"
        (8/16)
    (4) Seal Type: E - Ethylene Propylene
    (5) Handle and Panel Mount Options (non-wetted)
[4] Suffixes indicate optional sizes and fitting types:
    Material Options: WFP - White Polypropylene, PVC - Gray PVC, WPVC - White PVC
    (1) Inlet/Outlet end: 2 - 1/8" (2/16), 4 - 1/4" (4/16), 5 - 5/16" (5/16), 6 - 3/8"
        (6/16), 8 - 1/2" (8/16)
    (2) Fitting Type: F - Female NPT (1/8", 1/4"), M - Male NPT (1/8", 1/4"), 
        BIB - Smooth (Stem) Barb (3/8", 1/2"), CjG - Collets John Guest, B - Hose 
        Barb (1/8", 1/4", 5/16", 3/8", 1/2"), SMC - Push-to-connect (1/4", 3/8"), 
        DM - DM Fit Collets
    (4) Seal Type: E - Ethylene Propylene
    (5) Handle and Panel Mount Options (non-wetted)
[5] Suffixes indicate optional sizes and fitting types:
    Material Options: WFP - White Polypropylene, PVC - Gray PVC, WPVC - White PVC
    (1) Inlet/Outlet end: 2 - 1/8" (2/16), 4 - 1/4" (4/16), 5 - 5/16" (5/16), 6 - 3/8" 
        (6/16), 8 - 1/2" (8/16)
    (2) Fitting Type: F - Female NPT (1/8", 1/4"), M - Male NPT (1/8", 1/4"), 
        BIB - Smooth (Stem) Barb (3/8", 1/2"), CjG - Collets John Guest, B - Hose Barb 
        (1/8", 1/4", 5/16", 3/8", 1/2"), SMC - Push-to-connect (1/4", 3/8"), DM - DM 
        Fit Collets
    (3) Outlet end (3-way only): 2 - 1/8" (2/16), 4 - 1/4" (4/16), 5 - 5/16" (5/16), 
        6 - 3/8" (6/16), 8 - 1/2" (8/16)
    (4) Seal Type: E - Ethylene Propylene
    (5) Handle and Panel Mount Options (non-wetted)
[6] Suffixes indicate optional sizes and fitting types:							
    Material Options: WFP - White Polypropylene, PVC - Gray PVC, WPVC - White PVC
    (1) Inlet/Outlet end: 2 - 1/8" (2/16), 4 - 1/4" (4/16), 6 - 3/8" (6/16), 8 - 1/2" 
        (8/16)
    (2) Fitting Type: F - Female NPT (1/4", 3/8", 1/2"), M - Male NPT (1/8", 1/4", 
        3/8"), BIB - Smooth (Stem) Barb (3/8"), CjG - Collets John Guest, B - Hose 
        Barb (1/8", 1/4", 3/8", 1/2"), SMC - Push-to-connect (1/4", 3/8"), 
        TB - Tapered Barb, DM - DM Fit Collets, SSR - Female NPT w/Stainless Steel 
        Support Ring (1/2")
    (4) Seal Type: E - Ethylene Propylene
    (5) Handle and Panel Mount Options (non-wetted)
[7] Suffixes indicate optional sizes and fitting types:
    Material Options: PVC - Gray PVC
    (1) Inlet/Outlet end: 2 - 1/8" (2/16), 4 - 1/4" (4/16), 6 - 3/8" (6/16), 8 - 1/2" 
        (8/16)
    (2) Fitting Type: F - Female NPT (1/4", 3/8", 1/2"), M - Male NPT (1/8", 1/4", 
        3/8"), BIB - Smooth (Stem) Barb (3/8"), CjG - Collets John Guest, B - Hose 
        Barb (1/8", 1/4", 3/8", 1/2"), SMC - Push-to-connect (1/4", 3/8"), TB - 
        Tapered Barb, DM - DM Fit Collets, SSR - Female NPT w/Stainless Steel Support
        Ring (1/2")
    (3) Outlet end (3-way only): 4 - 1/4" (4/16), 6 - 3/8" (6/16), 8 - 1/2" (8/16), 
        12 - 3/4" (12/16)
    (4) Seal Type: E - Ethylene Propylene
    (5) Handle and Panel Mount Options (non-wetted)
    (6) T-Link End Fitting Type: M-NPT (1/2" Male x 1/2" Male, 3/4"’ Male x 3/4" 
        Male), NPSM - National Pipe Straight Mechanical (1/2" Female x 1/2" Male), 
        QEST - QEST brand system (includes plastic nut, stainless steel ring and cone) 
        (1/4", 3/8", 1/2")
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

COMPONENTS: Valves, Check[1] [Pb]
PVC CHK 426-(1)(2)(3)(2)-(4)(7)[8]  
WFP CHK 426-(1)(2)(3)(2)-(4)(7)[8]  
WPVC CHK 426-(1)(2)(3)(2)-(4)(7)[8]  

   
[1] Conforms to material and structural requirements only.
[8] Suffixes indicate optional sizes and fitting types:
    Material Options: WFP - White Polypropylene, PVC - Gray PVC, WPVC - White PVC
    (1) Inlet/Outlet end: 2 - 1/8" (2/16), 4 - 1/4" (4/16), 5 - 5/16" (5/16), 6 - 3/8" 
        (6/16), 8 - 1/2" (8/16)
    (2) Fitting Type: F - Female NPT (1/8", 1/4"), M - Male NPT (1/8", 1/4"), 
        BIB - Smooth (Stem) Barb (3/8"), CjG - Collets John Guest, B - Hose Barb (1/8", 
        1/4", 5/16", 3/8", 1/2"), SMC - Push-to-connect (1/4", 3/8"), 
        DM - DM Fit Collets
    (3) Outlet end (3-way only): 2 - 1/8" (2/16), 4 - 1/4" (4/16), 5 - 5/16" (5/16), 6 - 
          3/8" (6/16), 8 - 1/2" (8/16)
    (4) Seal Type: E - Ethylene Propylene
    (5) Handle and Panel Mount Options (non-wetted)
    (7) Spring and Ball Material: 1/3# SS Spring and SS Ball (1/3 psi), 1/3#, TEF SS Spring
        and PTFE Ball (1/3 psi), None SS Spring and SS Ball (1 psi), TEF SS Spring and PTFE
        Ball (1 psi), 1.5# SS Spring and SS Ball (1.5 psi), 1.5#, TEF SS Spring and PTFE
    Ball
        (1.5 psi), 3# SS Spring and SS Ball (3 psi), 3#, TEF SS Spring and PTFE Ball (3
    psi),
        5# SS Spring and SS Ball(5 psi), 5#, TEF SS Spring and PTFE Ball (5 psi), 7# SS
        Spring and SS Ball (7 psi), 7#, TEF SS Spring and PTFE Ball (7 psi), 10# SS Spring
        and SS Ball (10 psi), 10#, TEF SS Spring and PTFE Ball (10 psi), 12# SS Spring and
        SS Ball (12 psi), 12#, TEF SS Spring and PTFE Ball (12 psi), 15# SS Spring and SS
        Ball (15 psi), 15#, TEF SS Spring and PTFE Ball (15 psi)
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

COMPONENTS: Valves, Rotary[1] [Pb]
PVC 658-(1)(2)(1)(2)-(4)(5)[9]  
WFP 658-(1)(2)(1)(2)-(4)(5)[9]  
WPVC 658-(1)(2)(1)(2)-(4)(5)[9]  

   
[1] Conforms to material and structural requirements only.
[9] Suffixes indicate optional sizes and fitting types:
    Material Options: WFP - White Polypropylene, PVC - Gray PVC, WPVC - White PVC
    (1) Inlet end: 4 - 1/4" (4/16)
    (2) Fitting Type: F - Female NPT (1/4"), SMC - Push-to-connect (1/4", 3/8")
    (3) Outlet end: 4 - 1/4" (4/16), 6 - 3/8" (6/16)
    (4) Seal Type: E - Ethylene Propylene
    (5) Handle and Panel Mount Options (non-wetted)
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

COMPONENTS: Valves, Trunnion[1] [Pb]
PVC 628-(1)(2)(1)(2)-(4)(5)[10]  
PVC 629-(1)(2)(3)(2)(3)(2)-(4)(5)[11]  

   
[1] Conforms to material and structural requirements only.
[10] Suffixes indicate optional sizes and fitting types:
     Material Options: PVC - Gray PVC
     (1) Inlet/Outlet end: 4 - 1/4" (4/16), 6 - 3/8" (6/16)
     (2) Fitting Type: F - Female NPT (1/4", 3/8"), M - Male NPT (1/4", 3/8")
     (4) Seal Type: E - Ethylene Propylene
     (5) Handle and Panel Mount Options (non-wetted)
[11] Suffixes indicate optional sizes and fitting types:
     Material Options: PVC - Gray PVC
     (1) Inlet/Outlet end: 4 - 1/4" (4/16), 6 - 3/8" (6/16)
     (2) Fitting Type: F - Female NPT (1/4", 3/8"), M - Male NPT (1/4", 3/8")
     (3) Outlet end (3-way only): 4 - 1/4" (4/16), 6 - 3/8" (6/16)
     (4) Seal Type: E - Ethylene Propylene
     (5) Handle and Panel Mount Options (non-wetted)
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

Number of matching Manufacturers is 1
Number of matching Products is 29
Processing time was 0 seconds