NSF Product and Service Listings

[1] Conforms to material and structural integrity requirements.
[ER] Softener Efficiency indicates that the softener achieves a minimum of 3,350 grains of
     hardness removed per pound of regenerant salt (477 grams of hardness removed per
     kilogram of regenerant salt), and also that it uses 5 gallons or less of regenerant
     water per 1,000 grains of hardness removed (18.9 liters or less of regenerant water per
     64.8 grams of hardness removed).
[HR] Hardness Reduction indicates that the published capacity ratings for reducing hardness
     have been verified.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.
[POE] Product conforms to NSF/ANSI/CAN 61 health effects requirements.

[1] Conforms to material and structural integrity requirements.

[1] Conforms to material and structural integrity requirements.
[ER] Softener Efficiency indicates that the softener achieves a minimum of 3,350 grains of
     hardness removed per pound of regenerant salt (477 grams of hardness removed per
     kilogram of regenerant salt), and also that it uses 5 gallons or less of regenerant
     water per 1,000 grains of hardness removed (18.9 liters or less of regenerant water per
     64.8 grams of hardness removed).
[HR] Hardness Reduction indicates that the published capacity ratings for reducing hardness
     have been verified.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.
[POE] Product conforms to NSF/ANSI/CAN 61 health effects requirements.

[1] Conforms to material and structural integrity requirements.
[2] All models listed may be available in a variety of colors, including but not limited to:
    natural, black, green, gray, blue, etc.
[10] The "x" in the trade name may be omitted.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

[1] Conforms to material and structural integrity requirements.
[3] The 65, 75, 85 indicate the model of the valves and may be followed by either a 0 or a 1
    and either an F or a T.
    The 0 models are for use with water softeners. 
    The 1 models are for use with in-line water filters.
    F indicates control valve with meter.
    T indicates control valve with timer.
    S indicates the valve is controlled by a microswitch.
    A complete model number example is "BNT 651F".
    BNT indicates control valve trade name for all world markets. 
    IWT/NVO/CAN models are sold in North America by Canature North America.
[4] The 89 indicates the model of the valves and may be followed by either a 0 or a 1 and
    either an F or a T.
    The 0 models are for use with water softeners. 
    The 1 models are for use with in-line water filters.
    F indicates control valve with meter.
    T indicates control valve with timer.
    A complete model number example is "BNT 891F".
    BNT indicates control valve trade name for all world markets.
[5] This product is Certified for a maximum use level of 0.05 units per L.
[6] The 95 indicates the model of the valves and may be followed by either a 0 or a 1 and
    either an F or a T.
    The 0 models are for use with water softeners.
    The 1 models are for use with in-line water filters.
    F indicates control valve with meter.
    T indicates control valve with timer.
    A complete model number example is "BNT 951F".
    BNT indicates control valve trade name for all world markets.
[7] This product is Certified for a maximum use level of 0.05 units per L.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

[1] Conforms to material and structural integrity requirements.
[8] The 105 indicates the model of the valves and may be followed by either a 0 or a 1 and
    either an F or a T.
    The 0 models are for use with water softeners. 
     The 1 models are for use with water filters.
     F indicates control valve with meter.
     T indicates control valve with timer.
     UF indicates up flow regeneration.
     DF indicates down flow regeneration.
[9] This product is certified for a maximum use level of 0.09 units per L.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.