NSF Product and Service Listings
These NSF Official Listings are current as of Wednesday, December 4, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/DWTU/Listings.asp?Standard=055&Company=C0432205&
Note: Certain claims, such as Arsenic (Pentavalent) Reduction, appear as active links, allowing you to access additional information regarding the specific contaminants.
NSF/ANSI 55
Ultraviolet Microbiological Water Treatment Systems
Ultraviolet Microbiological Water Treatment Systems
| AquiSense Technologies, LLC | |
| 4400 Olympic Boulevard | |
| Erlanger, KY 41018 | |
| United States | |
| 859-869-4700 | |
| Visit this company's website |
Facility : Erlanger, KY
|
COMPONENTS: LED UV[1] [Pb] |
||||||
| PearlAqua Micro PAQ-03B-55x-xxx-xxxx-S1xxN[2] [3] | ||||||
| PearlAqua Micro PAQ-06B-55x-xxx-xxxx-S1xxN[3] [4] | ||||||
| PearlAqua Micro PAQ-06C-55x-xxx-xxxx-S1xxN[3] [5] | ||||||
| PearlAqua Micro PAQ-09C-55x-xxx-xxxx-S1xxN[3] [6] | ||||||
| PearlAqua Micro PAQ-12C-55x-xxx-xxxx-S1xxN[3] [7] | ||||||
[1] Conforms to the material and structural integrity requirements only.
[2] Complies with NSF/ANSI 55 requirements for Disinfection Performance, Class B at a flow
rate of 0.5 LPM.
[3] "x" denotes build specifications. See manufacturer for details.
[4] Complies with NSF/ANSI 55 requirements for Disinfection Performance, Class B at a flow
rate of 1.0 LPM.
[5] Complies with NSF/ANSI 55 requirements for Disinfection Performance, Class B at a flow
rate of 1.2 LPM.
[6] Complies with NSF/ANSI 55 requirements for Disinfection Performance, Class B at a flow
rate of 1.8 LPM.
[7] Complies with NSF/ANSI 55 requirements for Disinfection Performance, Class B at a flow
rate of 2.4 LPM.
[Pb] Product also evaluated and determined to possess weighted average lead content of
<=0.25% and complies with lead content requirements for “lead free” plumbing as defined
by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
Water Act.
|
||||||
Number of matching Manufacturers is 1
Number of matching Products is 5
Processing time was 0 seconds
