NSF Product and Service Listings

These NSF Official Listings are current as of Friday, May 9, 2025 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/DWTU/Listings.asp?Standard=042&Company=C0600944&

Note: Certain claims, such as Arsenic (Pentavalent) Reduction, appear as active links, allowing you to access additional information regarding the specific contaminants.


NSF/ANSI 42
Drinking Water Treatment Units - Aesthetic Effects


 
Hydronix Water Technology 
8630 Rochester Avenue
Rancho Cucamonga, CA 91730 
United States 
909-527-6996
Visit this company's website

Facility : 1C

 
           

COMPONENTS: Filter Cartridges[1] [2] [Pb] [POE]
Sediment Bonded Cartridge (SBC-XX-YYZZ)[3]  
Sediment Bonded Cartridge (SBX-XX-YYZZ)[3]  
Sediment Bonded Cartridge (WW-SB-XXYYZZ)[4]  
Sediment Depth Cartridge (SDC-XX-YYZZ)[3]  
Sediment Depth Cartridge (SDX-XX-YYZZ)[3]  
Sediment Depth Cartridge (WW-SD-XXYYZZ)[4]  
Sediment Grooved Cartridge (SGC-XX-YYZZ)[3]  
Sediment Grooved Cartridge (SGX-XX-YYZZ)[3]  
Sediment Grooved Cartridge (WW-SG-XXYYZZ)[4]  
Sediment Wound Cartridge (SWC-XX-YYZZ)[3]  
Sediment Wound Cartridge (SWX-XX-YYZZ)[3]  

   
[1] Certified for material safety only.
[2] Certification does not include inner core, adapters, o-rings, gaskets, or end caps.
[3] A29:A43		
    Sediment Bonded Cartridge (SBX-XX-YYZZ) 		
    Sediment Grooved Cartridge (SGC-XX-YYZZ) 		
    Sediment Grooved Cartridge (SGX-XX-YYZZ) 		
    Sediment Depth Cartridge (SDC-XX-YYZZ) 		
    Sediment Depth Cartridge (SDX-XX-YYZZ) 		
    Sediment Wound Cartridge (SWC-XX-YYZZ) 		
    Sediment Wound Cartridge (SWX-XX-YYZZ) 		
        		
    XX -  1.5" – 8"  Diameter		
    YY - 2" – 60"  Length		
    ZZ - 0.5m – 200m  Micron Rating		
        		
    *Special lengths and diameters within the certified range are included in the
    certification such as 2 1/4" diameter and 30 1/4" length.		
    
[4] Sediment Bonded Cartridge (WW-SB-XXYYZZ) 		
    Sediment Grooved Cartridge (WW-SG-XXYYZZ) 		
    Sediment Depth Cartridge (WW-SD-XXYYZZ)		
    
    WW - Internal Code AA-ZZ 		
    XX - 1.5" – 8" Diameter 		
    YY - 2" – 60" Length 		
    ZZ - 0.5m – 200m Micron Rating		
        		
    *Special lengths and diameters within the certified range are included in the
    certification such as 2 1/4" diameter and 30 1/4" length.		
    
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.
[POE] Product conforms to NSF/ANSI/CAN 61 health effects requirements.

COMPONENTS: Filter Housings[5]
HF2-10WHWH12  
HF2-10WHWH14 10" x 1/4"  
HF2-10WHWH38 10" x 3/8"  
HF45-10BLBK15PR 1 1/2"  
HF45-10BLBK34PR  
HF5-10BLBK34PR  
MS040XXX[6]  
MS040YYY[6]  
QQQ-10BLXXYYZZ[7]  
QQQ-10WHXXYYZZ[7]  
QQQ-5BLXXYYZZ[7]  
QQQ-5WHXXYYZZ[7]  
QQQQ-10BKXXYYZZ[8]  
QQQQ-10BLXXYYZZ[8]  
QQQQ-10GRXXYYZZ[8]  
QQQQ-10WHXXYYZZ[8]  
QQQQ-20BKXXYYZZ[8]  
QQQQ-20BLXXYYZZ[8]  
QQQQ-20GRXXYYZZ[8]  
QQQQ-20WHXXYYZZ[8]  
QQQQW-10BKXXYYZZ[8]  
QQQQW-10BLXXYYZZ[8]  
QQQQW-10GRXXYYZZ[8]  
QQQQW-10WHXXYYZZ[8]  
QQQQW-20BKXXYYZZ[8]  
QQQQW-20GRXXYYZZ[8]  
QQQW-10BLXXYYZZ  
QQQW-10WHXXYYZZ  
QQQW-5BLXXYYZZ  
QQQW-5WHXXYYZZ  

   
[5] Conforms to material and structural integrity requirements only.
[6] MS040 - Series Code
    XXX - 956-957
    YYY - 954-955
[7] QQQ - Series Code AAA-ZZZ
    W - Custom Code
    5 - 5" Length
    10 - 10" Length
    BL - Blue Body Color
    WH - White Body Color
    XX - Cap Color
    YY - 1/4" - 3/4"
    ZZ - Pressure Relief
[8] QQQQ - Series Code AAAA-ZZZZ
    W - Custom Code
    10 - 10" Length
    20 - 20" Length
    BK - Black Body Color
    BL - Blue Body Color
    GR - Grey Body Color
    W - Custom Code
    XX - Cap Color
    YY - 3/4" - 1 1/5"
    ZZ - Pressure Relief

NOTE: These components do not bear the NSF Mark.  Evidence of the Certification will appear on
      the manufacturer's literature and packaging. 

Facility : 3C

 
           

COMPONENTS: Filter Cartridges[1] [G]
CB-XX-YYZZ[2] [3]  
HDG-CB-AC10[3] [4]  
HDG-CB6[3] [4]  
HDG-CB8[3] [4]  
HDG-CBXXP[3] [4]  
HDGT-CBXXP[3] [4]  
ICF-10  
ICF-2512  
ICF-6  
Sediment Bonded Cartridge (SBC-XXYYZZ)[5] [6]  
Sediment Bonded Cartridge (SBX-XXYYZZ)[5] [6]  
Sediment Bonded Cartridge (WW-SBXXYYZZ)[5] [7]  
Sediment Depth Cartridge (SDC-XXYYZZ)[5] [6]  
Sediment Depth Cartridge (SDX-XXYYZZ)[5] [6]  
Sediment Depth Cartridge (WW-SDXXYYZZ)[5] [7]  
Sediment Grooved Cartridge (SGC-XXYYZZ)[5] [6]  
Sediment Grooved Cartridge (SGX-XXYYZZ)[5] [6]  
Sediment Grooved Cartridge (WW-SGXXYYZZ)[5] [7]  
Sediment Wound Cartridge (SWC-XXYYZZ)[5] [6]  
Sediment Wound Cartridge (SWX-XXYYZZ)[5] [6]  

   
[1] Conforms to material requirements only.
[2] XX - 1.2-4.2 inch Outer Diameter, 0.5-2.0 inch Inner Diameter
    YY - 4-40 inch Length 			
    ZZ - 0.5 - 10 microns
[3] CB-2515-9-ZZ, HDG-2515-9P, and HDGT-2515-9P Tested in a system at a flow rate of 1.0 gpm
    to a capacity of 6,000 gal for the reduction of Chlorine and Taste & Odor per NSF/ANSI
    42.							
    CB-2515-10-ZZ and HDG-2515-AC10 Tested in a system at a flow rate of 1.0 gpm to a
    capacity of 6,000 gal for the reduction of Chlorine and Taste & Odor per NSF/ANSI 42
    CB-2515-20-ZZ, HDG-2515-20P, and HDGT-2515-20P  Tested in a system at a flow rate of 2.0
    gpm to a capacity of 12,000 gal for the reduction of Chlorine and Taste & Odor per
    NSF/ANSI 42							
     CB-2515-5-ZZ, HDG-2515-5P, and HDGT-2515-5P  Tested in a system at a flow rate of 0.5
    gpm to a capacity of 3,000 gal for the reduction of Chlorine and Taste & Odor per
    NSF/ANSI 42							
    CB-2515-9.5-ZZ, HDG-2515-9.5P, and HDGT-2515-9.5P  Tested in a system at a flow rate of
    1.0 gpm to a capacity of 5,600 gal for the reduction of Chlorine and Taste & Odor per
    NSF/ANSI 42							
    CB-2515-30-ZZ, HDG-2515-30P, and HDGT-2515-30P  Tested in a system at a flow rate of 3.0
    gpm to a capacity of 18,000 gal for the reduction of Chlorine and Taste & Odor per
    NSF/ANSI 42							
    CB-4020-10-ZZ, HDG-4020-10P, and HDGT-4020-10P  Tested in a system at a flow rate of 2.0
    gpm to a capacity of 14,000 gal for the reduction of Chlorine and Taste & Odor per
    NSF/ANSI 42							
    CB-4020-15-ZZ, HDG-4020-15P, and HDGT-4020-15P Tested in a system at a flow rate of 3.0
    gpm to a capacity of 21,000 gal for the reduction of Chlorine and Taste & Odor per
    NSF/ANSI 42							
    CB-4020-40-ZZ, HDG-4020-40P, and HDGT-4020-40P Tested in a system at a flow rate of 4.0
    gpm to a capacity of 24,000 gal for the reduction of Chlorine and Taste & Odor per
    NSF/ANSI 42							
    CB-4020-20-ZZ, HDG-4020-20P, and HDGT-4020-20P Tested in a system at a flow rate of 4.0
    gpm to a capacity of 28,000 gal for the reduction of Chlorine and Taste & Odor per
    NSF/ANSI 42 Inner Diameter of 1.2 inch has outer diameter of 2.5 inches, has length of
    5, 10, 20,30 or 40 inches. Inner Diameter of 1.5 inch has Outer Diameter of 1.5 inches,
    has length of 10 , 20,30 or 40 inches, Inner Diameter of 1.6 inches has Outer Diameter
    of 2.7 inches, has length of 10 or 20,30 or 40 inches, Inner Diameter of 2.0 inches has
    outer diameter of 4.0 inches, has length of 10, 20 inches.	
[4] CB - 1.2-4.2 inch Outer Diameter, 0.5-2.0 inch Inner Diameter 			
    XX - 4-40 inch Length 			
    P  - Post Filter
[5] Certification does not include inner core, adapters, o-rings, gaskets, or end caps.
[6] XX - 1.5" - 8" Diameter
    YY - 2" - 60" Length
    ZZ - 0.5m - 200m Micron Rating
[7] WW - Internal Code AA-ZZ
    XX - 1.5" – 8" Diameter
    YY - 2" – 60" Length
    ZZ - 0.5m – 200m Micron Rating
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

* Special lengths and diameters within the certified range are included in the
  certification such as 2 1/4" diameter and 30 1/4" length.
  

Number of matching Manufacturers is 1
Number of matching Products is 61
Processing time was 1 seconds