NSF Product and Service Listings

These NSF Official Listings are current as of Saturday, July 27, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/DWTU/Listings.asp?Standard=058&Company=C0734380&

Note: Certain claims, such as Arsenic (Pentavalent) Reduction, appear as active links, allowing you to access additional information regarding the specific contaminants.

NSF/ANSI 58
Reverse Osmosis Drinking Water Treatment Systems


 
Henan Beisen Environmental Technology Co., Ltd. 
Jinfeng Avenue East Section
Xiping Industrial Park, Xiping County 
Zhumadian, Henan 463911 
China 
86 396 363 9918

Facility : Zhumadian, Henan, China

             

COMPONENTS: Polyester Resin (PES)[1] [2] [Pb]
BS01-WT-22-280    
BS01-WTA-25-1016    
BS01-WTD-25-320    
BS01-WTD-30-508    
BS01-WTD-35-330    

   
[1] Certified for a maximum surface area to volume ratio of 650 square inches per Liter.
[2] Average thickness:
    BS01-WTA-25-1016: 0.25mm±0.02mm
    BS01-WTD-25-320: 0.25mm±0.02mm
    BS01-WT-22-280: 0.22mm±0.02mm
    BS01-WTD-35-330: 0.35mm±0.02mm
    BS01-WTD-30-508: 0.30mm±0.02mm
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

COMPONENTS: Polypropylene (PP)[1] [3] [Pb]
BS02-13-33    
BS02-17-16    
BS02-20-16    
BS02-31-09    
BS02-34-09    

   
[1] Certified for a maximum surface area to volume ratio of 650 square inches per Liter.
[3] Average thickness:
    BS02-13-33: 0.32mm±0.025mm
    BS02-17-16: 0.43mm±0.025mm
    BS02-20-16: 0.51mm±0.025mm
    BS02-31-09: 0.79mm±0.025mm
    BS02-34-09: 0.86mm±0.025mm
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

Number of matching Manufacturers is 1
Number of matching Products is 10
Processing time was 0 seconds