NSF Product and Service Listings

These NSF Official Listings are current as of Friday, June 19, 2026 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/DWTU/Listings.asp?Standard=042&Company=C0891270&

Note: Certain claims, such as Arsenic (Pentavalent) Reduction, appear as active links, allowing you to access additional information regarding the specific contaminants.

NSF/ANSI 42
Drinking Water Treatment Units - Aesthetic Effects

 
Thermo Fisher Scientific 
400 Research Parkway
Meriden, CT 06450 
United States 
651-413-3745

Facility : Meriden, CT

 
           

COMPONENTS: Filter Cartridges
BLA100B04XC BOTTLED WATER FILTER[1] [2] [3]  
LifeAssure BW BLA100B01BC[1] [2]  
LifeAssure BW BLA100B03BC[1] [2]  

   
[1] Conforms to material requirements.
[2] Cartridges require a 10 minute flushing procedure. Cartridges have been tested against
    Standard 53 requirements for cyst reduction specifically for Bottled Water applications
    at a flow rate of 3 gpm per 10" of cartridge length when installed with -222 and -226
    O-rings.
[3] X denotes the end cap modification which includes the following:
    B - 226 O-Ring w/ Spear
    C - 222 O-Ring w/ Spear
    F - 222 O-Ring w/ Flat Cap
    J - 226 O-Ring w/ Flat Cap


[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Facility : São Paulo, Brazil

 
           

COMPONENTS: Filter Cartridges[1]
3M Micro-Klean™ RT(LC)(GC)16XYZ(EMC)(OC)[2]  

   
[1] Conforms to material requirements only.
[2] LC -  Length 
          09 – 9" - 3/4" nominal 
          10 – 10" nominal 
          19 – 19" - 1/2" nominal
          20 – 20" nominal 
          29 – 29" - 1/4" nominal
          30 – 30" nominal 39 – 39" nominal 
          40 - 40" nominal
          49 – 49" nominal 
          50 – 50" nominal 
          59 – 59" nominal 
          60 – 60" nominal 
          62 – 62" nominal
    
    GC -  Micron rating 
          B  – 5 micron 
          C  – 10 micron 
          F  – 25 micron 
          L  – 50 micron 
          Q  – 75 micron 
          Y  – 1 micron
          X  - Surface 
          G  – Grooved
          U  – Ungrooved
     
    Y  -  Package option 
          2  – Bulk/polybag 
          3  – Polybag & labeled (Worldwide) 
          4  – Polybag & labeled (Latina) 
          5  – Bulk/No polybag
    
    Z -   Ring support option 
          0   – None 
          1   – Polysulfone
          2   – Stainless Steel
    
    EMC - End treatment 
          B  – 226 O-ring & spear
          C  – 222 O-ring & spear 
          F  – 222 O-ring & flat cap 
          N  – None 
          P  – P-core extender 
          Q  – Cap without Spring
          R  – Cap with Spring
     
    OC -  O-ring material 
          A  – Silicone 
          B  – Fluorocarbon 
          C  – EPR 
          D  – Nitrile 
          G  – Polyethylene 
          N  – None


Facility : Guangzhou, China

 
           

COMPONENTS: Filter Cartridges[1]
3M Micro-Klean™ RT(LC)(GC)16XYZ(EMC)(OC)[2]  

   
[1] Conforms to material requirements only.
[2] LC -  Length 
          09 – 9" - 3/4" nominal 
          10 – 10" nominal 
          19 – 19" - 1/2" nominal
          20 – 20" nominal 
          29 – 29" - 1/4" nominal
          30 – 30" nominal 39 – 39" nominal 
          40 - 40" nominal
          49 – 49" nominal 
          50 – 50" nominal 
          59 – 59" nominal 
          60 – 60" nominal 
          62 – 62" nominal
    
    GC -  Micron rating 
          B  – 5 micron 
          C  – 10 micron 
          F  – 25 micron 
          L  – 50 micron 
          Q  – 75 micron 
          Y  – 1 micron
          X  - Surface 
          G  – Grooved
          U  – Ungrooved
     
    Y  -  Package option 
          2  – Bulk/polybag 
          3  – Polybag & labeled (Worldwide) 
          4  – Polybag & labeled (Latina) 
          5  – Bulk/No polybag
    
    Z -   Ring support option 
          0   – None 
          1   – Polysulfone
          2   – Stainless Steel
    
    EMC - End treatment 
          B  – 226 O-ring & spear
          C  – 222 O-ring & spear 
          F  – 222 O-ring & flat cap 
          N  – None 
          P  – P-core extender 
          Q  – Cap without Spring
          R  – Cap with Spring
     
    OC -  O-ring material 
          A  – Silicone 
          B  – Fluorocarbon 
          C  – EPR 
          D  – Nitrile 
          G  – Polyethylene 
          N  – None


Facility : Nuevo Léon, Mexico

 
           

COMPONENTS: Filter Cartridges[1]
3M Micro-Klean™ RT(LC)(GC)16XYZ(EMC)(OC)[2]  

   
[1] Conforms to material requirements only.
[2] LC -  Length 
          09 – 9" - 3/4" nominal 
          10 – 10" nominal 
          19 – 19" - 1/2" nominal
          20 – 20" nominal 
          29 – 29" - 1/4" nominal
          30 – 30" nominal 39 – 39" nominal 
          40 - 40" nominal
          49 – 49" nominal 
          50 – 50" nominal 
          59 – 59" nominal 
          60 – 60" nominal 
          62 – 62" nominal
    
    GC -  Micron rating 
          B  – 5 micron 
          C  – 10 micron 
          F  – 25 micron 
          L  – 50 micron 
          Q  – 75 micron 
          Y  – 1 micron
          X  - Surface 
          G  – Grooved
          U  – Ungrooved
     
    Y  -  Package option 
          2  – Bulk/polybag 
          3  – Polybag & labeled (Worldwide) 
          4  – Polybag & labeled (Latina) 
          5  – Bulk/No polybag
    
    Z -   Ring support option 
          0   – None 
          1   – Polysulfone
          2   – Stainless Steel
    
    EMC - End treatment 
          B  – 226 O-ring & spear
          C  – 222 O-ring & spear 
          F  – 222 O-ring & flat cap 
          N  – None 
          P  – P-core extender 
          Q  – Cap without Spring
          R  – Cap with Spring
     
    OC -  O-ring material 
          A  – Silicone 
          B  – Fluorocarbon 
          C  – EPR 
          D  – Nitrile 
          G  – Polyethylene 
          N  – None


Facility : Kwidzynska, Poland

 
           

COMPONENTS: Filter Cartridges[1]
3M Micro-Klean™ RT(LC)(GC)16XYZ(EMC)(OC)[2]  

   
[1] Conforms to material requirements only.
[2] LC -  Length 
          09 – 9" - 3/4" nominal 
          10 – 10" nominal 
          19 – 19" - 1/2" nominal
          20 – 20" nominal 
          29 – 29" - 1/4" nominal
          30 – 30" nominal 39 – 39" nominal 
          40 - 40" nominal
          49 – 49" nominal 
          50 – 50" nominal 
          59 – 59" nominal 
          60 – 60" nominal 
          62 – 62" nominal
    
    GC -  Micron rating 
          B  – 5 micron 
          C  – 10 micron 
          F  – 25 micron 
          L  – 50 micron 
          Q  – 75 micron 
          Y  – 1 micron
          X  - Surface 
          G  – Grooved
          U  – Ungrooved
     
    Y  -  Package option 
          2  – Bulk/polybag 
          3  – Polybag & labeled (Worldwide) 
          4  – Polybag & labeled (Latina) 
          5  – Bulk/No polybag
    
    Z -   Ring support option 
          0   – None 
          1   – Polysulfone
          2   – Stainless Steel
    
    EMC - End treatment 
          B  – 226 O-ring & spear
          C  – 222 O-ring & spear 
          F  – 222 O-ring & flat cap 
          N  – None 
          P  – P-core extender 
          Q  – Cap without Spring
          R  – Cap with Spring
     
    OC -  O-ring material 
          A  – Silicone 
          B  – Fluorocarbon 
          C  – EPR 
          D  – Nitrile 
          G  – Polyethylene 
          N  – None

Number of matching Manufacturers is 1
Number of matching Products is 7
Processing time was 0 seconds