NSF Product and Service Listings

[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.
[POE] Product conforms to NSF/ANSI/CAN 61 health effects requirements.

[1] Conforms to material requirements only.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

[1] Conforms to material requirements only.
[POE] Product conforms to NSF/ANSI/CAN 61 health effects requirements.

[2] Conforms to the material and structural integrity requirements only.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

[POE] Product conforms to NSF/ANSI/CAN 61 health effects requirements.

[1] Product evaluated and determined to comply with efficiency rating requirements defined by
[ER] Softener Efficiency indicates that the softener achieves a minimum of 3,350 grains of
     hardness removed per pound of regenerant salt (477 grams of hardness removed per
     kilogram of regenerant salt), and also that it uses 5 gallons or less of regenerant
     water per 1,000 grains of hardness removed (18.9 liters or less of regenerant water per
     64.8 grams of hardness removed).
[HR] Hardness Reduction indicates that the published capacity ratings for reducing hardness
     have been verified.
[POE] Product conforms to NSF/ANSI/CAN 61 health effects requirements.

[1] Certified to Standard 58, material requirements only. At temperatures below 45°C,  pH
    value 3 ~ 8, flushing at least 48 hours.
[2] TF-XXYY-ZZ
    XX - Membrane element diameter in inches
         18 - 1.8"
         20 - 2.0"
         28 - 2.8"
         30 - 3.0"
    YY - Membrane element length in inches (12")
    ZZ - Permeated flow in gallons per day (GPD) (50, 75, 100, 150, 200, 300 or 400)
    

* This product is intended for use only on water supplies that have been shown to be at or
  below the referenced concentration and valency of arsenic.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

[1] Product evaluated and determined to comply with efficiency rating requirements defined
    by California state laws.
[ER] Softener Efficiency indicates that the softener achieves a minimum of 3,350 grains of
     hardness removed per pound of regenerant salt (477 grams of hardness removed per
     kilogram of regenerant salt), and also that it uses 5 gallons or less of regenerant
     water per 1,000 grains of hardness removed (18.9 liters or less of regenerant water per
     64.8 grams of hardness removed).
[HR] Hardness Reduction indicates that the published capacity ratings for reducing hardness
     have been verified.
[POE] Product conforms to NSF/ANSI 61 health effects requirements.