NSF Product and Service Listings
These NSF Official Listings are current as of Sunday, September 27, 2026 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/DWTU/Listings.asp?CompanyName=canature&
Note: Certain claims, such as Arsenic (Pentavalent) Reduction, appear as active links, allowing you to access additional information regarding the specific contaminants.
NSF/ANSI 42
Drinking Water Treatment Units - Aesthetic Effects
Drinking Water Treatment Units - Aesthetic Effects
| Canature Health Technology Group Co., Ltd. | |
| No. 508 & 518, Chuanda Road | |
| Pudong New Area | |
| Shanghai, 201200 | |
| China | |
| 86 21 5859 9999 | |
| Visit this company's website |
Facility : Zhejiang, China
| Replacement | Service Cycle | Flow Rate | ||||
| Brand Name / Trade Name / Model | Element | (gallons) | (gpm) | Claim | ||
|
Component: Carbon Block |
||||||
| CHCB-25XX-YY AABB[1] [Pb] | ||||||
|
  [1] BB = OD, 36mm
AA = ID, 60mm
XX = Length, 10in or 20in
YY = Micron Rating, 5µm
This product is Certified for a maximum use level of 8.52 in3/L or 139.6 g/L
[Pb] Product also evaluated and determined to possess weighted average lead content of
<=0.25% and complies with lead content requirements for “lead free” plumbing as defined
by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
Water Act.
|
||||||
| Canature WaterGroup | |
| 855 Park Street | |
| Unit 1 | |
| Regina, SK S4N 6M1 | |
| Canada | |
| 877-288-9888 |
Facility : # 1 Taiwan
|
COMPONENTS: Filter Housings[1] |
||||||
| P-H-PR-10-3/4 | ||||||
| P-H-PR-10-BV-3/4 | ||||||
| P-H-PR-10BV-1 | ||||||
| P-H-PR-20-3/4 | ||||||
| P-H-PR-20-BV-3/4 | ||||||
| P-H-PR-20BV-1 | ||||||
|
  [1] Conforms to materials and structural integrity requirements only. |
||||||
| Canature WaterGroup | |
| 855 Park Street | |
| Unit 1 | |
| Regina, SK S4N 6M1 | |
| Canada | |
| 877-288-9888 | |
| 306-501-5266 |
Facility : Colombo, Sri Lanka
|
COMPONENTS: Media, Carbon, Point-of-Use[1] |
||||||
| AQFCAT1240 | ||||||
|
  [1] Conforms to material requirements only. |
||||||
| Canature WaterGroup | |
| 855 Park Street | |
| Unit 1 | |
| Regina, SK S4N 6M1 | |
| Canada | |
| 877-288-9888 | |
| 877-288-9888 | |
| Visit this company's website |
Facility : Guangdong, China
|
COMPONENTS: Filter Cartridges |
||||||
| P-SW-1-10 | ||||||
| P-SW-1-10BV | ||||||
| P-SW-1-20 | ||||||
| P-SW-1-20BV | ||||||
| P-SW-20-10 | ||||||
| P-SW-20-10BV | ||||||
| P-SW-20-20 | ||||||
| P-SW-20-20BV | ||||||
| P-SW-5-10 | ||||||
| P-SW-5-10BV | ||||||
| P-SW-5-20 | ||||||
| P-SW-5-20BV | ||||||
| P-SW-50-10 | ||||||
| P-SW-50-10BV | ||||||
| P-SW-50-20 | ||||||
| P-SW-50-20BV | ||||||
| Canature WaterGroup | |
| 855 Park Street Unit 1 | |
| Regina, SK S4N 6M1 | |
| Canada | |
| 877-288-9888 |
Facility : Chonburi, Thailand
|
COMPONENTS: Media, Carbon, Point-of-Use[1] |
||||||
| AQFCAT1240 | ||||||
|
  [1] Conforms to material requirements only. |
||||||
| Canature WaterGroup | |
| 855 Park Street, Unit 1 | |
| Regina, SK S4N 6M1 | |
| Canada | |
| 877-288-9888 | |
| Visit this company's website |
Facility : Sri Lanka
|
COMPONENTS: Media, Carbon, Point-of-Use[1] |
||||||
| AQFCAT1240[2] | ||||||
|
  [1] The carbon source is coconut shell.
[2] Certified for the following mesh sizes: 3 x 6 - 100 x 635, -200, -325, fines, PAC-C,
PAC-S, and PAC-F.
|
||||||
NSF/ANSI 44
Cation Exchange Water Softeners
Cation Exchange Water Softeners
| Canature Health Technology Group Co., Ltd. | |
| No. 508 & 518, Chuanda Road | |
| Pudong New Area | |
| Shanghai, 201200 | |
| China | |
| 86 21 5859 9999 | |
| Visit this company's website |
Facility : Jiangsu, China
|
COMPONENTS: Tanks, Water Softener[1] |
||||||
| Pressure Vessel 4" 3072 | ||||||
| Pressure Vessel 4"-4" 3072 | ||||||
| Pressure Vessel 4"-4" 3672 | ||||||
| Pressure Vessel 6"-6" 3072 | ||||||
| Pressure Vessel 6"-6" 3672 | ||||||
| Pressure Vessel 6"-6" 4272 | ||||||
| Pressure Vessel 6"-6" 4872 | ||||||
| Pressure Vessel 6"-6" 5872 | ||||||
| Pressure Vessel 6"-6" 6367 | ||||||
| Pressure Vessel 6"-6" 6386 | ||||||
|
  [1] Conforms to material and structural integrity requirements. |
||||||
Facility : Shanghai, China
| Flow Rate | ||||||
| Brand Name / Trade Name / Model | (gpm) | Claim | ||||
|
Point-of-Entry[1] [G] [POE] |
||||||
| CN-1015-1160 | 4.4 | Hardness Reduction[HR] Efficiency Rated[ER] |
||||
| CS16H-1017 | 4.4 | Hardness Reduction[HR] Efficiency Rated[ER] |
||||
| CN-12SEF | 4.4 | Hardness Reduction[HR] Efficiency Rated[ER] |
||||
| CN-1017-1274 | 4.5 | Hardness Reduction[HR] Efficiency Rated[ER] |
||||
| CN-0822-1303 | 4.6 | Hardness Reduction[HR] Efficiency Rated[ER] |
||||
| CN-13SEF | 5.18 | Hardness Reduction[HR] Efficiency Rated[ER] |
||||
| CN-1024-1670 | 5.9 | Hardness Reduction[HR] Efficiency Rated[ER] |
||||
| CS8L-0722 | 4 | Hardness Reduction[HR] Efficiency Rated[ER] |
||||
| CS4L-0817 | 4 | Hardness Reduction[HR] Efficiency Rated[ER] |
||||
| CS4H-0817 | 4 | Hardness Reduction[HR] Efficiency Rated[ER] |
||||
| CS8H PLUS-0824 | 5.18 | Hardness Reduction[HR] Efficiency Rated[ER] |
||||
| CN-07SEF | 4 | Hardness Reduction[HR] Efficiency Rated[ER] |
||||
| CN-09SEF | 4 | Hardness Reduction[HR] Efficiency Rated[ER] |
||||
| CS18H-1017 | 4.4 | Hardness Reduction[HR] Efficiency Rated[ER] |
||||
| CS8F-0815 | 4 | Efficiency Rated[ER] Hardness Reduction[HR] |
||||
| CS8F-0824 | 5.18 | Efficiency Rated[ER] Hardness Reduction[HR] |
||||
| CS19H-1015 | 4.4 | Efficiency Rated[ER] Hardness Reduction[HR] |
||||
| CS21H-0926 | 4 | Efficiency Rated[ER] Hardness Reduction[HR] |
||||
| CS22H-1017 | 4.4 | Efficiency Rated[ER] Hardness Reduction[HR] |
||||
| CSF25H-0817 | 4 | Efficiency Rated[ER] Hardness Reduction[HR] |
||||
| CN-0717-679 | 4 | Hardness Reduction[HR] Efficiency Rated[ER] |
||||
| CN-0815-991 | 4 | Hardness Reduction[HR] Efficiency Rated[ER] |
||||
| CN-0817-792 | 4 | Hardness Reduction[HR] Efficiency Rated[ER] |
||||
| CN-08SEF | 4 | Hardness Reduction[HR] Efficiency Rated[ER] |
||||
| CN-0917-936 | 4 | Hardness Reduction[HR] Efficiency Rated[ER] |
||||
| CS8H-0722 | 4 | Hardness Reduction[HR] Efficiency Rated[ER] |
||||
| CS9H-0815 | 4 | Hardness Reduction[HR] Efficiency Rated[ER] |
||||
| CS13H-1017 | 4.4 | Hardness Reduction[HR] Efficiency Rated[ER] |
||||
| CS18H-1015 | 4.4 | Efficiency Rated[ER] Hardness Reduction[HR] |
||||
| CN-1017-1387 | 4.9 | Hardness Reduction[HR] Efficiency Rated[ER] |
||||
| CS8H PLUS-0815 | 4 | Hardness Reduction[HR] Efficiency Rated[ER] |
||||
| CS17H-1015 | 4.4 | Hardness Reduction[HR] Efficiency Rated[ER] |
||||
| CS12H-0926 | 4 | Hardness Reduction[HR] Efficiency Rated[ER] |
||||
| CS15H-1015 | 4.4 | Hardness Reduction[HR] Efficiency Rated[ER] |
||||
| CS3L-1017 | 4.4 | Hardness Reduction[HR] Efficiency Rated[ER] |
||||
| CS3H-1017 | 4.4 | Hardness Reduction[HR] Efficiency Rated[ER] |
||||
| CN-0822-1302 | 5.18 | Hardness Reduction[HR] Efficiency Rated[ER] |
||||
| CS5H-1017 | 4.4 | Hardness Reduction[HR] Efficiency Rated[ER] |
||||
| CS6L-1017 | 4.4 | Hardness Reduction[HR] Efficiency Rated[ER] |
||||
| CS6H-1017 | 4.4 | Hardness Reduction[HR] Efficiency Rated[ER] |
||||
| CS7H-1017 | 4.4 | Hardness Reduction[HR] Efficiency Rated[ER] |
||||
| CS10H-1017 | 4.4 | Hardness Reduction[HR] Efficiency Rated[ER] |
||||
| CN-1017-1245 | 4.4 | Hardness Reduction[HR] Efficiency Rated[ER] |
||||
|
  [1] Conforms to material and structural integrity requirements.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
[ER] Softener Efficiency indicates that the softener achieves a minimum of 3,350 grains of
hardness removed per pound of regenerant salt (477 grams of hardness removed per
kilogram of regenerant salt), and also that it uses 5 gallons or less of regenerant
water per 1,000 grains of hardness removed (18.9 liters or less of regenerant water per
64.8 grams of hardness removed).
[HR] Hardness Reduction indicates that the published capacity ratings for reducing hardness
have been verified.
[POE] Product conforms to NSF/ANSI/CAN 61 health effects requirements.
|
||||||
|
COMPONENTS: Tanks, Water Softener[1] [2] [G] [10] |
||||||
| Pressure Vessel 09x15 F | ||||||
| Pressure Vessel 10x54 F | ||||||
| Pressure Vessel 10x47 F | ||||||
| Pressure Vessel 09x42 F | ||||||
| Pressure Vessel 09x14 F | ||||||
| Pressure Vessel 09x48 F | ||||||
| Pressure Vessel 10x35 F | ||||||
| Pressure Vessel 06x16 F | ||||||
| Pressure Vessel 09x34 F | ||||||
| Pressure Vessel 10x40 F | ||||||
| Pressure Vessel 10x33 F | ||||||
| Pressure Vessel 10x28 F | ||||||
| Pressure Vessel 08x35 F | ||||||
| Pressure Vessel 10x24 F | ||||||
| Pressure Vessel 10x17 F | ||||||
| Pressure Vessel 10x13 F | ||||||
| Pressure Vessel 09x35 F | ||||||
| Pressure Vessel 08x25 F | ||||||
| Pressure Vessel 08x19 F | ||||||
| Pressure Vessel 10x26 F | ||||||
| Pressure Vessel 09x26 F | ||||||
| Pressure Vessel 5x17 | ||||||
| Pressure Vessel 5x20 | ||||||
| Pressure Vessel 7x13 | ||||||
| Pressure Vessel 7x17 | ||||||
| Pressure Vessel 7x19 | ||||||
| Pressure Vessel 7x22 | ||||||
| Pressure Vessel 7x30 | ||||||
| Pressure Vessel 7x35 | ||||||
| Pressure Vessel 7x44 | ||||||
| Pressure Vessel 8x15 | ||||||
| Pressure Vessel 8x17 | ||||||
| Pressure Vessel 8x30 | ||||||
| Pressure Vessel 8x35 | ||||||
| Pressure Vessel 8x44 | ||||||
| Pressure Vessel 9x35 | ||||||
| Pressure Vessel 9x42 | ||||||
| Pressure Vessel 9x48 | ||||||
| Pressure Vessel 10x15 | ||||||
| Pressure Vessel 10x17 | ||||||
| Pressure Vessel 10x24 | ||||||
| Pressure Vessel 10x26 | ||||||
| Pressure Vessel 10x30 | ||||||
| Pressure Vessel 10x35 | ||||||
| Pressure Vessel 10x40 | ||||||
| Pressure Vessel 10x44 | ||||||
| Pressure Vessel 10x47 | ||||||
| Pressure Vessel 10x54 | ||||||
| Pressure Vessel 11x35 | ||||||
| Pressure Vessel 11x44 | ||||||
| Pressure Vessel 12x48 | ||||||
| Pressure Vessel 12x52 | ||||||
| Pressure Vessel 13x44 | ||||||
| Pressure Vessel 13x54 | ||||||
| Pressure Vessel 14x52 | ||||||
| Pressure Vessel 14x65 | ||||||
| Pressure Vessel 16x24 | ||||||
| Pressure Vessel 16x36 | ||||||
| Pressure Vessel 16x44 | ||||||
| Pressure Vessel 16x52 | ||||||
| Pressure Vessel 16x65 | ||||||
| Pressure Vessel 18x36 | ||||||
| Pressure Vessel 18x53 | ||||||
| Pressure Vessel 18x65 | ||||||
| Pressure Vessel 21x36 | ||||||
| Pressure Vessel 21x53 | ||||||
| Pressure Vessel 21x62 | ||||||
| Pressure Vessel 24x72 | ||||||
| Pressure Vessel 2.5" 05x17 | ||||||
| Pressure Vessel 2.5" 05x20 | ||||||
| Pressure vessel 2.5" 06×13 | ||||||
| Pressure Vessel 2.5" 06x17 | ||||||
| Pressure Vessel 2.5" 06x18 | ||||||
| Pressure Vessel 2.5" 06x22 | ||||||
| Pressure vessel 2.5" 06x29 | ||||||
| Pressure vessel 2.5" 06x30 | ||||||
| Pressure Vessel 2.5" 06x35 | ||||||
| Pressure Vessel 2.5" 07x13 | ||||||
| Pressure Vessel 2.5" 07x17 | ||||||
| Pressure Vessel 2.5" 07x19 | ||||||
| Pressure Vessel 2.5" 07x22 | ||||||
| pressure vessel 2.5" 07x24 | ||||||
| Pressure Vessel 2.5" 07x30 | ||||||
| Pressure Vessel 2.5" 07x35 | ||||||
| Pressure Vessel 2.5" 07x44 | ||||||
| Pressure Vessel 2.5" 08x13 | ||||||
| Pressure vessel 2.5" 08x13D | ||||||
| Pressure Vessel 2.5" 08x15 | ||||||
| Pressure Vessel 2.5" 08x17 | ||||||
| Pressure Vessel 2.5" 08x18 | ||||||
| Pressure Vessel 2.5" 08x22 | ||||||
| Pressure Vessel 2.5" 08x24 | ||||||
| Pressure Vessel 2.5" 08x26 | ||||||
| Pressure Vessel 2.5" 08x30 | ||||||
| Pressure Vessel 2.5" 08x35 | ||||||
| Pressure vessel 2.5" 08x37 | ||||||
| Pressure vessel 2.5" 08x40 | ||||||
| Pressure Vessel 2.5" 08x44 | ||||||
| Pressure vessel 2.5" 08x44DH | ||||||
| Pressure Vessel 2.5" 09x13 | ||||||
| Pressure Vessel 2.5" 09x15 | ||||||
| Pressure vessel 2.5" 09x16DH | ||||||
| Pressure Vessel 2.5" 09x17 | ||||||
| Pressure Vessel 2.5" 09x18 | ||||||
| Pressure Vessel 2.5" 09x24 | ||||||
| Pressure Vessel 2.5" 09x26 | ||||||
| Pressure Vessel 2.5" 09x30 | ||||||
| Pressure Vessel 2.5" 09x35 | ||||||
| Pressure vessel 2.5" 09x36DH | ||||||
| Pressure Vessel 2.5" 09x42 | ||||||
| Pressure vessel 2.5" 09x42DH | ||||||
| Pressure Vessel 2.5" 09x48 | ||||||
| Pressure vessel 2.5" 09x48DH | ||||||
| Pressure Vessel 2.5" 10x13 | ||||||
| Pressure Vessel 2.5" 10x15 | ||||||
| Pressure Vessel 2.5" 10x17 | ||||||
| Pressure vessel 2.5" 10x18 | ||||||
| Pressure vessel 2.5" 10x19 | ||||||
| Pressure Vessel 2.5" 10x24 | ||||||
| Pressure Vessel 2.5" 10x26 | ||||||
| Pressure Vessel 2.5" 10x30 | ||||||
| Pressure Vessel 2.5" 10x35 | ||||||
| Pressure Vessel 2.5" 10x40 | ||||||
| Pressure vessel 2.5" 10x40DH | ||||||
| Pressure Vessel 2.5" 10x44 | ||||||
| Pressure vessel 2.5" 10×44DH | ||||||
| Pressure Vessel 2.5" 10x47 | ||||||
| Pressure vessel 2.5" 10×47DH | ||||||
| Pressure Vessel 2.5" 10x54 | ||||||
| Pressure vessel 2.5" 10×54DH | ||||||
| Pressure Vessel 2.5" 11x35 | ||||||
| Pressure Vessel 2.5" 11x44 | ||||||
| Pressure Vessel 2.5" 12x17 | ||||||
| Pressure Vessel 2.5" 12x48 | ||||||
| Pressure vessel 2.5" 12×48DH | ||||||
| Pressure Vessel 2.5" 12x52 | ||||||
| Pressure vessel 2.5" 10×52DH | ||||||
| Pressure vessel 2.5" 13x24 | ||||||
| Pressure Vessel 2.5" 13x44 | ||||||
| Pressure Vessel 2.5" 13x54 | ||||||
| Pressure Vessel 2.5" 14x52 | ||||||
| Pressure Vessel 2.5" 14x65 | ||||||
| Pressure Vessel 2.5" 16x24 | ||||||
| Pressure Vessel 2.5" 16x36 | ||||||
| Pressure Vessel 2.5" 16x44 | ||||||
| Pressure Vessel 2.5" 16x52 | ||||||
| Pressure Vessel 2.5" 16x65 | ||||||
| Pressure Vessel 2.5 in 08x13D | ||||||
| Pressure Vessel 2.5 in 10x17D | ||||||
| Pressure Vessel 2.5 in 10x35D | ||||||
| Pressure Vessel 4" 12x17 | ||||||
| Pressure Vessel 4" 12x48 | ||||||
| Pressure vessel 4" 12×48DH | ||||||
| Pressure Vessel 4" 12x52 | ||||||
| Pressure vessel 4" 12×52DH | ||||||
| Pressure vessel 4" 13x24 | ||||||
| Pressure Vessel 4" 13x44 | ||||||
| Pressure Vessel 4" 13x54 | ||||||
| Pressure Vessel 4" 14x52 | ||||||
| Pressure Vessel 4" 14x65 | ||||||
| Pressure Vessel 4" 16x24 | ||||||
| Pressure Vessel 4" 16x36 | ||||||
| Pressure Vessel 4" 16x44 | ||||||
| Pressure Vessel 4" 16x52 | ||||||
| Pressure vessel 4" 16x52D | ||||||
| Pressure Vessel 4" 16x65 | ||||||
| Pressure Vessel 4" 18x36 | ||||||
| Pressure Vessel 4" 18x53 | ||||||
| Pressure Vessel 4" 18x65 | ||||||
| Pressure Vessel 4" 21x36 | ||||||
| Pressure Vessel 4" 21x53 | ||||||
| Pressure Vessel 4" 21x62 | ||||||
| Pressure Vessel 4" 24x38 | ||||||
| Pressure Vessel 4" 24x72 | ||||||
| Pressure Vessel 4" 3072 | ||||||
| Pressure Vessel 4"-4" 3072 | ||||||
| Pressure Vessel 6"-6" 3072 | ||||||
| Pressure Vessel 4"-4" 3672 | ||||||
| Pressure Vessel 6"-6" 3672 | ||||||
| Pressure Vessel 6"-6" 4272 | ||||||
| Pressure Vessel 6"-6" 4872 | ||||||
| Pressure Vessel 6"-6" 5872 | ||||||
| Pressure Vessel 6"-6" 6367 | ||||||
| Pressure Vessel 6"-6" 6386 | ||||||
| Pressure Vessel 4 in 16x65D | ||||||
| Pressure Vessel 4 in 18x65D | ||||||
| Pressure Vessel 4 in 21x62D | ||||||
| Pressure Vessel 4 in 24x38D | ||||||
| Pressure Vessel 4 in 24x72D | ||||||
|
  [1] Conforms to material and structural integrity requirements.
[2] All models listed may be available in a variety of colors, including but not limited to:
natural, black, green, gray, blue, etc.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
[10] The "x" in the trade name may be omitted.
|
||||||
|
COMPONENTS: Valves, Control, Point-of-Entry [1] [8] [9] [G] |
||||||
| BNT1050(F)UF | ||||||
| BNT1050(T)UF | ||||||
| BNT1051F | ||||||
| BNT1051T | ||||||
| BNT1050(F)DF | ||||||
| BNT1050(T)DF | ||||||
|
  [1] Conforms to material and structural integrity requirements.
[8] The 105 indicates the model of the valves and may be followed by either a 0 or a 1 and
either an F or a T.
The 0 models are for use with water softeners.
The 1 models are for use with water filters.
F indicates control valve with meter.
T indicates control valve with timer.
UF indicates up flow regeneration.
DF indicates down flow regeneration.
[9] This product is certified for a maximum use level of 0.09 units per L.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||||
|
COMPONENTS: Valves, Diverter, Point-of-Entry[1] [G] |
||||||
| BNT6651F[3] | ||||||
| BNT1851F[3] | ||||||
| BNT2850HE TP[11] | ||||||
| BNT850SE TP[11] | ||||||
| BNT2851HE T[3] | ||||||
| NVO465[3] | ||||||
| NVO165[4] [5] | ||||||
| BNT3650F[3] | ||||||
| BNT7850HE F[3] | ||||||
| BNT850SE U F[3] | ||||||
| BNT5850HE T[3] | ||||||
| BNT870T[6] [7] | ||||||
| BNT89D1F[6] [7] | ||||||
| BNT4890T[6] [7] | ||||||
| BNT7891T[6] [7] | ||||||
| IWT65[4] [5] | ||||||
| NVO465[4] [5] | ||||||
| BNT3651F[3] | ||||||
| BNT3651T[3] | ||||||
| BNT5651F[3] | ||||||
| BNT5651T[3] | ||||||
| BNT4891T[6] [7] | ||||||
| BNT5890F[6] [7] | ||||||
| BNT6650F[3] | ||||||
| BNT6650T[3] | ||||||
| BNT2891F[6] [7] | ||||||
| BNT3890F[6] [7] | ||||||
| BNT481F | ||||||
| BNT81TP | ||||||
| BNT951F[4] [5] | ||||||
| BNT950 MTS slave valve[4] [5] | ||||||
| BNT81F | ||||||
| BNT481T | ||||||
| BNT4650F[3] | ||||||
| BNT4650T[3] | ||||||
| BNT6651T[3] | ||||||
| BNT8650F[3] | ||||||
| BNT5890T[6] [7] | ||||||
| BNT5891F[6] [7] | ||||||
| BNT8650T[3] | ||||||
| BNT8651F[3] | ||||||
| BNT3890T[6] [7] | ||||||
| BNT3891F[6] [7] | ||||||
| BNT89D1T[6] [7] | ||||||
| BNT189D0F[6] [7] | ||||||
| BNT951MTS slave valve[4] [5] | ||||||
| IWT165[4] [5] | ||||||
| BNT189D1F[6] [7] | ||||||
| BNT489D0F[6] [7] | ||||||
| BNT4651F[3] | ||||||
| BNT4651T[3] | ||||||
| BNT189D0T[6] [7] | ||||||
| BNT189D1T[6] [7] | ||||||
| BNT5891T[6] [7] | ||||||
| BNT870F[6] [7] | ||||||
| BNT7891F[6] [7] | ||||||
| BNT T890F[6] [7] | ||||||
| BNT3891T[6] [7] | ||||||
| BNT4890F[6] [7] | ||||||
| BNT T891T[6] [7] | ||||||
| BNT89D0F[6] [7] | ||||||
| IWT265[4] [5] | ||||||
| IWT565[4] [5] | ||||||
| BNT T890T[6] [7] | ||||||
| BNT T891F[6] [7] | ||||||
| BNT5650F[3] | ||||||
| BNT5650T[3] | ||||||
| NVO865[4] [5] | ||||||
| BNT81T | ||||||
| BNT489D0T[6] [7] | ||||||
| BNT871T[6] [7] | ||||||
| BNT7890T[6] [7] | ||||||
| BNT489D1F[6] [7] | ||||||
| BNT1851HE F[3] | ||||||
| BNT1851HE T[3] | ||||||
| BNT761F[13] | ||||||
| BNT890F[6] [7] | ||||||
| BNT89D0T[6] [7] | ||||||
| CAN265[3] | ||||||
| IWT365[3] | ||||||
| IWT565[3] | ||||||
| BNT1870F[6] [7] | ||||||
| BNT2891T[6] [7] | ||||||
| BNT81FP | ||||||
| BNT481TP | ||||||
| BNT1650T[3] | ||||||
| BNT1651F[3] | ||||||
| BNT8651T[3] | ||||||
| BNT850F[3] | ||||||
| 85HE-TA[3] | ||||||
| BNT1750S T[3] | ||||||
| BNT871F[6] [7] | ||||||
| BNT89D0F[6] [7] | ||||||
| BNT489D1T[6] [7] | ||||||
| BNT870T[6] [7] | ||||||
| CAN365[3] | ||||||
| CAN465[3] | ||||||
| IWT65[3] | ||||||
| NVO165[3] | ||||||
| BNT481FP | ||||||
| BNT650F[3] | ||||||
| BNT1651T[3] | ||||||
| BNT2650F[3] | ||||||
| BNT850T[3] | ||||||
| BNT851F[3] | ||||||
| BNT1751S F[3] | ||||||
| BNT1751S T[3] | ||||||
| BNT89D0T[6] [7] | ||||||
| BNT89D1F[6] [7] | ||||||
| BNT870F[6] [7] | ||||||
| BNT871T[6] [7] | ||||||
| CAN565[3] | ||||||
| CAN65[3] | ||||||
| NVO865[3] | ||||||
| BNT950T[4] [5] | ||||||
| BNT650T[3] | ||||||
| BNT651F[3] | ||||||
| BNT2650T[3] | ||||||
| BNT2651F[3] | ||||||
| BNT851T[3] | ||||||
| BNT1850F[3] | ||||||
| BNT1850HE F[3] | ||||||
| BNT1850HE T[3] | ||||||
| BNT890T[6] [7] | ||||||
| BNT1890F[6] [7] | ||||||
| BNT89D1T[6] [7] | ||||||
| BNT7890F[6] [7] | ||||||
| BNT871F[6] [7] | ||||||
| BNT1870T[6] [7] | ||||||
| BNT761T[13] | ||||||
| BNT189D1 F[6] [7] | ||||||
| BNT189D1 T[6] [7] | ||||||
| IWT165[3] | ||||||
| IWT265[3] | ||||||
| BNT950F[4] [5] | ||||||
| BNT951T[4] [5] | ||||||
| BNT2870F[6] [7] | ||||||
| BNT2871T[6] [7] | ||||||
| BNT651T[3] | ||||||
| BNT1650F[3] | ||||||
| BNT2651T[3] | ||||||
| BNT3650T[3] | ||||||
| BNT1850T[3] | ||||||
| BNT1851T[3] | ||||||
| BNT1890T[6] [7] | ||||||
| BNT2890F[6] [7] | ||||||
| BNT1871 F[6] [7] | ||||||
| BNT1871 T[6] [7] | ||||||
| BNT2871F[6] [7] | ||||||
| BNT4891F[6] [7] | ||||||
| BNT1870 F[6] [7] | ||||||
| BNT1870 T[6] [7] | ||||||
| BNT891F[6] [7] | ||||||
| BNT891T[6] [7] | ||||||
| BNT1871T[6] [7] | ||||||
| BNT2870T[6] [7] | ||||||
| BNT2890T[6] [7] | ||||||
| BNT1871F[6] [7] | ||||||
| BNT189D0 F[6] [7] | ||||||
| BNT189D0 T[6] [7] | ||||||
| BNT1891F[6] [7] | ||||||
| BNT1891T[6] [7] | ||||||
| BNT851HE FP[11] | ||||||
| BNT2851F[3] | ||||||
| BNT1851HE FP[11] | ||||||
| BNT751S T[3] | ||||||
| BNT2851HE FP[11] | ||||||
| BNT2851HE TP[11] | ||||||
| BNT4850HE FP[11] | ||||||
| BNT4850HE TP[11] | ||||||
| BNT4851HE FP[11] | ||||||
| BNT4851HE TP[11] | ||||||
| BNT5850HE FP[11] | ||||||
| BNT5850HE TP[11] | ||||||
| BNT2851T[3] | ||||||
| BNT2851HE F[3] | ||||||
| BNT4850HE F[3] | ||||||
| BNT4850HE T[3] | ||||||
| BNT4850F[3] | ||||||
| BNT4850T[3] | ||||||
| BNT850HE FP[11] | ||||||
| BNT851HE TP[11] | ||||||
| BNT7650F[3] | ||||||
| BNT7650T[3] | ||||||
| BNT1850HE FP[11] | ||||||
| BNT1850HE TP[11] | ||||||
| BNT7850HE T[3] | ||||||
| BNT7851HE F[3] | ||||||
| BNT7651F[3] | ||||||
| BNT7651T[3] | ||||||
| BNT1851HE TP[11] | ||||||
| BNT2850HE FP[11] | ||||||
| BNT7851HE T[3] | ||||||
| BNT790F[3] | ||||||
| BNT5851HE FP[11] | ||||||
| BNT5851HE TP[11] | ||||||
| BNT8651SE F[3] | ||||||
| BNT8651SE T[3] | ||||||
| BNT4851HE F[3] | ||||||
| BNT4851HE T[3] | ||||||
| BNT5851SE TP[11] | ||||||
| BNT880F[12] | ||||||
| BNT790T[3] | ||||||
| BNT791F[3] | ||||||
| BNT5850T[3] | ||||||
| BNT5851F[3] | ||||||
| BNT2850F[3] | ||||||
| BNT2850T[3] | ||||||
| BNT851HE T[3] | ||||||
| BNT851SE F[3] | ||||||
| BNT750S[3] | ||||||
| BNT750S F[3] | ||||||
| BNT850SE FP[11] | ||||||
| BNT851SE FP[11] | ||||||
| CAN165[3] | ||||||
| BNT5850 T[3] | ||||||
| BNT5850F[3] | ||||||
| BNT880T[12] | ||||||
| BNT760T[13] | ||||||
| BNT791T[3] | ||||||
| BNT850HE F[3] | ||||||
| BNT5851HE F[3] | ||||||
| BNT5851HE T[3] | ||||||
| BNT2850HE F[3] | ||||||
| BNT2850HE T[3] | ||||||
| BNT851SE T[3] | ||||||
| BNT851SE U F[3] | ||||||
| BNT750S T[3] | ||||||
| BNT751S F[3] | ||||||
| BNT851SE TP[11] | ||||||
| BNT5850SE FP[11] | ||||||
| BNT5850HE F[3] | ||||||
| BNT5850SE F[3] | ||||||
| BNT760F[13] | ||||||
| BNT2750S T[3] | ||||||
| BNT850HE T[3] | ||||||
| BNT850SE F[3] | ||||||
| BNT5851SE F[3] | ||||||
| BNT5851SE T[3] | ||||||
| BNT2750S F[3] | ||||||
| BNT850HE TP[11] | ||||||
| BNT8650SE F[3] | ||||||
| BNT8650SE T[3] | ||||||
| BNT5850SE TP[11] | ||||||
| BNT5851SE FP[11] | ||||||
| BNT5850SE T[3] | ||||||
| BNT5850SE UF[3] | ||||||
| BNT2751S F[3] | ||||||
| BNT2751S T[3] | ||||||
| BNT850SE T[3] | ||||||
| BNT851HE F[3] | ||||||
| BNT5851SE UF[3] | ||||||
| BNT5851T[3] | ||||||
| BNT4851 F[3] | ||||||
| BNT4851 T[3] | ||||||
|
  [1] Conforms to material and structural integrity requirements.
[3] This product is Certified for a maximum use level of 0.48 units per L.
[4] This product is Certified for a maximum use level of 0.05 units per L.
[5] The 95 indicates the model of the valves and may be followed by either a 0 or a 1 and
either an F or a T.
The 0 models are for use with water softeners.
The 1 models are for use with in-line water filters.
F indicates control valve with meter.
T indicates control valve with timer.
A complete model number example is ''BNT 951F''.
BNT indicates control valve trade name for all world markets.
[6] This product is Certified for a maximum use level of 0.05 units per L.
[7] The 89 indicates the model of the valves and may be followed by either a 0 or a 1 and
either an F or a T.
The 0 models are for use with water softeners.
The 1 models are for use with in-line water filters.
F indicates control valve with meter.
T indicates control valve with timer.
A complete model number example is ''BNT 891F''.
BNT indicates control valve trade name for all world markets.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
[11] The T indicates that the control valve does not have a bypass, while the F indicates
that the control valve does have a bypass. The S indicates that the valve is controlled
by a microswitch. The 0 models are for use with water softeners. The 1 models are for
use with in-line water filters. Models sold in Canada and USA markets do not contain the
additional suffix. The SE models differ from the HE models only in the PCB display and
software.
[12] The difference in the T and F model: The T indicates that the control valve does not
have a bypass, while the F indicates that the control valve does have a bypass.
[13] The difference in the T and F model: The T indicates that the control valve does not
have a bypass, while the F indicates that the control valve does have a bypass. The 0
models are for use with water softeners. The 1 models are for use with in-line water
filters. Models sold in Canada and USA markets do not contain the additional suffix.
|
||||||
NOTE: These components do not bear the NSF Mark. Evidence of Certification will appear on the
manufacturer's literature and packaging.
Facility : Zhejiang, China
| Flow Rate | ||||||
| Brand Name / Trade Name / Model | (gpm) | Claim | ||||
|
Point-of-Entry[1] [Pb] [POE] |
||||||
| CN-0717-679 | 4 | Hardness Reduction[HR] Efficiency Rated[ER] |
||||
| CN-07SEF | 4 | Hardness Reduction[HR] Efficiency Rated[ER] |
||||
| CN-0815-991 | 4 | Hardness Reduction[HR] Efficiency Rated[ER] |
||||
| CN-0817-792 | 4 | Hardness Reduction[HR] Efficiency Rated[ER] |
||||
| CN-0822-1302 | 5.18 | Hardness Reduction[HR] Efficiency Rated[ER] |
||||
| CN-0822-1303 | 4.6 | Hardness Reduction[HR] Efficiency Rated[ER] |
||||
| CN-08SEF | 4 | Hardness Reduction[HR] Efficiency Rated[ER] |
||||
| CN-0917-936 | 4 | Hardness Reduction[HR] Efficiency Rated[ER] |
||||
| CN-09SEF | 4 | Hardness Reduction[HR] Efficiency Rated[ER] |
||||
| CN-1015-1160 | 4.4 | Hardness Reduction[HR] Efficiency Rated[ER] |
||||
| CN-1017-1245 | 4.4 | Hardness Reduction[HR] Efficiency Rated[ER] |
||||
| CN-1017-1387 | 4.9 | Hardness Reduction[HR] Efficiency Rated[ER] |
||||
| CN-1024-1670 | 5.9 | Hardness Reduction[HR] Efficiency Rated[ER] |
||||
| CN-12SEF | 4.4 | Hardness Reduction[HR] Efficiency Rated[ER] |
||||
| CN-13SEF | 5.18 | Hardness Reduction[HR] Efficiency Rated[ER] |
||||
| CS10H-1017 | 4.4 | Hardness Reduction[HR] Efficiency Rated[ER] |
||||
| CS12H-0926 | 4 | Hardness Reduction[HR] Efficiency Rated[ER] |
||||
| CS13H-1017 | 4.4 | Hardness Reduction[HR] Efficiency Rated[ER] |
||||
| CS15H-1015 | 4.4 | Hardness Reduction[HR] Efficiency Rated[ER] |
||||
| CS16H-1017 | 4.4 | Hardness Reduction[HR] Efficiency Rated[ER] |
||||
| CS17H-1015 | 4.4 | Hardness Reduction[HR] Efficiency Rated[ER] |
||||
| CS18H-1015 | 4.4 | Hardness Reduction[HR] Efficiency Rated[ER] |
||||
| CS18H-1017 | 4.4 | Hardness Reduction[HR] Efficiency Rated[ER] |
||||
| CS19H-1015 | 4.4 | Hardness Reduction[HR] Efficiency Rated[ER] |
||||
| CS21H-0926 | 4 | Hardness Reduction[HR] Efficiency Rated[ER] |
||||
| CS22H-1017 | 4.4 | Hardness Reduction[HR] Efficiency Rated[ER] |
||||
| CS3H-1017 | 4.4 | Hardness Reduction[HR] Efficiency Rated[ER] |
||||
| CS3L-1017 | 4.4 | Hardness Reduction[HR] Efficiency Rated[ER] |
||||
| CS4H-0817 | 4 | Hardness Reduction[HR] Efficiency Rated[ER] |
||||
| CS4L-0817 | 4 | Hardness Reduction[HR] Efficiency Rated[ER] |
||||
| CS5H-1017 | 4.4 | Hardness Reduction[HR] Efficiency Rated[ER] |
||||
| CS6H-1017 | 4.4 | Hardness Reduction[HR] Efficiency Rated[ER] |
||||
| CS6L-1017 | 4.4 | Hardness Reduction[HR] Efficiency Rated[ER] |
||||
| CS7H-1017 | 4.4 | Hardness Reduction[HR] Efficiency Rated[ER] |
||||
| CS8F-0815 | 4 | Hardness Reduction[HR] Efficiency Rated[ER] |
||||
| CS8F-0824 | 5.18 | Hardness Reduction[HR] Efficiency Rated[ER] |
||||
| CS8H PLUS-0815 | 4 | Hardness Reduction[HR] Efficiency Rated[ER] |
||||
| CS8H PLUS-0824 | 5.18 | Hardness Reduction[HR] Efficiency Rated[ER] |
||||
| CS8H-0722 | 4 | Hardness Reduction[HR] Efficiency Rated[ER] |
||||
| CS8L-0722 | 4 | Hardness Reduction[HR] Efficiency Rated[ER] |
||||
| CS9H-0815 | 4 | Hardness Reduction[HR] Efficiency Rated[ER] |
||||
| CSF25H-0817 | 4 | Hardness Reduction[HR] Efficiency Rated[ER] |
||||
|
  [1] Conforms to material and structural integrity requirements.
[ER] Softener Efficiency indicates that the softener achieves a minimum of 3,350 grains of
hardness removed per pound of regenerant salt (477 grams of hardness removed per
kilogram of regenerant salt), and also that it uses 5 gallons or less of regenerant
water per 1,000 grains of hardness removed (18.9 liters or less of regenerant water per
64.8 grams of hardness removed).
[HR] Hardness Reduction indicates that the published capacity ratings for reducing hardness
have been verified.
[Pb] Product also evaluated and determined to possess weighted average lead content of
<=0.25% and complies with lead content requirements for “lead free” plumbing as defined
by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
Water Act.
[POE] Product conforms to NSF/ANSI/CAN 61 health effects requirements.
|
||||||
| Canature Health Technology Group.Co.,Ltd. | |
| Chuanda Road 508&518, Pudong New Area | |
| Shanghai | |
| China | |
| 86 21 58599999 |
Facility : Anhui, China
|
COMPONENTS: Media, Cation Exchange Resin[1] |
||||||
| 001x10 | ||||||
| 001x7 | ||||||
| 001x8 | ||||||
| D113HFG | ||||||
| DURO-001×8NaFGFM | ||||||
|
  [1] Certified for the mesh sizes 16 - 50. |
||||||
NSF/ANSI 58
Reverse Osmosis Drinking Water Treatment Systems
Reverse Osmosis Drinking Water Treatment Systems
| Canature Health Technology Group Co., Ltd. | |
| No. 508 & 518, Chuanda Road | |
| Pudong New Area | |
| Shanghai, 201200 | |
| China | |
| 86 21 5859 9999 | |
| Visit this company's website |
Facility : Shanghai, China
| Replacement | Daily Production | |||||
| Brand Name / Trade Name / Model | Module | Rate (gpd) | Claim | |||
|
Plumbed-In to Separate Tap |
||||||
| BNT-RO122 | 1812-75-NPI 1812-75-NPD CN-1812-75 |
109.04 | TDS Reduction | |||
| BNT-RO125 | 1812-75-NPI 1812-75-NPD CN-1812-75 |
109.04 | TDS Reduction | |||
| BNT-RO131 | 1812-75-NPI 1812-75-NPD CN-1812-75 |
18.12 | TDS Reduction | |||
| BNT-RO133 | 1812-50-NPI 1812-50-NPD CN-1812-50 |
89.01 | TDS Reduction | |||
| BNT-RO221 | 1812-75-NPI 1812-75-NPD CN-1812-75 |
109.04 | TDS Reduction | |||
| BNT-RO301 | 1812-50-NPI 1812-50-NPD CN-1812-50 |
89.01 | TDS Reduction | |||
| BNT-RO309 | 1812-50-NPI 1812-50-NPD CN-1812-50 |
14.29 | TDS Reduction | |||
| CN-RO-50G | 1812-50-NPI 1812-50-NPD CN-1812-50 |
89.01 | TDS Reduction | |||
| CN-RO75 | 1812-75-NPI 1812-75-NPD CN-1812-75 |
109.04 | TDS Reduction | |||
| RO-B02-75G | 1812-75-NPI 1812-75-NPD CN-1812-75 |
109.04 | TDS Reduction | |||
| RO-B03-50G | 1812-50-NPI 1812-50-NPD CN-1812-50 |
14.29 | TDS Reduction | |||
| RO-B03-75G | 1812-75-NPI 1812-75-NPD CN-1812-75 |
18.12 | TDS Reduction | |||
| RO-B04-50G | 1812-50-NPI 1812-50-NPD CN-1812-50 |
89.01 | TDS Reduction | |||
| RO-B04-75G | 1812-75-NPI 1812-75-NPD CN-1812-75 |
109.04 | TDS Reduction | |||
| RO-B05-50G | 1812-50-NPI 1812-50-NPD CN-1812-50 |
89.01 | TDS Reduction | |||
| RO-B05-75G | 1812-75-NPI 1812-75-NPD CN-1812-75 |
109.04 | TDS Reduction | |||
| RO-R05-50G | 1812-50-NPI 1812-50-NPD CN-1812-50 |
14.29 | TDS Reduction | |||
| RO-R06-50G | 1812-50-NPI 1812-50-NPD CN-1812-50 |
89.01 | TDS Reduction | |||
| RO-R07-50G | 1812-50-NPI 1812-50-NPD CN-1812-50 |
89.01 | TDS Reduction | |||
| RO-R08-50G | 1812-50-NPI 1812-50-NPD CN-1812-50 |
89.01 | TDS Reduction | |||
| RO-R09-50G | 1812-50-NPI 1812-50-NPD CN-1812-50 |
89.01 | TDS Reduction | |||
|
COMPONENTS: Membranes[1] [G] |
||||||
| CN-3212-800 | ||||||
| 1812-100-NPD | ||||||
| 1812-100-NPI | ||||||
| 1812-30-NPD | ||||||
| 1812-30-NPI | ||||||
| 1812-50-NPD | ||||||
| 1812-50-NPI | ||||||
| 1812-75-NPD | ||||||
| 1812-75-NPI | ||||||
| 2012-100-NPD | ||||||
| 2012-100-NPI | ||||||
| 2012-150-NPD | ||||||
| 2012-150-NPI | ||||||
| 2012-180-NPD | ||||||
| 2012-180-NPI | ||||||
| 2812-200-NPD | ||||||
| 2812-200-NPI | ||||||
| 2812-300-NPD | ||||||
| 2812-300-NPI | ||||||
| 2813-300-NPD | ||||||
| 2813-300-NPI | ||||||
| 3012-300-NPD | ||||||
| 3012-300-NPI | ||||||
| 3012-400-NPD | ||||||
| 3012-400-NPI | ||||||
| 3012-500-NPD | ||||||
| 3012-500-NPI | ||||||
| 3012-600-NPD | ||||||
| 3012-600-NPI | ||||||
| 3013-400-NPD | ||||||
| 3013-400-NPI | ||||||
| 3013-600-NPD | ||||||
| 3013-600-NPI | ||||||
| AQ-1812-100 | ||||||
| AQ-1812-30 | ||||||
| AQ-1812-50 | ||||||
| AQ-1812-75 | ||||||
| AQ-2012-100 | ||||||
| AQ-2012-150 | ||||||
| AQ-2012-180 | ||||||
| AQ-2812-200 | ||||||
| AQ-2812-300 | ||||||
| AQ-2813-300 | ||||||
| AQ-3012-300 | ||||||
| AQ-3012-400 | ||||||
| AQ-3012-500 | ||||||
| AQ-3012-600 | ||||||
| AQ-3013-400 | ||||||
| AQ-3013-600 | ||||||
| CN-1808-100 | ||||||
| CN-1808-50 | ||||||
| CN-1808-75 | ||||||
| CN-1809-100 | ||||||
| CN-1809-150 | ||||||
| CN-1809-50 | ||||||
| CN-1809-75 | ||||||
| CN-1810-100 | ||||||
| CN-1810-150 | ||||||
| CN-1810-50 | ||||||
| CN-1810-75 | ||||||
| CN-1811-100 | ||||||
| CN-1811-150 | ||||||
| CN-1811-50 | ||||||
| CN-1811-75 | ||||||
| CN-1812-100 | ||||||
| CN-1812-150 | ||||||
| CN-1812-200 | ||||||
| CN-1812-250 | ||||||
| CN-1812-30 | ||||||
| CN-1812-50 | ||||||
| CN-1812-75 | ||||||
| CN-2012-100 | ||||||
| CN-2012-150 | ||||||
| CN-2012-180 | ||||||
| CN-2012-200 | ||||||
| CN-2012-300 | ||||||
| CN-2012-400 | ||||||
| CN-2812-200 | ||||||
| CN-2812-300 | ||||||
| CN-2813-300 | ||||||
| CN-3010-1000 | ||||||
| CN-3010-400 | ||||||
| CN-3010-600 | ||||||
| CN-3010-800 | ||||||
| CN-3011-1000 | ||||||
| CN-3011-400 | ||||||
| CN-3011-600 | ||||||
| CN-3011-800 | ||||||
| CN-3012-300 | ||||||
| CN-3012-400 | ||||||
| CN-3012-500 | ||||||
| CN-3012-600 | ||||||
| CN-3012-700 | ||||||
| CN-3012-800 | ||||||
| CN-3013-1000 | ||||||
| CN-3013-400 | ||||||
| CN-3013-400 | ||||||
| CN-3013-500 | ||||||
| CN-3013-600 | ||||||
| CN-3013-600 | ||||||
| CN-3013-700 | ||||||
| CN-3013-800 | ||||||
| CN-3102-1000 | ||||||
| CN-3211-1000 | ||||||
| CN-3211-600 | ||||||
| CN-3211-800 | ||||||
| CN-3212-1000 | ||||||
| CN-3212-600 | ||||||
| CN-3213-1000 | ||||||
| CN-3213-1200 | ||||||
| CN-3213-600 | ||||||
| CN-3213-800 | ||||||
| CN-3312-1000 | ||||||
| CN-3312-1000 | ||||||
| CN-3312-600 | ||||||
| CN-3312-800 | ||||||
| CN-3312-800 | ||||||
| CN-3313-1000 | ||||||
| CN-3313-600 | ||||||
| CN-3313-800 | ||||||
| CN-3413-1000 | ||||||
| CN-3413-1200 | ||||||
| CN-3413-8000 | ||||||
| CN-3513-1000 | ||||||
| CN-3513-1200 | ||||||
| CN-4013-1400 | ||||||
| CN-4013-1600 | ||||||
| Kingfiltr-1808-100 | ||||||
| Kingfiltr-1808-50 | ||||||
| Kingfiltr-1808-75 | ||||||
| Kingfiltr-1809-100 | ||||||
| Kingfiltr-1809-150 | ||||||
| Kingfiltr-1809-50 | ||||||
| Kingfiltr-1809-75 | ||||||
| Kingfiltr-1810-100 | ||||||
| Kingfiltr-1810-150 | ||||||
| Kingfiltr-1810-50 | ||||||
| Kingfiltr-1810-75 | ||||||
| Kingfiltr-1811-100 | ||||||
| Kingfiltr-1811-150 | ||||||
| Kingfiltr-1811-50 | ||||||
| Kingfiltr-1811-75 | ||||||
| Kingfiltr-1812-100 | ||||||
| Kingfiltr-1812-150 | ||||||
| Kingfiltr-1812-200 | ||||||
| Kingfiltr-1812-250 | ||||||
| Kingfiltr-1812-75 | ||||||
| Kingfiltr-2012-100 | ||||||
| Kingfiltr-2012-200 | ||||||
| Kingfiltr-2012-300 | ||||||
| Kingfiltr-2012-400 | ||||||
| Kingfiltr-2812-200 | ||||||
| Kingfiltr-2812-300 | ||||||
| Kingfiltr-3010-1000 | ||||||
| Kingfiltr-3010-400 | ||||||
| Kingfiltr-3010-600 | ||||||
| Kingfiltr-3010-800 | ||||||
| Kingfiltr-3011-1000 | ||||||
| Kingfiltr-3011-400 | ||||||
| Kingfiltr-3011-600 | ||||||
| Kingfiltr-3011-800 | ||||||
| Kingfiltr-3012-400 | ||||||
| Kingfiltr-3012-600 | ||||||
| Kingfiltr-3012-700 | ||||||
| Kingfiltr-3012-800 | ||||||
| Kingfiltr-3013-1000 | ||||||
| Kingfiltr-3013-400 | ||||||
| Kingfiltr-3013-500 | ||||||
| Kingfiltr-3013-600 | ||||||
| Kingfiltr-3013-700 | ||||||
| Kingfiltr-3013-800 | ||||||
| Kingfiltr-3211-1000 | ||||||
| Kingfiltr-3211-600 | ||||||
| Kingfiltr-3211-800 | ||||||
| Kingfiltr-3212-1000 | ||||||
| Kingfiltr-3212-600 | ||||||
| Kingfiltr-3212-800 | ||||||
| Kingfiltr-3213-1000 | ||||||
| Kingfiltr-3213-1200 | ||||||
| Kingfiltr-3213-600 | ||||||
| Kingfiltr-3213-800 | ||||||
| Kingfiltr-3312-1000 | ||||||
| Kingfiltr-3312-1000 | ||||||
| Kingfiltr-3312-600 | ||||||
| Kingfiltr-3312-800 | ||||||
| Kingfiltr-3312-800 | ||||||
| Kingfiltr-3313-1000 | ||||||
| Kingfiltr-3313-600 | ||||||
| Kingfiltr-3313-800 | ||||||
| Kingfiltr-3413-1000 | ||||||
| Kingfiltr-3413-1000 | ||||||
| Kingfiltr-3413-1200 | ||||||
| Kingfiltr-3513-1000 | ||||||
| Kingfiltr-3513-1200 | ||||||
| Kingfiltr-4013-1400 | ||||||
| Kingfiltr-4013-1600 | ||||||
| Robot-1812-100 | ||||||
| Robot-1812-30 | ||||||
| Robot-1812-50 | ||||||
| Robot-1812-75 | ||||||
| Robot-2012-100 | ||||||
| Robot-2012-150 | ||||||
| Robot-2012-180 | ||||||
| Robot-2812-200 | ||||||
| Robot-2812-300 | ||||||
| Robot-2813-300 | ||||||
| Robot-3012-300 | ||||||
| Robot-3012-400 | ||||||
| Robot-3012-500 | ||||||
| Robot-3012-600 | ||||||
| Robot-3013-400 | ||||||
| Robot-3013-600 | ||||||
|
  [1] Conforms to material requirements only.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||||
| ZHEJIANG CANATURE RUNXIN ELECTRICAL APPLIANCE CO., LTD. | |
| Ertang New Village, Zonghan Street | |
| Cixi City, Ningbo, Zhejiang 315303 | |
| China | |
| 86 138 5743 9932 |
Facility : Shanghai, China
| Replacement | Daily Production | |||||
| Brand Name / Trade Name / Model | Module | Rate (gpd) | Claim | |||
|
Plumbed-In to Separate Tap |
||||||
| RO-5-50G | 1812-50-NPD 1812-50-NPI CN-1812-50 |
89.01 | TDS Reduction | |||
| RO-5-75G | 1812-75-NPD 1812-75-NPI CN-1812-75 |
109.04 | TDS Reduction | |||
| RO-7-50G | 1812-50-NPD 1812-50-NPI CN-1812-50 |
89.01 | TDS Reduction | |||
| RO-8-50G | 1812-50-NPD 1812-50-NPI CN-1812-50 |
89.01 | TDS Reduction | |||
| RO-9-50G | 1812-50-NPD 1812-50-NPI CN-1812-50 |
89.01 | TDS Reduction | |||
Number of matching Manufacturers is 10
Number of matching Products is 814
Processing time was 1 seconds

