NSF Product and Service Listings

[1] Product evaluated and determined to comply with efficiency rating requirements defined by
[ER] Softener Efficiency indicates that the softener achieves a minimum of 3,350 grains of
     hardness removed per pound of regenerant salt (477 grams of hardness removed per
     kilogram of regenerant salt), and also that it uses 5 gallons or less of regenerant
     water per 1,000 grains of hardness removed (18.9 liters or less of regenerant water per
     64.8 grams of hardness removed).
[HR] Hardness Reduction indicates that the published capacity ratings for reducing hardness
     have been verified.
[POE] Product conforms to NSF/ANSI/CAN 61 health effects requirements.

[1] Product evaluated and determined to comply with efficiency rating requirements defined
    by California state laws.
[ER] Softener Efficiency indicates that the softener achieves a minimum of 3,350 grains of
     hardness removed per pound of regenerant salt (477 grams of hardness removed per
     kilogram of regenerant salt), and also that it uses 5 gallons or less of regenerant
     water per 1,000 grains of hardness removed (18.9 liters or less of regenerant water per
     64.8 grams of hardness removed).
[HR] Hardness Reduction indicates that the published capacity ratings for reducing hardness
     have been verified.
[POE] Product conforms to NSF/ANSI/CAN 61 health effects requirements.

[1] Product evaluated and determined to comply with efficiency rating requirements defined
    by California State laws.
[ER] Softener Efficiency indicates that the softener achieves a minimum of 3,350 grains of
     hardness removed per pound of regenerant salt (477 grams of hardness removed per
     kilogram of regenerant salt), and also that it uses 5 gallons or less of regenerant
     water per 1,000 grains of hardness removed (18.9 liters or less of regenerant water per
     64.8 grams of hardness removed).
[HR] Hardness Reduction indicates that the published capacity ratings for reducing hardness
     have been verified.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.
[POE] Product conforms to NSF/ANSI/CAN 61 health effects requirements.

[1] Product also complies with NSF/ANSI 372.
[2] Product evaluated and determined to comply with efficiency rating requirements defined
    by California state laws.
[ER] Softener Efficiency indicates that the softener achieves a minimum of 3,350 grains of
     hardness removed per pound of regenerant salt (477 grams of hardness removed per
     kilogram of regenerant salt), and also that it uses 5 gallons or less of regenerant
     water per 1,000 grains of hardness removed (18.9 liters or less of regenerant water per
     64.8 grams of hardness removed).
[HR] Hardness Reduction indicates that the published capacity ratings for reducing hardness
     have been verified.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.
[POE] Product conforms to NSF/ANSI/CAN 61 health effects requirements.

[1] Product evaluated and determined to comply with efficiency rating requirements defined
    by California state laws.
[ER] Softener Efficiency indicates that the softener achieves a minimum of 3,350 grains of
     hardness removed per pound of regenerant salt (477 grams of hardness removed per
     kilogram of regenerant salt), and also that it uses 5 gallons or less of regenerant
     water per 1,000 grains of hardness removed (18.9 liters or less of regenerant water per
     64.8 grams of hardness removed).
[HR] Hardness Reduction indicates that the published capacity ratings for reducing hardness
     have been verified.
[POE] Product conforms to NSF/ANSI 61 health effects requirements.

[1] Product also complies with NSF/ANSI 372.
[2] Product evaluated and determined to comply with efficiency rating requirements defined
    by California state laws.
[ER] Softener Efficiency indicates that the softener achieves a minimum of 3,350 grains of
     hardness removed per pound of regenerant salt (477 grams of hardness removed per
     kilogram of regenerant salt), and also that it uses 5 gallons or less of regenerant
     water per 1,000 grains of hardness removed (18.9 liters or less of regenerant water per
     64.8 grams of hardness removed).
[HR] Hardness Reduction indicates that the published capacity ratings for reducing hardness
     have been verified.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.
[POE] Product conforms to NSF/ANSI 61 health effects requirements.

[1] Product also complies with NSF/ANSI 372.
[1] Product also complies with NSF/ANSI 372.
[2] Product evaluated and determined to comply with efficiency rating requirements defined
    by California state laws.
[ER] Softener Efficiency indicates that the softener achieves a minimum of 3,350 grains of
     hardness removed per pound of regenerant salt (477 grams of hardness removed per
     kilogram of regenerant salt), and also that it uses 5 gallons or less of regenerant
     water per 1,000 grains of hardness removed (18.9 liters or less of regenerant water per
     64.8 grams of hardness removed).
[HR] Hardness Reduction indicates that the published capacity ratings for reducing hardness
     have been verified.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.
[POE] Product conforms to NSF/ANSI/CAN 61 health effects requirements.

[1] Product evaluated and determined to comply with efficiency rating requirements defined
    by California state laws.
[ER] Softener Efficiency indicates that the softener achieves a minimum of 3,350 grains of
     hardness removed per pound of regenerant salt (477 grams of hardness removed per
     kilogram of regenerant salt), and also that it uses 5 gallons or less of regenerant
     water per 1,000 grains of hardness removed (18.9 liters or less of regenerant water per
     64.8 grams of hardness removed).
[HR] Hardness Reduction indicates that the published capacity ratings for reducing hardness
     have been verified.
[POE] Product conforms to NSF/ANSI/CAN 61 health effects requirements.

* This product is intended for use only on water supplies that have been shown to be at or
  below the referenced concentration and valency of arsenic.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

* This product is intended for use only on water supplies that have been shown to be at or
  below the referenced concentration and valency of arsenic.
[1] Serial number of 180000 or higher.
[2] As of 05/28/2004.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

* This product is intended for use only on water supplies that have been shown to be at or
  below the referenced concentration and valency of arsenic.
[1] F - Prefilter
    M - Membrane
    V - VOC post filter
[2] Tested and Certified for VOC Reduction using the 51636 post filter for a 225 gallon
    capacity.
[3] Base models are Ultrefiner II-FMV.  Suffixes ( BNFP, BNFV, CHFP and CHFV) represent
    faucet type.
[4] As of 1/15/2018.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

* This product is intended for use only on water supplies that have been shown to be at or
  below the referenced concentration and valency of arsenic.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

* This product is intended for use only on water supplies that have been shown to be at or
  below the referenced concentration and valency of arsenic.
[1] As of 05/28/2004.
[2] Serial number of 180000 or higher.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

* This product is intended for use only on water supplies that have been shown to be at or
  below the referenced concentration and valency of arsenic.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

* This product is intended for use only on water supplies that have been shown to be at or
  below the referenced concentration and valency of arsenic.
[1] Model has a post filter that is also Certified to NSF/ANSI Standard 42.
[2] Product also evaluated and determined to be capable of reducing hexavalent chromium to
    meet the State of California’s maximum contaminant level of 0.010 mg/L.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

* This product is intended for use only on water supplies that have been shown to be at or
  below the referenced concentration and valency of arsenic.
[1] Certified for use with HE-II Upgrade Pump Kit Retro.
[2] System is Certified with optional 2nd RO Membrane Kit EV9970-00 or EV9969-00.
    
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

* This product is intended for use only on water supplies that have been shown to be at or
  below the referenced concentration and valency of arsenic.
[1] Certified for use with HE-II Upgrade Pump Kit Retro.
[2] System is Certified with optional 2nd RO Membrane Kit EV9970-00 or EV9969-00.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

* This product is intended for use only on water supplies that have been shown to be at or
  below the referenced concentration and valency of arsenic.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

* This product is intended for use only on water supplies that have been shown to be at or
  below the referenced concentration and valency of arsenic.

* This product is intended for use only on water supplies that have been shown to be at or
  below the referenced concentration and valency of arsenic.
[1]  Model is a reverse osmosis system and is also Certified to NSF/ANSI Standard 58.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

* This product is intended for use only on water supplies that have been shown to be at or
  below the referenced concentration and valency of arsenic.

* This product is intended for use only on water supplies that have been shown to be at or
  below the referenced concentration and valency of arsenic.

* This product is intended for use only on water supplies that have been shown to be at or
  below the referenced concentration and valency of arsenic.
[1] Serial number of 180000 or higher.
[2] As of 05/28/2004.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

* This product is intended for use only on water supplies that have been shown to be at or
  below the referenced concentration and valency of arsenic.
[3] XX= Faucet Finish
                 AB - Antique Brass
                 AW - Antique Wine
                 BK - Black
                 BN - Brushed Nickle
                 CP - Chrome Plated
                 IV - Ivory
                 ORB - Oil Rubbed Bronze
                 SN - Satin Nickle
                 WH - White

* This product is intended for use only on water supplies that have been shown to be at or
  below the referenced concentration and valency of arsenic.
[1] Associated with a data transfer protocol.  Test data results may be transferred to other
    manufacturer's systems if the systems meet requirements contained on the document
    entitled, "Data Transfer Procedure for Devices using Hydrondix Reverse Osmosis."  This
    document is available from Hydronix Water Technology.
[2] Hydro Guard HGDT-45CP
[3] Certified for a max usage of 1 UNIT/14.4L (0.07 UNITS/L)
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

* This product is intended for use only on water supplies that have been shown to be at or
  below the referenced concentration and valency of arsenic.
[1] As of 05/28/2004.
[2] Serial number of 180000 or higher.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

* This product is intended for use only on water supplies that have been shown to be at or
  below the referenced concentration and valency of arsenic.
[1] As of 05/28/2004.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

* This product is intended for use only on water supplies that have been shown to be at or
  below the referenced concentration and valency of arsenic.
[1] As of 05/28/2004.
[2] Serial number of 180000 or higher.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

* This product is intended for use only on water supplies that have been shown to be at or
  below the referenced concentration and valency of arsenic.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

* This product is intended for use only on water supplies that have been shown to be at or
  below the referenced concentration and valency of arsenic.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

* This product is intended for use only on water supplies that have been shown to be at or
  below the referenced concentration and valency of arsenic.
[1] As of 05/28/2004.
[2] Serial number of 180000 or higher.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

* This product is intended for use only on water supplies that have been shown to be at or
  below the referenced concentration and valency of arsenic.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

* This product is intended for use only on water supplies that have been shown to be at or
  below the referenced concentration and valency of arsenic.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

* This product is intended for use only on water supplies that have been shown to be at or
  below the referenced concentration and valency of arsenic.
[1] ROR2000 is a replacement kit containing RS14, CB1, and two o-rings.					
[2] ROR2050 is a replacement kit containing R200, CB1, RS14, and two o-rings.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

* This product is intended for use only on water supplies that have been shown to be at or
  below the referenced concentration and valency of arsenic.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

* This product is intended for use only on water supplies that have been shown to be at or
  below the referenced concentration and valency of arsenic.
[1] As of 05/28/2004.
[2] Serial number of 180000 or higher.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

* This product is intended for use only on water supplies that have been shown to be at or
  below the referenced concentration and valency of arsenic.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

* This product is intended for use only on water supplies that have been shown to be at or
  below the referenced concentration and valency of arsenic.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

* This product is intended for use only on water supplies that have been shown to be at or
  below the referenced concentration and valency of arsenic.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

* This product is intended for use only on water supplies that have been shown to be at or
  below the referenced concentration and valency of arsenic.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

* This product is intended for use only on water supplies that have been shown to be at or
  below the referenced concentration and valency of arsenic.
[1] As of 05/28/2004.
[2] S1340RSX-LE consists of a S1340RS, a sump and an o-ring.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

* This product is intended for use only on water supplies that have been shown to be at or
  below the referenced concentration and valency of arsenic.
[1] Model has a post filter that is also Certified to NSF/ANSI Standard 42.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

* This product is intended for use only on water supplies that have been shown to be at or
  below the referenced concentration and valency of arsenic.
[1] Serial number of 180000 or higher.
[2] As of 05/28/2004.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.