NSF Product and Service Listings

[1] Complete replacement element trade name is: Nanomesh™ Water Filter (810026146417)
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

[1] Certified for material and structural integrity requirements.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

[1] Conforms to material requirements only.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[2] Conforms to material requirements only.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Conforms to the material requirements only.
[2] Filters were tested in systems without a PID using the following capacity and flow rate
    for lead reduction per NSF/ANSI 53, and tested for Class IV Particulate Reduction per
    NSF/ANSI 42.
    CB-AF Pb 10 SX 0.5 mcr: capacity of 1275 gallons at a flow of 1 gpm.
    CB-AF BIG Pb 10 SX 0.5 mcr: capacity of 3600 gallons at a flow rate of 2.8 gpm.
    CB-AF Pb 20 SX 0.5 mcr: capacity of 2550 gallons at a flow rate of 2 gpm.
    CB-AF BIG Pb 20 SX 0.5 mcr: capacity of 7200 gallons at a flow rate of 5.6 gpm.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

[1] Certified for the following sizes: 270 - 500 mesh.
[2] Certified for a maximum use level of 250 g/L.

[5] GROHE Blue® Magnesium+Zinc
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Conforms to material requirements only.
[2] Tested to a capacity of 65 gallons for the reduction of chlorine in accordance with
    NSF/ANSI 42 and for PFOA/PFOS reduction in accordance with NSF/ANSI 53.
[3] PFOA/PFOS reduction claim evaluated to the 2021 version of NSF/ANSI Standard 53 AL
    27-Apr-2023.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

[1] Conforms to material and structural integrity requirements.

[1] Certified for material safety requirements only.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

[1] Conforms to material requirements only. 
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[2] From date code 1C38
[3] From date code 1C48
[5] From date code 1G159.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[4] From date code 1C38
[5] From date code 1C48
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[2] Conforms to material requirements only.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

[1] Conforms to material and structural integrity requirements only.
[2] Conforms to material requirement only.

[1] Conforms to the material safety only.
[2] Conforms to the material and structural integrity requirements.
[3] Tested at a flow rate of 0.528 gpm to a capacity of 200 gallons for the reduction of
    Chlorine.
[4] Tested at a flow rate of 0.66 gpm to a capacity of 300 gallons for the reduction of
    Chlorine.

[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

[1] Conforms to the material requirements only.
[2] OD - 1: 2.5, 2:4.5
    GC - 1: 1 mic,  2: 5mic, 3: 10 mic, 4: 15 mic, 5: 0.5 mic
    LC - 00: 10 inch, 51: 20 inch

[1] AP-1711
[2] Claims of capacity or rated service cycle are not applicable for mechanical filtration.

[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Conforms to the material and structural integrity requirements.
[2] Tested at a flow rate of 0.528 gpm to a capacity of 200 gallons for the reduction of
    Chlorine.
[3] Tested at a flow rate of 0.66 gpm to a capacity of 300 gallons for the reduction of
    Chlorine.
[4] Conforms to the material safety only.

(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[2] This product meets the requirements for the State of Michigan's EGLE Filter First
    program. It is Certified to NSF/ANSI Standard 42 for particulate class I reduction and
    NSF/ANSI Standard 53 for lead reduction.
[3] X is a pack size identifier, the number of filters in a package.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[3] X is a pack size identifier, the number of filters in a package.
[4] For use in all Pour-through's and Dispensers.
[5] From date code 08619PEN.
[6] PPT100WC, PPT710WC, PPT110WC, and PDI180C.

(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[2] X is a pack size identifier, the number of filters in a package.
[3] Product requires two filters to be used.

(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[2] This product meets the requirements for the State of Michigan's EGLE Filter First
    program. It is Certified to NSF/ANSI Standard 42 for particulate class I reduction and
    NSF/ANSI Standard 53 for lead reduction.
[3] X is a pack size identifier.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[2] This product meets the requirements for the State of Michigan's EGLE Filter First
    program. It is Certified to NSF/ANSI Standard 42 for particulate class I reduction and
    NSF/ANSI Standard 53 for lead reduction.
[3] X is a pack size identifier, the number of filters in a package.
    
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[3] X is a pack size identifier, the number of filters in a package.
    

(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[3] X is a pack size identifier, the number of filters in a package.
    
[4] For use in all Pour-through's and Dispensers.
[5] From date code 08619PEN.
[6] PPT100WC, PPT710WC, PPT110WC, and PDI180C

(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.

(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[2] X is a pack size identifier, the number of filters in a package.
[3] For use in all Pour-through's and Dispensers.
[4] From date code 08619PEN.
[5] PPT100WC, PPT710WC, PPT110WC, and PDI180C

(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[2]  For use in all Pour-through's and Dispensers.

(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[2] Component interchangeability within [2].
[3] Component interchangeability within [3].
[4] Component interchangeability within [4].
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

[1] Certified for material and structural integrity requirements.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

[1] Conforms to the material and structural integrity requirements.
[2] Tested at a flow rate of 0.528 gpm to a capacity of 200 gallons for the reduction of
    Chlorine.
[3] Tested at a flow rate of 0.66 gpm to a capacity of 300 gallons for the reduction of
    Chlorine.
[4] Conforms to the material safety only.

(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

[1] Conforms to material and structural integrity requirements only.
[2] Conforms to Material Safety requirements only.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Conforms to material and structural integrity requirements only.
[2] Conforms to Material Safety requirements only.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[2] From date code 1C38
[3] From date code 1C48
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[2] From date code 1C38
[3] From date code 1C48
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[2] From date code 1C38
[3] From date code 1C48
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

[1] Model is a reverse osmosis system and is also Certified to NSF/ANSI Standard 58.
[2] Replacement name: ECO SEDIMENT FILTER, ECO PRE CARBON BLOCK FILTER, ECO RO MEMBRANE
    FILTER(50GPD, 75GPD), ECO POST CARBON BLOCK FILTER
[3] ECO PRE CARBON BLOCK FILTER, ECO RO MEMBRANE FILTER(50GPD, 75GPD), ECO POST CARBON BLOCK
    FILTER
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

[1] The carbon source is coconut shell.
[2] Certified for mesh sizes A x B: A - 12 to 40 mesh, B - 20 to 50 mesh.
[3] Certified for mesh sizes A x B: A - 30 to 80 mesh, B - 80 to 325 mesh.
[4] Certified for mesh size -325 mesh.
[5] Certified for mesh size A - 60 to 325 mesh.
[6] XX and YY represent a subset: wash type, customer, market, processing methods, intended
    application, activity level, special testing or other customer or product specific
    differentiation.

[1] Conforms to material requirements only.
[2] "WW" refers to the water wash post treatment process.
[3] "AW" refers to the acid wash post treatment process.

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Conforms to the material and structural integrity requirements only.

[1] XX - WW or YY or GG or LW or RR or TW or BB				
    Z  - W or B				
    Note: W - White, Y - Yellow, G - Green, L - Light blue, R - Red, T - Transparent, B -
    Blue

(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[2] AP-1711

[1] Conforms to material requirements.  Cartridges require a 5 minute flushing procedure.
[2] (Y) Cartridge height: 10", 20", 30", and 40".

[1] Conforms to the material requirements only.
[2] U denotes U type carbon block 
    Blank denotes Through type carbon block
    OD denotes the outer diameter (mm):
    U Type
    18.5
    21
    40
    Through Type
    40
    45
    50
    60
    64
    70
    77
    100
    106
    ID denotes the inner diameter (mm):
    U Type
    10
    25
    Through Type
    12.7
    19
    25
    32
    60
    L denotes the length (mm) (050 - 280)

(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[5] Model is a reverse osmosis system and is also Certified to NSF/ANSI Standard 58.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.

(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.