NSF Product and Service Listings

These NSF Official Listings are current as of Friday, April 12, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/DWTU/Listings.asp?PlantCountry=UNITED+KINGDOM&hdModlStd=ModlStd&

Note: Certain claims, such as Arsenic (Pentavalent) Reduction, appear as active links, allowing you to access additional information regarding the specific contaminants.


NSF/ANSI 42
Drinking Water Treatment Units - Aesthetic Effects


 
Doulton Water Filters 
Unit 4 Lymedale Cross Industrial Estate
Newcastle-Under-Lyme 
Staffordshire ST5 9BT 
United Kingdom 
44 178 266 4430
Visit this company's website

Facility : Staffordshire, United Kingdom

  Replacement Service Cycle Flow Rate  
Brand Name / Trade Name / Model Element (gallons) (gpm)   Claim

Plumbed-In to Separate Tap
Ecofast Biotect Ultra Inline[Pb] Biotect Ultra
W9123050
600 .5   Chlorine Reduction
Nominal Particulate Reduction, Class I
Taste and Odor Reduction
Ecofast Biotect Ultra SI Inline[Pb] Biotect UltraSI 600(1) .5   Taste and Odor Reduction
Chlorine Reduction
Nominal Particulate Reduction, Class I
Ecofast Ultracarb Inline[Pb] W9123053
Ultracarb
600(1) .5   Chlorine Reduction
Nominal Particulate Reduction, Class I
Taste and Odor Reduction
HIP/Sterasyl Inline[Pb] W9120562
Sterasyl
(1) 1.05   Nominal Particulate Reduction, Class I
HIP/Ultracarb Inline[Pb] W9123053
Ultracarb
600(1) .5   Chlorine Reduction
Nominal Particulate Reduction, Class I
Taste and Odor Reduction
HIP Biotect Ultra Inline[Pb] Biotect Ultra
W9123050
600 .5   Chlorine Reduction
Nominal Particulate Reduction, Class I
Taste and Odor Reduction
HIP Biotect Ultra SI Inline[Pb] Biotect UltraSI 600(1) .5   Chlorine Reduction
Nominal Particulate Reduction, Class I
Taste and Odor Reduction
QT Ultracarb Inline[Pb] W9123053
Ultracarb
600(1) .5   Chlorine Reduction
Nominal Particulate Reduction, Class I
Taste and Odor Reduction
QT1 Biotect Ultra Inline[Pb] Biotect Ultra
W9123050
600 .5   Chlorine Reduction
Nominal Particulate Reduction, Class I
Taste and Odor Reduction

   
(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

Pour Through [Pb]
British Berkefeld SS2 Ultra Sterasyl Ultra Sterasyl
W9121226
(1) N/A   Nominal Particulate Reduction, Class I

   
(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

Replacement Element: Plumbed-In to Separate Tap [2] [Pb]
Biotect Ultra SI[7] N/A 600(1) .5   Chlorine Reduction
Nominal Particulate Reduction, Class I
Taste and Odor Reduction
Biotect Ultra W9123050[3] N/A 600(1) .5   Chlorine Reduction
Nominal Particulate Reduction, Class I
Taste and Odor Reduction
Biotect Ultracarb W9123070[4] N/A 600(1) .5   Chlorine Reduction
Nominal Particulate Reduction, Class I
Taste and Odor Reduction
Sterasyl W9120562[5] N/A (1) 1.05   Nominal Particulate Reduction, Class I
Ultracarb W9123053[6] N/A 600(1) .5   Chlorine Reduction
Nominal Particulate Reduction, Class I
Taste and Odor Reduction

   
(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[2] Conforms to material requirements.
[3] Compatible with the following systems: Ecofast Biotect Ultra Inline; HIP Biotect Ultra
    Inline; HIP-CT Biotect Ultra
[4] Compatible with the following system: HIP-CT Biotect Ultracarb
[5] Compatible with the following system: HIP/Sterasyl Inline
[6] Compatible with the following systems: Ecofast Ultracarb Inline; HIP/Ultracarb Inline;
    QT Ultracarb Inline
[7] Compatible with the following systems: Ecofast Biotect Ultra SI Inline, HIP Biotect
    Ultra SI Inline.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

Replacement Element: Pour Through [Pb]
Ultra Sterasyl W9121226[8] N/A (1) N/A   Nominal Particulate Reduction, Class I

   
(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[8] Compatible with the following system: British Berfefeld SS2 Ultrasterasyl.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

COMPONENTS: Filter Cartridges[2]
5504[Pb]  
9204[Pb]  
2504[Pb]  
9504[Pb]  
Standard  

   
[2] Conforms to material requirements.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

NOTE: Manufactured by Fairey Industrial Ceramics Ltd.


 
Franke Kitchen Systems Division - Franke Luxury Products Group 
800 Aviation Parkway
Smyrna, PA 37167 
United States 
800-626-5771

Facility : # 1 United Kingdom

  Replacement Service Cycle Flow Rate  
Brand Name / Trade Name / Model Element (gallons) (gpm)   Claim

Plumbed-In to Separate Tap
FRCNSTR/FRC06[Pb] FRC06 600(1) .5   Chlorine Reduction
Nominal Particulate Reduction, Class I
Taste and Odor Reduction
FRCNSTR100/FRC06[Pb] FRC06 600(1) .5   Chlorine Reduction
Nominal Particulate Reduction, Class I
Taste and Odor Reduction
FRXNSTR/FRX02[Pb] FRX02 600(1) .5   Chlorine Reduction
Nominal Particulate Reduction, Class I
Taste and Odor Reduction

   
(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.



 
KLT Filtration DBA Coldstream 
Estuary Road
Kings Lynn, Norfolk PE30 2HS 
United Kingdom 
44 15 5362 2007
Visit this company's website

Facility : Norfolk, United Kingdom

 
           

COMPONENTS: Filter Cartridges[1]
Coldstream (CF102W)  
Coldstream (CF504W)  
Coldstream (CF701W)  
Coldstream Sentry (CF115W)  

   
[1] Conforms to material requirements only.



 
Parker Hannifin Mfg France SAS 
TVA FR 79 523 394 724
74 Rue de Paris - BP 70411 
35704 Rennes Cedex 7 
France 
33 299 255500
Visit this company's website

Facility : Northern Ireland, United Kingdom

 
           

COMPONENTS: Tubing[1] [2]
1AAAYBBFZZDD  

   
[1] Conforms to material and structural integrity requirements only.
[2] 1:  Internal Legris SA reference to tubing products. 
    AAA: Spool length sold to customers that range from 1-1000 meters.
    Y:  Internal Legris SA reference to the base material.
    BB:  Outside diameter (O.D.) of tubing (with standard inner diameter (I.D.)).
    04 - 4mm (with I.D. 2.5 mm)
    06 - 6mm (with I.D. 4 mm)
    08 - 8mm (with I.D. 6 mm)
    10 - 10mm (with I.D. 7 mm)
    12 - 12mm (with I.D. 9 mm)
    56 - 1/4" (with I.D. 4.32 mm)
    60 - 3/8" (with I.D. 6.35 mm)
    62 - 1/2" (with I.D. 9.55 mm)
    F:  Internal Legris SA reference for FDA approval.
    ZZ:  Color of tubing.
    00 - natural
    01 - black
    02 - green
    03 - red
    04 - blue
    05 - yellow
    07 - orange
    09 - purple
    10 - white
    DD:  Inner diameter (I.D.) of tubing; only used if inner diameter is different than the
    standard measurement. The inner diameter will range from 1.8 mm to 9.9 mm (18-99).



 
ProOne® Water Filters 
1200 Benstein Road
Commerce Township, MI 48390 
United States 
800-544-3533 
248-255-0200
Visit this company's website

Facility : # 1 U

 
           

COMPONENTS: Filter Cartridges[1]
ProOne G2.0 4" (M)  
ProOne G2.0 5"  
ProOne G2.0 5" SL  
ProOne G2.0 7"  
ProOne G2.0 7" SL  
ProOne G2.0 9"  
ProOne G2.0 9" SL  

   
[1] Conforms to material requirements only.



 
Superior Seals Ltd. 
8, Nimrod Way
Ferndown Industrial Estate 
Wimborne, Dorset BH21 7SH 
United Kingdom 
44 120 285 4300

Facility : Dorset, United Kingdom

 
           

COMPONENTS: Gasket/Sealing Material[1] [Pb]
EP1/1/5 BLK[2]  
EP2480 BLK[3]  

   
[1] Conforms to material requirements only.
[2] Certified for a maximum surface area to volume ratio of 5.5 square inches/L.
[3] Certified for a maximum surface area to volume ratio of 4.5 square inches/L.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

COMPONENTS: O-Ring[1] [Pb]
EP1/1/5 BLK[2]  
EP2480 BLK[3]  

   
[1] Conforms to material requirements only.
[2] Certified for a maximum surface area to volume ratio of 5.5 square inches/L.
[3] Certified for a maximum surface area to volume ratio of 4.5 square inches/L.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.


NSF/ANSI 53
Drinking Water Treatment Units - Health Effects



 
Doulton Water Filters 
Unit 4 Lymedale Cross Industrial Estate
Newcastle-Under-Lyme 
Staffordshire ST5 9BT 
United Kingdom 
44 178 266 4430
Visit this company's website

Facility : Staffordshire, United Kingdom

  Replacement Service Cycle Flow Rate  
Brand Name / Trade Name / Model Element (gallons) (gpm)   Claim

Plumbed-In to Separate Tap
Ecofast Biotect Ultra Inline[Pb] Biotect Ultra
W9123050
600 .5   Cyst Reduction
Lead Reduction
Turbidity Reduction
Ecofast Biotect Ultra SI Inline[Pb] Biotect UltraSI 600(1) .5   Cyst Reduction
Lead Reduction
Turbidity Reduction
Ecofast Ultracarb Inline[Pb] W9123053
Ultracarb
600(1) .5   Cyst Reduction
Lead Reduction
Turbidity Reduction
HIP/Sterasyl Inline[Pb] W9120562
Sterasyl
(1) 1.05   Cyst Reduction
Turbidity Reduction
HIP/Ultracarb Inline[Pb] W9123053
Ultracarb
600(1) .5   Cyst Reduction
Lead Reduction
Turbidity Reduction
HIP Biotect Ultra Inline[Pb] Biotect Ultra
W9123050
600 .5   Cyst Reduction
Lead Reduction
Turbidity Reduction
HIP Biotect Ultra SI Inline[Pb] Biotect UltraSI 600(1) .5   Cyst Reduction
Lead Reduction
Turbidity Reduction
QT Ultracarb Inline[Pb] W9123053
Ultracarb
600(1) .5   Cyst Reduction
Lead Reduction
Turbidity Reduction
QT1 Biotect Ultra Inline [Pb] Biotect Ultra
W9123050
600(1) .5   Cyst Reduction
Lead Reduction
Turbidity Reduction

   
(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

Pour Through [Pb]
British Berkefeld SS2 Ultra Sterasyl Ultra Sterasyl
W9121226
(1) N/A   Cyst Reduction
Turbidity Reduction

   
(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

Replacement Element: Plumbed-In to Separate Tap [2] [Pb]
Biotect Ultra SI[7] N/A 600(1) .5   Cyst Reduction
Lead Reduction
Turbidity Reduction
Biotect Ultra W9123050[3] N/A 600(1) .5   Cyst Reduction
Lead Reduction
Turbidity Reduction
Biotect Ultracarb W9123070[4] N/A 600(1) .5   Cyst Reduction
Lead Reduction
Turbidity Reduction
Sterasyl W9120562[5] N/A (1) 1.05   Cyst Reduction
Turbidity Reduction
Ultracarb W9123053[6] N/A 600(1) .5   Cyst Reduction
Lead Reduction
Turbidity Reduction

   
(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[2] Conforms to material requirements.
[3] Compatible with the following systems: Ecofast Biotect Ultra Inline; HIP Biotect Ultra
    Inline; HIP-CT Biotect Ultra
[4] Compatible with the following system: HIP-CT Biotect Ultracarb
[5] Compatible with the following system: HIP/Sterasyl Inline
[6] Compatible with the following systems: Ecofast Ultracarb Inline; HIP/Ultracarb Inline;
    QT Ultracarb Inline
[7] Compatible with the following systems: Ecofast Biotect Ultra SI Inline,  HIP Biotect
    Ultra SI Inline.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

Replacement Element: Pour Through [2] [Pb]
Ultra Sterasyl W9121226[8] N/A (1) N/A   Cyst Reduction
Turbidity Reduction

   
(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[2] Conforms to material requirements.
[8] Compatible with the following system: British Berfefeld SS2 Ultrasterasyl.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

NOTE: Manufactured by Fairey Industrial Ceramics Ltd.


 
Franke Kitchen Systems Division - Franke Luxury Products Group 
800 Aviation Parkway
Smyrna, PA 37167 
United States 
800-626-5771

Facility : # 1 United Kingdom

  Replacement Service Cycle Flow Rate  
Brand Name / Trade Name / Model Element (gallons) (gpm)   Claim

Plumbed-In to Separate Tap
FRCNSTR/FRC06[Pb] FRC06 600(1) .5   Cyst Reduction
Lead Reduction
Turbidity Reduction
FRCNSTR100/FRC06[Pb] FRC06 600(1) .5   Cyst Reduction
Lead Reduction
Turbidity Reduction
FRXNSTR/FRX02[Pb] FRX02 600(1) .5   Cyst Reduction
Lead Reduction
Turbidity Reduction

   
(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.


NSF/ANSI 58
Reverse Osmosis Drinking Water Treatment Systems



 
Parker Hannifin Mfg France SAS 
TVA FR 79 523 394 724
74 Rue de Paris - BP 70411 
35704 Rennes Cedex 7 
France 
33 299 255500
Visit this company's website

Facility : Northern Ireland, United Kingdom

             

COMPONENTS: Tubing[1] [2]
1AAAYBBFZZDD    

   
[1] Conforms to material and structural integrity requirements only.
[2] 1:  Internal Legris SA reference to tubing products. 
    AAA: Spool length sold to customers that range from 1-1000 meters.
    Y:  Internal Legris SA reference to the base material.
    BB:  Outside diameter (O.D.) of tubing (with standard inner diameter (I.D.)).
    04 - 4mm (with I.D. 2.5 mm)
    06 - 6mm (with I.D. 4 mm)
    08 - 8mm (with I.D. 6 mm)
    10 - 10mm (with I.D. 7 mm)
    12 - 12mm (with I.D. 9 mm)
    56 - 1/4" (with I.D. 4.32 mm)
    60 - 3/8" (with I.D. 6.35 mm)
    62 - 1/2" (with I.D. 9.55 mm)
    F:  Internal Legris SA reference for FDA approval.
    ZZ:  Color of tubing.
    00 - natural
    01 - black
    02 - green
    03 - red
    04 - blue
    05 - yellow
    07 - orange
    09 - purple
    10 - white
    DD:  Inner diameter (I.D.) of tubing; only used if inner diameter is different than the
    standard measurement. The inner diameter will range from 1.8 mm to 9.9 mm (18-99).


Number of matching Manufacturers is 9
Number of matching Products is 60
Processing time was 0 seconds